Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq

132 files changed, 5021 insertions, 556 deletions

diff --git a/README b/README
index b5f6471..4fee706 100644
--- a/README
+++ b/README
@@ -611,6 +611,9 @@ The following options need to be configured:
 		CONFIG_SYS_FSL_OTHER_DDR_NUM_CTRLS
 		Number of controllers used for other than main memory.
 
+		CONFIG_SYS_FSL_HAS_DP_DDR
+		Defines the SoC has DP-DDR used for DPAA.
+
 		CONFIG_SYS_FSL_SEC_BE
 		Defines the SEC controller register space as Big Endian
 
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9705685..408e4ff 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -589,36 +589,46 @@ config TARGET_VEXPRESS64_JUNO
 	bool "Support Versatile Express Juno Development Platform"
 	select ARM64
 
-config TARGET_LS2085A_EMU
-	bool "Support ls2085a_emu"
+config TARGET_LS2080A_EMU
+	bool "Support ls2080a_emu"
 	select ARM64
 	select ARMV8_MULTIENTRY
+	help
+	  Support for Freescale LS2080A_EMU platform
+	  The LS2080A Development System (EMULATOR) is a pre silicon
+	  development platform that supports the QorIQ LS2080A
+	  Layerscape Architecture processor.
 
-config TARGET_LS2085A_SIMU
-	bool "Support ls2085a_simu"
+config TARGET_LS2080A_SIMU
+	bool "Support ls2080a_simu"
 	select ARM64
 	select ARMV8_MULTIENTRY
+	help
+	  Support for Freescale LS2080A_SIMU platform
+	  The LS2080A Development System (QDS) is a pre silicon
+	  development platform that supports the QorIQ LS2080A
+	  Layerscape Architecture processor.
 
-config TARGET_LS2085AQDS
-	bool "Support ls2085aqds"
+config TARGET_LS2080AQDS
+	bool "Support ls2080aqds"
 	select ARM64
 	select ARMV8_MULTIENTRY
 	select SUPPORT_SPL
 	help
-	  Support for Freescale LS2085AQDS platform
-	  The LS2085A Development System (QDS) is a high-performance
-	  development platform that supports the QorIQ LS2085A
+	  Support for Freescale LS2080AQDS platform
+	  The LS2080A Development System (QDS) is a high-performance
+	  development platform that supports the QorIQ LS2080A
 	  Layerscape Architecture processor.
 
-config TARGET_LS2085ARDB
-	bool "Support ls2085ardb"
+config TARGET_LS2080ARDB
+	bool "Support ls2080ardb"
 	select ARM64
 	select ARMV8_MULTIENTRY
 	select SUPPORT_SPL
 	help
-	  Support for Freescale LS2085ARDB platform.
-	  The LS2085A Reference design board (RDB) is a high-performance
-	  development platform that supports the QorIQ LS2085A
+	  Support for Freescale LS2080ARDB platform.
+	  The LS2080A Reference design board (RDB) is a high-performance
+	  development platform that supports the QorIQ LS2080A
 	  Layerscape Architecture processor.
 
 config TARGET_HIKEY
@@ -640,6 +650,14 @@ config TARGET_LS1021ATWR
 	select CPU_V7
 	select SUPPORT_SPL
 
+config TARGET_LS1043AQDS
+	bool "Support ls1043aqds"
+	select ARM64
+	select ARMV8_MULTIENTRY
+	select SUPPORT_SPL
+	help
+	  Support for Freescale LS1043AQDS platform.
+
 config TARGET_LS1043ARDB
 	bool "Support ls1043ardb"
 	select ARM64
@@ -759,10 +777,11 @@ source "board/compulab/cm_t43/Kconfig"
 source "board/creative/xfi3/Kconfig"
 source "board/denx/m28evk/Kconfig"
 source "board/denx/m53evk/Kconfig"
-source "board/freescale/ls2085a/Kconfig"
-source "board/freescale/ls2085aqds/Kconfig"
-source "board/freescale/ls2085ardb/Kconfig"
+source "board/freescale/ls2080a/Kconfig"
+source "board/freescale/ls2080aqds/Kconfig"
+source "board/freescale/ls2080ardb/Kconfig"
 source "board/freescale/ls1021aqds/Kconfig"
+source "board/freescale/ls1043aqds/Kconfig"
 source "board/freescale/ls1021atwr/Kconfig"
 source "board/freescale/ls1043ardb/Kconfig"
 source "board/freescale/mx23evk/Kconfig"
diff --git a/arch/arm/cpu/armv7/ls102xa/cpu.c b/arch/arm/cpu/armv7/ls102xa/cpu.c
index df2e1b7..2215fe9 100644
--- a/arch/arm/cpu/armv7/ls102xa/cpu.c
+++ b/arch/arm/cpu/armv7/ls102xa/cpu.c
@@ -372,3 +372,13 @@ void reset_cpu(ulong addr)
 		 */
 	}
 }
+
+void arch_preboot_os(void)
+{
+	unsigned long ctrl;
+
+	/* Disable PL1 Physical Timer */
+	asm("mrc p15, 0, %0, c14, c2, 1" : "=r" (ctrl));
+	ctrl &= ~ARCH_TIMER_CTRL_ENABLE;
+	asm("mcr p15, 0, %0, c14, c2, 1" : : "r" (ctrl));
+}
diff --git a/arch/arm/cpu/armv7/ls102xa/timer.c b/arch/arm/cpu/armv7/ls102xa/timer.c
index 11b17b2..e6a32ca 100644
--- a/arch/arm/cpu/armv7/ls102xa/timer.c
+++ b/arch/arm/cpu/armv7/ls102xa/timer.c
@@ -56,7 +56,8 @@ static inline unsigned long long us_to_tick(unsigned long long usec)
 int timer_init(void)
 {
 	struct sctr_regs *sctr = (struct sctr_regs *)SCTR_BASE_ADDR;
-	unsigned long ctrl, val, freq;
+	unsigned long ctrl, freq;
+	unsigned long long val;
 
 	/* Enable System Counter */
 	writel(SYS_COUNTER_CTRL_ENABLE, &sctr->cntcr);
diff --git a/arch/arm/cpu/armv8/cache_v8.c b/arch/arm/cpu/armv8/cache_v8.c
index 1ece6a2..53bac3b 100644
--- a/arch/arm/cpu/armv8/cache_v8.c
+++ b/arch/arm/cpu/armv8/cache_v8.c
@@ -13,13 +13,13 @@ DECLARE_GLOBAL_DATA_PTR;
 
 #ifndef CONFIG_SYS_DCACHE_OFF
 inline void set_pgtable_section(u64 *page_table, u64 index, u64 section,
-			 u64 memory_type, u64 share)
+			 u64 memory_type, u64 attribute)
 {
 	u64 value;
 
 	value = section | PMD_TYPE_SECT | PMD_SECT_AF;
 	value |= PMD_ATTRINDX(memory_type);
-	value |= share;
+	value |= attribute;
 	page_table[index] = value;
 }
 
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Makefile b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
index 6fa08c8..cce7405 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Makefile
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
@@ -21,10 +21,14 @@ obj-$(CONFIG_SYS_HAS_SERDES) += fsl_lsch2_serdes.o
 endif
 endif
 
+ifneq ($(CONFIG_LS2080A),)
+obj-$(CONFIG_SYS_HAS_SERDES) += ls2080a_serdes.o
+endif
+
 ifneq ($(CONFIG_LS2085A),)
-obj-$(CONFIG_SYS_HAS_SERDES) += ls2085a_serdes.o
-else
+obj-$(CONFIG_SYS_HAS_SERDES) += ls2080a_serdes.o
+endif
+
 ifneq ($(CONFIG_LS1043A),)
 obj-$(CONFIG_SYS_HAS_SERDES) += ls1043a_serdes.o
 endif
-endif
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/README.lsch3 b/arch/arm/cpu/armv8/fsl-layerscape/README.lsch3
index 03e18f6..f9323c1 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/README.lsch3
+++ b/arch/arm/cpu/armv8/fsl-layerscape/README.lsch3
@@ -7,7 +7,7 @@
 Freescale LayerScape with Chassis Generation 3
 
 This architecture supports Freescale ARMv8 SoCs with Chassis generation 3,
-for example LS2085A.
+for example LS2080A.
 
 DDR Layout
 ============
@@ -152,7 +152,7 @@ u-boot command
 nand write <rcw image in memory> 0 <size of rcw image>
 
 To form the NAND image, build u-boot with NAND config, for example,
-ls2085aqds_nand_defconfig. The image needed is u-boot-with-spl.bin.
+ls2080aqds_nand_defconfig. The image needed is u-boot-with-spl.bin.
 The u-boot image should be written to match SRC_ADDR, in above example 0x20000.
 
 nand write <u-boot image in memory> 200000 <size of u-boot image>
@@ -242,3 +242,84 @@ MMU Translation Tables
                           | 0x81_0000_0000 |        | 0x08_0080_0000 |
                           ------------------        ------------------
 			         ...	                   ...
+
+
+DPAA2 commands to manage Management Complex (MC)
+------------------------------------------------
+DPAA2 commands has been introduced to manage Management Complex
+(MC). These commands are used to start mc, aiop and apply DPL
+from u-boot command prompt.
+
+Please note Management complex Firmware(MC), DPL and DPC are no
+more deployed during u-boot boot-sequence.
+
+Commands:
+a) fsl_mc start mc <FW_addr> <DPC_addr> - Start Management Complex
+b) fsl_mc apply DPL <DPL_addr> - Apply DPL file
+c) fsl_mc start aiop <FW_addr> - Start AIOP
+
+How to use commands :-
+1. Command sequence for u-boot ethernet:
+   a) fsl_mc start mc <FW_addr> <DPC_addr> - Start Management Complex
+   b) DPMAC net-devices are now available for use
+
+   Example-
+	Assumption: MC firmware, DPL and DPC dtb is already programmed
+	on NOR flash.
+
+	=> fsl_mc start mc 580300000 580800000
+	=> setenv ethact DPMAC1@xgmii
+	=> ping $serverip
+
+2. Command sequence for Linux boot:
+   a) fsl_mc start mc <FW_addr> <DPC_addr> - Start Management Complex
+   b) fsl_mc apply DPL <DPL_addr> - Apply DPL file
+   c) No DPMAC net-devices are available for use in u-boot
+   d) boot Linux
+
+   Example-
+	Assumption: MC firmware, DPL and DPC dtb is already programmed
+	on NOR flash.
+
+	=> fsl_mc start mc 580300000 580800000
+	=> setenv ethact DPMAC1@xgmii
+	=> tftp a0000000 kernel.itb
+	=> fsl_mc apply dpl 580700000
+	=> bootm a0000000
+
+3. Command sequence for AIOP boot:
+   a) fsl_mc start mc <FW_addr> <DPC_addr> - Start Management Complex
+   b) fsl_mc start aiop <FW_addr> - Start AIOP
+   c) fsl_mc apply DPL <DPL_addr> - Apply DPL file
+   d) No DPMAC net-devices are availabe for use in u-boot
+  Please note actual AIOP start will happen during DPL parsing of
+  Management complex
+
+  Example-
+	Assumption: MC firmware, DPL, DPC dtb and AIOP firmware is already
+	programmed on NOR flash.
+
+	=> fsl_mc start mc 580300000 580800000
+	=> fsl_mc start aiop 0x580900000
+	=> setenv ethact DPMAC1@xgmii
+	=> fsl_mc apply dpl 580700000
+
+Errata A009635
+---------------
+If the core runs at higher than x3 speed of the platform, there is
+possiblity about sev instruction to getting missed by other cores.
+This is because of SoC Run Control block may not able to sample
+the EVENTI(Sev) signals.
+
+Workaround: Configure Run Control and EPU to periodically send out EVENTI signals to
+wake up A57 cores
+
+Errata workaround uses Env variable "a009635_interval_val". It uses decimal
+value.
+- Default value of env variable is platform clock (MHz)
+
+- User can modify default value by updating the env variable
+  setenv a009635_interval_val 600; saveenv;
+  It configure platform clock as 600 MHz
+
+- Env variable as 0 signifies no workaround
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
index 0cb0afa..8847fc0 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
@@ -76,7 +76,7 @@ static int set_block_entry(const struct sys_mmu_table *list,
 				    index,
 				    block_addr,
 				    list->memory_type,
-				    list->share);
+				    list->attribute);
 		block_addr += block_size;
 		index++;
 	}
@@ -438,7 +438,7 @@ int print_cpuinfo(void)
 #ifdef CONFIG_SYS_DPAA_FMAN
 	printf("  FMAN:     %-4s MHz", strmhz(buf, sysinfo.freq_fman[0]));
 #endif
-#ifdef CONFIG_FSL_LSCH3
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
 	printf("     DP-DDR:   %-4s MT/s", strmhz(buf, sysinfo.freq_ddrbus2));
 #endif
 	puts("\n");
@@ -484,7 +484,13 @@ int arch_early_init_r(void)
 {
 #ifdef CONFIG_MP
 	int rv = 1;
+#endif
 
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009635
+	erratum_a009635();
+#endif
+
+#ifdef CONFIG_MP
 	rv = fsl_layerscape_wake_seconday_cores();
 	if (rv)
 		printf("Did not wake secondary cores\n");
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
index 47599c1..eafdd71 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
@@ -141,7 +141,7 @@ void append_mmu_masters(void *blob, const char *smmu_path,
 
 /*
  * The info below summarizes how streamID partitioning works
- * for ls2085a and how it is conveyed to the OS via the device tree.
+ * for ls2080a and how it is conveyed to the OS via the device tree.
  *
  *  -non-PCI legacy, platform devices (USB, SD/MMC, SATA, DMA)
  *     -all legacy devices get a unique ICID assigned and programmed in
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c
index 2ab8da6..918e889 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c
@@ -18,6 +18,11 @@ static u8 serdes1_prtcl_map[SERDES_PRCTL_COUNT];
 static u8 serdes2_prtcl_map[SERDES_PRCTL_COUNT];
 #endif
 
+#ifdef CONFIG_FSL_MC_ENET
+int xfi_dpmac[XFI8 + 1];
+int sgmii_dpmac[SGMII16 + 1];
+#endif
+
 int is_serdes_configured(enum srds_prtcl device)
 {
 	int ret = 0;
@@ -116,9 +121,15 @@ void serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift,
 				wriop_init_dpmac(sd, 12, (int)lane_prtcl);
 				break;
 			default:
+				if (lane_prtcl >= XFI1 && lane_prtcl <= XFI8)
+					wriop_init_dpmac(sd,
+							 xfi_dpmac[lane_prtcl],
+							 (int)lane_prtcl);
+
 				 if (lane_prtcl >= SGMII1 &&
-					   lane_prtcl <= SGMII16)
-					wriop_init_dpmac(sd, lane + 1,
+				     lane_prtcl <= SGMII16)
+					wriop_init_dpmac(sd, sgmii_dpmac[
+							 lane_prtcl],
 							 (int)lane_prtcl);
 				break;
 			}
@@ -129,6 +140,16 @@ void serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift,
 
 void fsl_serdes_init(void)
 {
+#ifdef CONFIG_FSL_MC_ENET
+	int i , j;
+
+	for (i = XFI1, j = 1; i <= XFI8; i++, j++)
+		xfi_dpmac[i] = j;
+
+	for (i = SGMII1, j = 1; i <= SGMII16; i++, j++)
+		sgmii_dpmac[i] = j;
+#endif
+
 #ifdef CONFIG_SYS_FSL_SRDS_1
 	serdes_init(FSL_SRDS_1,
 		    CONFIG_SYS_FSL_LSCH3_SERDES_ADDR,
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c
index 4054c3c..81cf470 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c
@@ -11,6 +11,7 @@
 #include <fsl_ifc.h>
 #include <asm/processor.h>
 #include <asm/io.h>
+#include <asm/arch-fsl-layerscape/immap_lsch3.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/soc.h>
 #include "cpu.h"
@@ -77,11 +78,15 @@ void get_sys_info(struct sys_info *sys_info)
 	sys_info->freq_systembus = sysclk;
 #ifdef CONFIG_DDR_CLK_FREQ
 	sys_info->freq_ddrbus = CONFIG_DDR_CLK_FREQ;
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
 	sys_info->freq_ddrbus2 = CONFIG_DDR_CLK_FREQ;
+#endif
 #else
 	sys_info->freq_ddrbus = sysclk;
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
 	sys_info->freq_ddrbus2 = sysclk;
 #endif
+#endif
 
 	sys_info->freq_systembus *= (gur_in32(&gur->rcwsr[0]) >>
 			FSL_CHASSIS3_RCWSR0_SYS_PLL_RAT_SHIFT) &
@@ -91,9 +96,11 @@ void get_sys_info(struct sys_info *sys_info)
 	sys_info->freq_ddrbus *= (gur_in32(&gur->rcwsr[0]) >>
 			FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_SHIFT) &
 			FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_MASK;
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
 	sys_info->freq_ddrbus2 *= (gur_in32(&gur->rcwsr[0]) >>
 			FSL_CHASSIS3_RCWSR0_MEM2_PLL_RAT_SHIFT) &
 			FSL_CHASSIS3_RCWSR0_MEM2_PLL_RAT_MASK;
+#endif
 
 	for (i = 0; i < CONFIG_SYS_FSL_NUM_CC_PLLS; i++) {
 		/*
@@ -133,7 +140,9 @@ int get_clocks(void)
 	gd->cpu_clk = sys_info.freq_processor[0];
 	gd->bus_clk = sys_info.freq_systembus;
 	gd->mem_clk = sys_info.freq_ddrbus;
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
 	gd->arch.mem2_clk = sys_info.freq_ddrbus2;
+#endif
 #if defined(CONFIG_FSL_ESDHC)
 	gd->arch.sdhc_clk = gd->bus_clk / 2;
 #endif /* defined(CONFIG_FSL_ESDHC) */
@@ -169,8 +178,10 @@ ulong get_ddr_freq(ulong ctrl_num)
 	 * DDR controller 0 & 1 are on memory complex 0
 	 * DDR controler 2 is on memory complext 1
 	 */
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
 	if (ctrl_num >= 2)
 		return gd->arch.mem2_clk;
+#endif
 
 	return gd->mem_clk;
 }
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls2085a_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/ls2080a_serdes.c
index ea3114c..8ef4f1c 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/ls2085a_serdes.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/ls2080a_serdes.c
@@ -28,7 +28,12 @@ static struct serdes_config serdes1_cfg_tbl[] = {
 		SGMII1 } },
 	{0x26, {SGMII8, SGMII7, SGMII6, SGMII5, SGMII4, SGMII3, XFI2, XFI1 } },
 	{0x28, {SGMII8, SGMII7, SGMII6, SGMII5, XFI4, XFI3, XFI2, XFI1 } },
+#ifdef CONFIG_LS2080A
+	{0x2A, {NONE, NONE, NONE, XFI5, XFI4, XFI3, XFI2, XFI1 } },
+#endif
+#ifdef CONFIG_LS2085A
 	{0x2A, {XFI8, XFI7, XFI6, XFI5, XFI4, XFI3, XFI2, XFI1 } },
+#endif
 	{0x2B, {SGMII8, SGMII7, SGMII6, SGMII5, XAUI1, XAUI1, XAUI1, XAUI1  } },
 	{0x32, {XAUI2, XAUI2, XAUI2, XAUI2, XAUI1, XAUI1, XAUI1, XAUI1  } },
 	{0x33, {PCIE2, PCIE2, PCIE2, PCIE2, QSGMII_C, QSGMII_D, QSGMII_A,
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/mp.c b/arch/arm/cpu/armv8/fsl-layerscape/mp.c
index 0d600db..df7ffb8 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/mp.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/mp.c
@@ -192,6 +192,12 @@ int cpu_release(int nr, int argc, char * const argv[])
 			   (unsigned long)table + SPIN_TABLE_ELEM_SIZE);
 	asm volatile("dsb st");
 	smp_kick_all_cpus();	/* only those with entry addr set will run */
+	/*
+	 * When the first release command runs, all cores are set to go. Those
+	 * without a valid entry address will be trapped by "wfe". "sev" kicks
+	 * them off to check the address again. When set, they continue to run.
+	 */
+	asm volatile("sev");
 
 	return 0;
 }
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index 637853d..8896b70 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -9,10 +9,53 @@
 #include <asm/arch/soc.h>
 #include <asm/io.h>
 #include <asm/global_data.h>
+#include <asm/arch-fsl-layerscape/config.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#ifdef CONFIG_LS2085A
+#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009635
+#define PLATFORM_CYCLE_ENV_VAR	"a009635_interval_val"
+
+static unsigned long get_internval_val_mhz(void)
+{
+	char *interval = getenv(PLATFORM_CYCLE_ENV_VAR);
+	/*
+	 *  interval is the number of platform cycles(MHz) between
+	 *  wake up events generated by EPU.
+	 */
+	ulong interval_mhz = get_bus_freq(0) / (1000 * 1000);
+
+	if (interval)
+		interval_mhz = simple_strtoul(interval, NULL, 10);
+
+	return interval_mhz;
+}
+
+void erratum_a009635(void)
+{
+	u32 val;
+	unsigned long interval_mhz = get_internval_val_mhz();
+
+	if (!interval_mhz)
+		return;
+
+	val = in_le32(DCSR_CGACRE5);
+	writel(val | 0x00000200, DCSR_CGACRE5);
+
+	val = in_le32(EPU_EPCMPR5);
+	writel(interval_mhz, EPU_EPCMPR5);
+	val = in_le32(EPU_EPCCR5);
+	writel(val | 0x82820000, EPU_EPCCR5);
+	val = in_le32(EPU_EPSMCR5);
+	writel(val | 0x002f0000, EPU_EPSMCR5);
+	val = in_le32(EPU_EPECR5);
+	writel(val | 0x20000000, EPU_EPECR5);
+	val = in_le32(EPU_EPGCR);
+	writel(val | 0x80000000, EPU_EPGCR);
+}
+#endif	/* CONFIG_SYS_FSL_ERRATUM_A009635 */
+
 static void erratum_a008751(void)
 {
 #ifdef CONFIG_SYS_FSL_ERRATUM_A008751
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/spl.c b/arch/arm/cpu/armv8/fsl-layerscape/spl.c
index ba551aa..f434c44 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/spl.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/spl.c
@@ -44,11 +44,9 @@ u32 spl_boot_mode(void)
 #ifdef CONFIG_SPL_BUILD
 void board_init_f(ulong dummy)
 {
-	/* Set global data pointer */
-	gd = &gdata;
 	/* Clear global data */
 	memset((void *)gd, 0, sizeof(gd_t));
-#ifdef CONFIG_LS2085A
+#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
 	arch_cpu_init();
 #endif
 #ifdef CONFIG_FSL_IFC
@@ -56,7 +54,7 @@ void board_init_f(ulong dummy)
 #endif
 	board_early_init_f();
 	timer_init();
-#ifdef CONFIG_LS2085A
+#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
 	env_init();
 #endif
 	get_clocks();
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 65e76ac..76d1faf 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -87,8 +87,10 @@ dtb-$(CONFIG_TARGET_STV0991) += stv0991.dtb
 
 dtb-$(CONFIG_LS102XA) += ls1021a-qds.dtb \
 	ls1021a-twr.dtb
-dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2085a-qds.dtb \
-	fsl-ls2085a-rdb.dtb
+dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \
+	fsl-ls2080a-rdb.dtb
+dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds.dtb \
+	fsl-ls1043a-rdb.dtb
 
 dtb-$(CONFIG_MACH_SUN4I) += \
 	sun4i-a10-a1000.dtb \
diff --git a/arch/arm/dts/fsl-ls1043a-qds.dts b/arch/arm/dts/fsl-ls1043a-qds.dts
new file mode 100644
index 0000000..7435222
--- /dev/null
+++ b/arch/arm/dts/fsl-ls1043a-qds.dts
@@ -0,0 +1,124 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-1043A family SoC.
+ *
+ * Copyright (C) 2015, Freescale Semiconductor
+ *
+ * Mingkai Hu <Mingkai.hu@freescale.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "fsl-ls1043a.dtsi"
+
+/ {
+	model = "LS1043A QDS Board";
+};
+
+&i2c0 {
+	status = "okay";
+	pca9547@77 {
+		compatible = "philips,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				/* IRQ10_B */
+				interrupts = <0 150 0x4>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			ina220@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			eeprom@56 {
+				compatible = "at24,24c512";
+				reg = <0x56>;
+			};
+
+			eeprom@57 {
+				compatible = "at24,24c512";
+				reg = <0x57>;
+			};
+
+			adt7461a@4c {
+				compatible = "adt7461a";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NOR, NAND Flashes and FPGA on board */
+	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
+		  0x2 0x0 0x0 0x7e800000 0x00010000
+		  0x3 0x0 0x0 0x7fb00000 0x00000100>;
+	status = "okay";
+
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+
+	nand@2,0 {
+		compatible = "fsl,ifc-nand";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x1 0x0 0x10000>;
+	};
+
+	fpga: board-control@3,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		reg = <0x3 0x0 0x0000100>;
+		bank-width = <1>;
+		device-width = <1>;
+		ranges = <0 3 0 0x100>;
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
diff --git a/arch/arm/dts/fsl-ls1043a-rdb.dts b/arch/arm/dts/fsl-ls1043a-rdb.dts
new file mode 100644
index 0000000..16c5c89
--- /dev/null
+++ b/arch/arm/dts/fsl-ls1043a-rdb.dts
@@ -0,0 +1,103 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-1043A family SoC.
+ *
+ * Copyright (C) 2015, Freescale Semiconductor
+ *
+ * Mingkai Hu <Mingkai.hu@freescale.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "fsl-ls1043a.dtsi"
+
+/ {
+	model = "LS1043A RDB Board";
+
+        aliases {
+		spi1 = &dspi0;
+        };
+
+};
+
+&dspi0 {
+	bus-num = <0>;
+	status = "okay";
+
+	dspiflash: n25q12a {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		reg = <0>;
+		spi-max-frequency = <1000000>; /* input clock */
+	};
+
+};
+
+&i2c0 {
+	status = "okay";
+	ina220@40 {
+		compatible = "ti,ina220";
+		reg = <0x40>;
+		shunt-resistor = <1000>;
+	};
+	adt7461a@4c {
+		compatible = "adi,adt7461a";
+		reg = <0x4c>;
+	};
+	eeprom@56 {
+		compatible = "at24,24c512";
+		reg = <0x52>;
+	};
+
+	eeprom@57 {
+		compatible = "at24,24c512";
+		reg = <0x53>;
+	};
+
+	rtc@68 {
+		compatible = "pericom,pt7c4338";
+		reg = <0x68>;
+	};
+};
+
+&ifc {
+	status = "okay";
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NOR, NAND Flashes and FPGA on board */
+	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
+		  0x2 0x0 0x0 0x7e800000 0x00010000
+		  0x3 0x0 0x0 0x7fb00000 0x00000100>;
+
+		nor@0,0 {
+			compatible = "cfi-flash";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x0 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@1,0 {
+			compatible = "fsl,ifc-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x1 0x0 0x10000>;
+		};
+
+		cpld: board-control@2,0 {
+			compatible = "fsl,ls1043ardb-cpld";
+			reg = <0x2 0x0 0x0000100>;
+		};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
diff --git a/arch/arm/dts/fsl-ls1043a.dtsi b/arch/arm/dts/fsl-ls1043a.dtsi
new file mode 100644
index 0000000..85ea81e
--- /dev/null
+++ b/arch/arm/dts/fsl-ls1043a.dtsi
@@ -0,0 +1,186 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-1043A family SoC.
+ *
+ * Copyright (C) 2014-2015, Freescale Semiconductor
+ *
+ * Mingkai Hu <Mingkai.hu@freescale.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/include/ "skeleton64.dtsi"
+
+/ {
+	compatible = "fsl,ls1043a";
+	interrupt-parent = <&gic>;
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			clocks = <&clockgen 1 0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			clocks = <&clockgen 1 0>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			clocks = <&clockgen 1 0>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			clocks = <&clockgen 1 0>;
+		};
+	};
+
+	sysclk: sysclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "sysclk";
+	};
+
+	gic: interrupt-controller@1400000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x1401000 0 0x1000>, /* GICD */
+		      <0x0 0x1402000 0 0x2000>, /* GICC */
+		      <0x0 0x1404000 0 0x2000>, /* GICH */
+		      <0x0 0x1406000 0 0x2000>; /* GICV */
+		interrupts = <1 9 0xf08>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		clockgen: clocking@1ee1000 {
+			compatible = "fsl,ls1043a-clockgen";
+			reg = <0x0 0x1ee1000 0x0 0x1000>;
+			#clock-cells = <2>;
+			clocks = <&sysclk>;
+		};
+
+		dspi0: dspi@2100000 {
+			compatible = "fsl,vf610-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2100000 0x0 0x10000>;
+			interrupts = <0 64 0x4>;
+			clock-names = "dspi";
+			clocks = <&clockgen 4 0>;
+			num-cs = <6>;
+			big-endian;
+			status = "disabled";
+		};
+
+		dspi1: dspi@2110000 {
+			compatible = "fsl,vf610-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2110000 0x0 0x10000>;
+			interrupts = <0 65 0x4>;
+			clock-names = "dspi";
+			clocks = <&clockgen 4 0>;
+			num-cs = <6>;
+			big-endian;
+			status = "disabled";
+		};
+
+		ifc: ifc@1530000 {
+			compatible = "fsl,ifc", "simple-bus";
+			reg = <0x0 0x1530000 0x0 0x10000>;
+			interrupts = <0 43 0x4>;
+		};
+
+		i2c0: i2c@2180000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2180000 0x0 0x10000>;
+			interrupts = <0 56 0x4>;
+			clock-names = "i2c";
+			clocks = <&clockgen 4 0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@2190000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2190000 0x0 0x10000>;
+			interrupts = <0 57 0x4>;
+			clock-names = "i2c";
+			clocks = <&clockgen 4 0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@21a0000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x21a0000 0x0 0x10000>;
+			interrupts = <0 58 0x4>;
+			clock-names = "i2c";
+			clocks = <&clockgen 4 0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@21b0000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x21b0000 0x0 0x10000>;
+			interrupts = <0 59 0x4>;
+			clock-names = "i2c";
+			clocks = <&clockgen 4 0>;
+			status = "disabled";
+		};
+
+		duart0: serial@21c0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x00 0x21c0500 0x0 0x100>;
+			interrupts = <0 54 0x4>;
+			clocks = <&clockgen 4 0>;
+		};
+
+		duart1: serial@21c0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x00 0x21c0600 0x0 0x100>;
+			interrupts = <0 54 0x4>;
+			clocks = <&clockgen 4 0>;
+		};
+
+		duart2: serial@21d0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21d0500 0x0 0x100>;
+			interrupts = <0 55 0x4>;
+			clocks = <&clockgen 4 0>;
+		};
+
+		duart3: serial@21d0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21d0600 0x0 0x100>;
+			interrupts = <0 55 0x4>;
+			clocks = <&clockgen 4 0>;
+		};
+	};
+};
diff --git a/arch/arm/dts/fsl-ls2085a-qds.dts b/arch/arm/dts/fsl-ls2080a-qds.dts
index 4477e54..547ec27 100644
--- a/arch/arm/dts/fsl-ls2085a-qds.dts
+++ b/arch/arm/dts/fsl-ls2080a-qds.dts
@@ -1,5 +1,5 @@
 /*
- * Freescale ls2085a QDS board device tree source
+ * Freescale ls2080a QDS board device tree source
  *
  * Copyright 2013-2015 Freescale Semiconductor, Inc.
  *
@@ -8,11 +8,11 @@
 
