summaryrefslogtreecommitdiff
path: root/arch/arm/cpu/armv8/fsl-layerscape
Commit message (Collapse)AuthorAgeLines
* ARMv8/fsl-ppa: Consolidate PPA image stored-media flag for XIPHou Zhiqiang2016-08-02-1/+1
| | | | | | | | | | | The PPA binary may be stored on QSPI flash instead of NOR. So, deprecated CONFIG_SYS_LS_PPA_FW_IN_NOR in favour of CONFIG_SYS_LS_PPA_FW_IN_XIP to prevent fragmentation of code by addition of a new QSPI specific flag. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: fsl-layerscape: mmu: Fix enabling MMUYork Sun2016-07-26-1/+4
| | | | | | | | | MMU bit in SCTLR needs to be set explicitly after tables are created. It isn't an issue for EL3 becuase this bit is already set by early MMU setup. But for other exception levels this bit was not set. Signed-off-by: York Sun <york.sun@nxp.com>
* armv8: fsl_lsch2: Add LS1046A SoC supportMingkai Hu2016-07-26-2/+168
| | | | | | | | | | | The LS1046A processor is built on the QorIQ LS series architecture combining four ARM A72 processor cores with DPAA 1.0 support. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Mihai Bantea <mihai.bantea@freescale.com> Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: fsl_lsch2: Add SerDes 2 supportQianyu Gong2016-07-26-0/+19
| | | | | | | | | New SoC LS1046A belongs to Freescale Chassis Generation 2 and has two SerDes so we need to add this support in fsl_lsch2. The SoC related SerDes 2 support will be added in SoC patch. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: fsl-layerscape: Add A72 core detectionAlison Wang2016-07-26-1/+2
| | | | | | | | | | Add support to detect Cortex-A72 core for printing it out. The Initiator Version of A72 core should be 0x4. Signed-off-by: Alison Wang <alison.wang@nxp.com> Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-07-19-319/+159
|\ | | | | | | | | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: arch/arm/cpu/armv8/Makefile arch/arm/lib/bootm-fdt.c
| * ARMv8/Layerscape: switch SMP method accordinglyHou Zhiqiang2016-07-19-3/+46
| | | | | | | | | | | | | | | | | | If the PSCI and PPA is ready, skip the fixup for spin-table and waking secondary cores. Otherwise, change SMP method to spin-table, and the device node of PSCI will be removed. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * ARMv8/layerscape: Add FSL PPA supportHou Zhiqiang2016-07-19-0/+49
| | | | | | | | | | | | | | | | | | | | | | The FSL Primary Protected Application (PPA) is a software component loaded during boot which runs in TrustZone and remains resident after boot. Use the secure firmware framework to integrate FSL PPA into U-Boot. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: fsl-layerscape: add i/d-cache enable function to enable_cachesHou Zhiqiang2016-07-19-4/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | This function assume that the d-cache and MMU has been enabled earlier, so it just created MMU table in main memory. But the assumption is not always correct, for example, the early setup is done in EL3, while enable_caches() is called when the PE has turned into another EL. Define the function mmu_setup() for fsl-layerscape to cover the weak one. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: layerscape: Convert to use common MMU frameworkYork Sun2016-07-19-309/+51
| | | | | | | | | | | | | | | | Drop platform code to create static MMU tables. Use common framework to create MMU tables on the run. Tested on LS2080ARDB with secure and non-secure ram scenarios. Signed-off-by: York Sun <york.sun@nxp.com>
| * armv8: Move secure_ram variable out of generic global dataYork Sun2016-07-15-10/+10
| | | | | | | | | | | | | | Secure_ram variable was put in generic global data. But only ARMv8 uses this variable. Move it to ARM specific data structure. Signed-off-by: York Sun <york.sun@nxp.com>
* | Various, unrelated tree-wide typo fixes.Robert P. J. Day2016-07-16-1/+1
|/ | | | | | | | | | | | | | | | | | | Fix a number of typos, including: * "compatble" -> "compatible" * "eanbeld" -> "enabled" * "envrionment" -> "environment" * "FTD" -> "FDT" (for "flattened device tree") * "ommitted" -> "omitted" * "overriden" -> "overridden" * "partiton" -> "partition" * "propogate" -> "propagate" * "resourse" -> "resource" * "rest in piece" -> "rest in peace" * "suport" -> "support" * "varible" -> "variable" Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
* Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-06-28-5/+7
|\
| * armv8: fsl-layerscape: Append "A" in SoC name for ARM based SoCsPrabhakar Kushwaha2016-06-28-2/+2
