summaryrefslogtreecommitdiff
path: root/arch/arm/cpu
Commit message (Collapse)AuthorAgeLines
* MLK-11408-1 imx: mx7d: Add mx7d RDC driver supportYe.Li2015-08-25-0/+6
| | | | | | | Add the peripherals/masters definitions and registers base addresses for mx7d RDC. Enable the RDC driver by setting CONFIG_MXC_RDC. Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-10957: ARM: mx6qp: do not turn off PURobin Gong2015-07-31-1/+2
| | | | | | | | | There is narrow window that PRE driver is ready but GPU driver probe later, and the later GPU driver turn on PU may cause 'PRE hang' issue. To simplify thing, do not turn off PU in u-boot. Signed-off-by: Robin Gong <b38343@freescale.com> (cherry picked from commit 6b0787b726e2ff32210d742d93ecd3f4bb2ae402)
* MLK-11228-2 android: Add fastboot command "reboot-bootloader" supportYe.Li2015-07-13-0/+12
| | | | | | | | | enable fastboot command: "fastboot reboot-bootloader" After type this command, the board will reboot to bootloader mode. Set ANDROID_FASTBOOT_BOOT flag in SNVS_LPGPR before reboot. Signed-off-by: Zhang Sanshan <b51434@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-11228-1 android: Integrate community fastboot with FSL i.MX fastbootYe.Li2015-07-13-75/+6
| | | | | | | | | | | | | | | | | | | | | 1. Replace the UDC driver with community's USB gadget d_dnl driver. 2. Integrate the FSL SD/SATA/NAND flash operations, since the GPT and EFI partitions are not support by i.MX. 3. Add FDT support to community's android image. 4. Change the booti command to boota, due to the booti has been used for ARM64 image boot. 5. Modify boota implementation to load ramdisk and fdt to their loading addresses specified in boot.img header, while bootm won't do it for android image. 6. Modify the android image HAB implementation. Authenticate the boot.img on the "load_addr" for both SD and NAND. 7. Enable new configuration CONFIG_FSL_FASTBOOT for Freescale's fastboot with relevant header file "fsl_fastboot.h". While disabling the configuration, the community fastboot is used. 8. Use community's way to combine cmdline in boot.img and u-boot environment, not overwrite the cmdline in boot.img Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-11201 mx7: clock: Fix PLL divider for the 100MHz caseFabio Estevam2015-06-29-1/+1
| | | | | | | We should divide the 1000MHz ENET PLL clock by 10 in order to achieve 100MHz, so fix the divider accordingly. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* MLK-11159-2 Revert "MLK-11028 imx: mx6qp change L2 prefetch offset to 0"Robby Cai2015-06-24-1/+1
| | | | | | | | | | | | This reverts commit 2bc93d766dee5d5dc33035446f82622c4f1fb784. After further investigation, find L2 prefetch offset setting of 0xF is not the root cause for USB stress reboot failure. With the fix in USB driver, and L2 prefetch offset setting of 0xF, the reboot stress test has passed 4-days both on imx6q and imx6qp sabreauto board. Signed-off-by: Robby Cai <r63905@freescale.com> (cherry picked from commit 6e9282c2567b2820699fa55d2c6bf0ab78e992d6)
* MLK-11101 imx: mx6: Move the set_wdog_reset out of CONFIG_LDO_BYPASS_CHECKYe.Li2015-06-12-22/+22
| | | | | | | | Since the 6ul does not enable the CONFIG_LDO_BYPASS_CHECK, but have to use the set_wdog_reset function. Need to move the funciton out of CONFIG_LDO_BYPASS_CHECK to resolve build issue. Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-11028 imx: mx6qp change L2 prefetch offset to 0Peng Fan2015-06-12-1/+1
| | | | | | Change L2 prefetch offset to 0 to make system stable. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-11064 imx: mx6qp: Adjust AQos settings for peripheralsYe.Li2015-06-08-0/+3
| | | | | | | | | To resolve USB camera bandwidth issue, the patch sets recommended AQoS setting from IC team value for peripheral and only on imx6qp. The address is: 0xbb0608, the value is: 0x80000201 Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-11050 ARM: imx6: configure the PMIC_STBY_REQ pin as open drainBai Ping2015-06-05-0/+9
| | | | | | | Configure the PMIC_STBY_REQ pin as open drain 100K according to the design team's requirement for the PMIC_STBY_REQ pin. Signed-off-by: Bai Ping <b51503@freescale.com>
