summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
...
| * arm: at91/spl: matrix: move matrix init to separate fileWenyou Yang2015-11-30-43/+52
| | | | | | | | | | | | | | | | | | | | To make the matrix initialization code sharing with other SoCs, move it from SAMA5D4 particular file, mach-at91/armv7/sama5d4_devices.c to a separate file, mach-at91/matrix.c Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * arm: atmel: Add SAMA5D2 Xplained boardWenyou Yang2015-11-30-6/+731
| | | | | | | | | | | | | | | | | | | | | | | | The board supports following features: - Boot media support: SD card/e.MMC/SPI flash, - Support LCD display (optional, disabled by default), - Support ethernet, - Support USB mass storage. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> [fix checkpatch warnings] Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * gpio: atmel: Add the PIO4 driver supportWenyou Yang2015-11-30-0/+356
| | | | | | | | | | | | | | The PIO4 is introduced from SAMA5D2, as a new version for Atmel PIO controller. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2015-11-30-556/+5021
|\ \
| * | armv8: fsl-layerscape: Fix early MMU table for nand bootYork Sun2015-11-30-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The early MMU table doesn't enable all addresses. Unused addresses are marked as invalid, as introduced by commit 9979922. An entry was missing for NAND flash space, causing nand boot failure. Signed-off-by: York Sun <yorksun@freescale.com> CC: Alison Wang <alison.wang@freescale.com> CC: Prabhakar Kushwaha <prabhakar@freescale.com>
| * | armv8: ls2080a: Define CONFIG_ENV_OVERWRITE to overwrite serial and ethaddrAlison Wang2015-11-30-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | As the environment variables "serial#" and "ethaddr" need to be overwriten by the users, CONFIG_ENV_OVERWRITE is defined to disable the write protection. Anybody can change or delete these parameters. Signed-off-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | net: phy: added aquantia PHY AQR405 supportShaohui Xie2015-11-30-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | The phy can share driver with other aquantia PHYs, so we only add PHY ID. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | armv8: ls2085a: Add workaround of errata A009635Prabhakar Kushwaha2015-11-30-0/+81
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the core runs at higher than x3 speed of the platform, there is possiblity about sev instruction to getting missed by other cores. This is because of SoC Run Control block may not able to sample the EVENTI(Sev) signals. Configure Run Control and EPU to periodically send out EVENTI signals to wake up A57 cores. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | board/ls2080qds: Fix typo in README for QSGMII riser cardPrabhakar Kushwaha2015-11-30-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DPMACx to PHY mapping for SGMII is mentioned as QSGMII. So fix typo in README for QSGMII rise card. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> [York Sun: Change from ls2085aqds to ls2080aqds] Reviewed-by: York Sun <yorksun@freescale.com>
| * | arm: ls102xa: Update fdt_high and initrd_high for LS1021AQDS boardAlison Wang2015-11-30-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As 3G/1G user/kernel memory split is used on LS1021A, the Linux kernel fails to access the device tree blob on boot. The reason is that u-boot relocates the device tree blob into high memory when booting the kernel and the kernel is unable to access the blob. To avoid this issue, fdt_high is set to the value of 0xffffffff. The device tree blob will not get relocated and is still in low memory to make it accessible to the kernel. For the same reason, initrd_high is set to the value of 0xffffffff too. This patch is to update fdt_high and initrd_high for LS1021AQDS board. Signed-off-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | armv8: fsl-layerscape: Fix "cpu release" commandYork Sun2015-11-30-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | When one core is released, other cores may not have valid entry address. Those cores are trapped by "wfe" and wait for further instruction. When their address is set, they need to be kicked off by "sev". Signed-off-by: York Sun <yorksun@freescale.com>
| * | drivers/ddr/fsl: Fix typo in BIST test for DDR4York Sun2015-11-30-12/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | BIST test code has a typo, resulting the binding registers not maintained as expected. This typo results BIST runs twice on the covered memory. Signed-off-by: York Sun <yorksun@freescale.com> Reported-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
| * | armv8/layerscape: Update MMU table with execute-never bitsAlison Wang2015-11-30-31/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For most device addresses excution shouldn't be allowed. Revise the MMU table to enforce execute-never bits. OCRAM, DDR and IFC are allowed for excution. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Alison Wang <alison.wang@freescale.com> Reported-by: Zhichun Hua <zhichun.hua@freescale.com>
