summaryrefslogtreecommitdiff
path: root/arch/arm/cpu
Commit message (Collapse)AuthorAgeLines
* Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini2015-08-13-1/+6
|\
| * net: lpc32xx: add RMII phy mode supportVladimir Zapolskiy2015-08-11-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LPC32xx MAC and clock control configuration requires some minor quirks to deal with a phy connected by RMII. It's worth to mention that the kernel and legacy BSP from NXP sets SUPP_RESET_RMII == (1 << 11) bit, however the description of this bit is missing in shared LPC32x0 User Manual UM10326 Rev. 3, July 22, 2011 and in LPC32x0 Draft User Mannual Rev. 00.27, November 20, 2008, also in my tests an SMSC LAN8700 phy device connected over RMII seems to work correctly without touching this bit. Add support of RMII, if CONFIG_RMII is defined, this option is aligned with a number of boards, which already define the same config value. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Tested-by: Sylvain Lemieux <slemieux@tycoint.com>
* | ARM: SPL: Use CONFIG_SPL_DM not CONFIG_DMTom Rini2015-08-12-1/+1
| | | | | | | | | | | | | | | | | | We now have the CONFIG_SPL_DM for code within SPL to toggle caring about DM or not. Without this change platforms that do enable CONFIG_DM but not CONFIG_SPL_DM may be broken (such as OMAP5). Cc: Albert Aribaud <albert.u.boot@aribaud.net> Signed-off-by: Tom Rini <trini@konsulko.com>
* | gpio: omap: Drop 'method' parameterTom Rini2015-08-12-32/+34
| | | | | | | | | | | | | | | | | | | | The "method" parameter was part of the original port of the driver from the kernel. At some point this may have been added to allow for future differentiation (as omap1 and omap2 have different GPIO IP blocks, so this wasn't an unreasonable thing to do). At this point however it's just extra overhead, so drop. Signed-off-by: Tom Rini <trini@konsulko.com>
* | am33xx: Update DT files, add am335x_gp_evm_config targetTom Rini2015-08-12-30/+6
| | | | | | | | | | | | | | | | | | | | - Re-sync DT files for am33xx with Linux Kernel v4.1 - Include DT file now for the "AM335x GP EVM" and build target for it, via device tree and DM. - We only need to provide platform data for UART when OF_CONTROL isn't also enabled really. We can just push GPIO to coming from DT Signed-off-by: Tom Rini <trini@konsulko.com>
* | arm: am43xx: enable spi clockNikita Kiryanov2015-08-12-0/+1
| | | | | | | | | | | | | | | | | | | | Add spi clock to the list of am43xx basic clocks to make the SPI subsystem available on am43xx systems. Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Reviewed-by: Jagan Teki <jteki@openedev.com>
* | hisilicon: hi6220: Add a hi6220 pinmux driver.Peter Griffin2015-08-12-0/+193
| | | | | | | | | | | | | | This patch adds basic pinmux support for the hi6220 SoC, which is found on the hikey board. Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
* | imx28: Fix issue with GCC 5.xMåns Rullgård2015-08-12-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The semantics for non-static functions declared inline have changed in gcc5, causing the empty functions not to be emitted as an external symbol. Since lowlevel_init() is only referenced from start.S, it should not be declared inline at all. Reported-by: Otavio Salvador <otavio@ossystems.com.br> Tested-by: Otavio Salvador <otavio@ossystems.com.br> [trini: Reword commit message] Signed-off-by: Tom Rini <trini@konsulko.com>
* | ARM: DRA72: disable workaround for 801819Nishanth Menon2015-08-12-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DRA72x processor variants are single core and it does not export ACP[1]. Hence, we have no source for generating an external snoop requests which appear to be key to the deadlock in DRA72x design. Since we build the same image for DRA74x and DRA72x platforms, lets runtime detect and disable the workaround (in favor of performance) on DRA72x platforms. [1] http://infocenter.arm.com/help/topic/com.arm.doc.ddi0438i/BABIAJAG.html Suggested-by: Richard Woodruff <r-woodruff2@ti.com> Suggested-by: Brad Griffis <bgriffis@ti.com> Reviewed-by: Brad Griffis <bgriffis@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>
* | ARM: DRA7/ OMAP5: implement Auxiliary Control Register configurationNishanth Menon2015-08-12-0/+6
| | | | | | | | | | | | | | | | | | | | Implement logic for ACR(Auxiliary Control Register) configuration using ROM Code smc service. Suggested-by: Richard Woodruff <r-woodruff2@ti.com> Suggested-by: Brad Griffis <bgriffis@ti.com> Reviewed-by: Brad Griffis <bgriffis@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>
