summaryrefslogtreecommitdiff
path: root/arch/arm/cpu
Commit message (Collapse)AuthorAgeLines
* ARM: HYP/non-sec: relocation before enable secondary coresPeng Fan2015-03-01-1/+8
| | | | | | | | | | If CONFIG_ARMV7_PSCI is not defined and CONFIG_ARMV7_SECURE_BASE is defined, smp_kicl_all_cpus may enable secondary cores and runs into secure_ram_addr( _smp_pen), before code is relocated to secure ram. So need relocation to secure ram before enable secondary cores. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
* edminiv2: switch to SPLAlbert ARIBAUD2015-02-25-0/+61
| | | | | | | | | | | | | | | | ED Mini V2 is based on Orion 5x which boots at fixed address 0xFFFF0000 in NOR Flash. Place SPL there, and switch U-Boot from .bin to .img format, stored in NOR Flash at 0xFFF90000. Note: this patch was tested on HW and works, i.e. it boots U-Boot properly, but SPL console output currently does not appear, due to GD being trashed by arch/arm/lib/spl.c. This trashing is soon to be removed, and then ED Mini V2 SPL console output will become visible. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
* Merge remote-tracking branch 'u-boot/master' into 'u-boot-arm/master'Albert ARIBAUD2015-02-24-22969/+1210
|\
| * rpi: add support for Raspberry Pi 2 model BStephen Warren2015-02-21-1/+1
| | | | | | | | | | | | | | | | USB doesn't seem to work yet; the controller detects the on-board Hub/ Ethernet device but can't read the descriptors from it. I haven't investigated yet. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
| * bcm2836 SoC support (used in Raspberry Pi 2 model B)Stephen Warren2015-02-21-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | The bcm2835 and bcm2836 are essentially identical, except: - The CPU is an ARM1176 v.s. a quad-core Cortex-A7. - The physical address of many IO controllers has moved. Rather than introducing a whole new bcm2836 value for $(SOC) or $(ARCH), update the existing bcm2835 code to handle the minor differences, and plumb it into the ARMv7 CPU architecture. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
| * bcm2835/rpi: add SPDX license tags for some filesStephen Warren2015-02-21-10/+2
| | | | | | | | Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
| * ARM: keystone: move SoC sources to mach-keystoneMasahiro Yamada2015-02-21-2190/+0
| | | | | | | | | | | | | | | | Move arch/arm/cpu/armv7/keystone/* -> arch/arm/mach-keystone/* Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Tom Rini <trini@ti.com>
| * ARM: versatile: move SoC sources to mach-versatileMasahiro Yamada2015-02-21-118/+0
| | | | | | | | | | | | | | Move arch/arm/cpu/arm926ejs/versatile/* -> arch/arm/mach-versatile/* Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * ARM: orion5x: move SoC sources to mach-orion5xMasahiro Yamada2015-02-21-832/+0
| | | | | | | | | | | | | | | | Move arch/arm/cpu/arm926ejs/orion5x/* -> arch/arm/mach-orion5x/* Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
| * ARM: highbank: move SoC sources to mach-highbankMasahiro Yamada2015-02-21-55/+0
| | | | | | | | | | | | | | | | Move arch/arm/cpu/armv7/highbank/* -> arch/arm/mach-highbank/* Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Rob Herring <robh@kernel.org>
| * ARM: nomadik: move SoC sources to mach-nomadikMasahiro Yamada2015-02-21-194/+0
| | | | | | | | | | | | | | | | | | Move arch/arm/cpu/arm926ejs/nomadik/* -> arch/arm/mach-nomadik/* Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Nomadik Linux Team <STN_WMM_nomadik_linux@list.st.com> Cc: Alessandro Rubini <rubini@unipv.it>
| * ARM: kirkwood: move SOC sources to mach-kirkwoodMasahiro Yamada2015-02-21-530/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Move arch/arm/cpu/arm926ejs/kirkwood/* -> arch/arm/mach-kirkwood/* Note: Perhaps, can we merge arch/arm/mach-kirkwood and arch/arm/mvebu-common into arch/arm/mach-mvebu, like Linux? Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Stefan Roese <sr@denx.de> Cc: Prafulla Wadaskar <prafulla@marvell.com> Cc: Luka Perkov <luka.perkov@sartura.hr>
| * ARM: davinci: move SoC sources to mach-davinciMasahiro Yamada2015-02-21-3230/+0
| | | | | | | | | | | | | | | | Move arch/arm/cpu/arm926ejs/davinci/* -> arch/arm/mach-davinci/* Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Tom Rini <trini@ti.com>