 /dts-v1/;
 
-#include "fsl-ls2085a.dtsi"
+#include "fsl-ls2080a.dtsi"
 
 / {
-	model = "Freescale Layerscape 2085a QDS Board";
-	compatible = "fsl,ls2085a-qds", "fsl,ls2085a";
+	model = "Freescale Layerscape 2080a QDS Board";
+	compatible = "fsl,ls2080a-qds", "fsl,ls2080a";
 
 	aliases {
 		spi1 = &dspi;
diff --git a/arch/arm/dts/fsl-ls2085a-rdb.dts b/arch/arm/dts/fsl-ls2080a-rdb.dts
index 25278df..1a1813b 100644
--- a/arch/arm/dts/fsl-ls2085a-rdb.dts
+++ b/arch/arm/dts/fsl-ls2080a-rdb.dts
@@ -1,5 +1,5 @@
 /*
- * Freescale ls2085a RDB board device tree source
+ * Freescale ls2080a RDB board device tree source
  *
  * Copyright 2013-2015 Freescale Semiconductor, Inc.
  *
@@ -8,11 +8,11 @@
 
 /dts-v1/;
 
-#include "fsl-ls2085a.dtsi"
+#include "fsl-ls2080a.dtsi"
 
 / {
-	model = "Freescale Layerscape 2085a RDB Board";
-	compatible = "fsl,ls2085a-rdb", "fsl,ls2085a";
+	model = "Freescale Layerscape 2080a RDB Board";
+	compatible = "fsl,ls2080a-rdb", "fsl,ls2080a";
 
 	aliases {
 		spi1 = &dspi;
diff --git a/arch/arm/dts/fsl-ls2085a.dtsi b/arch/arm/dts/fsl-ls2080a.dtsi
index 96404c5..a5c579c 100644
--- a/arch/arm/dts/fsl-ls2085a.dtsi
+++ b/arch/arm/dts/fsl-ls2080a.dtsi
@@ -1,5 +1,5 @@
 /*
- * Freescale ls2085a SOC common device tree source
+ * Freescale ls2080a SOC common device tree source
  *
  * Copyright 2013-2015 Freescale Semiconductor, Inc.
  *
@@ -7,7 +7,7 @@
  */
 
 / {
-	compatible = "fsl,ls2085a";
+	compatible = "fsl,ls2080a";
 	interrupt-parent = <&gic>;
 	#address-cells = <2>;
 	#size-cells = <2>;
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h
index 87bb937..b5a2d28 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/config.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h
@@ -17,10 +17,16 @@
 #define CONFIG_SYS_FSL_DDR		/* Freescale DDR driver */
 #define CONFIG_SYS_FSL_DDR_VER		FSL_DDR_VER_5_0
 
-#if defined(CONFIG_LS2085A)
+#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
 #define CONFIG_MAX_CPUS				16
 #define CONFIG_SYS_FSL_IFC_BANK_COUNT		8
+#ifdef CONFIG_LS2080A
+#define CONFIG_NUM_DDR_CONTROLLERS		2
+#endif
+#ifdef CONFIG_LS2085A
 #define CONFIG_NUM_DDR_CONTROLLERS		3
+#define CONFIG_SYS_FSL_HAS_DP_DDR
+#endif
 #define CONFIG_SYS_FSL_CLUSTER_CLOCKS		{ 1, 1, 4, 4 }
 #define	SRDS_MAX_LANES	8
 #define CONFIG_SYS_FSL_SRDS_1
@@ -44,6 +50,7 @@
 #define CONFIG_SYS_FSL_CCSR_SCFG_LE
 #define CONFIG_SYS_FSL_ESDHC_LE
 #define CONFIG_SYS_FSL_IFC_LE
+#define CONFIG_SYS_FSL_PEX_LUT_LE
 
 #define CONFIG_SYS_MEMAC_LITTLE_ENDIAN
 
@@ -60,6 +67,13 @@
 #define CCI_MN_DVM_DOMAIN_CTL		0x200
 #define CCI_MN_DVM_DOMAIN_CTL_SET	0x210
 
+#define CCI_HN_F_0_BASE			(CCI_MN_BASE + 0x200000)
+#define CCI_HN_F_1_BASE			(CCI_MN_BASE + 0x210000)
+#define CCN_HN_F_SAM_CTL		0x8	/* offset on base HN_F base */
+#define CCN_HN_F_SAM_NODEID_MASK	0x7f
+#define CCN_HN_F_SAM_NODEID_DDR0	0x4
+#define CCN_HN_F_SAM_NODEID_DDR1	0xe
+
 #define CCI_RN_I_0_BASE			(CCI_MN_BASE + 0x800000)
 #define CCI_RN_I_2_BASE			(CCI_MN_BASE + 0x820000)
 #define CCI_RN_I_6_BASE			(CCI_MN_BASE + 0x860000)
@@ -84,11 +98,20 @@
 #define TZPCDECPROT_2_SET_BASE			(TZPC_BASE + 0x81C)
 #define TZPCDECPROT_2_CLR_BASE			(TZPC_BASE + 0x820)
 
+#define DCSR_CGACRE5		0x700070914ULL
+#define EPU_EPCMPR5		0x700060914ULL
+#define EPU_EPCCR5		0x700060814ULL
+#define EPU_EPSMCR5		0x700060228ULL
+#define EPU_EPECR5		0x700060314ULL
+#define EPU_EPCTR5		0x700060a14ULL
+#define EPU_EPGCR		0x700060000ULL
+
 #define CONFIG_SYS_FSL_ERRATUM_A008336
 #define CONFIG_SYS_FSL_ERRATUM_A008511
 #define CONFIG_SYS_FSL_ERRATUM_A008514
 #define CONFIG_SYS_FSL_ERRATUM_A008585
 #define CONFIG_SYS_FSL_ERRATUM_A008751
+#define CONFIG_SYS_FSL_ERRATUM_A009635
 #elif defined(CONFIG_LS1043A)
 #define CONFIG_MAX_CPUS				4
 #define CONFIG_SYS_CACHELINE_SIZE		64
@@ -113,6 +136,7 @@
 #define CONFIG_SYS_FSL_WDOG_BE
 #define CONFIG_SYS_FSL_DSPI_BE
 #define CONFIG_SYS_FSL_QSPI_BE
+#define CONFIG_SYS_FSL_PEX_LUT_BE
 
 #define QE_MURAM_SIZE		0x6000UL
 #define MAX_QE_RISC		1
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
index 2903996..4544094 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
@@ -8,8 +8,8 @@
 #define _FSL_LAYERSCAPE_CPU_H
 
 static struct cpu_type cpu_type_list[] = {
-	CPU_TYPE_ENTRY(LS2085, LS2085, 8),
 	CPU_TYPE_ENTRY(LS2080, LS2080, 8),
+	CPU_TYPE_ENTRY(LS2085, LS2085, 8),
 	CPU_TYPE_ENTRY(LS2045, LS2045, 4),
 	CPU_TYPE_ENTRY(LS1043, LS1043, 4),
 };
@@ -103,7 +103,7 @@ struct sys_mmu_table {
 	u64 phys_addr;
 	u64 size;
 	u64 memory_type;
-	u64 share;
+	u64 attribute;
 };
 
 struct table_info {
@@ -115,7 +115,8 @@ struct table_info {
 static const struct sys_mmu_table early_mmu_table[] = {
 #ifdef CONFIG_FSL_LSCH3
 	{ CONFIG_SYS_FSL_CCSR_BASE, CONFIG_SYS_FSL_CCSR_BASE,
-	  CONFIG_SYS_FSL_CCSR_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_FSL_CCSR_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_FSL_OCRAM_BASE, CONFIG_SYS_FSL_OCRAM_BASE,
 	  CONFIG_SYS_FSL_OCRAM_SIZE, MT_NORMAL, PMD_SECT_NON_SHARE },
 	/* For IFC Region #1, only the first 4MB is cache-enabled */
@@ -129,17 +130,24 @@ static const struct sys_mmu_table early_mmu_table[] = {
 	  CONFIG_SYS_FSL_IFC_SIZE1, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
 	{ CONFIG_SYS_FSL_DRAM_BASE1, CONFIG_SYS_FSL_DRAM_BASE1,
 	  CONFIG_SYS_FSL_DRAM_SIZE1, MT_NORMAL, PMD_SECT_OUTER_SHARE },
+	/* Map IFC region #2 up to CONFIG_SYS_FLASH_BASE for NAND boot */
+	{ CONFIG_SYS_FSL_IFC_BASE2, CONFIG_SYS_FSL_IFC_BASE2,
+	  CONFIG_SYS_FLASH_BASE - CONFIG_SYS_FSL_IFC_BASE2,
+	  MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
 	{ CONFIG_SYS_FSL_DCSR_BASE, CONFIG_SYS_FSL_DCSR_BASE,
-	  CONFIG_SYS_FSL_DCSR_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_FSL_DCSR_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_FSL_DRAM_BASE2, CONFIG_SYS_FSL_DRAM_BASE2,
 	  CONFIG_SYS_FSL_DRAM_SIZE2, MT_NORMAL, PMD_SECT_OUTER_SHARE },
 #elif defined(CONFIG_FSL_LSCH2)
 	{ CONFIG_SYS_FSL_CCSR_BASE, CONFIG_SYS_FSL_CCSR_BASE,
-	  CONFIG_SYS_FSL_CCSR_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_FSL_CCSR_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_FSL_OCRAM_BASE, CONFIG_SYS_FSL_OCRAM_BASE,
 	  CONFIG_SYS_FSL_OCRAM_SIZE, MT_NORMAL, PMD_SECT_NON_SHARE },
 	{ CONFIG_SYS_FSL_DCSR_BASE, CONFIG_SYS_FSL_DCSR_BASE,
-	  CONFIG_SYS_FSL_DCSR_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_FSL_DCSR_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_FSL_IFC_BASE, CONFIG_SYS_FSL_IFC_BASE,
 	  CONFIG_SYS_FSL_IFC_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
 	{ CONFIG_SYS_FSL_DRAM_BASE1, CONFIG_SYS_FSL_DRAM_BASE1,
@@ -152,72 +160,93 @@ static const struct sys_mmu_table early_mmu_table[] = {
 static const struct sys_mmu_table final_mmu_table[] = {
 #ifdef CONFIG_FSL_LSCH3
 	{ CONFIG_SYS_FSL_CCSR_BASE, CONFIG_SYS_FSL_CCSR_BASE,
-	  CONFIG_SYS_FSL_CCSR_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_FSL_CCSR_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_FSL_OCRAM_BASE, CONFIG_SYS_FSL_OCRAM_BASE,
 	  CONFIG_SYS_FSL_OCRAM_SIZE, MT_NORMAL, PMD_SECT_NON_SHARE },
 	{ CONFIG_SYS_FSL_DRAM_BASE1, CONFIG_SYS_FSL_DRAM_BASE1,
 	  CONFIG_SYS_FSL_DRAM_SIZE1, MT_NORMAL, PMD_SECT_OUTER_SHARE },
 	{ CONFIG_SYS_FSL_QSPI_BASE2, CONFIG_SYS_FSL_QSPI_BASE2,
-	  CONFIG_SYS_FSL_QSPI_SIZE2, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_FSL_QSPI_SIZE2, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_FSL_IFC_BASE2, CONFIG_SYS_FSL_IFC_BASE2,
 	  CONFIG_SYS_FSL_IFC_SIZE2, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
 	{ CONFIG_SYS_FSL_DCSR_BASE, CONFIG_SYS_FSL_DCSR_BASE,
-	  CONFIG_SYS_FSL_DCSR_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_FSL_DCSR_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_FSL_MC_BASE, CONFIG_SYS_FSL_MC_BASE,
-	  CONFIG_SYS_FSL_MC_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_FSL_MC_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_FSL_NI_BASE, CONFIG_SYS_FSL_NI_BASE,
-	  CONFIG_SYS_FSL_NI_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_FSL_NI_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	/* For QBMAN portal, only the first 64MB is cache-enabled */
 	{ CONFIG_SYS_FSL_QBMAN_BASE, CONFIG_SYS_FSL_QBMAN_BASE,
-	  CONFIG_SYS_FSL_QBMAN_SIZE_1, MT_NORMAL, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_FSL_QBMAN_SIZE_1, MT_NORMAL,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_FSL_QBMAN_BASE + CONFIG_SYS_FSL_QBMAN_SIZE_1,
 	  CONFIG_SYS_FSL_QBMAN_BASE + CONFIG_SYS_FSL_QBMAN_SIZE_1,
 	  CONFIG_SYS_FSL_QBMAN_SIZE - CONFIG_SYS_FSL_QBMAN_SIZE_1,
-	  MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_PCIE1_PHYS_ADDR, CONFIG_SYS_PCIE1_PHYS_ADDR,
-	  CONFIG_SYS_PCIE1_PHYS_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_PCIE1_PHYS_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_PCIE2_PHYS_ADDR, CONFIG_SYS_PCIE2_PHYS_ADDR,
-	  CONFIG_SYS_PCIE2_PHYS_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_PCIE2_PHYS_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_PCIE3_PHYS_ADDR, CONFIG_SYS_PCIE3_PHYS_ADDR,
-	  CONFIG_SYS_PCIE3_PHYS_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
-#ifdef CONFIG_LS2085A
+	  CONFIG_SYS_PCIE3_PHYS_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
+#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
 	{ CONFIG_SYS_PCIE4_PHYS_ADDR, CONFIG_SYS_PCIE4_PHYS_ADDR,
-	  CONFIG_SYS_PCIE4_PHYS_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_PCIE4_PHYS_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 #endif
 	{ CONFIG_SYS_FSL_WRIOP1_BASE, CONFIG_SYS_FSL_WRIOP1_BASE,
-	  CONFIG_SYS_FSL_WRIOP1_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_FSL_WRIOP1_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_FSL_AIOP1_BASE, CONFIG_SYS_FSL_AIOP1_BASE,
-	  CONFIG_SYS_FSL_AIOP1_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_FSL_AIOP1_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_FSL_PEBUF_BASE, CONFIG_SYS_FSL_PEBUF_BASE,
-	  CONFIG_SYS_FSL_PEBUF_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_FSL_PEBUF_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_FSL_DRAM_BASE2, CONFIG_SYS_FSL_DRAM_BASE2,
 	  CONFIG_SYS_FSL_DRAM_SIZE2, MT_NORMAL, PMD_SECT_OUTER_SHARE },
 #elif defined(CONFIG_FSL_LSCH2)
 	{ CONFIG_SYS_FSL_BOOTROM_BASE, CONFIG_SYS_FSL_BOOTROM_BASE,
-	  CONFIG_SYS_FSL_BOOTROM_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_FSL_BOOTROM_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_FSL_CCSR_BASE, CONFIG_SYS_FSL_CCSR_BASE,
-	  CONFIG_SYS_FSL_CCSR_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_FSL_CCSR_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_FSL_OCRAM_BASE, CONFIG_SYS_FSL_OCRAM_BASE,
 	  CONFIG_SYS_FSL_OCRAM_SIZE, MT_NORMAL, PMD_SECT_NON_SHARE },
 	{ CONFIG_SYS_FSL_DCSR_BASE, CONFIG_SYS_FSL_DCSR_BASE,
-	  CONFIG_SYS_FSL_DCSR_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_FSL_DCSR_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_FSL_QSPI_BASE, CONFIG_SYS_FSL_QSPI_BASE,
-	  CONFIG_SYS_FSL_QSPI_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_FSL_QSPI_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_FSL_IFC_BASE, CONFIG_SYS_FSL_IFC_BASE,
 	  CONFIG_SYS_FSL_IFC_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
 	{ CONFIG_SYS_FSL_DRAM_BASE1, CONFIG_SYS_FSL_DRAM_BASE1,
 	  CONFIG_SYS_FSL_DRAM_SIZE1, MT_NORMAL,
 	  PMD_SECT_OUTER_SHARE | PMD_SECT_NS },
 	{ CONFIG_SYS_FSL_QBMAN_BASE, CONFIG_SYS_FSL_QBMAN_BASE,
-	  CONFIG_SYS_FSL_QBMAN_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_FSL_QBMAN_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_FSL_DRAM_BASE2, CONFIG_SYS_FSL_DRAM_BASE2,
 	  CONFIG_SYS_FSL_DRAM_SIZE2, MT_NORMAL, PMD_SECT_OUTER_SHARE },
 	{ CONFIG_SYS_PCIE1_PHYS_ADDR, CONFIG_SYS_PCIE1_PHYS_ADDR,
-	  CONFIG_SYS_PCIE1_PHYS_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_PCIE1_PHYS_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_PCIE2_PHYS_ADDR, CONFIG_SYS_PCIE2_PHYS_ADDR,
-	  CONFIG_SYS_PCIE2_PHYS_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_PCIE2_PHYS_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_PCIE3_PHYS_ADDR, CONFIG_SYS_PCIE3_PHYS_ADDR,
-	  CONFIG_SYS_PCIE3_PHYS_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_PCIE3_PHYS_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_FSL_DRAM_BASE3, CONFIG_SYS_FSL_DRAM_BASE3,
 	  CONFIG_SYS_FSL_DRAM_SIZE3, MT_NORMAL, PMD_SECT_OUTER_SHARE },
 #endif
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/fdt.h b/arch/arm/include/asm/arch-fsl-layerscape/fdt.h
index 4da73ab..099563e 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/fdt.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/fdt.h
@@ -11,4 +11,5 @@ void alloc_stream_ids(int start_id, int count, u32 *stream_ids, int max_cnt);
 void append_mmu_masters(void *blob, const char *smmu_path,
 			const char *master_name, u32 *stream_ids, int count);
 void fdt_fixup_smmu_pcie(void *blob);
+void fdt_fixup_board_enet(void *fdt);
 #endif	/* _ASM_ARMV8_FSL_LAYERSCAPE_FDT_H_ */
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
index e1043b5..d1fbde7 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
@@ -9,7 +9,7 @@
 
 #include <config.h>
 
-#if defined(CONFIG_LS2085A)
+#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
 enum srds_prtcl {
 	NONE = 0,
 	PCIE1,
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
index d941437..83caa91 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
@@ -30,9 +30,9 @@
 #define CONFIG_SYS_NS16550_COM2			(CONFIG_SYS_IMMR + 0x011c0600)
 #define CONFIG_SYS_NS16550_COM3			(CONFIG_SYS_IMMR + 0x011d0500)
 #define CONFIG_SYS_NS16550_COM4			(CONFIG_SYS_IMMR + 0x011d0600)
-#define CONFIG_SYS_FSL_XHCI_USB1_ADDR		(CONFIG_SYS_IMMR + 0x01f00000)
-#define CONFIG_SYS_FSL_XHCI_USB2_ADDR		(CONFIG_SYS_IMMR + 0x02000000)
-#define CONFIG_SYS_FSL_XHCI_USB3_ADDR		(CONFIG_SYS_IMMR + 0x02100000)
+#define CONFIG_SYS_LS1043A_XHCI_USB1_ADDR	(CONFIG_SYS_IMMR + 0x01f00000)
+#define CONFIG_SYS_LS1043A_XHCI_USB2_ADDR	(CONFIG_SYS_IMMR + 0x02000000)
+#define CONFIG_SYS_LS1043A_XHCI_USB3_ADDR	(CONFIG_SYS_IMMR + 0x02100000)
 #define CONFIG_SYS_PCIE1_ADDR			(CONFIG_SYS_IMMR + 0x2400000)
 #define CONFIG_SYS_PCIE2_ADDR			(CONFIG_SYS_IMMR + 0x2500000)
 #define CONFIG_SYS_PCIE3_ADDR			(CONFIG_SYS_IMMR + 0x2600000)
@@ -60,6 +60,10 @@
 #define CONFIG_SYS_PCIE1_PHYS_ADDR		0x4000000000ULL
 #define CONFIG_SYS_PCIE2_PHYS_ADDR		0x4800000000ULL
 #define CONFIG_SYS_PCIE3_PHYS_ADDR		0x5000000000ULL
+/* LUT registers */
+#define PCIE_LUT_BASE				0x10000
+#define PCIE_LUT_LCTRL0				0x7F8
+#define PCIE_LUT_DBG				0x7FC
 
 /* TZ Address Space Controller Definitions */
 #define TZASC1_BASE			0x01100000	/* as per CCSR map. */
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
index 6a70d44..cd96604 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
@@ -51,8 +51,8 @@
 #define I2C3_BASE_ADDR				(CONFIG_SYS_IMMR + 0x01020000)
 #define I2C4_BASE_ADDR				(CONFIG_SYS_IMMR + 0x01030000)
 
-#define CONFIG_SYS_LS2085A_XHCI_USB1_ADDR	(CONFIG_SYS_IMMR + 0x02100000)
-#define CONFIG_SYS_LS2085A_XHCI_USB2_ADDR	(CONFIG_SYS_IMMR + 0x02110000)
+#define CONFIG_SYS_LS2080A_XHCI_USB1_ADDR	(CONFIG_SYS_IMMR + 0x02100000)
+#define CONFIG_SYS_LS2080A_XHCI_USB2_ADDR	(CONFIG_SYS_IMMR + 0x02110000)
 
 /* TZ Address Space Controller Definitions */
 #define TZASC1_BASE			0x01100000	/* as per CCSR map. */
@@ -78,6 +78,10 @@
 #define CONFIG_SYS_PCIE2_PHYS_ADDR		0x1200000000ULL
 #define CONFIG_SYS_PCIE3_PHYS_ADDR		0x1400000000ULL
 #define CONFIG_SYS_PCIE4_PHYS_ADDR		0x1600000000ULL
+/* LUT registers */
+#define PCIE_LUT_BASE				0x80000
+#define PCIE_LUT_LCTRL0				0x7F8
+#define PCIE_LUT_DBG				0x7FC
 
 /* Device Configuration */
 #define DCFG_BASE		0x01e00000
@@ -115,7 +119,9 @@ struct sys_info {
 	unsigned long freq_processor[CONFIG_MAX_CPUS];
 	unsigned long freq_systembus;
 	unsigned long freq_ddrbus;
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
 	unsigned long freq_ddrbus2;
+#endif
 	unsigned long freq_localbus;
 	unsigned long freq_qe;
 #ifdef CONFIG_SYS_DPAA_FMAN
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/ls2085a_stream_id.h b/arch/arm/include/asm/arch-fsl-layerscape/ls2080a_stream_id.h
index 5c94530..954104b 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/ls2085a_stream_id.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/ls2080a_stream_id.h
@@ -7,7 +7,7 @@
 #ifndef __FSL_STREAM_ID_H
 #define __FSL_STREAM_ID_H
 
-/* Stream IDs on ls2085a devices are not hardwired and are
+/* Stream IDs on ls2080a devices are not hardwired and are
  * programmed by sw.  There are a limited number of stream IDs
  * available, and the partitioning of them is scenario dependent.
  * This header defines the partitioning between legacy, PCI,
@@ -17,7 +17,7 @@
  * on the specific hardware config-- e.g. perhaps not all
  * PEX controllers are in use.
  *
- * On LS2085 stream IDs are programmed in AMQ registers (32-bits) for
+ * On LS2080 stream IDs are programmed in AMQ registers (32-bits) for
  * each of the different bus masters.  The relationship between
  * the AMQ registers and stream IDs is defined in the table below:
  *          AMQ bit    streamID bit
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/soc.h b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
index 5ed456e..504c1f9 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/soc.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
@@ -23,6 +23,14 @@
 #define scfg_out32(a, v)   out_be32(a, v)
 #endif
 
+#ifdef CONFIG_SYS_FSL_PEX_LUT_LE
+#define pex_lut_in32(a)       in_le32(a)
+#define pex_lut_out32(a, v)   out_le32(a, v)
+#elif defined(CONFIG_SYS_FSL_PEX_LUT_BE)
+#define pex_lut_in32(a)       in_be32(a)
+#define pex_lut_out32(a, v)   out_be32(a, v)
+#endif
+
 struct cpu_type {
 	char name[15];
 	u32 soc_ver;
@@ -50,4 +58,7 @@ void fsl_lsch2_early_init_f(void);
 #endif
 
 void cpu_name(char *name);
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009635
+void erratum_a009635(void);
+#endif
 #endif /* _ASM_ARMV8_FSL_LAYERSCAPE_SOC_H_ */
diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
index 09ed980..1bcdf04 100644
--- a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
+++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
@@ -31,7 +31,7 @@
 #define RCWSR4_SRDS1_PRTCL_SHIFT	24
 #define RCWSR4_SRDS1_PRTCL_MASK		0xff000000
 
