summaryrefslogtreecommitdiff
path: root/arch/arm/cpu/armv7/mx6
Commit message (Expand)AuthorAgeLines
* MLK-10674-2 imx: mx6qp settings for PREPeng Fan2017-04-05-2/+31
* MLK-10576 ARM: i.MX6: exclude the ARM errata from i.MX6 UP systemNitin Garg2017-04-05-5/+0
* MLK-10524: iMX6x: Implement workaround for Cortex-A9 errata 845369Nitin Garg2017-04-05-0/+1
* ENGR00325255 pcie:enable pcie support on imx6sx sdYe Li2017-04-05-5/+32
* ENGR00319965 pcie: mask the imx6sl outRichard Zhu2017-04-05-15/+20
* ENGR00319415 pcie: random link down issue after warm-rstRichard Zhu2017-04-05-0/+18
* MLK-11064 imx: mx6qp: Adjust AQos settings for peripheralsYe.Li2017-04-05-0/+3
* MLK-12534 mx6: shutdown vddpu and PCIE phy to save powerYe Li2017-04-05-0/+42
* MLK-12533 mx6sx: select OSC as uart's clk parentYe Li2017-04-05-0/+13
* ENGR00321299 gis: clean csi0 input mux set bit in GPRSandor Yu2017-04-05-0/+6
* ENGR00315894-77 mx6 soc: Add vadc power up/down functionYe.Li2017-04-05-0/+46
* ENGR00315894-76 mx6 clock: Add vadc clock enable functionYe.Li2017-04-05-0/+12
* MLK-12437-1 mx6sx: Add support for LVDS displayYe Li2017-04-05-1/+60
* MLK-12434-9: mx6: define CONFIG_BOARD_LATE_INITPeng Fan2017-04-05-0/+5
* MLK-11528 imx: mx6ul check fuse before init beePeng Fan2017-03-14-1/+11
* MLK-10958 imx: mx6ul support Bus Encryption EnginePeng Fan2017-03-14-1/+463
* ARM: Migrate errata to KconfigTom Rini2017-03-09-0/+4
* flash: complete CONFIG_SYS_NO_FLASH move with renamingMasahiro Yamada2017-02-12-1/+1
* BOARD: MCCMON6: Provide support for iMX6q based mccmon6 boardLukasz Majewski2017-01-30-0/+5
* ARM: imx6ul: Move liteSOM source to SoC directoryMarcin Niestroj2017-01-27-1/+209
* Convert CONFIG_BOARD_EARLY_INIT_F to KconfigSimon Glass2017-01-25-0/+4
* Kconfig: Migrate BOARD_LATE_INIT to a selectTom Rini2017-01-24-0/+30
* imx6: icorem6_rqs: Add FEC supportJagan Teki2016-12-16-0/+1
* imx6: geam6ul: Add FEC supportJagan Teki2016-12-16-0/+1
* imx6: icorem6_rqs: Add I2C supportJagan Teki2016-12-16-0/+1
* arm: imx6q: Add Engicam i.CoreM6 Quad/Dual RQS Starter Kit initial supportJagan Teki2016-12-16-0/+11
* imx6: geam6ul: Add I2C supportJagan Teki2016-12-16-0/+1
* arm: imx6ul: Add Engicam GEAM6UL Starter Kit initial supportJagan Teki2016-12-16-0/+11
* imx6: icorem6: Add I2C supportJagan Teki2016-12-16-0/+1
* icorem6: Use CONFIG_DM_ETH supportJagan Teki2016-12-16-0/+1
* arm: imx: add i.MX6SLL EVK board supportPeng Fan2016-12-16-0/+7
* imx: mx6sll: add Kconfig entry for i.MX6SLLPeng Fan2016-12-16-0/+4
* imx: mx6sll: add clock supportPeng Fan2016-12-16-7/+21
* imx: clock: gate clk before changing pix clk muxPeng Fan2016-12-16-20/+30
* imx: mx6sl: add lcdif clock supportPeng Fan2016-12-16-19/+59
* imx: mx6: lcdif: gate clock before changing muxPeng Fan2016-12-16-0/+10
* imx: mx6: fix mmdc ch0 clk for 6SLPeng Fan2016-12-16-0/+5
* board/liteboard: Add support for liteBoardMarcin Niestroj2016-12-16-0/+5
* udoo_neo: Add thermal supportBreno Lima2016-12-16-0/+2
* udoo_neo: Move MX6SX configuration to KconfigBreno Lima2016-12-16-0/+1
* arm: imx: initial support for colibri imx6Max Krummenacher2016-12-16-0/+8
* arm: imx: initial support for apalis imx6Max Krummenacher2016-12-16-0/+8
* imx6: clock: Enable External Memory Interface [EIM] clock (eim_slow_clock)Lukasz Majewski2016-11-30-0/+14
* mx6sx: Add initial support for Samtec VIN|ING 2000 boardChristoph Fritz2016-11-30-0/+7
* mx6sx: Add initial support for UDOO Neo BoardBreno Lima2016-11-29-0/+5
* ARM: mx6: ddr: use Kconfig for inclusion of DDR calibration routinesEric Nelson2016-11-29-2/+9
* mx6: ddr: add routine to return DDR calibration dataEric Nelson2016-11-29-0/+23
* mx6: ddr: pass mx6_ddr_sysinfo to calibration routinesEric Nelson2016-11-29-42/+56
* mx6: ddr: allow 32 cycles for DQS gating calibrationEric Nelson2016-11-29-0/+7
* imx: mx6ull: update the REFTOP_VBGADJ settingPeng Fan2016-11-16-5/+26
generated by cgit v1.1 at 2024-09-04 21:18:46 +0000