* MLK-10958 imx: mx6ul support Bus Encryption EnginePeng Fan2015-05-25-1/+457
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is to support Bus Encryption Engine(BEE) for i.MX 6UL. Supported feature: 1. SNVS key and soft key 2. CTR and ECB mode 3. Specify address region to bee. Two commands are included: bee init [key] [mode] [start] [end] - BEE block initial "Example: bee init 1 1 0x80000000 0x80010000\n" bee test [region] "Example: bee test 1\n" Mapping: [0x10000000 - (0x10000000 + size - 1)] : [start - (start + size - 1)] [0x30000000 - (0x30000000 + IRAM_SIZE - 1)] : [IRAM_BASE_ADDR - (IRAM_BASE_ADDR + IRAM_SIZE - 1)] Whatever start is, start - (start + size -1) will be fixed mapping to 0x10000000 - (0x10000000 + size - 1) Since default AES region's protected size is SZ_512M, so on mx6ul evk board, you can not simply run 'bee init', it will overlap with uboot execution environment, you can use 'bee init 0 0 0x80000000 0x81000000'. If want to use bee, Need to define CONFIG_CMD_BEE in board configuration header file, since CONFIG_CMD_BEE default is not enabled. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10546-2 imx: mx7 implement reset_miscPeng Fan2015-05-22-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | On mx7d 12x12 lpddr3 arm2 board, POR_B reset in uboot will fail stress reset test, and hangs in rom code. Rom log buffer show thats wrong hab_image_entry and runs into serial download mode. Also there is no time delay reset circuit for this board. We found when disable CONFIG_VIDEO, all seems fine. Actually, only the following piece of code can make stress reset ok, " writel(LCDIF_CTRL1_VSYNC_EDGE_IRQ, &regs->hw_lcdif_ctrl1_clr); while (--timeout) { if (readl(&regs->hw_lcdif_ctrl1) & LCDIF_CTRL1_VSYNC_EDGE_IRQ) break; udelay(1); } " Here we use lcdif_power_down API which is better to shutdown lcdif same as the way used in arch_preboot_os. Implement reset_misc for mx7, since it does not hurt for others boards. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10936 imx: mx7d: Change to use bootrom_sw_info for getting boot deviceimx_3.14.38_6ul_engrYe.Li2015-05-20-19/+17
| | | | | | | | | | | | | | | | | | | | | On MX7D, boot rom can provide some boot information such as boot device, arm freq, axi freq, etc. (see the structure below) Offset Byte4 | Byte3 | Byte2 | Byte1 0x0 Reserved | Boot Device Type | Boot Device Instance | Reserved 0x4 ARM core frequency(in Hz) 0x8 AXI bus frequency(in Hz) 0x0C DDR frequency(in Hz) 0x10 GPT1 input clock frequency(in Hz) 0x14 Reserved 0x18 0x1C The boot information can be accessed by get the pointer at 0x1E8. This patch changes the u-boot to use the new approach. When manufacture boot, the info recorded is the actual SD port, not the failed device. Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-10884 imx: MX6SX: Fix IOMUXC GPR registers access issueYe.Li2015-05-13-2/+2
| | | | | | | | The iomuxc structure has changed to add 0x4000 offset for i.MX6SX and UL, so when using this structure to access gpr registers needs to change the base address to IOMUXC_BASE_ADDR. Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-10870 imx: mx7d: Implement to get board serial numberYe.Li2015-05-11-1/+7
| | | | | | Get the Unique ID of the chip from the fuse TESTER0 and TESTER1. Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-10829-1 imx:mx6sx correct i2c and video clock settingsPeng Fan2015-05-06-11/+1
| | | | | | | | Change MXC_CCM_CCGR6_I2C4_xx to MXC_CCM_CCGR6_I2C4_SERIAL_xx Remove duplicated mxs_set_vadcclk Correct enable_pll_video usage Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10812-2 imx:mx6ul add clock supportPeng Fan2015-05-05-18/+152
| | | | | | | | | | | | add i.MX6UL clock related settings/macros/apis When using TFT43AB, its pixel size is 480x272 which needs a slow pix clock. Without apply the test_div in PLL video, we can't get the pix clock in the rate. So change the LCDIF clock calculation to use the test_div. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-10812-1 imx:mx6 add i2c4 supportPeng Fan2015-05-05-6/+23
