summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* ppc4xx: Fix bug in PCI outbound map configuration for canyonlandsAnatolij Gustschin2009-03-20-2/+4
| | | | | | | | | | | | | | PCI outbound address map configuration doesn't match the PCI memory address range covered by appropriate TLB entry configuration for canyonlands causing machine check exceptions while accessing PCI memory regions. This patch provides a fix for this issue. Kazuaki Ichinohe observed and reported this issue while testing display output with PCI ATI video card on canyonlands. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
* CFI: geometry reversal for STMicro M29W320DTRichard Retanubun2009-03-19-2/+3
| | | | | | | | Follow up to the flash_fixup_stm to fix geometry reversal on STMicro M29W320ET flash chip. The M29W320DT has 4 erase region. Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com> Signed-off-by: Stefan Roese <sr@denx.de>
* smc911x_eeprom: update register APIMike Frysinger2009-03-19-13/+15
| | | | | | | | The smc911x driver changed the naming convention for its register funcs, so update the eeprom code accordingly. Signed-off-by: Mike Frysinger <vapier@gentoo.org> CC: Ben Warren <biggerbadderben@gmail.com>
* mpc52xx: Get rid of board-specific #ifdef's in cpu/mpc5xxx/ide.cGrzegorz Bernacki2009-03-18-1/+2
| | | | | | | | | | Total5200 and digsy MTC use I2C port 2 pins as a ATA chip select. To avoid adding board-specific ifdefs to cpu/mpc5xxx/ide.c new define CONFIG_SYS_ATA_CS_ON_I2C2 was introduced. It is used by Total5200 and will be used by digsy MTC and other boards with ATA CS on I2C pins. Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
* 8xx: add support for new keymile kmsupx4 board.Heiko Schocher2009-03-18-12/+93
| | | | | | | | | | | | | This patch adds support for the kmsupx4 board from Keymile, based on a Freescale MPC852T CPU - serial console on SMC1 - 32 MB SDRAM - 32 MB NOR Flash - Ethernet over SCC3 - I2C Bitbang Signed-off-by: Heiko Schocher <hs@denx.de>
* 8xx, mgsuvd: rename board to a more generic nameHeiko Schocher2009-03-18-291/+327
| | | | | | | | | renaming the "mgsuvd" board port into "km8xx", because there come more similar boards from keymile. Compiling the mgsuvd board with "make mgsuvd_config" remains. Signed-off-by: Heiko Schocher <hs@denx.de>
* 8xx, mgsuvd: Coding Style cleanup config fileHeiko Schocher2009-03-18-26/+31
| | | | Signed-off-by: Heiko Schocher <hs@denx.de>
* powerpc: common updates for keymile boardsHeiko Schocher2009-03-18-139/+189
| | | | | | | | | | | | | | - added to keymile-common.h: - bootcount support - COMMAND HISTORY - CONFIG_AUTO_COMPLETE - CONFIG_SYS_FLASH_PROTECTION - JFFS2 support - CONFIG_VERSION_VARIABLE - extracted common I2C settings for all boards - common default environment settings summarized Signed-off-by: Heiko Schocher <hs@denx.de>
* 8xx, icache: enabling ICache not before running from RAMHeiko Schocher2009-03-18-3/+16
| | | | | | | with the new CONFIG_SYS_DELAYED_ICACHE config option, ICache is not enabled before code runs from RAM. Signed-off-by: Heiko Schocher <hs@denx.de>
* 82xx, mgcoge: fix environment sector sizeHeiko Schocher2009-03-18-1/+1
| | | | | | Size of one environment sector is 0x20000. Signed-off-by: Heiko Schocher <hs@denx.de>
* NetStar: config reindentationLadislav Michl2009-03-18-19/+13
| | | | | | Fix indentation broken by symbol renames. "Sort" driver related definitons. Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
* Merge branch 'master' of git://git.denx.de/u-boot-coldfireWolfgang Denk2009-03-18-17/+33
|\
| * ColdFire: Fix incorrect definitionTsiChung Liew2009-03-17-0/+4
| | | | | | | | Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
| * ColdFire: Fix M5329EVB and M5373EVB nand issueTsiChung Liew2009-03-17-4/+8
| | | | | | | | | | | | | | | | The Nand flash was unable to read and write properly due to Nand Chip Select (nCE) setup was in reverse order. Also, increase the Nand time out value to 60. Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
| * ColdFire: PLATFORM_CPPFLAGS updates for new compilerTsiChung Liew2009-03-17-7/+7
| | | | | | | | | | | | | | Update PLATFORM_CPPFLAGS to accept 4.3.x version of ColdFire compiler. Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
| * ColdFire: Provide gzip image size V2 & V3 platformsTsiChung Liew2009-03-17-1/+9
| | | | | | | | | | | | | | Default gzip bootm size is 8MB. Some platforms require more than 8MB Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