* | ARM: Introduce erratum workaround for 801819Nishanth Menon2015-08-12-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add workaround for Cortex-A15 ARM erratum 801819 which says in summary that "A livelock can occur in the L2 cache arbitration that might prevent a snoop from completing. Under certain conditions this can cause the system to deadlock. " Recommended workaround is as follows: Do both of the following: 1) Do not use the write-back no-allocate memory type. 2) Do not issue write-back cacheable stores at any time when the cache is disabled (SCTLR.C=0) and the MMU is enabled (SCTLR.M=1). Because it is implementation defined whether cacheable stores update the cache when the cache is disabled it is not expected that any portable code will execute cacheable stores when the cache is disabled. For implementations of Cortex-A15 configured without the “L2 arbitration register slice” option (typically one or two core systems), you must also do the following: 3) Disable write-streaming in each CPU by setting ACTLR[28:25] = 0b1111 So, we provide an option to disable write streaming on OMAP5 and DRA7. It is a rare condition to occur and may be enabled selectively based on platform acceptance of risk. Applies to: A15 revisions r2p0, r2p1, r2p2, r2p3 or r2p4 and REVIDR[3] is set to 0. Note: certain unicore SoCs *might* not have REVIDR[3] not set, but might not meet the condition for the erratum to occur when they donot have ACP (Accelerator Coherency Port) hooked to ACE (AXI Coherency Extensions). Such SoCs will need the work around handled in the SoC specific manner, since there is no ARM generic manner to detect such configurations. Based on ARM errata Document revision 18.0 (22 Nov 2013) Suggested-by: Richard Woodruff <r-woodruff2@ti.com> Suggested-by: Brad Griffis <bgriffis@ti.com> Reviewed-by: Brad Griffis <bgriffis@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>
* | ARM: cache: implement a default weak flush_cache() functionWu, Josh2015-08-12-39/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current many cpu use the same flush_cache() function, which just call the flush_dcache_range(). So implement a weak flush_cache() for all the cpus to use. In original weak flush_cache() in arch/arm/lib/cache.c, there has some code for ARM1136 & ARM926ejs. But in the arch/arm/cpu/arm1136/cpu.c and arch/arm/cpu/arm926ejs/cache.c, there implements a real flush_cache() function as well. That means the original code for ARM1136 & ARM926ejs in weak flush_cache() of arch/arm/lib/cache.c is totally useless. So in this patch remove such code in flush_cache() and only call flush_dcache_range(). Signed-off-by: Josh Wu <josh.wu@atmel.com>
* | ARM: cache: add an empty stub function for invalidate/flush dcacheWu, Josh2015-08-12-32/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | Since some driver like ohci, lcd used dcache functions. But some ARM cpu don't implement the invalidate_dcache_range()/flush_dcache_range() functions. To avoid compiling errors this patch adds an weak empty stub function for all ARM cpu in arch/arm/lib/cache.c. And ARM cpu still can implemnt its own cache functions on the cpu folder. Signed-off-by: Josh Wu <josh.wu@atmel.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | arm1136/arm1176: Merge cache handling codeAlexander Stein2015-08-12-53/+12
| | | | | | | | | | | | | | | | | | | | | | As both cores are similar merge the cache handling code for both CPUs to arm11 directory. Signed-off-by: Alexander Stein <alexanders83@web.de> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Tested-by: Stephen Warren <swarren@wwwdotorg.org> [trini: Add hunk to arch/arm/cpu/arm1136/Makefile] Signed-off-by: Tom Rini <trini@konsulko.com>
* | arm1136: Remove dead codeAlexander Stein2015-08-12-10/+0
| | | | | | | | | | | | | | | | | | Apparently lcd_panel_disable is not defined anywhere, so no config for an arm1136 board would have set CONFIG_LCD. Remove the unused code. Signed-off-by: Alexander Stein <alexanders83@web.de> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Tested-by: Stephen Warren <swarren@wwwdotorg.org>
