summaryrefslogtreecommitdiff
path: root/arch/arm
Commit message (Collapse)AuthorAgeLines
...
* sun5i: Add A10s-Wobo-i5 defconfig and dtsJelle van der Waa2015-09-10-0/+236
| | | | | | | | | | | | | | The Wobo i5 top set box is a somewhat curious A10s based top set box, it uses an AXP209 rather then the AXP152 usually used in combination with the A10s. It has an ethernet phy connected to PORTD rather then PORTA, and its built-in usb wifi is connected via the otg controller. The dts file changes are identical to the changes submitted to the upstream kernel. Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sun5i: Add q8_a13_tablet defconfig and dtsHans de Goede2015-09-10-0/+308
| | | | | | | | | | | | | | | | | | | | | | This commits adds a generic support for q8 formfactor a13 based tablets. These tablets ship in many variants, with the difference mainly being the touchscreen controller / accelerometer / wifi chip used. The wifi is USB based, and thus not listed in devicetree. ATM the kernel does not support the touchscreen / accelerometer on these devices. In the future we may need multiple configs with different CONFIG_DEFAULT_DEVICE_TREE settings, this depends on how we solve the hw differences on the kernel side. For now this will suffice. The dts files are identical to the dts files submitted to the upstream kernel for these tablets. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sun4i: Add dts and defconfig for iNet-1 based tabletsHans de Goede2015-09-10-0/+227
| | | | | | | | | | | | | | | | | The iNet-tek iNet-1 PCB is a PCB found in various generic 10.1" 1024x600 A10 based tablets such as the Point of View Protab2 XXL and the Cherry M1007. This patch has been tested on both rev2 and rev5 of this board / these tablets. These tablets feature the usual connectors: headphone, mini hdmi, power-barrel, mini-usb and a micro-sd slot. The dts is identical to the dts submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sun4i: Add defconfig and dts for inet9f-rev03 based tabletsHans de Goede2015-09-10-0/+220
| | | | | | | | | | | | | | | | The inet9f-rev03 pcb is specially designed for gaming tablets, such as the qware tb-g100 tablet. These 7" tablets feature a dpad, firebuttons and 2 joysticks on the sides of the screen. Besides this they have the usual connectors: power-barrel, mini usb, mini hdmi, headphone and micro-sd slot. The dts is identical to the dts submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sun4i: Add defconfig and dts for the pov protab2-ips9 tabletHans de Goede2015-09-10-1/+211
| | | | | | | | | | | The Point of View protab2-ips9 is a tablet with a 9" ips 1024x768 lcd screen, microsd slot, headphones, mini hdmi, mini usb b and power barrel connectors. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* arm: socfpga: Add support for the Terasic DE-0 Atlas boardDinh Nguyen2015-09-04-0/+69
| | | | | | | Add support for the Terasic DE0-Nano/Atlas-SoC Kit, which is a CycloneV based board. The board can boot from SD/MMC. Ethernet is also supported. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* arm: socfpga: Add support for DENX MCV SoM and MCVEVK boardMarek Vasut2015-09-04-0/+61
| | | | | | | | Add support for DENX MCV SoM, which is CycloneV based and the associated DENX MCVEVK baseboard. The board can boot from eMMC. Ethernet and USB is supported. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: Add support for Terasic SoCkit boardMarek Vasut2015-09-04-0/+100
| | | | | | | | Add support for Terasic SoCkit, which is CycloneV based board. The board can boot either from SD/MMC or QSPI. Ethernet is also supported. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: Do not call board_init_r() from board_init_f()Marek Vasut2015-09-04-2/+0
| | | | | | | | | | | Instead of calling board_init_r() directly from board_init_f(), just return from board_init_f(). This will make the code continue executing in crt0.S _main(), from which the board_init_r() is called. This patch aligns the SoCFPGA SPL with the correct SPL design as well as reduces the stack utilisation slightly. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
* arm: socfpga: Always enable OF_CONTROL and SPL_OF_CONTROLMarek Vasut2015-09-04-0/+2
| | | | | | | The SoCFPGA probes mostly from OF and the OF is mandatory both in U-Boot itself and U-Boot SPL. Enable it by default. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: Assure ISWGRP 0 and 1 are initedMarek Vasut2015-09-04-1/+7