| * | drivers/ddr/fsl: Enable detection of one DDR controller operation for LSCH3York Sun2015-11-30-0/+49
| | | | | | | | | | | | | | | | | | | | | | | | Freescale LSCH3 platforms use two DDR controlers interleaving mode out of reset. It can be configured to disable one controller. To support this operation, the driver needs to detect and skip the disabled controller. Signed-off-by: York Sun <yorksun@freescale.com>
| * | armv8/ls1043ardb: add USB supportGong Qianyu2015-11-30-4/+40
| | | | | | | | | | | | | | | | | | | | | Add support for the third USB controller for LS1043A. Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | armv8/ls1043ardb: add DSPI supportGong Qianyu2015-11-30-0/+68
| | | | | | | | | | | | | | | | | | | | | | | | Use the U-Boot Driver Model. Just enable Freescale DSPI driver and set DSPI related parameters in dts file. Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | armv8/ls1043aqds: dts: add dtb supportGong Qianyu2015-11-30-1/+128
| | | | | | | | | | | | | | | | | | | | | Reuse the dts files from ls1043a linux kernel. Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | armv8/ls1043aqds: add LS1043AQDS board supportShaohui Xie2015-11-30-0/+1649
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LS1043AQDS Specification: ------------------------- Memory subsystem: * 2GByte DDR4 DIMM * 128 Mbyte NOR flash single-chip memory * 512 Mbyte NAND flash * 16 Mbyte high-speed SPI flash * SD connector to interface with the SD memory card Ethernet: * Two RGMII ports * XFI 10G port * SGMII * QSGMII with 4x 1G ports PCIe: supports Gen 1 and Gen 2 SATA 3.0: one SATA 3.0 port USB 3.0: two micro AB connector and one type A connector UART: supports two UARTs up to 115200 bps for console Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> [York Sun: Add CONFIG_SYS_NS16550=y in defconfig] Reviewed-by: York Sun <yorksun@freescale.com>
| * | armv8/ls1043ardb: dts: add dtb supportGong Qianyu2015-11-30-0/+247
| | | | | | | | | | | | | | | | | | | | | | | | Reuse dts files from ls1043a linux kernel. Some parts in dts files may not be needed by U-Boot. Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | armv8/fsl-layerscape: Remove reference to gdataGong Qianyu2015-11-30-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | The global_data pointer (gd) has been set earlier in crt0_64.S. So there's no need to assign it again. Remove gdata since it is going away in U-Boot. Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | pci/layerscape: add support for LS1043A PCIe LUT register accessMingkai Hu2015-11-30-7/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The endian and base address of PEX LUT register region is different between Chassis 2 and Chassis 3, so move the base address definition to chassis specific header file and add pex_lut_* functions to access LUT register. Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | armv8: ls2085a: Add support of LS2085A SoCPrabhakar Kushwaha2015-11-30-20/+140
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Freescale's LS2085A is a another personality of LS2080A SoC with support of AIOP and DP-DDR. This Patch adds support of LS2085A Personality. Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> [York Sun: Updated MAINTAINERS files Dropped #ifdef in cpu.h Add CONFIG_SYS_NS16550=y in defconfig] Reviewed-by: York Sun <yorksun@freescale.com>
| * | armv8: LS2080A: Rename LS2085A to reflect LS2080APrabhakar Kushwaha2015-11-30-190/+244
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LS2080A is a prime personality of Freescale’s LS2085A. It is a non-AIOP personality without support of DP-DDR, L2 switch, 1588, PCIe endpoint etc. So renaming existing LS2085A code base to reflect LS2080A (Prime personality) Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> [York Sun: Dropped #ifdef in cpu.c for cpu_type_list] Reviewed-by: York Sun <yorksun@freescale.com>
| * | driver: net: ldpaa: Fix Rx buffer alignmentPrabhakar Kushwaha2015-11-30-6/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MC 0.7.1.2 enforces limitation i.e.: "Packets may be corrupted in several combinations of buffer size and frame offsets. Workaround: Use buffers that are of size that is a multiple of 256, and frame offset that is a multiple of 256" Updating the DPNI Eth driver to comply with the restriction. Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | driver: net: ldpaa: Add debug informationPrabhakar Kushwaha2015-11-30-0/+123
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add following debug information in the driver - Get various DPNI counter values - Get link status of DPNI objects - Get information of both ends of connection (DPMAC - DPNI) Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | driver: net: ldpaa: Use DPMAC as net devicePrabhakar Kushwaha2015-11-30-45/+144
