summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* include/linux/fb.h: Add a missing include for 'list.h'Otavio Salvador2013-10-07-0/+1
| | | | | | | | | | | | | | | | | The modelist data uses the list definition but the 'list.h' header were not being included. The build failure is bellow: ,---- | In file included from yyyy.c:16:0: | .../u-boot/include/linux/fb.h:503:19: error: field 'modelist' has incomplete type | struct list_head modelist; /* mode list */ | ^ | make[1]: *** [yyyy.o] Error 1 | make[1]: Leaving directory `.../u-boot/board/xxx/yyyy' | make: *** [board/xxx/yyyy/libyyyy.o] Error 2 `---- Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* mtd: Fix function description in part_validate commentOtavio Salvador2013-10-07-4/+3
| | | | | | | | The part_validate comment had a wrong description of the actions it does and referenced to non-existent functions while in fact it calls 'part_validate_eraseblock()'. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* power:pmic: prevent data abort for pmic bat commandPiotr Wilczek2013-10-07-8/+11
| | | | | | | | | | This patch prevents data abort when pmic bat command is called on non-batery pmic device. Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Lukasz Majewski <l.majewski@samsung.com> CC: Minkyu Kang <mk7.kang@samsung.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-10-04-2/+476
|\
| * ARM: VExpress: enable ARMv7 virt support for VExpress A15Andre Przywara2013-10-03-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To enable hypervisors utilizing the ARMv7 virtualization extension on the Versatile Express board with the A15 core tile, we add the required configuration variable. Also we define the board specific smp_set_cpu_boot_addr() function to set the start address for secondary cores in the VExpress specific manner. There is no need to provide a custom smp_waitloop() function here. This also serves as an example for what to do when adding support for new boards. Signed-off-by: Andre Przywara <andre.przywara@linaro.org>
| * ARM: extend non-secure switch to also go into HYP modeAndre Przywara2013-10-03-9/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For the KVM and XEN hypervisors to be usable, we need to enter the kernel in HYP mode. Now that we already are in non-secure state, HYP mode switching is within short reach. While doing the non-secure switch, we have to enable the HVC instruction and setup the HYP mode HVBAR (while still secure). The actual switch is done by dropping back from a HYP mode handler without actually leaving HYP mode, so we introduce a new handler routine in our new secure exception vector table. In the assembly switching routine we save and restore the banked LR and SP registers around the hypercall to do the actual HYP mode switch. The C routine first checks whether we are in HYP mode already and also whether the virtualization extensions are available. It also checks whether the HYP mode switch was finally successful. The bootm command part only calls the new function after the non-secure switch. Signed-off-by: Andre Przywara <andre.przywara@linaro.org>
| * ARM: add SMP support for non-secure switchAndre Przywara2013-10-03-1/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the non-secure switch is only done for the boot processor. To enable full SMP support, we have to switch all secondary cores into non-secure state also. So we add an entry point for secondary CPUs coming out of low-power state and make sure we put them into WFI again after having switched to non-secure state. For this we acknowledge and EOI the wake-up IPI, then go into WFI. Once being kicked out of it later, we sanity check that the start address has actually been changed (since another attempt to switch to non-secure would block the core) and jump to the new address. The actual CPU kick is done by sending an inter-processor interrupt via the GIC to all CPU interfaces except the requesting processor. The secondary cores will then setup their respective GIC CPU interface. While this approach is pretty universal across several ARMv7 boards, we make this function weak in case someone needs to tweak this for a specific board. The way of setting the secondary's start address is board specific, but mostly different only in the actual SMP pen address, so we also provide a weak default implementation and just depend on the proper address to be set in the config file. Signed-off-by: Andre Przywara <andre.przywara@linaro.org>
