summaryrefslogtreecommitdiff
path: root/arch/arm/cpu/armv7
Commit message (Collapse)AuthorAgeLines
* omap-common: Remove deprecated arch_cpu_init codePaul Kocialkowski2016-03-15-13/+0
| | | | | | | save_omap_boot_params is called from spl_board_init in the SPL context. Thus, there is no reason to duplicate that call on arch_cpu_init. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* omap-common: Rename set_muxconf_regs_essential to set_muxconf_regsPaul Kocialkowski2016-03-15-2/+2
| | | | | | | There is no distinction between essential and non-essential mux configuration, so it doesn't make sense to have an "essential" prefix. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* omap4: Export jedec sdram timingsPaul Kocialkowski2016-03-15-1/+1
| | | | | | | Individual boards might provide their own emif_get_device_timings function and use the jedec timings in their own way, hence those have to be exported. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* omap4: Export elpidia sdram timingsPaul Kocialkowski2016-03-15-1/+1
| | | | | | | Individual boards might provide their own emif_get_device_timings function and use the elpidia timings in their own way, hence those have to be exported. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* omap4: Export elpidia sdram device detailsPaul Kocialkowski2016-03-15-2/+2
| | | | | | | | | Individual boards might provide their own emif_get_device_details function and use elpidia device details in their own way, hence those have to be exported. This also wraps existing definitions with the proper ifdef logic. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* omap3: Use a define for reboot reason offsetPaul Kocialkowski2016-03-15-3/+5
| | | | | | | | This introduces a define for the offset to the reboot reason, rather than hardcoding it. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@konsulko.com>
* omap3: String-based reboot mode handlingPaul Kocialkowski2016-03-15-4/+10
| | | | | | | | This switches reboot mode handling to a string-based interface, that allows more flexibility to set a common interface with the next generations of OMAP devices. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@konsulko.com>
* Merge branch 'master' of git://git.denx.de/u-boot-videoTom Rini2016-03-15-1/+12
|\
| * imx: mx6: hdmi: handle overflow conditionPeng Fan2016-03-14-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | If HDMI_IH_FC_STAT2_OVERFLOW_MASK is set, we need to do TMDS software reset and write to clear fc_invidconf register. We need minimum 3 times to write to clear the fc_invidconf register, so choose 5 loops here. Signed-off-by: Peng Fan <van.freenix@gmail.com> Signed-off-by: Sandor Yu <sandor.yu@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com>
* | ARM: DRA7: Move emif settings to board specific filesLokesh Vutla2016-03-14-147/+2
| | | | | | | | | | | | | | | | | | | | The newer versions of DRA7 boards has EEPROM populated with DDR size specified in it. Moving DRA7 specific emif related settings to board files so that emif settings can be identified based on EEPROM. Acked-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | ARM: DRA7: Enable EEPROM supportLokesh Vutla2016-03-14-0/+1
| | | | | | | | | | | | | | | | Enable EEPROM support for DRA74-evm. Acked-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | ARM: Various: Future-proof serial platdataAdam Ford2016-03-14-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A few boards still use ns16550_platdata structures, but assume the structure is going to be in a specific order. By explicitly naming each entry, this should also help 'future-proof' in the event the structure changes. Tested on the Logic PD Torpedo + Wireless. I only changed a handful of devices that used the same syntax as the Logic board. Appologies if I missed one or stepped on toes. Thanks to Derald Woods and Alexander Graf. Signed-off-by: Adam Ford <aford173@gmail.com> V6: Add fix to arch/arm/cpu/armv7/am33xx/board.c V5: Add fix to arch/arm/cpu/arm926ejs/lpc32xx/devices.c V4: Fix subject heading V3: Remove reg_offset out in all the structs. It was reverted out, and and if it did exist, it would get initialized to 0 by default. V2: I hastily copy-pasted the boards without looking at the UART number. This addresses 3 boards that use UART3 and not UART1. Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | ARM: OMAP4+: Allow arch specfic code to use early DMLokesh Vutla2016-03-14-9/+21
| | | | | | | | | | | | | | | | | | | | | | Early system initialization is being done before initf_dm is being called in U-Boot. Then system will fail to boot if any of the DM enabled driver is being called in this system initialization code. So, rearrange the code a bit so that DM enabled drivers can be called during early system initialization. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | ARM: DRA7: emif: Enable interleaving for higher address spaceLokesh Vutla2016-03-14-0/+2