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As per current implementation of DPAA2 ethernet driver DPNI is used as net device. DPNI is tangible objects can be multiple connected to same physical lane. Use DPMAC as net device where it represents physical lane. Below modification done in driver - Use global DPNI object - Connect DPMAC to DPNI - Create and destroy DPMAC Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | driver: net: fsl-mc: Create DPAA2 object at run-timePrabhakar Kushwaha2015-11-30-41/+468
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Freescale's DPAA2 ethernet driver depends upon the static DPL for the DPRC, DPNI, DPBP, DPIO objects. Instead of static objects, Create DPNI, DPBP, DPIO objects at run-time. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | driver: net: fsl-mc: Add DPAA2 commands to manage MCPrabhakar Kushwaha2015-11-30-223/+251
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Management complex Firmware, DPL and DPC are depolyed during u-boot boot sequence. Add new DPAA2 commands to manage Management Complex (MC) i.e. start mc, aiop and apply DPL from u-boot command prompt. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | driver: net: fsl-mc: Increase MC command timeoutPrabhakar Kushwaha2015-11-30-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | dpni_create API take takes more time as comapred to existing supported APIs of MC Flib. So increase MC command timeout. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | driver: ldpaa: Add api to return linked PHY ID of DPMACPrabhakar Kushwaha2015-11-30-1/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DPMAC represents physical line on the board. This physical line eventually asscociate with on-board PHY. So Add an api to return linked PHY ID of DPMAC object. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | armv8: ls2085aqds: Print function name during SerDes errorPrabhakar Kushwaha2015-11-30-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | Print function name along with SerDes Protocol during SerDes Protocol not supported error. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | driver: net: fsl-mc: Add APIs for DPMAC objects in FLIBPrabhakar Kushwaha2015-11-30-1/+692
| | | | | | | | | | | | | | | | | | | | | | | | | | | DPMAC object of Management complex controls Physical MAC and MDIO controller. It provides APIs for MDIO and link state updates. It also provides APIs for PHY/link configuration. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | driver: net: fsl-mc: Add create, destroy APIs in flibsPrabhakar Kushwaha2015-11-30-0/+548
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current Management Complex Flibs does not support APIs for adding and destroying the objects. Add APIs to create and destroy objects for DPBP, DPIO, DPNI and DPRC. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | armv8: lsch3: Fix lane protocol parsing logicPrabhakar Kushwaha2015-11-30-10/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current implementation only consider SGMIIs for dpmac initialization. XFI serdes protocols also uses dpmac. Also, fix lane protocol parsing logic to consider both XFIs and SGMIIs. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | arm: ls1021a: Ensure Generic Timer disabled before jumping into the OSAlison Wang2015-11-30-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch addresses a problem mentioned recently on this mailing list: [1]. In that posting a LS1021 based system was locking up at about 5 minutes after boot,but the problem was mysteriously related to the toolchain used for building u-boot.Debugging the problem reveals a stuck interrupt 29 on the GIC. It appears Freescale's LS1021 support in u-boot erroneously sets the 64-bit ARM generic PL1 physical time CompareValue register to all-ones with a 32-bit value.This causes the timer compare to fire 344 seconds after u-boot configures it.Depending on how fast u-boot gets the kernel booted,this amounts to about 5-minutes of Linux uptime before locking up. Apparently the bug is masked by some toolchains. Perhaps this is explained by default compiler options, word sizes, or binutils versions. To fix the above issue, the generic physical timer is disabled before jumping to the OS. [1] https://lists.yoctoproject.org/pipermail/meta-freescale/2015-June/014400.html Signed-off-by: Chris Kilgour <techie@whiterocker.com> Signed-off-by: Alison Wang <alison.wang@freescale.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | arm: ls1021a: Ensure LS1021 ARM Generic Timer CompareValue Set 64-bitAlison Wang2015-11-30-2/+3
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch addresses a problem mentioned recently on this mailing list: [1]. In that posting a LS1021 based system was locking up at about 5 minutes after boot, but the problem was mysteriously related to the toolchain used for building u-boot. Debugging the problem reveals a stuck interrupt 29 on the GIC. It appears Freescale's LS1021 support in u-boot erroneously sets the 64-bit ARM generic PL1 physical time CompareValue register to all-ones with a 32-bit value. This causes the timer compare to fire 344 seconds after u-boot configures it. Depending on how fast u-boot gets the kernel booted, this amounts to about 5-minutes of Linux uptime before locking up. Apparently the bug is masked by some toolchains. Perhaps this is explained by default compiler options, word sizes, or binutils versions. At any rate this patch makes the manipulation explicitly 64-bit which alleviates the issue. [1] https://lists.yoctoproject.org/pipermail/meta-freescale/2015-June/014400.html Signed-off-by: Chris Kilgour <techie@whiterocker.com> Signed-off-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | Merge git://git.denx.de/u-boot-socfpgaTom Rini2015-11-30-20/+1590