| * ARM: tegra: collect SoC sources into mach-tegraMasahiro Yamada2015-02-21-10753/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit moves files as follows: arch/arm/cpu/arm720t/tegra20/* -> arch/arm/mach-tegra/tegra20/* arch/arm/cpu/arm720t/tegra30/* -> arch/arm/mach-tegra/tegra30/* arch/arm/cpu/arm720t/tegra114/* -> arch/arm/mach-tegra/tegra114/* arch/arm/cpu/arm720t/tegra124* -> arch/arm/mach-tegra/tegra124/* arch/arm/cpu/arm720t/tegra-common/* -> arch/arm/mach-tegra/* arch/arm/cpu/armv7/tegra20/* -> arch/arm/mach-tegra/tegra20/* arch/arm/cpu/armv7/tegra30/* -> arch/arm/mach-tegra/tegra30/* arch/arm/cpu/armv7/tegra114/* -> arch/arm/mach-tegra/tegra114/* arch/arm/cpu/armv7/tegra124/* -> arch/arm/mach-tegra/tegra124/* arch/arm/cpu/armv7/tegra-common/* -> arch/arm/mach-tegra/* arch/arm/cpu/tegra20-common/* -> arch/arm/mach-tegra/tegra20/* arch/arm/cpu/tegra30-common/* -> arch/arm/mach-tegra/tegra30/* arch/arm/cpu/tegra114-common/* -> arch/arm/mach-tegra/tegra114/* arch/arm/cpu/tegra124-common/* -> arch/arm/mach-tegra/tegra124/* arch/arm/cpu/tegra-common/* -> arch/arm/mach-tegra/* Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Tested-by: Simon Glass <sjg@chromium.org> [ on nyan-big ] Cc: Stephen Warren <swarren@nvidia.com> Cc: Tom Warren <twarren@nvidia.com>
| * ARM: at91: collect SoC sources into mach-at91Masahiro Yamada2015-02-21-4266/+0
| | | | | | | | | | | | | | | | | | | | | | | | This commit moves source files as follows: arch/arm/cpu/arm920t/at91/* -> arch/arm/mach-at91/arm920t/* arch/arm/cpu/arm926ejs/at91/* -> arch/arm/mach-at91/arm926ejs/* arch/arm/cpu/armv7/at91/* -> arch/arm/mach-at91/armv7/* arch/arm/cpu/at91-common/* -> arch/arm/mach-at91/* Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Andreas Bießmann <andreas.devel@googlemail.co>
| * Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini2015-02-17-93/+133
| |\
| | * sunxi: Support the FEL boot mode in the regular u-boot buildSiarhei Siamashka2015-02-16-10/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | So that the CONFIG_SPL_FEL option is not needed anymore. And the regular SPL binary, generated by the default u-boot build, is now also bootable over USB in the FEL mode. The SPL still can boot from the SD card too. A bunch of system registers need to be saved/restored in order to ensure that the IRQ handler still works in the BROM FEL code after getting control back from the SPL. This is done in the sunxi code instead of abusing ifdefs in 'start.S'. The decision whether to load the main u-boot binary from the SD card or return to the FEL code in the BROM is done at runtime. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> [hdegoede@redhat.com: Since we now restore various regs before returning to the FEL BROM code we can drop the sunxi specific #ifdefs in start.S] Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| | * sunxi: Normalise FEL supportSimon Glass2015-02-16-88/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make sunxi's FEL code fit with the normal U-Boot boot sequence instead of creating its own. There are some #ifdefs required in start.S. Future work will hopefully remove these. This series is available at u-boot-dm, branch sunxi-working. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| | * arm: Allow lr to be saved by board codeSimon Glass2015-02-16-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The link register value can be required on some boards (e.g. FEL mode on sunxi) so use a branch instruction to jump to save_boot_params() instead of a branch link. This requires a branch back to save_boot_params_ret so adjust the users to deal with this. For exynos just drop the function since it doesn't do anything. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| | * sunxi: dram: Un-inline dram helper functionsHans de Goede2015-02-16-0/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | Move the dram helper functions to a separate C file, rather then having them as inline helpers in dram.h. This saves 144 bytes in the .text segment for sun6i builds. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * | keystone2: ddr3: eliminate using global ddr3_size variableVitaly Andrianov2015-02-16-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | KS2 ddr3 initialization uses ddr3_size global variable before u-boot relocation. Even if the variable is not being used after relocation, writing to it corrupts relocation table. This patch removes the global ddr3_size variable and uses local one instead. Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Tested-by: Nishanth Menon <nm@ti.com>
| * | clock_am43xx:Set the MAC clock to /5 for OPP100Steve Kipisz2015-02-16-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | When EMAC is in the boot order, the boot ROM sets OPP50 and the MAC clock is set to /2. SPL needs to change it to /5 for Ethernet to generate the correct txclk. This patch sets it correctly. Signed-off-by: Steve Kipisz <s-kipisz2@ti.com>
