summaryrefslogtreecommitdiff
path: root/arch/arm/include
Commit message (Collapse)AuthorAgeLines
* Merge git://git.denx.de/u-boot-marvellTom Rini2015-02-06-0/+20
|\
| * arm: armada-xp: Add SPL support used to include the DDR training codeStefan Roese2015-02-06-0/+13
| | | | | | | | | | | | | | | | | | | | This patch adds SPL support to the Marvell Armada-XP. With this addition the bin_hdr integration is not needed any more. The SPL will first initialize the serdes/PHY and the call the DDR setup and training code now integrated into mainline U-Boot. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
| * arm: maxbcm: Enable SPL to include DDR training code into U-BootStefan Roese2015-02-06-0/+3
| | | | | | | | | | | | | | | | | | This patch adds SPL support to the maxbcm MV78460 based board. Including the fixed DDR configuratrion needed for the DDR training code. And the the serdes PHY init code. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
| * arm: armada-xp: Change built target to include the SPL binary as bin_hdrStefan Roese2015-02-06-0/+4
| | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
* | ARM: UniPhier: refactor pinmon commandMasahiro Yamada2015-02-07-1/+1
| | | | | | | | | | | | | | | | | | | | The return value of get_boot_mode_sel() is used as the index of the boot_device_table[] array. Its type should be "int" rather than "u32". Use only the iterator "i" for the loop in do_pinmon(). Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | ARM: UniPhier: remove dummy gpio.hMasahiro Yamada2015-02-07-6/+0
|/ | | | | | | | | | This dummy header was introduced by commit 630bf80ebb34 (ARM: UniPhier: add dummy gpio.h to enable CONFIG_OF_CONTROL). Thanks to commit a08d643dbd85 (dm: Drop gpio.h header from fdtdec.c), such an ugly workaround is no longer needed. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* Merge branch 'master' of git://git.denx.de/u-boot-tiTom Rini2015-02-02-5/+111
|\
| * omap3: add some MUX definitions for upcoming cairoAlbert ARIBAUD \(3ADEV\)2015-01-29-2/+49
| | | | | | | | Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
| * omap3: mmc: add 1.8v bias setting for MMC1Albert ARIBAUD \(3ADEV\)2015-01-29-0/+1
| | | | | | | | Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
| * omap3: add SDRC settings for Samsung K4X51163PGAlbert ARIBAUD \(3ADEV\)2015-01-29-0/+43
| | | | | | | | Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
| * omap3: make SDRC SHARING setting configurableAlbert ARIBAUD \(3ADEV\)2015-01-29-0/+1
| | | | | | | | Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
| * ARM: OMAP5: DRA7xx: Add support for power rail groupingLubomir Popov2015-01-29-3/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On the DRA72x (J6Eco) EVM one PMIC SMPS is powering three SoC core rails. This concept of using one SMPS to supply multiple core domains (in various, although limited combinations, per primary device use case) has now become common and is used by many customer J6/J6Eco designs; it is supported by a number of corresponding PMIC OTP versions. This patch implements correct operation of the core voltages scaling routine by ensuring that each SMPS that is supplying more than one domain shall be written only once, and with the highest voltage of those fused in the SoC (or of those defined in the corresponding header if fuse read is disabled or fails) for the power rails belonging to the group. The patch also replaces some PMIC-related magic numbers with the appropriate definitions. The default OPP_NOM voltages for the DRA7xx SoCs are updated as well, per the latest DMs. Signed-off-by: Lubomir Popov <l-popov@ti.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini2015-02-02-4/+18
|\ \
| * | sunxi: rsb: Move rsb_set_device_mode() call to rsb_init()Hans de Goede2015-02-02-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | It turns out that the device_mode_data is rsb specific, rather then slave specific, so integrate the rsb_set_device_mode() call into rsb_init(). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | sunxi: rsb: Add sun9i (A80 support)Hans de Goede2015-02-02-2/+12
| | | | | | | | | | | | | | | | | | | | | Add support for the A80 to the rsb code. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | sunxi: Add a GMAC Transmit Clock Delay Chain Kconfig optionHans de Goede2015-02-02-0/+4