| | | | | | | | | | This fix makes sure that the ISWGRP0 and ISWGRP1 registers are correctly inited. In case those registers are not initialized, it is not possible to access the registers synthesised in the FPGA through the bridges. Any such access produces data abort. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
* mmc: dw_mmc: Probe the MMC from OFMarek Vasut2015-09-04-9/+2
| | | | | | | | | | | | | Rework the driver to probe the MMC controller from Device Tree and make it mandatory. There is no longer support for probing from the ancient qts-generated header files. This patch now also removes previous temporary workaround. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com>
* Merge git://git.denx.de/u-boot-rockchipTom Rini2015-09-03-6/+6636
|\
| * arm: Turn of d-cache before i-cacheSjoerd Simons2015-09-02-6/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Booting the kernel fails on RK3288 (and probably other rockchip SoCs) when the i-cache is disabled/flushed before d-cache. I have not investigated whether this is due to U-Boot hanging or whether it's very early in the linux boot, but following the approach of the various rockchip U-Boot forks (first disable d-cache then i-cache) makes things work. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: Disable sdio mmc slot on rk3288-fireflySjoerd Simons2015-09-02-1/+1
| | | | | | | | | | | | | | | | | | U-Boot can't use the sdio card so turn it of to prevent things getting confused/struck when trying to use the card as storage. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: Add basic support for jerrySimon Glass2015-09-02-1/+1275
| | | | | | | | | | | | This builds and displays an SPL message, but does not function beyond that. Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: Add basic support for firefly-rk3288Simon Glass2015-09-02-0/+544
| | | | | | | | | | | | | | | | | | | | | | The Firefly RK3288 is a suitable target board for initial mainline Rockchip support. It includes a good set of peripherals, a recent SoC and it is readily available. This adds only some basic files required to allow the baord to display a serial message in SPL and hang. Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: Add SPI driverSimon Glass2015-09-02-0/+20
| | | | | | | | | | | | | | Add a SPI driver for the Rockchip RK3288, using driver model. It should work for other Rockchip SoCs also. Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: Add I2C driverSimon Glass2015-09-02-0/+70
| | | | | | | | | | | | | | Add an I2C driver for the Rockchip RK3288, using driver model. It should work for other Rockchip SoCs also. Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: Add core SoC start-up codeSimon Glass2015-09-02-0/+432
| | | | | | | | | | | | | | Add code for starting up U-Boot SPL and U-Boot proper. This is generic and makes use of devices provided by the board- or SoC-specific code. Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: rk3288: Add SDRAM initSimon Glass2015-09-02-0/+1455
| | | | | | | | | | | | | | | | | | Add code to set up the SDRAM in SPL, ready for loading U-Boot. This uses device tree for configuration so should be able to support other RAM configurations. It may be possible to generalise the code to support other SoCs at some point. Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: rk3288: Add a simple syscon driverSimon Glass2015-09-02-0/+26
| | | | | | | | | | | | Add a driver that provides access to system controllers. Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: rk3288: Add SoC reset driverSimon Glass2015-09-02-0/+54
| | | | | | | | | | | | | | We can reset the SoC using some CRU (clock/reset unit) registers. Add support for this. Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: rk3288: Add header files for PMU and GRFSimon Glass2015-09-02-0/+857
| | | | | | | | | | | | | | PMU is the power management unit and GRF is the general register file. Both are heavily used in U-Boot. Add header files with register definitions. Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: rk3288: Add clock driverSimon Glass2015-09-02-0/+185
| | | | | | | | | | | | | | Add a driver for setting up and modifying the various PLLs and peripheral clocks on the RK3288. Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: Add basic peripheral and clock definitionsSimon Glass2015-09-02-0/+119
| | | | | | | | | | | | | | | | Add header files for the peripherals and clocks supported on Rockchip platforms. The particular implementation (and register set) for each is SoC-specific, but it seems that the naming can be generic. Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: gpio: Add rockchip GPIO driverSimon Glass2015-09-02-0/+28