-#define TIMER_COMP_VAL			0xffffffff
+#define TIMER_COMP_VAL			0xffffffffffffffffull
 #define ARCH_TIMER_CTRL_ENABLE		(1 << 0)
 #define SYS_COUNTER_CTRL_ENABLE		(1 << 24)
 
diff --git a/arch/arm/include/asm/armv8/mmu.h b/arch/arm/include/asm/armv8/mmu.h
index d8d9af4..2e2a3a8 100644
--- a/arch/arm/include/asm/armv8/mmu.h
+++ b/arch/arm/include/asm/armv8/mmu.h
@@ -119,7 +119,7 @@
 
 void set_pgtable_section(u64 *page_table, u64 index,
 			 u64 section, u64 memory_type,
-			 u64 share);
+			 u64 attribute);
 void set_pgtable_table(u64 *page_table, u64 index,
 		       u64 *table_addr);
 
diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h
index 4e3ea55..bd27281 100644
--- a/arch/arm/include/asm/global_data.h
+++ b/arch/arm/include/asm/global_data.h
@@ -46,7 +46,7 @@ struct arch_global_data {
 	u32 omap_boot_mode;
 	u8 omap_ch_flags;
 #endif
-#ifdef CONFIG_FSL_LSCH3
+#if defined(CONFIG_FSL_LSCH3) && defined(CONFIG_SYS_FSL_HAS_DP_DDR)
 	unsigned long mem2_clk;
 #endif
 };
diff --git a/board/freescale/common/vid.c b/board/freescale/common/vid.c
index 6b8af14..f1bed51 100644
--- a/board/freescale/common/vid.c
+++ b/board/freescale/common/vid.c
@@ -7,7 +7,12 @@
 #include <common.h>
 #include <command.h>
 #include <i2c.h>
+#include <asm/io.h>
+#ifdef CONFIG_LS1043A
+#include <asm/arch/immap_lsch2.h>
+#else
 #include <asm/immap_85xx.h>
+#endif
 #include "vid.h"
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -240,7 +245,11 @@ static int set_voltage_to_IR(int i2caddress, int vdd)
 	 * SoC before converting into an IR VID value
 	 */
 	vdd += board_vdd_drop_compensation();
+#ifdef CONFIG_LS1043A
+	vid = DIV_ROUND_UP(vdd - 265, 5);
+#else
 	vid = DIV_ROUND_UP(vdd - 245, 5);
+#endif
 
 	ret = i2c_write(i2caddress, IR36021_LOOP1_MANUAL_ID_OFFSET,
 			1, (void *)&vid, sizeof(vid));
@@ -276,8 +285,12 @@ static int set_voltage(int i2caddress, int vdd)
 int adjust_vdd(ulong vdd_override)
 {
 	int re_enable = disable_interrupts();
+#ifdef CONFIG_LS1043A
+	struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+#else
 	ccsr_gur_t __iomem *gur =
 		(void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+#endif
 	u32 fusesr;
 	u8 vid;
 	int vdd_target, vdd_current, vdd_last;
@@ -352,12 +365,21 @@ int adjust_vdd(ulong vdd_override)
 	 * | T |          |         |                 |         |
 	 * ------------------------------------------------------
 	 */
+#ifdef CONFIG_LS1043A
+	vid = (fusesr >> FSL_CHASSIS2_DCFG_FUSESR_ALTVID_SHIFT) &
+		FSL_CHASSIS2_DCFG_FUSESR_ALTVID_MASK;
+	if ((vid == 0) || (vid == FSL_CHASSIS2_DCFG_FUSESR_ALTVID_MASK)) {
+		vid = (fusesr >> FSL_CHASSIS2_DCFG_FUSESR_VID_SHIFT) &
+			FSL_CHASSIS2_DCFG_FUSESR_VID_MASK;
+	}
+#else
 	vid = (fusesr >> FSL_CORENET_DCFG_FUSESR_ALTVID_SHIFT) &
 		FSL_CORENET_DCFG_FUSESR_ALTVID_MASK;
 	if ((vid == 0) || (vid == FSL_CORENET_DCFG_FUSESR_ALTVID_MASK)) {
 		vid = (fusesr >> FSL_CORENET_DCFG_FUSESR_VID_SHIFT) &
 			FSL_CORENET_DCFG_FUSESR_VID_MASK;
 	}
+#endif
 	vdd_target = vdd[vid];
 
 	/* check override variable for overriding VDD */
diff --git a/board/freescale/ls1043aqds/Kconfig b/board/freescale/ls1043aqds/Kconfig
new file mode 100644
index 0000000..7e27f8f
--- /dev/null
+++ b/board/freescale/ls1043aqds/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_LS1043AQDS
+
+config SYS_BOARD
+	default "ls1043aqds"
+
+config SYS_VENDOR
+	default "freescale"
+
+config SYS_SOC
+	default "fsl-layerscape"
+
+config SYS_CONFIG_NAME
+	default "ls1043aqds"
+
+endif
diff --git a/board/freescale/ls1043aqds/MAINTAINERS b/board/freescale/ls1043aqds/MAINTAINERS
new file mode 100644
index 0000000..0c7f648
--- /dev/null
+++ b/board/freescale/ls1043aqds/MAINTAINERS
@@ -0,0 +1,9 @@
+LS1043AQDS BOARD
+M:	Mingkai Hu <Mingkai.Hu@freescale.com>
+S:	Maintained
+F:	board/freescale/ls1043aqds/
+F:	include/configs/ls1043aqds.h
+F:	configs/ls1043aqds_defconfig
+F:	configs/ls1043aqds_nor_ddr3_defconfig
+F:	configs/ls1043aqds_nand_defconfig
+F:	configs/ls1043aqds_sdcard_ifc_defconfig
diff --git a/board/freescale/ls1043aqds/Makefile b/board/freescale/ls1043aqds/Makefile
new file mode 100644
index 0000000..f727bfd
--- /dev/null
+++ b/board/freescale/ls1043aqds/Makefile
@@ -0,0 +1,9 @@
+#
+# Copyright 2015 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+
+obj-y += ddr.o
+obj-y += eth.o
+obj-y += ls1043aqds.o
diff --git a/board/freescale/ls1043aqds/README b/board/freescale/ls1043aqds/README
new file mode 100644
index 0000000..6261a77
--- /dev/null
+++ b/board/freescale/ls1043aqds/README
@@ -0,0 +1,96 @@
+Overview
+--------
+The LS1043A Development System (QDS) is a high-performance computing,
+evaluation, and development platform that supports the QorIQ LS1043A
+LayerScape Architecture processor. The LS1043AQDS provides SW development
+platform for the Freescale LS1043A processor series, with a complete
+debugging environment.
+
+LS1043A SoC Overview
+--------------------
+The LS1043A integrated multicore processor combines four ARM Cortex-A53
+processor cores with datapath acceleration optimized for L2/3 packet
+processing, single pass security offload and robust traffic management
+and quality of service.
+
+The LS1043A SoC includes the following function and features:
+ - Four 64-bit ARM Cortex-A53 CPUs
+ - 1 MB unified L2 Cache
+ - One 32-bit DDR3L/DDR4 SDRAM memory controllers with ECC and interleaving
+   support
+ - Data Path Acceleration Architecture (DPAA) incorporating acceleration the
+   the following functions:
+   - Packet parsing, classification, and distribution (FMan)
+   - Queue management for scheduling, packet sequencing, and congestion
+     management (QMan)
+   - Hardware buffer management for buffer allocation and de-allocation (BMan)
+   - Cryptography acceleration (SEC)
+ - Ethernet interfaces by FMan
+   - Up to 1 x XFI supporting 10G interface
+   - Up to 1 x QSGMII
+   - Up to 4 x SGMII supporting 1000Mbps
+   - Up to 2 x SGMII supporting 2500Mbps
+   - Up to 2 x RGMII supporting 1000Mbps
+ - High-speed peripheral interfaces
+   - Three PCIe 2.0 controllers, one supporting x4 operation
+   - One serial ATA (SATA 3.0) controllers
+ - Additional peripheral interfaces
+   - Three high-speed USB 3.0 controllers with integrated PHY
+   - Enhanced secure digital host controller (eSDXC/eMMC)
+   - Quad Serial Peripheral Interface (QSPI) Controller
+   - Serial peripheral interface (SPI) controller
+   - Four I2C controllers
+   - Two DUARTs
+   - Integrated flash controller supporting NAND and NOR flash
+ - QorIQ platform's trust architecture 2.1
+
+ LS1043AQDS board Overview
+ -----------------------
+ - SERDES Connections, 4 lanes supporting:
+      - PCI Express - 3.0
+      - SGMII, SGMII 2.5
+      - QSGMII
+      - SATA 3.0
+      - XFI
+ - DDR Controller
+     - 2GB 40bits (8-bits ECC) DDR4 SDRAM. Support rates of up to 1600MT/s
+ -IFC/Local Bus
+    - One in-socket 128 MB NOR flash 16-bit data bus
+    - One 512 MB NAND flash with ECC support
+    - PromJet Port
+    - FPGA connection
+ - USB 3.0
+    - Three high speed USB 3.0 ports
+    - First USB 3.0 port configured as Host with Type-A connector
+    - The other two USB 3.0 ports configured as OTG with micro-AB connector
+ - SDHC port connects directly to an adapter card slot, featuring:
+    - Optional clock feedback paths, and optional high-speed voltage translation assistance
+    - SD slots for SD, SDHC (1x, 4x, 8x), and/or MMC
+    - eMMC memory devices
+ - DSPI: Onboard support for three SPI flash memory devices
+ - 4 I2C controllers
+ - One SATA onboard connectors
+ - UART
+   - Two 4-pin serial ports at up to 115.2 Kbit/s
+   - Two DB9 D-Type connectors supporting one Serial port each
+ - ARM JTAG support
+
+Memory map from core's view
+----------------------------
+Start Address	End Address	Description		Size
+0x00_0000_0000	0x00_000F_FFFF	Secure Boot ROM		1MB
+0x00_0100_0000	0x00_0FFF_FFFF	CCSRBAR			240MB
+0x00_1000_0000	0x00_1000_FFFF	OCRAM0			64KB
+0x00_1001_0000	0x00_1001_FFFF	OCRAM1			64KB
+0x00_2000_0000	0x00_20FF_FFFF	DCSR			16MB
+0x00_6000_0000	0x00_67FF_FFFF	IFC - NOR Flash		128MB
+0x00_7E80_0000	0x00_7E80_FFFF	IFC - NAND Flash	64KB
+0x00_7FB0_0000	0x00_7FB0_0FFF	IFC - FPGA		4KB
+0x00_8000_0000	0x00_FFFF_FFFF	DRAM1			2GB
+
+Booting Options
+---------------
+a) Promjet Boot
+b) NOR boot
+c) NAND boot
+d) SD boot
diff --git a/board/freescale/ls1043aqds/ddr.c b/board/freescale/ls1043aqds/ddr.c
new file mode 100644
index 0000000..705e384
--- /dev/null
+++ b/board/freescale/ls1043aqds/ddr.c
@@ -0,0 +1,131 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
+#ifdef CONFIG_FSL_DEEP_SLEEP
+#include <fsl_sleep.h>
+#endif
+#include "ddr.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+			   dimm_params_t *pdimm,
+			   unsigned int ctrl_num)
+{
+	const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
+	ulong ddr_freq;
+
+	if (ctrl_num > 3) {
+		printf("Not supported controller number %d\n", ctrl_num);
+		return;
+	}
+	if (!pdimm->n_ranks)
+		return;
+
+	pbsp = udimms[0];
+
+	/* Get clk_adjust, wrlvl_start, wrlvl_ctl, according to the board ddr
+	 * freqency and n_banks specified in board_specific_parameters table.
+	 */
+	ddr_freq = get_ddr_freq(0) / 1000000;
+	while (pbsp->datarate_mhz_high) {
+		if (pbsp->n_ranks == pdimm->n_ranks) {
+			if (ddr_freq <= pbsp->datarate_mhz_high) {
+				popts->clk_adjust = pbsp->clk_adjust;
+				popts->wrlvl_start = pbsp->wrlvl_start;
+				popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
+				popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
+				popts->cpo_override = pbsp->cpo_override;
+				popts->write_data_delay =
+					pbsp->write_data_delay;
+				goto found;
+			}
+			pbsp_highest = pbsp;
+		}
+		pbsp++;
+	}
+
+	if (pbsp_highest) {
+		printf("Error: board specific timing not found for %lu MT/s\n",
+		       ddr_freq);
+		printf("Trying to use the highest speed (%u) parameters\n",
+		       pbsp_highest->datarate_mhz_high);
+		popts->clk_adjust = pbsp_highest->clk_adjust;
+		popts->wrlvl_start = pbsp_highest->wrlvl_start;
+		popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
+		popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
+	} else {
+		panic("DIMM is not supported by this board");
+	}
+found:
+	debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n",
+	      pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb);
+
+	/* force DDR bus width to 32 bits */
+	popts->data_bus_width = 1;
+	popts->otf_burst_chop_en = 0;
+	popts->burst_length = DDR_BL8;
+	popts->bstopre = 0;		/* enable auto precharge */
+
+	/*
+	 * Factors to consider for half-strength driver enable:
+	 *	- number of DIMMs installed
+	 */
+	popts->half_strength_driver_enable = 1;
+	/*
+	 * Write leveling override
+	 */
+	popts->wrlvl_override = 1;
+	popts->wrlvl_sample = 0xf;
+
+	/*
+	 * Rtt and Rtt_WR override
+	 */
+	popts->rtt_override = 0;
+
+	/* Enable ZQ calibration */
+	popts->zq_en = 1;
+
+#ifdef CONFIG_SYS_FSL_DDR4
+	popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_80ohm);
+	popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_80ohm) |
+			  DDR_CDR2_VREF_OVRD(70);	/* Vref = 70% */
+#else
+	popts->cswl_override = DDR_CSWL_CS0;
+
+	/* DHC_EN =1, ODT = 75 Ohm */
+	popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm);
+	popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm);
+#endif
+}
+
+phys_size_t initdram(int board_type)
+{
+	phys_size_t dram_size;
+
+#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD)
+	return fsl_ddr_sdram_size();
+#else
+	puts("Initializing DDR....using SPD\n");
+
+	dram_size = fsl_ddr_sdram();
+#endif
+
+#ifdef CONFIG_FSL_DEEP_SLEEP
+	fsl_dp_ddr_restore();
+#endif
+
+	return dram_size;
+}
+
+void dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_dram[0].size = gd->ram_size;
+}
diff --git a/board/freescale/ls1043aqds/ddr.h b/board/freescale/ls1043aqds/ddr.h
new file mode 100644
index 0000000..8adb660
--- /dev/null
+++ b/board/freescale/ls1043aqds/ddr.h
@@ -0,0 +1,60 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __DDR_H__
+#define __DDR_H__
+
+struct board_specific_parameters {
+	u32 n_ranks;
+	u32 datarate_mhz_high;
+	u32 rank_gb;
+	u32 clk_adjust;
+	u32 wrlvl_start;
+	u32 wrlvl_ctl_2;
+	u32 wrlvl_ctl_3;
+	u32 cpo_override;
+	u32 write_data_delay;
+	u32 force_2t;
+};
+
+/*
+ * These tables contain all valid speeds we want to override with board
+ * specific parameters. datarate_mhz_high values need to be in ascending order
+ * for each n_ranks group.
+ */
+static const struct board_specific_parameters udimm0[] = {
+	/*
+	 * memory controller 0
+	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl | cpo  |wrdata|2T
+	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3  |      |delay |
+	 */
+#ifdef CONFIG_SYS_FSL_DDR4
+	{2,  1666, 0, 4,     7, 0x0808090B, 0x0C0D0E0A,},
+	{2,  1900, 0, 4,     6, 0x08080A0C, 0x0D0E0F0A,},
+	{1,  1666, 0, 4,     6, 0x0708090B, 0x0C0D0E0A,},
+	{1,  1900, 0, 4,     9, 0x0A0B0C0B, 0x0D0E0F0D,},
+	{1,  2200, 0, 4,    10, 0x0B0C0D0C, 0x0E0F110E,},
+#elif defined(CONFIG_SYS_FSL_DDR3)
+	{1,  833,  1, 6,     8, 0x06060607, 0x08080807,   0x1f,    2,  0},
+	{1,  1350, 1, 6,     8, 0x0708080A, 0x0A0B0C09,   0x1f,    2,  0},
+	{1,  833,  2, 6,     8, 0x06060607, 0x08080807,   0x1f,    2,  0},
+	{1,  1350, 2, 6,     8, 0x0708080A, 0x0A0B0C09,   0x1f,    2,  0},
+	{2,  833,  4, 6,     8, 0x06060607, 0x08080807,   0x1f,    2,  0},
+	{2,  1350, 4, 6,     8, 0x0708080A, 0x0A0B0C09,   0x1f,    2,  0},
+	{2,  1350, 0, 6,     8, 0x0708080A, 0x0A0B0C09,   0x1f,    2,  0},
+	{2,  1666, 4, 4,   0xa, 0x0B08090C, 0x0B0E0D0A,   0x1f,    2,  0},
+	{2,  1666, 0, 4,   0xa, 0x0B08090C, 0x0B0E0D0A,   0x1f,    2,  0},
+#else
+#error DDR type not defined
+#endif
+	{}
+};
+
+static const struct board_specific_parameters *udimms[] = {
+	udimm0,
+};
+
+#endif
diff --git a/board/freescale/ls1043aqds/eth.c b/board/freescale/ls1043aqds/eth.c
new file mode 100644
index 0000000..b7fc360
--- /dev/null
+++ b/board/freescale/ls1043aqds/eth.c
@@ -0,0 +1,492 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <netdev.h>
+#include <fm_eth.h>
+#include <fsl_mdio.h>
+#include <fsl_dtsec.h>
+#include <malloc.h>
+#include <asm/arch/fsl_serdes.h>
+
+#include "../common/qixis.h"
+#include "../common/fman.h"
+#include "ls1043aqds_qixis.h"
+
+#define EMI_NONE	0xFF
+#define EMI1_RGMII1	0
+#define EMI1_RGMII2	1
+#define EMI1_SLOT1	2
+#define EMI1_SLOT2	3
+#define EMI1_SLOT3	4
+#define EMI1_SLOT4	5
+#define EMI2		6
+
+static int mdio_mux[NUM_FM_PORTS];
+
+static const char * const mdio_names[] = {
+	"LS1043AQDS_MDIO_RGMII1",
+	"LS1043AQDS_MDIO_RGMII2",
+	"LS1043AQDS_MDIO_SLOT1",
+	"LS1043AQDS_MDIO_SLOT2",
+	"LS1043AQDS_MDIO_SLOT3",
+	"LS1043AQDS_MDIO_SLOT4",
+	"NULL",
+};
+
+/* Map SerDes1 4 lanes to default slot, will be initialized dynamically */
+static u8 lane_to_slot[] = {1, 2, 3, 4};
+
+static const char *ls1043aqds_mdio_name_for_muxval(u8 muxval)
+{
+	return mdio_names[muxval];
+}
+
+struct mii_dev *mii_dev_for_muxval(u8 muxval)
+{
+	struct mii_dev *bus;
+	const char *name;
+
+	if (muxval > EMI2)
+		return NULL;
+
+	name = ls1043aqds_mdio_name_for_muxval(muxval);
+
+	if (!name) {
+		printf("No bus for muxval %x\n", muxval);
+		return NULL;
+	}
+
+	bus = miiphy_get_dev_by_name(name);
+
+	if (!bus) {
+		printf("No bus by name %s\n", name);
+		return NULL;
+	}
+
+	return bus;
+}
+
+struct ls1043aqds_mdio {
+	u8 muxval;
+	struct mii_dev *realbus;
+};
+
+static void ls1043aqds_mux_mdio(u8 muxval)
+{
+	u8 brdcfg4;
+
+	if (muxval < 7) {
+		brdcfg4 = QIXIS_READ(brdcfg[4]);
+		brdcfg4 &= ~BRDCFG4_EMISEL_MASK;
+		brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT);
+		QIXIS_WRITE(brdcfg[4], brdcfg4);
+	}
+}
+
+static int ls1043aqds_mdio_read(struct mii_dev *bus, int addr, int devad,
+			      int regnum)
+{
+	struct ls1043aqds_mdio *priv = bus->priv;
+
+	ls1043aqds_mux_mdio(priv->muxval);
+
+	return priv->realbus->read(priv->realbus, addr, devad, regnum);
+}
+
+static int ls1043aqds_mdio_write(struct mii_dev *bus, int addr, int devad,
+			       int regnum, u16 value)
+{
+	struct ls1043aqds_mdio *priv = bus->priv;
+
+	ls1043aqds_mux_mdio(priv->muxval);
+
+	return priv->realbus->write(priv->realbus, addr, devad,
+				    regnum, value);
+}
+
+static int ls1043aqds_mdio_reset(struct mii_dev *bus)
+{
+	struct ls1043aqds_mdio *priv = bus->priv;
+
+	return priv->realbus->reset(priv->realbus);
+}
+
+static int ls1043aqds_mdio_init(char *realbusname, u8 muxval)
+{
+	struct ls1043aqds_mdio *pmdio;
+	struct mii_dev *bus = mdio_alloc();
+
+	if (!bus) {
+		printf("Failed to allocate ls1043aqds MDIO bus\n");
+		return -1;
+	}
+
+	pmdio = malloc(sizeof(*pmdio));
+	if (!pmdio) {
+		printf("Failed to allocate ls1043aqds private data\n");
+		free(bus);
+		return -1;
+	}
+
+	bus->read = ls1043aqds_mdio_read;
+	bus->write = ls1043aqds_mdio_write;
+	bus->reset = ls1043aqds_mdio_reset;
+	sprintf(bus->name, ls1043aqds_mdio_name_for_muxval(muxval));
+
+	pmdio->realbus = miiphy_get_dev_by_name(realbusname);
+
+	if (!pmdio->realbus) {
+		printf("No bus with name %s\n", realbusname);
+		free(bus);
+		free(pmdio);
+		return -1;
+	}
+
+	pmdio->muxval = muxval;
+	bus->priv = pmdio;
+	return mdio_register(bus);
+}
+
+void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
+			      enum fm_port port, int offset)
+{
+	struct fixed_link f_link;
+
+	if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII) {
+		if (port == FM1_DTSEC9) {
+			fdt_set_phy_handle(fdt, compat, addr,
+					   "sgmii_riser_s1_p1");
+		} else if (port == FM1_DTSEC2) {
+			fdt_set_phy_handle(fdt, compat, addr,
+					   "sgmii_riser_s2_p1");
+		} else if (port == FM1_DTSEC5) {
+			fdt_set_phy_handle(fdt, compat, addr,
+					   "sgmii_riser_s3_p1");
+		} else if (port == FM1_DTSEC6) {
+			fdt_set_phy_handle(fdt, compat, addr,
+					   "sgmii_riser_s4_p1");
+		}
+	} else if (fm_info_get_enet_if(port) ==
+		   PHY_INTERFACE_MODE_SGMII_2500) {
+		/* 2.5G SGMII interface */
+		f_link.phy_id = port;
+		f_link.duplex = 1;
+		f_link.link_speed = 1000;
+		f_link.pause = 0;
+		f_link.asym_pause = 0;
+		/* no PHY for 2.5G SGMII */
+		fdt_delprop(fdt, offset, "phy-handle");
+		fdt_setprop(fdt, offset, "fixed-link", &f_link, sizeof(f_link));
+		fdt_setprop_string(fdt, offset, "phy-connection-type",
+				   "sgmii-2500");
+	} else if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_QSGMII) {
+		switch (mdio_mux[port]) {
+		case EMI1_SLOT1:
+			switch (port) {
+			case FM1_DTSEC1:
+				fdt_set_phy_handle(fdt, compat, addr,
+						   "qsgmii_s1_p1");
+				break;
+			case FM1_DTSEC2:
+				fdt_set_phy_handle(fdt, compat, addr,
+						   "qsgmii_s1_p2");
+				break;
+			case FM1_DTSEC5:
+				fdt_set_phy_handle(fdt, compat, addr,
+						   "qsgmii_s1_p3");
+				break;
+			case FM1_DTSEC6:
+				fdt_set_phy_handle(fdt, compat, addr,
+						   "qsgmii_s1_p4");
+				break;
+			default:
+				break;
+			}
+			break;
+		case EMI1_SLOT2:
+			switch (port) {
+			case FM1_DTSEC1:
+				fdt_set_phy_handle(fdt, compat, addr,
+						   "qsgmii_s2_p1");
+				break;
+			case FM1_DTSEC2:
+				fdt_set_phy_handle(fdt, compat, addr,
+						   "qsgmii_s2_p2");
+				break;
+			case FM1_DTSEC5:
+				fdt_set_phy_handle(fdt, compat, addr,
+						   "qsgmii_s2_p3");
+				break;
+			case FM1_DTSEC6:
+				fdt_set_phy_handle(fdt, compat, addr,
+						   "qsgmii_s2_p4");
+				break;
+			default:
+				break;
+			}
+			break;
+		default:
+			break;
+		}
+		fdt_delprop(fdt, offset, "phy-connection-type");
+		fdt_setprop_string(fdt, offset, "phy-connection-type",
+				   "qsgmii");
+	} else if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_XGMII &&
+		   port == FM1_10GEC1) {
+		/* XFI interface */
+		f_link.phy_id = port;
+		f_link.duplex = 1;
+		f_link.link_speed = 10000;
+		f_link.pause = 0;
+		f_link.asym_pause = 0;
+		/* no PHY for XFI */
+		fdt_delprop(fdt, offset, "phy-handle");
+		fdt_setprop(fdt, offset, "fixed-link", &f_link, sizeof(f_link));
+		fdt_setprop_string(fdt, offset, "phy-connection-type", "xgmii");
+	}
+}
+
+void fdt_fixup_board_enet(void *fdt)
+{
+	int i;
+	struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	u32 srds_s1;
+
+	srds_s1 = in_be32(&gur->rcwsr[4]) &
+			FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK;
+	srds_s1 >>= FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT;
+
+	for (i = FM1_DTSEC1; i < NUM_FM_PORTS; i++) {
+		switch (fm_info_get_enet_if(i)) {
+		case PHY_INTERFACE_MODE_SGMII:
+		case PHY_INTERFACE_MODE_QSGMII:
+			switch (mdio_mux[i]) {
+			case EMI1_SLOT1:
+				fdt_status_okay_by_alias(fdt, "emi1_slot1");
+				break;
+			case EMI1_SLOT2:
+				fdt_status_okay_by_alias(fdt, "emi1_slot2");
+				break;
+			case EMI1_SLOT3:
+				fdt_status_okay_by_alias(fdt, "emi1_slot3");
+				break;
+			case EMI1_SLOT4:
+				fdt_status_okay_by_alias(fdt, "emi1_slot4");
+				break;
+			default:
+				break;
+			}
+			break;
+		case PHY_INTERFACE_MODE_XGMII:
+			break;
+		default:
+			break;
+		}
+	}
+}
+
+int board_eth_init(bd_t *bis)
+{
+#ifdef CONFIG_FMAN_ENET
+	int i, idx, lane, slot, interface;
+	struct memac_mdio_info dtsec_mdio_info;
+	struct memac_mdio_info tgec_mdio_info;
+	struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	u32 srds_s1;
+
+	srds_s1 = in_be32(&gur->rcwsr[4]) &
+			FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK;
+	srds_s1 >>= FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT;
+
+	/* Initialize the mdio_mux array so we can recognize empty elements */
+	for (i = 0; i < NUM_FM_PORTS; i++)
+		mdio_mux[i] = EMI_NONE;
+
+	dtsec_mdio_info.regs =
+		(struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR;
+
+	dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
+
+	/* Register the 1G MDIO bus */
+	fm_memac_mdio_init(bis, &dtsec_mdio_info);
+
+	tgec_mdio_info.regs =
+		(struct memac_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR;
+	tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME;
+
+	/* Register the 10G MDIO bus */
+	fm_memac_mdio_init(bis, &tgec_mdio_info);
+
+	/* Register the muxing front-ends to the MDIO buses */
+	ls1043aqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII1);
+	ls1043aqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII2);
+	ls1043aqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT1);
+	ls1043aqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT2);
+	ls1043aqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT3);
+	ls1043aqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT4);
+	ls1043aqds_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, EMI2);
+
+	/* Set the two on-board RGMII PHY address */
+	fm_info_set_phy_address(FM1_DTSEC3, RGMII_PHY1_ADDR);
+	fm_info_set_phy_address(FM1_DTSEC4, RGMII_PHY2_ADDR);
+
+	switch (srds_s1) {
+	case 0x2555:
+		/* 2.5G SGMII on lane A, MAC 9 */
+		fm_info_set_phy_address(FM1_DTSEC9, 9);
+		break;
+	case 0x4555:
+	case 0x4558:
+		/* QSGMII on lane A, MAC 1/2/5/6 */
+		fm_info_set_phy_address(FM1_DTSEC1,
+					QSGMII_CARD_PORT1_PHY_ADDR_S1);
+		fm_info_set_phy_address(FM1_DTSEC2,
+					QSGMII_CARD_PORT2_PHY_ADDR_S1);
+		fm_info_set_phy_address(FM1_DTSEC5,
+					QSGMII_CARD_PORT3_PHY_ADDR_S1);
+		fm_info_set_phy_address(FM1_DTSEC6,
+					QSGMII_CARD_PORT4_PHY_ADDR_S1);
+		break;
+	case 0x1355:
+		/* SGMII on lane B, MAC 2*/
+		fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT1_PHY_ADDR);
+		break;
+	case 0x2355:
+		/* 2.5G SGMII on lane A, MAC 9 */
+		fm_info_set_phy_address(FM1_DTSEC9, 9);
+		/* SGMII on lane B, MAC 2*/
+		fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT1_PHY_ADDR);
+		break;
+	case 0x3335:
+		/* SGMII on lane C, MAC 5 */
+		fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR);
+	case 0x3355:
+	case 0x3358:
+		/* SGMII on lane B, MAC 2 */
+		fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT1_PHY_ADDR);
+	case 0x3555:
+	case 0x3558:
+		/* SGMII on lane A, MAC 9 */
+		fm_info_set_phy_address(FM1_DTSEC9, SGMII_CARD_PORT1_PHY_ADDR);
+		break;
+	case 0x1455:
+		/* QSGMII on lane B, MAC 1/2/5/6 */
+		fm_info_set_phy_address(FM1_DTSEC1,
+					QSGMII_CARD_PORT1_PHY_ADDR_S2);
+		fm_info_set_phy_address(FM1_DTSEC2,
+					QSGMII_CARD_PORT2_PHY_ADDR_S2);
+		fm_info_set_phy_address(FM1_DTSEC5,
+					QSGMII_CARD_PORT3_PHY_ADDR_S2);
+		fm_info_set_phy_address(FM1_DTSEC6,
+					QSGMII_CARD_PORT4_PHY_ADDR_S2);
+		break;
+	case 0x2455:
+		/* 2.5G SGMII on lane A, MAC 9 */
+		fm_info_set_phy_address(FM1_DTSEC9, 9);
+		/* QSGMII on lane B, MAC 1/2/5/6 */
+		fm_info_set_phy_address(FM1_DTSEC1,
+					QSGMII_CARD_PORT1_PHY_ADDR_S2);
+		fm_info_set_phy_address(FM1_DTSEC2,
+					QSGMII_CARD_PORT2_PHY_ADDR_S2);
+		fm_info_set_phy_address(FM1_DTSEC5,
+					QSGMII_CARD_PORT3_PHY_ADDR_S2);
+		fm_info_set_phy_address(FM1_DTSEC6,
+					QSGMII_CARD_PORT4_PHY_ADDR_S2);
+		break;
+	case 0x2255:
+		/* 2.5G SGMII on lane A, MAC 9 */
+		fm_info_set_phy_address(FM1_DTSEC9, 9);
+		/* 2.5G SGMII on lane B, MAC 2 */
+		fm_info_set_phy_address(FM1_DTSEC2, 2);
+		break;
+	case 0x3333:
+		/* SGMII on lane A/B/C/D, MAC 9/2/5/6 */
+		fm_info_set_phy_address(FM1_DTSEC9,
+					SGMII_CARD_PORT1_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC2,
+					SGMII_CARD_PORT1_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC5,
+					SGMII_CARD_PORT1_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC6,
+					SGMII_CARD_PORT1_PHY_ADDR);
+		break;
+	default:
+		printf("Invalid SerDes protocol 0x%x for LS1043AQDS\n",
+		       srds_s1);
+		break;
+	}
+
+	for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
+		idx = i - FM1_DTSEC1;
+		interface = fm_info_get_enet_if(i);
+		switch (interface) {
+		case PHY_INTERFACE_MODE_SGMII:
+		case PHY_INTERFACE_MODE_SGMII_2500:
+		case PHY_INTERFACE_MODE_QSGMII:
+			if (interface == PHY_INTERFACE_MODE_SGMII) {
+				lane = serdes_get_first_lane(FSL_SRDS_1,
+						SGMII_FM1_DTSEC1 + idx);
+			} else if (interface == PHY_INTERFACE_MODE_SGMII_2500) {
+				lane = serdes_get_first_lane(FSL_SRDS_1,
+						SGMII_2500_FM1_DTSEC1 + idx);
+			} else {
+				lane = serdes_get_first_lane(FSL_SRDS_1,
+						QSGMII_FM1_A);
+			}
+
+			if (lane < 0)
+				break;
+
+			slot = lane_to_slot[lane];
+			debug("FM1@DTSEC%u expects SGMII in slot %u\n",
+			      idx + 1, slot);
+			if (QIXIS_READ(present2) & (1 << (slot - 1)))
+				fm_disable_port(i);
+
+			switch (slot) {
+			case 1:
+				mdio_mux[i] = EMI1_SLOT1;
+				fm_info_set_mdio(i, mii_dev_for_muxval(
+						 mdio_mux[i]));
+				break;
+			case 2:
+				mdio_mux[i] = EMI1_SLOT2;
+				fm_info_set_mdio(i, mii_dev_for_muxval(
+						 mdio_mux[i]));
+				break;
+			case 3:
+				mdio_mux[i] = EMI1_SLOT3;
+				fm_info_set_mdio(i, mii_dev_for_muxval(
+						 mdio_mux[i]));
+				break;
+			case 4:
+				mdio_mux[i] = EMI1_SLOT4;
+				fm_info_set_mdio(i, mii_dev_for_muxval(
+						 mdio_mux[i]));
+				break;
+			default:
+				break;
+			}
+			break;
+		case PHY_INTERFACE_MODE_RGMII:
+			if (i == FM1_DTSEC3)
+				mdio_mux[i] = EMI1_RGMII1;
+			else if (i == FM1_DTSEC4)
+				mdio_mux[i] = EMI1_RGMII2;
+			fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
+			break;
+		default:
+			break;
+		}
+	}
+
+	cpu_eth_init(bis);
+#endif /* CONFIG_FMAN_ENET */
+
+	return pci_eth_init(bis);
+}
diff --git a/board/freescale/ls1043aqds/ls1043aqds.c b/board/freescale/ls1043aqds/ls1043aqds.c
new file mode 100644
index 0000000..d6696ca
--- /dev/null
+++ b/board/freescale/ls1043aqds/ls1043aqds.c
@@ -0,0 +1,333 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <fdt_support.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/fsl_serdes.h>
+#include <asm/arch/fdt.h>
+#include <asm/arch/soc.h>
+#include <ahci.h>
+#include <hwconfig.h>
+#include <mmc.h>
+#include <scsi.h>
+#include <fm_eth.h>
+#include <fsl_csu.h>
+#include <fsl_esdhc.h>
+#include <fsl_ifc.h>
+#include <spl.h>
+
+#include "../common/qixis.h"
+#include "ls1043aqds_qixis.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+enum {
+	MUX_TYPE_GPIO,
+};
+
+/* LS1043AQDS serdes mux */
+#define CFG_SD_MUX1_SLOT2	0x0 /* SLOT2 TX/RX0 */
+#define CFG_SD_MUX1_SLOT1	0x1 /* SLOT1 TX/RX1 */
+#define CFG_SD_MUX2_SLOT3	0x0 /* SLOT3 TX/RX0 */
+#define CFG_SD_MUX2_SLOT1	0x1 /* SLOT1 TX/RX2 */
+#define CFG_SD_MUX3_SLOT4	0x0 /* SLOT4 TX/RX0 */
+#define CFG_SD_MUX3_MUX4	0x1 /* MUX4 */
+#define CFG_SD_MUX4_SLOT3	0x0 /* SLOT3 TX/RX1 */
+#define CFG_SD_MUX4_SLOT1	0x1 /* SLOT1 TX/RX3 */
+
+int checkboard(void)
+{
+	char buf[64];
+#ifndef CONFIG_SD_BOOT
+	u8 sw;
+#endif
+
+	puts("Board: LS1043AQDS, boot from ");
+
+#ifdef CONFIG_SD_BOOT
+	puts("SD\n");
+#else
+	sw = QIXIS_READ(brdcfg[0]);
+	sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
+
+	if (sw < 0x8)
+		printf("vBank: %d\n", sw);
+	else if (sw == 0x8)
+		puts("PromJet\n");
+	else if (sw == 0x9)
+		puts("NAND\n");
+	else if (sw == 0x15)
+		printf("IFCCard\n");
+	else
+		printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
+#endif
+
+	printf("Sys ID: 0x%02x, Sys Ver: 0x%02x\n",
+	       QIXIS_READ(id), QIXIS_READ(arch));
+
+	printf("FPGA:  v%d (%s), build %d\n",
+	       (int)QIXIS_READ(scver), qixis_read_tag(buf),
+	       (int)qixis_read_minor());
+
+	return 0;
+}
+
+bool if_board_diff_clk(void)
+{
+	u8 diff_conf = QIXIS_READ(brdcfg[11]);
+
+	return diff_conf & 0x40;
+}
+
+unsigned long get_board_sys_clk(void)
+{
+	u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
+
+	switch (sysclk_conf & 0x0f) {
+	case QIXIS_SYSCLK_64:
+		return 64000000;
+	case QIXIS_SYSCLK_83:
+		return 83333333;
+	case QIXIS_SYSCLK_100:
+		return 100000000;
+	case QIXIS_SYSCLK_125:
+		return 125000000;
+	case QIXIS_SYSCLK_133:
+		return 133333333;
+	case QIXIS_SYSCLK_150:
+		return 150000000;
+	case QIXIS_SYSCLK_160:
+		return 160000000;
+	case QIXIS_SYSCLK_166:
+		return 166666666;
+	}
+
+	return 66666666;
+}
+
+unsigned long get_board_ddr_clk(void)
+{
+	u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
+
+	if (if_board_diff_clk())
+		return get_board_sys_clk();
+	switch ((ddrclk_conf & 0x30) >> 4) {
+	case QIXIS_DDRCLK_100:
+		return 100000000;
+	case QIXIS_DDRCLK_125:
+		return 125000000;
+	case QIXIS_DDRCLK_133:
+		return 133333333;
+	}
+
+	return 66666666;
+}
+
+int select_i2c_ch_pca9547(u8 ch)
+{
+	int ret;
+
+	ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+	if (ret) {
+		puts("PCA: failed to select proper channel\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	/*
+	 * When resuming from deep sleep, the I2C channel may not be
+	 * in the default channel. So, switch to the default channel
+	 * before accessing DDR SPD.
+	 */
+	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+	gd->ram_size = initdram(0);
+
+	return 0;
+}
+
+int i2c_multiplexer_select_vid_channel(u8 channel)
+{
+	return select_i2c_ch_pca9547(channel);
+}
+
+void board_retimer_init(void)
+{
+	u8 reg;
+
+	/* Retimer is connected to I2C1_CH7_CH5 */
+	reg = I2C_MUX_CH7;
+	i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &reg, 1);
+	reg = I2C_MUX_CH5;
+	i2c_write(I2C_MUX_PCA_ADDR_SEC, 0, 1, &reg, 1);
+
+	/* Access to Control/Shared register */
+	reg = 0x0;
+	i2c_write(I2C_RETIMER_ADDR, 0xff, 1, &reg, 1);
+
+	/* Read device revision and ID */
+	i2c_read(I2C_RETIMER_ADDR, 1, 1, &reg, 1);
+	debug("Retimer version id = 0x%x\n", reg);
+
+	/* Enable Broadcast. All writes target all channel register sets */
+	reg = 0x0c;
+	i2c_write(I2C_RETIMER_ADDR, 0xff, 1, &reg, 1);
+
+	/* Reset Channel Registers */
+	i2c_read(I2C_RETIMER_ADDR, 0, 1, &reg, 1);
+	reg |= 0x4;
+	i2c_write(I2C_RETIMER_ADDR, 0, 1, &reg, 1);
+
+	/* Enable override divider select and Enable Override Output Mux */
+	i2c_read(I2C_RETIMER_ADDR, 9, 1, &reg, 1);
+	reg |= 0x24;
+	i2c_write(I2C_RETIMER_ADDR, 9, 1, &reg, 1);
+
+	/* Select VCO Divider to full rate (000) */
+	i2c_read(I2C_RETIMER_ADDR, 0x18, 1, &reg, 1);
+	reg &= 0x8f;
+	i2c_write(I2C_RETIMER_ADDR, 0x18, 1, &reg, 1);
+
+	/* Selects active PFD MUX Input as Re-timed Data (001) */
+	i2c_read(I2C_RETIMER_ADDR, 0x1e, 1, &reg, 1);
+	reg &= 0x3f;
+	reg |= 0x20;
+	i2c_write(I2C_RETIMER_ADDR, 0x1e, 1, &reg, 1);
+
+	/* Set data rate as 10.3125 Gbps */
+	reg = 0x0;
+	i2c_write(I2C_RETIMER_ADDR, 0x60, 1, &reg, 1);
+	reg = 0xb2;
+	i2c_write(I2C_RETIMER_ADDR, 0x61, 1, &reg, 1);
+	reg = 0x90;
+	i2c_write(I2C_RETIMER_ADDR, 0x62, 1, &reg, 1);
+	reg = 0xb3;
+	i2c_write(I2C_RETIMER_ADDR, 0x63, 1, &reg, 1);
+	reg = 0xcd;
+	i2c_write(I2C_RETIMER_ADDR, 0x64, 1, &reg, 1);
+}
+
+int board_early_init_f(void)
+{
+	fsl_lsch2_early_init_f();
+
+	return 0;
+}
+
+#ifdef CONFIG_FSL_DEEP_SLEEP
+/* determine if it is a warm boot */
+bool is_warm_boot(void)
+{
+#define DCFG_CCSR_CRSTSR_WDRFR	(1 << 3)
+	struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
+
+	if (in_be32(&gur->crstsr) & DCFG_CCSR_CRSTSR_WDRFR)
+		return 1;
+
+	return 0;
+}
+#endif
+
+int config_board_mux(int ctrl_type)
+{
+	u8 reg14;
+
+	reg14 = QIXIS_READ(brdcfg[14]);
+
+	switch (ctrl_type) {
+	case MUX_TYPE_GPIO:
+		reg14 = (reg14 & (~0x30)) | 0x20;
+		break;
+	default:
+		puts("Unsupported mux interface type\n");
+		return -1;
+	}
+
+	QIXIS_WRITE(brdcfg[14], reg14);
+
+	return 0;
+}
+
+int config_serdes_mux(void)
+{
+	return 0;
+}
+
+
+#ifdef CONFIG_MISC_INIT_R
+int misc_init_r(void)
+{
+	if (hwconfig("gpio"))
+		config_board_mux(MUX_TYPE_GPIO);
+
+	return 0;
+}
+#endif
+
+int board_init(void)
+{
+	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)
+				   CONFIG_SYS_CCI400_ADDR;
+
+	/* Set CCI-400 control override register to enable barrier
+	 * transaction */
+	out_le32(&cci->ctrl_ord,
+		 CCI400_CTRLORD_EN_BARRIER);
+
+	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+	board_retimer_init();
+
+#ifdef CONFIG_SYS_FSL_SERDES
+	config_serdes_mux();
+#endif
+
+#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
+	enable_layerscape_ns_access();
+#endif
+
+#ifdef CONFIG_ENV_IS_NOWHERE
+	gd->env_addr = (ulong)&default_environment[0];
+#endif
+	return 0;
+}
+
+#ifdef CONFIG_OF_BOARD_SETUP
+int ft_board_setup(void *blob, bd_t *bd)
+{
+	ft_cpu_setup(blob, bd);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+	fdt_fixup_fman_ethernet(blob);
+	fdt_fixup_board_enet(blob);
+#endif
+	return 0;
+}
+#endif
+
+u8 flash_read8(void *addr)
+{
+	return __raw_readb(addr + 1);
+}
+
+void flash_write16(u16 val, void *addr)
+{
+	u16 shftval = (((val >> 8) & 0xff) | ((val << 8) & 0xff00));
+
+	__raw_writew(shftval, addr);
+}
+
+u16 flash_read16(void *addr)
+{
+	u16 val = __raw_readw(addr);
+
+	return (((val) >> 8) & 0x00ff) | (((val) << 8) & 0xff00);
+}
diff --git a/board/freescale/ls1043aqds/ls1043aqds_pbi.cfg b/board/freescale/ls1043aqds/ls1043aqds_pbi.cfg
new file mode 100644
index 0000000..f072274
--- /dev/null
+++ b/board/freescale/ls1043aqds/ls1043aqds_pbi.cfg
@@ -0,0 +1,14 @@
+#Configure Scratch register
+09570600 00000000
+09570604 10000000
+#Alt base register
+09570158 00001000
+#Disable CCI barrier tranaction
+09570178 0000e010
+09180000 00000008
+#USB PHY frequency sel
+09570418 0000009e
+0957041c 0000009e
+09570420 0000009e
+#flush PBI data
+096100c0 000fffff
diff --git a/board/freescale/ls1043aqds/ls1043aqds_qixis.h b/board/freescale/ls1043aqds/ls1043aqds_qixis.h
new file mode 100644
index 0000000..8783be8
--- /dev/null
+++ b/board/freescale/ls1043aqds/ls1043aqds_qixis.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __LS1043AQDS_QIXIS_H__
+#define __LS1043AQDS_QIXIS_H__
+
+/* Definitions of QIXIS Registers for LS1043AQDS */
+
+/* BRDCFG4[4:7] select EC1 and EC2 as a pair */
+#define BRDCFG4_EMISEL_MASK		0xe0
+#define BRDCFG4_EMISEL_SHIFT		5
+
+/* SYSCLK */
+#define QIXIS_SYSCLK_66			0x0
+#define QIXIS_SYSCLK_83			0x1
+#define QIXIS_SYSCLK_100		0x2
+#define QIXIS_SYSCLK_125		0x3
+#define QIXIS_SYSCLK_133		0x4
+#define QIXIS_SYSCLK_150		0x5
+#define QIXIS_SYSCLK_160		0x6
+#define QIXIS_SYSCLK_166		0x7
+#define QIXIS_SYSCLK_64			0x8
+
+/* DDRCLK */
+#define QIXIS_DDRCLK_66			0x0
+#define QIXIS_DDRCLK_100		0x1
+#define QIXIS_DDRCLK_125		0x2
+#define QIXIS_DDRCLK_133		0x3
+
+/* BRDCFG2 - SD clock*/
+#define QIXIS_SDCLK1_100		0x0
+#define QIXIS_SDCLK1_125		0x1
+#define QIXIS_SDCLK1_165		0x2
+#define QIXIS_SDCLK1_100_SP		0x3
+
+#endif
diff --git a/board/freescale/ls1043aqds/ls1043aqds_rcw_nand.cfg b/board/freescale/ls1043aqds/ls1043aqds_rcw_nand.cfg
new file mode 100644
index 0000000..935ffc0
--- /dev/null
+++ b/board/freescale/ls1043aqds/ls1043aqds_rcw_nand.cfg
@@ -0,0 +1,7 @@
+#PBL preamble and RCW header
+aa55aa55 01ee0100
+# serdes protocol
+0810000f 0c000000 00000000 00000000
+14550002 80004012 e0106000 61002000
+00000000 00000000 00000000 00038800
+00000000 00001100 00000096 00000001
diff --git a/board/freescale/ls1043aqds/ls1043aqds_rcw_sd_ifc.cfg b/board/freescale/ls1043aqds/ls1043aqds_rcw_sd_ifc.cfg
new file mode 100644
index 0000000..17a5dd0
--- /dev/null
+++ b/board/freescale/ls1043aqds/ls1043aqds_rcw_sd_ifc.cfg
@@ -0,0 +1,8 @@
+#PBL preamble and RCW header
+aa55aa55 01ee0100
+# RCW
+# Enable IFC; disable QSPI
+0810000f 0c000000 00000000 00000000
+14550002 80004012 60040000 61002000
+00000000 00000000 00000000 00038800
+00000000 00001100 00000096 00000001
diff --git a/board/freescale/ls1043ardb/ls1043ardb.c b/board/freescale/ls1043ardb/ls1043ardb.c
index 9032ed3..cdd50d6 100644
--- a/board/freescale/ls1043ardb/ls1043ardb.c
+++ b/board/freescale/ls1043ardb/ls1043ardb.c
@@ -69,7 +69,23 @@ int dram_init(void)
 
