summaryrefslogtreecommitdiff
path: root/arch/arm/cpu
Commit message (Collapse)AuthorAgeLines
* imx: mx7: default enable MDIO open drainPeng Fan2016-01-24-0/+20
| | | | | | | | | | The management data input/output (MDIO) requires open-drain, i.MX7D TO1.0 ENET MDIO pin has no open drain, but TO1.1 supports this feature. So to TO1.1, need to enable open drain by setting bits GPR0[8:7] for TO1.1. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* imx: mx6ul/sx: fix mmdc_ch0 clk calculationPeng Fan2016-01-24-4/+57
| | | | | | | | | | | | | Check "Figure 19-5. BUS clock generation" of i.MX 6SoloX Applications Processor Reference Manual and "Figure 18-5. BUS clock generation" of i.MX 6UltraLite Applications Processor Reference Manual. If mmdc clk sources from pll4_main_clk(pll_audio), the calculation is wrong. Fix mmdc_ch0 clk calculation. Also add PLL_AUDIO/VIDEO support for decode_pll. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* Merge git://git.denx.de/u-boot-dmTom Rini2016-01-21-0/+6
|\
| * arm: omap-common: do not build timer when CONFIG_TIMER definedMugunthan V N2016-01-20-0/+6
| | | | | | | | | | | | | | | | | | | | To prepare timer driver to DM/DT conversion do not build the exiting timer driver when CONFIG_TIMER is defined. But since omap's SPL doesn't support DM yet so built timer driver only for SPL build when CONFIG_TIMER is defined. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | sunxi: Add support for the I2C controller which is part of the PRCMJelle van der Waa2016-01-21-0/+22
|/ | | | | | | | | | | Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> [hdegoede@redhat.com: Minor cleanups] Signed-off-by: Hans de Goede <hdegoede@redhat.com> applied with fixing 2 checkpatch warnings: WARNING: please, no space before tabs Signed-off-by: Heiko Schocher <hs@denx.de>
* stm32: move stm32 specific code to mach-stm32Vikas Manocha2016-01-20-1085/+0
| | | | | | | This patch moves stm32 sources at one place, with this armv7m now contains only generic stuff. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
* armv7: Add missing newline after OMAP die IDLadislav Michl2016-01-20-2/+2
| | | | | Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Acked-by: Enric Balletbo Serra <enric.balletbo@collabora.com>
* armv8: Add Secure Monitor/Hypervisor Call (SMC/HVC) infrastructureSergey Temerkhanov2016-01-19-0/+76
| | | | | | | | | | | | | | | | | This commit adds functions issuing calls to secure monitor or hypervisore. This allows using services such as Power State Coordination Interface (PSCI) provided by firmware, e.g. ARM Trusted Firmware (ATF) The SMC call can destroy all registers declared temporary by the calling conventions. The clobber list is "x0..x17" because of this Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
* armv8: New MMU setup code allowing to use 48+ bits PA/VASergey Temerkhanov2016-01-19-0/+113
| | | | | | | | | | | | | This patch adds code which sets up 2-level page tables on ARM64 thus extending available VA space. CPUs implementing 64k translation granule are able to use direct PA-VA mapping of the whole 48 bit address space. It also adds the ability to reset the SCTRL register at the very beginning of execution to avoid interference from stale mappings set up by early firmware/loaders/etc. Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>
* arm: lpc32xx: switch SPL builds to driver modelVladimir Zapolskiy2016-01-13-1/+1
| | | | | | | | | | | | | | | | For NXP LPC32xx boards the change enables SPL_DM option, this allows to use any driver model UART driver in SPL images, hence a restriction on HSUART in SPL image is removed and well as definitions for non-DM NS16550 driver, its DM version is used instead. Because SPL_DM requires malloc(), enable CONFIG_SPL_SYS_MALLOC_SIMPLE for LPC32xx boards. The change adds about 5KB to the resulting SPL image (for devkit3250 board SPL image is increased from 10672 to 15608 bytes). Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* arm: lpc32xx: switch serial console to driver modelVladimir Zapolskiy2016-01-13-2/+35
| | | | | | | | | | | | | | | | | On NXP LPC32xx platform for non-SPL builds the change adds standard (NS16550) and high-speed UARTs to driver model. Due to specific of DM NS16550 device description UART clock can not be got in runtime and by default it is set to 13MHz, if board PERIPH_CLK is different, this should be specified in board configuration file. For SPL builds HSUARTs are disabled and non-DM NS16550 driver is compiled, if needed. The change also updates default configs of devkit3250 and work_92105 boards to reflect updates in platform files. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* am33xx/am43xx: Add platform data for GPIOsTom Rini2016-01-08-0/+23
