summaryrefslogtreecommitdiff
path: root/arch/x86/cpu
Commit message (Collapse)AuthorAgeLines
* x86: baytrail: pci region 3 is not always mapped to end of ramAndrew Bradford2015-06-04-1/+1
| | | | | | | | | | | | Baytrail physically maps the first 2 GB of SDRAM from 0x0 to 0x7FFFFFFF and additional SDRAM is mapped from 0x100000000 and up. There is a physical memory hole from 0x80000000 to 0xFFFFFFFF for other uses. Because of this, PCI region 3 should only try to use up to the amount of SDRAM or 0x80000000, which ever is less. Signed-off-by: Andrew Bradford <andrew.bradford@kodakalaris.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: qemu: Implement PIRQ routingBin Meng2015-06-04-0/+13
| | | | | | | | | Support QEMU PIRQ routing via device tree on both i440fx and q35 platforms. With this commit, Linux booting on QEMU from U-Boot has working ATA/SATA, USB and ethernet. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: coreboot: Control I/O port 0xb2 writing via device treeBin Meng2015-06-04-3/+9
| | | | | | | | | | Writing 0xcb to I/O port 0xb2 (Advanced Power Management Control) causes U-Boot to hang on QEMU q35 target. We introduce a config option in the device tree "u-boot,no-apm-finalize" under /config node if we don't want to do that. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: coreboot: Fix cosmetic issuesBin Meng2015-06-04-24/+3
| | | | | | | Clean up arch/x86/cpu/coreboot.c to fix several cosmetic issues. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: qemu: Adjust VGA initializationBin Meng2015-06-04-19/+15
| | | | | | | | | | | | | As VGA option rom needs to run at C segment, although QEMU PAM emulation seems to only guard E/F segments, for correctness, move VGA initialization after PAM decode C/D/E/F segments. Also since we already tested QEMU targets to differentiate I440FX and Q35 platforms, change to locate the VGA device via hardcoded b.d.f instead of dynamic search for its vendor id & device id pair. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: qemu: Enable legacy IDE I/O ports decodeBin Meng2015-06-04-0/+14
| | | | | | | | | QEMU always decode legacy IDE I/O ports on PIIX chipset. However Linux ata_piix driver does sanity check to see whether legacy ports decode is turned on. To make Linux ata_piix driver happy, turn on the decode via IDE_TIMING register. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: qemu: Turn on legacy segments decodeBin Meng2015-06-04-0/+20
| | | | | | | | | By default the legacy segments C/D/E/F do not decode to system RAM. Turn on the decode via Programmable Attribute Map (PAM) registers so that we can write configuration tables in the F segment. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Do sanity test on pirq table before writingBin Meng2015-06-04-0/+3
| | | | | | | | | If pirq_routing_table points to NULL, that means U-Boot fails to generate the table before in create_pirq_routing_table(), so we test it against NULL before actually writing it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: quark: Implement PIRQ routingBin Meng2015-06-04-0/+31
| | | | | | | | | Intel Quark SoC has the same interrupt routing mechanism as the Queensbay platform, only the difference is that PCI devices' INTA/B/C/D are harcoded and cannot be changed freely. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Refactor PIRQ routing supportBin Meng2015-06-04-245/+253
| | | | | | | | | | | | PIRQ routing is pretty much common in Intel chipset. It has several PIRQ links (normally 8) and corresponding registers (either in PCI configuration space or memory-mapped IBASE) to configure the legacy 8259 IRQ vector mapping. Refactor current Queensbay PIRQ routing support using device tree and move it to a common place, so that we can easily add PIRQ routing support on a new platform. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: qemu: Add graphics supportBin Meng2015-06-04-1/+23
| | | | | | | | It turns out that QEMU x86 emulated graphic card has a built-in option ROM which can be run perfectly with native mode by U-Boot. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Support QEMU x86 targetsBin Meng2015-06-04-0/+188
| | | | | | | | | | | This commit introduces the initial U-Boot support for QEMU x86 targets. U-Boot can boot from coreboot as a payload, or directly without coreboot. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Merged in patch 'x86: qemu: Add CMD_NET to qemu-x86_defconfig https://patchwork.ozlabs.org/patch/479745/
* x86: Add a CPU driver for baytrailSimon Glass2015-04-30-0/+206
| | | | | | | | This driver supports multi-core init and sets up the CPU frequencies correctly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Allow CPUs to be set up after relocationSimon Glass2015-04-30-0/+38
| | | | | | | | This permits init of additional CPU cores after relocation and when driver model is ready. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add multi-processor initSimon Glass2015-04-30-2/+717
| | | | | | | | | Most modern x86 CPUs include more than one CPU core. The OS normally requires that these 'Application Processors' (APs) be brought up by the boot loader. Add the required support to U-Boot to init additional APs. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Provide access to the IDTSimon Glass2015-04-29-0/+5
| | | | | | | Add a function to return the address of the Interrupt Descriptor Table. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Store the GDT pointer in global_dataSimon Glass2015-04-29-0/+1
| | | | | | | | | When we start up additional CPUs we want them to use the same Global Descriptor Table. Store the address of this in global_data so we can reference it later. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Disable -WerrorSimon Glass2015-04-29-1/+1