| * ARM: trigger non-secure state switch during bootm executionAndre Przywara2013-10-03-0/+13
| | | | | | | | | | | | | | | | | | To actually trigger the non-secure switch we just implemented, call the switching routine from within the bootm command implementation. This way we automatically enable this feature without further user intervention. Signed-off-by: Andre Przywara <andre.przywara@linaro.org>
| * ARM: add C function to switch to non-secure stateAndre Przywara2013-10-03-0/+126
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The core specific part of the work is done in the assembly routine in nonsec_virt.S, introduced with the previous patch, but for the full glory we need to setup the GIC distributor interface once for the whole system, which is done in C here. The routine is placed in arch/arm/cpu/armv7 to allow easy access from other ARMv7 boards. We check the availability of the security extensions first. Since we need a safe way to access the GIC, we use the PERIPHBASE registers on Cortex-A15 and A7 CPUs and do some sanity checks. Boards not implementing the CBAR can override this value via a configuration file variable. Then we actually do the GIC enablement: a) enable the GIC distributor, both for non-secure and secure state (GICD_CTLR[1:0] = 11b) b) allow all interrupts to be handled from non-secure state (GICD_IGROUPRn = 0xFFFFFFFF) The core specific GIC setup is then done in the assembly routine. Signed-off-by: Andre Przywara <andre.przywara@linaro.org>
| * ARM: add assembly routine to switch to non-secure stateAndre Przywara2013-10-03-2/+125
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While actually switching to non-secure state is one thing, another part of this process is to make sure that we still have full access to the interrupt controller (GIC). The GIC is fully aware of secure vs. non-secure state, some registers are banked, others may be configured to be accessible from secure state only. To be as generic as possible, we get the GIC memory mapped address based on the PERIPHBASE value in the CBAR register. Since this register is not architecturally defined, we check the MIDR before to be from an A15 or A7. For CPUs not having the CBAR or boards with wrong information herein we allow providing the base address as a configuration variable. Now that we know the GIC address, we: a) allow private interrupts to be delivered to the core (GICD_IGROUPR0 = 0xFFFFFFFF) b) enable the CPU interface (GICC_CTLR[0] = 1) c) set the priority filter to allow non-secure interrupts (GICC_PMR = 0xFF) Also we allow access to all coprocessor interfaces from non-secure state by writing the appropriate bits in the NSACR register. The generic timer base frequency register is only accessible from secure state, so we have to program it now. Actually this should be done from primary firmware before, but some boards seems to omit this, so if needed we do this here with a board specific value. The Versatile Express board does not need this, so we remove the frequency from the configuration file here. After having switched to non-secure state, we also enable the non-secure GIC CPU interface, since this register is banked. Since we need to call this routine also directly from the smp_pen later (where we don't have any stack), we can only use caller saved registers r0-r3 and r12 to not mess with the compiler. Signed-off-by: Andre Przywara <andre.przywara@linaro.org>
| * ARM: add secure monitor handler to switch to non-secure stateAndre Przywara2013-10-03-0/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | A prerequisite for using virtualization is to be in HYP mode, which requires the CPU to be in non-secure state first. Add a new file in arch/arm/cpu/armv7 to hold a monitor handler routine which switches the CPU to non-secure state by setting the NS and associated bits. According to the ARM architecture reference manual this should not be done in SVC mode, so we have to setup a SMC handler for this. We create a new vector table to avoid interference with other boards. The MVBAR register will be programmed later just before the smc call. Signed-off-by: Andre Przywara <andre.przywara@linaro.org>
| * ARM: prepare armv7.h to be included from assembly sourceAndre Przywara2013-10-03-1/+5
| | | | | | | | | | | | | | | | armv7.h contains some useful constants, but also C prototypes. To include it also in assembly files, protect the non-assembly part appropriately. Signed-off-by: Andre Przywara <andre.przywara@linaro.org>
