summaryrefslogtreecommitdiff
path: root/arch/x86/dts
Commit message (Collapse)AuthorAgeLines
* x86: Add congatec conga-QA3/E3845-4G (Bay Trail) supportStefan Roese2016-03-17-0/+279
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the congatec conga-QA3/E3845-4G eMMC8 SoM, installed on the congatec Qseven 2.0 evaluation carrier board (conga-QEVAL). Its port is very similar to the MinnowboardMAX port and also uses the Intel FSP as described in doc/README.x86. Currently supported are the following interfaces / devices: - UART (via Winbond legacy SuperIO chip on carrier board) - Ethernet (PCIe Intel I210 / E1000) - SPI including SPI NOR as boot-device - USB 2.0 - SATA via U-Boot SCSI IF - eMMC - Video (HDMI output @ 800x600) - PCIe Not supported yet is: - I2C - USB 3.0 Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add support for the samus chromebookSimon Glass2016-03-17-0/+629
| | | | | | | | | | | | | | | | | | | | | | | This adds basic support for chromebook_samus. This is the 2015 Pixel and is based on an Intel broadwell platform. Supported so far are: - Serial - SPI flash - SDRAM init (with MRC cache) - SATA - Video (on the internal LCD panel) - Keyboard Various less-visible drivers are provided to make the above work (e.g. PCH, power control and LPC). The platform requires various binary blobs which are documented in the README. The major missing feature is USB3 since the existing U-Boot support does not work correctly with Intel XHCI controllers. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: dts: Drop memory SPD compatible stringSimon Glass2016-03-17-1/+0
| | | | | | | | This is not needed now that the memory controller driver has the SPD data in its own node. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: link: Add pin configuration to the device treeSimon Glass2016-03-17-0/+155
| | | | | | | | | | | | At present pin configuration on link does not use the standard mechanism, but some rather ugly custom code. As a first step to resolving this, add the pin configuration to the device tree. Four of the GPIOs must be available before relocation (for SDRAM pin strapping). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: broadwell: Add a few microcode filesSimon Glass2016-03-17-0/+2272
| | | | | | | Add two microcode files for broadwell. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Bin Meng <bmeng.cn@gmail.com>
* x86: dts: link: Add board ID GPIOsSimon Glass2016-03-17-0/+2
| | | | | | | | At present the board ID GPIOs are hard-coded. Move them to the device tree so that we can use general SDRAM init code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: dts: link: Move SPD info into the memory controllerSimon Glass2016-03-17-111/+110
| | | | | | | | | | | The SDRAM SPD (Serial Presence Detect) information should be contained with the SDRAM controller. This makes it easier for the controller to access it and removes the need for a separate compatible string. As a first step, move the information. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: link: Add required GPIO propertiesSimon Glass2016-03-17-3/+9
| | | | | | | | In order to use GPIO phandles we need to add some GPIO properties as specified by the GPIO bindings. Add these for link. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add Intel Cougar Canyon 2 boardBin Meng2016-02-21-0/+105
| | | | | | | | | This adds basic support to Intel Cougar Canyon 2 board, a board based on Chief River platform with an Ivy Bridge processor and a Panther Point chipset. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: minnowmax: Drop io-base property in the pch_pinctrl nodeBin Meng2016-02-05-1/+0
| | | | | | | | IOBASE is now obtained from PCH driver, drop this <io-base> property. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* x86: ich6_gpio: Convert to use proper DM APIBin Meng2016-02-05-153/+163
| | | | | | | | | | | | | | | | At present this GPIO driver still uses the legacy PCI API. Now that we have proper PCH drivers we can use those to obtain the information we need. While the device tree has nodes for the GPIO peripheral it is not in the right place. It should be on the PCI bus as a sub-peripheral of the PCH device. Update the device tree files to show the GPIO controller within the PCH, so that PCI access works as expected. This also adds '#address-cells' and '#size-cells' to the PCH node. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* spi: ich: Use compatible strings to distinguish controller versionBin Meng2016-02-05-7/+7
