summaryrefslogtreecommitdiff
path: root/arch/arm/cpu
Commit message (Collapse)AuthorAgeLines
...
| * armv8/fsl-layerscape: print SoC revsion numberWenbin Song2016-10-06-0/+3
| | | | | | | | | | | | | | | | The exact SoC revsion number can be recognized from U-Boot log. Signed-off-by: Wenbin Song <wenbin.song@nxp.com> Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv7: LS1021a: enable i-cache in start.SXiaoliang Yang2016-10-06-1/+5
| | | | | | | | | | | | | | | | | | | | Delete CONFIG_SKIP_LOWLEVEL_INIT define in ls1021atwr.h and ls1021aqds.h can let it run cpu_init_cp15 to enable i-cache. First stage of u-boot can run faster after that. There is a description about skip lowlevel init in board/freescale/ls1021atwr/README. Signed-off-by: Xiaoliang Yang <xiaoliang.yang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: fsl-lsch2: enable snoopable sata read and writeTang Yuantian2016-10-06-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | By default the SATA IP on the ls1043a/ls1046a SoCs does not generating coherent/snoopable transactions. This patch enable it in the SCFG_SNPCNFGCR register along with sata axicc register. In addition, the dma-coherent property must be set on the SATA controller nodes. Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com> [York Sun: Reformatted commit message] Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: fsl-lsch2: adjust sata parameterTang Yuantian2016-10-06-2/+0
| | | | | | | | | | | | | | | | The default values for Port Phy2Cfg register and Port Phy3Cfg register are better, no need to overwrite them. Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2016-10-08-35/+99
|\ \
| * | ARM: vf610: use strcpy for soc environment variableStefan Agner2016-10-07-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To create the soc environment variable we concatenate two strings on the stack. So far, strcat has been used for the first string as well as for the second string. Since the variable on the stack is not initialized, the first strcat may not start using the first entry in the character array. This then could lead to an buffer overflow on the stack. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
| * | tools: mkimage: add support for Vybrid image formatAlbert ARIBAUD \(3ADEV\)2016-10-06-0/+5
| | | | | | | | | | | | | | | | | | | | | This format can be flashed directly at address 0 of the NAND FLASH, as it contains all necessary headers. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
| * | imx: imx6ul: disable POR_B internal pull upPeng Fan2016-10-04-8/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | >From TO1.1, SNVS adds internal pull up control for POR_B, the register filed is GPBIT[1:0], after system boot up, it can be set to 2b'01 to disable internal pull up. It can save about 30uA power in SNVS mode. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
| * | imx: mx6: fix USB bmode to use reserved valueStefan Agner2016-10-04-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the bmode "usb" uses BOOT_CFG1 to 0x01, -which means BOOT_CFG1[7:4] is set to b0000. According to Table 8-7 Boot Device Selection this is NOR/OneNAND and not Reserved. Use 0x10 which leads to b0001, which is a Reserved boot device. With that the SoC reliably falls back to the serial loader. Cc: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Tested-by: Troy Kisky <troy.kisky@boundarydevices.com>
| * | arm: imx: add i.MX6ULL 14x14 EVK board supportPeng Fan2016-10-04-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add i.MX6ULL EVK board support: Add device tree file, which is copied from NXP Linux. Enabled DM_MMC, DM_GPIO, DM_I2C, DM_SPI, PINCTRL, DM_REGULATOR. The uart iomux settings are still keeped in board file. Boot Log: U-Boot 2016.09-rc1-00366-gbb419ef-dirty (Aug 11 2016 - 13:08:58 +0800) CPU: Freescale i.MX6ULL rev1.0 at 396MHz CPU: Commercial temperature grade (0C to 95C) at 15C Reset cause: POR Model: Freescale i.MX6 ULL 14x14 EVK Board Board: MX6ULL 14x14 EVK DRAM: 512 MiB MMC: initialized IMX pinctrl driver FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 0 => mmc dev 1 switch to partitions #0, OK mmc1 is current device Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
| * | imx: imx6ull: adjust the ldo 1.2v bandgap voltagePeng Fan2016-10-04-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Per to design team, on i.MX6UL, the LDO 1.2V bandgap voltage is 30mV higher, so we need to adjust the REFTOP_VBGADJ(anatop MISC0 bit[6:4]) setting to 2b'110. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Bai Ping <ping.bai@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
| * | imx: mx6ull: update clock settings and CCM register mapPeng Fan2016-10-04-22/+37
| | | | | | | | | | | | | | | | | | | | | | | | Update Clock settings and CCM register map for i.MX6ULL. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