| | | | | | | | | | | | | | This supports RK3288 at present. It does not implement functions or support for pull up/down. Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: rk3288: dts: Make core devices available earlySimon Glass2015-09-02-0/+15
| | | | | | | | | | | | | | In SPL we need access to the CRU and other peripherals so we can set up SDRAM. Mark these so that they will remain in the device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: Bring in RK3288 device tree file includes and bindingsSimon Glass2015-09-02-0/+1546
| | | | | | | | | | | | | | | | Bring in required device tree files from Linux. Since mainline Linux is somewhat behind, use the files from the Chromium tree. We can re-sync once further code is acccepted upstream. Signed-off-by: Simon Glass <sjg@chromium.org>
| * arm: reset: Avoid a build error when the reset uclass is enabledSimon Glass2015-09-02-0/+2
| | | | | | | | | | | | | | There can be only one do_reset(). When CONFIG_RESET is enabled this is provided by the reset uclass, and ARM's version should be disabled. Signed-off-by: Simon Glass <sjg@chromium.org>
* | arch/arm/Kconfig: Add back in missing entries.Tom Rini2015-09-02-0/+2
| | | | | | | | | | | | | | In 2178282 we accidentally dropped out hilsilicon and cm_t43. Bring these back in. Signed-off-by: Tom Rini <trini@konsulko.com>
* | Convert omap3_logic to ti_omap3_common.hAdam Ford2015-09-02-0/+3
| | | | | | | | | | | | | | Convert to using the common config files. Signed-off-by: Adam Ford <adam.ford@logicpd.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-09-02-277/+2228
|\ \
| * | imx: vf610 add get_cpu_revPeng Fan2015-09-02-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since we need to support runtime check for different drivers, we need to add get_cpu_rev for vf610, otherwise there will be build errors. This patch introduces a dummy CPU id which is not read from chip silicon. Later when we can get the real id from chip, can fix the value of MXC_CPU_VF610 then. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Suggested-by: Stefano Babic <sbabic@denx.de> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
| * | mxc: ocotp fix hole in shadow registersPeng Fan2015-09-02-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a hole in shadow registers address map of size 0x100 between bank 5 and bank 6 on iMX6QP, iMX6DQ, iMX6SDL, iMX6SX and iMX6UL. Bank 5 ends at 0x6F0 and Bank 6 starts at 0x800. When reading the fuses, we should account for this hole in address space. Similar hole exists between bank 14 and bank 15 of size 0x80 on iMX6QP, iMX6DQ, iMX6SDL and iMX6SX. Note: iMX6SL has only 0-7 banks and there is no hole. Note: iMX6UL doesn't have this one. When reading, we use register offset, so need to account for holes to get the correct address. When writing, we use bank/word index, there is no need to account for holes, always use bank/word index from fuse map. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
| * | arm, imx6: add aristainetos 2b board versionHeiko Schocher2015-09-02-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | there is a 2b board version of the aristainetos2 board. Differences to the v2: - spi cs for the nor flash and display controller changed - some pinmux changes - LED gpio settings changed Signed-off-by: Heiko Schocher <hs@denx.de>
| * | imx: mx6ul_14x14_evk select MX6ULPeng Fan2015-09-02-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no need to expose SoC choice to user, we already got the SoC according to the build target. So default "select MX6UL" for MX6UL_14x14_EVK target. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
| * | arm: Add SYS_L2CACHE_OFF Kconfig entryPeng Fan2015-09-02-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To i.MX6UL, SYS_L2CACHE_OFF is selected, but there is no Kconfig entry for SYS_L2CACHE_OFF. Then "select SYS_L2CACHE_OFF" does not effect for i.MX6UL, which is not expected. Since SYS_L2CACHE_OFF is mainly used by ARM architecture, add it to arch/arm/Kconfig. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@konsulko.com> Cc: Stefano Babic <sbabic@denx.de>
| * | imx: mx6slevk: add SPL supportPeng Fan2015-09-02-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add SPL boot support for mx6slevk board. 1. Introduce a configuration file mx6slevk_spl_defconfig. 2. i.MX6SL has same DRAM space with i.MX6SX, need to change SPL DRAM SPACE. 3. Include imx6_spl.h and related SPL macro in mx6slevk.h. 4. select SUPPORT_SPL for TARGET_MX6SLEVK. 5. Add SPL board code to do related initialization. Boot Log: U-Boot SPL 2015.07-00544-g1594a76 (Aug 17 2015 - 01:56:59) reading u-boot.img reading u-boot.img U-Boot 2015.07-00544-g1594a76 (Aug 17 2015 - 01:56:59 +0000) CPU: Freescale i.MX6SL rev1.2 996 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C) at 50C Reset cause: POR Board: MX6SLEVK I2C: ready DRAM: 1 GiB PMIC: PFUZE100 ID=0x10 MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: FEC [PRIME] Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
