summaryrefslogtreecommitdiff
path: root/arch/arm/cpu
Commit message (Collapse)AuthorAgeLines
* ARMv8/sec-firmware: fix a compile errorHou Zhiqiang2016-10-06-6/+16
| | | | | | | | | When enabled sec firmware framework, but lack of definition of the marco SEC_FIRMWARE_FIT_IMAGE, SEC_FIRMEWARE_FIT_CNF_NAME and SEC_FIRMWARE_TARGET_EL, there will be some build errors, so give a default definition. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
* ARM: Respect CONFIG_SPL_STACK define in lowlevel_init.SSiarhei Siamashka2016-10-06-0/+4
| | | | | | | | | | | | | | | The SPL and U-Boot proper may use different initial stack locations, which are configured via CONFIG_SPL_STACK and CONFIG_SYS_INIT_SP_ADDR defines. The lowlevel_init.S code needs to handle this in the same way as crt0.S Without this fix, setting the U-Boot stack location to some place, which is not safely accessible by the SPL (such as the DRAM), causes a very early SPL deadlock. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* spl: Kconfig: Move SPL_DISPLAY_PRINT to KconfigSimon Glass2016-10-06-0/+6
| | | | | | | | Move this option to Kconfig and tidy up existing uses. Also add a function comment to the header file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* ti: omap-common: Allow AM33xx devices to be built securelyAndrew F. Davis2016-10-02-1/+1
| | | | | | | | | | Like OMAP54xx and AM43xx family SoCs, AM33xx based SoCs have high security enabled models. Allow AM33xx devices to be built with HS Device Type Support. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com>
* am33xx: config.mk: Fix option used to enable SPI SPL image typeAndrew F. Davis2016-10-02-2/+2
| | | | | | | | | | | | | The option SPL_SPI_SUPPORT is used to enable support in SPL for loading images from SPI flash, it should not be used to determine the build type of the SPL image itself. The ability to read images from SPI flash does not imply the SPL will be booted from SPI flash. Unconditionally build SPI flash compatible SPL images. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* am33xx: config.mk: Add support for additional secure boot image typesAndrew F. Davis2016-10-02-2/+18
| | | | | | | | | | | | | | Depending on the boot media, different images are needed for secure devices. The build generates u-boot*_HS_* files as appropriate for the different boot modes. For AM33xx devices additional image types are needed for various SPL boot modes as the ROM checks for the name of the boot mode in the file it loads. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com>
* Kconfig: Separate AM33XX SOC config from target board configAndrew F. Davis2016-10-02-0/+87
| | | | | | | | | | | | | | | | The config option AM33XX is used in several boards and should be defined as a stand-alone option for this SOC. We break this out from target boards that use this SoC and common headers then enable AM33XX on in all the boards that used these targets to eliminate any functional change with this patch. This is similar to what has already been done in 9de852642cae ("arm: Kconfig: Add support for AM43xx SoC specific Kconfig") and is done for the same reasons. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ARM: omap5: add fdt secure dram reservation fixupDaniel Allred2016-10-02-2/+62
| | | | | | | | | | Adds a secure dram reservation fixup for secure devices, when a region in the emif has been set aside for secure world use. The size is defined by the CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE config option. Signed-off-by: Daniel Allred <d-allred@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ARM: DRA7: Add secure emif setup callsDaniel Allred2016-10-02-0/+15
| | | | | | | | | | | After EMIF DRAM is configured, but before it is used, calls are made on secure devices to reserve any configured memory region needed by the secure world and then to lock the EMIF firewall configuration. If any other firewall configuration needs to be applied, it must happen before the lock call. Signed-off-by: Daniel Allred <d-allred@ti.com>
* arm: omap5: secure API for EMIF memory reservationsDaniel Allred2016-10-02-0/+127