| * | imx: mx6ull: adjust POR_B setting for i.MX6ULLPeng Fan2016-10-04-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adjust POR_B settings on i.MX6ULL according to IC design team's suggestion: 2'b00 : always PUP100K 2'b01 : PUP100K when PMIC_ON_REQ || SOC_NOT_FAIL 2'b10 : always disable PUP100K 2'b11 : PDN100K when SOC_FAIL, PUP100K when SOC_NOT_FAIL -- recommended setting Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
| * | imx: mx6ull: misc soc updatePeng Fan2016-10-04-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update misc SOC related settings for i.MX6ULL, such as FEC mac address, cpu speed grading and mmdc channel mask clearing. Also update s_init to skip pfd reset. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
| * | imx: mx6ul: using runtime check when configuring PMIC_STBY_REQPeng Fan2016-10-04-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Since MX6ULL select MX6UL, we can not use IS_ENABLED(CONFIG_MX6UL) here, because this piece code is only for i.MX6UL. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
| * | imx: mx6ull: skip setting ahb clockPeng Fan2016-10-04-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Rom already initialized clock at 396M and 132M for arm core and ahb, so skip setting them again in U-Boot. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
| * | imx: mx6ull: add kconfig entry for MX6ULLYe Li2016-10-04-0/+4
| |/ | | | | | | | | | | | | | | | | i.MX6ULL is derivative from i.MX6UL, so select MX6UL for MX6ULL. If need to differenate MX6ULL from MX6UL, use CONFIG_MX6ULL Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* | ARM: AM437X: Add Silicon ID supportLokesh Vutla2016-10-08-1/+4
| | | | | | | | | | | | | | | | | | | | Add silicon ID code for AM437x silicon. This can be used to print the cpu info using CONFIG_DISPLAY_CPUINFO. Also printing "CPU :" along with cpu name in order to be consistent with other OMAP platforms. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | ARM: OMAP5+: Override switch_to_hypervisor functionKeerthy2016-10-06-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | Override the switch_to_hypervisor function to switch cpu to hypervisor mode using the available ROM code hook early in the boot phase before the boot loader checks for HYP mode. Based on the work done by Jonathan Bergsagel jbergsagel@ti.com. Cc: beagleboard-x15@googlegroups.com Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | ARM: Introduce function to switch to hypervisor modeKeerthy2016-10-06-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | On some of the SoCs one cannot enable hypervisor mode directly from the u-boot because the ROM code puts the chip to supervisor mode after it jumps to boot loader. Hence introduce a weak function which can be overridden based on the SoC type and switch to hypervisor mode in a custom way. Cc: beagleboard-x15@googlegroups.com Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | omap: Set appropriate cache configuration for LPAE and non-LAPE casesKeerthy2016-10-06-2/+23
| | | | | | | | | | | | | | | | | | | | | | | | Cache configuration methods is different for LPAE and non-LPAE cases. Hence the bits and the interpretaion is different for two cases. In case of non-LPAE mode short descriptor format is used and we need to set Cache and Buffer bits. In the case of LPAE the cache configuration happens via MAIR0 lookup. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | omap: Remove hardcoding of mmu section shift to 20Keerthy2016-10-06-2/+2
| | | | | | | | | | | | | | | | | | As of now the mmu section shift is hardcoded to 20 but with LPAE coming into picture this can be different. Hence replacing 20 with MMU_SECTION_SHIFT macro. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | ARMv8/sec-firmware: fix a compile errorHou Zhiqiang2016-10-06-6/+16
| | | | | | | | | | | | | | | | | | When enabled sec firmware framework, but lack of definition of the marco SEC_FIRMWARE_FIT_IMAGE, SEC_FIRMEWARE_FIT_CNF_NAME and SEC_FIRMWARE_TARGET_EL, there will be some build errors, so give a default definition. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
* | ARM: Respect CONFIG_SPL_STACK define in lowlevel_init.SSiarhei Siamashka2016-10-06-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SPL and U-Boot proper may use different initial stack locations, which are configured via CONFIG_SPL_STACK and CONFIG_SYS_INIT_SP_ADDR defines. The lowlevel_init.S code needs to handle this in the same way as crt0.S Without this fix, setting the U-Boot stack location to some place, which is not safely accessible by the SPL (such as the DRAM), causes a very early SPL deadlock. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | spl: Kconfig: Move SPL_DISPLAY_PRINT to KconfigSimon Glass2016-10-06-0/+6