| * | ARM: DRA7-evm: DDR3: Update leveling valuesLokesh Vutla2015-02-16-30/+30
| | | | | | | | | | | | | | | | | | | | | Update the software leveling parameters. This fixes the random crash seen on DRA7-evm. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
| * | ARM: DRA7: EMIF: Update SDRAM_REF_CTRL register valueLokesh Vutla2015-02-16-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The value in SDRAM_REF_CTRL controls the delay time between the initial rising edge of DDR_RESETn to rising edge of DDR_CKE (JEDEC specs this as 500us). In order to achieve this, SDRAM_REF_CTRL should be written with a value corresponding to 500us delay before starting DDR initialization sequence, and configure proper value at the end of sequence. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
| * | ARM: DRA72x: DDR3: Fix EMIF timings for 666MHz clockAngela Stegmaier2015-02-16-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DDR3 timing and latency paramenters were not configured correctly for 666MHz. Fixing the timing and latency values according to Data sheet. This fixes the random crashes seen on DRA72-evm. Signed-off-by: Angela Stegmaier <angelabaker@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
| * | Merge git://git.denx.de/u-boot-samsungTom Rini2015-02-13-325/+324
| |\ \
| | * | Exynos: Clock: Cleanup soc_get_periph_rateAkshay Saraswat2015-02-13-39/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since we have src, div and pre-div mask bits defined corresponding to peripherals, calculation of clock specific to I2C appears redundant and confusing. Using clk_bit_info struct we can write calculations generic to all peripherals which makes code easy to understand and free from peripheral specific exceptions. Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | Exynos: clock: change mask bits as per peripheralAkshay Saraswat2015-02-13-73/+78
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have assumed and kept mask bits for divider and pre-divider as 0xf and 0xff, respectively. But these mask bits change from one peripheral to another, and hence, need to be specified in accordance with the peripherals. Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | Exynos5: Use clock_get_periph_rate generic APIAkshay Saraswat2015-02-13-235/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replacing SoC and peripheral specific function calls with generic clock_get_periph_rate calls to get the peripheral clocks. Also, removing dead code of peripheral and SoC specific function implementations which was used earlier for fetching peripheral clocks. This code is not being used anymore because of the introduction of generic clock_get_periph_rate function. Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | Exynos5: Fix exynos5_get_periph_rate calculationsAkshay Saraswat2015-02-13-8/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | exynos5_get_periph_rate function reads incorrect div for SDMMC2 & 3. It also reads prediv and does division only for SDMMC0 & 2 when actually various other peripherals need that. Adding changes to fix these mistakes in periph rate calculation. Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | Exynos542x: Add and enable get_periph_rate supportAkshay Saraswat2015-02-13-7/+146
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We planned to fetch peripheral rate through one generic API per peripheral. These generic peripheral functions are in turn expected to fetch apt values from a function refactored as per SoC versions. This patch adds support for fetching peripheral rates for Exynos5420 and Exynos5800. Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | Exynos542x: Move exynos5420_get_pll_clk up and renameAkshay Saraswat2015-02-13-41/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Moving exynos5420_get_pll_clk function definition up in the code to keep it together with rest of SoC_get_pll_clk functions. This makes code more legible and also removes the need of declaration when called before the position of definition in code. Also, renaming exynos5420_get_pll_clk to exynos542x_get_pll_clk because it is being used for both Exynos 5420 and 5800. Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | Exynos5: Fix compiler warnings due to clock_get_periph_rateAkshay Saraswat2015-02-13-31/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Apparently, members of clk_bit_info array do not map correctly to the members of enum periph_id. This mapping got broken after we changed periph_id(s) to reflect interrupt number instead of their position in a sequence. This patch intends to fix above mentioned issue. Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | EXYNOS5: Add function to enable exynos5420 usbdev phy ctrlJoonyoung Shim2015-02-13-2/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Exynos5420 has different registers with other exynos5 SoCs to control usb device phy, so need separated function to enable exynos5420 usb device phy. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | arm: exynos: fix the div value for set_mmc_clkJaehoon Chung2015-02-13-0/+4