 int board_early_init_f(void)
 {
+	struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
+	u32 usb_pwrfault;
+
 	fsl_lsch2_early_init_f();
+
+#ifdef CONFIG_HAS_FSL_XHCI_USB
+	out_be32(&scfg->rcwpmuxcr0, 0x3333);
+	out_be32(&scfg->usbdrvvbus_selcr, SCFG_USBDRVVBUS_SELCR_USB1);
+	usb_pwrfault = (SCFG_USBPWRFAULT_DEDICATED <<
+			SCFG_USBPWRFAULT_USB3_SHIFT) |
+			(SCFG_USBPWRFAULT_DEDICATED <<
+			SCFG_USBPWRFAULT_USB2_SHIFT) |
+			(SCFG_USBPWRFAULT_SHARED <<
+			 SCFG_USBPWRFAULT_USB1_SHIFT);
+	out_be32(&scfg->usbpwrfault_selcr, usb_pwrfault);
+#endif
+
 	return 0;
 }
 
diff --git a/board/freescale/ls2085a/Kconfig b/board/freescale/ls2080a/Kconfig
index 042f85b..0b938ff 100644
--- a/board/freescale/ls2085a/Kconfig
+++ b/board/freescale/ls2080a/Kconfig
@@ -1,7 +1,7 @@
-if TARGET_LS2085A_EMU
+if TARGET_LS2080A_EMU
 
 config SYS_BOARD
-	default "ls2085a"
+	default "ls2080a"
 
 config SYS_VENDOR
 	default "freescale"
@@ -10,14 +10,14 @@ config SYS_SOC
 	default "fsl-layerscape"
 
 config SYS_CONFIG_NAME
-	default "ls2085a_emu"
+	default "ls2080a_emu"
 
 endif
 
-if TARGET_LS2085A_SIMU
+if TARGET_LS2080A_SIMU
 
 config SYS_BOARD
-	default "ls2085a"
+	default "ls2080a"
 
 config SYS_VENDOR
 	default "freescale"
@@ -26,6 +26,6 @@ config SYS_SOC
 	default "fsl-layerscape"
 
 config SYS_CONFIG_NAME
-	default "ls2085a_simu"
+	default "ls2080a_simu"
 
 endif
diff --git a/board/freescale/ls2080a/MAINTAINERS b/board/freescale/ls2080a/MAINTAINERS
new file mode 100644
index 0000000..03ca168
--- /dev/null
+++ b/board/freescale/ls2080a/MAINTAINERS
@@ -0,0 +1,10 @@
+LS2080A BOARD
+M:	York Sun <yorksun@freescale.com>
+S:	Maintained
+F:	board/freescale/ls2080a/
+F:	include/configs/ls2080a_emu.h
+F:	configs/ls2080a_emu_defconfig
+F:	include/configs/ls2080a_simu.h
+F:	configs/ls2080a_simu_defconfig
+F:	configs/ls2085a_emu_defconfig
+F:	configs/ls2085a_simu_defconfig
diff --git a/board/freescale/ls2080a/Makefile b/board/freescale/ls2080a/Makefile
new file mode 100644
index 0000000..47c7c74
--- /dev/null
+++ b/board/freescale/ls2080a/Makefile
@@ -0,0 +1,8 @@
+#
+# Copyright 2014-15 Freescale Semiconductor
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y += ls2080a.o
+obj-y += ddr.o
diff --git a/board/freescale/ls2085a/README b/board/freescale/ls2080a/README
index bc1d0bb..7e53f1f 100644
--- a/board/freescale/ls2085a/README
+++ b/board/freescale/ls2080a/README
@@ -1,4 +1,4 @@
-Freescale ls2085a_emu
+Freescale ls2080a_emu
 
 This is a emulator target with limited peripherals.
 
diff --git a/board/freescale/ls2085a/ddr.c b/board/freescale/ls2080a/ddr.c
index 4884fa2..47d73ef 100644
--- a/board/freescale/ls2085a/ddr.c
+++ b/board/freescale/ls2080a/ddr.c
@@ -71,7 +71,7 @@ found:
 		pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb,
 		pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2,
 		pbsp->wrlvl_ctl_3);
-
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
 	if (ctrl_num == CONFIG_DP_DDR_CTRL) {
 		/* force DDR bus width to 32 bits */
 		popts->data_bus_width = 1;
@@ -79,6 +79,7 @@ found:
 		popts->burst_length = DDR_BL8;
 		popts->bstopre = 0;	/* enable auto precharge */
 	}
+#endif
 	/*
 	 * Factors to consider for half-strength driver enable:
 	 *	- number of DIMMs installed
diff --git a/board/freescale/ls2085a/ddr.h b/board/freescale/ls2080a/ddr.h
index 9958a68..9958a68 100644
--- a/board/freescale/ls2085a/ddr.h
+++ b/board/freescale/ls2080a/ddr.h
diff --git a/board/freescale/ls2085a/ls2085a.c b/board/freescale/ls2080a/ls2080a.c
index 27481e2..827fbf0 100644
--- a/board/freescale/ls2085a/ls2085a.c
+++ b/board/freescale/ls2080a/ls2080a.c
@@ -41,11 +41,13 @@ void detail_board_ddr_info(void)
 	puts("\nDDR    ");
 	print_size(gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size, "");
 	print_ddr_info(0);
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
 	if (gd->bd->bi_dram[2].size) {
 		puts("\nDP-DDR ");
 		print_size(gd->bd->bi_dram[2].size, "");
 		print_ddr_info(CONFIG_DP_DDR_CTRL);
 	}
+#endif
 }
 
 int dram_init(void)
diff --git a/board/freescale/ls2085ardb/Kconfig b/board/freescale/ls2080aqds/Kconfig
index cb40db9..2f997e9 100644
--- a/board/freescale/ls2085ardb/Kconfig
+++ b/board/freescale/ls2080aqds/Kconfig
@@ -1,8 +1,8 @@
 
-if TARGET_LS2085ARDB
+if TARGET_LS2080AQDS
 
 config SYS_BOARD
-	default "ls2085ardb"
+	default "ls2080aqds"
 
 config SYS_VENDOR
 	default "freescale"
@@ -11,6 +11,6 @@ config SYS_SOC
 	default "fsl-layerscape"
 
 config SYS_CONFIG_NAME
-	default "ls2085ardb"
+	default "ls2080aqds"
 
 endif
diff --git a/board/freescale/ls2080aqds/MAINTAINERS b/board/freescale/ls2080aqds/MAINTAINERS
new file mode 100644
index 0000000..6f99ad0
--- /dev/null
+++ b/board/freescale/ls2080aqds/MAINTAINERS
@@ -0,0 +1,10 @@
+LS2080A BOARD
+M:	Prabhakar Kushwaha <prabhakar@freescale.com>
+S:	Maintained
+F:	board/freescale/ls2080aqds/
+F:	board/freescale/ls2080a/ls2080aqds.c
+F:	include/configs/ls2080aqds.h
+F:	configs/ls2080aqds_defconfig
+F:	configs/ls2080aqds_nand_defconfig
+F:	configs/ls2085aqds_defconfig
+F:	configs/ls2085aqds_nand_defconfig
diff --git a/board/freescale/ls2085aqds/Makefile b/board/freescale/ls2080aqds/Makefile
index da69a7d..e0da8a5 100644
--- a/board/freescale/ls2085aqds/Makefile
+++ b/board/freescale/ls2080aqds/Makefile
@@ -4,6 +4,6 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-obj-y += ls2085aqds.o
+obj-y += ls2080aqds.o
 obj-y += ddr.o
 obj-y += eth.o
diff --git a/board/freescale/ls2085aqds/README b/board/freescale/ls2080aqds/README
index e4a6f69..375e97c 100644
--- a/board/freescale/ls2085aqds/README
+++ b/board/freescale/ls2080aqds/README
@@ -1,19 +1,19 @@
 Overview
 --------
-The LS2085A Development System (QDS) is a high-performance computing,
-evaluation, and development platform that supports the QorIQ LS2085A
-Layerscape Architecture processor. The LS2085AQDS provides validation and
-SW development platform for the Freescale LS2085A processor series, with
+The LS2080A Development System (QDS) is a high-performance computing,
+evaluation, and development platform that supports the QorIQ LS2080A
+Layerscape Architecture processor. The LS2080AQDS provides validation and
+SW development platform for the Freescale LS2080A processor series, with
 a complete debugging environment.
 