| | | | | | | | | | | | | On these platforms we have many cases of boards that enable device model and GPIO support but do not enable OF_CONTROL and pass in a device tree with the binary. We need to bring in the platform data here as well. Tested on Beaglebone Black. Reported-by: Robert Nelson <robertcnelson@gmail.com> Reported-by: Francisco Aguerre <franciscoaguerre@gmail.com> Reported-by: Jason Kridner <jkridner@beagleboard.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2016-01-03-1/+36
|\
| * ARM: mxs: allow boards to select DC-DC switching clock sourceMichael Heimpold2016-01-03-0/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For some board designs, it might be useful to switch the DC-DC clock source to something else rather the default 24 MHz, e.g. for EMI reasons. For this, override the mxs_power_setup_dcdc_clocksource function in your board support files. Example: void mxs_power_setup_dcdc_clocksource(void) { mxs_power_switch_dcdc_clocksource(POWER_MISC_FREQSEL_20MHZ); } Signed-off-by: Michael Heimpold <mhei@heimpold.de> Cc: Marek Vasut <marex@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de>
| * imx: ddr: drop duplicated debug infoPeng Fan2016-01-03-1/+0
| | | | | | | | | | | | | | Drop duplicated debug info for tcl. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
| * imx: mx6: add missing return valueJeroen Hofstee2015-12-07-0/+2
| | | | | | | | | | | | | | cc: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl> Reviewed-by: Peng Fan <Peng.Fan@freescale.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
* | armv8/ls1043a: Implement workaround for PEX erratum A009929Mingkai Hu2015-12-17-0/+16
| | | | | | | | | | | | | | | | | | Consecutive write transactions from core to PCI express outbound path hangs after 25 to 30 transactions depending on core freq. This erratum enable the mbist clock through COP register setting. Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2015-12-14-16/+325
|\ \
| * | armv8: Add sata support on Layerscape ARMv8 boardTang Yuantian2015-12-15-0/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Freescale ARM-based Layerscape contains a SATA controller which comply with the serial ATA 3.0 specification and the AHCI 1.3 specification. This patch adds SATA feature on ls2080aqds, ls2080ardb and ls1043aqds boards. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | armv8: Make SEC read/write as snoopable for LS1043Aneesh Bansal2015-12-15-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | For LS1043, SEC read/writes are made snoopable by setting the corresponding bits in SCFG to avoid coherency issues. Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | armv8: define usec2ticks functionAneesh Bansal2015-12-15-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | usec2ticks() function has been defined for ARMv8 which will be used by SEC Driver. Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | armv8: fsl-layerscale: Rewrite reserving memory for MC and debug serverYork Sun2015-12-15-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MC and debug server are not board-specific. Move reserving memory to SoC file, using the new board_reserve_ram_top function. Reduce debug server memory by 2MB to make room for secure memory. In the system with MC and debug server, the top of u-boot memory is not the end of memory. PRAM is not used for this reservation. Signed-off-by: York Sun <yorksun@freescale.com>
| * | armv8: fsl-layerscape: Make DDR non secure in MMU tablesYork Sun2015-12-15-14/+107
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DDR has been set as secure in MMU tables. Non-secure master such as SDHC DMA cannot access data correctly. Mixing secure and non- secure MMU entries requirs the MMU tables themselves in secure memory. This patch moves MMU tables into a secure DDR area. Early MMU tables are changed to set DDR as non-secure. A new table is added into final MMU tables so secure memory can have 2MB granuality. gd->secure_ram tracks the location of this secure memory. For ARMv8 SoCs, the RAM base is not zero and RAM is divided into several banks. gd->secure_ram needs to be maintained before using. This maintenance is board-specific, depending on the SoC and memory bank of the secure memory falls into. Signed-off-by: York Sun <yorksun@freescale.com>
| * | move erratum a008336 and a008514 to soc specific fileYao Yuan2015-12-15-0/+37