| | | | | | | | | | At present ich spi driver gets the controller version information via pch, but this can be simply retrieved via spi node's compatible string. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jteki@openedev.com> Tested-by: Simon Glass <sjg@chromium.org>
* x86: Correct spi node aliasBin Meng2016-01-28-14/+14
| | | | | | | | With recent changes spi node was moved to a place as a subnode under pch, so update the alias to refer to its correct place as well. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* x86: ivybridge: Use syscon for the GMA deviceSimon Glass2016-01-24-1/+2
| | | | | | | | | Until we have a proper video uclass we can use syscon to handle the GMA device, and avoid the special device tree and PCI searching. Update the code to work this way. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ivybridge: Drop special EHCI initSimon Glass2016-01-24-0/+12
| | | | | | | | | | This is not needed. On reset wake-on-disconnect is already set. It may a problem during a soft reset or resume, but for now it does not seem important. Also drop the command register update since PCI auto-config does it for us. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ivybridge: Convert SDRAM init to use driver modelSimon Glass2016-01-24-0/+6
| | | | | | | | | SDRAM init needs access to the Northbridge controller and the Intel Management Engine device. Add the latter to the device tree and convert all of this code to driver model. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ivybridge: Use the I2C driver to perform SMbus initSimon Glass2016-01-24-0/+6
| | | | | | | | Move the init code into the I2C driver. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ivybridge: Drop the special PCI driverSimon Glass2016-01-24-1/+1
| | | | | | | | There is nothing special about the ivybridge pci driver now, so just use the generic one. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ivybridge: Do the SATA init before relocationSimon Glass2016-01-24-7/+9
| | | | | | | | | The SATA device needs to set itself up so that it appears correctly on the PCI bus. The easiest way to do this is to set it up to probe before relocation. This can do the early setup. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ivybridge: Use common CPU init codeSimon Glass2016-01-24-0/+34
| | | | | | | | | The existing ivybridge code predates the normal multi-core CPU init, and it is not used. Remove it and add CPU nodes to the device tree so that all four CPUs are set up. Also enable the 'cpu' command. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ivybridge: Add a driver for the bd82x6x northbridgeSimon Glass2016-01-24-0/+7
| | | | | | | | Add a driver with an empty probe function where we can move init code in follow-on patches. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ivybridge: Move lpc_early_init() to probe()Simon Glass2016-01-24-2/+1
| | | | | | | | Move this code to the LPC's probe() method so that it will happen automatically when the LPC is probed before relocation. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ivybridge: Set up the LPC device using driver modelSimon Glass2016-01-24-0/+1
| | | | | | | | | | Find the LPC device in arch_cpu_init_dm() as a first step to converting this code to use driver model. Probing the LPC will probe its parent (the PCH) automatically, so make sure that probing the PCH does nothing before relocation. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* dm: x86: queensbay: Add an interrupt driverSimon Glass2016-01-24-1/+1
| | | | | | | | | Add a driver for interrupts on queensbay and move the code currently in cpu_irq_init() into its probe() method. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* dm: x86: quark: Add an interrupt driverSimon Glass2016-01-24-1/+1
| | | | | | | | | Add a driver for interrupts on quark and move the code currently in cpu_irq_init() into its probe() method. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* dm: x86: spi: Convert ICH SPI driver to driver model PCI APISimon Glass2016-01-24-323/+371