-LS2085A SoC Overview
+LS2080A SoC Overview
 ------------------
-The LS2085A integrated multicore processor combines eight ARM Cortex-A57
+The LS2080A integrated multicore processor combines eight ARM Cortex-A57
 processor cores with high-performance data path acceleration logic and network
 and peripheral bus interfaces required for networking, telecom/datacom,
 wireless infrastructure, and mil/aerospace applications.
 
-The LS2085A SoC includes the following function and features:
+The LS2080A SoC includes the following function and features:
 
  - Eight 64-bit ARM Cortex-A57 CPUs
  - 1 MB platform cache with ECC
@@ -50,7 +50,7 @@ The LS2085A SoC includes the following function and features:
  - Service processor (SP) provides pre-boot initialization and secure-boot
   capabilities
 
- LS2085AQDS board Overview
+ LS2080AQDS board Overview
  -----------------------
  - SERDES Connections, 16 lanes supporting:
       - PCI Express - 3.0
@@ -172,7 +172,7 @@ Supported PHY addresses during SGMII:
 #define XQSGMII_CARD_PHY4_PORT0_ADDR 0xc
 #define XQSGMII_CARD_PHY4_PORT2_ADDR 0xe
 
-Mapping DPMACx to PHY during QSGMII
+Mapping DPMACx to PHY during SGMII
 DPMAC1 -> PHY1-P0
 DPMAC2 -> PHY2-P0
 DPMAC3 -> PHY3-P0
diff --git a/board/freescale/ls2085ardb/ddr.c b/board/freescale/ls2080aqds/ddr.c
index 8d71ae1..ae681de 100644
--- a/board/freescale/ls2085ardb/ddr.c
+++ b/board/freescale/ls2080aqds/ddr.c
@@ -15,7 +15,9 @@ void fsl_ddr_board_options(memctl_options_t *popts,
 				dimm_params_t *pdimm,
 				unsigned int ctrl_num)
 {
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
 	u8 dq_mapping_0, dq_mapping_2, dq_mapping_3;
+#endif
 	const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
 	ulong ddr_freq;
 	int slot;
@@ -79,7 +81,7 @@ found:
 		pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb,
 		pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2,
 		pbsp->wrlvl_ctl_3);
-
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
 	if (ctrl_num == CONFIG_DP_DDR_CTRL) {
 		/* force DDR bus width to 32 bits */
 		popts->data_bus_width = 1;
@@ -114,6 +116,7 @@ found:
 		pdimm[slot].dq_mapping[16] = 0;
 		pdimm[slot].dq_mapping[17] = 0;
 	}
+#endif
 	/* To work at higher than 1333MT/s */
 	popts->half_strength_driver_enable = 0;
 	/*
diff --git a/board/freescale/ls2085aqds/ddr.h b/board/freescale/ls2080aqds/ddr.h
index b76ea61..b76ea61 100644
--- a/board/freescale/ls2085aqds/ddr.h
+++ b/board/freescale/ls2080aqds/ddr.h
diff --git a/board/freescale/ls2085aqds/eth.c b/board/freescale/ls2080aqds/eth.c
index b8a2bf4..0637ecf 100644
--- a/board/freescale/ls2085aqds/eth.c
+++ b/board/freescale/ls2080aqds/eth.c
@@ -18,16 +18,16 @@
 
 #include "../common/qixis.h"
 
-#include "ls2085aqds_qixis.h"
+#include "ls2080aqds_qixis.h"
 
 
 #ifdef CONFIG_FSL_MC_ENET
- /* - In LS2085A there are only 16 SERDES lanes, spread across 2 SERDES banks.
+ /* - In LS2080A there are only 16 SERDES lanes, spread across 2 SERDES banks.
  *   Bank 1 -> Lanes A, B, C, D, E, F, G, H
  *   Bank 2 -> Lanes A,B, C, D, E, F, G, H
  */
 
- /* Mapping of 16 SERDES lanes to LS2085A QDS board slots. A value of '0' here
+ /* Mapping of 16 SERDES lanes to LS2080A QDS board slots. A value of '0' here
   * means that the mapping must be determined dynamically, or that the lane
   * maps to something other than a board slot.
   */
@@ -74,16 +74,16 @@ static int sgmii_riser_phy_addr[] = {
 #define SFP_TX		0
 
 static const char * const mdio_names[] = {
-	"LS2085A_QDS_MDIO0",
-	"LS2085A_QDS_MDIO1",
-	"LS2085A_QDS_MDIO2",
-	"LS2085A_QDS_MDIO3",
-	"LS2085A_QDS_MDIO4",
-	"LS2085A_QDS_MDIO5",
+	"LS2080A_QDS_MDIO0",
+	"LS2080A_QDS_MDIO1",
+	"LS2080A_QDS_MDIO2",
+	"LS2080A_QDS_MDIO3",
+	"LS2080A_QDS_MDIO4",
+	"LS2080A_QDS_MDIO5",
 	DEFAULT_WRIOP_MDIO2_NAME,
 };
 
-struct ls2085a_qds_mdio {
+struct ls2080a_qds_mdio {
 	u8 muxval;
 	struct mii_dev *realbus;
 };
@@ -95,7 +95,7 @@ static void sgmii_configure_repeater(int serdes_port)
 	int i, j, ret;
 	int dpmac_id = 0, dpmac, mii_bus = 0;
 	unsigned short value;
-	char dev[2][20] = {"LS2085A_QDS_MDIO0", "LS2085A_QDS_MDIO3"};
+	char dev[2][20] = {"LS2080A_QDS_MDIO0", "LS2080A_QDS_MDIO3"};
 	uint8_t i2c_addr[] = {0x58, 0x59, 0x5a, 0x5b, 0x5c, 0x5d, 0x5f, 0x60};
 
 	uint8_t ch_a_eq[] = {0x1, 0x2, 0x3, 0x7};
@@ -222,7 +222,7 @@ static void qsgmii_configure_repeater(int dpmac)
 	uint8_t ch_b_eq[] = {0x1, 0x2, 0x3, 0x7};
 	uint8_t ch_b_ctl2[] = {0x81, 0x82, 0x83, 0x84};
 
-	const char *dev = "LS2085A_QDS_MDIO0";
+	const char *dev = "LS2080A_QDS_MDIO0";
 	int ret = 0;
 	unsigned short value;
 
@@ -318,7 +318,7 @@ error:
 	return;
 }
 
-static const char *ls2085a_qds_mdio_name_for_muxval(u8 muxval)
+static const char *ls2080a_qds_mdio_name_for_muxval(u8 muxval)
 {
 	return mdio_names[muxval];
 }
@@ -326,7 +326,7 @@ static const char *ls2085a_qds_mdio_name_for_muxval(u8 muxval)
 struct mii_dev *mii_dev_for_muxval(u8 muxval)
 {
 	struct mii_dev *bus;
-	const char *name = ls2085a_qds_mdio_name_for_muxval(muxval);
+	const char *name = ls2080a_qds_mdio_name_for_muxval(muxval);
 
 	if (!name) {
 		printf("No bus for muxval %x\n", muxval);
@@ -343,7 +343,7 @@ struct mii_dev *mii_dev_for_muxval(u8 muxval)
 	return bus;
 }
 
-static void ls2085a_qds_enable_SFP_TX(u8 muxval)
+static void ls2080a_qds_enable_SFP_TX(u8 muxval)
 {
 	u8 brdcfg9;
 
@@ -353,7 +353,7 @@ static void ls2085a_qds_enable_SFP_TX(u8 muxval)
 	QIXIS_WRITE(brdcfg[9], brdcfg9);
 }
 
-static void ls2085a_qds_mux_mdio(u8 muxval)
+static void ls2080a_qds_mux_mdio(u8 muxval)
 {
 	u8 brdcfg4;
 
@@ -365,54 +365,54 @@ static void ls2085a_qds_mux_mdio(u8 muxval)
 	}
 }
 
-static int ls2085a_qds_mdio_read(struct mii_dev *bus, int addr,
+static int ls2080a_qds_mdio_read(struct mii_dev *bus, int addr,
 				 int devad, int regnum)
 {
-	struct ls2085a_qds_mdio *priv = bus->priv;
+	struct ls2080a_qds_mdio *priv = bus->priv;
 
-	ls2085a_qds_mux_mdio(priv->muxval);
+	ls2080a_qds_mux_mdio(priv->muxval);
 
 	return priv->realbus->read(priv->realbus, addr, devad, regnum);
 }
 
-static int ls2085a_qds_mdio_write(struct mii_dev *bus, int addr, int devad,
+static int ls2080a_qds_mdio_write(struct mii_dev *bus, int addr, int devad,
 				  int regnum, u16 value)
 {
-	struct ls2085a_qds_mdio *priv = bus->priv;
+	struct ls2080a_qds_mdio *priv = bus->priv;
 
-	ls2085a_qds_mux_mdio(priv->muxval);
+	ls2080a_qds_mux_mdio(priv->muxval);
 
 	return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
 }
 
-static int ls2085a_qds_mdio_reset(struct mii_dev *bus)
+static int ls2080a_qds_mdio_reset(struct mii_dev *bus)
 {
-	struct ls2085a_qds_mdio *priv = bus->priv;
+	struct ls2080a_qds_mdio *priv = bus->priv;
 
 	return priv->realbus->reset(priv->realbus);
 }
 
-static int ls2085a_qds_mdio_init(char *realbusname, u8 muxval)
+static int ls2080a_qds_mdio_init(char *realbusname, u8 muxval)
 {
-	struct ls2085a_qds_mdio *pmdio;
+	struct ls2080a_qds_mdio *pmdio;
 	struct mii_dev *bus = mdio_alloc();
 
 	if (!bus) {
-		printf("Failed to allocate ls2085a_qds MDIO bus\n");
+		printf("Failed to allocate ls2080a_qds MDIO bus\n");
 		return -1;
 	}
 
 	pmdio = malloc(sizeof(*pmdio));
 	if (!pmdio) {
-		printf("Failed to allocate ls2085a_qds private data\n");
+		printf("Failed to allocate ls2080a_qds private data\n");
 		free(bus);
 		return -1;
 	}
 
-	bus->read = ls2085a_qds_mdio_read;
-	bus->write = ls2085a_qds_mdio_write;
-	bus->reset = ls2085a_qds_mdio_reset;
-	sprintf(bus->name, ls2085a_qds_mdio_name_for_muxval(muxval));
+	bus->read = ls2080a_qds_mdio_read;
+	bus->write = ls2080a_qds_mdio_write;
+	bus->reset = ls2080a_qds_mdio_reset;
+	sprintf(bus->name, ls2080a_qds_mdio_name_for_muxval(muxval));
 
 	pmdio->realbus = miiphy_get_dev_by_name(realbusname);
 
@@ -474,8 +474,8 @@ static void initialize_dpmac_to_slot(void)
 		       serdes1_prtcl);
 		break;
 	default:
-		printf("qds: WRIOP: Unsupported SerDes1 Protocol 0x%02x\n",
-		       serdes1_prtcl);
+		printf("%s qds: WRIOP: Unsupported SerDes1 Protocol 0x%02x\n",
+		       __func__, serdes1_prtcl);
 		break;
 	}
 
@@ -505,13 +505,13 @@ static void initialize_dpmac_to_slot(void)
 		}
 		break;
 	default:
-		printf("qds: WRIOP: Unsupported SerDes2 Protocol 0x%02x\n",
-		       serdes2_prtcl);
+		printf(" %s qds: WRIOP: Unsupported SerDes2 Protocol 0x%02x\n",
+		       __func__ , serdes2_prtcl);
 		break;
 	}
 }
 
-void ls2085a_handle_phy_interface_sgmii(int dpmac_id)
+void ls2080a_handle_phy_interface_sgmii(int dpmac_id)
 {
 	int lane, slot;
 	struct mii_dev *bus;
@@ -580,8 +580,8 @@ void ls2085a_handle_phy_interface_sgmii(int dpmac_id)
 		}
 	break;
 	default:
-		printf("qds: WRIOP: Unsupported SerDes1 Protocol 0x%02x\n",
-		       serdes1_prtcl);
+		printf("%s qds: WRIOP: Unsupported SerDes1 Protocol 0x%02x\n",
+		       __func__ , serdes1_prtcl);
 	break;
 	}
 
@@ -626,13 +626,13 @@ serdes2:
 	}
 	break;
 	default:
-		printf("qds: WRIOP: Unsupported SerDes2 Protocol 0x%02x\n",
-		       serdes2_prtcl);
+		printf("%s qds: WRIOP: Unsupported SerDes2 Protocol 0x%02x\n",
+		       __func__, serdes2_prtcl);
 	break;
 	}
 }
 
-void ls2085a_handle_phy_interface_qsgmii(int dpmac_id)
+void ls2080a_handle_phy_interface_qsgmii(int dpmac_id)
 {
 	int lane = 0, slot;
 	struct mii_dev *bus;
@@ -706,7 +706,7 @@ void ls2085a_handle_phy_interface_qsgmii(int dpmac_id)
 	qsgmii_configure_repeater(dpmac_id);
 }
 
-void ls2085a_handle_phy_interface_xsgmii(int i)
+void ls2080a_handle_phy_interface_xsgmii(int i)
 {
 	struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
 	int serdes1_prtcl = (in_le32(&gur->rcwsr[28]) &
@@ -725,7 +725,7 @@ void ls2085a_handle_phy_interface_xsgmii(int i)
 		 * error.
 		 */
 		wriop_set_phy_address(i, i + 4);
-		ls2085a_qds_enable_SFP_TX(SFP_TX);
+		ls2080a_qds_enable_SFP_TX(SFP_TX);
 
 		break;
 	default:
@@ -778,25 +778,25 @@ int board_eth_init(bd_t *bis)
 	fm_memac_mdio_init(bis, memac_mdio1_info);
 
 	/* Register the muxing front-ends to the MDIO buses */
-	ls2085a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT1);
-	ls2085a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT2);
-	ls2085a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT3);
-	ls2085a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT4);
-	ls2085a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT5);
-	ls2085a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT6);
+	ls2080a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT1);
+	ls2080a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT2);
+	ls2080a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT3);
+	ls2080a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT4);
+	ls2080a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT5);
+	ls2080a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT6);
 
-	ls2085a_qds_mdio_init(DEFAULT_WRIOP_MDIO2_NAME, EMI2);
+	ls2080a_qds_mdio_init(DEFAULT_WRIOP_MDIO2_NAME, EMI2);
 
 	for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++) {
 		switch (wriop_get_enet_if(i)) {
 		case PHY_INTERFACE_MODE_QSGMII:
-			ls2085a_handle_phy_interface_qsgmii(i);
+			ls2080a_handle_phy_interface_qsgmii(i);
 			break;
 		case PHY_INTERFACE_MODE_SGMII:
-			ls2085a_handle_phy_interface_sgmii(i);
+			ls2080a_handle_phy_interface_sgmii(i);
 			break;
 		case PHY_INTERFACE_MODE_XGMII:
-			ls2085a_handle_phy_interface_xsgmii(i);
+			ls2080a_handle_phy_interface_xsgmii(i);
 			break;
 		default:
 			break;
diff --git a/board/freescale/ls2085aqds/ls2085aqds.c b/board/freescale/ls2080aqds/ls2080aqds.c
index b02d6e8..1f99072 100644
--- a/board/freescale/ls2085aqds/ls2085aqds.c
+++ b/board/freescale/ls2080aqds/ls2080aqds.c
@@ -21,7 +21,7 @@
 #include <hwconfig.h>
 
 #include "../common/qixis.h"
-#include "ls2085aqds_qixis.h"
+#include "ls2080aqds_qixis.h"
 
 #define PIN_MUX_SEL_SDHC	0x00
 #define PIN_MUX_SEL_DSPI	0x0a
@@ -226,11 +226,13 @@ void detail_board_ddr_info(void)
 	puts("\nDDR    ");
 	print_size(gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size, "");
 	print_ddr_info(0);
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
 	if (gd->bd->bi_dram[2].size) {
 		puts("\nDP-DDR ");
 		print_size(gd->bd->bi_dram[2].size, "");
 		print_ddr_info(CONFIG_DP_DDR_CTRL);
 	}
+#endif
 }
 
 int dram_init(void)
@@ -294,6 +296,7 @@ void fdt_fixup_board_enet(void *fdt)
 #ifdef CONFIG_OF_BOARD_SETUP
 int ft_board_setup(void *blob, bd_t *bd)
 {
+	int err;
 	u64 base[CONFIG_NR_DRAM_BANKS];
 	u64 size[CONFIG_NR_DRAM_BANKS];
 
@@ -309,7 +312,9 @@ int ft_board_setup(void *blob, bd_t *bd)
 
 #ifdef CONFIG_FSL_MC_ENET
 	fdt_fixup_board_enet(blob);
-	fsl_mc_ldpaa_exit(bd);
+	err = fsl_mc_ldpaa_exit(bd);
+	if (err)
+		return err;
 #endif
 
 	return 0;
diff --git a/board/freescale/ls2085aqds/ls2085aqds_qixis.h b/board/freescale/ls2080aqds/ls2080aqds_qixis.h
index e281e5f..e281e5f 100644
--- a/board/freescale/ls2085aqds/ls2085aqds_qixis.h
+++ b/board/freescale/ls2080aqds/ls2080aqds_qixis.h
diff --git a/board/freescale/ls2085aqds/Kconfig b/board/freescale/ls2080ardb/Kconfig
index 8d6acba..fe02575 100644
--- a/board/freescale/ls2085aqds/Kconfig
+++ b/board/freescale/ls2080ardb/Kconfig
@@ -1,8 +1,8 @@
 
-if TARGET_LS2085AQDS
+if TARGET_LS2080ARDB
 
 config SYS_BOARD
-	default "ls2085aqds"
+	default "ls2080ardb"
 
 config SYS_VENDOR
 	default "freescale"
@@ -11,6 +11,6 @@ config SYS_SOC
 	default "fsl-layerscape"
 
 config SYS_CONFIG_NAME
-	default "ls2085aqds"
+	default "ls2080ardb"
 
 endif
diff --git a/board/freescale/ls2080ardb/MAINTAINERS b/board/freescale/ls2080ardb/MAINTAINERS
new file mode 100644
index 0000000..c9f3459
--- /dev/null
+++ b/board/freescale/ls2080ardb/MAINTAINERS
@@ -0,0 +1,10 @@
+LS2080A BOARD
+M:	Prabhakar Kushwaha <prabhakar@freescale.com>
+S:	Maintained
+F:	board/freescale/ls2080ardb/
+F:	board/freescale/ls2080a/ls2080ardb.c
+F:	include/configs/ls2080ardb.h
+F:	configs/ls2080ardb_defconfig
+F:	configs/ls2080ardb_nand_defconfig
+F:	configs/ls2085ardb_defconfig
+F:	configs/ls2085ardb_nand_defconfig
diff --git a/board/freescale/ls2085ardb/Makefile b/board/freescale/ls2080ardb/Makefile
index de383cc..6a52167 100644
--- a/board/freescale/ls2085ardb/Makefile
+++ b/board/freescale/ls2080ardb/Makefile
@@ -4,5 +4,5 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-obj-y += ls2085ardb.o eth_ls2085rdb.o
+obj-y += ls2080ardb.o eth_ls2080rdb.o
 obj-y += ddr.o
diff --git a/board/freescale/ls2085ardb/README b/board/freescale/ls2080ardb/README
index 2f18243..7fc2569 100644
--- a/board/freescale/ls2085ardb/README
+++ b/board/freescale/ls2080ardb/README
@@ -1,17 +1,17 @@
 Overview
 --------
-The LS2085A Reference Design (RDB) is a high-performance computing,
-evaluation, and development platform that supports the QorIQ LS2085A
+The LS2080A Reference Design (RDB) is a high-performance computing,
+evaluation, and development platform that supports the QorIQ LS2080A
 Layerscape Architecture processor.
 
-LS2085A SoC Overview
+LS2080A SoC Overview
 ------------------
-The LS2085A integrated multicore processor combines eight ARM Cortex-A57
+The LS2080A integrated multicore processor combines eight ARM Cortex-A57
 processor cores with high-performance data path acceleration logic and network
 and peripheral bus interfaces required for networking, telecom/datacom,
 wireless infrastructure, and mil/aerospace applications.
 
-The LS2085A SoC includes the following function and features:
+The LS2080A SoC includes the following function and features:
 
  - Eight 64-bit ARM Cortex-A57 CPUs
  - 1 MB platform cache with ECC
@@ -48,7 +48,7 @@ The LS2085A SoC includes the following function and features:
  - Service processor (SP) provides pre-boot initialization and secure-boot
   capabilities
 
- LS2085ARDB board Overview
+ LS2080ARDB board Overview
  -----------------------
  - SERDES Connections, 16 lanes supporting:
       - PCI Express - 3.0
diff --git a/board/freescale/ls2085aqds/ddr.c b/board/freescale/ls2080ardb/ddr.c
index 8d71ae1..ae681de 100644
--- a/board/freescale/ls2085aqds/ddr.c
+++ b/board/freescale/ls2080ardb/ddr.c
@@ -15,7 +15,9 @@ void fsl_ddr_board_options(memctl_options_t *popts,
 				dimm_params_t *pdimm,
 				unsigned int ctrl_num)
 {
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
 	u8 dq_mapping_0, dq_mapping_2, dq_mapping_3;
+#endif
 	const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
 	ulong ddr_freq;
 	int slot;
@@ -79,7 +81,7 @@ found:
 		pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb,
 		pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2,
 		pbsp->wrlvl_ctl_3);
-
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
 	if (ctrl_num == CONFIG_DP_DDR_CTRL) {
 		/* force DDR bus width to 32 bits */
 		popts->data_bus_width = 1;
@@ -114,6 +116,7 @@ found:
 		pdimm[slot].dq_mapping[16] = 0;
 		pdimm[slot].dq_mapping[17] = 0;
 	}
+#endif
 	/* To work at higher than 1333MT/s */
 	popts->half_strength_driver_enable = 0;
 	/*
diff --git a/board/freescale/ls2085ardb/ddr.h b/board/freescale/ls2080ardb/ddr.h
index bda9d4a..bda9d4a 100644
--- a/board/freescale/ls2085ardb/ddr.h
+++ b/board/freescale/ls2080ardb/ddr.h
diff --git a/board/freescale/ls2085ardb/eth_ls2085rdb.c b/board/freescale/ls2080ardb/eth_ls2080rdb.c
index d578757..db50e4e 100644
--- a/board/freescale/ls2085ardb/eth_ls2085rdb.c
+++ b/board/freescale/ls2080ardb/eth_ls2080rdb.c
@@ -97,7 +97,7 @@ int board_eth_init(bd_t *bis)
 
 		break;
 	default:
-		printf("SerDes1 protocol 0x%x is not supported on LS2085aRDB\n",
+		printf("SerDes1 protocol 0x%x is not supported on LS2080aRDB\n",
 		       srds_s1);
 		break;
 	}
diff --git a/board/freescale/ls2085ardb/ls2085ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c
index 18953b8..2ae9d6c 100644
--- a/board/freescale/ls2085ardb/ls2085ardb.c
+++ b/board/freescale/ls2080ardb/ls2080ardb.c
@@ -20,7 +20,7 @@
 #include <asm/arch/soc.h>
 
 #include "../common/qixis.h"
-#include "ls2085ardb_qixis.h"
+#include "ls2080ardb_qixis.h"
 
 #define PIN_MUX_SEL_SDHC	0x00
 #define PIN_MUX_SEL_DSPI	0x0a
@@ -192,11 +192,13 @@ void detail_board_ddr_info(void)
 	puts("\nDDR    ");
 	print_size(gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size, "");
 	print_ddr_info(0);
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
 	if (gd->bd->bi_dram[2].size) {
 		puts("\nDP-DDR ");
 		print_size(gd->bd->bi_dram[2].size, "");
 		print_ddr_info(CONFIG_DP_DDR_CTRL);
 	}
+#endif
 }
 
 int dram_init(void)
@@ -260,6 +262,7 @@ void fdt_fixup_board_enet(void *fdt)
 #ifdef CONFIG_OF_BOARD_SETUP
 int ft_board_setup(void *blob, bd_t *bd)
 {
+	int err;
 	u64 base[CONFIG_NR_DRAM_BANKS];
 	u64 size[CONFIG_NR_DRAM_BANKS];
 
@@ -275,7 +278,9 @@ int ft_board_setup(void *blob, bd_t *bd)
 
