summaryrefslogtreecommitdiff
path: root/arch/arm/cpu
Commit message (Collapse)AuthorAgeLines
* ENGR00331269 arm: mx6: select OSC as uart's clk parentAnson Huang2015-04-29-0/+9
| | | | | | | | | | As M4 is sourcing UART clk from OSC, to make UART work when M4 is enabled, need to select OSC as clk parent, 24M OSC is enough for debug UART in uboot. Signed-off-by: Anson Huang <b20788@freescale.com> (cherry picked from commit 8b903f529370fdc59cc03b3ced954ed894753044) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00322860 iMX6SX: Add function to check M4 status before bootingYe.Li2015-04-29-0/+13
| | | | | | | | | Add new function "arch_auxiliary_core_check_up" to check whether M4 is already up. Therefore, avoid starting M4 again when it is running. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 54a0803b29c5ab459bedfb2c68c1e94b89866aa1) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00321299 gis: clean csi0 input mux set bit in GPRSandor Yu2015-04-29-0/+6
| | | | | | | | | | When gis enable in uboot, the CSI0 input mux select setting to vadc module, clean the bit when gis disabled. Signed-off-by: Sandor Yu <R01008@freescale.com> (cherry picked from commit ae66b17b7da3be50dc81ca636b67e8e879f52e26) (cherry picked from commit c83fd326e810c2fff44b8b02e78406d5d04c977c) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00321260-1 iMX6: Add support to get CPU serial numberYe.Li2015-04-29-0/+13
| | | | | | | | | | The android boot needs get_board_serial function to get the CPU uid as the serial number. Implement this function to read the uid from fuse for all iMX6 platforms. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 8d355a9d6f138e1c1cd04dbadb7b5b3e2d692701) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00320350 iMX6SLEVK: Fix build warning of PCIE Phy power downYe.Li2015-04-29-0/+2
| | | | | | | | | | | | | | Since the iMX6SL does not have PCIE module, should not define the function "imx_set_pcie_phy_power_down" for it. Otherwise, get the build warning below: arch/arm/cpu/armv7/mx6/soc.c:446:13: warning: 'imx_set_pcie_phy_power_down' defined but not used [-Wunused-function] static void imx_set_pcie_phy_power_down(void) Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 987c48c07c9ef62fa3fe55faa6f7369b30637127) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00319965 pcie: mask the imx6sl outRichard Zhu2015-04-29-2/+7
| | | | | | | | | imx6sl doesn't have the pcie module, mask the pcie related codes from imx6sl. Signed-off-by: Richard Zhu <r65037@freescale.com> (cherry picked from commit acaff11da33f8f0cb1521d3c48e64e7ed9a87bec) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00319415 pcie: random link down issue after warm-rstRichard Zhu2015-04-29-0/+18
| | | | | | | | | | | | | | | | | | | There are about 0.02% percentage on some imx6q/dl/solo hw boards, random pcie link down when warm-reset is used. Make sure to clear the ref_ssp_en bit16 of gpr1 before warm-rst, and set ref_ssp_en after the pcie clks are stable to workaround it. rootcause: * gpr regisers wouldn't be reset by warm-rst, while the ref_ssp_en is required to be reset by pcie. (work-around in u-boot) * ref_ssp_en should be set after pcie clks are stable. (work-around in kernel) Signed-off-by: Richard Zhu <r65037@freescale.com> (cherry picked from commit 5cc825b12c6b86a22f1a6a0535b52cf3ee142e77) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00315894-77 mx6 soc: Add vadc power up/down functionYe.Li2015-04-29-0/+46
| | | | | | | | | | | | Add vadc power up/down function. Signed-off-by: Sandor Yu <R01008@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 96d990ef754a879f6ca9da4adf6e0be3d21cdc51) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Conflicts: arch/arm/include/asm/arch-mx6/imx-regs.h
* ENGR00315894-76 mx6 clock: Add vadc clock enable functionYe.Li2015-04-29-0/+10
| | | | | | | | | | | | | Add vadc clock enable function. Signed-off-by: Sandor Yu <R01008@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 721c7a1448c5b7265b597b83d18f8338a27ea213) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Conflicts: arch/arm/cpu/armv7/mx6/clock.c arch/arm/include/asm/arch-mx6/clock.h
* ENGR00315894-71 iMX6SX Update registers and clock for displayYe.Li2015-04-29-0/+199
| | | | | | | | | | | | | Add registers and clock functions to enable/set LCDIF clock and LVDS. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit ef9d769f9ad1b504a1df8b987d269df9944d8e0c) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Conflicts: arch/arm/include/asm/arch-mx6/clock.h arch/arm/include/asm/arch-mx6/crm_regs.h arch/arm/include/asm/arch-mx6/imx-regs.h