| * ColdFire: Fix M54451 serial boot dram setupTsiChung Liew2009-03-17-2/+2
| | | | | | | | | | | | | | | | The serial boot dram extended/standard mode register was not setup and was using default DRAM setup causing the U-boot was unstable to boot up in serial mode. Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
| * Coldfire: XL Bus minor fixesarun c2009-03-17-3/+3
| | | | | | | | | | | | | | According to coldfire manual data timeout > address time out also use correct macro to program XARB_CFG Signed-off-by: Arun C <arunedarath@mistralsolutions.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-nand-flashWolfgang Denk2009-03-18-4/+3
|\ \
| * | NAND: Have nboot accept .e and .i as legacy no-ops.Scott Wood2009-03-17-1/+1
| | | | | | | | | | | | | | | | | | This was intended to happen before, but a trivial bug prevented it. Signed-off-by: Scott Wood <scottwood@freescale.com>
| * | NAND: Make nboot skip bad blocksLadislav Michl2009-03-17-3/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | nboot command currently does not skip bad blocks and gives read error when loading image stored over bad block. With patch applied, nboot works as expected: Device 0 bad blocks: 00780000 014a0000 02000000 02cc0000 04aa0000 Loading from NAND 128MiB 3,3V 8-bit, offset 0x2c00000 Image Name: Linux-2.6.22-omap1 Created: 2008-11-20 23:44:32 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1052520 Bytes = 1 MB Load Address: 10008000 Entry Point: 10008000 Skipping bad block 0x02cc0000 Automatic boot of image at addr 0x10400000 ... ... Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Scott Wood <scottwood@freescale.com>
* | ppc4xx: lwmon5: Only use one CS (rank) in DDR2 configurationStefan Roese2009-03-17-45/+1
| | | | | | | | | | | | | | | | | | | | | | This patch fixes a problem spotted by Mikhail Zolotaryov on Sequoia with the DDR2 configuration to only use one CS (rank). As this code is most likely copied from the original Sequoia version, this error was copied as well. This patch also removes some dead code. Signed-off-by: Stefan Roese <sr@denx.de>
* | ppc4xx: PMC440: Only use one CS (rank) in DDR2 configurationStefan Roese2009-03-17-1/+1
| | | | | | | | | | | | | | | | | | This patch fixes a problem spotted by Mikhail Zolotaryov on Sequoia with the DDR2 configuration to only use one CS (rank). As this code is most likely copied from the original Sequoia version, this error was copied as well. Signed-off-by: Stefan Roese <sr@denx.de>
* | Fix AMCC Sequoia board DDR memory configurationMikhail Zolotaryov2009-03-17-1/+1
|/ | | | | | | | | | | | | | | Sequoia board schematics (DES0211_11_SCH_11.pdf, page 5, unit U1D) specifies that BankSel#1 is not connected, while bootloader memory configuration is (board/amcc/sequoia/sdram.c): mtsdram(DDR0_10, 0x00000300); i.e. both Chip Selects used - not correct. If we change to correct value here: mtsdram(DDR0_10, 0x00000100); memory is accessible OK also. Signed-off-by: Mikhail Zolotaryov <lebon@lebon.org.ua> Signed-off-by: Stefan Roese <sr@denx.de>
* Prepare 2009.03-rc2v2009.03-rc2Wolfgang Denk2009-03-15-2/+755
| | | | | | Update CHANEGLOG, fix minor coding style issue. Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-shWolfgang Denk2009-03-15-121/+493
|\
| * sh: ap325rxa: Change the wait cycle in the area 5Yusuke.Goda2009-03-13-1/+1
| | | | | | | | | | Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * sh: Fix cannot work rtl8139 on r2dplusYoshihiro Shimoda2009-03-12-0/+3
| | | | | | | | | | | | | | | | The rtl8139 driver use pci_mem_to_phys. So it need PCI system memory registration. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * sh: Add netdev header fixing of warning/buildNobuhiro Iwamatsu2009-03-12-0/+1
| | | | | | | | | | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * sh: Add support 32-Bit Extended Address Mode to sh7785lcrYoshihiro Shimoda2009-03-12-4/+399
| | | | | | | | | | | | | | | | We can built 'make sh7785lcr_32bit_config'. And add new command "pmb" for this mode. This command changes PMB for using 512MB system memory. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * sh: Add some register value configurable to PCI of SH7780Yoshihiro Shimoda2009-03-12-3/+9
| | | | | | | | | | | | | | | | Some register value was hardcoded for System memory size 128MB and memory offset 0x08000000. This patch fixed the problem. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * sh: Add system memory registration to PCI for SH4Yoshihiro Shimoda2009-03-12-0/+10