| | | | | | | | | | | | | | | | | | | | | | | | | At present this SPI driver works by searching the PCI buses for its peripheral. It also uses the legacy PCI API. In addition the driver has code to determine the type of Intel PCH that is used (version 7 or version 9). Now that we have proper PCH drivers we can use those to obtain the information we need. While the device tree has a node for the SPI peripheral it is not in the right place. It should be on the PCI bus as a sub-peripheral of the LPC device. Update the device tree files to show the SPI controller within the PCH, so that PCI access works as expected. This patch includes Bin's fix-up patch from here: https://patchwork.ozlabs.org/patch/569478/ Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* x86: qemu: remove cpu node in device treeMiao Yan2016-01-13-14/+0
| | | | | | | | | Remove 'cpu' node in device tree for QEMU targets, and let U-Boot detect and fix up those information at runtime. Signed-off-by: Miao Yan <yanmiaobest@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: qemu: add a cpu uclass driver for qemu targetMiao Yan2016-01-13-4/+4
| | | | | | | | | | | | | | | Add a cpu uclass driver for qemu. Previously, the qemu target gets cpu number from board dts files, which are manually created at compile time. This does not scale when more cpus are assigned to guest as the dts files must be modified as well. This patch adds a cpu uclass driver for qemu targets to directly read online cpu number from firmware. Signed-off-by: Miao Yan <yanmiaobest@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ivybridge: Add microcode blobs for all the steppingsBin Meng2016-01-13-0/+2472
| | | | | | | | | | | This adds microcode blobs created from Intel FSP package for the Chief River platform. They are for all the Ivy Bridge steppings: 306a2 (B0), 306a4 (C0), 306a5 (K0/M0), 306a8 (E0/L0), except the 306a9 which is already in the U-Boot tree. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* x86: Fix PCI UART compatible string for crownbay and galileoBin Meng2015-12-09-5/+5
| | | | | | | | | With recent ns16550 driver changes, we only changed the legacy UART (at I/O port 0x3f8) compatible string, but forgot to change the PCI UART compatible string. Now fix it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Convert to use driver model timerBin Meng2015-12-01-0/+32
| | | | | | | Convert all x86 boards to use driver model tsc timer. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* ns16550: unify serial_x86Thomas Chou2015-11-20-1/+1
| | | | | | | | | Unify serial_x86, and use the generic binding. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: qemu: Convert to use driver model keyboardBin Meng2015-11-19-0/+2
| | | | | | | Convert to use driver model keyboard on QEMU. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: crownbay: Convert to use driver model keyboardBin Meng2015-11-19-0/+1
| | | | | | | Convert to use driver model keyboard on Intel Crown Bay. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Add an i8042 device for boards that have itSimon Glass2015-11-19-0/+11
| | | | | | | | | | | | Some boards have an i8042 device. Enable the driver for all x86 boards, and add a device tree node for those which may have this keyboard. Also adjust the configuration so that i8042 is always separate from the VGA, and rename the stdin driver accordingly. With this commit the keyboard will not work, but it is fixed in the next commit. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* Various Makefiles: Add SPDX-License-Identifier tagsTom Rini2015-11-10-0/+4
| | | | | | | | | | | After consulting with some of the SPDX team, the conclusion is that Makefiles are worth adding SPDX-License-Identifier tags too, and most of ours have one. This adds tags to ones that lack them and converts a few that had full (or in one case, very partial) license blobs into the equivalent tag. Cc: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* x86: Add support for Advantech SOM-6896George McCollister2015-10-21-1/+45
| | | | | | | | | | | | | | | Advantech SOM-6896 is a Broadwell U based COM Express Compact Module Type 6. This patch adds support for it as a coreboot payload. On board SATA and SPI are functional. On board Ethernet isn't functional but since it's optional and ties up a PCIe x4 that is otherwise brought out, this isn't a concern at the moment. USB doesn't work since the xHCI driver appears to be broken. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* x86: galileo: Enable mrc cacheBin Meng2015-10-21-0/+4
| | | | | | | | Now that we have added MRC cache on quark support codes, enable it on Intel Galileo board. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Remove unused rw-mrc-cache properties in the link and panther dts filesBin Meng2015-10-21-5/+0