|/ | | | | | | | Move this option to Kconfig and tidy up existing uses. Also add a function comment to the header file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* ti: omap-common: Allow AM33xx devices to be built securelyAndrew F. Davis2016-10-02-1/+1
| | | | | | | | | | Like OMAP54xx and AM43xx family SoCs, AM33xx based SoCs have high security enabled models. Allow AM33xx devices to be built with HS Device Type Support. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com>
* am33xx: config.mk: Fix option used to enable SPI SPL image typeAndrew F. Davis2016-10-02-2/+2
| | | | | | | | | | | | | The option SPL_SPI_SUPPORT is used to enable support in SPL for loading images from SPI flash, it should not be used to determine the build type of the SPL image itself. The ability to read images from SPI flash does not imply the SPL will be booted from SPI flash. Unconditionally build SPI flash compatible SPL images. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* am33xx: config.mk: Add support for additional secure boot image typesAndrew F. Davis2016-10-02-2/+18
| | | | | | | | | | | | | | Depending on the boot media, different images are needed for secure devices. The build generates u-boot*_HS_* files as appropriate for the different boot modes. For AM33xx devices additional image types are needed for various SPL boot modes as the ROM checks for the name of the boot mode in the file it loads. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com>
* Kconfig: Separate AM33XX SOC config from target board configAndrew F. Davis2016-10-02-0/+87
| | | | | | | | | | | | | | | | The config option AM33XX is used in several boards and should be defined as a stand-alone option for this SOC. We break this out from target boards that use this SoC and common headers then enable AM33XX on in all the boards that used these targets to eliminate any functional change with this patch. This is similar to what has already been done in 9de852642cae ("arm: Kconfig: Add support for AM43xx SoC specific Kconfig") and is done for the same reasons. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ARM: omap5: add fdt secure dram reservation fixupDaniel Allred2016-10-02-2/+62
| | | | | | | | | | Adds a secure dram reservation fixup for secure devices, when a region in the emif has been set aside for secure world use. The size is defined by the CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE config option. Signed-off-by: Daniel Allred <d-allred@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ARM: DRA7: Add secure emif setup callsDaniel Allred2016-10-02-0/+15
| | | | | | | | | | | After EMIF DRAM is configured, but before it is used, calls are made on secure devices to reserve any configured memory region needed by the secure world and then to lock the EMIF firewall configuration. If any other firewall configuration needs to be applied, it must happen before the lock call. Signed-off-by: Daniel Allred <d-allred@ti.com>
* arm: omap5: secure API for EMIF memory reservationsDaniel Allred2016-10-02-0/+127
| | | | | | | | | | | Create a few public APIs which rely on secure world ROM/HAL APIs for their implementation. These are intended to be used to reserve a portion of the EMIF memory and configure hardware firewalls around that region to prevent public code from manipulating or interfering with that memory. Signed-off-by: Daniel Allred <d-allred@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ti: omap5: Add Kconfig options for secure EMIF reservationsDaniel Allred2016-10-02-0/+26
| | | | | | | | | | | | | Adds start address and size config options for setting aside a portion of the EMIF memory space for usage by security software (like a secure OS/TEE). There are two sizes, a total size and a protected size. The region is divided into protected (secure) and unprotected (public) regions, that are contiguous and start at the start address given. If the start address is zero, the intention is that the region will be automatically placed at the end of the available external DRAM space. Signed-off-by: Daniel Allred <d-allred@ti.com>
* dra7x: boot: add dfu bootmode supportB, Ravi2016-09-27-0/+5
| | | | | | | | This patch enables the DFU boot mode support for dra7x platform. Signed-off-by: Ravi Babu <ravibabu@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-09-26-26/+564
|\ | | | | | | | | | | | | trini: Drop local memset() from examples/standalone/mem_to_mem_idma2intr.c Signed-off-by: Tom Rini <trini@konsulko.com>
| * armv7: ls102xa: Rename GIC_ADDR and DCSR_RCPM_ADDRYork Sun2016-09-26-2/+2
| | | | | | | | | | | | | | | | | | Instead of using CONFIG_* name space, rename these two macros to SYS_FSL_* space. Signed-off-by: York Sun <york.sun@nxp.com> CC: Hongbo Zhang <hongbo.zhang@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * armv7: ls1021a: Convert CONFIG_LS1_DEEP_SLEEP to Kconfig optionYork Sun2016-09-26-0/+3