* ENGR00315894-57 iMX6SX: Add M4 boot support at soc levelYe.Li2015-04-29-0/+25
| | | | | | | | | | | Implement the override function "arch_auxiliary_core_up" to boot Cortex-M4 by executing command "bootaux". The parameter "boot_private_data" points to fields where stores the stack address and PC address for M4 to run. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 98c15deb3083d5dac7900c58e95f2ac2f422a4d3) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10774-3 iMX6SX/SL: Modify SOC to support two ENETPeng Fan2015-04-29-3/+40
| | | | | | | | | | | | | | | | | | | iMX6SX has different enet system clocks with iMX6SL, and has two ENET controllers. So update clocks and soc APIs accordingly to support this features. 1. Enet RGMII TX clock source may come from external or internal PLL. By default, use the external phy CLK_25M output as TX clock source. When using internal PLL as source, the function enable_fec_anatop_clock must be called to enable clock for each enet controller. 2. Modify the MAC address function "imx_get_mac_from_fuse" to get either ENET MAC address. 3. Add configuration "CONFIG_FEC_MXC_25M_REF_CLK" to enable ENET 25Mhz reference clock. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00315894-11 i.mx6:shutdown vddpu and pcie phy to save powerYe.Li2015-04-29-0/+31
| | | | | | | | | | | | | shutdown vddpu and pcie phy to save power Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Jason Liu <r64343@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 580011f86caf137d59a487694f6f7da042164e05) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Conflicts: arch/arm/cpu/armv7/mx6/soc.c
* MLK-10774-2 HDMI: splash screen function enhancementPeng Fan2015-04-29-1/+11
| | | | | | | | | | | | | | -Change HDMI video mode to VGA. -Add pixel clock fraction part setting in IPU driver, fix video mode timing issue. -Add overflow state clear workaround, fix kernel hang in HDMI driver issue. -Correct IPU clock to 264MHz. Signed-off-by: Sandor Yu <R01008@freescale.com> Signed-off-by: Nitin Garg <nitin.garg@freescale.com> (cherry picked from commit 45d532a0237f5baf2ec95b4364ec5bc94d312689) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10774-1 imx: LDO: add LDO bypassPeng Fan2015-04-29-0/+142
| | | | | | | | | | | | | | | | | | | | | | | | This patch is from two commits: 1. 748eac71fde78aa0c2e8cb3a3bab94bd994c06f5 ENGR00315499-5: Support i.MX6 1.2GHz via LDO bypass Add check for 1.2GHz core speed. If Speed grading fuse is for 1.2GHz, enable LDO bypass and setup PMIC voltages. LDO bypass is dependent on the flatten device tree file. 2. 93d457e4c601ee5266bc30b7dfa5fa1bbfa8500a MLK-9891-1: ARM: imx6: split WDOG_B setting from set_anatop_bypass() function We set WDOG_B in set_anatop_bypass() before, because it is the only case, but now on i.mx6sabreauto board, we didn't use ldo-bypass mode, but have to use WDOG_B to reboot whole board, so split these code to independent function so that board file can call it freely. Board code is not included, board ldo bypass code will be in bsp update code. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-04-13-0/+27
|\
| * ARM: mx5: add support for USB armory boardAndrej Rosano2015-04-09-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for Inverse Path USB armory board, an open source flash-drive sized computer based on Freescale i.MX53 SoC. http://inversepath.com/usbarmory Signed-off-by: Andrej Rosano <andrej@inversepath.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Chris Kuethe <chris.kuethe@gmail.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Vagrant Cascadian <vagrant@debian.org> Tested-By: Vagrant Cascadian <vagrant@debian.org> Tested-by: Chris Kuethe <chris.kuethe@gmail.com>
| * ARM: mx5: move to a standard arch/board approachAndrej Rosano2015-04-09-0/+16
| | | | | | | | | | | | | | | | | | | | Move the MX5 based boards to arch/arm/cpu/armv7/mx5, following the commit: 89ebc82137bebb11a8191f8b9cbf08f2533ae8bc Signed-off-by: Andrej Rosano <andrej@inversepath.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Vagrant Cascadian <vagrant@debian.org> Tested-by: Chris Kuethe <chris.kuethe@gmail.com>
* | arm: armada-xp: Fix SPL for AXP by using save_boot_params_retStefan Roese2015-04-11-1/+1