| * | imx: mx6: ddr: add LPDDR2 supportPeng Fan2015-09-02-4/+311
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add LPDDR2 support: 1. Implement a function mx6_lpddr2_cfg to initialize MMDC for LPDDR2. 2. Introduce a structure mx6_lpddr2_cfg, most entrys are same to mx6_ddr3_cfg, but still keep it a single one for easy to choose parameters for LPDDR2. 3. If ddr_type is LPDDR2, use mx6_lpddr2_cfg to init MMDC. 4. Update comments. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Tim Harvey <tharvey@gateworks.com>
| * | imx: mx6: ddr init MMDC according to ddr_typePeng Fan2015-09-02-2/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To i.MX6, DDR3 and LPDDR2 is supported, so rename function mx6_dram_cfg to mx6_ddr3_cfg and the original mx6_dram_cfg function only is a wrapper. The new reimplemented function mx6_dram_cfg only invokes mx6_ddr3_cfg when ddr_type is for DDR3. Later we can use ddr_type to initialize MMDC for LPDDR2. Initialize ddr_type for different boards which enable SPL. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Stefan Roese <sr@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Stefan Roese <sr@denx.de>
| * | imx: mx6: ddr add an entry ddr_type for mx6_ddr_sysinfoPeng Fan2015-09-02-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add ddr_type entry for mx6_ddr_sysinfo. It will be used for differenrate DDR3 and LPDDR2. Introduce an enum type for ddr_type. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Tim Harvey <tharvey@gateworks.com>
| * | imx: mx6: ddr add mpzqlp2ctl entryPeng Fan2015-09-02-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add mpzqlp2ctl entry for mx6_mmdc_calibration. MMDC_MPZQLP2CTL register is for init tZQINIT, tZQCL, tZQCS for LPDDR2 chips. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Tim Harvey <tharvey@gateworks.com>
| * | imx: mx6: ddr add dram io configuration and header file for i.MX6SLPeng Fan2015-09-02-0/+150
| | | | | | | | | | | | | | | | | | | | | | | | | | | Define two structure mx6sl_iomux_ddr_regs and mx6sl_iomux_grp_regs. Add a new function mx6sl_dram_iocfg to configure dram io. Add header file to define macros for register address. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
| * | imx: mx6: ddr correct tRFC and tXSPeng Fan2015-09-02-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To Chip density 4Gb, tRFC should be 300ns, see "Table 61 — Refresh parameters by device density" of JESD79-3E. tXS(min) is max(5nCK, tRFC(min) + 10ns). Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
| * | imx: mx6: ddr no support MMDC1 for i.MX6SLPeng Fan2015-09-02-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | i.MX 6SoloLite only supports MMDC0, so do not access MMDC1 for i.MX 6SL. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
| * | imx: mx6: ddr add more register entry for mmdc_p_regsPeng Fan2015-09-02-9/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add more register entry for MMDC structure. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
| * | tbs2910: use full name in Kconfig board selectionSoeren Moch2015-09-02-1/+1
| | | | | | | | | | | | Signed-off-by: Soeren Moch <smoch@web.de>
| * | imx: mxc_gpio: add support for imx7d SoCAdrian Alonso2015-09-02-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | * Add mxc_gpio support for imx7d SoC * Use CONFIG_MX7 to extend mxc gpio driver support for imx7d Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Adrian Alonso <aalonso@freescale.com>
| * | imx: iomux-v3: add imx7d support for iomuxcAdrian Alonso2015-09-02-0/+1377
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Add imx7d support for iomux controller * imx7d has two iomux controllers iomuxc (0x3033000) and iomuxc-lpsr (0x302C0000) each conroller provides control and mux mode pad registers but shares iomuxc input select register with iomuxc-lpsr IOMUX_CONFIG_LPSR flag is used to properly set daisy chain settings for iomuxc-lpsr pads. * Since mx7d introduces LPSR IOMUX pins, add new base to IOMUX v3 driver for these LPSR pins. Signed-off-by: Adrian Alonso <aalonso@freescale.com> Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com>
generated by cgit v1.1 at 2024-11-09 19:13:18 +0000