summaryrefslogtreecommitdiff
path: root/arch/arm
Commit message (Collapse)AuthorAgeLines
...
* | T210: P2571: Turn CPU fan onTom Warren2015-08-05-0/+3
|/ | | | | | | | CPU board (E2530) has a fan - turn it on via GPIO to keep the SoC cool. Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* sunxi: Drop our own copy of the USB_KEYBOARD optionsHans de Goede2015-08-05-0/+1
| | | | | | | USB_KEYBOARD is now defined in drivers/usb/Kconfig, drop our own duplicate definition. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* usb: musb-new: CONFIG_MUSB prefix replacement with CONFIG_USB_MUSBPaul Kocialkowski2015-08-05-2/+2
| | | | | | | | | USB-related options are usually prefixed with CONFIG_USB and platform-specific adaptation for the MUSB controller already have a CONFIG_USB_MUSB prefix, so this switches all MUSB-related options to a CONFIG_USB_MUSB prefix, for consistency. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* armv8/lsch3/config: Define USB XHCI controller base address for LS2085ANikhil Badola2015-08-03-0/+3
| | | | | | | | Define base address of both usb xhci controllers in lsch3 config in the format (IMMR + offset) for LS2085A Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* armv8/lsch3/config: Define CONFIG_SYS_CACHELINE_SIZE for LS2085ANikhil Badola2015-08-03-0/+1
| | | | | | | | Define CONFIG_SYS_CACHELINE_SIZE for LS2085A which is required by USB XHCI stack for alignment Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* armv7/ls102xa: Fix non-boot cpus cannot correctly fall in spin tableWang Dongsheng2015-08-03-0/+8
| | | | | | | | | | | Bootrom will put cpus into WFE state when boot cpu release cpus, so target cpu cannot correctly go to spin state. Add 'sev' to wakeup non-boot cpu that hold on bootrom space, let target cpu can fall into u-boot spin table. Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-08-02-218/+1776
|\
| * imx: mx6ul_14x14_evk add basic board supportPeng Fan2015-08-02-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Add USDHC, I2C, UART, 74LV, USB, QSPI support. 2. Support SPL 3. CONFIG_MX6UL_14X14_EVK_EMMC_REWORK is introduced, this board default supports sd for usdhc2, but can do hardware rework to make usdhc2 support emmc. Boot Log: U-Boot SPL 2015.07-rc3-00124-g35d727b (Jul 20 2015 - 18:40:59) reading u-boot.img reading u-boot.img U-Boot 2015.07-rc3-00124-g35d727b (Jul 20 2015 - 18:40:59 +0800) CPU: Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C)CPU: Thermal invalid data, fuse: 0x0 - invalid sensor device Reset cause: POR Board: MX6UL 14x14 EVK I2C: ready DRAM: 512 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
| * imx:mx6ul add dram spl configuration and header filePeng Fan2015-08-02-10/+141
| | | | | | | | | | | | | | | | | | | | | | | | 1. Define two structures mx6ul_iomux_ddr_regs and mx6ul_iomux_grp_regs. 2. Add a new function mx6ul_dram_iocfg to configure dram io. 3. Refactor MMDC1 macro, discard "#ifdef CONFIG_MX6SX". Since only mmdc0 channel exists on i.MX6SX/UL, redefine MMDC1 macro support runtime check, but not hardcoding #ifdef macros. 4. Introduce mx6ul-ddr.h, which includes the register address for DRAM IO configuration. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
| * imx: mx6 add PAD_CTL_SPEED_LOW for i.MX6SX/ULPeng Fan2015-08-02-0/+4
| | | | | | | | | | | | | | PAD_CTL_SPEED_LOW for i.MX6SX/UL is (0 << 6) Signed-off-by: Ye.Li <B37916@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
| * imx: mx6ul update soc related settingsPeng Fan2015-08-02-5/+4
| | | | | | | | | | | | | | | | 1.Update WDOG settings. 2.No need to gate/ungate all PFDs for i.MX6UL. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com>
| * imx: mx6ul select SYS_L2CACHE_OFFPeng Fan2015-08-02-0/+4
| | | | | | | | | | | | | | | | | | i.MX6UL features an Cortex-A7 core, it does not have PL310 as other i.MX6 chips. To Cortex-A7 core, If D-Cache is enabled, L2 Cache is enabled. There is on specific switch for on/off L2 Cache, so default select SYS_L2CACHE_OFF. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
| * imx:mx6ul add clock supportPeng Fan2015-08-02-90/+159