| | | | | | | | | | | | | | | | | | | | | | Freescale ARMv8 SoC name ends with "A" to represent ARM SoCs. like LS2080A, LS1043A, LS1012A. So append "A" to SoC names. Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8/fsl_lsch2: Correct the cores frequency initializationHou Zhiqiang2016-06-24-3/+5
| | | | | | | | | | | | | | | | The register CLKCNCSR controls the frequency of all cores in the same cluster. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | common: Pass the boot device into spl_boot_mode()Marek Vasut2016-06-26-1/+1
|/ | | | | | | | | | | | | | | | | | The SPL code already knows which boot device it calls the spl_boot_mode() on, so pass that information into the function. This allows the code of spl_boot_mode() avoid invoking spl_boot_device() again, but it also lets board_boot_order() correctly alter the behavior of the boot process. The later one is important, since in certain cases, it is desired that spl_boot_device() return value be overriden using board_boot_order(). Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> [add newly introduced zynq variant] Signed-aff-by: Andreas Bießmann <andreas@biessmann.org>
* Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2016-06-18-10/+7
|\ | | | | | | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
| * armv8/ls2080: Remove workaround for erratum A008751Sriram Dash2016-06-13-10/+0
| | | | | | | | | | | | | | | | | | | | This errata a008751 is applied on Soc specific file currently.This will be moved to a file where all the errata implementation will take place for usb for fsl. This patch removes the errata workaround from soc specific file for LS2080. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
| * arm64: fsl-layerscape: add get_svr and IS_SVR_REV helperSriram Dash2016-06-13-0/+7
| | | | | | | | | | | | | | | | Adds get_svr and IS_SVR_REV helpers for ARMv8 platforms, similar to PPC and ARMv7. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
* | board: ls2080a: Add "mcinitcmd" env for MC & DPL deploymentPratiyush Mohan Srivastava2016-06-10-0/+29
| | | | | | | | | | | | | | | | | | | | | | | | Environment variable mcinitcmd is defined to initiate MC and DPL deployment from the location where it is stored (NOR, NAND, SD, SATA, USB) during booting. If this variable is not defined then macro MC_BOOT_ENV_VAR will be null and MC will not be booted and DPL will not be applied during U-boot booting. Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | armv8/ls2080a: configure PMU's PCTBENR to enable WDTYunhui Cui2016-06-10-0/+12
|/ | | | | | | | | The SP805-WDT module on LS2080A requires configuration of PMU's PCTBENR register to enable watchdog counter decrement and reset signal generation. The watchdog clock needs to be enabled first. Signed-off-by: Yunhui Cui <yunhui.cui@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: fsl-layerscape: Add support of QorIQ LS1012A SoCPrabhakar Kushwaha2016-06-03-0/+136
| | | | | | | | | | | | | | | | | | | | | The QorIQ LS1012A processor, optimized for battery-backed or USB-powered, integrates a single ARM Cortex-A53 core with a hardware packet forwarding engine and high-speed interfaces to deliver line-rate networking performance. This patch add support of LS1012A SoC along with - Update platform & DDR clock read logic as per SVR - Define MMDC controller register set. - Update LUT base address for PCIe - Avoid L3 platform cache compilation - Update USB address, errata - SerDes table - Added CSU IDs for SDHC2, SAI-1 to SAI-4 Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> Signed-off-by: Makarand Pawagi <makarand.pawagi@mindspeed.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: fsl-layerscape: Organize SoC overview at common locationPrabhakar Kushwaha2016-06-03-0/+86
| | | | | | | | | | SoC overviews are getting repeated across board folders. So, Organize SoC overview at common location i.e. fsl-layerscape/doc Also move README.lsch2 and README.lsch3 in same folder. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: fsl-layerscape: fix compile warning "rcw_tmp"Prabhakar Kushwaha2016-06-03-1/+4
| | | | | | | | | | | arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c: In function ‘get_sys_info’: arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c:29:6: warning: unused variable ‘rcw_tmp’ [-Wunused-variable] u32 rcw_tmp; Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: fsl-layerscape: Avoid LS1043A specifc definesPrabhakar Kushwaha2016-06-03-1/+1
| | | | | | | | Other than LS1043A, LS1012A also Chassis Gen2 Architecture compliant. So Avoid LS1043A specific defines in arch/arm Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: fsl-layerscape: Put SMMU config code in SMMU_BASEPrabhakar Kushwaha2016-06-03-0/+2
