summaryrefslogtreecommitdiff
path: root/arch/arm/cpu
Commit message (Collapse)AuthorAgeLines
...
| * | | ARMv8/layerscape: Add FSL PPA supportHou Zhiqiang2016-07-19-0/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The FSL Primary Protected Application (PPA) is a software component loaded during boot which runs in TrustZone and remains resident after boot. Use the secure firmware framework to integrate FSL PPA into U-Boot. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | | ARMv8: add the secure monitor firmware frameworkHou Zhiqiang2016-07-19-0/+324
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This framework is introduced for ARMv8 secure monitor mode firmware. The main functions of the framework are, on EL3, verify the firmware, load it to the secure memory and jump into it, and while it returned to U-Boot, do some necessary setups at the 'target exception level' that is determined by the respective secure firmware. So far, the framework support only FIT format image, and need to define the name of which config node should be used in 'configurations' and the name of property for the raw secure firmware image in that config. The FIT image should be stored in Byte accessing memory, such as NOR Flash, or else it should be copied to main memory to use this framework. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | | armv8: fsl-layerscape: add i/d-cache enable function to enable_cachesHou Zhiqiang2016-07-19-4/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This function assume that the d-cache and MMU has been enabled earlier, so it just created MMU table in main memory. But the assumption is not always correct, for example, the early setup is done in EL3, while enable_caches() is called when the PE has turned into another EL. Define the function mmu_setup() for fsl-layerscape to cover the weak one. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | | armv8: layerscape: Convert to use common MMU frameworkYork Sun2016-07-19-309/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Drop platform code to create static MMU tables. Use common framework to create MMU tables on the run. Tested on LS2080ARDB with secure and non-secure ram scenarios. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | armv8: mmu: Add support of non-identical mappingYork Sun2016-07-15-28/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce virtual and physical addresses in the mapping table. This change have no impact on existing boards because they all use idential mapping. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | armv8: mmu: split block if necessaryYork Sun2016-07-15-32/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When page tables are created, allow later table to be created on previous block entry. Splitting block feature is already working with current code. This patch only rearranges the code order and adds one condition to call split_block(). Signed-off-by: York Sun <york.sun@nxp.com>
| * | | armv8: mmu: house cleaningYork Sun2016-07-15-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make setup_pgtages() and get_tcr() available for platform code to customize MMU tables. Remove unintentional call of create_table(). Signed-off-by: York Sun <york.sun@nxp.com>
| * | | armv8: Move secure_ram variable out of generic global dataYork Sun2016-07-15-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Secure_ram variable was put in generic global data. But only ARMv8 uses this variable. Move it to ARM specific data structure. Signed-off-by: York Sun <york.sun@nxp.com>
* | | | Various, unrelated tree-wide typo fixes.Robert P. J. Day2016-07-16-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix a number of typos, including: * "compatble" -> "compatible" * "eanbeld" -> "enabled" * "envrionment" -> "environment" * "FTD" -> "FDT" (for "flattened device tree") * "ommitted" -> "omitted" * "overriden" -> "overridden" * "partiton" -> "partition" * "propogate" -> "propagate" * "resourse" -> "resource" * "rest in piece" -> "rest in peace" * "suport" -> "support" * "varible" -> "variable" Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
* | | | Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini2016-07-15-144/+154
|\ \ \ \
| * | | | ARM: PSCI: Make psci_get_cpu_stack_top local to armv7/psci.SChen-Yu Tsai2016-07-15-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we have a secure data section for storing variables, there should be no need for platform code to get the stack address. Make psci_get_cpu_stack_top a local function, as it should only be used in armv7/psci.S and only by psci_stack_setup. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | | ARM: PSCI: Switch to per-CPU target PC storage in secure data sectionChen-Yu Tsai2016-07-15-17/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we have a secure data section and space to store per-CPU target PC address, switch to it instead of storing the target PC on the stack. Also save clobbered r4-r7 registers on the stack and restore them on return in psci_cpu_on for Tegra, i.MX7, and LS102xA platforms. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | | ARM: PSCI: Add helper functions to access per-CPU target PC storageChen-Yu Tsai2016-07-15-1/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we have a data section, add helper functions to save and fetch per-CPU target PC. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | | ARM: Add secure section for initialized dataChen-Yu Tsai2016-07-15-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The secure monitor may need to store global or static values within the secure section of memory, such as target PC or CPU power status. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | | ARM: Move __secure definition to common asm/secure.hChen-Yu Tsai2016-07-15-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sunxi and i.mx7 both define the __secure modifier to put functions in the secure section. Move this to a common place. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | | ARM: Add CONFIG_ARMV7_SECURE_MAX_SIZE and check size of secure sectionChen-Yu Tsai2016-07-15-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As the PSCI implementation grows, we might exceed the size of the secure memory that holds the firmware. Add a configurable CONFIG_ARMV7_SECURE_MAX_SIZE so platforms can define how much secure memory is available. The linker then checks the size of the whole secure section against this. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | | ARM: PSCI: Remove unused psci_text_end symbolChen-Yu Tsai2016-07-15-9/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | psci_text_end was used to calculate the PSCI stack address following the secure monitor text. Now that we have an explicit secure stack section, this is no longer used. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | | ARM: PSCI: Allocate PSCI stack in secure stack sectionChen-Yu Tsai2016-07-15-11/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we have a secure stack section that guarantees usable memory, allocate the PSCI stacks in that section. Also add a diagram detailing how the stacks are placed in memory. Reserved space for the target PC remains unchanged. This should be moved to global variables within a secure data section in the future. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | | ARM: Add an empty secure stack sectionChen-Yu Tsai2016-07-15-9/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Until now we've been using memory beyond psci_text_end as stack space for the secure monitor or PSCI implementation, even if space was not allocated for it. This was partially fixed in ("ARM: allocate extra space for PSCI stack in secure section during link phase"). However, calculating stack space from psci_text_end in one place, while allocating the space in another is error prone. This patch adds a separate empty secure stack section, with space for CONFIG_ARMV7_PSCI_NR_CPUS stacks, each 1 KB. There's also __secure_stack_start and __secure_stack_end symbols. The linker script handles calculating the correct VMAs for the stack section. For platforms that relocate/copy the secure monitor before using it, the space is not allocated in the executable, saving space. For platforms that do not define CONFIG_ARMV7_PSCI_NR_CPUS, a whole page of stack space for 4 CPUs is allocated, matching the previous behavior. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | | ARM: Page align secure section only when it is executed in situChen-Yu Tsai2016-07-15-5/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Targets that define CONFIG_ARMV7_SECURE_BASE will copy the secure section to another address before execution. Since the secure section in the u-boot image is only storage, there's no reason to page align it and increase the binary image size. Page align the secure section only when CONFIG_ARMV7_SECURE_BASE is not defined. And instead of just aligning the __secure_start symbol, align the whole .__secure_start section. This also makes the section empty, so we need to add KEEP() to the input entry to prevent the section from being garbage collected. Also use ld constant "COMMONPAGESIZE" instead of hardcoded page size. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | | sunxi: Move remaining PSCI assembly code to CChen-Yu Tsai2016-07-15-54/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch finishes the rewrite of sunxi specific PSCI parts into C code. The assembly-only stack setup code has been factored out into a common function for ARMv7. The GIC setup code can be renamed as psci_arch_init. And we can use an empty stub function for psci_text_end. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | | ARM: PSCI: Split out common stack setup code from psci_arch_initChen-Yu Tsai2016-07-15-42/+25
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Every platform has the same stack setup code in assembly as part of psci_arch_init. Move this out into a common separate function, psci_stack_setup, for all platforms. This will allow us to move the remaining parts of psci_arch_init into C code, or drop it entirely. Also provide a stub no-op psci_arch_init for platforms that don't need their own specific setup code. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | | | arm: Don't invalidate unaligned cache regionsSimon Glass2016-07-14-21/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At present armv7 will unhappily invalidate a cache region and print an error message. Make it skip the operation instead, as it does with other cache operations. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marek Vasut <marex@denx.de>
* | | | arm: Move check_cache_range() into a common placeSimon Glass2016-07-14-51/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This code is common, so move it into a common file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marek Vasut <marex@denx.de>
* | | | ARM: OMAP5+: Enable errata i727Lokesh Vutla2016-07-14-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Errata i727 is applicable on all OMAP5 and DRA7 variants but enabled only on OMAP5 ES1.0. So, enable it on all platforms. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | | stm32: Add SDRAM support for stm32f746 discovery boardToshifumi NISHINAGA2016-07-14-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds SDRAM support for stm32f746 discovery board. This patch depends on previous patch. This patch is based on STM32F4 and emcraft's[1]. [1]: https://github.com/EmcraftSystems/u-boot Signed-off-by: Toshifumi NISHINAGA <tnishinaga.dev@gmail.com>