| | | | | | | | | | | Create a few public APIs which rely on secure world ROM/HAL APIs for their implementation. These are intended to be used to reserve a portion of the EMIF memory and configure hardware firewalls around that region to prevent public code from manipulating or interfering with that memory. Signed-off-by: Daniel Allred <d-allred@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ti: omap5: Add Kconfig options for secure EMIF reservationsDaniel Allred2016-10-02-0/+26
| | | | | | | | | | | | | Adds start address and size config options for setting aside a portion of the EMIF memory space for usage by security software (like a secure OS/TEE). There are two sizes, a total size and a protected size. The region is divided into protected (secure) and unprotected (public) regions, that are contiguous and start at the start address given. If the start address is zero, the intention is that the region will be automatically placed at the end of the available external DRAM space. Signed-off-by: Daniel Allred <d-allred@ti.com>
* dra7x: boot: add dfu bootmode supportB, Ravi2016-09-27-0/+5
| | | | | | | | This patch enables the DFU boot mode support for dra7x platform. Signed-off-by: Ravi Babu <ravibabu@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-09-26-26/+564
|\ | | | | | | | | | | | | trini: Drop local memset() from examples/standalone/mem_to_mem_idma2intr.c Signed-off-by: Tom Rini <trini@konsulko.com>
| * armv7: ls102xa: Rename GIC_ADDR and DCSR_RCPM_ADDRYork Sun2016-09-26-2/+2
| | | | | | | | | | | | | | | | | | Instead of using CONFIG_* name space, rename these two macros to SYS_FSL_* space. Signed-off-by: York Sun <york.sun@nxp.com> CC: Hongbo Zhang <hongbo.zhang@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * armv7: ls1021a: Convert CONFIG_LS1_DEEP_SLEEP to Kconfig optionYork Sun2016-09-26-0/+3
| | | | | | | | | | | | | | | | Move this option to Kconfig and clean up existing uses. Signed-off-by: York Sun <york.sun@nxp.com> CC: Hongbo Zhang <hongbo.zhang@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * Convert CONFIG_SYS_FSL_ERRATUM_A010315 to Kconfig optionYork Sun2016-09-26-0/+11
| | | | | | | | | | | | | | Move this option to Kconfig and clean up existing uses. Signed-off-by: York Sun <york.sun@nxp.com> CC: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
| * armv8: ls1012a: Convert CONFIG_LS1012A to Kconfig option ARCH_LS1021AYork Sun2016-09-26-3/+10
| | | | | | | | | | | | | | | | | | Move this config to Kconfig option and clean up existing uses. Signed-off-by: York Sun <york.sun@nxp.com> CC: Calvin Johnson <calvin.johnson@nxp.com> CC: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * armv8: ls1046a: Convert CONFIG_LS1046A to Kconfig option ARCH_LS1046AYork Sun2016-09-26-3/+5
| | | | | | | | | | | | | | | | | | Move this option to Kconfig and clean up existing uses. Signed-off-by: York Sun <york.sun@nxp.com> CC: Mingkai Hu <mingkai.hu@nxp.com> CC: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * armv8: ls1046a: disable SATA ECC in DCSRShaohui Xie2016-09-14-0/+4
| | | | | | | | | | | | | | | | | | This is a workaround to fix SATA CRC error. Once the root cause is found the ECC disabling will be removed. Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: fsl-layerscape: spl: remove BSS clearing and board_init_rQianyu Gong2016-09-14-5/+0
| | | | | | | | | | | | | | | | | | | | As per the top level U-Boot README "Board Initialisation Flow" section, board_init_f() should return without calling board_init_r() directly. Clearing BSS and calling board_init_r() will be done in crt0_64.S. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: fsl-layerscape: Increase L2 Data RAM latency and L2 Tag RAM latencyMingkai Hu2016-09-14-0/+15
| | | | | | | | | | | | | | | | | | | | | | According to design specification, the L2 cache operates at the same frequency as the A72 CPUs in the cluster with a 3-cycle latency, so increase the L2 Data RAM and Tag RAM latency to 3 cycles, or else, will run into different call trace issues. Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * nxp: ls102xa: add LS1 PSCI system suspendHongbo Zhang2016-09-14-1/+248