* | LG Optimus Black (P970) codename sniper supportPaul Kocialkowski2015-08-12-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The LG Optimus Black (P970) codename sniper is a smartphone that was designed and manufactured by LG Electronics (LGE) and released back in 2011. It is using an OMAP3630 SoC GP version, which allows running U-Boot and the U-Boot SPL from the ground up. This port is aimed at running an Android version such as Replicant, the fully free Android distribution. However, support for upstream Linux with device-tree and common GNU/Linux distros boot commands could be added in the future. For more information about the journey to freeing this device, please read the series of blog posts at: http://code.paulk.fr/article20/a-hacker-s-journey-freeing-a-phone-from-the-ground-up-first-part Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Add CONFIG_OF_SUPPORT] Signed-off-by: Tom Rini <trini@konsulko.com>
* | omap3: Reboot mode supportPaul Kocialkowski2015-08-12-0/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Reboot mode is written in scratchpad memory before reboot in the form of a single char, that is the first letter of the reboot mode string as passed to the reboot function. This mechanism is supported on OMAP3 both my the upstream kernel and by various TI kernels. It is up to each board to make use of this mechanism or not. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@konsulko.com>
* | nand: lpc32xx: add SLC NAND controller supportVladimir Zapolskiy2015-08-12-0/+6
|/ | | | | | | | | | | | | | | | | | | | | The change adds support of LPC32xx SLC NAND controller. LPC32xx SoC has two different mutually exclusive NAND controllers to communicate with single and multiple layer chips. This simple driver allows to specify NAND chip timings and defines custom read_buf()/write_buf() operations, because access to 8-bit data register must be 32-bit aligned. Support of hardware ECC calculation is not implemented (data correction is always done by software), since it requires a working DMA engine. The driver can be included to an SPL image. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Scott Wood <scottwood@freescale.com> Tested-by: Sylvain Lemieux <slemieux@tycoint.com>
* sunxi: usb-phy: Never power off the usb portsHans de Goede2015-08-08-0/+7
| | | | | | | | | | | | | | | | | | | | | USB devices are not really designed to get the power bounced off and on at them. Esp. USB powered harddisks do not like this. Currently we power off the USB ports both on a "usb reset" and when booting the kernel, causing the usb-power to bounce off and then back on again. This patch removes the powering off calls, fixing the undesirable power bouncing. Note this requires some special handling for the OTG port: 1) We must skip the external vbus check if we've already enabled our own vbus to avoid false positives 2) If on an usb reset we no longer detect that the id-pin is grounded, turn off vbus as that means an external vbus may be present now Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* exynos: Add support for springSimon Glass2015-08-05-0/+6
| | | | | | | | | | Spring is the first ARM-based HP Chromebook 11. It is similar to snow and it uses the same Samsung Exynos5250 chip. But has some unusual features. Mainline support for it has lagged snow (both in kernel and U-Boot). Now that the exynos5 code is common we can support spring just by adding a device tree and a few lines of configuration. Signed-off-by: Simon Glass <sjg@chromium.org>
* exynos: Tidy up CPU frequency displaySimon Glass2015-08-05-5/+2
| | | | | | | | | | | | | Line up the display with the line below, e.g.: CPU: Exynos5250 @ 1.7 GHz Model: Google Spring DRAM: 2 GiB MMC: EXYNOS DWMMC: 0 Also show the speed as GHz where appropriate. Signed-off-by: Simon Glass <sjg@chromium.org>
* exynos: Add support for the DisplayPort hotplug detectSimon Glass2015-08-05-0/+10
| | | | | | Allow this function to be selected using the pinmux API. Signed-off-by: Simon Glass <sjg@chromium.org>
* exynos: Enable the debug UART in SPLSimon Glass2015-08-05-0/+5
| | | | | | | | As a debugging aid, allow UART3 to be used as a debug UART in SPL. This is a precursor to proper UART support, which requires a substantial refactor. Signed-off-by: Simon Glass <sjg@chromium.org>
* usb: musb-new: CONFIG_MUSB prefix replacement with CONFIG_USB_MUSBPaul Kocialkowski2015-08-05-1/+1
| | | | | | | | | USB-related options are usually prefixed with CONFIG_USB and platform-specific adaptation for the MUSB controller already have a CONFIG_USB_MUSB prefix, so this switches all MUSB-related options to a CONFIG_USB_MUSB prefix, for consistency. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* armv7/ls102xa: Fix non-boot cpus cannot correctly fall in spin tableWang Dongsheng2015-08-03-0/+8