|\ \
| * | arm: socfpga: Remove fsloadcmd from environmentChin Liang See2015-11-30-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove fsloadcmd / ext2load as we are using load command which use the corresponding latest file system command. Signed-off-by: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Dinh Nguyen <dinh.linux@gmail.com> Cc: Pavel Machek <pavel@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
| * | arm: socfpga: dts: Adding drvsel and smplsel to dtsChin Liang See2015-11-30-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adding new node drvsel and smplsel for SDMMC Signed-off-by: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Dinh Nguyen <dinh.linux@gmail.com> Cc: Pavel Machek <pavel@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Cc: Jaehoon Chung <jh80.chung@samsung.com>
| * | mmc: socfpga_dw_mmc: Move drvsel and smplsel to dtsChin Liang See2015-11-30-10/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | socfpga_dw_mmc driver will obtain the drvsel and smplsel value from device tree instead of definition in config header file. Signed-off-by: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Dinh Nguyen <dinh.linux@gmail.com> Cc: Pavel Machek <pavel@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Cc: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Marek Vasut <marex@denx.de>
| * | arm: socfpga: Repair SoCrates boardMarek Vasut2015-11-30-1/+1515
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This board was constantly parasiting on the CV SoCDK, so split it into it's own separate directory. Moreover, the board config was missing important bits, like simple-bus support in SPL, the DRAM configuration was incorrect and the DTS was also missing the pre reloc bits. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Dinh Nguyen <dinh.linux@gmail.com> Cc: Jan Viktorin <viktorin@rehivetech.com>
| * | ARM: socfpga: rename the cyclone5 and arria5 base address fileDinh Nguyen2015-11-30-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | When adding support for the Arria10 platform, we're going to name the file base_addr_a10.h, so to be systematic about it, rename the socfpga_base_addr.h to be base_addr_ac5.h for the Arria5 and Cyclone5 platform. Suggested-by: Marek Vasut <marex@denx.de> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
| * | ARM: socfpga: arria10: add base address map for Arria10Dinh Nguyen2015-11-30-0/+45
| | | | | | | | | | | | | | | | | | | | | Add the base address map for Arria10. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Reviewed-by: Marek Vasut <marex@denx.de>
| * | arm: socfpga: reset: FIX address of tstscratch registerPhilipp Rosenberger2015-11-30-0/+1
| |/ | | | | | | | | | | | | | | | | | | | | The Cyclone V Hard Processor System Technical Reference Manual in the chapter about the Reset Manager Module Address Map stats that the offset of the tstscratch register ist 0x54 not 0x24. Cyclone V Hard Processor System Technical Reference Manual cv_5v4 2015.11.02 page 3-17 Reset Manager Module Address Map Signed-off-by: Philipp Rosenberger <ilu@linutronix.de>
* | Merge git://www.denx.de/git/u-boot-cfi-flashTom Rini2015-11-30-3/+4
|\ \
| * | cfi_flash: give default CONFIG_SYS_MAX_FLASH_SECT in flash.hThomas Chou2015-11-30-3/+4
| |/ | | | | | | | | | | | | | | | | Give default CONFIG_SYS_MAX_FLASH_SECT in flash.h, so that the header can be included regardless of the present of flash. The value 512 is the most used. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Stefan Roese <sr@denx.de>
* | Merge git://www.denx.de/git/u-boot-ppc4xxTom Rini2015-11-30-25/+5
|\ \
| * | PPC4xx: Create "liebherr" vendor directoryWolfgang Denk2015-11-30-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In preparation of some new Liebherr boards to be added soon, a new "liebherr" vendor directory gets created, and the "lwmon5" board directory is moved into this new vendor directory. cc: Stefan Roese <sr@denx.de> Signed-off-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
| * | ppc4xx: Remove remnants from ocotea, taishan, ebony and taihuStefan Roese2015-11-30-23/+0
| |/ | | | | | | | | | | | | | | The removal of some PPC4xx boards did not catch all references to these boards. This patch now removes all remnants still left. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Stefan Roese <sr@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-samsungTom Rini2015-11-30-6/+4
|\ \
generated by cgit v1.1 at 2024-10-18 17:27:05 +0000