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Add enet, uart, i2c, ipg clock support for i.MX6UL. 2. Correct get_periph_clk, it should account for MXC_CCM_CBCDR_PERIPH_CLK2_PODF_MASK. 3. Refactor get_mmdc_ch0_clk to make all i.MX6 share one function, but not use 'ifdef'. 4. Use CONFIG_FSL_QSPI for enable_qspi_clk, but not #ifdef CONFIG_MX6SX. 5. Use CONFIG_PCIE_IMX for pcie clock settings, use CONFIG_CMD_SATA for sata clock settings. In this way, we not need "#if defined(CONFIG_MX6Q) || defined....", only need one CONFIG_PCIE_IMX in header file. Signed-off-by: Ye.Li <B37916@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
| * imx-common: timer: add i.MX6UL supportPeng Fan2015-08-02-3/+5
| | | | | | | | | | | | Add i.MX6UL GPT timer support. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
| * imx: mx6ul Add CONFIG_SYS_CACHELINE_SIZE for i.MX6ULPeng Fan2015-08-02-0/+4
| | | | | | | | | | | | | | Since i.MX6UL's cache line size is 64bytes, need to define the macro CONFIG_SYS_CACHELINE_SIZE to 64 for i.MX6UL. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
| * imx: mx6ul: Update imx registers head filePeng Fan2015-08-02-25/+35
| | | | | | | | | | | | | | | | | | | | | | | | 1. Update imx register base address for i.MX6UL. 2. Remove duplicated MXS_APBH/GPMI/BCH_BASE. 3. Remove #ifdef for register addresses that equal to "AIPS2_OFF_BASE_ADDR + 0x34000" for different chips. 4. According fuse map, complete fuse_bank4_regs. 5. Move AIPS3_ARB_BASE_ADDR and AIPS3_ARB_END_ADDR out of #ifdef CONFIG_MX6SX, because we can use runtime check Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
| * imx: mx6ul: Add pins IOMUX head filePeng Fan2015-08-02-0/+1067
| | | | | | | | | | | | | | Add i.MX6UL pins IOMUX file which defines the IOMUX settings for choose. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com>
| * imx: mx6ul: Add i.MX6UL CPU typePeng Fan2015-08-02-1/+4
| | | | | | | | | | | | | | | | | | | | Add MXC_CPU_MX6UL for i.MX6UL CPU type which is got at runtime from DIGPROG register. But the value has been occupied by MXC_CPU_MX6D which is not real id from DIGPROG register, so change i.MX6D to value 0x67 which was not occupied. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com>
| * arm: mx6: kconfig: don't select CPU_V7 per boardNikita Kiryanov2015-08-02-3/+0
| | | | | | | | | | | | | | | | | | | | CPU_V7 is already selected by ARCH_MX6, so no point in selecting it again by boards that depend on ARCH_MX6. Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
| * arm: mx6: cm-fx6: move cm-fx6 target under ARCH_MX6Nikita Kiryanov2015-08-02-8/+8
| | | | | | | | | | | | | | | | | | | | cm-fx6 is an MX6 based board, and the menuconfig hierarchy should reflect that. Make TARGET_CM_FX6 dependant on ARCH_MX6. Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
| * imx: mx6qp Enable PRG clock for IPUPeng Fan2015-08-02-0/+5
| | | | | | | | | | | | | | | | | | | | The i.MX6DQP has a PRG module, need to enable its clock for using IPU. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Brown Oliver <B37094@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
| * imx: mx6: hab : Remove the cache issue workaroud in hab for i.MX6QPYe.Li2015-08-02-1/+2
| | | | | | | | | | | | | | | | | | Since the i.MX6QP has fixed the issue in boot ROM, so remove the workaround for i.MX6QP. Signed-off-by: Ye.Li <B37916@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
| * imx: mx6: ccm: Change the clock settings for i.MX6QPPeng Fan2015-08-02-34/+49
| | | | | | | | | | | | | | | | | | | | | | | | Since i.MX6QP changes some CCM registers, so modify the clocks settings to follow the hardware changes. In c files, use runtime check and discard #ifdef. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
| * imx: add cpu type for i.MX6QP/DPPeng Fan2015-08-02-5/+16
| | | | | | | | | | | | | | | | | | | | | | Add cpu type for i.MX6QP/DP. This patch also fix is_mx6dqp(), since get_cpu_rev can return MXC_CPU_MX6QP and MXC_CPU_MX6DP, we should use: (is_cpu_type(MXC_CPU_MX6QP) || is_cpu_type(MXC_CPU_MX6DP)). Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
| * Merge branch 'master' of git://git.denx.de/u-bootStefano Babic2015-07-17-1/+149
| |\
| * | i2c: fix vf610 supportAlbert ARIBAUD \(3ADEV\)2015-07-10-4/+15
| | | | | | | | | | | | | | | | | | | | | Add support in mxc_i2c driver, iomux_v3 and vf610 architecture for the four I2C instances available in VF610. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
| * | iMX: adding parsing to hab_status commandUlises Cardenas2015-07-10-13/+245