| | | | | | | | | | | | | | | | Given that DRA7/OMAP5 SoCs can support more than 2GB of memory, enable interleaving for this higher memory to increase performance. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | ARM: DRA7: emif: Check for enable bits before updating leveling outputLokesh Vutla2016-03-14-24/+48
| | | | | | | | | | | | | | | | | | Read and write leveling can be enabled independently. Check for these enable bits before updating the read and write leveling output values. This will allow to use the combination of software and hardware leveling. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | ARM: DRA7: emif: Fix DDR init sequence during warm resetLokesh Vutla2016-03-14-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Commit (20fae0a - ARM: DRA7: DDR: Enable SR in Power Management Control) enables Self refresh mode by default and during warm reset the EMIF contents are preserved. After warm reset EMIF sees that it is idle and puts DDR in self-refresh. When in SR, leveling operations cannot be done as DDR can only accept SR exit command, so its hanging during warm reset. In order to fix this reset the power management control register before EMIF initialization if it is a warm reset. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | ARM: DRA7: emif: Fix updating of refresh ctrl shadowLokesh Vutla2016-03-14-1/+5
| | | | | | | | | | | | | | | | On DRA7, refresh ctrl shadow should be updated with the final value. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | board: ti: AM57xx: Add detection logic for AM57xx-evmKipisz, Steven2016-03-14-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current AM57xx evm supports both BeagleBoard-X15 (http://beagleboard.org/x15) and AM57xx EVM (http://www.ti.com/tool/tmdxevm5728). The AM572x EValuation Module(EVM) provides an affordable platform to quickly start evaluation of Sitara. ARM Cortex-A15 AM57x Processors (AM5728, AM5726, AM5718, AM5716) and accelerate development for HMI, machine vision, networking, medical imaging and many other industrial applications. This EVM is based on the same BeagleBoard-X15 Chassis and adds mPCIe, mSATA, LCD, touchscreen, Camera, push button and TI's wlink8 offering. Since the EEPROM contents are compatible between the BeagleBoard-X15 and the AM57xx-evm, we add support for the detection logic to enable support for various user programmable scripting capability. NOTE: U-boot configuration is currently a superset of AM57xx evm and BeagleBoard-X15 and no additional configuration tweaking is needed. This change also sets up the stage for future support of TI AM57xx EVMs to the same base bootloader build. Signed-off-by: Steve Kipisz <s-kipisz2@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | ARM: OMAP4/5: Add generic board detection hookKipisz, Steven2016-03-14-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many TI EVMs have capability to store relevant board information such as DDR description in EEPROM. Further many pad configuration variations can occur as part of revision changes in the platform. In-order to support these at runtime, we for a board detection hook which is available for override from board files that may desire to do so. NOTE: All TI EVMs are capable of detecting board information based on early clocks that are configured. However, in case of additional needs this can be achieved within the override logic from within the board file. Signed-off-by: Steve Kipisz <s-kipisz2@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | ARM: OMAP4/5: Centralize early clock initializationKipisz, Steven2016-03-14-4/+20
|/ | | | | | | | | | | | | | | | | | | | | | | | | | Early clock initialization is currently done in two stages for OMAP4/5 SoCs. The first stage is the initialization of console clocks and then we initialize basic clocks for functionality necessary for SoC initialization and basic board functionality. By splitting up prcm_init and centralizing this clock initialization, we setup the code for follow on patches that can do board specific initialization such as board detection which will depend on these basic clocks. As part of this change, since the early clock initialization is centralized, we no longer need to expose the console clock initialization. NOTE: we change the sequence slightly by initializing console clocks timer after the io settings are complete, but this is not expected to have any functioanlity impact since we setup the basic IO drive strength initialization as part of do_io_settings. Signed-off-by: Steve Kipisz <s-kipisz2@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* omap3: Use raw SPL by default for mmc1Alexander Graf2016-03-08-2/+0
| | | | | | | | | | | Now that we fall back to the FS code path when we don't find u-boot at the raw sector offset, there is no good reason to not default to raw boot. With this patch, I can successfully boot u-boot from a raw sector offset on beagle-xm. Signed-off-by: Alexander Graf <agraf@suse.de>