* | Prepare v2013.04-rc4Tom Rini2013-10-02-1/+1
| | | | | | | | Signed-off-by: Tom Rini <trini@ti.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-10-02-1569/+3918
|\ \ | |/
| * Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2013-10-02-93/+3269
| |\
| | * i.MX6DQ/DLS: Add pad MX6_PAD_GPIO_1__USB_OTG_IDEric Nelson2013-09-27-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds the pad to i.MX6DQ and changes the i.MX6DLS declaration to match the Linux kernel declaration. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Marek Vasut <marex@denx.de>
| | * mx6: Fix use of improper value in enable_ipu_clockPierre Aubert2013-09-27-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The value MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET that was used to initialize the CCGR3 register caused an undefined value for CG0. Signed-off-by: Pierre Aubert <p.aubert@staubli.com> CC: Stefano Babic <sbabic@denx.de> Acked-by: Eric Nelson <eric.nelson@boundarydevices.com>
| | * mx35pdk: Fix error handling in board_late_init()Fabio Estevam2013-09-27-6/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | If smc911x_initialize() fails we should return the error immediately. While at it, also check the error from cpu_eth_init(). Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
| | * mx28evk: Propagate the error if cpu_eth_init() failsFabio Estevam2013-09-27-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | If cpu_eth_init() fails we should return the error immediately. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de>
| | * mx28evk: Propagate the error if cpu_eth_init() failsFabio Estevam2013-09-27-0/+2
| | | | | | | | | | | | | | | | | | If cpu_eth_init() fails we should return the error immediately. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * tools/imximage.c: Fix compiling warningYork Sun2013-09-27-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert set_hdr_func(struct imx_header *imxhdr) to set_hdr_func(void) to get rid of the warning warning: ‘imxhdr’ is used uninitialized in this function Signed-off-by: York Sun <yorksun@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
| | * net: fec_mxc: Fix timeouts during tftp transferFabio Estevam2013-09-20-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Performing tftp transfers on mx28 results in random timeouts. Hector Palacios and Robert Hodaszi analyzed the root cause being related to the wrong alignment of the 'buff' buffer inside fec_recv(). Benoît Thébaudeau provided an excellent analysis of the alignment bug that is present on older versions, such as GCC 4.5.4: http://marc.info/?l=u-boot&m=137942904906131&w=2 Use ALLOC_CACHE_ALIGN_BUFFER() to avoid alignment issues from older GCC versions. Reported-by: Hector Palacios <hector.palacios@digi.com> Tested-by: Oliver Metz <oliver@freetz.org> Tested-by: Hector Palacios <hector.palacios@digi.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de> Tested-by: Marek Vasut <marex@denx.de>
| | * mx6sabresd: Fix the fdt file for the mx6dl versionFabio Estevam2013-09-20-0/+4
| | | | | | | | | | | | | | | | | | | | | We need to load 'imx6dl-sabresd.dtb' in the mx6dl version. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
| | * doc: README.mxs: Add instruction to install 'libssl-dev'Fabio Estevam2013-09-20-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit bce883707 (ARM: mxs: tools: Add mkimage support for MXS bootstream) the following build error is seen when doing a MAKEALL build: $ ./MAKEALL mx28evk Configuring for mx28evk - Board: mx28evk, Options: ENV_IS_IN_MMC mxsimage.c:18:25: fatal error: openssl/evp.h: No such file or directory Add an entry about the need of installing the 'libssl-dev' package. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de>
| | * mx28evk: Fix checkpatch warningFabio Estevam2013-09-20-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the following checkpatch warning: $ ./tools/checkpatch.pl -F board/freescale/mx28evk/mx28evk.c CHECK: Alignment should match open parenthesis #109: FILE: freescale/mx28evk/mx28evk.c:109: + writel(CLKCTRL_ENET_TIME_SEL_RMII_CLK | CLKCTRL_ENET_CLK_OUT_EN, + &clkctrl_regs->hw_clkctrl_enet); Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * i.MX6DL/S: add drive-strength back to pads DISP0_DAT2/DAT10Eric Nelson2013-09-20-2/+2
| | | | | | | | | | | | | | | | | | | | | This patch fixes a regression introduced by commit 87d720e0. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