| | | | | | | | | | | | | | | | | | | | | | Patch e11c6c27 (arm: Allow lr to be saved by board code) introduced a different method to return from save_boot_params(). The SPL support for AXP has been pulled and changing to this new method is now required for SPL to work correctly. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Luka Perkov <luka.perkov@sartura.hr>
* | lpc32xx: add support for board work_92105Albert ARIBAUD \(3ADEV\)2015-04-10-0/+159
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Work_92105 from Work Microwave is an LPC3250- based board with the following features: - 64MB or 128MB SDR DRAM - 1 GB SLC NAND, managed through MLC controller. - Ethernet - Ethernet + PHY SMSC8710 - I2C: - EEPROM (24M01-compatible) - RTC (DS1374-compatible) - Temperature sensor (DS620) - DACs (2 x MAX518) - SPI (through SSP interface) - Port expander MAX6957 - LCD display (HD44780-compatible), controlled through the port expander and DACs This board has SPL support, and uses the LPC32XX boot image format. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
* | lpc32xx: add LPC32xx SSP support (SPI mode)Albert ARIBAUD \(3ADEV\)2015-04-10-0/+14
| | | | | | | | | | Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
* | lpc32xx: add GPIO supportAlbert ARIBAUD \(3ADEV\)2015-04-10-0/+5
| | | | | | | | | | | | This driver only supports Driver Model, not legacy model. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
* | lpc32xx: i2c: add LPC32xx I2C interface supportAlbert ARIBAUD \(3ADEV\)2015-04-10-0/+11
| | | | | | | | Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
* | lpc32xx: mtd: nand: add MLC NAND controllerAlbert ARIBAUD \(3ADEV\)2015-04-10-0/+6
| | | | | | | | | | | | | | | | | | | | The controller's Reed-Solomon ECC hardware is used except of course for raw reads and writes. It covers in- and out-of-band data together. The SPL framework is supported. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
* | lpc32xx: add Ethernet supportAlbert ARIBAUD \(3ADEV\)2015-04-10-0/+16
| | | | | | | | Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
* | Merge branch 'u-boot/master'Albert ARIBAUD2015-04-10-557/+136
|\ \
| * | am33xx/ddr.c: Fix regression on DDR2 platformsTom Rini2015-04-07-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Back in fc46bae a "clean up" was introduced that intended to reconcile some of the AM335x codepaths based on how AM43xx operates. Unfortunately this introduced a regression on the DDR2 platforms. This was un-noticed on DDR3 (everything except for Beaglebone White) as we had already populated sdram_config correctly in sequence. This change brings us back to the older behavior and is fine on all platforms. Tested on Beaglebone White, Beaglebone Black and AM335x GP EVM Reported-by: Matt Ranostay <mranostay@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
| * | Exynos5: Fix rpll_sdiv to support both peach-pit and peach-pi panelsAjay Kumar2015-04-06-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The existing setting for rpll_sdiv generates 70.5Mhz RPLL video clock to drive 1366x768 panel on peach_pit. This clock rate is not sufficient to drive 1920x1080 panel on peach-pi. So, we adjust rpll_sdiv to 3 so that it generates 141Mhz pixel clock which can drive peach-pi LCD. This change doesn't break peach-pit LCD since 141/2=70.5Mhz, i.e FIMD divider at IP level will get set to 1(the required divider setting will be calculated and set by exynos_fimd_set_clock()) and hence peach-pit LCD still works fine. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | arm: exynos: add display clocks for Exynos5800Ajay Kumar2015-04-06-3/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add get_lcd_clk and set_lcd_clk callbacks for Exynos5800 needed by exynos video driver. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | Exynos: Clock: Fix exynos5_get_periph_rate for I2C.Guillaume GARDET2015-04-06-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 2e82e9252695a612ab0cbf40fa0c7368515f6506 'Exynos: Clock: Cleanup soc_get_periph_rate' introduced a bug in I2C config. This patch makes cros_ec keyboard working again on Samsung Chromebook (snow). Changes in V2: reorder lines as requested by Joonyoung Shim. Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Akshay Saraswat <akshay.s@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Reviewed-by: Simon Glass <sjg@chroimum.org> Tested-by: Simon Glass <sjg@chroimum.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini2015-04-03-195/+0
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: board/armltd/vexpress64/vexpress64.c Signed-off-by: Tom Rini <trini@konsulko.com>