* sniper: Various minor cleanups, missing Kconfig configs and reorganisationPaul Kocialkowski2016-02-29-1/+1
| | | | | | | | This introduces some minor cleanups, regarding aspects such as board name, code and headers organization as well as deprecated and missing config options. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@konsulko.com>
* Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-02-24-0/+48
|\
| * armv7: ls102xa: Move smmu and stream id initialization into the common soc codeAlison Wang2016-02-24-0/+48
| | | | | | | | | | | | | | | | The initialization for smmu and stream id is moved into the common soc code. Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | sunxi: H3: Add support for the host usb-physJelle van der Waa2016-02-23-7/+28
|/ | | | | | | | Add support for phy 1-3. Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> [hdegoede@redhat.com: use setclrbits_le32 instead of read-modify-write] Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2016-02-21-3/+177
|\
| * imx: mx7d: isolate resources to domain 0 for A7 corePeng Fan2016-02-21-0/+64
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In current design, if any peripheral was assigned to both A7 and M4, it will receive ipg_stop or ipg_wait when any of the 2 platforms enter low power mode. We will have a risk that, if A7 enter wait, M4 enter stop, peripheral will have chance to get ipg_stop and ipg_wait asserted same time. Also if M4 enters stop mode, A7 will have no chance to access the peripheral. There are 26 peripherals affected by this IC issue: SIM2(sim2/emvsim2) SIM1(sim1/emvsim1) UART1/UART2/UART3/UART4/UART5/UART6/UART7 SAI1/SAI2/SAI3 WDOG1/WDOG2/WDOG3/WDOG4 GPT1/GPT2/GPT3/GPT4 PWM1/PWM2/PWM3/PWM4 ENET1/ENET2 Software Workaround: The solution is to set the peripherals to Domain0 by A core, since A core in Domain0. The peripherals which will be used by M4, will be set to Domain1 by M4. For example, A core set WDOG4 to domain0, but when M4 boots up, M4 will set WDOG4 to domain1, because M4 will use WDOG4. So the peripherals are not shared by them. This way requires the uboot implemented the RDC driver and set the 26 IPs above to domain 0 only. M4 image will set the M4 to domain 1 and set peripheral which it will use to domain 1. This patch enables the CONFIG_IMX_RDC and CONFIG_IMX_BOOTAUX for i.MX7D SABRESD board, and setup the 26 IP resources to domain 0. Signed-off-by: Ye.Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
| * imx: mx7: implement functions to boot auxiliary corePeng Fan2016-02-21-0/+36
| | | | | | | | | | | | | | | | | | | | | | | | Implement arch_auxiliary_core_up and arch_auxiliary_core_check_up. arch_auxiliary_core_check_up is used to check whether M4 is running or not. arch_auxiliary_core_up is to boot M4 core, the m4 core will use the pc and stack which is set in arch_auxiliary_core_up to set R15 and R13 register and boot. Signed-off-by: Ye.Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
| * imx: mx6: implement functions to boot auxiliary corePeng Fan2016-02-21-0/+38
| | | | | | | | | | | | | | | | | | | | | | | | Implement arch_auxiliary_core_up and arch_auxiliary_core_check_up. arch_auxiliary_core_check_up is used to check whether M4 is running or not. arch_auxiliary_core_up is to boot M4 core, the m4 core will use the pc and stack which is set in arch_auxiliary_core_up to set R15 and R13 register and boot. Signed-off-by: Ye.Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
| * imx: mx7d: clock support for RDCPeng Fan2016-02-21-0/+6
| | | | | | | | | | | | If CONFIG_IMX_RDC is enabled, enable clock for RDC and SEMAPHORE. Signed-off-by: Peng Fan <peng.fan@nxp.com>
| * imx: mx6: Implement mmc_get_env_partSoeren Moch2016-02-21-3/+33
| | | | | | | | | | | | | | | | | | | | commit 216d286c7e3d3d83d4d8ccaf0415192e1b1040c0 [imx: mx6: implement mmc_get_env_dev] introduced selection of the environment device according to the boot device when booting from SD/MMC. Extend this functionality for also selecting the device partition. Signed-off-by: Soeren Moch <smoch@web.de>
* | OMAP3_LOGIC: Setup defconfig to enable SPL and NAND bootingAdam Ford2016-02-08-0/+1
| | | | | | | | | | | | | | | | | | | | The defconfig patch will enable the the SPL and NAND settings. The update to Kconfig will allow the SPL to configured in and built. Signed-off-by: Derald D. Woods <woods.technical@gmail.com> Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | Use correct spelling of "U-Boot"Bin Meng2016-02-06-1/+1
|/ | | | | | | | | | Correct spelling of "U-Boot" shall be used in all written text (documentation, comments in source files etc.). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
* imx: mx6: implement mmc_get_env_devPeng Fan2016-02-04-0/+32
| | | | | | | | | | Implement mmc_get_env_dev, devno can be got from smbr1 of SRC. Introduce a weak function board_mmc_get_env_dev, different boards can implement it according to different sdhc controllers that used by the board. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* imx: mx7dsabresd: move mmc_get_env_devno to soc codePeng Fan2016-02-04-0/+21