| | | | | | | | | "type" and "wipe-value" are never used by the mrccache codes. Remove them to avoid confusion. This also removes the alignment comment in the panther dts file. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Enable mrc cache for bayleybay and minnowmaxBin Meng2015-10-21-0/+12
| | | | | | | | | | | | Now that we have added MRC cache for Intel FSP and BayTrail codes, enable it for all BayTrail boards (Bayley Bay and Minnow Max). Note it turns out that FSP for Intel Atom E6xx does not produce the HOB for NV storage, so we don't have such functionality on Intel Crown Bay board. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: galileo: Add PCIe root port IRQ routingBin Meng2015-09-16-0/+12
| | | | | | | | Now we have enabled PCIe root port on Quark SoC, add its PIRQ routing information in the device tree as well. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Convert to use driver model pci on quark/galileoBin Meng2015-09-09-2/+6
| | | | | | | Move to driver model pci for Intel quark/galileo. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: panther: Add PCI and video configurationSimon Glass2015-09-09-0/+10
| | | | | | | | | Add a PCI node to the device tree. This allows SPI flash and SATA to work correctly. Also configure the video to come up correctly even though there is no keyboard. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* exynos: x86: dts: Add tpm nodes to the device tree for Chrome OS devicesSimon Glass2015-08-31-0/+10
| | | | | | | | | Add a TPM node to the various Chromebooks so that driver can be converted to driver model. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Christophe Ricard<christophe-h.ricard@st.com> Reviewed-by: Heiko Schocher <hs@denx.de>
* x86: crownbay: Support Topcliff integrated pci uart devices with driver modelBin Meng2015-08-26-5/+10
| | | | | | | | | | | | | | | In order to make a pci uart device node to be properly bound to its driver, we need make sure its parent node has a compatible string which matches a driver that scans all of its child device nodes in the device tree. Change all pci bridge nodes under root pci node to use "pci-bridge" compatible driver, as well as corresponding <reg> properties to indicate its devfn. At last, adding "u-boot,dm-pre-reloc" to each of these nodes for driver model to initialize them before relocation. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: crownbay: Enable on-board SMSC superio keyboard controllerBin Meng2015-08-26-1/+1
| | | | | | | | | | | | | | | So far we only enabled one legacy serial port on the SMSC LPC47m superio chipset on Intel Crown Bay board. As the board also has dual PS/2 ports routed out, enable the keyboard controller which is i8042 compatible so that we can use PS/2 keyboard and mouse. In order to make PS/2 keyboard work with the VGA console, remove CONFIG_VGA_AS_SINGLE_DEVICE. To boot Linux kernel with PIC mode using PIRQ routing table, adjust the mask in the device tree to reserve irq12 which is used by PS/2 mouse. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* x86: minnowmax: Correct pad-offset value for host_en1Simon Glass2015-08-26-1/+1
| | | | | | | This should be 0x250, not 0x258. Fix it. Reported-by: Andrew Bradford <andrew.bradford@kodakalaris.com> Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: minnowmax: Add access to GPIOs E0, E1, E2Simon Glass2015-08-26-0/+27
| | | | | | | These GPIOs are accessible on the pin header. Add pinctrl settings for them so that we they can be adjusted using the 'gpio' command. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: baytrail: Support multiple microcode copiesBin Meng2015-08-26-0/+9
| | | | | | | | | | | | Intel FSP has the capability to walk through the microcode blocks which are passed as the TempRamInit() parameter from U-Boot and finds the most appropriate microcode which is suitable for the cpu on which it is running. Now we've seen several steppings for Intel BayTrail series processors, adding those microcodes to the Intel BayleyBay and MinnowMax board device tree files. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: baytrail: Add microcode for BayTrail-I D0 steppingBin Meng2015-08-26-0/+3284
| | | | | | | | This commit adds the microcode blob for BayTrail-I D0 stepping, CPUID signature 30679h. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Simon Glass <sjg@chromium.org>