| | | | | | | | | | | | | | | | The deep sleep function of LS1 platform, is mapped into PSCI system suspend function, this patch adds implementation of it. Signed-off-by: Hongbo Zhang <hongbo.zhang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * nxp: ls102xa: add EPU Finite State MachineHongbo Zhang2016-09-14-0/+165
| | | | | | | | | | | | | | | | The EPU Finite State Machie (FSM) is used in both the last stage of system suspend and the earliest stage of system resume. Signed-off-by: Hongbo Zhang <hongbo.zhang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv7: psci: make v7_flush_dcache_all public for all psci codeHongbo Zhang2016-09-14-3/+3
| | | | | | | | | | | | | | | | | | | | | | The v7_flush_dcache_all function will be called by ls102xa platform system suspend, it is necessary to make it a public call instead of a local one, but changing the LENTRY to ENTRY isn't enough, because there is another one using the same name, so this one gets a psci_ prefix. Signed-off-by: Hongbo Zhang <hongbo.zhang@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls2080a: Remove debug server supportYork Sun2016-09-14-5/+0
| | | | | | | | | | | | Debug server feature has been dropped from roadmap. Signed-off-by: York Sun <york.sun@nxp.com>
| * fsl-layerscape: Add workaround for PCIe erratum A010315Hou Zhiqiang2016-09-14-0/+30
| | | | | | | | | | | | | | | | | | | | As the access to serders protocol unselected PCIe controller will hang. So disable the R/W permission to unselected PCIe controller including its CCSR, IO space and memory space according to the serders protocol field of RCW. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * arm: fsl-layerscape: move forward the non-secure access permission setupHou Zhiqiang2016-09-14-4/+10
| | | | | | | | | | | | | | | | | | | | Move forward the basic non-secure access enable operation, so the subsequent individual device access permission can override it. And collect the dispersed callers in board level, and then move them to SoC level. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * fsl: serdes: ensure accessing the initialized maps of serdes protocolHou Zhiqiang2016-09-14-2/+37
| | | | | | | | | | | | | | | | | | | | | | | | Up to now, the function is_serdes_configed() doesn't check if the map of serdes protocol is initialized before accessing it. The function is_serdes_configed() will get wrong result when it was called before the serdes protocol maps initialized. As the first element of the map isn't used for any device, so use it as the flag to indicate if the map has been initialized. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * ls1043ardb: PPA: add PPA validation in case of secure bootSumit Garg2016-09-14-0/+21
| | | | | | | | | | | | | | | | | | | | As part of Secure Boot Chain of trust, PPA image must be validated before the image is started. The code for the same has been added. Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com> Signed-off-by: Sumit Garg <sumit.garg@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: fsl-layerscape: Update ddr erratum a008336Shengzhou Liu2016-09-14-2/+4
| | | | | | | | | | | | | | | | | | DDR erratum A008336 only applies to DDR controller v5.2.0. DDR controller v5.2.1 already has default 0x43b30002 in EDDRTQCR1 register for optimal performance. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | treewide: replace #include <asm/errno.h> with <linux/errno.h>Masahiro Yamada2016-09-23-30/+30
| | | | | | | | | | | | | | | | | | | | | | Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have the same content. (both just wrap <asm-generic/errno.h>) Replace all include directives for <asm/errno.h> with <linux/errno.h>. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Fixup include/clk.] Signed-off-by: Tom Rini <trini@konsulko.com>
* | arch, board: squash lines for immediate returnMasahiro Yamada2016-09-23-12/+3
| | | | | | | | | | | | | | | | Remove unneeded variables and assignments. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com> Reviewed-by: Angelo Dureghello <angelo@sysam.it>