| | | | | | | | | | | Move mmc_get_env_devno to soc.c and rename to mmc_get_env_dev to match the one in common/env_mmc.c. Introduce a weak function board_mmc_get_env_dev. Different boards can implement this according to sdhc controller which is used by the board. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* imx: mx6ul/sx: Fix issue in LCDIF clock dividers calculationYe Li2016-02-02-4/+0
| | | | | | | | | | The checking with max frequency supported is not correct, because the temp is calculated by max pre and post dividers. We can decrease any divider to meet the max frequency limitation. Actually, the calculation below the codes is doing this way to find best pre and post dividers. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
* imx: mx6sx: Fix issue in LCDIF clock enablementYe Li2016-02-02-2/+2
| | | | | | | | Wrong checking for the base_addr paramter with LCDIF1 and LCDIF2. Always enter the -EINVAL return. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
* imx: mx6sxsabreauto: Add support for mx6sx SABREAUTO boardYe Li2016-02-02-0/+6
| | | | | | | Initial version for mx6sx SABREAUTO board support with features: PMIC, QSPI, NAND flash, SD/MMC, USB, Ethernet, I2C, IO Expander. Signed-off-by: Ye Li <ye.li@nxp.com>
* mx6: soc: Add ENET2 mac address supportYe Li2016-02-02-9/+23
| | | | | | | The i.MX6SX and i.MX6UL has two ENET controllers, add support for reading MAC address from fuse for ENET2. Signed-off-by: Ye Li <ye.li@nxp.com>
* arm: imx6: Add DDR3 calibration code for MX6 Q/D/DLMarek Vasut2016-02-02-0/+559
| | | | | | | | | Add DDR3 calibration code for i.MX6Q, i.MX6D and i.MX6DL. This code fine-tunes the behavior of the MMDC controller in order to improve the signal integrity and memory stability. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* arm: cache: Implement cache range check for v7Marek Vasut2016-01-31-0/+21
| | | | | | | | | | | | | Add code to aid tracking down cache alignment issues. In case DEBUG is defined in the cache.c, this code will check alignment of each attempt to flush/invalidate data cache and print a warning if the alignment is incorrect. If DEBUG is not defined, this code is optimized out. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@konsulko.com>
* Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini2016-01-28-10/+6
|\
| * arm: ls102xa: Rewrite the logic of ft_fixup_enet_phy_connect_type()Bin Meng2016-01-28-10/+6
| | | | | | | | | | | | | | | | | | eth_get_dev_by_index() is an API which is not available in driver model. Use eth_get_dev_by_name() instead, which can also simplifly the code logic a little bit. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-01-27-5/+5
|\ \
| * | arm: ls1021a: Adjust sata register default valuesTang Yuantian2016-01-25-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | Updated the default sata register values to enhance the performance and stability. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | | sunxi: Add support for LPDDR3 for A83TVishnu Patekar2016-01-26-5/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | Banana-pi M3 has LPDDR3 DRAM. this adds support for LPDDR3 for A83T. Mostly the timing parameters are different from DDR3. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | | sunxi: Groundwork to support new dram type for A83TVishnu Patekar2016-01-26-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Different A83T boards have different DRAM types. Banapi M3 has LPDDR3, Allwinner Homlet v1.2 has DDR3. This adds groundwork to support for new DRAM type for A83T. Introduce CONFIG_DRAM_TYPE, It'll be 3 for DDR3 and 7 for LPDDR3, must be set in respective board defconfig. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | | sunxi: Redundant code cleanup from a83t dram initVishnu Patekar2016-01-26-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | This removes the redundant lines of code from mctl_sys_init. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | | sunxi: Support PSCI ops on Allwinner H3Chen-Yu Tsai2016-01-26-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | H3 has the same power sequencing procedure as the A31/A31s, which includes the power clamps. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | | sunxi: Support H3 CCU security switchesChen-Yu Tsai2016-01-26-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | H3's CCU includes some switches which disable non-secure access to some of the more critical clock controls, such as MBUS, PLLs, and main platform busses. Configure them to enable non-secure access. For now the only SoC that has this feature is the H3. For other platforms just use a default (weak) empty function so things do not break. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
generated by cgit v1.1 at 2024-10-19 16:39:17 +0000