| | * mx6slevk: Add Ethernet supportFabio Estevam2013-09-20-0/+130
| | | | | | | | | | | | | | | | | | | | | | | | mx6slevk has a SMSC8720 connected in RMII mode. Add support for it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * net: fec_mxc: Add support for mx6 solo-liteFabio Estevam2013-09-20-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Similarly as mx25 and mx53, mx6solo-lite needs to setup the MII gasket for RMII mode. Add support for mx6solo-lite. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * mx6qsabreauto: Return error if cpu_eth_init() failsFabio Estevam2013-09-20-1/+1
| | | | | | | | | | | | | | | | | | | | | Currently board_eth_init() always return 0, but we should propagate the error when cpu_eth_init() fails. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * mx6sabresd: Return error if cpu_eth_init() failsFabio Estevam2013-09-20-1/+1
| | | | | | | | | | | | | | | | | | | | | Currently board_eth_init() always return 0, but we should propagate the error when cpu_eth_init() fails. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * mx35pdk: Remove CONFIG_SYS_CACHELINE_SIZEFabio Estevam2013-09-20-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In arch/arm/cpu/arm1136/cpu.c we have: #ifndef CONFIG_SYS_CACHELINE_SIZE #define CONFIG_SYS_CACHELINE_SIZE 32 #endif ,so there is no need to define 'CONFIG_SYS_CACHELINE_SIZE' with the default size in the board config file. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * mmc: fsl_esdhc: Check the result from malloc()Fabio Estevam2013-09-20-0/+2
| | | | | | | | | | | | | | | | | | malloc can fail, so we should better check its return value before using it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * mx6sabresd: Reset counter to prevent error messageFabio Estevam2013-09-20-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a HDMI cable is not connected, the following message is seen on boot: CPU: Freescale i.MX6Q rev1.1 at 792 MHz Reset cause: POR Board: MX6-SabreSD DRAM: 1 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 No panel detected: default to HDMI unsupported panel HDMI Reset the 'i' variable to fix the 'unsupported panel' message. This follows the same idea of commit 47ac53d7ae (imx: nitrogen6x/mx6qsabrelite: Fix bug in board_video_skip). Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * mx6sabresd: Avoid hang when HDMI cable is not connectedFabio Estevam2013-09-20-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit d9b894603 (mx6sabresd: Add LVDS splash screen support) the following hang happens if the HDMI cable is not connected or the 'panel' variable is not set: U-Boot 2013.10-rc2-12978-g47ac53d-dirty (Sep 11 2013 - 15:07:38) CPU: Freescale i.MX6Q rev1.2 at 792 MHz Reset cause: POR Board: MX6-SabreSD DRAM: 1 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 ... Provide a check to 'dev->detect' in order to prevent the hang. Reported-by: Pardeep Kumar Singla <b45784@freescale.com> Suggested-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * ARM: arch-mx6: fix PLL2_PFD2_FREQMarkus Niebel2013-09-20-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | according to the manual frequency of PLL2 PFD2 is 396.000.000 instead of 400.000.000 Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de> Acked-by: Stefano Babic <sbabic@denx.de>
| | * wandboard: Use imx6dl-wandboard.dtb for the solo versionFabio Estevam2013-09-20-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | The wandboard solo version should boot the 'imx6dl-wandboard.dtb' file, since dual-lite and solo variants are the same SoC with only the number of cores being different. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * Merge branch 'master' of git://git.denx.de/u-boot-armStefano Babic2013-09-13-2852/+2666
| | |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: MAINTAINERS boards.cfg Signed-off-by: Stefano Babic <sbabic@denx.de>
| | * | apf27: add FPGA support for the apf27 boardtrem2013-09-11-0/+271
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr> Signed-off-by: Eric Jarrige <eric.jarrige@armadeus.org> Acked-by: Stefano Babic <sbabic@denx.de>
| | * | apf27: add support for the armadeus APF27 boardtrem2013-09-11-0/+1318
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr> Signed-off-by: Eric Jarrige <eric.jarrige@armadeus.org> Signed-off-by: Nicolas Colombain <nicolas.colombain@armadeus.com>