| | | | | | | | | This is annoying during development and serves no useful purpose since warnings are clearly displayed now that we are using Kbuild. Remove this option. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Remove unwanted MMC debuggingSimon Glass2015-04-29-1/+0
| | | | | | | This printf() should not have made it into the code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: quark: Use reset_cpu()Simon Glass2015-04-29-1/+1
| | | | | | | | | Now that reset_cpu() functions correctly, use it instead of directly accessing the port. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ivybridge: Use reset_cpu()Simon Glass2015-04-29-15/+6
| | | | | | | | Now that reset_cpu() functions correctly, use it instead of directly accessing the port. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Implement reset_cpu() correctly for modern CPUsSimon Glass2015-04-29-13/+9
| | | | | | | | | | | | The existing code is pretty ancient and is unreliable on modern hardware. Generally it will hang. We can use port 0xcf9 to initiate reset on more modern hardware (say in the last 10 years). Update the reset_cpu() function to do this, and add a new 'full reset' function to perform a full power cycle. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: link: Add PCH driver to support SPI FlashSimon Glass2015-04-29-0/+11
| | | | | | | | U-Boot on coreboot does not have a driver for the PCH so cannot see the SPI peripheral now that it has moved inside the PCH. Add a simple driver so that SPI flash works again. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: quark: Turn on legacy segments decodeBin Meng2015-04-29-0/+12
| | | | | | | | | By default the legacy segments (A0000h-B0000h, E0000h-F0000h) do not decode to system RAM. Turn on the decode so that we can write configuration tables in the F segment. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: queensbay: Implement PIRQ routingBin Meng2015-04-29-2/+252
| | | | | | | | Implement Intel Queensbay platform-specific PIRQ routing support. The chipset PIRQ routing setup is called in the arch_misc_init(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Write configuration tables in last_stage_init()Bin Meng2015-04-29-0/+10
| | | | | | | | We can write the configuration table in last_stage_init() for all x86 boards, but not with coreboot since coreboot already has them. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Add a function to assign IRQ numbers to PCI deviceBin Meng2015-04-29-0/+21
| | | | | | | | | Add a function to assign an IRQ number to PCI device's interrupt line register in its configuration space, so that the PCI device can have its interrupt working under PIC mode after OS boots up. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: queensbay: Avoid using PCH prefixBin Meng2015-04-29-2/+2
| | | | | | | | | | The prefix PCH was taken from ivybridge port. However Queensbay platform official document does not mention PCH. It is composed of TunnelCreek processor and Topcliff IOH chipset. For accuracy, avoid using PCH prefix in the macro. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* Kconfig: Move CONFIG_BOOTSTAGE to KconfigSimon Glass2015-04-18-1/+1
| | | | | | | Move CONFIG_BOOT_STAGE and its associated options to Kconfig. Adjust existing users and code. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: chromebook_link: dts: Add PCH and LPC devicesSimon Glass2015-04-18-2/+13
| | | | | | | | | | | | The PCH (Platform Controller Hub) is on the PCI bus, so show it as such. The LPC (Low Pin Count) and SPI bus are inside the PCH, so put these in the right place also. Rename the compatible strings to be more descriptive since this board is the only user. Once we are using driver model fully on x86, these will be dropped. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: x86: Add a uclass for a Platform Controller HubSimon Glass2015-04-18-9/+0
| | | | | | | | | Add a simple uclass for this chip which is often found in x86 systems where the CPU is a separate device. The device can have children, so make it scan the device tree for these. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: x86: spi: Convert ICH SPI driver to driver modelSimon Glass2015-04-18-10/+14
| | | | | | | | | | | | Convert this driver over to use driver model. Since all x86 platforms use it, move x86 to use driver model for SPI and SPI flash. Adjust all dependent code and remove the old x86 spi_init() function. Note that this does not make full use of the new PCI uclass as yet. We still scan the bus looking for the device. It should move to finding its details in the device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: x86: pci: Convert chromebook_link to use driver model for pciSimon Glass2015-04-18-65/+57
| | | | | | | | | | | | | | | | Move chromebook_link over to driver model for PCI. This involves: - adding a uclass for platform controller hub - removing most of the existing PCI driver - adjusting how CPU init works to use driver model instead - rename the lpc compatible string (it will be removed later) This does not really take advantage of driver model fully, but it does work. Furture work will improve the code structure to remove many of the explicit calls to init the board. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: x86: pci: Convert coreboot to use driver model for pciSimon Glass2015-04-18-47/+16
| | | | | | Move coreboot-x86 over to driver model for PCI. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: x86: pci: Add a PCI driver for driver modelSimon Glass2015-04-18-0/+40
