summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorAndre Przywara <andre.przywara@linaro.org>2013-09-19 18:06:44 +0200
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>2013-10-03 21:28:51 +0200
commitba6a1698116da272f14c53a3ae41467cb7fc4372 (patch)
tree135476d83f61ee09d473a66a2a341290cb050307
parentbb975455650b1f36681de31a93ffe54952ed3a6b (diff)
downloadu-boot-imx-ba6a1698116da272f14c53a3ae41467cb7fc4372.zip
u-boot-imx-ba6a1698116da272f14c53a3ae41467cb7fc4372.tar.gz
u-boot-imx-ba6a1698116da272f14c53a3ae41467cb7fc4372.tar.bz2
ARM: add SMP support for non-secure switch
Currently the non-secure switch is only done for the boot processor. To enable full SMP support, we have to switch all secondary cores into non-secure state also. So we add an entry point for secondary CPUs coming out of low-power state and make sure we put them into WFI again after having switched to non-secure state. For this we acknowledge and EOI the wake-up IPI, then go into WFI. Once being kicked out of it later, we sanity check that the start address has actually been changed (since another attempt to switch to non-secure would block the core) and jump to the new address. The actual CPU kick is done by sending an inter-processor interrupt via the GIC to all CPU interfaces except the requesting processor. The secondary cores will then setup their respective GIC CPU interface. While this approach is pretty universal across several ARMv7 boards, we make this function weak in case someone needs to tweak this for a specific board. The way of setting the secondary's start address is board specific, but mostly different only in the actual SMP pen address, so we also provide a weak default implementation and just depend on the proper address to be set in the config file. Signed-off-by: Andre Przywara <andre.przywara@linaro.org>
-rw-r--r--arch/arm/cpu/armv7/nonsec_virt.S35
-rw-r--r--arch/arm/cpu/armv7/virt-v7.c16
-rw-r--r--arch/arm/include/asm/armv7.h1
-rw-r--r--arch/arm/include/asm/gic.h2
-rw-r--r--include/common.h2
5 files changed, 55 insertions, 1 deletions
diff --git a/arch/arm/cpu/armv7/nonsec_virt.S b/arch/arm/cpu/armv7/nonsec_virt.S
index 3dd60b7..cbee8f7 100644
--- a/arch/arm/cpu/armv7/nonsec_virt.S
+++ b/arch/arm/cpu/armv7/nonsec_virt.S
@@ -58,6 +58,28 @@ _secure_monitor:
movs pc, lr @ return to non-secure SVC
/*
+ * Secondary CPUs start here and call the code for the core specific parts
+ * of the non-secure and HYP mode transition. The GIC distributor specific
+ * code has already been executed by a C function before.
+ * Then they go back to wfi and wait to be woken up by the kernel again.
+ */
+ENTRY(_smp_pen)
+ mrs r0, cpsr
+ orr r0, r0, #0xc0
+ msr cpsr, r0 @ disable interrupts
+ ldr r1, =_start
+ mcr p15, 0, r1, c12, c0, 0 @ set VBAR
+
+ bl _nonsec_init
+
+ ldr r1, [r0, #GICC_IAR] @ acknowledge IPI
+ str r1, [r0, #GICC_EOIR] @ signal end of interrupt
+
+ adr r0, _smp_pen @ do not use this address again
+ b smp_waitloop @ wait for IPIs, board specific
+ENDPROC(_smp_pen)
+
+/*
* Switch a core to non-secure state.
*
* 1. initialize the GIC per-core interface
@@ -138,3 +160,16 @@ ENTRY(_nonsec_init)
bx lr
ENDPROC(_nonsec_init)
+
+#ifdef CONFIG_SMP_PEN_ADDR
+/* void __weak smp_waitloop(unsigned previous_address); */
+ENTRY(smp_waitloop)
+ wfi
+ ldr r1, =CONFIG_SMP_PEN_ADDR @ load start address
+ ldr r1, [r1]
+ cmp r0, r1 @ make sure we dont execute this code
+ beq smp_waitloop @ again (due to a spurious wakeup)
+ mov pc, r1
+ENDPROC(smp_waitloop)
+.weak smp_waitloop
+#endif
diff --git a/arch/arm/cpu/armv7/virt-v7.c b/arch/arm/cpu/armv7/virt-v7.c
index 068ac85..a0b8742 100644
--- a/arch/arm/cpu/armv7/virt-v7.c
+++ b/arch/arm/cpu/armv7/virt-v7.c
@@ -79,6 +79,17 @@ static unsigned long get_gicd_base_address(void)
#endif
}
+static void kick_secondary_cpus_gic(unsigned long gicdaddr)
+{
+ /* kick all CPUs (except this one) by writing to GICD_SGIR */
+ writel(1U << 24, gicdaddr + GICD_SGIR);
+}
+
+void __weak smp_kick_all_cpus(void)
+{
+ kick_secondary_cpus_gic(gic_dist_addr);
+}
+
int armv7_switch_nonsec(void)
{
unsigned int reg;
@@ -115,7 +126,10 @@ int armv7_switch_nonsec(void)
for (i = 1; i <= itlinesnr; i++)
writel((unsigned)-1, gic_dist_addr + GICD_IGROUPRn + 4 * i);
- /* call the non-sec switching code on this CPU */
+ smp_set_core_boot_addr((unsigned long)_smp_pen, -1);
+ smp_kick_all_cpus();
+
+ /* call the non-sec switching code on this CPU also */
_nonsec_init();
return 0;
diff --git a/arch/arm/include/asm/armv7.h b/arch/arm/include/asm/armv7.h
index b352d43..2efd4bc 100644
--- a/arch/arm/include/asm/armv7.h
+++ b/arch/arm/include/asm/armv7.h
@@ -82,6 +82,7 @@ int armv7_switch_nonsec(void);
/* defined in assembly file */
unsigned int _nonsec_init(void);
+void _smp_pen(void);
#endif /* CONFIG_ARMV7_NONSEC */
#endif /* ! __ASSEMBLY__ */
diff --git a/arch/arm/include/asm/gic.h b/arch/arm/include/asm/gic.h
index c2b1e28..a0891cc 100644
--- a/arch/arm/include/asm/gic.h
+++ b/arch/arm/include/asm/gic.h
@@ -13,5 +13,7 @@
#define GIC_CPU_OFFSET_A15 0x2000
#define GICC_CTLR 0x0000
#define GICC_PMR 0x0004
+#define GICC_IAR 0x000C
+#define GICC_EOIR 0x0010
#endif
diff --git a/include/common.h b/include/common.h
index 8addf43..4d2a56d 100644
--- a/include/common.h
+++ b/include/common.h
@@ -627,6 +627,8 @@ void ft_pci_setup(void *blob, bd_t *bd);
#endif
#endif
+void smp_set_core_boot_addr(unsigned long addr, int corenr);
+void smp_kick_all_cpus(void);
/* $(CPU)/serial.c */
int serial_init (void);