| | * | mxs_nand: Fix ECC strength for NAND flash with OOB size of 224Elie De Brauwer2013-09-11-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On a board with an i.mx28 and a Micron MT29F4G08ABAEAH4, Linux says: NAND device: Manufacturer ID: 0x2c, Chip ID: 0xdc (Micron MT29F4G08ABAEAH4), 512MiB, page size: 4096, OOB size: 224) the ECC strength is 16. root@(none):/sys/devices/virtual/mtd/mtd0# for i in ecc_strength oobsize subpagesize; do echo $i = `cat $i`; done ecc_strength = 16 oobsize = 224 subpagesize = 4096 The ECC strength was not properly discovered by U-Boot causing the data written by Linux to return an -74 (EBADMSG) when read from U-Boot. This patch fixes mxs_nand_get_ecc_strength() to function in case of a NAND flash with page_data_size = 4096 and page_oob_size= 224. Signed-off-by: Elie De Brauwer <eliedebrauwer@gmail.com> Acked-by: Scott Wood <scottwood@freescale.com>
| | * | imx: nitrogen6x/mx6qsabrelite: Fix bug in board_video_skipRobert Winkler2013-09-10-1/+3
| | | | | | | | | | | | | | | | Signed-off-by: Robert Winkler <robert.winkler@boundarydevices.com>
| | * | ARM: mxs: Add SanDisk Sansa Fuze+ boardMarek Vasut2013-09-10-0/+631
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add STMP3780-based Sansa Fuze+ board. This board is a small PMP device sporting a CPU which was later rebranded to i.MX233 . Currently supported is USB gadget mode and MMC . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
| | * | ARM: mxs: Add Creative ZEN XFi3 boardMarek Vasut2013-09-10-0/+460
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add STMP3780-based XFi3 board. This board is a small PMP device sporting a CPU which was later rebranded to i.MX233 . Currently supported is USB gadget mode and both external SD and internal Phison SD-NAND bridge . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
| | * | mx27: add missing constant for mx27trem2013-09-10-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add some missing constant (chip select, ...) Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr> Signed-off-by: Eric Jarrige <eric.jarrige@armadeus.org> Acked-by: Stefano Babic <sbabic@denx.de>
| | * | mx6sabresd: Add LVDS splash screen supportFabio Estevam2013-09-10-21/+145
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mx6sabresd boards can be connected to a Hannstar XGA LVDS panel. Add support for displaying U-boot splashscreen on it. By default, HDMI splash is selected. In order to use splash via LVDS, do the following in the U-boot prompt: setenv panel Hannstar-XGA save and reboot. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * | ARM: mxs: Receive r0 and r1 passed from BootROMMarek Vasut2013-09-10-36/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make sure value in register r0 and r1 is preserved and passed to the board_init_ll() and mxs_common_spl_init() where it can be processed further. The value in r0 can be configured during the BootStream generation to arbitary value, r1 contains pointer to return value from CALL'd function. This patch also clears the value in r0 before returning to BootROM to make sure the BootROM is not confused by this value. Finally, this patch cleans up some comments in the start.S file. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
| | * | ARM: mxs: Document the power block initializationMarek Vasut2013-09-10-0/+209
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds documentation for the functions used during the initialization of MXS power block. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
| | * | ARM: mxs: Sort the mx23evk and mx23_olinuxinoMarek Vasut2013-09-10-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These boards were not sortes in the boards.cfg, fix this. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br>
| | * | tools: mxsboot: Mark the FCB pages as validMarek Vasut2013-09-10-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Without this marker, Linux will complain that the NAND pages with FCB are invalid. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
| | * | mx6: Fix calculation of emi_slow clock rateAndrew Gabbasov2013-09-10-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is porting of Freescale's patch from version imx_v2009.08_3.0.35_4.0.0, that fixes the obvious mistype of bits offset macro name (ACLK_EMI_PODF_OFFSET was used instead of ACLK_EMI_SLOW_PODF_OFFSET). Using the occasion, change the variable name 'emi_slow_pof' to more consistent 'emi_slow_podf'. Signed-off-by: Jason Liu <r64343@freescale.com> Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
generated by cgit v1.1 at 2024-12-25 19:35:23 +0000