| | | | | | I2C4 support for i.MX Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10808-5 imx: mx6ul: Update soc relevant settingsYe.Li2015-05-05-8/+22
| | | | | | | Remove PCIe, xPU power, PL310 L2 Cache for MX6UL. Update FEC MAC address, WDOG settings, USDHC clock rate. Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-10808-4 imx: Move system counter driver to imx-commonYe.Li2015-05-04-127/+1
| | | | | | | | | | | | | Since the system counter driver will also be used by mx6ul, move this timer driver to imx-common and rename it as syscounter.c For mx6ul and mx7, configurations are used for choose the GPT timer or system counter timer (default). GPT timer: CONFIG_GPT_TIMER System counter timer: CONFIG_SYSCOUNTER_TIMER Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-10708 imx:mx6qp Update Saturation THR for PRExPeng Fan2015-04-29-4/+4
| | | | | | | | Update settings for PRE. Value for Saturation THR of PREx, changed from 0x20 to 0x10 to make system more stable. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> (cherry picked from commit 02e7090604e55d9690532294b02b499609d46e63)
* MLK-10702 imx: mx7d: clock: correct fec MDC root clockFugang Duan2015-04-29-1/+1
| | | | | | | | In i.MX7d platform, fec MDC root clock is ENET_AXI_ROOT_CLK, not ipg clock, correct it. Signed-off-by: Fugang Duan <B38611@freescale.com> (cherry picked from commit 07105e18dd0899c47ef80d3fddecf3ef250d895a)
* MLK-10774-48 imx: mx7 update hab_caam_clock_enablePeng Fan2015-04-29-9/+7
| | | | | | | Merge hab_caam_clock_enable and hab_caam_clock_disable into one function Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00329484-2 ARM:MX6: Clear Align bit in SCTLRPeng Fan2015-04-29-0/+3
| | | | | | | | | | | This problem is found when debugging QuadSPI. When "A" bit is enabled, unaligned access will cause data abort exception. Actually, we do not want this exception. So clear the align bit for MX6 SOCs. Tested this code with android team colleague and did not find problem. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> (cherry picked from commit aa76a7e472e34bc59554f9932d611b1047d24590)
* MLK-10674-2 imx: mx6qp settings for PREPeng Fan2015-04-29-0/+38
| | | | | | | | | | | | | | | | | | | | | | Since the following piece settings can not be in DCD table, we add them in enable_ipu_clock. " setmem /32 0x00bb048c = 0x00000002 ## Bypass IPU1 QoS generator setmem /32 0x00bb050c = 0x00000002 ## Bypass IPU2 QoS generator setmem /32 0x00bb0690 = 0x00000200 ## Bandwidth THR for of PRE0 setmem /32 0x00bb0710 = 0x00000200 ## Bandwidth THR for of PRE1 setmem /32 0x00bb0790 = 0x00000200 ## Bandwidth THR for of PRE2 setmem /32 0x00bb0810 = 0x00000200 ## Bandwidth THR for of PRE3 setmem /32 0x00bb0694 = 0x00000020 ## Saturation THR for of PRE0 setmem /32 0x00bb0714 = 0x00000020 ## Saturation THR for of PRE1 setmem /32 0x00bb0794 = 0x00000020 ## Saturation THR for of PRE2 setmem /32 0x00bb0814 = 0x00000020 ## Saturation THR for of PRE " CONFIG_VIDEO_IPUV3 is always defined in mx6sabre_common.h, the settings sure will effect. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> (cherry picked from commit 61cec88a59ebf450dd1352d81e03b5aa842e1d71)
* MLK-10774-46 imx:mx6sx use correct GPR addressPeng Fan2015-04-29-1/+1
| | | | | | Use correct GPR address. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10569 imx7d: call set_epdc_qos unconditionallyRobby Cai2015-04-29-4/+1
| | | | | | | | | This EPDC/EPXP QoS setting is needed for EPDC stress test to pass. This patch remove the #ifdef to make sure set_epdc_qos be called always. Signed-off-by: Robby Cai <r63905@freescale.com> (cherry picked from commit d2fb113740b2c67958862503dda2a40191ab0899) (cherry picked from commit 581aa86581bb1178c5df4ad5298e5b85c53f1186)
* MLK-10524: iMX6x: Implement workaround for Cortex-A9 errata 845369Nitin Garg2015-04-29-0/+5