| | | | | | | | | | | | | | | | | | | | | | | | hab_status command returns a memory dump of the hab event log. But the raw data is not human-readable. Parsing such data into readable event will help to minimize debbuging time. Signed-off-by: Ulises Cardenas <Ulises.Cardenas@freescale.com>
| * | imx: mx6 add i2c4 clock support for i.MX6SXPeng Fan2015-07-10-7/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add I2C4 clock support for i.MX6SX. Since we use runtime check, but not macro, we need to remove `#ifdef ..` in crm_regs.h, or gcc will fail to compile the code succesfully. Making the macros only for i.MX6SX open to other i.MX6x maybe not a good choice, but we have runtime check. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
| * | imx: mx6 remove duplicated enable_cspi_clockPeng Fan2015-07-10-20/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | enable_spi_clock does the same thing with enable_cspi_clock, so remove enable_cspi_clock. Remove enable_cspi_clock prototype in header file convert cm_fx6/spl.c to use enable_spi_clk Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
* | | armv8: caches: Added routine to set non cacheable regionSiva Durga Prasad Paladugu2015-07-31-10/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added routine mmu_set_region_dcache_behaviour() to set a particular region as non cacheable. Define dummy routine for mmu_set_region_dcache_behaviour() to handle incase of dcache off. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini2015-07-29-64/+3567
|\ \ \
| * | | T210: Add support for 64-bit T210-based P2571 boardTom Warren2015-07-28-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on Venice2, incorporates Stephen Warren's latest P2571 pinmux table. With Thierry Reding's 64-bit build fixes, this will build and and boot in 64-bit on my P2571 (when used with a 32-bit AVP loader). Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | | P2571: dts: Add DT file for Tegra210 P2571 boardTom Warren2015-07-28-1/+108
| | | | | | | | | | | | | | | | | | | | | | | | Based on T124 Venice2. SDMMC1 is SD-card slot. Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | | ARM: Tegra210: Add support to common Tegra source/config filesTom Warren2015-07-28-39/+453
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Derived from Tegra124, modified as appropriate during T210 board bringup. Cleaned up debug statements to conserve string space, too. This also adds misc 64-bit changes from Thierry Reding/Stephen Warren. Signed-off-by: Tom Warren <twarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
| * | | ARM: Tegra210: Add SoC code/include files for T210Tom Warren2015-07-28-0/+2933
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All based off of Tegra124. As a Tegra210 board is brought up, these may change a bit to match the HW more closely, but probably 90% of this is identical to T124. Note that since T210 is a 64-bit build, it has no SPL component, and hence no cpu.c for Tegra210. Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | | Tegra: Rework KConfig options to allow 64-bit builds (T210)Tom Warren2015-07-28-11/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Moved Tegra config options to mach-tegra/Kconfig so that both 32-bit and 64-bit builds can co-exist for Tegra SoCs. T210 will be 64-bit only (no SPL) and will require a 32-bit AVP/BPMP loader. Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | | Tegra210: Fix 64-bit build warning about save_boot_params_ret()Tom Warren2015-07-28-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Simon's 'tegra124: Implement spl_was_boot_source()' needs a prototype for save_boot_params_ret() to build cleanly for 64-bit Tegra210. Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | | ARM: tegra: Initialize timer earlierThierry Reding2015-07-28-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A subsequent patch will enable the use of the architected timer on ARMv8. Doing so implies that udelay() will be backed by this timer implementation, and hence the architected timer must be ready when udelay() is first called. The first time udelay() is used is while resetting the debug UART, which happens very early. Make sure that arch_timer_init() is called before that. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | | ARM: tegra: Use standard cache enable for 64-bitThierry Reding2015-07-28-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On 64-bit SoCs the I-cache isn't enabled in early code, so the default cache enable functions for 64-bit ARM can be used. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