| | | | | | | | | | | | | | It is necessary for some pci device driver. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * sh: Add value for PCI system memory registration of sh7785lcrYoshihiro Shimoda2009-03-12-0/+4
| | | | | | | | | | Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * sh: Add macros for SH-4A 32-Bit Address Extended ModeYoshihiro Shimoda2009-03-12-0/+25
| | | | | | | | | | Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * sh: use write{8,16,32} in ms7720se lowlevel_initNobuhiro Iwamatsu2009-03-12-114/+42
| | | | | | | | | | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-mpc83xxWolfgang Denk2009-03-15-7/+11
|\ \
| * | mpc83xx: Add bank configuration to FSL spd_sdram.cJerry Van Baren2009-03-14-6/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | The routine assumed 4 bank SDRAMs, enhance to configure for 4 or 8 bank SDRAMs. Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> Acked-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * | mpc83xx: correctly set encryption and I2C bus 0 clockNorbert van Bolhuis2009-03-14-1/+1
| |/ | | | | | | | | | | | | | | | | | | This patch makes sure the correct mask is applied when setting the encryption and I2C bus 0 clock in SCCR. Failing to do so may lead to ENCCM being 0 in which case I2C bus 0 won't function. Signed-off-by: Norbert van Bolhuis <nvbolhuis@aimvalley.nl> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2009-03-15-0/+50
|\ \
| * | OMAP3: Add support for OMAP3 die IDDirk Behme2009-03-13-0/+50
| |/ | | | | | | | | | | Read and store OMAP3 die ID in U-Boot environment. Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-pxaWolfgang Denk2009-03-15-22/+24
|\ \
| * | PXA: timer use do_div and simplify itJean-Christophe PLAGNIOL-VILLARD2009-03-09-22/+24
| | | | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* | | MPC5200 FEC MII speed registerJon Smirl2009-03-13-7/+16
| |/ |/| | | | | | | | | Set a non-zero speed in the MII register so that MII commands will work. Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk2009-03-10-10/+6
|\ \
| * | tsec: report when there is no vendor specific PHY supportPaul Gortmaker2009-03-09-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit af1c2b84 added a generic phy support, with an ID of zero and a 32 bit mask; meaning that it will match on any PHY ID. The problem is that there is a test that checked if a matching PHY was found, and if not, it printed the non-matching ID. But since there will always be a match (on the generic PHY, worst case), this test will never trip. In the case of a misconfigured PHY address, or of a PHY that isn't explicitly supported outside of the generic support, you will never see the ID of 0xffffffff, or the ID of the real (but unsupported) chip. It will silently fall through onto the generic support. This change makes that test useful again, and ensures that the selection of generic PHY support doesn't happen without some sort of notice. It also makes it explicitly clear that the generic PHY must be last in the PHY table. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Andy Fleming <afleming@freescale.com>
| * | Add eTSEC 1/2 IO override control (corrected)ksi@koi8.net2009-03-09-1/+1
| | | | | | | | | | | | | | | | | | This adds tsec12ioovcr to include/asm-ppc/immap_85xx.h (was reserved.) Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
| * | fsl: Remove unnecessary debug printfsAndy Fleming2009-03-09-3/+0
| | | | | | | | | | | | | | | | | | | | | These were left in accidentally, and are not really useful unless the code is as broken as it was when it was being developed. Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | Fix mpc85xx ddr-gen3 ddr_sdram_cfg.Ed Swarthout2009-03-09-2/+2
| |/ | | | | | | | | | | | | Commit e1be0d25, "32bit BUg fix for DDR2 on 8572" prevented other sdram_cfg bits (such as ecc and self_refresh_in_sleep) from being set. Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-mpc83xxWolfgang Denk2009-03-10-0/+0
|\ \
| * | SIMPC8313 board: fix out of tree building.Wolfgang Denk2009-03-09-9/+18
| |/ | | | | | | | | | | | | | | | | | | Fix typo in makefile which broke out of tree builds. Also use expolicit "rm" instead of "ln -sf" which is known to be unreliable. Signed-off-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
generated by cgit v1.1 at 2024-11-20 17:05:52 +0000