| | | | | | | | | | Under very rare timing circumstances, transitioning into streaming mode might create a data corruption. Present on Two or more processors or 1 core with ACP, all revisions. This erratum can be worked round by setting bit[22] of the undocumented Diagnostic Control Register to 1. Signed-off-by: Nitin Garg <nitin.garg@freescale.com> (cherry picked from commit 70ad44e523680de67dd8b7a7505d7f27799980ee)
* MLK-10513 mx7: HAB: Fix HAB RVT addresses to unified sectionYe.Li2015-04-29-5/+5
| | | | | | | | Incorrect hab_rvt addresses were used for getting HAB functions. Need to change to addresses in unified section. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 5ae1cb9d8e7cd7babd1d7ef7f2303664a4e15c26)
* MLK-10496: Check the PL310 version for applying errataNitin Garg2015-04-29-11/+10
| | | | | | | | | | | | Apply errata based on PL310 version instead of compile time. Also set Prefetch offset to 15, since it improves memcpy performance by 35%. Don't enable Incr double Linefill enable since it adversely affects memcpy performance by about 32MB/s and reads by 90MB/s. Tested with 4K to 16MB sized src and dst aligned buffer. Signed-off-by: Nitin Garg <nitin.garg@freescale.com> (cherry picked from commit 31751fa9cf29ef4056f49fe06a54700a89c9bdc5)
* MLK-10492-1 imx: mx7d: Update LCDIF clock settingsYe.Li2015-04-29-7/+54
| | | | | | | | | To support lower clock frequency, needs to set post divider and test divider in PLL_VIDEO. So update LCDIF clock settings function to support this feature. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit b4d3b2a8eaf1ad1dc529ae2348d1646a2833b701)
* MLK-10477-2 imx: mx7d: Add EPDC clock init and base addressYe.Li2015-04-29-0/+33
| | | | | | | Ungate the EPDC clock at system up if the EPDC is enabled Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit f215632cb25d1076ab5c5465efdfad2212010d8d)
* MLK-10477-1 imx: mx7d: Add QoS settings for EPDCYe.Li2015-04-29-0/+34
| | | | | | | Add the QoS settings function which is used for EPDC Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 725a3bbbe0a172a0f4619d99bc198b9367b9fc5d)
* MLK-10448-5 imx: mx6qp: Enable PRG clock for IPUYe.Li2015-04-29-0/+6
| | | | | | | | | | The i.MX6QP has a PRG module, need to enable its clock for using IPU. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Brown Oliver <B37094@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 089f399ea07db79d6bca8fdc08b442b59eb55feb)
* MLK-10448-4 mx6: hab : Remove the cache issue workaroud in hab for i.MX6QPYe.Li2015-04-29-1/+2
| | | | | | | | | | | Since the i.MX6QP has fixed the issue in boot ROM, so remove the workaround for i.MX6QP. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 96e13b57ead3ed00c3a32c5373c7a2a876947f99) Conflicts: arch/arm/cpu/armv7/mx6/hab.c
* MLK-10448-3 mx6: ccm: Change the clock settings for i.MX6QPYe.Li2015-04-29-6/+14
| | | | | | | | | | | | | | | | Since i.MX6QP changes some CCM registers, so modify the clocks settings to follow the hardware changes. A new CONFIG_MX6QP is introduced here and is used for the CCM difference. At default CONFIG_MX6Q is enabled along with the CONFIG_MX6QP. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 5e4d1537ce9a476c8404126350f05d8976c5aa35) Conflicts: arch/arm/cpu/armv7/mx6/clock.c arch/arm/include/asm/arch-mx6/crm_regs.h include/configs/mx6_common.h
* MLK-10448-2 mx6: L2cache: Enable the double line fill for i.MX6DQPYe.Li2015-04-29-0/+3
| | | | | | | | Since i.MX6DQP has fixed the L2 cache issue, enable the double line fill feature to provide better performance. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit aa8a38edb67d4d1375d10bee9bf46557369fb5c4)
* MLK-10448-1 mx6: Add MX6DQP CPU rev typeYe.Li2015-04-29-1/+3
| | | | | | | | | Add new cpu type for i.MX6DQP and providing a dynamical detecting function. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit ccf3b130d71cf3dd9a97d3bb424931bf6bd7e8c0)
* MLK-10385-3 imx: mx7: Enable rawnand clock at init for APBH-DMAYe.Li2015-04-29-0/+4
| | | | | | | | For APBH-DMA enabled case, we have to enable rawnand clock for mxs_dma_init. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 42f42939bbd8161ce283a6af326d0f313cc4c36c) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10363-1 udc: Update i.MX udc driver to support MX7Ye.Li2015-04-29-24/+2