| * | | ARM: tegra: Restrict usable RAM to 32-bit on 64-bit SoCsThierry Reding2015-07-28-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most peripherals on Tegra can do DMA only to the lower 32-bit address space, even on 64-bit SoCs. This limitation is typically overcome by the use of an IOMMU. Since the IOMMU is not entirely trivial to set up and serves no other purpose (I/O protection, ...) in U-Boot, restrict 64-bit Tegra SoCs to the lower 32-bit address space for RAM. This ensures that the physical addresses of buffers that are programmed into the various DMA engines are valid and don't alias to lower addresses. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
| * | | armv8/cache: Fix page table creationThierry Reding2015-07-28-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While generating the page tables, a running integer index is shifted by SECTION_SHIFT (29) and causes overflow for any integer bigger than 7. The page tables therefore alias to the same 8 sections and cause U-Boot to hang once the MMU is enabled. Fix this by making the index a 64-bit unsigned integer and so avoid the overflow. swarren notes: currently "i" ranges from 0..8191 on all ARM64 boards, and "j" varies depending on RAM size; from 4 to 11 for a board with 4GB at physical address 2GB, as some Tegra boards have. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * | | arm64: Handle arbitrary CONFIG_SYS_MALLOC_F_LEN valuesThierry Reding2015-07-27-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The encoding of the sub instruction used to handle CONFIG_SYS_MALLOC_F_LEN can only accept certain values, and the set of acceptable values differs between the AArch32 and AArch64 instructions sets. The default value of CONFIG_SYS_MALLOC_F_LEN works with either ISA. Tegra uses a non-default value that can only be encoded in the AArch32 ISA. Fix the AArch64 crt0 assembly so it can handle completely arbitrary values. Signed-off-by: Thierry Reding <treding@nvidia.com> [twarren: trimmed Thierry's patch to remove changes already present] Signed-off-by: Tom Warren <twarren@nvidia.com> [swarren, cleaned up patch, wrote description, re-wrote subject] Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * | | ARM: tegra: Build warning fixes for 64-bitThierry Reding2015-07-27-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> [swarren, stripped out changes not strictly related to warnings] Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * | | tegra124: Implement spl_was_boot_source()Simon Glass2015-07-27-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add an implementation of this function for Tegra. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | | | Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblazeTom Rini2015-07-28-62/+1238
|\ \ \ \
| * | | | ARM: zynqmp: Wire up SATA for the boardMichal Simek2015-07-28-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable SATA for the ZynqMP targets. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | | ARM: zynqmp: Wire up ethernet controllersMichal Simek2015-07-28-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Wire up ethernet controllers and enable MII and BOOTP options. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | | ARM: zynq: Add support for zc770-xm011Michal Simek2015-07-28-0/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add xm011 DTS file and related configs and configurations. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | | ARM: zynq: DT: Update zc770 dtsesMichal Simek2015-07-28-12/+176
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Platform DTSes are missing content needed for platform to be able to use OF binding and DM. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | | ARM: zynq: DT: Add zc702 pushbuttons to DT as gpio-keysMichal Simek2015-07-28-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds the two MIO connected pushbuttons on the zc702 board to the devicetree as a single multi-key device for us with the gpio-keys driver. Signed-off-by: Ezra Savard <ezra.savard@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
generated by cgit v1.1 at 2024-11-11 23:06:01 +0000