| |/ | | | | | | | | | | | | | | And use this to set the GMAC Transmit Clock Delay Chain value on Banana boards, rather then keying of CONFIG_TARGET_FOO. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | exynos5: pinmux: check flag for i2c configPrzemyslaw Marczak2015-01-29-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | Some versions of Exynos5 supports High-Speed I2C, on few interfaces, this change allows support this. The new flag is: PINMUX_FLAG_HS_MODE Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Simon Glass <sjg@chromium.org> Cc: Akshay Saraswat <akshay.s@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
* | dm: mmc: Remove use of fdtdec GPIO supportSimon Glass2015-01-29-3/+4
| | | | | | | | | | | | These functions are going away, so use the new uclass support instead. Signed-off-by: Simon Glass <sjg@chromium.org>
* | dm: zynq: Remove inline gpio functionsSimon Glass2015-01-29-15/+0
| | | | | | | | | | | | | | These functions serve no useful purpose, and conflict with the generic API. Drop them. Signed-off-by: Simon Glass <sjg@chromium.org>
* | dm: tegra: video: Remove use of fdtdec GPIO supportSimon Glass2015-01-29-4/+5
|/ | | | | | These functions are going away, so use the new uclass support instead. Signed-off-by: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of git://git.denx.de/u-boot-atmelTom Rini2015-01-26-1/+1
|\
| * ARM: atmel: sama5d4: add usb platform dataBo Shen2015-01-19-1/+1
| | | | | | | | | | | | The SAMA5D4 has the same usb platform data with SAMA5D3 SoC. Signed-off-by: Bo Shen <voice.shen@atmel.com>
* | Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblazeTom Rini2015-01-26-0/+5
|\ \
| * | ARM: zynq: List qspi, smc and nand baseaddressesMichal Simek2015-01-26-0/+3
| | | | | | | | | | | | | | | | | | Add missing addresses to the list. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | ARM: zynq: List nand, qspi and jtag boot modesMichal Simek2015-01-26-0/+2
| | | | | | | | | | | | | | | | | | Use full boot mode list in SPL. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | | ls102xa: fdt: Disable QSPI and DSPI in NOR/NAND/SD bootAlison Wang2015-01-23-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As QSPI/DSPI and IFC are pin multiplexed, QSPI and DSPI are only enabled in QSPI boot, and disabled in other boot modes. IFC is enabled in NOR/NAND/SD boot, and disabled in QSPI boot. This patch will add fdt support for the above rules. Signed-off-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | | arm: ls102xa: Update snoop settings for CCI-400Alison Wang2015-01-23-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CAAM is connected to CCI-400 S0 slave interface. Disable snooping for S0 will cause CAAM self test failure. This patch is to enable snooping for S0 slave interface. These CCI-400 operations are moved to board_early_init_f() to be initialized earlier. For S4 slave interface, issuing of snoop requests and DVM message requests are enabled. Signed-off-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | | arm: ls102xa: Add dummy gpio.h to enable CONFIG_OF_CONTROLRuchika Gupta2015-01-23-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If CONFIG_OF_CONTROL is enabled, lib/fdtdec.c is compiled. It includes <asm/gpio.h> and then <asm/gpio.h> includes <asm/arch/gpio.h>. As a result, all the SoCs that enable CONFIG_OF_CONTROL must have <asm/arch/gpio.h> even if they do not support GPIO. The right fix would be to split the lib/fdtdec.c to remove dependency on GPIO.This commit adds a dummy <asm/arch/gpio.h> to support OF_CONTROL for LS102x platform. This dummy header will be removed after FDT-GPIO stuff is fixed correctly. Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | | ls102xa: etsec: Select ge0_clk125 for eTSEC clock muxing as defaultAlison Wang2015-01-23-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch reverts to use ge0_clk125 for eTSEC clock muxing. For SAI and CAN which are pin multiplexed with RGMII1 in EC1 of RCW, ge2_clk125 will be used via hwconfig. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com> Signed-off-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | | arm/ls1021a: Add workaround for DDR erratum A008378York Sun2015-01-23-0/+1
| | | | | | | | | | | | | | | | | | | | | Internal memory controller counters can reach a bad state after training in DDR4 mode if accumulated ECC or DBI mode is eanbled. Signed-off-by: York Sun <yorksun@freescale.com>
* | | Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini2015-01-23-153/+550
|\ \ \