| | | | | | | | | | | | | | | | Move this option to Kconfig and clean up existing uses. Signed-off-by: York Sun <york.sun@nxp.com> CC: Hongbo Zhang <hongbo.zhang@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * Convert CONFIG_SYS_FSL_ERRATUM_A010315 to Kconfig optionYork Sun2016-09-26-0/+11
| | | | | | | | | | | | | | Move this option to Kconfig and clean up existing uses. Signed-off-by: York Sun <york.sun@nxp.com> CC: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
| * armv8: ls1012a: Convert CONFIG_LS1012A to Kconfig option ARCH_LS1021AYork Sun2016-09-26-3/+10
| | | | | | | | | | | | | | | | | | Move this config to Kconfig option and clean up existing uses. Signed-off-by: York Sun <york.sun@nxp.com> CC: Calvin Johnson <calvin.johnson@nxp.com> CC: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * armv8: ls1046a: Convert CONFIG_LS1046A to Kconfig option ARCH_LS1046AYork Sun2016-09-26-3/+5
| | | | | | | | | | | | | | | | | | Move this option to Kconfig and clean up existing uses. Signed-off-by: York Sun <york.sun@nxp.com> CC: Mingkai Hu <mingkai.hu@nxp.com> CC: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * armv8: ls1046a: disable SATA ECC in DCSRShaohui Xie2016-09-14-0/+4
| | | | | | | | | | | | | | | | | | This is a workaround to fix SATA CRC error. Once the root cause is found the ECC disabling will be removed. Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: fsl-layerscape: spl: remove BSS clearing and board_init_rQianyu Gong2016-09-14-5/+0
| | | | | | | | | | | | | | | | | | | | As per the top level U-Boot README "Board Initialisation Flow" section, board_init_f() should return without calling board_init_r() directly. Clearing BSS and calling board_init_r() will be done in crt0_64.S. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: fsl-layerscape: Increase L2 Data RAM latency and L2 Tag RAM latencyMingkai Hu2016-09-14-0/+15
| | | | | | | | | | | | | | | | | | | | | | According to design specification, the L2 cache operates at the same frequency as the A72 CPUs in the cluster with a 3-cycle latency, so increase the L2 Data RAM and Tag RAM latency to 3 cycles, or else, will run into different call trace issues. Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * nxp: ls102xa: add LS1 PSCI system suspendHongbo Zhang2016-09-14-1/+248
| | | | | | | | | | | | | | | | The deep sleep function of LS1 platform, is mapped into PSCI system suspend function, this patch adds implementation of it. Signed-off-by: Hongbo Zhang <hongbo.zhang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * nxp: ls102xa: add EPU Finite State MachineHongbo Zhang2016-09-14-0/+165
| | | | | | | | | | | | | | | | The EPU Finite State Machie (FSM) is used in both the last stage of system suspend and the earliest stage of system resume. Signed-off-by: Hongbo Zhang <hongbo.zhang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv7: psci: make v7_flush_dcache_all public for all psci codeHongbo Zhang2016-09-14-3/+3
| | | | | | | | | | | | | | | | | | | | | | The v7_flush_dcache_all function will be called by ls102xa platform system suspend, it is necessary to make it a public call instead of a local one, but changing the LENTRY to ENTRY isn't enough, because there is another one using the same name, so this one gets a psci_ prefix. Signed-off-by: Hongbo Zhang <hongbo.zhang@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls2080a: Remove debug server supportYork Sun2016-09-14-5/+0
| | | | | | | | | | | | Debug server feature has been dropped from roadmap. Signed-off-by: York Sun <york.sun@nxp.com>
| * fsl-layerscape: Add workaround for PCIe erratum A010315Hou Zhiqiang2016-09-14-0/+30
| | | | | | | | | | | | | | | | | | | | As the access to serders protocol unselected PCIe controller will hang. So disable the R/W permission to unselected PCIe controller including its CCSR, IO space and memory space according to the serders protocol field of RCW. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * arm: fsl-layerscape: move forward the non-secure access permission setupHou Zhiqiang2016-09-14-4/+10
| | | | | | | | | | | | | | | | | | | | Move forward the basic non-secure access enable operation, so the subsequent individual device access permission can override it. And collect the dispersed callers in board level, and then move them to SoC level. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * fsl: serdes: ensure accessing the initialized maps of serdes protocolHou Zhiqiang2016-09-14-2/+37
| | | | | | | | | | | | | | | | | | | | | | | | Up to now, the function is_serdes_configed() doesn't check if the map of serdes protocol is initialized before accessing it. The function is_serdes_configed() will get wrong result when it was called before the serdes protocol maps initialized. As the first element of the map isn't used for any device, so use it as the flag to indicate if the map has been initialized. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
generated by cgit v1.1 at 2024-09-12 21:36:13 +0000