summaryrefslogtreecommitdiff
path: root/arch/arm/cpu/armv7/omap5/hwinit.c
Commit message (Expand)AuthorAgeLines
* ARM: DRA72x: Add support for detection of SR2.0Ravi Babu2016-03-27-0/+3
* omap5: omap_die_id supportPaul Kocialkowski2015-10-22-0/+8
* ARM: DRA7: Add detection of ES2.0Nishanth Menon2015-08-28-0/+3
* gpio: omap: Drop 'method' parameterTom Rini2015-08-12-8/+10
* ARM: DRA72: disable workaround for 801819Nishanth Menon2015-08-12-0/+11
* ARM: DRA7/ OMAP5: implement Auxiliary Control Register configurationNishanth Menon2015-08-12-0/+6
* am33xx: Re-enable SW levelling for DDR2Tom Rini2015-06-15-1/+2
* ARM: DRA7: Make do_set_mux32() genericLokesh Vutla2015-06-12-0/+9
* ARM: DRA7: Update DDR IO configurationLokesh Vutla2015-06-12-4/+8
* ARM: OMAP5 / DRA7: Setup L2 Aux Control Register with recommended configurationNishanth Menon2015-03-13-0/+16
* ARM: DRA7 / OMAP5: Add workaround for ARM errata 798870Praveen Rao2015-03-13-0/+7
* ARM: DRA72x: Add Silicon ID supportLokesh Vutla2014-05-23-0/+3
* sizes.h - consolidate for all architecturesAlexey Brodkin2014-03-04-1/+1
* DRA7: Add support for ES1.1 silicon ID codeNishanth Menon2014-01-24-0/+3
* ARM: OMAP5+: Remove unnecessary EFUSE settingsLokesh Vutla2013-12-04-6/+0
* ARM: DRA: EMIF: Change DDR3 settings to use hw levelingSRICHARAN R2013-12-04-4/+8
* Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk2013-07-24-17/+1
* ARM: OMAP: GPIO: Fix valid range and enable usage of all GPIOs on OMAP5Axel Lin2013-07-02-1/+3
* ARM: DRA7xx: EMIF: Change settings required for EVM boardSricharan R2013-06-10-7/+12
* ARM: DRA7xx: Do not enable srcomp for DRA7xx Soc'sLokesh Vutla2013-06-10-0/+3
* ARM: OMAP2+: Rename asm/arch/clocks.h asm/arch/clock.hLokesh Vutla2013-06-10-1/+1
* ARM: OMAP4/5: Make OMAPx_SRAM_SCRATCH_ defines commonSRICHARAN R2013-05-10-1/+2
* ARM: OMAP5: Fix warm reset with USB cable connectedLokesh Vutla2013-05-10-0/+19
* arm: dra7xx: Add silicon id support for DRA752 socLokesh Vutla2013-03-11-0/+3
* arm: dra7xx: clock: Add the prcm changesLokesh Vutla2013-03-11-2/+7
* ARM: OMAP5: srcomp: enable slew rate compensation cells after powerupLokesh Vutla2013-03-11-0/+116
* ARM: OMAP5: Add silicon id support for ES2.0 revision.SRICHARAN R2013-03-11-11/+16
* ARM: OMAP5: Clean up iosettings codeLokesh Vutla2013-03-11-44/+31
* ARM: OMAP4+: Make control module register structure genericLokesh Vutla2013-03-11-56/+46
* ARM: OMAP4+: emif: Detect SDRAM from SDRAM config registerLokesh Vutla2013-03-11-1/+1
* OMAP5: EMIF: Add support for DDR3 deviceLokesh Vutla2012-07-07-0/+15
* OMAP5: Configure the io settings for omap5432 uevm boardLokesh Vutla2012-07-07-19/+79
* OMAP5: ADD chip detection for OMAP5432 SOCLokesh Vutla2012-07-07-1/+9
* OMAP5: reset: Use cold reset in case of 5430ES1.0SRICHARAN R2012-05-15-0/+14
* OMAP4/5: Make the sysctrl structure commonSRICHARAN R2012-05-15-2/+2
* OMAP4/5: Make the silicon revision variable common.SRICHARAN R2012-05-15-3/+3
* OMAP5: hwinit: Add the missing break statementSRICHARAN R2012-05-15-0/+1
* OMAP5: io: Configure the io settings for omap5430 sevm board.SRICHARAN R2012-05-15-0/+83
* omap5: Add minimal support for omap5430.Sricharan2011-11-15-0/+78