| | * | ARM: tegra: pinctrl: move Tegra210 code to the correct dirStephen Warren2015-03-30-195/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patches that added the Tegra210 pinctrl driver and renamed directories arch/arm/cpu/tegra{$soc}-common -> arch/arm/mach-tegra/tegra-${soc} crossed. Move the Tegra210 pinctrl driver to the correct location. This wasn't detected since Tegra210 support is in the process of being added, and isn't buildable yet. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | | Merge branch 'master' of git://git.denx.de/u-boot-imxTom Rini2015-03-31-0/+42
| |\ \ \ | | | |/ | | |/|
| | * | board/seco: Add mx6q-uq7 basic board supportBoris BREZILLON2015-03-23-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add basic SECO MX6Q/uQ7 board support (Ethernet, UART, SD are supported). It also adds a Kconfig skeleton to later add more SECO board (supporting SoC and board variants). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
| | * | ARM: mx6: move to a standard arch/board approachBoris BREZILLON2015-03-23-0/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Freescale boards are currently all defined in arch/arm/Kconfig, which makes them hard to detect. Moreover the MX6 SoC variant (Q, D, DL, S, SL) selection is currently done via the SYS_EXTRA_OPTIONS option which marked as deprecated. Move to a more standard way to select sub-architecture and board by creating a Kconfig under arch/arm/cpu/armv7/mx6 and a new ARCH_MX6 option. Existing MX6 board definitions should be moved in this new Kconfig in choice menu, and new boards should be directly declared in this menu. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
| * | | sunxi: use CONFIG_SYS_CLK_FREQ to set cpu clockIain Paton2015-03-29-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | make the CPU clock selectable via Kconfig this removes the sunxi specific CONFIG_CLK_FULL_SPEED defined in each soc header and replaces it's use in board/sunxi/board.c with CONFIG_SYS_CLK_FREQ from Kconfig which allows us to configure board specific frequency on boot Signed-off-by: Iain Paton <ipaton0@gmail.com> [hdegoede@redhat.com s/CONFIG_SYS_CLK_FREQ/CONFIG_TIMER_CLK_FREQ/ for the arch-timer clk speed on sun7i to fix mis-compile on sun7i] Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | sunxi: sun4i: improve cpu clock selection methodIain Paton2015-03-29-16/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | clock_set_pll1 would pick the next highest available cpu clock speed if a value not in the pre defined table was selected. this potentially results in overclocking the soc. reverse the selection method so that we select the next lowest speed and add the missing 912Mhz setting that's requested by sun7i which also uses the sun4i clock code. Signed-off-by: Iain Paton <ipaton0@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | sunxi: musb: Fix some lo speed devices not working with musb hostHans de Goede2015-03-29-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The usb0 / otg phy on sunxi boards has a bug where it wrongly detects a high speed squelch on usb reset deassert when a lo speed device is plugged in. The android kernel has a work around for this in the form of temporary disabling the phy's squelch detection on reset deassert, this commit adds the same workaround to the u-boot sunxi musb code, thereby fixing various usb lo speed devices not working. Tested with a (before non working) usb keyboard and a usb 2.4 GHz wireless keyboard/mouse combo receiver. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | | ARM: bcm283x: merge BCM2835/BCM2836 directories into mach-bcm283xMasahiro Yamada2015-03-28-325/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BCM2835 (used on Raspberry Pi) and BCM2836 (used on Raspberry Pi 2) are similar enough. One of the biggest differences is the ARM processor. It is reasonable to collect the source files into a single place, arch/arm/mach-bcm283x/. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
| * | | malloc_f: enable SYS_MALLOC_F by default if DM is onMasahiro Yamada2015-03-28-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This option has a bool type, not hex. Fix it and enable it if CONFIG_DM is on because Driver Model always requires malloc memory. Devices are scanned twice, before/after relocation. CONFIG_SYS_MALLOC_F should be enabled to use malloc memory before relocation. As it is board-independent, handle it globally. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Robert Baldyga <r.baldyga@samsung.com>