* | ARM64: zynqmp: Fix USB ulpi phy sequenceMichal Simek2016-09-22-4/+0
| | | | | | | | | | | | | | It should be enough to call low(5us)->high pulse for all cases to provide proper reset. There is no need to call high->low->high. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | ARM64: zynqmp: Add support for USB ulpi phy reset via mode pinsMichal Simek2016-09-22-0/+23
| | | | | | | | | | | | | | | | | | | | Mode pins can be used as output for reset. Xilinx boards are using this feature as additional way how to reset USB phys and also others chips on the boards. Mode1 is used on all these boards for this feature. Let SPL toggle reset on this pin by default. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | ARM64: zynqmp: Add support for DFU from SPLMichal Simek2016-09-22-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SPL needs to have bigger stack size because of USB. Simple malloc needs to be disabled because dfu code requires different allocation functions. There is no space in OCM that's why random place in DDR is used. BOOTD must be disabled because it is causing compilation error. All variables are disabled and used only variables valid for DFU because they are simple huge. Including automatic variables added by CONFIG_ENV_VARS_UBOOT_CONFIG. Hardcode addresses for u-boot, atf, kernel and dtb just for SPL DFU code. Enable SPL DFU for zcu100. Create new usb_dfu_spl variable just to run Linux kernel loaded in SPL. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | ARM64: zynqmp: Force certain bootmode for SPLMichal Simek2016-09-22-0/+55
| | | | | | | | | | | | | | | | ZynqMP provides an option to overwrite bootmode setting which can change SPL behavior. For example: boot SPL via JTAG and then SPL loads images from SD. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | Convert CONFIG_SPL_SPI_SUPPORT to KconfigSimon Glass2016-09-16-0/+3
| | | | | | | | | | | | Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Convert CONFIG_SPL_SPI_FLASH_SUPPORT to KconfigSimon Glass2016-09-16-0/+3
| | | | | | | | | | | | Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Convert CONFIG_SPL_SERIAL_SUPPORT to KconfigSimon Glass2016-09-16-0/+12
| | | | | | | | | | | | Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Convert CONFIG_SPL_POWER_SUPPORT to KconfigSimon Glass2016-09-16-0/+9
| | | | | | | | | | | | Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Convert CONFIG_SPL_NAND_SUPPORT to KconfigSimon Glass2016-09-16-0/+9
| | | | | | | | | | | | Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Convert CONFIG_SPL_MMC_SUPPORT to KconfigSimon Glass2016-09-16-0/+12
| | | | | | | | | | | | Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Convert CONFIG_SPL_LIBGENERIC_SUPPORT to KconfigSimon Glass2016-09-16-0/+12
| | | | | | | | | | | | Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Convert CONFIG_SPL_LIBDISK_SUPPORT to KconfigSimon Glass2016-09-16-0/+12
| | | | | | | | | | | | Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Convert CONFIG_SPL_LIBCOMMON_SUPPORT to KconfigSimon Glass2016-09-16-0/+12
| | | | | | | | | | | | Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Convert CONFIG_SPL_I2C_SUPPORT to KconfigSimon Glass2016-09-16-0/+12
| | | | | | | | | | | | Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Convert CONFIG_SPL_GPIO_SUPPORT to KconfigSimon Glass2016-09-16-0/+12
| | | | | | | | | | | | Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Convert CONFIG_SPL_FAT_SUPPORT to KconfigSimon Glass2016-09-16-0/+12
| | | | | | | | | | | | Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Convert CONFIG_SPL_EXT_SUPPORT to KconfigSimon Glass2016-09-16-0/+13
| | | | | | | | | | | | Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
* | spear: Use upper case for CONFIG optionsSimon Glass2016-09-16-1/+1
|/ | | | | | | | | There are a few options which use lower case. We should use upper case for all CONFIG options. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Add usbtty/nand hunk to include/configs/spear3xx_evb.h] Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.1 at 2024-09-18 20:15:24 +0000