* | | | arm: am4x: add U-Boot FIT signing and SPL image post-processingMadan Srinivas2016-07-14-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Modify the SPL build procedure for AM437x high-security (HS) device variants to create a secure u-boot_HS.img FIT blob that contains U-Boot and DTB artifacts signed (and optionally encrypted) with a TI-specific process based on the CONFIG_TI_SECURE_DEVICE config option and the externally-provided image signing tool. Also populate the corresponding FIT image post processing call to be performed during SPL runtime. Signed-off-by: Madan Srinivas <madans@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | | arm: omap5: add U-Boot FIT signing and SPL image post-processingAndreas Dannenberg2016-07-14-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Modify the SPL build procedure for AM57xx and DRA7xx high-security (HS) device variants to create a secure u-boot_HS.img FIT blob that contains U-Boot and DTB artifacts signed with a TI-specific process based on the CONFIG_TI_SECURE_DEVICE config option and the externally-provided image signing tool. Also populate the corresponding FIT image post processing call to be performed during SPL runtime. Signed-off-by: Daniel Allred <d-allred@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | | arm: omap-common: Update to generate secure U-Boot FIT blobAndreas Dannenberg2016-07-14-14/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds commands so that when a secure device is in use and the SPL is built to load a FIT image (with combined U-Boot binary and various DTBs), these components that get fed into the FIT are all processed to be signed/encrypted/etc. as per the operations performed by the secure-binary-image.sh script of the TI SECDEV package. Furthermore, perform minor comments cleanup to make better use of the available space. Signed-off-by: Daniel Allred <d-allred@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | | | arm: omap-common: secure ROM signature verify APIAndreas Dannenberg2016-07-14-0/+88
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds an API that verifies a signature attached to an image (binary blob). This API is basically a entry to a secure ROM service provided by the device and accessed via an SMC call, using a particular calling convention. Signed-off-by: Daniel Allred <d-allred@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | | arm: omap-common: add secure rom call API for secure devicesAndreas Dannenberg2016-07-14-0/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds a generic C-callable API for making secure ROM calls on OMAP and OMAP-compatible devices. This API provides the important function of flushing the ROM call arguments to memory from the cache, so that the secure world will have a coherent view of those arguments. Then is simply calls the omap_smc_sec routine. Signed-off-by: Daniel Allred <d-allred@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | | arm: omap-common: add secure smc entryDaniel Allred2016-07-14-9/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add an interface for calling secure ROM APIs across a range of OMAP and OMAP compatible high-security (HS) device variants. While at it, also perform minor cleanup/alignment without any change in functionality. Signed-off-by: Daniel Allred <d-allred@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | | arm: cache: add missing dummy functions for when dcache disabledDaniel Allred2016-07-14-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds missing flush_dcache_range and invalidate_dcache_range dummy (empty) placeholder functions to the #else portion of the #ifndef CONFIG_SYS_DCACHE_OFF, where full implementations of these functions are defined. Signed-off-by: Daniel Allred <d-allred@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | | arm64: add better and more generic spin-table supportMasahiro Yamada2016-07-14-4/+113
|/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are two enable methods supported by ARM64 Linux; psci and spin-table. The latter is simpler and helpful for quick SoC bring up. My main motivation for this patch is to improve the spin-table support, which allows us to boot an ARMv8 system without the ARM Trusted Firmware. Currently, we have multi-entry code in arch/arm/cpu/armv8/start.S and the spin-table is supported in a really ad-hoc way, and I see some problems: - We must hard-code CPU_RELEASE_ADDR so that it matches the "cpu-release-addr" property in the DT that comes from the kernel tree. - The Documentation/arm64/booting.txt in Linux requires that the release address must be zero-initialized, but it is not cared by the common code in U-Boot. We must do it in a board function. - There is no systematic way to protect the spin-table code from the kernel. We are supposed to do it in a board specific manner, but it is difficult to predict where the spin-table code will be located after the relocation. So, it also makes difficult to hard-code /memreserve/ in the DT of the kernel. So, here is a patch to solve those problems; the DT is run-time modified to reserve the spin-table code (+ cpu-release-addr). Also, the "cpu-release-addr" property is set to an appropriate address after the relocation, which means we no longer need the hard-coded CPU_RELEASE_ADDR. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | | Revert "armv8: Enable CPUECTLR.SMPEN for coherency"Tom Rini2016-07-14-8/+0