| | | | | | | | | | | Bootrom will put cpus into WFE state when boot cpu release cpus, so target cpu cannot correctly go to spin state. Add 'sev' to wakeup non-boot cpu that hold on bootrom space, let target cpu can fall into u-boot spin table. Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-08-02-110/+376
|\
| * imx:mx6ul add dram spl configuration and header filePeng Fan2015-08-02-10/+51
| | | | | | | | | | | | | | | | | | | | | | | | 1. Define two structures mx6ul_iomux_ddr_regs and mx6ul_iomux_grp_regs. 2. Add a new function mx6ul_dram_iocfg to configure dram io. 3. Refactor MMDC1 macro, discard "#ifdef CONFIG_MX6SX". Since only mmdc0 channel exists on i.MX6SX/UL, redefine MMDC1 macro support runtime check, but not hardcoding #ifdef macros. 4. Introduce mx6ul-ddr.h, which includes the register address for DRAM IO configuration. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
| * imx: mx6ul update soc related settingsPeng Fan2015-08-02-5/+4
| | | | | | | | | | | | | | | | 1.Update WDOG settings. 2.No need to gate/ungate all PFDs for i.MX6UL. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com>
| * imx: mx6ul select SYS_L2CACHE_OFFPeng Fan2015-08-02-0/+4
| | | | | | | | | | | | | | | | | | i.MX6UL features an Cortex-A7 core, it does not have PL310 as other i.MX6 chips. To Cortex-A7 core, If D-Cache is enabled, L2 Cache is enabled. There is on specific switch for on/off L2 Cache, so default select SYS_L2CACHE_OFF. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
| * imx:mx6ul add clock supportPeng Fan2015-08-02-59/+92
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Add enet, uart, i2c, ipg clock support for i.MX6UL. 2. Correct get_periph_clk, it should account for MXC_CCM_CBCDR_PERIPH_CLK2_PODF_MASK. 3. Refactor get_mmdc_ch0_clk to make all i.MX6 share one function, but not use 'ifdef'. 4. Use CONFIG_FSL_QSPI for enable_qspi_clk, but not #ifdef CONFIG_MX6SX. 5. Use CONFIG_PCIE_IMX for pcie clock settings, use CONFIG_CMD_SATA for sata clock settings. In this way, we not need "#if defined(CONFIG_MX6Q) || defined....", only need one CONFIG_PCIE_IMX in header file. Signed-off-by: Ye.Li <B37916@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
| * arm: mx6: kconfig: don't select CPU_V7 per boardNikita Kiryanov2015-08-02-3/+0
| | | | | | | | | | | | | | | | | | | | CPU_V7 is already selected by ARCH_MX6, so no point in selecting it again by boards that depend on ARCH_MX6. Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
| * arm: mx6: cm-fx6: move cm-fx6 target under ARCH_MX6Nikita Kiryanov2015-08-02-0/+8
| | | | | | | | | | | | | | | | | | | | cm-fx6 is an MX6 based board, and the menuconfig hierarchy should reflect that. Make TARGET_CM_FX6 dependant on ARCH_MX6. Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
| * imx: mx6qp Enable PRG clock for IPUPeng Fan2015-08-02-0/+5
| | | | | | | | | | | | | | | | | | | | The i.MX6DQP has a PRG module, need to enable its clock for using IPU. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Brown Oliver <B37094@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
| * imx: mx6: hab : Remove the cache issue workaroud in hab for i.MX6QPYe.Li2015-08-02-1/+2
| | | | | | | | | | | | | | | | | | Since the i.MX6QP has fixed the issue in boot ROM, so remove the workaround for i.MX6QP. Signed-off-by: Ye.Li <B37916@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
| * imx: mx6: ccm: Change the clock settings for i.MX6QPPeng Fan2015-08-02-11/+24
| | | | | | | | | | | | | | | | | | | | | | | | Since i.MX6QP changes some CCM registers, so modify the clocks settings to follow the hardware changes. In c files, use runtime check and discard #ifdef. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
| * imx: add cpu type for i.MX6QP/DPPeng Fan2015-08-02-2/+9
| | | | | | | | | | | | | | | | | | | | | | Add cpu type for i.MX6QP/DP. This patch also fix is_mx6dqp(), since get_cpu_rev can return MXC_CPU_MX6QP and MXC_CPU_MX6DP, we should use: (is_cpu_type(MXC_CPU_MX6QP) || is_cpu_type(MXC_CPU_MX6DP)). Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
| * Merge branch 'master' of git://git.denx.de/u-bootStefano Babic2015-07-17-1/+8
| |\
| * | iMX: adding parsing to hab_status commandUlises Cardenas2015-07-10-1/+172
| | | | | | | | | | | | | | | | | | | | | | | | hab_status command returns a memory dump of the hab event log. But the raw data is not human-readable. Parsing such data into readable event will help to minimize debbuging time. Signed-off-by: Ulises Cardenas <Ulises.Cardenas@freescale.com>