| | | | | | | | | | | | | | | | | | | | | | | | As the errata A008336 and A008514 do not apply to all LS series SoCs (such as LS1021A, LS1043A) we move them to an soc specific file Signed-off-by: Yuan Yao <yao.yuan@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | armv7/fsl-ls102xa: Workaround for DDR erratum A008514Yao Yuan2015-12-15-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a workaround for hardware erratum. Write the value of 63b2_0042h to EDDRTQCFG will optimal the memory controller performance. The value: 63b2_0042h comes from the hardware team. Signed-off-by: Yuan Yao <yao.yuan@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | armv7: ls102xa: cci-400: Enable snoop and DVM message requests.Yao Yuan2015-12-15-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | Enable snoop and DVM message on all CCI-400 slave ports. Setting on disabled feature (snoop or DVM) is ignored by CCI-400. Signed-off-by: Yuan Yao <yao.yuan@freescale.com> [York Sun: Add commit message] Reviewed-by: York Sun <yorksun@freescale.com>
| * | arm: ls102xa: enable all the snoop signal for masters.Yao Yuan2015-12-13-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable the IP feature's snoop signal to support hardware snoop for cache coherence. SNPCNFGCR contains the bits to drive snoop signal for various masters. Signed-off-by: Yuan Yao <yao.yuan@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | arm: ls1021a: merge SoC specific code in a separate fileYao Yuan2015-12-13-0/+67
| | | | | | | | | | | | | | | | | | | | | Create a soc.c file to put the code for soc special settings. Signed-off-by: Yuan Yao <yao.yuan@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | fsl_*_serdes.c: Modify memset call in serdes_initTom Rini2015-12-13-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GCC 5.x does not like sizeof(array_variable) and errors out. Change these calls to be instead sizeof(u8) (as that's what serdes_prtcl_map is) * SERDES_PRCTL_COUNT (the number of array elements). Cc: York Sun <yorksun@freescale.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | arm: ls102x: add get_svr and IS_SVR_REV helperShengzhou Liu2015-12-13-0/+8
| | | | | | | | | | | | | | | Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | | armv7: omap-common: Rework SPL board_mmc_init()Tom Rini2015-12-14-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the changes in a1e56cf the way that we had board_mmc_init() structured for OMAP parts (so that we always report device 0) are no longer functional. For now, make the case of booting from the second device initialize both devices (we have no devices that only have the second device as MMC). A further rework and consolidation of the functions should be done at a later date. Tested on Beaglebone Black (SD and eMMC boot). Reported-by: Vagrant Cascadian <vagrant@debian.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* | | am33xx,ddr3: fix ddr3 sdram configurationEgli, Samuel2015-12-12-1/+10
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the DDR3 initialization procedure in order to comply with DDR3 standard. A 500 us delay is specified between the DDR3 reset and clock enable signal. Until now, this delay was not respected. Some DDR3 chips don't bother but the bigger the RAM becomes the more likely it seems that this delay is needed. We observed that DRAM > 256 MB from the manufacturer Samsung have an issue when the specification is not respected. Changes: 1) Add a 1 ms wait for L3 timeout error trigger 2) Don't delay DDR3 initialization Bit 31 of emif_sdram_ref_ctrl shouldn't be set because his suppresses the initialization of DDR3 Signed-off-by: Samuel Egli <samuel.egli@siemens.com> Reviewed-by: James Doublesin <doublesin@ti.com> Cc: Tom Rini <trini@konsulko.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Roger Meier <r.meier@siemens.com> Cc: Heiko Schocher <hs@denx.de>
* | sunxi: Fix H3 DRAM DQ read delay configurationJens Kuske2015-12-10-6/+6
| | | | | | | | | | | | | | | | | | | | | | The read delays were set incorrectly, leading to reliability issues at higher DRAM clock speeds. This commit adjusts this to match the vendor boot0 behaviour. Signed-off-by: Jens Kuske <jenskuske@gmail.com> Tested-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | sun4i: clock: Cleanup some whitespace errorsOlliver Schinagl2015-12-10-3/+3
| | | | | | | | | | | | | | | | Add some spaces around operators. Signed-off-by: Olliver Schinagl <o.schinagl@ultimaker.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | sunxi: twi: Enable clocks on sun7iOlliver Schinagl2015-12-10-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 6c739c5d added code to enable i2c bus 4 and 5 on the sun7i SoC but forgot to extend the range check in clock_twi_onoff, resulting in the clock not getting enabled. The range-check is not needed at all, since clock_twi_onoff only gets called with such high indexes when CONFIG_I2C3_ENABLE / CONFIG_I2C4_ENABLE is set and Kconfig already only allows these on sun6i / sun7i. This commit removes the range-check all together fixing i2c bus 4 and 5 not working on sun7i. Signed-off-by: Olliver Schinagl <o.schinagl@ultimaker.com> [hdegoede@redhat.com] Remove range check instead of extending it Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | sunxi: Add support for Allwinner A83T DRAMvishnupatekar2015-12-10-0/+425