 #ifdef CONFIG_FSL_MC_ENET
 	fdt_fixup_board_enet(blob);
-	fsl_mc_ldpaa_exit(bd);
+	err = fsl_mc_ldpaa_exit(bd);
+	if (err)
+		return err;
 #endif
 
 	return 0;
diff --git a/board/freescale/ls2085ardb/ls2085ardb_qixis.h b/board/freescale/ls2080ardb/ls2080ardb_qixis.h
index cb60c00..cb60c00 100644
--- a/board/freescale/ls2085ardb/ls2085ardb_qixis.h
+++ b/board/freescale/ls2080ardb/ls2080ardb_qixis.h
diff --git a/board/freescale/ls2085a/MAINTAINERS b/board/freescale/ls2085a/MAINTAINERS
deleted file mode 100644
index 90b4e47..0000000
--- a/board/freescale/ls2085a/MAINTAINERS
+++ /dev/null
@@ -1,8 +0,0 @@
-LS2085A BOARD
-M:	York Sun <yorksun@freescale.com>
-S:	Maintained
-F:	board/freescale/ls2085a/
-F:	include/configs/ls2085a_emu.h
-F:	configs/ls2085a_emu_defconfig
-F:	include/configs/ls2085a_simu.h
-F:	configs/ls2085a_simu_defconfig
diff --git a/board/freescale/ls2085a/Makefile b/board/freescale/ls2085a/Makefile
deleted file mode 100644
index 701b35c..0000000
--- a/board/freescale/ls2085a/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Copyright 2014 Freescale Semiconductor
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y += ls2085a.o
-obj-y += ddr.o
diff --git a/board/freescale/ls2085aqds/MAINTAINERS b/board/freescale/ls2085aqds/MAINTAINERS
deleted file mode 100644
index fbed672..0000000
--- a/board/freescale/ls2085aqds/MAINTAINERS
+++ /dev/null
@@ -1,8 +0,0 @@
-LS2085A BOARD
-M:	Prabhakar Kushwaha <prabhakar@freescale.com>
-S:	Maintained
-F:	board/freescale/ls2085aqds/
-F:	board/freescale/ls2085a/ls2085aqds.c
-F:	include/configs/ls2085aqds.h
-F:	configs/ls2085aqds_defconfig
-F:	configs/ls2085aqds_nand_defconfig
diff --git a/board/freescale/ls2085ardb/MAINTAINERS b/board/freescale/ls2085ardb/MAINTAINERS
deleted file mode 100644
index d5cce40..0000000
--- a/board/freescale/ls2085ardb/MAINTAINERS
+++ /dev/null
@@ -1,8 +0,0 @@
-LS2085A BOARD
-M:	Prabhakar Kushwaha <prabhakar@freescale.com>
-S:	Maintained
-F:	board/freescale/ls2085ardb/
-F:	board/freescale/ls2085a/ls2085ardb.c
-F:	include/configs/ls2085ardb.h
-F:	configs/ls2085ardb_defconfig
-F:	configs/ls2085ardb_nand_defconfig
diff --git a/configs/ls1043aqds_defconfig b/configs/ls1043aqds_defconfig
new file mode 100644
index 0000000..60fb0ad
--- /dev/null
+++ b/configs/ls1043aqds_defconfig
@@ -0,0 +1,6 @@
+CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4"
+CONFIG_ARM=y
+CONFIG_TARGET_LS1043AQDS=y
+CONFIG_SYS_NS16550=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds"
+CONFIG_OF_CONTROL=y
diff --git a/configs/ls1043aqds_nand_defconfig b/configs/ls1043aqds_nand_defconfig
new file mode 100644
index 0000000..e9d5afd
--- /dev/null
+++ b/configs/ls1043aqds_nand_defconfig
@@ -0,0 +1,5 @@
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,RAMBOOT_PBL,SPL_FSL_PBL,NAND_BOOT"
+CONFIG_ARM=y
+CONFIG_TARGET_LS1043AQDS=y
+CONFIG_SYS_NS16550=y
diff --git a/configs/ls1043aqds_nor_ddr3_defconfig b/configs/ls1043aqds_nor_ddr3_defconfig
new file mode 100644
index 0000000..5221ddb
--- /dev/null
+++ b/configs/ls1043aqds_nor_ddr3_defconfig
@@ -0,0 +1,3 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1043AQDS=y
+CONFIG_SYS_NS16550=y
diff --git a/configs/ls1043aqds_sdcard_ifc_defconfig b/configs/ls1043aqds_sdcard_ifc_defconfig
new file mode 100644
index 0000000..6765d3d
--- /dev/null
+++ b/configs/ls1043aqds_sdcard_ifc_defconfig
@@ -0,0 +1,5 @@
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT"
+CONFIG_ARM=y
+CONFIG_TARGET_LS1043AQDS=y
+CONFIG_SYS_NS16550=y
diff --git a/configs/ls1043ardb_defconfig b/configs/ls1043ardb_defconfig
index 3feac91..8622ce7 100644
--- a/configs/ls1043ardb_defconfig
+++ b/configs/ls1043ardb_defconfig
@@ -2,3 +2,8 @@ CONFIG_ARM=y
 CONFIG_TARGET_LS1043ARDB=y
 CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4"
 CONFIG_SYS_NS16550=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb"
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_SPI_FLASH=y
+CONFIG_DM_SPI=y
diff --git a/configs/ls1043ardb_nand_defconfig b/configs/ls1043ardb_nand_defconfig
index 605dbc0..c4f5f60 100644
--- a/configs/ls1043ardb_nand_defconfig
+++ b/configs/ls1043ardb_nand_defconfig
@@ -3,3 +3,8 @@ CONFIG_TARGET_LS1043ARDB=y
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND_BOOT,SYS_FSL_DDR4"
 CONFIG_SYS_NS16550=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb"
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_SPI_FLASH=y
+CONFIG_DM_SPI=y
diff --git a/configs/ls1043ardb_sdcard_defconfig b/configs/ls1043ardb_sdcard_defconfig
index ea925c3..6c7eda3 100644
--- a/configs/ls1043ardb_sdcard_defconfig
+++ b/configs/ls1043ardb_sdcard_defconfig
@@ -3,3 +3,8 @@ CONFIG_TARGET_LS1043ARDB=y
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT,SYS_FSL_DDR4"
 CONFIG_SYS_NS16550=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb"
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_SPI_FLASH=y
+CONFIG_DM_SPI=y
diff --git a/configs/ls2080a_emu_defconfig b/configs/ls2080a_emu_defconfig
new file mode 100644
index 0000000..d58d2d0
--- /dev/null
+++ b/configs/ls2080a_emu_defconfig
@@ -0,0 +1,15 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS2080A_EMU=y
+CONFIG_SYS_EXTRA_OPTIONS="EMU,SYS_FSL_DDR4, LS2080A"
+# CONFIG_CMD_CONSOLE is not set
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_EDITENV is not set
+# CONFIG_CMD_ENV_EXISTS is not set
+# CONFIG_CMD_LOADS is not set
+# CONFIG_CMD_FPGA is not set
+# CONFIG_CMD_ITEST is not set
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_CMD_NFS is not set
+# CONFIG_CMD_MISC is not set
+CONFIG_SYS_NS16550=y
diff --git a/configs/ls2080a_simu_defconfig b/configs/ls2080a_simu_defconfig
new file mode 100644
index 0000000..4c19b89
--- /dev/null
+++ b/configs/ls2080a_simu_defconfig
@@ -0,0 +1,16 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS2080A_SIMU=y
+CONFIG_SYS_EXTRA_OPTIONS="SIMU, LS2080A"
+# CONFIG_CMD_CONSOLE is not set
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_EDITENV is not set
+# CONFIG_CMD_ENV_EXISTS is not set
+# CONFIG_CMD_LOADS is not set
+# CONFIG_CMD_FPGA is not set
+# CONFIG_CMD_ITEST is not set
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_CMD_NFS is not set
+# CONFIG_CMD_MISC is not set
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SYS_NS16550=y
diff --git a/configs/ls2080aqds_defconfig b/configs/ls2080aqds_defconfig
new file mode 100644
index 0000000..6ac09ce
--- /dev/null
+++ b/configs/ls2080aqds_defconfig
@@ -0,0 +1,15 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS2080AQDS=y
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_DM_SPI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-qds"
+CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, LS2080A"
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_OF_CONTROL=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_SYS_NS16550=y
+CONFIG_FSL_DSPI=y
diff --git a/configs/ls2080aqds_nand_defconfig b/configs/ls2080aqds_nand_defconfig
new file mode 100644
index 0000000..b7d64f6
--- /dev/null
+++ b/configs/ls2080aqds_nand_defconfig
@@ -0,0 +1,9 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS2080AQDS=y
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, NAND, LS2080A"
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_SYS_NS16550=y
diff --git a/configs/ls2080ardb_defconfig b/configs/ls2080ardb_defconfig
new file mode 100644
index 0000000..1b30114
--- /dev/null
+++ b/configs/ls2080ardb_defconfig
@@ -0,0 +1,15 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS2080ARDB=y
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_DM_SPI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-rdb"
+CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, LS2080A"
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_OF_CONTROL=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_SYS_NS16550=y
+CONFIG_FSL_DSPI=y
diff --git a/configs/ls2080ardb_nand_defconfig b/configs/ls2080ardb_nand_defconfig
new file mode 100644
index 0000000..daed2e3
--- /dev/null
+++ b/configs/ls2080ardb_nand_defconfig
@@ -0,0 +1,9 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS2080ARDB=y
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, NAND, LS2080A"
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_SYS_NS16550=y
diff --git a/configs/ls2085a_emu_defconfig b/configs/ls2085a_emu_defconfig
index 0505d09..1c20a27 100644
--- a/configs/ls2085a_emu_defconfig
+++ b/configs/ls2085a_emu_defconfig
@@ -1,6 +1,6 @@
 CONFIG_ARM=y
-CONFIG_TARGET_LS2085A_EMU=y
-CONFIG_SYS_EXTRA_OPTIONS="EMU,SYS_FSL_DDR4"
+CONFIG_TARGET_LS2080A_EMU=y
+CONFIG_SYS_EXTRA_OPTIONS="EMU,SYS_FSL_DDR4, LS2085A"
 # CONFIG_CMD_CONSOLE is not set
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_XIMG is not set
diff --git a/configs/ls2085a_simu_defconfig b/configs/ls2085a_simu_defconfig
index 220a65a..38905ce 100644
--- a/configs/ls2085a_simu_defconfig
+++ b/configs/ls2085a_simu_defconfig
@@ -1,6 +1,6 @@
 CONFIG_ARM=y
-CONFIG_TARGET_LS2085A_SIMU=y
-CONFIG_SYS_EXTRA_OPTIONS="SIMU"
+CONFIG_TARGET_LS2080A_SIMU=y
+CONFIG_SYS_EXTRA_OPTIONS="SIMU, LS2085A"
 # CONFIG_CMD_CONSOLE is not set
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_XIMG is not set
diff --git a/configs/ls2085aqds_defconfig b/configs/ls2085aqds_defconfig
index 5b4f7eb..b4a1d8c 100644
--- a/configs/ls2085aqds_defconfig
+++ b/configs/ls2085aqds_defconfig
@@ -1,10 +1,10 @@
 CONFIG_ARM=y
-CONFIG_TARGET_LS2085AQDS=y
+CONFIG_TARGET_LS2080AQDS=y
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_DM_SPI=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2085a-qds"
-CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4"
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-qds"
+CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, LS2085A"
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_OF_CONTROL=y
 CONFIG_NET_RANDOM_ETHADDR=y
diff --git a/configs/ls2085aqds_nand_defconfig b/configs/ls2085aqds_nand_defconfig
index c010e58..b6bc7c6 100644
--- a/configs/ls2085aqds_nand_defconfig
+++ b/configs/ls2085aqds_nand_defconfig
@@ -1,7 +1,7 @@
 CONFIG_ARM=y
-CONFIG_TARGET_LS2085AQDS=y
+CONFIG_TARGET_LS2080AQDS=y
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,NAND"
+CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,NAND,LS2085A"
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_NETDEVICES=y
diff --git a/configs/ls2085ardb_defconfig b/configs/ls2085ardb_defconfig
index 764e48f..0f514ca 100644
--- a/configs/ls2085ardb_defconfig
+++ b/configs/ls2085ardb_defconfig
@@ -1,10 +1,10 @@
 CONFIG_ARM=y
-CONFIG_TARGET_LS2085ARDB=y
+CONFIG_TARGET_LS2080ARDB=y
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_DM_SPI=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2085a-rdb"
-CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4"
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-rdb"
+CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, LS2085A"
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_OF_CONTROL=y
 CONFIG_NET_RANDOM_ETHADDR=y
diff --git a/configs/ls2085ardb_nand_defconfig b/configs/ls2085ardb_nand_defconfig
index 76d4d34..593b8ca 100644
--- a/configs/ls2085ardb_nand_defconfig
+++ b/configs/ls2085ardb_nand_defconfig
@@ -1,7 +1,7 @@
 CONFIG_ARM=y
-CONFIG_TARGET_LS2085ARDB=y
+CONFIG_TARGET_LS2080ARDB=y
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,NAND"
+CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,NAND,LS2085A"
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_NETDEVICES=y
diff --git a/doc/README.fsl-trustzone-components b/doc/README.fsl-trustzone-components
index a3afd1f..e122346 100644
--- a/doc/README.fsl-trustzone-components
+++ b/doc/README.fsl-trustzone-components
@@ -1,4 +1,4 @@
-Freescale ARM64 SoCs like LS2085A have ARM TrustZone components like
+Freescale ARM64 SoCs like LS2080A have ARM TrustZone components like
 TZPC-BP147 (TrustZone Protection Controller) and TZASC-400 (TrustZone
 Address Space Controller).
 
@@ -7,7 +7,7 @@ is left to a root-of-trust security software layer (running in EL3
 privilege mode), but still some configurations of these peripherals
 might be required while the bootloader is executing in EL3 privilege
 mode. The following sections define how to turn on these features for
-LS2085A like SoCs.
+LS2080A like SoCs.
 
 TZPC-BP147 (TrustZone Protection Controller)
 ============================================
diff --git a/drivers/ddr/fsl/fsl_ddr_gen4.c b/drivers/ddr/fsl/fsl_ddr_gen4.c
index 49e4688..1de7b72 100644
--- a/drivers/ddr/fsl/fsl_ddr_gen4.c
+++ b/drivers/ddr/fsl/fsl_ddr_gen4.c
@@ -107,14 +107,14 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 		goto step2;
 
 #ifdef CONFIG_SYS_FSL_ERRATUM_A008336
-#ifdef CONFIG_LS2085A
+#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
 	/* A008336 only applies to general DDR controllers */
 	if ((ctrl_num == 0) || (ctrl_num == 1))
 #endif
 		ddr_out32(eddrtqcr1, 0x63b30002);
 #endif
 #ifdef CONFIG_SYS_FSL_ERRATUM_A008514
-#ifdef CONFIG_LS2085A
+#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
 	/* A008514 only applies to DP-DDR controler */
 	if (ctrl_num == 2)
 #endif
@@ -423,16 +423,16 @@ step2:
 	if (getenv_f("ddr_bist", buffer, CONFIG_SYS_CBSIZE) >= 0) {
 		puts("Running BIST test. This will take a while...");
 		cs0_config = ddr_in32(&ddr->cs0_config);
+		cs0_bnds = ddr_in32(&ddr->cs0_bnds);
+		cs1_bnds = ddr_in32(&ddr->cs1_bnds);
+		cs2_bnds = ddr_in32(&ddr->cs2_bnds);
+		cs3_bnds = ddr_in32(&ddr->cs3_bnds);
 		if (cs0_config & CTLR_INTLV_MASK) {
-			cs0_bnds = ddr_in32(&cs0_bnds);
-			cs1_bnds = ddr_in32(&cs1_bnds);
-			cs2_bnds = ddr_in32(&cs2_bnds);
-			cs3_bnds = ddr_in32(&cs3_bnds);
 			/* set bnds to non-interleaving */
-			ddr_out32(&cs0_bnds, (cs0_bnds & 0xfffefffe) >> 1);
-			ddr_out32(&cs1_bnds, (cs1_bnds & 0xfffefffe) >> 1);
-			ddr_out32(&cs2_bnds, (cs2_bnds & 0xfffefffe) >> 1);
-			ddr_out32(&cs3_bnds, (cs3_bnds & 0xfffefffe) >> 1);
+			ddr_out32(&ddr->cs0_bnds, (cs0_bnds & 0xfffefffe) >> 1);
+			ddr_out32(&ddr->cs1_bnds, (cs1_bnds & 0xfffefffe) >> 1);
+			ddr_out32(&ddr->cs2_bnds, (cs2_bnds & 0xfffefffe) >> 1);
+			ddr_out32(&ddr->cs3_bnds, (cs3_bnds & 0xfffefffe) >> 1);
 		}
 		ddr_out32(&ddr->mtp1, BIST_PATTERN1);
 		ddr_out32(&ddr->mtp2, BIST_PATTERN1);
@@ -469,10 +469,10 @@ step2:
 
 		if (cs0_config & CTLR_INTLV_MASK) {
 			/* restore bnds registers */
-			ddr_out32(&cs0_bnds, cs0_bnds);
-			ddr_out32(&cs1_bnds, cs1_bnds);
-			ddr_out32(&cs2_bnds, cs2_bnds);
-			ddr_out32(&cs3_bnds, cs3_bnds);
+			ddr_out32(&ddr->cs0_bnds, cs0_bnds);
+			ddr_out32(&ddr->cs1_bnds, cs1_bnds);
+			ddr_out32(&ddr->cs2_bnds, cs2_bnds);
+			ddr_out32(&ddr->cs3_bnds, cs3_bnds);
 		}
 	}
 #endif
diff --git a/drivers/ddr/fsl/main.c b/drivers/ddr/fsl/main.c
index 72ec1be..c686632 100644
--- a/drivers/ddr/fsl/main.c
+++ b/drivers/ddr/fsl/main.c
@@ -813,6 +813,7 @@ phys_size_t fsl_ddr_sdram(void)
 	info.board_need_mem_reset = board_need_mem_reset;
 	info.board_mem_reset = board_assert_mem_reset;
 	info.board_mem_de_reset = board_deassert_mem_reset;
+	remove_unused_controllers(&info);
 
 	return __fsl_ddr_sdram(&info);
 }
diff --git a/drivers/ddr/fsl/util.c b/drivers/ddr/fsl/util.c
index ce55aea..1a49b28 100644
--- a/drivers/ddr/fsl/util.c
+++ b/drivers/ddr/fsl/util.c
@@ -385,3 +385,43 @@ void fsl_ddr_sync_memctl_refresh(unsigned int first_ctrl,
 		ddr_out32(ddrc_debug2_p[i], ddrc_debug2[i]);
 }
 #endif /* CONFIG_FSL_DDR_SYNC_REFRESH */
+
+void remove_unused_controllers(fsl_ddr_info_t *info)
+{
+#ifdef CONFIG_FSL_LSCH3
+	int i;
+	u64 nodeid;
+	void *hnf_sam_ctrl = (void *)(CCI_HN_F_0_BASE + CCN_HN_F_SAM_CTL);
+	bool ddr0_used = false;
+	bool ddr1_used = false;
+
+	for (i = 0; i < 8; i++) {
+		nodeid = in_le64(hnf_sam_ctrl) & CCN_HN_F_SAM_NODEID_MASK;
+		if (nodeid == CCN_HN_F_SAM_NODEID_DDR0) {
+			ddr0_used = true;
+		} else if (nodeid == CCN_HN_F_SAM_NODEID_DDR1) {
+			ddr1_used = true;
+		} else {
+			printf("Unknown nodeid in HN-F SAM control: 0x%llx\n",
+			       nodeid);
+		}
+		hnf_sam_ctrl += (CCI_HN_F_1_BASE - CCI_HN_F_0_BASE);
+	}
+	if (!ddr0_used && !ddr1_used) {
+		printf("Invalid configuration in HN-F SAM control\n");
+		return;
+	}
+
+	if (!ddr0_used && info->first_ctrl == 0) {
+		info->first_ctrl = 1;
+		info->num_ctrls = 1;
+		debug("First DDR controller disabled\n");
+		return;
+	}
+
+	if (!ddr1_used && info->first_ctrl + info->num_ctrls > 1) {
+		info->num_ctrls = 1;
+		debug("Second DDR controller disabled\n");
+	}
+#endif
+}
diff --git a/drivers/net/fsl-mc/Makefile b/drivers/net/fsl-mc/Makefile
index 7563a5f..a492388 100644
--- a/drivers/net/fsl-mc/Makefile
+++ b/drivers/net/fsl-mc/Makefile
@@ -10,5 +10,6 @@ obj-y += mc.o \
 	dpmng.o	\
 	dprc.o	\
 	dpbp.o	\
-	dpni.o
+	dpni.o	\
+	dpmac.o
 obj-y += dpio/
diff --git a/drivers/net/fsl-mc/dpbp.c b/drivers/net/fsl-mc/dpbp.c
index 1517a70..ba9536d 100644
--- a/drivers/net/fsl-mc/dpbp.c
+++ b/drivers/net/fsl-mc/dpbp.c
@@ -49,6 +49,47 @@ int dpbp_close(struct fsl_mc_io *mc_io,
 	return mc_send_command(mc_io, &cmd);
 }
 
+int dpbp_create(struct fsl_mc_io *mc_io,
+		uint32_t cmd_flags,
+		const struct dpbp_cfg *cfg,
+		uint16_t *token)
+{
+	struct mc_command cmd = { 0 };
+	int err;
+
+	(void)(cfg); /* unused */
+
+	/* prepare command */
+	cmd.header = mc_encode_cmd_header(DPBP_CMDID_CREATE,
+					  cmd_flags,
+					  0);
+
+	/* send command to mc*/
+	err = mc_send_command(mc_io, &cmd);
+	if (err)
+		return err;
+
+	/* retrieve response parameters */
+	*token = MC_CMD_HDR_READ_TOKEN(cmd.header);
+
+	return 0;
+}
+
+int dpbp_destroy(struct fsl_mc_io *mc_io,
+		 uint32_t cmd_flags,
+		 uint16_t token)
+{
+	struct mc_command cmd = { 0 };
+
+	/* prepare command */
+	cmd.header = mc_encode_cmd_header(DPBP_CMDID_DESTROY,
+					  cmd_flags,
+					  token);
+
+	/* send command to mc*/
+	return mc_send_command(mc_io, &cmd);
+}
+
 int dpbp_enable(struct fsl_mc_io *mc_io,
 		uint32_t cmd_flags,
 		uint16_t token)
diff --git a/drivers/net/fsl-mc/dpio/dpio.c b/drivers/net/fsl-mc/dpio/dpio.c
index cd3fd50..b61df52 100644
--- a/drivers/net/fsl-mc/dpio/dpio.c
+++ b/drivers/net/fsl-mc/dpio/dpio.c
@@ -48,6 +48,46 @@ int dpio_close(struct fsl_mc_io *mc_io,
 	return mc_send_command(mc_io, &cmd);
 }
 
+int dpio_create(struct fsl_mc_io *mc_io,
+		uint32_t cmd_flags,
+		const struct dpio_cfg *cfg,
+		uint16_t *token)
+{
+	struct mc_command cmd = { 0 };
+	int err;
+
+	/* prepare command */
+	cmd.header = mc_encode_cmd_header(DPIO_CMDID_CREATE,
+					  cmd_flags,
+					  0);
+	DPIO_CMD_CREATE(cmd, cfg);
+
+	/* send command to mc*/
+	err = mc_send_command(mc_io, &cmd);
+	if (err)
+		return err;
+
+	/* retrieve response parameters */
+	*token = MC_CMD_HDR_READ_TOKEN(cmd.header);
+
+	return 0;
+}
+
+int dpio_destroy(struct fsl_mc_io *mc_io,
+		 uint32_t cmd_flags,
+		 uint16_t token)
+{
+	struct mc_command cmd = { 0 };
+
+	/* prepare command */
+	cmd.header = mc_encode_cmd_header(DPIO_CMDID_DESTROY,
+					  cmd_flags,
+					  token);
+
+	/* send command to mc*/
+	return mc_send_command(mc_io, &cmd);
+}
+
 int dpio_enable(struct fsl_mc_io *mc_io,
 		uint32_t cmd_flags,
 		uint16_t token)
diff --git a/drivers/net/fsl-mc/dpmac.c b/drivers/net/fsl-mc/dpmac.c
new file mode 100644
index 0000000..072a90d
--- /dev/null
+++ b/drivers/net/fsl-mc/dpmac.c
@@ -0,0 +1,222 @@
+/*
+ * Freescale Layerscape MC I/O wrapper
+ *
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ * Author: Prabhakar Kushwaha <prabhakar@freescale.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <fsl-mc/fsl_mc_sys.h>
+#include <fsl-mc/fsl_mc_cmd.h>
+#include <fsl-mc/fsl_dpmac.h>
+
+int dpmac_open(struct fsl_mc_io *mc_io,
+	       uint32_t cmd_flags,
+	       int dpmac_id,
+	       uint16_t *token)
+{
+	struct mc_command cmd = { 0 };
+	int err;
+
+	/* prepare command */
+	cmd.header = mc_encode_cmd_header(DPMAC_CMDID_OPEN,
+					  cmd_flags,
+					  0);
+	DPMAC_CMD_OPEN(cmd, dpmac_id);
+
+	/* send command to mc*/
+	err = mc_send_command(mc_io, &cmd);
+	if (err)
+		return err;
+
+	/* retrieve response parameters */
+	*token = MC_CMD_HDR_READ_TOKEN(cmd.header);
+
+	return err;
+}
+
+int dpmac_close(struct fsl_mc_io *mc_io,
+		uint32_t cmd_flags,
+		uint16_t token)
+{
+	struct mc_command cmd = { 0 };
+
+	/* prepare command */
+	cmd.header = mc_encode_cmd_header(DPMAC_CMDID_CLOSE, cmd_flags,
+					  token);
+
+	/* send command to mc*/
+	return mc_send_command(mc_io, &cmd);
+}
+
+int dpmac_create(struct fsl_mc_io *mc_io,
+		 uint32_t cmd_flags,
+		 const struct dpmac_cfg *cfg,
+		 uint16_t *token)
+{
+	struct mc_command cmd = { 0 };
+	int err;
+
+	/* prepare command */
+	cmd.header = mc_encode_cmd_header(DPMAC_CMDID_CREATE,
+					  cmd_flags,
+					  0);
+	DPMAC_CMD_CREATE(cmd, cfg);
+
+	/* send command to mc*/
+	err = mc_send_command(mc_io, &cmd);
+	if (err)
+		return err;
+
+	/* retrieve response parameters */
+	*token = MC_CMD_HDR_READ_TOKEN(cmd.header);
+
+	return 0;
+}
+
+int dpmac_destroy(struct fsl_mc_io *mc_io,
+		  uint32_t cmd_flags,
+		  uint16_t token)
+{
+	struct mc_command cmd = { 0 };
+
+	/* prepare command */
+	cmd.header = mc_encode_cmd_header(DPMAC_CMDID_DESTROY,
+					  cmd_flags,
+					  token);
+
+	/* send command to mc*/
+	return mc_send_command(mc_io, &cmd);
+}
+
+int dpmac_get_attributes(struct fsl_mc_io *mc_io,
+			 uint32_t cmd_flags,
+			 uint16_t token,
+			 struct dpmac_attr *attr)
+{
+	struct mc_command cmd = { 0 };
+	int err;
+
+	/* prepare command */
+	cmd.header = mc_encode_cmd_header(DPMAC_CMDID_GET_ATTR,
+					  cmd_flags,
+					  token);
+
+	/* send command to mc*/
+	err = mc_send_command(mc_io, &cmd);
+	if (err)
+		return err;
+
+	/* retrieve response parameters */
+	DPMAC_RSP_GET_ATTRIBUTES(cmd, attr);
+
+	return 0;
+}
+
+int dpmac_mdio_read(struct fsl_mc_io *mc_io,
+		    uint32_t cmd_flags,
+		    uint16_t token,
+		    struct dpmac_mdio_cfg *cfg)
+{
+	struct mc_command cmd = { 0 };
+	int err;
+
+	/* prepare command */
+	cmd.header = mc_encode_cmd_header(DPMAC_CMDID_MDIO_READ,
+					  cmd_flags,
+					  token);
+	DPMAC_CMD_MDIO_READ(cmd, cfg);
+
+	/* send command to mc*/
+	err = mc_send_command(mc_io, &cmd);
+	if (err)
+		return err;
+
+	/* retrieve response parameters */
+	DPMAC_RSP_MDIO_READ(cmd, cfg->data);
+
+	return 0;
+}
+
+int dpmac_mdio_write(struct fsl_mc_io *mc_io,
+		     uint32_t cmd_flags,
+		     uint16_t token,
+		     struct dpmac_mdio_cfg *cfg)
+{
+	struct mc_command cmd = { 0 };
+
+	/* prepare command */
+	cmd.header = mc_encode_cmd_header(DPMAC_CMDID_MDIO_WRITE,
+					  cmd_flags,
+					  token);
+	DPMAC_CMD_MDIO_WRITE(cmd, cfg);
+
+	/* send command to mc*/
+	return mc_send_command(mc_io, &cmd);
+}
+
+int dpmac_get_link_cfg(struct fsl_mc_io *mc_io,
+		       uint32_t cmd_flags,
+		       uint16_t token,
+		       struct dpmac_link_cfg *cfg)
+{
+	struct mc_command cmd = { 0 };
+	int err = 0;
+
+	/* prepare command */
+	cmd.header = mc_encode_cmd_header(DPMAC_CMDID_GET_LINK_CFG,
+					  cmd_flags,
+					  token);
+
+	/* send command to mc*/
+	err = mc_send_command(mc_io, &cmd);
+	if (err)
+		return err;
+
+	DPMAC_RSP_GET_LINK_CFG(cmd, cfg);
+
+	return 0;
+}
+
+int dpmac_set_link_state(struct fsl_mc_io *mc_io,
+			 uint32_t cmd_flags,
+			 uint16_t token,
+			 struct dpmac_link_state *link_state)
+{
+	struct mc_command cmd = { 0 };
+
+	/* prepare command */
+	cmd.header = mc_encode_cmd_header(DPMAC_CMDID_SET_LINK_STATE,
+					  cmd_flags,
+					  token);
+	DPMAC_CMD_SET_LINK_STATE(cmd, link_state);
+
+	/* send command to mc*/
+	return mc_send_command(mc_io, &cmd);
+}
+
+int dpmac_get_counter(struct fsl_mc_io *mc_io,
+		      uint32_t cmd_flags,
+		      uint16_t token,
+		      enum dpmac_counter type,
+		      uint64_t *counter)
+{
+	struct mc_command cmd = { 0 };
+	int err = 0;
+
+	/* prepare command */
+	cmd.header = mc_encode_cmd_header(DPMAC_CMDID_GET_COUNTER,
+					  cmd_flags,
+					  token);
+	DPMAC_CMD_GET_COUNTER(cmd, type);
+
+	/* send command to mc*/
+	err = mc_send_command(mc_io, &cmd);
+	if (err)
+		return err;
+
+	DPMAC_RSP_GET_COUNTER(cmd, *counter);
+
+	return 0;
+}
diff --git a/drivers/net/fsl-mc/dpni.c b/drivers/net/fsl-mc/dpni.c
index 9111f35..eacb3c8 100644
--- a/drivers/net/fsl-mc/dpni.c
+++ b/drivers/net/fsl-mc/dpni.c
@@ -48,6 +48,46 @@ int dpni_close(struct fsl_mc_io *mc_io,
 	return mc_send_command(mc_io, &cmd);
 }
 