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The most exynos used the "Ratio + 1" as div value. And value at register is "Ratio". So if want to set exact value, it needs to subtract one. Value at register ("Ratio") = div - 1 Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | Merge git://git.denx.de/u-boot-dmTom Rini2015-02-13-0/+78
| |\ \
| | * | dm: Kconfig: Move CONFIG_SYS_MALLOC_F_LEN to KconfigSimon Glass2015-02-12-0/+24
| | | | | | | | | | | | | | | | | | | | Move this option to Kconfig and update all boards. Signed-off-by: Simon Glass <sjg@chromium.org>
| | * | dm: omap3: Move driver model CONFIGs to KconfigSimon Glass2015-02-12-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove driver model CONFIGs from the board config headers and use Kconfig instead. Signed-off-by: Simon Glass <sjg@chromium.org>
| | * | dm: tegra: Move driver model CONFIGs to KconfigSimon Glass2015-02-12-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove driver model CONFIGs from the board config headers and use Kconfig instead. Signed-off-by: Simon Glass <sjg@chromium.org>
| | * | dm: exynos: Move driver model CONFIGs to KconfigSimon Glass2015-02-12-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove driver model CONFIGs from the board config headers and use Kconfig instead. Signed-off-by: Simon Glass <sjg@chromium.org>
| | * | dm: Move Raspberry Pi driver model CONFIGs to KconfigSimon Glass2015-02-12-0/+12
| | |/ | | | | | | | | | | | | | | | | | | Remove driver model CONFIGs from the board config header and use Kconfig instead. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | Merge branch 'rmobile' of git://git.denx.de/u-boot-shTom Rini2015-02-13-2/+16
| |\ \ | | |/ | |/|
| | * arm: rmobile: r8a7794: Enable SMP mode of Auxiliary Control RegisterNobuhiro Iwamatsu2015-02-13-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | r8a7794 uses ARM SoC of CA7 base. If we want to use dcache on CA7, we need to enable SMP bit of Auxiliary Control Register. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| | * arm: rmobile: Add SILK board supportVladimir Barinov2015-02-13-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SILK is an entry level development board based on R-Car E2 SoC (R8A7794) This commit supports the following peripherals: - SCIF, I2C, Ethernet, QSPI, MMC, USB Host Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Reviewed-by: Tom Rini <trini@ti.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | Merge branch 'master' of git://git.denx.de/u-boot-atmelTom Rini2015-02-10-191/+77
| |\ \
| | * | arm, at91, wdt: do not disable WDT in SPLHeiko Schocher2015-02-07-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | if CONFIG_AT91SAM9_WATCHDOG is set, do not disable WDT in SPL Signed-off-by: Heiko Schocher <hs@denx.de>
| | * | ARM: atmel: cleanup: remove at91cap9 related codeBo Shen2015-02-07-190/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As the at91cap9adk board is removed by commit: b5508344 (ARM: remove broken "at91cap9adk" board), so the at91cap9 code is not used anymore, and also the document for at91cap9 can not be found on www.atmel.com, so remove the at91cap9 related code. Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Andreas Bießmann <andreas.devel@googlemail.com>
| | * | ARM: atmel: sama5d4: build related file when enable SPLBo Shen2015-02-07-0/+1
| | | | | | | | | | | | | | | | Signed-off-by: Bo Shen <voice.shen@atmel.com>
| | * | ARM: atmel: sama5d4: can access DDR in interleave modeBo Shen2015-02-07-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The SAMAA5D4 SoC can access DDR in interleave mode. Signed-off-by: Bo Shen <voice.shen@atmel.com>
| | * | ARM: atmel: sama5d4: add interrupt redirect functionBo Shen2015-02-07-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Bo Shen <voice.shen@atmel.com> [fix subject] Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
generated by cgit v1.1 at 2024-11-18 16:44:54 +0000