|/ / | | | | | | | | | | | | | | | | Upon further review this breaks most other platforms as we need to check what core we're running on before touching it at all. This reverts commit d73718f3236c520a92efa401084c658e6cc067f3. Signed-off-by: Tom Rini <trini@konsulko.com>
* | armv8: Enable CPUECTLR.SMPEN for coherencyMingkai Hu2016-07-08-0/+8
|/ | | | | | | | | | | | | | | | For A53, data coherency is enabled only when the CPUECTLR.SMPEN bit is set. The SMPEN bit should be set before enabling the data cache. If not enabled, the cache is not coherent with other cores and data corruption could occur. For A57/A72, SMPEN bit enables the processor to receive instruction cache and TLB maintenance operations broadcast from other processors in the cluster. This bit should be set before enabling the caches and MMU, or performing any cache and TLB maintenance operations. Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-06-28-5/+7
|\
| * armv8: fsl-layerscape: Append "A" in SoC name for ARM based SoCsPrabhakar Kushwaha2016-06-28-2/+2
| | | | | | | | | | | | | | | | | | | | | | Freescale ARMv8 SoC name ends with "A" to represent ARM SoCs. like LS2080A, LS1043A, LS1012A. So append "A" to SoC names. Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8/fsl_lsch2: Correct the cores frequency initializationHou Zhiqiang2016-06-24-3/+5
| | | | | | | | | | | | | | | | The register CLKCNCSR controls the frequency of all cores in the same cluster. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | common: Pass the boot device into spl_boot_mode()Marek Vasut2016-06-26-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SPL code already knows which boot device it calls the spl_boot_mode() on, so pass that information into the function. This allows the code of spl_boot_mode() avoid invoking spl_boot_device() again, but it also lets board_boot_order() correctly alter the behavior of the boot process. The later one is important, since in certain cases, it is desired that spl_boot_device() return value be overriden using board_boot_order(). Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> [add newly introduced zynq variant] Signed-aff-by: Andreas Bießmann <andreas@biessmann.org>
* | arm: bcm235xx: update clock frameworkSteve Rae2016-06-24-5/+5
| | | | | | | | | | | | | | | | The handling of the "usage counter" is incorrect, and the clock should only be disabled when transitioning from 1 to 0. Reported-by: Chris Brand <chris.brand@broadcom.com> Signed-off-by: Steve Rae <srae@broadcom.com>
* | arm: bcm235xx: fix kps ccuChris Brand2016-06-24-5/+1
| | | | | | | | | | | | | | The Kona Peripheral Slave CCU has 4 policy mask registers, not 8. Signed-off-by: Chris Brand <chris.brand@broadcom.com> Signed-off-by: Steve Rae <srae@broadcom.com>
* | ARM: armv7: refactor Makefile slightlyMasahiro Yamada2016-06-24-9/+2
| | | | | | | | | | | | Use Kbuild standard style where possible. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | arm64: optimize smp_kick_all_cpusMasahiro Yamada2016-06-24-3/+1
| | | | | | | | | | | | | | | | gic_kick_secondary_cpus can directly return to the caller of smp_kick_all_cpus. We do not have to use x29 register here. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | omap3: bugfix in timer on rolloverDaniel Gorsulowski2016-06-24-1/+1
|/ | | | Signed-off-by: Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
* sunxi: Add PSCI implementation in CChen-Yu Tsai2016-06-20-504/+341
| | | | | | | | | | | | | | To make the PSCI backend more maintainable and easier to port to newer SoCs, rewrite the current PSCI implementation in C. Some inline assembly bits are required to access coprocessor registers. PSCI stack setup is the only part left completely in assembly. In theory this part could be split out of psci_arch_init into a separate common function, and psci_arch_init could be completely in C. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Add base address for GICChen-Yu Tsai2016-06-20-4/+4
| | | | | | | | | Instead of hardcoding the GIC addresses in the PSCI implementation, provide a base address in the cpu header. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Make CPUCFG_BASE macro names the same across familiesChen-Yu Tsai2016-06-20-12/+12
| | | | | | | | | Use SUNXI_CPUCFG_BASE across all families. This makes writing common PSCI code easier. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* ARM: allocate extra space for PSCI stack in secure section during link phaseChen-Yu Tsai2016-06-20-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | The PSCI implementation expects at most 2 pages worth of space reserved at the end of the secure section for its stacks. If PSCI is relocated to secure SRAM, then everything is fine. If no secure SRAM is available, and PSCI remains in main memory, the reserved memory space doesn't cover the space used by the stack. If one accesses PSCI after Linux has fully booted, the memory that should have been reserved for the PSCI stacks may have been used by the kernel or userspace, and would be corrupted. Observed after effects include the system hanging or telinit core dumping when trying to reboot. It seems the init process gets hit the most on my test bed. This fix allocates the space used by the PSCI stacks in the secure section by skipping pages in the linker script, but only when there is no secure SRAM, to avoid bloating the binary. This fix is only a stop gap. It would be better to rework the stack allocation mechanism, maybe with proper usage of CONFIG_ macros and an explicit symbol. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* ARM: PSCI: save and restore clobbered registers in v7_flush_dcache_allChen-Yu Tsai2016-06-20-0/+2
| | | | | | Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
generated by cgit v1.1 at 2024-10-07 22:20:36 +0000