| * | imx: mx6 add i2c4 clock support for i.MX6SXPeng Fan2015-07-10-4/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add I2C4 clock support for i.MX6SX. Since we use runtime check, but not macro, we need to remove `#ifdef ..` in crm_regs.h, or gcc will fail to compile the code succesfully. Making the macros only for i.MX6SX open to other i.MX6x maybe not a good choice, but we have runtime check. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
| * | imx: mx6 remove duplicated enable_cspi_clockPeng Fan2015-07-10-19/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | enable_spi_clock does the same thing with enable_cspi_clock, so remove enable_cspi_clock. Remove enable_cspi_clock prototype in header file convert cm_fx6/spl.c to use enable_spi_clk Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
* | | armv8: caches: Added routine to set non cacheable regionSiva Durga Prasad Paladugu2015-07-31-0/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added routine mmu_set_region_dcache_behaviour() to set a particular region as non cacheable. Define dummy routine for mmu_set_region_dcache_behaviour() to handle incase of dcache off. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini2015-07-29-2/+2
|\ \ \
| * | | armv8/cache: Fix page table creationThierry Reding2015-07-28-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While generating the page tables, a running integer index is shifted by SECTION_SHIFT (29) and causes overflow for any integer bigger than 7. The page tables therefore alias to the same 8 sections and cause U-Boot to hang once the MMU is enabled. Fix this by making the index a 64-bit unsigned integer and so avoid the overflow. swarren notes: currently "i" ranges from 0..8191 on all ARM64 boards, and "j" varies depending on RAM size; from 4 to 11 for a board with 4GB at physical address 2GB, as some Tegra boards have. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | | | Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblazeTom Rini2015-07-28-7/+89
|\ \ \ \
| * | | | zynqmp: Add support for IP detection via SLCRMichal Simek2015-07-28-0/+64
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SLCR can be used for IP configuration setting. Add SLCR skeleton to enable run time checking. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | | zynqmp: mp: Simplify set_r5_start handlingMichal Simek2015-07-28-6/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pass directly boot_addr which is LOVEC (0) or HIVEC (0xffff0000). No reason to use magic values 0 and 1. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | | zynqmp: Define ep config for ZynqMPSiva Durga Prasad Paladugu2015-07-28-3/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Define a new config "zynqmp_ep" for ZynqMP instead of xilinx_zynqmp. This defconfig supports all emulation platforms of ZynqMP. Also renamed TARGET_XILINX_ZYNQMP to ARCH_ZYNQMP. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | | zynqmp: Kconfig: Move zynqmp KconfigSiva Durga Prasad Paladugu2015-07-28-0/+15
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the zynqmp Kconfig from board to arch as there may be different boards under same architecture. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | | | stm32f4: add cpu clock option for 180 MHzAntonio Borneo2015-07-27-10/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While most stm32f4 run at 168 MHz, stm32f429 can work till 180 MHz. Add option to select 180 MHz through macro CONFIG_SYS_CLK_FREQ. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> To: Albert Aribaud <albert.u.boot@aribaud.net> To: Tom Rini <trini@konsulko.com> To: Kamil Lulko <rev13@wp.pl> Cc: u-boot@lists.denx.de
* | | | Kill unneeded #include <linux/kconfig.h>Masahiro Yamada2015-07-27-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Because the top-level Makefile forces all the source files to include include/linux/kconfig.h (see the UBOOTINCLUDE define), these includes are redundant. By the way, there are exceptions for the statement above; host programs. In fact, host tools in U-Boot depend on a particular board configuration, although I think they should not. So, some files still include <linux/config.h> to work around build errors on host tools. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> Acked-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-11-08 19:59:45 +0000