| * | | sunxi: Hookup OTG USB controller supportHans de Goede2015-01-22-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hookup OTG USB controller support and enable the otg controller + USB-keyb on various tablets. This allows tablet owners to interact with u-boot without needing to solder a serial console onto their tablet PCB. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | | sunxi: video: Use frontend for dma on sun4i to fix memory bandwidth problemsHans de Goede2015-01-22-0/+120
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Testing has shown that on sun4i the display backend engine does not have deep enough fifo-s causing flickering / tearing in full-hd mode due to fifo underruns. On sun4i use the display frontend engine to do the dma from memory, as the frontend does have deep enough fifo-s. As added advantage of this is that it results in much better memory bandwidth as it reduces the amount of dram bank switches, for more details see: http://ssvb.github.io/2014/11/11/revisiting-fullhd-x11-desktop-performance-of-the-allwinner-a10.html Note that this changes the pipeline searched for in the simplefb node, we can get away with doing this now, since no kernel has yet shipped with simplefb dtb nodes, and I will make sure to get a simplefb node with the new pipeline into 3.19 before it ships. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | | sunxi: Stop differentiating between 512M and 1G variants of the same boardHans de Goede2015-01-22-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While working on adding more boards I noticed that we lack a config for the 512M cubieboard, and that some of the new boards which I want to add also have 512M and 1G variants, rather then adding 2 defconfig's for all of these, lets switch the exising boards which have both a 512M and 1024M variant over to the sun4i dram autoconfig code. This also drops the foo_RAMSIZE_defconfig variants of boards where we currently have 2 separate configs already. Note: 1) The newly introduced CONFIG_DRAM_EMR1 kconfig value is not used with a value other then its default for now, but we need this to be configurable to support some new boards with auto dram config. 2) We always set all CONFIG_DRAM_foo values in defconfigs, even if they match the defaults, this is done to make it more clear what values are used for a certain board. This has been tested on a Mele A1000, Mini-X and a Cubieboard, all 1G variants, the dram autoconfig code has also been tested on a 512M mk802 (a defconfig for the mk802 is added in a later patch). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | | sunxi: mmc: Add support for sun9i (A80)Hans de Goede2015-01-22-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The clocks on the A80 are hooked up slightly different, add support for this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | | sun9i: Add clock_sun9i.h with ccu register layout for sun9iHans de Goede2015-01-22-0/+141
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a headerfile with the sun9i ccu register layout. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | | sun9i: Add cpu_sun9i.h with iomem definesHans de Goede2015-01-22-0/+112
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a headerfile with all the base addresses from the sun9i blocks. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | | sunxi: Rename cpu.h to cpu_sun4i.hHans de Goede2015-01-22-145/+157
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sun4i - sun8i have (aprox.) the same iomem layout, but sun9i is quite different, so add a wrapper cpu.h which includes the right mach specific cpu_sun#i.h based on mach, like we already do with clock.h and dram.h . Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | | sunxi: Move clock_get_pllX / clock_set_pllX protos to mach specific headersHans de Goede2015-01-22-4/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Which pll-s are available depends on the machine type, move the clock_get_pllX / clock_set_pllX prototypes to the clock_sun?i.h header files so that we only declare what is actually available. e.g. clock_get_pll5p() is not available on sun6i / sun8i, and with sun9i we get a completely different set of plls. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | | sunxi: display: Make lcd display clk phase configurableHans de Goede2015-01-22-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While running some tests with an Olinuxino-A13-Micro + a 7" Olimex LCD module I noticed that the screen flickered. This is caused by the lcd display clk phase reg value being set to 0, where it should be 1 in this setup. This commit adds a Kconfig option for the lcd display clk phase, so that we can set it per board. This defaults to 1, because looking at all the fex files in sunxi-boards, that is by far the most used value. This commit updated the Ippo and MSI Primo73 tablet defconfigs to override the default of 1 with 0, as that is the correct value for those tablets, this keeps the register settings the same as before this commit. The Olinuxino-A13 defconfigs are not updated, changing the register setting for these boards from 0 to 1, this is intentional. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | | | Merge branch 'master' of git://git.denx.de/u-boot-uniphierTom Rini2015-01-22-33/+78
|\ \ \ \
| * | | | ARM: UniPhier: add SG_MEMCONF macros for DDR channel 2Masahiro Yamada2015-01-23-0/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PH1-sLD3, PH1-LD6b have DDR channel 2. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | | | ARM: UniPhier: rename SG_MEMCONF_* macros for readabilityMasahiro Yamada2015-01-23-20/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Match the suffixes of SG_MEMCONF_* macros with SZ_* macros defined by <linux/sizes.h> for readability. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | | | ARM: UniPhier: use <linux/sizes.h> for readabilityMasahiro Yamada2015-01-23-12/+13
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | | | ARM: UniPhier: remove __packed that causes a problem on GCC 4.9Masahiro Yamada2015-01-23-1/+1
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DDR PHY training function, ddrphy_prepare_training() would not work if compiled with GCC 4.9. The struct ddrphy (arch/arm/include/asm/arch-uniphier/ddrphy-regs.h) is specified with __packed because it represents a hardware register mapping, but it turned out to cause a problem on GCC 4.9. If -mno-unaligned-access is specified (yes, it is in arch/arm/cpu/armv7/config.mk), GCC 4.9 is aware of the __attribute__((packed)) and generates extra instructions to perform the memory access in a way that does not cause unaligned access. (Actually it is not need here because the register base, the first argument of the ddrphy_prepare_training(), is always given with a 4-byte aligned address.) Anyway, as a result, readl() / writel() is divided into byte-wise accesses. The problem is that this hardware only accepts 4-byte register access. Byte-wise accesses lead to unexpected behavior. There are some options to avoid this problem. [1] Remove -mno-unaligned-access [2] Add __aligned(4) along with __packed to struct ddrphy [3] Remove __packed from struct ddrphy [1] solves the problem for ARMv7, but it does not for pre-ARMv6 and ARMv6-M architectures where -mno-unaligned-access is default. So, [1] does not seem reasonable in terms of code portability. Both [2] and [3] work well, but [2] seems too much. All the members of struct ddrphy have the u32 type. No padding would be inserted even if __packed is dropped. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: Tom Rini <trini@ti.com>
* | | | mmc: zynq: Use phys_addr_t for addressesMichal Simek2015-01-21-1/+1
|/ / / | | | | | | | | | | | | | | | | | | phys_addr_t is designed for physical addresses that's why use it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | | mmc: rmobile: Add SDHC support for Renesas rmobile ARM SoCNobuhiro Iwamatsu2015-01-19-0/+192
| |/ |/| | | | | | | | | | | | | This adds Renesas rmobile ARM SoC's SD/MMC host support. This drivers tested with Gose board and Koelsch board. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-tiTom Rini2015-01-16-5/+45
|\ \
| * | arm: am437x: Enable hardware leveling for EMIFJames Doublesin2015-01-13-5/+45
| |/ | | | | | | | | | | | | | | | | | | | | | | Switch to using hardware leveling for certain parameters on the EMIF rather than using precalculated values. Doing this also means we have a common place now between am437x and am335x for setting emif_sdram_ref_ctrl with a value for the correct delay length. Tested-by: Felipe Balbi <balbi@ti.com> Tested-by: Tom Rini <trini@ti.com> Signed-off-by: James Doublesin <doublesin@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | sunxi: usbc: Add support for usb0 to the common usbc codeHans de Goede2015-01-14-1/+5
| | | | | | | | | | Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
generated by cgit v1.1 at 2024-11-14 20:53:50 +0000