+int dpni_create(struct fsl_mc_io *mc_io,
+		uint32_t cmd_flags,
+		const struct dpni_cfg *cfg,
+		uint16_t *token)
+{
+	struct mc_command cmd = { 0 };
+	int err;
+
+	/* prepare command */
+	cmd.header = mc_encode_cmd_header(DPNI_CMDID_CREATE,
+					  cmd_flags,
+					  0);
+	DPNI_CMD_CREATE(cmd, cfg);
+
+	/* send command to mc*/
+	err = mc_send_command(mc_io, &cmd);
+	if (err)
+		return err;
+
+	/* retrieve response parameters */
+	*token = MC_CMD_HDR_READ_TOKEN(cmd.header);
+
+	return 0;
+}
+
+int dpni_destroy(struct fsl_mc_io *mc_io,
+		 uint32_t cmd_flags,
+		 uint16_t token)
+{
+	struct mc_command cmd = { 0 };
+
+	/* prepare command */
+	cmd.header = mc_encode_cmd_header(DPNI_CMDID_DESTROY,
+					  cmd_flags,
+					  token);
+
+	/* send command to mc*/
+	return mc_send_command(mc_io, &cmd);
+}
+
 int dpni_set_pools(struct fsl_mc_io *mc_io,
 		   uint32_t cmd_flags,
 		   uint16_t token,
diff --git a/drivers/net/fsl-mc/dprc.c b/drivers/net/fsl-mc/dprc.c
index 357aa48..7d34355 100644
--- a/drivers/net/fsl-mc/dprc.c
+++ b/drivers/net/fsl-mc/dprc.c
@@ -72,6 +72,52 @@ int dprc_close(struct fsl_mc_io *mc_io,
 	return mc_send_command(mc_io, &cmd);
 }
 
+int dprc_create_container(struct fsl_mc_io *mc_io,
+			  uint32_t cmd_flags,
+			  uint16_t token,
+			  struct dprc_cfg *cfg,
+			  int *child_container_id,
+			  uint64_t *child_portal_paddr)
+{
+	struct mc_command cmd = { 0 };
+	int err;
+
+	/* prepare command */
+	DPRC_CMD_CREATE_CONTAINER(cmd, cfg);
+
+	cmd.header = mc_encode_cmd_header(DPRC_CMDID_CREATE_CONT,
+					  cmd_flags,
+					  token);
+
+	/* send command to mc*/
+	err = mc_send_command(mc_io, &cmd);
+	if (err)
+		return err;
+
+	/* retrieve response parameters */
+	DPRC_RSP_CREATE_CONTAINER(cmd, *child_container_id,
+				  *child_portal_paddr);
+
+	return 0;
+}
+
+int dprc_destroy_container(struct fsl_mc_io *mc_io,
+			   uint32_t cmd_flags,
+			   uint16_t token,
+			   int child_container_id)
+{
+	struct mc_command cmd = { 0 };
+
+	/* prepare command */
+	cmd.header = mc_encode_cmd_header(DPRC_CMDID_DESTROY_CONT,
+					  cmd_flags,
+					  token);
+	DPRC_CMD_DESTROY_CONTAINER(cmd, child_container_id);
+
+	/* send command to mc*/
+	return mc_send_command(mc_io, &cmd);
+}
+
 int dprc_reset_container(struct fsl_mc_io *mc_io,
 			 uint32_t cmd_flags,
 			 uint16_t token,
diff --git a/drivers/net/fsl-mc/mc.c b/drivers/net/fsl-mc/mc.c
index ea987d7..e1a02d1 100644
--- a/drivers/net/fsl-mc/mc.c
+++ b/drivers/net/fsl-mc/mc.c
@@ -14,7 +14,9 @@
 #include <fsl-mc/fsl_dpmng.h>
 #include <fsl-mc/fsl_dprc.h>
 #include <fsl-mc/fsl_dpio.h>
+#include <fsl-mc/fsl_dpni.h>
 #include <fsl-mc/fsl_qbman_portal.h>
+#include <fsl-mc/ldpaa_wriop.h>
 
 #define MC_RAM_BASE_ADDR_ALIGNMENT  (512UL * 1024 * 1024)
 #define MC_RAM_BASE_ADDR_ALIGNMENT_MASK	(~(MC_RAM_BASE_ADDR_ALIGNMENT - 1))
@@ -24,12 +26,19 @@
 #define MC_BOOT_TIMEOUT_ENV_VAR	"mcboottimeout"
 
 DECLARE_GLOBAL_DATA_PTR;
-static int mc_boot_status;
-struct fsl_mc_io *dflt_mc_io = NULL;
+static int mc_boot_status = -1;
+static int mc_dpl_applied = -1;
+#ifdef CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET
+static int mc_aiop_applied = -1;
+#endif
+struct fsl_mc_io *root_mc_io = NULL;
+struct fsl_mc_io *dflt_mc_io = NULL; /* child container */
+uint16_t root_dprc_handle = 0;
 uint16_t dflt_dprc_handle = 0;
+int child_dprc_id;
 struct fsl_dpbp_obj *dflt_dpbp = NULL;
 struct fsl_dpio_obj *dflt_dpio = NULL;
-uint16_t dflt_dpio_handle = 0;
+struct fsl_dpni_obj *dflt_dpni = NULL;
 
 #ifdef DEBUG
 void dump_ram_words(const char *title, void *addr)
@@ -93,7 +102,8 @@ static int mc_copy_image(const char *title,
  * Returns 0 on success and a negative errno on error.
  * task fail.
  **/
-int parse_mc_firmware_fit_image(const void **raw_image_addr,
+int parse_mc_firmware_fit_image(u64 mc_fw_addr,
+				const void **raw_image_addr,
 				size_t *raw_image_size)
 {
 	int format;
@@ -103,36 +113,31 @@ int parse_mc_firmware_fit_image(const void **raw_image_addr,
 	size_t size;
 	const char *uname = "firmware";
 
-	/* Check if the image is in NOR flash */
-#ifdef CONFIG_SYS_LS_MC_FW_IN_NOR
-	fit_hdr = (void *)CONFIG_SYS_LS_MC_FW_ADDR;
-#else
-#error "No CONFIG_SYS_LS_MC_FW_IN_xxx defined"
-#endif
+	fit_hdr = (void *)mc_fw_addr;
 
 	/* Check if Image is in FIT format */
 	format = genimg_get_format(fit_hdr);
 
 	if (format != IMAGE_FORMAT_FIT) {
-		printf("fsl-mc: ERROR: Bad firmware image (not a FIT image)\n");
+		printf("fsl-mc: ERR: Bad firmware image (not a FIT image)\n");
 		return -EINVAL;
 	}
 
 	if (!fit_check_format(fit_hdr)) {
-		printf("fsl-mc: ERROR: Bad firmware image (bad FIT header)\n");
+		printf("fsl-mc: ERR: Bad firmware image (bad FIT header)\n");
 		return -EINVAL;
 	}
 
 	node_offset = fit_image_get_node(fit_hdr, uname);
 
 	if (node_offset < 0) {
-		printf("fsl-mc: ERROR: Bad firmware image (missing subimage)\n");
+		printf("fsl-mc: ERR: Bad firmware image (missing subimage)\n");
 		return -ENOENT;
 	}
 
 	/* Verify MC firmware image */
 	if (!(fit_image_verify(fit_hdr, node_offset))) {
-		printf("fsl-mc: ERROR: Bad firmware image (bad CRC)\n");
+		printf("fsl-mc: ERR: Bad firmware image (bad CRC)\n");
 		return -EINVAL;
 	}
 
@@ -218,7 +223,7 @@ static int mc_fixup_dpc(u64 dpc_addr)
 	return 0;
 }
 
-static int load_mc_dpc(u64 mc_ram_addr, size_t mc_ram_size)
+static int load_mc_dpc(u64 mc_ram_addr, size_t mc_ram_size, u64 mc_dpc_addr)
 {
 	u64 mc_dpc_offset;
 #ifndef CONFIG_SYS_LS_MC_DPC_IN_DDR
@@ -245,11 +250,7 @@ static int load_mc_dpc(u64 mc_ram_addr, size_t mc_ram_size)
 	/*
 	 * Get address and size of the DPC blob stored in flash:
 	 */
-#ifdef CONFIG_SYS_LS_MC_DPC_IN_NOR
-	dpc_fdt_hdr = (void *)CONFIG_SYS_LS_MC_DPC_ADDR;
-#else
-#error "No CONFIG_SYS_LS_MC_DPC_IN_xxx defined"
-#endif
+	dpc_fdt_hdr = (void *)mc_dpc_addr;
 
 	error = fdt_check_header(dpc_fdt_hdr);
 	if (error != 0) {
@@ -279,7 +280,7 @@ static int load_mc_dpc(u64 mc_ram_addr, size_t mc_ram_size)
 	return 0;
 }
 
-static int load_mc_dpl(u64 mc_ram_addr, size_t mc_ram_size)
+static int load_mc_dpl(u64 mc_ram_addr, size_t mc_ram_size, u64 mc_dpl_addr)
 {
 	u64 mc_dpl_offset;
 #ifndef CONFIG_SYS_LS_MC_DPL_IN_DDR
@@ -306,11 +307,7 @@ static int load_mc_dpl(u64 mc_ram_addr, size_t mc_ram_size)
 	/*
 	 * Get address and size of the DPL blob stored in flash:
 	 */
-#ifdef CONFIG_SYS_LS_MC_DPL_IN_NOR
-	dpl_fdt_hdr = (void *)CONFIG_SYS_LS_MC_DPL_ADDR;
-#else
-#error "No CONFIG_SYS_LS_MC_DPL_IN_xxx defined"
-#endif
+	dpl_fdt_hdr = (void *)mc_dpl_addr;
 
 	error = fdt_check_header(dpl_fdt_hdr);
 	if (error != 0) {
@@ -357,23 +354,33 @@ static unsigned long get_mc_boot_timeout_ms(void)
 	return timeout_ms;
 }
 
-#ifdef CONFIG_SYS_LS_MC_AIOP_IMG_IN_NOR
-static int load_mc_aiop_img(u64 mc_ram_addr, size_t mc_ram_size)
+#ifdef CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET
+static int load_mc_aiop_img(u64 aiop_fw_addr)
 {
+	u64 mc_ram_addr = mc_get_dram_addr();
+#ifndef CONFIG_SYS_LS_MC_DPC_IN_DDR
 	void *aiop_img;
+#endif
 
 	/*
 	 * Load the MC AIOP image in the MC private DRAM block:
 	 */
 
-	aiop_img = (void *)CONFIG_SYS_LS_MC_AIOP_IMG_ADDR;
+#ifdef CONFIG_SYS_LS_MC_DPC_IN_DDR
+	printf("MC AIOP is preloaded to %#llx\n", mc_ram_addr +
+	       CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET);
+#else
+	aiop_img = (void *)aiop_fw_addr;
 	mc_copy_image("MC AIOP image",
 		      (u64)aiop_img, CONFIG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH,
 		      mc_ram_addr + CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET);
+#endif
+	mc_aiop_applied = 0;
 
 	return 0;
 }
 #endif
+
 static int wait_for_mc(bool booting_mc, u32 *final_reg_gsr)
 {
 	u32 reg_gsr;
@@ -420,12 +427,12 @@ static int wait_for_mc(bool booting_mc, u32 *final_reg_gsr)
 	return 0;
 }
 
-int mc_init(void)
+int mc_init(u64 mc_fw_addr, u64 mc_dpc_addr)
 {
 	int error = 0;
 	int portal_id = 0;
 	struct mc_ccsr_registers __iomem *mc_ccsr_regs = MC_CCSR_BASE_ADDR;
-	u64 mc_ram_addr;
+	u64 mc_ram_addr = mc_get_dram_addr();
 	u32 reg_gsr;
 	u32 reg_mcfbalr;
 #ifndef CONFIG_SYS_LS_MC_FW_IN_DDR
@@ -437,17 +444,6 @@ int mc_init(void)
 	u8 mc_ram_num_256mb_blocks;
 	size_t mc_ram_size = mc_get_dram_block_size();
 
-	/*
-	 * The MC private DRAM block was already carved at the end of DRAM
-	 * by board_init_f() using CONFIG_SYS_MEM_TOP_HIDE:
-	 */
-	if (gd->bd->bi_dram[1].start) {
-		mc_ram_addr =
-			gd->bd->bi_dram[1].start + gd->bd->bi_dram[1].size;
-	} else {
-		mc_ram_addr =
-			gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size;
-	}
 
 	error = calculate_mc_private_ram_params(mc_ram_addr,
 						mc_ram_size,
@@ -474,7 +470,8 @@ int mc_init(void)
 #ifdef CONFIG_SYS_LS_MC_FW_IN_DDR
 	printf("MC firmware is preloaded to %#llx\n", mc_ram_addr);
 #else
-	error = parse_mc_firmware_fit_image(&raw_image_addr, &raw_image_size);
+	error = parse_mc_firmware_fit_image(mc_fw_addr, &raw_image_addr,
+					    &raw_image_size);
 	if (error != 0)
 		goto out;
 	/*
@@ -485,20 +482,10 @@ int mc_init(void)
 #endif
 	dump_ram_words("firmware", (void *)mc_ram_addr);
 
-	error = load_mc_dpc(mc_ram_addr, mc_ram_size);
+	error = load_mc_dpc(mc_ram_addr, mc_ram_size, mc_dpc_addr);
 	if (error != 0)
 		goto out;
 
-	error = load_mc_dpl(mc_ram_addr, mc_ram_size);
-	if (error != 0)
-		goto out;
-
-#ifdef CONFIG_SYS_LS_MC_AIOP_IMG_IN_NOR
-	error = load_mc_aiop_img(mc_ram_addr, mc_ram_size);
-	if (error != 0)
-		goto out;
-#endif
-
 	debug("mc_ccsr_regs %p\n", mc_ccsr_regs);
 	dump_mc_ccsr_regs(mc_ccsr_regs);
 
@@ -537,17 +524,17 @@ int mc_init(void)
 	 * Initialize the global default MC portal
 	 * And check that the MC firmware is responding portal commands:
 	 */
-	dflt_mc_io = (struct fsl_mc_io *)malloc(sizeof(struct fsl_mc_io));
-	if (!dflt_mc_io) {
+	root_mc_io = (struct fsl_mc_io *)malloc(sizeof(struct fsl_mc_io));
+	if (!root_mc_io) {
 		printf(" No memory: malloc() failed\n");
 		return -ENOMEM;
 	}
 
-	dflt_mc_io->mmio_regs = SOC_MC_PORTAL_ADDR(portal_id);
+	root_mc_io->mmio_regs = SOC_MC_PORTAL_ADDR(portal_id);
 	debug("Checking access to MC portal of root DPRC container (portal_id %d, portal physical addr %p)\n",
-	      portal_id, dflt_mc_io->mmio_regs);
+	      portal_id, root_mc_io->mmio_regs);
 
-	error = mc_get_version(dflt_mc_io, MC_CMD_NO_FLAGS, &mc_ver_info);
+	error = mc_get_version(root_mc_io, MC_CMD_NO_FLAGS, &mc_ver_info);
 	if (error != 0) {
 		printf("fsl-mc: ERROR: Firmware version check failed (error: %d)\n",
 		       error);
@@ -571,20 +558,36 @@ int mc_init(void)
 	       mc_ver_info.major, mc_ver_info.minor, mc_ver_info.revision,
 	       reg_gsr & GSR_FS_MASK);
 
+out:
+	if (error != 0)
+		mc_boot_status = error;
+	else
+		mc_boot_status = 0;
+
+	return error;
+}
+
+int mc_apply_dpl(u64 mc_dpl_addr)
+{
+	struct mc_ccsr_registers __iomem *mc_ccsr_regs = MC_CCSR_BASE_ADDR;
+	int error = 0;
+	u32 reg_gsr;
+	u64 mc_ram_addr = mc_get_dram_addr();
+	size_t mc_ram_size = mc_get_dram_block_size();
+
+	error = load_mc_dpl(mc_ram_addr, mc_ram_size, mc_dpl_addr);
+	if (error != 0)
+		return error;
+
 	/*
 	 * Tell the MC to deploy the DPL:
 	 */
 	out_le32(&mc_ccsr_regs->reg_gsr, 0x0);
 	printf("fsl-mc: Deploying data path layout ... ");
 	error = wait_for_mc(false, &reg_gsr);
-	if (error != 0)
-		goto out;
 
-out:
-	if (error != 0)
-		mc_boot_status = error;
-	else
-		mc_boot_status = 0;
+	if (!error)
+		mc_dpl_applied = 0;
 
 	return error;
 }
@@ -594,6 +597,40 @@ int get_mc_boot_status(void)
 	return mc_boot_status;
 }
 
+#ifdef CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET
+int get_aiop_apply_status(void)
+{
+	return mc_aiop_applied;
+}
+#endif
+
+int get_dpl_apply_status(void)
+{
+	return mc_dpl_applied;
+}
+
+/**
+ * Return the MC address of private DRAM block.
+ */
+u64 mc_get_dram_addr(void)
+{
+	u64 mc_ram_addr;
+
+	/*
+	 * The MC private DRAM block was already carved at the end of DRAM
+	 * by board_init_f() using CONFIG_SYS_MEM_TOP_HIDE:
+	 */
+	if (gd->bd->bi_dram[1].start) {
+		mc_ram_addr =
+			gd->bd->bi_dram[1].start + gd->bd->bi_dram[1].size;
+	} else {
+		mc_ram_addr =
+			gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size;
+	}
+
+	return mc_ram_addr;
+}
+
 /**
  * Return the actual size of the MC private DRAM block.
  */
@@ -620,36 +657,57 @@ unsigned long mc_get_dram_block_size(void)
 	return dram_block_size;
 }
 
-int dpio_init(struct dprc_obj_desc obj_desc)
+int fsl_mc_ldpaa_init(bd_t *bis)
+{
+	int i;
+
+	for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++)
+		if ((wriop_is_enabled_dpmac(i) == 1) &&
+		    (wriop_get_phy_address(i) != -1))
+			ldpaa_eth_init(i, wriop_get_enet_if(i));
+	return 0;
+}
+
+static int dpio_init(void)
 {
 	struct qbman_swp_desc p_des;
 	struct dpio_attr attr;
+	struct dpio_cfg dpio_cfg;
 	int err = 0;
 
 	dflt_dpio = (struct fsl_dpio_obj *)malloc(sizeof(struct fsl_dpio_obj));
 	if (!dflt_dpio) {
-		printf(" No memory: malloc() failed\n");
-		return -ENOMEM;
+		printf("No memory: malloc() failed\n");
+		err = -ENOMEM;
+		goto err_malloc;
 	}
 
-	dflt_dpio->dpio_id = obj_desc.id;
+	dpio_cfg.channel_mode = DPIO_LOCAL_CHANNEL;
+	dpio_cfg.num_priorities = 8;
 
-	err = dpio_open(dflt_mc_io, MC_CMD_NO_FLAGS, obj_desc.id,
-			&dflt_dpio_handle);
-	if (err) {
-		printf("dpio_open() failed\n");
-		goto err_open;
+	err = dpio_create(dflt_mc_io, MC_CMD_NO_FLAGS, &dpio_cfg,
+			  &dflt_dpio->dpio_handle);
+	if (err < 0) {
+		printf("dpio_create() failed: %d\n", err);
+		err = -ENODEV;
+		goto err_create;
 	}
 
+	memset(&attr, 0, sizeof(struct dpio_attr));
 	err = dpio_get_attributes(dflt_mc_io, MC_CMD_NO_FLAGS,
-				  dflt_dpio_handle, &attr);
-	if (err) {
-		printf("dpio_get_attributes() failed %d\n", err);
+				  dflt_dpio->dpio_handle, &attr);
+	if (err < 0) {
+		printf("dpio_get_attributes() failed: %d\n", err);
 		goto err_get_attr;
 	}
 
-	err = dpio_enable(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dpio_handle);
-	if (err) {
+	dflt_dpio->dpio_id = attr.id;
+#ifdef DEBUG
+	printf("Init: DPIO id=0x%d\n", dflt_dpio->dpio_id);
+#endif
+
+	err = dpio_enable(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dpio->dpio_handle);
+	if (err < 0) {
 		printf("dpio_enable() failed %d\n", err);
 		goto err_get_enable;
 	}
@@ -672,176 +730,512 @@ int dpio_init(struct dprc_obj_desc obj_desc)
 	return 0;
 
 err_get_swp_init:
+	dpio_disable(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dpio->dpio_handle);
 err_get_enable:
-	dpio_disable(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dpio_handle);
-err_get_attr:
-	dpio_close(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dpio_handle);
-err_open:
 	free(dflt_dpio);
+err_get_attr:
+	dpio_close(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dpio->dpio_handle);
+	dpio_destroy(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dpio->dpio_handle);
+err_create:
+err_malloc:
 	return err;
 }
 
-int dpbp_init(struct dprc_obj_desc obj_desc)
+static int dpio_exit(void)
 {
-	dflt_dpbp = (struct fsl_dpbp_obj *)malloc(sizeof(struct fsl_dpbp_obj));
-	if (!dflt_dpbp) {
+	int err;
+
+	err = dpio_disable(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dpio->dpio_handle);
+	if (err < 0) {
+		printf("dpio_disable() failed: %d\n", err);
+		goto err;
+	}
+
+	err = dpio_destroy(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dpio->dpio_handle);
+	if (err < 0) {
+		printf("dpio_destroy() failed: %d\n", err);
+		goto err;
+	}
+
+#ifdef DEBUG
+	printf("Exit: DPIO id=0x%d\n", dflt_dpio->dpio_id);
+#endif
+
+	if (dflt_dpio)
+		free(dflt_dpio);
+
+	return 0;
+err:
+	return err;
+}
+
+static int dprc_init(void)
+{
+	int err, child_portal_id, container_id;
+	struct dprc_cfg cfg;
+	uint64_t mc_portal_offset;
+
+	/* Open root container */
+	err = dprc_get_container_id(root_mc_io, MC_CMD_NO_FLAGS, &container_id);
+	if (err < 0) {
+		printf("dprc_get_container_id(): Root failed: %d\n", err);
+		goto err_root_container_id;
+	}
+
+#ifdef DEBUG
+	printf("Root container id = %d\n", container_id);
+#endif
+	err = dprc_open(root_mc_io, MC_CMD_NO_FLAGS, container_id,
+			&root_dprc_handle);
+	if (err < 0) {
+		printf("dprc_open(): Root Container failed: %d\n", err);
+		goto err_root_open;
+	}
+
+	if (!root_dprc_handle) {
+		printf("dprc_open(): Root Container Handle is not valid\n");
+		goto err_root_open;
+	}
+
+	cfg.options = DPRC_CFG_OPT_TOPOLOGY_CHANGES_ALLOWED |
+		      DPRC_CFG_OPT_OBJ_CREATE_ALLOWED |
+		      DPRC_CFG_OPT_ALLOC_ALLOWED;
+	cfg.icid = DPRC_GET_ICID_FROM_POOL;
+	cfg.portal_id = 250;
+	err = dprc_create_container(root_mc_io, MC_CMD_NO_FLAGS,
+			root_dprc_handle,
+			&cfg,
+			&child_dprc_id,
+			&mc_portal_offset);
+	if (err < 0) {
+		printf("dprc_create_container() failed: %d\n", err);
+		goto err_create;
+	}
+
+	dflt_mc_io = (struct fsl_mc_io *)malloc(sizeof(struct fsl_mc_io));
+	if (!dflt_mc_io) {
+		err  = -ENOMEM;
 		printf(" No memory: malloc() failed\n");
-		return -ENOMEM;
+		goto err_malloc;
+	}
+
+	child_portal_id = MC_PORTAL_OFFSET_TO_PORTAL_ID(mc_portal_offset);
+	dflt_mc_io->mmio_regs = SOC_MC_PORTAL_ADDR(child_portal_id);
+#ifdef DEBUG
+	printf("MC portal of child DPRC container: %d, physical addr %p)\n",
+	       child_dprc_id, dflt_mc_io->mmio_regs);
+#endif
+
+	err = dprc_open(dflt_mc_io, MC_CMD_NO_FLAGS, child_dprc_id,
+			&dflt_dprc_handle);
+	if (err < 0) {
+		printf("dprc_open(): Child container failed: %d\n", err);
+		goto err_child_open;
+	}
+
+	if (!dflt_dprc_handle) {
+		printf("dprc_open(): Child container Handle is not valid\n");
+		goto err_child_open;
 	}
-	dflt_dpbp->dpbp_attr.id = obj_desc.id;
 
 	return 0;
+err_child_open:
+	free(dflt_mc_io);
+err_malloc:
+	dprc_destroy_container(root_mc_io, MC_CMD_NO_FLAGS,
+			       root_dprc_handle, child_dprc_id);
+err_create:
+	dprc_close(root_mc_io, MC_CMD_NO_FLAGS, root_dprc_handle);
+err_root_open:
+err_root_container_id:
+	return err;
 }
 
-int dprc_init_container_obj(struct dprc_obj_desc obj_desc, uint16_t dprc_handle)
+static int dprc_exit(void)
 {
-	int error = 0, state = 0;
-	struct dprc_endpoint dpni_endpoint, dpmac_endpoint;
-	if (!strcmp(obj_desc.type, "dpbp")) {
-		if (!dflt_dpbp) {
-			error = dpbp_init(obj_desc);
-			if (error < 0)
-				printf("dpbp_init failed\n");
-		}
-	} else if (!strcmp(obj_desc.type, "dpio")) {
-		if (!dflt_dpio) {
-			error = dpio_init(obj_desc);
-			if (error < 0)
-				printf("dpio_init failed\n");
-		}
-	} else if (!strcmp(obj_desc.type, "dpni")) {
-		strcpy(dpni_endpoint.type, obj_desc.type);
-		dpni_endpoint.id = obj_desc.id;
-		error = dprc_get_connection(dflt_mc_io, MC_CMD_NO_FLAGS,
-					    dprc_handle, &dpni_endpoint,
-					    &dpmac_endpoint, &state);
-		if (!strcmp(dpmac_endpoint.type, "dpmac"))
-			error = ldpaa_eth_init(obj_desc);
-		if (error < 0)
-			printf("ldpaa_eth_init failed\n");
+	int err;
+
+	err = dprc_close(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dprc_handle);
+	if (err < 0) {
+		printf("dprc_close(): Child failed: %d\n", err);
+		goto err;
 	}
 
-	return error;
+	err = dprc_destroy_container(root_mc_io, MC_CMD_NO_FLAGS,
+				     root_dprc_handle, child_dprc_id);
+	if (err < 0) {
+		printf("dprc_destroy_container() failed: %d\n", err);
+		goto err;
+	}
+
+	err = dprc_close(root_mc_io, MC_CMD_NO_FLAGS, root_dprc_handle);
+	if (err < 0) {
+		printf("dprc_close(): Root failed: %d\n", err);
+		goto err;
+	}
+
+	if (dflt_mc_io)
+		free(dflt_mc_io);
+
+	if (root_mc_io)
+		free(root_mc_io);
+
+	return 0;
+
+err:
+	return err;
 }
 