| | | | | | | | | | | | | | | | | | | | | | Add support for A83T dram. Register are different from sun8i A33. init code is similar to A33 dram init. hope we'll shift duplicate code in dram_sun8i_* to dram helper in future. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | sunxi: clk: add basic clocks for A83Tvishnupatekar2015-12-10-0/+140
| | | | | | | | | | | | | | | | | | | | | | Add basic clocks pll1, pll5, and some default values from allwinner u-boot. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> [hdegoede@redhat.com] Fix PLL6 init to run at 600 MHz instead of 288 MHz, fixing the mmc support not working [hdegoede@redhat.com] Fix PLL init code to properly wait for the PLL-s to stabilize, fixing cold-booting directly from sdcard not working Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | sunxi: power: enabled support for axp818vishnupatekar2015-12-10-3/+5
| | | | | | | | | | | | | | | | | | Enabled support for AXP818 in SPL and u-boot. DCDC1, DCDC2, DCDC3 and DCSC5 are enabled. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | sunxi: Add support for UART0 in PB pin group on A83Tvishnupatekar2015-12-10-0/+4
| | | | | | | | | | | | | | | | | | | | On A83T, PB9,PB10 are UART0 pins. On allwinner A83T Dev board(h8homlet), this uart0 serial connector is exposed. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | sunxi: Add Machine Support for A83T SOCvishnupatekar2015-12-10-0/+2
| | | | | | | | | | | | | | | | | | | | | | Allwinner A83T is octa-core cortex-a7 SOC. This enables support for A83T. SMP is not yet supported. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | am33xx: Update serial pdataTom Rini2015-12-06-11/+7
| | | | | | | | | | | | | | | | We now want to make sure that we have the platform data for NS16550 when we do not have OF_CONTROL set. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | Change e-mail address of Kamil LulkoKamil Lulko2015-12-05-13/+13
| | | | | | | | Signed-off-by: Kamil Lulko <kamil.lulko@gmail.com>
* | arch/arm/cpu/arm920t/ep93xx/led.c: Mark inline functions as static inlineTom Rini2015-12-05-2/+2
| | | | | | | | | | | | | | | | With gcc-5.x we get warning about inline non-static functions referring to static elements. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-12-04-2/+17
|\ \ | |/
| * ARM: mxs: fix VDDD brownout settingMichael Heimpold2015-12-01-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At the moment, the desired brownout is at 1.0V. However, this setting cannot be realized by hardware since we have only 3 bits to represent the voltage difference from the target value. Target value is 1500 mV, brownout target is 1000 mV, voltage steps are 25 mV. Register content calculation: (1500 [mV] - 1000 [mV]) / 25 [mV] = 20 (decimal) = 0x14 Register takes only 3 bits, that is 0x4. But 0x4 * 25 [mV] = 100 [mV], that means that actual brownout level is 1500 [mV] - 100 [mV] = 1.4 V. Minimum possible BO level is 1500 [mV] - 0x7 * 25 [mV] = 1315 [mV]. So lets use this value as desired BO value (which is also the same as FSL bootlets use). Signed-off-by: Michael Heimpold <mhei@heimpold.de> Cc: Marek Vasut <marex@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de>
| * mx6: clock: Modify GPMI clock to support mx6sxYe.Li2015-11-25-0/+12
| | | | | | | | | | | | | | On mx6sx, the CCM register bits for GPMI are different as other mx6 platforms. Modify the GPMI clock function to support mx6sx. Signed-off-by: Ye.Li <B37916@freescale.com>
| * cgtqmx6eval: Add SPL supportOtavio Salvador2015-11-25-0/+3
| | | | | | | | | | | | | | | | | | Congatec has several MX6 boards based on quad, dual, dual-lite and solo. Add SPL support so that all the variants can be supported Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2015-11-30-18/+204
|\ \
| * | armv8: ls2085a: Add workaround of errata A009635Prabhakar Kushwaha2015-11-30-0/+69
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the core runs at higher than x3 speed of the platform, there is possiblity about sev instruction to getting missed by other cores. This is because of SoC Run Control block may not able to sample the EVENTI(Sev) signals. Configure Run Control and EPU to periodically send out EVENTI signals to wake up A57 cores. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | armv8: fsl-layerscape: Fix "cpu release" commandYork Sun2015-11-30-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | When one core is released, other cores may not have valid entry address. Those cores are trapped by "wfe" and wait for further instruction. When their address is set, they need to be kicked off by "sev". Signed-off-by: York Sun <yorksun@freescale.com>
generated by cgit v1.1 at 2024-11-10 23:46:19 +0000