| | | | | | | Add a simple x86 PCI driver which uses standard functions provided by the architecture. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Split up arch_cpu_init()Simon Glass2015-04-16-0/+8
| | | | | | | | At present we do more in this function than we should. Split out the post-driver-model part into a separate function. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add a x86_ prefix to the x86-specific PCI functionsSimon Glass2015-04-16-175/+179
| | | | | | | | | | | | These functions currently use a generic name, but they are for x86 only. This may introduce confusion and prevents U-Boot from using these names more widely. In fact it should be possible to remove these at some point and use generic functions, but for now, rename them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Support machines with >4GB of RAMSimon Glass2015-04-16-2/+4
| | | | | | | | | | | | | Some systems have more than 4GB of RAM. U-Boot can only place things below 4GB so any memory above that should not be used. Ignore any such memory so that the memory size will not exceed the maximum. This prevents gd->ram_size exceeding 4GB which causes problems for PCI devices which use DMA. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
* x86: quark: Enable on-chip ethernet controllersBin Meng2015-03-24-0/+19
| | | | | | | | | | Intel Quark SoC integrates two 10/100 ethernet controllers which can be connected to an external RMII PHY. The MAC IP is from Designware. Enable this support with the existing U-Boot Designware MAC driver so that the ethernet port on Intel Galileo board can be used. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* arch/x86/cpu/quark/mrc.c: Switch to U_BOOT_DATE / U_BOOT_TIMETom Rini2015-03-24-1/+2
| | | | | | | | | | | Using __DATE__ and __TIME__ results in an error due to -Werror=date-time with gcc-4.9 (__DATE__ / __TIME__ might prevent reproducible builds) so switch these over to U_BOOT_DATE / U_BOOT_TIME Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@ti.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: quark: MRC codes clean upBin Meng2015-03-24-1049/+955
| | | | | | | | | | | | This patch cleans up the quark MRC codes coding style by: - Remove BIT0/1../31 defines from mrc_util.h - Create names for the documented BITs and use them - For undocumented single BITs, use (1 << n) directly - For undocumented ORed BITs, use the hex number directly - Remove redundancy parenthesis all over the codes - Replace to use lower case hex numbers Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* remove unnecessary version.h includesRob Herring2015-03-24-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Various files are needlessly rebuilt every time due to the version and build time changing. As version.h is not actually needed, remove the include. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Stefano Babic <sbabic@denx.de> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Tom Warren <twarren@nvidia.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Macpaul Lin <macpaul@andestech.com> Cc: Wolfgang Denk <wd@denx.de> Cc: York Sun <yorksun@freescale.com> Cc: Stefan Roese <sr@denx.de> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Simon Glass <sjg@chromium.org> Cc: Philippe Reynes <tremyfr@yahoo.fr> Cc: Eric Jarrige <eric.jarrige@armadeus.org> Cc: "David Müller" <d.mueller@elsoft.ch> Cc: Phil Edworthy <phil.edworthy@renesas.com> Cc: Robert Baldyga <r.baldyga@samsung.com> Cc: Torsten Koschorrek <koschorrek@synertronixx.de> Cc: Anatolij Gustschin <agust@denx.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Łukasz Majewski <l.majewski@samsung.com>
* x86: Add SD/MMC support to quark/galileoBin Meng2015-02-06-0/+11
| | | | | | | | Intel Galileo board has a microSD slot which is routed from Quark SoC SDIO controller. Enable SD/MMC support so that we can use an SD card. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Add SPI support to quark/galileoBin Meng2015-02-06-0/+17
| | | | | | | | | | The Quark SoC contains a legacy SPI controller in the legacy bridge which is ICH7 compatible. Like Tunnel Creek and BayTrail, the BIOS control register offset in the ICH SPI driver is wrong for the Quark SoC too, unprotect_spi_flash() is added to enable the flash write. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: quark: Initialize non-standard BARsBin Meng2015-02-06-0/+46
| | | | | | | | | Quark SoC has some non-standard BARs (excluding PCI standard BARs) which need be initialized with suggested values. This includes GPIO, WDT, RCBA, PCIe ECAM and some ACPI register block base addresses. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: quark: Call MRC in dram_init()Bin Meng2015-02-06-2/+97
| | | | | | | | Now that we have added Quark MRC codes, call MRC in dram_init() so that DRAM can be initialized on a Quark based board. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: quark: Enable the Memory Reference Code buildBin Meng2015-02-06-0/+1
| | | | | | | Turn on the Memory Reference code build in the quark Makefile. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: quark: Add System Memory Controller supportBin Meng2015-02-06-0/+3210
| | | | | | | The codes are actually doing the memory initialization stuff. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: quark: Add utility codes needed for MRCBin Meng2015-02-06-0/+2068
| | | | | | | Add various utility codes needed for Quark MRC. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: quark: Add Memory Reference Code (MRC) main routinesBin Meng2015-02-06-0/+204
| | | | | | | Add the main routines for Quark Memory Reference Code (MRC). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-10-18 03:22:59 +0000