| | | | | | | | | | It is not mandatory for Layerscape SoCs to have SMMU. SoCs like LS1012A are layerscape SoC without SMMU IP. So put SMMU configuration code under SMMU_BASE. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: fsl-layerscape: spl: fix the macro name of MMC modeQianyu Gong2016-05-18-1/+1
| | | | | | | MMCSD_MODE_FAT has be renmaed to MMCSD_MODE_FS by commit 205b4f33. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: fsl-layerscape: spl: remove duplicate init_early_memctl_regs()Qianyu Gong2016-05-18-3/+0
| | | | | | | | init_early_memctl_regs() is also be called in board_early_init_f(). So remove the duplicated call in spl code. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: fsl-layerscape: Remove unnecessary flushing dcacheAlison Wang2016-05-18-3/+0
| | | | | | | | | As the issue about the stack will get corrupted when switching between the early and final mmu tables is fixed by commit 70e21b064, the workaround to flush dcache is unnecessary and should be removed. Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8/fdt: add fixup_crypto_nodeAlex Porosanu2016-05-17-0/+19
| | | | | | | | | For Qoriq PPC&ARM v7 platforms, the crypto node is being fixup'ed in order to update the SEC internal version (aka SEC ERA). This patch adds the same functionality to the ARMv8 SoCs. Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8/ls1043: Add workaround for DDR erratum A-008850Shengzhou Liu2016-05-17-0/+36
| | | | | | | | | Barrier transactions from CCI400 need to be disabled till the DDR is configured, otherwise it may lead to system hang. The patch adds workaround to fix the erratum. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* Fix various typos, scattered over the code.Robert P. J. Day2016-05-05-1/+1
| | | | | | | | | | | | | Spelling corrections for (among other things): * environment * override * variable * ftd (should be "fdt", for flattened device tree) * embedded * FTDI * emulation * controller
* armv8: LS2080A: Consolidate LS2080A and LS2085AYork Sun2016-04-06-12/+39
| | | | | | | | | | | | LS2080A is the primary SoC, and LS2085A is a personality with AIOP and DPAA DDR. The RDB and QDS boards support both personality. By detecting the SVR at runtime, a single image per board can support both SoCs. It gives users flexibility to swtich SoC without the need to reprogram the board. Signed-off-by: York Sun <york.sun@nxp.com> CC: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
* armv8: fsl-lsch3: Disable SMMU during secure bootSaksham Jain2016-03-29-1/+17
| | | | | | | | | | | | | During secure boot, SMMU is enabled on POR by SP bootrom. SMMU needs to be put in bypass mode in uboot to enable CAAM transcations to pass through. For non-secure boot, SP BootROM doesn't enable SMMU, which is in bypass mode out of reset. Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com> Signed-off-by: Saksham Jain <saksham.jain@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: fsl-layerscape: Skip reconfigure QSPI clock when booting from QSPIQianyu Gong2016-03-28-1/+1
| | | | | | | | The qspi_cfg register is set by PBI when booting from QSPI. No need to changing it again. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8/fsl-lsch2: fix sdhc clock frequency valueYangbo Lu2016-03-21-0/+4
| | | | | | | | | The eSDHC could select to use platform clock or peripheral clock to generate SD clock. The default selection is platform clock. So, fix the clock frequency value that's calculated for eSDHC. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: fsl-layerscape: Updating entries in Serdes TablePratiyush Srivastava2016-03-21-7/+7
| | | | | | | | | | | The serdes protocol entries in Serdes table 1 for protocol 0x03, 0x33, 0x35 and in Serdes table 2 for protocols 0x45 and 0x47 are updated to reflect the entries in current Reference Manual. Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com> Reported-by: Jose Rivera <german.rivera@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: ls2080a: remove obsolete stream ID partitioning supportStuart Yoder2016-03-21-113/+0
| | | | | | | | | | Remove stream ID partitioning support that has been made obsolete by upstream device tree bindings that specify how representing how PCI requester IDs are mapped to MSI specifiers and SMMU stream IDs. Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: lsch3: Enable WUO config for RNI-20 nodePrabhakar Kushwaha2016-03-21-0/+8