| | | | | | | | | Update driver codes and registers define for MX7. Implement udc callback function in MX7 arch. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit e55c4f7bf5a66b34c2d01c42bac667cb3789b0c1) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10774-33 imx:mx6 add udc and fastboot supportPeng Fan2015-04-29-0/+103
| | | | | | | | | | | | Add udc and fastboot support We did not use the upstream way. Currently use CI_UDC and USB_GAGDET of upstream can make fastboot work, but lack of flash operation, so we still use our way. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Nitin Garg <nitin.garg@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-10774-30 imx:mx7 dm thermal driver supportPeng Fan2015-04-29-109/+19
| | | | | | Add thermal driver for mx7 Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10774-29 imx:thermal change from CONFIG_IMX6_THERMAL to CONFIG_IMX_THERMALPeng Fan2015-04-29-1/+1
| | | | | | Change macro name to make driver support more platforms. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10774-26 arm:armv7 add imx7Peng Fan2015-04-29-0/+1
| | | | | | Modify Makefile to support MX7 Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10363-2 imx: mx7: Enable SNVS clockYe.Li2015-04-29-0/+2
| | | | | | | | Enable SNVS clock in clock_init function as default enabled clock. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit df1e45b3098f737d68517c51032472d12fd87666) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10361 imx: mx7d arm2: Change to use WDOG_B resetYe.Li2015-04-29-3/+21
| | | | | | | | | | | | | | | | | | | | | The default u-boot reset is a internal WDOG reset (warm reset on i.MX6) which does not have power and DDR reset. So the peripherals and DDR may meet problem. When using the internal WDOG reset on i.MX7D ARM2 boards, we meets two DDR issues: 1. On 12x12 ARM2, sometimes the system may hang in DCD because the DDRC Operating Mode does not become to normal. 2. On 19x19 ARM2, the reset always brings system to USB download because the DDR3 turns to unstable. On the i.MX7D ARM2 board, the WDOG_B signal connects to POR_B or PMIC_PWRON. This gives a chance to use a stronger reset. So in this patch, we set the IOMUX for WDOG_B pin and enable WDOG_B signal output in WDOG WCR register. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 1192501c1fcf3b266eb22639a6bc93ac7c03b367) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10200 imx: mx7: Add M4 booting supportYe.Li2015-04-29-2/+17
| | | | | | | | Implement the auxiliary core booting for Cortex M4 on i.MX7 Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit c1c8ba37d87493c16ec1a12bc36d47f909e0e733) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10176-8 imx: mx7: add HAB security supportYe.Li2015-04-29-0/+278
| | | | | | | | Add HAB files for secure boot and image athentication. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 2447bbcdd4ffcbdbd4ebed1b25e67ea753332d9d) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10176-7 imx: mx7: add system counter supportYe.Li2015-04-29-1/+127
| | | | | | | | | | Generic timer is added to mx7d, so add support for this. In uboot, only system counter is needed, the timer events are not needed. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 514a79581c6a46df445d69f1fcb2b3bff9584162) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10176-4 imx: mx7: Add arch level supportYe.Li2015-04-29-2/+505
| | | | | | | | | | | | | | | | | | | Introduce a new cpu type MXC_CPU_MX7D and relevant functions for mx7d. Implement the soc.c for various system level functions like: temperature check, arch init, get mac fuse, boot mode get/apply, etc. Additional, enable building imx common platform files for mx7d. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 47d65aa6bdd109fd9141b5a5d64ab9deeb9dd2b3) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Conflicts: Makefile arch/arm/cpu/armv7/Makefile arch/arm/imx-common/cpu.c arch/arm/include/asm/arch-imx/cpu.h arch/arm/include/asm/imx-common/boot_mode.h
generated by cgit v1.1 at 2024-11-19 10:50:01 +0000