| * | | malloc_f: remove redundant defalut values of CONFIG_SYS_MALLOC_F_LENMasahiro Yamada2015-03-28-6/+0
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | The default value of CONFIG_SYS_MALLOC_F_LEN is defined by ./Kconfig as 0x400. Each defconfig or Kconfig need not repeat the same value. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Robert Baldyga <r.baldyga@samsung.com>
* | | ARM: move -march=* and -mtune= options to arch/arm/MakefileMasahiro Yamada2015-03-27-69/+0
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | My main motivations for this commit are: [1] Follow the arch/arm/Makefile style of Linux Kernel [2] Maintain compiler options systematically Currently, we give -march=* and -mtune=* options inconsistently: Only some of the CPUs pass -march=* and -mtune=* options. By collecting such options into the single place arch/arm/Makefile we can tell which options are missing at a glance. [3] Prepare for deprecating arch/*/cpu/*/config.mk Note: This commit just moves the compiler options so as not to change the behavior at all. It does not care about the correctness of the given options. Fox example, "-march=armv5te" might be better than "-march=armv4" for ARM946EJS, but it is beyond the scope this commit. Also, filling the missing -march=* and -tune=* is left to follow-up patches. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Stefan Roese <sr@denx.de>
* | remove unnecessary version.h includesRob Herring2015-03-24-20/+0
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Various files are needlessly rebuilt every time due to the version and build time changing. As version.h is not actually needed, remove the include. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Stefano Babic <sbabic@denx.de> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Tom Warren <twarren@nvidia.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Macpaul Lin <macpaul@andestech.com> Cc: Wolfgang Denk <wd@denx.de> Cc: York Sun <yorksun@freescale.com> Cc: Stefan Roese <sr@denx.de> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Simon Glass <sjg@chromium.org> Cc: Philippe Reynes <tremyfr@yahoo.fr> Cc: Eric Jarrige <eric.jarrige@armadeus.org> Cc: "David Müller" <d.mueller@elsoft.ch> Cc: Phil Edworthy <phil.edworthy@renesas.com> Cc: Robert Baldyga <r.baldyga@samsung.com> Cc: Torsten Koschorrek <koschorrek@synertronixx.de> Cc: Anatolij Gustschin <agust@denx.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Łukasz Majewski <l.majewski@samsung.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-03-18-1/+18
|\
| * mx6: soc: Switch to cold resetDirk Behme2015-03-13-0/+18
| | | | | | | | | | | | | | | | Disable the warm reset and enable the cold reset for a more reliable restart ('reset'). This is taken from the Linux kernel, see imx_src_init() in arch/arm/mach-imx/src.c. Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
| * imx:mx6 remove duplicated includesPeng Fan2015-03-13-1/+0
| | | | | | | | | | | | There is no need to include asm/bootm.h twice, so remove one. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
| * Merge branch 'master' of git://git.denx.de/u-bootStefano Babic2015-03-05-3648/+1610
| |\
* | | ARM: OMAP3: rx51: Enable workaround for ARM errata 454179, 430973, 621766Nishanth Menon2015-03-13-25/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | RX51 has a secure logic which uses different parameters compared to traditional implementation. So, make the generic secure acr write over-ride-able by board file and refactor rx51 code to use this. While at it, enable the OMAP3 specific errata code for 454179, 430973, 621766. Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766Nishanth Menon2015-03-13-21/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | Enable the OMAP3 specific errata code for 454179, 430973, 621766 and while at it, remove legacy non-revision checked errata logic. Signed-off-by: Nishanth Menon <nm@ti.com> Tested-by: Matt Porter <mporter@konsulko.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | ARM: OMAP5 / DRA7: Setup L2 Aux Control Register with recommended configurationNishanth Menon2015-03-13-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update to existing recommendation for L2ACTLR configuration to prevent system instability and optimize performance. These apply to both OMAP5 and DRA7. Reported-by: Vivek Chengalvala <vchengalvala@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.1 at 2024-10-18 04:22:04 +0000