| | | | | | | | | | Enable wuo config to accelerate coherent ordered writes for LS2080A and LS2085A. WRIOP IP is connected to RNI-20 Node. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* arm64: Fix layerscape mmu setupAlexander Graf2016-03-21-0/+5
| | | | | | | | | | | | | | | | | | With commit 7985cdf we converted all systems except for the Layerscape SoCs to the generic descriptor table based page table setup. On the Layerscape SoCs however, we just provide an empty table stub and do the setup ourselves. To reserve enough memory for the tables, we need to override the default counting mechanism which would end up with an empty table because we have no maps. Fixes: 7985cdf Reported-by: York Sun <york.sun@nxp.com> CC: Alison Wang <alison.wang@nxp.com> CC: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Alexander Graf <agraf@suse.de> Tested-by: York Sun <york.sun@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* arm64: Remove non-full-va map codeAlexander Graf2016-03-15-5/+32
| | | | | | | | | | | By now the code to only have a single page table level with 64k page size and 42 bit address space is no longer used by any board in tree, so we can safely remove it. To clean up code, move the layerscape mmu code to the new defines, removing redundant field definitions. Signed-off-by: Alexander Graf <agraf@suse.de>
* armv8/fsl-layerscape: fdt: add fixup for Fman ucodeQianyu Gong2016-02-24-0/+7
| | | | | | | Add fdt fixup to insert Fman firmware into the device tree. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8/ls1043a: Implement workaround for erratum A009660Mingkai Hu2016-02-24-0/+19
| | | | | | | | | Memory controller performance is not optimal with default internal target queue register value, write required value for optimal DDR performance. Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8/ls1043aqds: add QSPI support in SD bootGong Qianyu2016-01-27-0/+3
| | | | | | | | | QSPI and IFC are pin-multiplexed on LS1043A. So we use ls1043aqds_sdcard_ifc_defconfig to support IFC in SD boot and ls1043aqds_sdcard_qspi_defconfig to support QSPI in SD boot. Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
* secure_boot: enable chain of trust for ARM platformsAneesh Bansal2016-01-27-0/+6
| | | | | | | | | | | | | | Chain of Trust is enabled for ARM platforms (LS1021 and LS1043). In board_late_init(), fsl_setenv_chain_of_trust() is called which will perform the following: - If boot mode is non-secure, return (No Change) - If boot mode is secure, set the following environmet variables: bootdelay = 0 (To disable Boot Prompt) bootcmd = CONFIG_CHAIN_BOOT_CMD (Validate and execute Boot script) Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com> Acked-by: Ruchika Gupta <ruchika.gupta@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: Enable all 8 DPMAC ports in LS2080A PersonalityPratiyush Mohan Srivastava2016-01-25-5/+0
| | | | | | | | | | LS2080A has support for 8 DPMAC ports out of which only 5 ports can be used at a time. Enabling all 8 DPMAC ports of LS2080A personality. Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@freescale.com> Acked-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: fsl-lsch3: fixup SYSCLK frequency in device treePrabhakar Kushwaha2016-01-25-0/+3
| | | | | | | | | | | | SYSCLK frequency is dependent on on-board switch settings. It may vary as per requirement. boot-loader is aware of board switch configurations. So Fixup Linux device tree from boot-loader. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> CC: Mingkai Hu <Mingkai.Hu@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8/ls1043a: Implement workaround for PEX erratum A009929Mingkai Hu2015-12-17-0/+16
| | | | | | | | | Consecutive write transactions from core to PCI express outbound path hangs after 25 to 30 transactions depending on core freq. This erratum enable the mbist clock through COP register setting. Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* armv8: Add sata support on Layerscape ARMv8 boardTang Yuantian2015-12-15-0/+43
| | | | | | | | | | | Freescale ARM-based Layerscape contains a SATA controller which comply with the serial ATA 3.0 specification and the AHCI 1.3 specification. This patch adds SATA feature on ls2080aqds, ls2080ardb and ls1043aqds boards. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* armv8: Make SEC read/write as snoopable for LS1043Aneesh Bansal2015-12-15-0/+5
| | | | | | | | For LS1043, SEC read/writes are made snoopable by setting the corresponding bits in SCFG to avoid coherency issues. Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
generated by cgit v1.1 at 2024-09-30 01:20:15 +0000