-int dprc_scan_container_obj(uint16_t dprc_handle, char *obj_type, int i)
+static int dpbp_init(void)
 {
-	int error = 0;
-	struct dprc_obj_desc obj_desc;
+	int err;
+	struct dpbp_attr dpbp_attr;
+	struct dpbp_cfg dpbp_cfg;
 
-	memset((void *)&obj_desc, 0x00, sizeof(struct dprc_obj_desc));
+	dflt_dpbp = (struct fsl_dpbp_obj *)malloc(sizeof(struct fsl_dpbp_obj));
+	if (!dflt_dpbp) {
+		printf("No memory: malloc() failed\n");
+		err = -ENOMEM;
+		goto err_malloc;
+	}
 
-	error = dprc_get_obj(dflt_mc_io, MC_CMD_NO_FLAGS, dprc_handle,
-			     i, &obj_desc);
-	if (error < 0) {
-		printf("dprc_get_obj(i=%d) failed: %d\n",
-		       i, error);
-		return error;
+	dpbp_cfg.options = 512;
+
+	err = dpbp_create(dflt_mc_io, MC_CMD_NO_FLAGS, &dpbp_cfg,
+			  &dflt_dpbp->dpbp_handle);
+
+	if (err < 0) {
+		err = -ENODEV;
+		printf("dpbp_create() failed: %d\n", err);
+		goto err_create;
+	}
+
+	memset(&dpbp_attr, 0, sizeof(struct dpbp_attr));
+	err = dpbp_get_attributes(dflt_mc_io, MC_CMD_NO_FLAGS,
+				  dflt_dpbp->dpbp_handle,
+				  &dpbp_attr);
+	if (err < 0) {
+		printf("dpbp_get_attributes() failed: %d\n", err);
+		goto err_get_attr;
 	}
 
-	if (!strcmp(obj_desc.type, obj_type)) {
-		debug("Discovered object: type %s, id %d, req %s\n",
-		      obj_desc.type, obj_desc.id, obj_type);
+	dflt_dpbp->dpbp_attr.id = dpbp_attr.id;
+#ifdef DEBUG
+	printf("Init: DPBP id=0x%d\n", dflt_dpbp->dpbp_attr.id);
+#endif
 
-		error = dprc_init_container_obj(obj_desc, dprc_handle);
-		if (error < 0) {
-			printf("dprc_init_container_obj(i=%d) failed: %d\n",
-			       i, error);
-			return error;
-		}
+	err = dpbp_close(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dpbp->dpbp_handle);
+	if (err < 0) {
+		printf("dpbp_close() failed: %d\n", err);
+		goto err_close;
 	}
 
-	return error;
+	return 0;
+
+err_close:
+	free(dflt_dpbp);
+err_get_attr:
+	dpbp_close(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dpbp->dpbp_handle);
+	dpbp_destroy(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dpbp->dpbp_handle);
+err_create:
+err_malloc:
+	return err;
 }
 
-int fsl_mc_ldpaa_init(bd_t *bis)
+static int dpbp_exit(void)
 {
-	int i, error = 0;
-	int dprc_opened = 0, container_id;
-	int num_child_objects = 0;
+	int err;
 
-	error = mc_init();
-	if (error < 0)
-		goto error;
+	err = dpbp_open(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dpbp->dpbp_attr.id,
+			&dflt_dpbp->dpbp_handle);
+	if (err < 0) {
+		printf("dpbp_open() failed: %d\n", err);
+		goto err;
+	}
 
-	error = dprc_get_container_id(dflt_mc_io, MC_CMD_NO_FLAGS,
-				      &container_id);
-	if (error < 0) {
-		printf("dprc_get_container_id() failed: %d\n", error);
-		goto error;
+	err = dpbp_destroy(dflt_mc_io, MC_CMD_NO_FLAGS,
+			   dflt_dpbp->dpbp_handle);
+	if (err < 0) {
+		printf("dpbp_destroy() failed: %d\n", err);
+		goto err;
 	}
 
-	debug("fsl-mc: Container id=0x%x\n", container_id);
+#ifdef DEBUG
+	printf("Exit: DPBP id=0x%d\n", dflt_dpbp->dpbp_attr.id);
+#endif
+
+	if (dflt_dpbp)
+		free(dflt_dpbp);
+	return 0;
 
-	error = dprc_open(dflt_mc_io, MC_CMD_NO_FLAGS, container_id,
-			  &dflt_dprc_handle);
-	if (error < 0) {
-		printf("dprc_open() failed: %d\n", error);
-		goto error;
+err:
+	return err;
+}
+
+static int dpni_init(void)
+{
+	int err;
+	struct dpni_attr dpni_attr;
+	struct dpni_cfg dpni_cfg;
+
+	dflt_dpni = (struct fsl_dpni_obj *)malloc(sizeof(struct fsl_dpni_obj));
+	if (!dflt_dpni) {
+		printf("No memory: malloc() failed\n");
+		err = -ENOMEM;
+		goto err_malloc;
 	}
-	dprc_opened = true;
 
-	error = dprc_get_obj_count(dflt_mc_io,
-				   MC_CMD_NO_FLAGS, dflt_dprc_handle,
-				   &num_child_objects);
-	if (error < 0) {
-		printf("dprc_get_obj_count() failed: %d\n", error);
-		goto error;
+	memset(&dpni_cfg, 0, sizeof(dpni_cfg));
+	dpni_cfg.adv.options = DPNI_OPT_UNICAST_FILTER |
+			       DPNI_OPT_MULTICAST_FILTER;
+
+	err = dpni_create(dflt_mc_io, MC_CMD_NO_FLAGS, &dpni_cfg,
+			  &dflt_dpni->dpni_handle);
+
+	if (err < 0) {
+		err = -ENODEV;
+		printf("dpni_create() failed: %d\n", err);
+		goto err_create;
 	}
-	debug("Total child in container %d = %d\n", container_id,
-	      num_child_objects);
 
-	if (num_child_objects != 0) {
-		/*
-		 * Discover objects currently in the DPRC container in the MC:
-		 */
-		for (i = 0; i < num_child_objects; i++)
-			error = dprc_scan_container_obj(dflt_dprc_handle,
-							"dpbp", i);
+	memset(&dpni_attr, 0, sizeof(struct dpni_attr));
+	err = dpni_get_attributes(dflt_mc_io, MC_CMD_NO_FLAGS,
+				  dflt_dpni->dpni_handle,
+				  &dpni_attr);
+	if (err < 0) {
+		printf("dpni_get_attributes() failed: %d\n", err);
+		goto err_get_attr;
+	}
 
-		for (i = 0; i < num_child_objects; i++)
-			error = dprc_scan_container_obj(dflt_dprc_handle,
-							"dpio", i);
+	dflt_dpni->dpni_id = dpni_attr.id;
+#ifdef DEBUG
+	printf("Init: DPNI id=0x%d\n", dflt_dpni->dpni_id);
+#endif
 
-		for (i = 0; i < num_child_objects; i++)
-			error = dprc_scan_container_obj(dflt_dprc_handle,
-							"dpni", i);
+	err = dpni_close(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dpni->dpni_handle);
+	if (err < 0) {
+		printf("dpni_close() failed: %d\n", err);
+		goto err_close;
 	}
-error:
-	if (dprc_opened)
-		dprc_close(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dprc_handle);
 
-	return error;
+	return 0;
+
+err_close:
+	free(dflt_dpni);
+err_get_attr:
+	dpni_close(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dpni->dpni_handle);
+	dpni_destroy(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dpni->dpni_handle);
+err_create:
+err_malloc:
+	return err;
 }
 
-void fsl_mc_ldpaa_exit(bd_t *bis)
+static int dpni_exit(void)
 {
 	int err;
 
-	if (get_mc_boot_status() == 0) {
-		err = dpio_disable(dflt_mc_io, MC_CMD_NO_FLAGS,
-				   dflt_dpio_handle);
-		if (err < 0) {
-			printf("dpio_disable() failed: %d\n", err);
-			return;
-		}
-		err = dpio_reset(dflt_mc_io, MC_CMD_NO_FLAGS,
-				 dflt_dpio_handle);
-		if (err < 0) {
-			printf("dpio_reset() failed: %d\n", err);
-			return;
-		}
-		err = dpio_close(dflt_mc_io, MC_CMD_NO_FLAGS,
-				 dflt_dpio_handle);
-		if (err < 0) {
-			printf("dpio_close() failed: %d\n", err);
-			return;
-		}
+	err = dpni_open(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dpni->dpni_id,
+			&dflt_dpni->dpni_handle);
+	if (err < 0) {
+		printf("dpni_open() failed: %d\n", err);
+		goto err;
+	}
 
-		free(dflt_dpio);
-		free(dflt_dpbp);
+	err = dpni_destroy(dflt_mc_io, MC_CMD_NO_FLAGS,
+			   dflt_dpni->dpni_handle);
+	if (err < 0) {
+		printf("dpni_destroy() failed: %d\n", err);
+		goto err;
 	}
 
-	if (dflt_mc_io)
-		free(dflt_mc_io);
+#ifdef DEBUG
+	printf("Exit: DPNI id=0x%d\n", dflt_dpni->dpni_id);
+#endif
+
+	if (dflt_dpni)
+		free(dflt_dpni);
+	return 0;
+
+err:
+	return err;
+}
+
+static int mc_init_object(void)
+{
+	int err = 0;
+
+	err = dprc_init();
+	if (err < 0) {
+		printf("dprc_init() failed: %d\n", err);
+		goto err;
+	}
+
+	err = dpbp_init();
+	if (err < 0) {
+		printf("dpbp_init() failed: %d\n", err);
+		goto err;
+	}
+
+	err = dpio_init();
+	if (err < 0) {
+		printf("dpio_init() failed: %d\n", err);
+		goto err;
+	}
+
+	err = dpni_init();
+	if (err < 0) {
+		printf("dpni_init() failed: %d\n", err);
+		goto err;
+	}
+
+	return 0;
+err:
+	return err;
 }
+
+int fsl_mc_ldpaa_exit(bd_t *bd)
+{
+	int err = 0;
+
+	if (bd && get_mc_boot_status() == -1)
+		return 0;
+
+	if (bd && !get_mc_boot_status() && get_dpl_apply_status() == -1) {
+		printf("ERROR: fsl-mc: DPL is not applied\n");
+		err = -ENODEV;
+		return err;
+	}
+
+	if (bd && !get_mc_boot_status() && !get_dpl_apply_status())
+		return err;
+
+	err = dpbp_exit();
+	if (err < 0) {
+		printf("dpni_exit() failed: %d\n", err);
+		goto err;
+	}
+
+	err = dpio_exit();
+	if (err < 0) {
+		printf("dpio_exit() failed: %d\n", err);
+		goto err;
+	}
+
+	err = dpni_exit();
+	if (err < 0) {
+		printf("dpni_exit() failed: %d\n", err);
+		goto err;
+	}
+
+	err = dprc_exit();
+	if (err < 0) {
+		printf("dprc_exit() failed: %d\n", err);
+		goto err;
+	}
+
+	return 0;
+err:
+	return err;
+}
+
+static int do_fsl_mc(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	int err = 0;
+	if (argc < 3)
+		goto usage;
+
+	switch (argv[1][0]) {
+	case 's': {
+			char sub_cmd;
+			u64 mc_fw_addr, mc_dpc_addr;
+#ifdef CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET
+			u64 aiop_fw_addr;
+#endif
+
+			sub_cmd = argv[2][0];
+			switch (sub_cmd) {
+			case 'm':
+				if (argc < 5)
+					goto usage;
+
+				if (get_mc_boot_status() == 0) {
+					printf("fsl-mc: MC is already booted");
+					printf("\n");
+					return err;
+				}
+				mc_fw_addr = simple_strtoull(argv[3], NULL, 16);
+				mc_dpc_addr = simple_strtoull(argv[4], NULL,
+							      16);
+
+				if (!mc_init(mc_fw_addr, mc_dpc_addr))
+					err = mc_init_object();
+				break;
+
+#ifdef CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET
+			case 'a':
+				if (argc < 4)
+					goto usage;
+				if (get_aiop_apply_status() == 0) {
+					printf("fsl-mc: AIOP FW is already");
+					printf(" applied\n");
+					return err;
+				}
+
+				aiop_fw_addr = simple_strtoull(argv[3], NULL,
+							       16);
+
+				err = load_mc_aiop_img(aiop_fw_addr);
+				if (!err)
+					printf("fsl-mc: AIOP FW applied\n");
+				break;
+#endif
+			default:
+				printf("Invalid option: %s\n", argv[2]);
+				goto usage;
+
+				break;
+			}
+		}
+		break;
+
+	case 'a': {
+			u64 mc_dpl_addr;
+
+			if (argc < 4)
+				goto usage;
+
+			if (get_dpl_apply_status() == 0) {
+				printf("fsl-mc: DPL already applied\n");
+				return err;
+			}
+
+			mc_dpl_addr = simple_strtoull(argv[3], NULL,
+							      16);
+
+			if (get_mc_boot_status() != 0) {
+				printf("fsl-mc: Deploying data path layout ..");
+				printf("ERROR (MC is not booted)\n");
+				return -ENODEV;
+			}
+
+			if (!fsl_mc_ldpaa_exit(NULL))
+				err = mc_apply_dpl(mc_dpl_addr);
+			break;
+		}
+	default:
+		printf("Invalid option: %s\n", argv[1]);
+		goto usage;
+		break;
+	}
+	return err;
+ usage:
+	return CMD_RET_USAGE;
+}
+
+U_BOOT_CMD(
+	fsl_mc,  CONFIG_SYS_MAXARGS,  1,   do_fsl_mc,
+	"DPAA2 command to manage Management Complex (MC)",
+	"start mc [FW_addr] [DPC_addr] - Start Management Complex\n"
+	"fsl_mc apply DPL [DPL_addr] - Apply DPL file\n"
+	"fsl_mc start aiop [FW_addr] - Start AIOP\n"
+);
diff --git a/drivers/net/fsl-mc/mc_sys.c b/drivers/net/fsl-mc/mc_sys.c
index 2136670..71e1456 100644
--- a/drivers/net/fsl-mc/mc_sys.c
+++ b/drivers/net/fsl-mc/mc_sys.c
@@ -32,7 +32,7 @@ int mc_send_command(struct fsl_mc_io *mc_io,
 		    struct mc_command *cmd)
 {
 	enum mc_cmd_status status;
-	int timeout = 6000;
+	int timeout = 12000;
 
 	mc_write_command(mc_io->mmio_regs, cmd);
 
diff --git a/drivers/net/ldpaa_eth/Makefile b/drivers/net/ldpaa_eth/Makefile
index c37633f..74c4916 100644
--- a/drivers/net/ldpaa_eth/Makefile
+++ b/drivers/net/ldpaa_eth/Makefile
@@ -6,4 +6,5 @@
 
 obj-y += ldpaa_wriop.o
 obj-y += ldpaa_eth.o
-obj-$(CONFIG_LS2085A) += ls2085a.o
+obj-$(CONFIG_LS2080A) += ls2080a.o
+obj-$(CONFIG_LS2085A) += ls2080a.o
diff --git a/drivers/net/ldpaa_eth/ldpaa_eth.c b/drivers/net/ldpaa_eth/ldpaa_eth.c
index 99acb7a..69530b1 100644
--- a/drivers/net/ldpaa_eth/ldpaa_eth.c
+++ b/drivers/net/ldpaa_eth/ldpaa_eth.c
@@ -12,6 +12,7 @@
 #include <hwconfig.h>
 #include <phy.h>
 #include <linux/compat.h>
+#include <fsl-mc/fsl_dpmac.h>
 
 #include "ldpaa_eth.h"
 
@@ -23,6 +24,84 @@ static int init_phy(struct eth_device *dev)
 	return 0;
 }
 
+#ifdef DEBUG
+static void ldpaa_eth_get_dpni_counter(void)
+{
+	int err = 0;
+	u64 value;
+
+	err = dpni_get_counter(dflt_mc_io, MC_CMD_NO_FLAGS,
+		     dflt_dpni->dpni_handle,
+		     DPNI_CNT_ING_FRAME,
+		     &value);
+	if (err < 0) {
+		printf("dpni_get_counter: DPNI_CNT_ING_FRAME failed\n");
+		return;
+	}
+	printf("DPNI_CNT_ING_FRAME=%lld\n", value);
+
+	err = dpni_get_counter(dflt_mc_io, MC_CMD_NO_FLAGS,
+		     dflt_dpni->dpni_handle,
+		     DPNI_CNT_ING_BYTE,
+		     &value);
+	if (err < 0) {
+		printf("dpni_get_counter: DPNI_CNT_ING_BYTE failed\n");
+		return;
+	}
+	printf("DPNI_CNT_ING_BYTE=%lld\n", value);
+
+	err = dpni_get_counter(dflt_mc_io, MC_CMD_NO_FLAGS,
+		     dflt_dpni->dpni_handle,
+		     DPNI_CNT_ING_FRAME_DROP ,
+		     &value);
+	if (err < 0) {
+		printf("dpni_get_counter: DPNI_CNT_ING_FRAME_DROP failed\n");
+		return;
+	}
+	printf("DPNI_CNT_ING_FRAME_DROP =%lld\n", value);
+
+	err = dpni_get_counter(dflt_mc_io, MC_CMD_NO_FLAGS,
+		     dflt_dpni->dpni_handle,
+		     DPNI_CNT_ING_FRAME_DISCARD,
+		     &value);
+	if (err < 0) {
+		printf("dpni_get_counter: DPNI_CNT_ING_FRAME_DISCARD failed\n");
+		return;
+	}
+	printf("DPNI_CNT_ING_FRAME_DISCARD=%lld\n", value);
+
+	err = dpni_get_counter(dflt_mc_io, MC_CMD_NO_FLAGS,
+		     dflt_dpni->dpni_handle,
+		     DPNI_CNT_EGR_FRAME,
+		     &value);
+	if (err < 0) {
+		printf("dpni_get_counter: DPNI_CNT_EGR_FRAME failed\n");
+		return;
+	}
+	printf("DPNI_CNT_EGR_FRAME=%lld\n", value);
+
+	err = dpni_get_counter(dflt_mc_io, MC_CMD_NO_FLAGS,
+		     dflt_dpni->dpni_handle,
+		     DPNI_CNT_EGR_BYTE ,
+		     &value);
+	if (err < 0) {
+		printf("dpni_get_counter: DPNI_CNT_EGR_BYTE failed\n");
+		return;
+	}
+	printf("DPNI_CNT_EGR_BYTE =%lld\n", value);
+
+	err = dpni_get_counter(dflt_mc_io, MC_CMD_NO_FLAGS,
+		     dflt_dpni->dpni_handle,
+		     DPNI_CNT_EGR_FRAME_DISCARD ,
+		     &value);
+	if (err < 0) {
+		printf("dpni_get_counter: DPNI_CNT_EGR_FRAME_DISCARD failed\n");
+		return;
+	}
+	printf("DPNI_CNT_EGR_FRAME_DISCARD =%lld\n", value);
+}
+#endif
+
 static void ldpaa_eth_rx(struct ldpaa_eth_priv *priv,
 			 const struct dpaa_fd *fd)
 {
@@ -46,7 +125,7 @@ static void ldpaa_eth_rx(struct ldpaa_eth_priv *priv,
 		/* Read the frame annotation status word and check for errors */
 		fas = (struct ldpaa_fas *)
 				((uint8_t *)(fd_addr) +
-				priv->buf_layout.private_data_size);
+				dflt_dpni->buf_layout.private_data_size);
 		status = le32_to_cpu(fas->status);
 		if (status & LDPAA_ETH_RX_ERR_MASK) {
 			printf("Rx frame error(s): 0x%08x\n",
@@ -220,11 +299,34 @@ static int ldpaa_eth_open(struct eth_device *net_dev, bd_t *bd)
 {
 	struct ldpaa_eth_priv *priv = (struct ldpaa_eth_priv *)net_dev->priv;
 	struct dpni_queue_attr rx_queue_attr;
+	struct dpmac_link_state	dpmac_link_state = { 0 };
+#ifdef DEBUG
+	struct dpni_link_state link_state;
+#endif
 	int err;
 
 	if (net_dev->state == ETH_STATE_ACTIVE)
 		return 0;
 
+	if (get_mc_boot_status() != 0) {
+		printf("ERROR (MC is not booted)\n");
+		return -ENODEV;
+	}
+
+	if (get_dpl_apply_status() == 0) {
+		printf("ERROR (DPL is deployed. No device available)\n");
+		return -ENODEV;
+	}
+	/* DPMAC initialization */
+	err = ldpaa_dpmac_setup(priv);
+	if (err < 0)
+		goto err_dpmac_setup;
+
+	/* DPMAC binding DPNI */
+	err = ldpaa_dpmac_bind(priv);
+	if (err)
+		goto err_dpamc_bind;
+
 	/* DPNI initialization */
 	err = ldpaa_dpni_setup(priv);
 	if (err < 0)
@@ -237,10 +339,10 @@ static int ldpaa_eth_open(struct eth_device *net_dev, bd_t *bd)
 	/* DPNI binding DPBP */
 	err = ldpaa_dpni_bind(priv);
 	if (err)
-		goto err_bind;
+		goto err_dpni_bind;
 
 	err = dpni_add_mac_addr(dflt_mc_io, MC_CMD_NO_FLAGS,
-				priv->dpni_handle, net_dev->enetaddr);
+				dflt_dpni->dpni_handle, net_dev->enetaddr);
 	if (err) {
 		printf("dpni_add_mac_addr() failed\n");
 		return err;
@@ -259,15 +361,38 @@ static int ldpaa_eth_open(struct eth_device *net_dev, bd_t *bd)
 	priv->phydev->duplex = DUPLEX_FULL;
 #endif
 
-	err = dpni_enable(dflt_mc_io, MC_CMD_NO_FLAGS, priv->dpni_handle);
+	err = dpni_enable(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dpni->dpni_handle);
 	if (err < 0) {
 		printf("dpni_enable() failed\n");
 		return err;
 	}
 
+	dpmac_link_state.rate = SPEED_1000;
+	dpmac_link_state.options = DPMAC_LINK_OPT_AUTONEG;
+	dpmac_link_state.up = 1;
+	err = dpmac_set_link_state(dflt_mc_io, MC_CMD_NO_FLAGS,
+				  priv->dpmac_handle, &dpmac_link_state);
+	if (err < 0) {
+		printf("dpmac_set_link_state() failed\n");
+		return err;
+	}
+
+#ifdef DEBUG
+	err = dpni_get_link_state(dflt_mc_io, MC_CMD_NO_FLAGS,
+				  dflt_dpni->dpni_handle, &link_state);
+	if (err < 0) {
+		printf("dpni_get_link_state() failed\n");
+		return err;
+	}
+
+	printf("link status: %d - ", link_state.up);
+	link_state.up == 0 ? printf("down\n") :
+	link_state.up == 1 ? printf("up\n") : printf("error state\n");
+#endif
+
 	/* TODO: support multiple Rx flows */
-	err = dpni_get_rx_flow(dflt_mc_io, MC_CMD_NO_FLAGS, priv->dpni_handle,
-			       0, 0, &rx_queue_attr);
+	err = dpni_get_rx_flow(dflt_mc_io, MC_CMD_NO_FLAGS,
+			       dflt_dpni->dpni_handle, 0, 0, &rx_queue_attr);
 	if (err) {
 		printf("dpni_get_rx_flow() failed\n");
 		goto err_rx_flow;
@@ -275,7 +400,7 @@ static int ldpaa_eth_open(struct eth_device *net_dev, bd_t *bd)
 
 	priv->rx_dflt_fqid = rx_queue_attr.fqid;
 
-	err = dpni_get_qdid(dflt_mc_io, MC_CMD_NO_FLAGS, priv->dpni_handle,
+	err = dpni_get_qdid(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dpni->dpni_handle,
 			    &priv->tx_qdid);
 	if (err) {
 		printf("dpni_get_qdid() failed\n");
@@ -289,12 +414,14 @@ static int ldpaa_eth_open(struct eth_device *net_dev, bd_t *bd)
 
 err_qdid:
 err_rx_flow:
-	dpni_disable(dflt_mc_io, MC_CMD_NO_FLAGS, priv->dpni_handle);
-err_bind:
+	dpni_disable(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dpni->dpni_handle);
+err_dpni_bind:
 	ldpaa_dpbp_free();
 err_dpbp_setup:
-	dpni_close(dflt_mc_io, MC_CMD_NO_FLAGS, priv->dpni_handle);
+err_dpamc_bind:
+	dpni_close(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dpni->dpni_handle);
 err_dpni_setup:
+err_dpmac_setup:
 	return err;
 }
 
@@ -306,8 +433,22 @@ static void ldpaa_eth_stop(struct eth_device *net_dev)
 	if ((net_dev->state == ETH_STATE_PASSIVE) ||
 	    (net_dev->state == ETH_STATE_INIT))
 		return;
+
+#ifdef DEBUG
+	ldpaa_eth_get_dpni_counter();
+#endif
+
+	err = dprc_disconnect(dflt_mc_io, MC_CMD_NO_FLAGS,
+			      dflt_dprc_handle, &dpmac_endpoint);
+	if (err < 0)
+		printf("dprc_disconnect() failed dpmac_endpoint\n");
+
+	err = dpmac_destroy(dflt_mc_io, MC_CMD_NO_FLAGS, priv->dpmac_handle);
+	if (err < 0)
+		printf("dpmac_destroy() failed\n");
+
 	/* Stop Tx and Rx traffic */
-	err = dpni_disable(dflt_mc_io, MC_CMD_NO_FLAGS, priv->dpni_handle);
+	err = dpni_disable(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dpni->dpni_handle);
 	if (err < 0)
 		printf("dpni_disable() failed\n");
 
@@ -316,8 +457,8 @@ static void ldpaa_eth_stop(struct eth_device *net_dev)
 #endif
 
 	ldpaa_dpbp_free();
-	dpni_reset(dflt_mc_io, MC_CMD_NO_FLAGS, priv->dpni_handle);
-	dpni_close(dflt_mc_io, MC_CMD_NO_FLAGS, priv->dpni_handle);
+	dpni_reset(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dpni->dpni_handle);
+	dpni_close(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dpni->dpni_handle);
 }
 
 static void ldpaa_dpbp_drain_cnt(int count)
@@ -359,7 +500,7 @@ static int ldpaa_bp_add_7(uint16_t bpid)
 	struct qbman_release_desc rd;
 
 	for (i = 0; i < 7; i++) {
-		addr = memalign(L1_CACHE_BYTES, LDPAA_ETH_RX_BUFFER_SIZE);
+		addr = memalign(LDPAA_ETH_BUF_ALIGN, LDPAA_ETH_RX_BUFFER_SIZE);
 		if (!addr) {
 			printf("addr allocation failed\n");
 			goto err_alloc;
@@ -458,54 +599,125 @@ static void ldpaa_dpbp_free(void)
 	dpbp_close(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dpbp->dpbp_handle);
 }
 
+static int ldpaa_dpmac_setup(struct ldpaa_eth_priv *priv)
+{
+	int err = 0;
+	struct dpmac_cfg dpmac_cfg;
+
+	dpmac_cfg.mac_id = priv->dpmac_id;
+	err = dpmac_create(dflt_mc_io, MC_CMD_NO_FLAGS, &dpmac_cfg,
+			  &priv->dpmac_handle);
+	if (err)
+		printf("dpmac_create() failed\n");
+	return err;
+}
+
+static int ldpaa_dpmac_bind(struct ldpaa_eth_priv *priv)
+{
+	int err = 0;
+	struct dprc_connection_cfg dprc_connection_cfg = {
+		/* If both rates are zero the connection */
+		/* will be configured in "best effort" mode. */
+		.committed_rate = 0,
+		.max_rate = 0
+	};
+
+#ifdef DEBUG
+	struct dprc_endpoint dbg_endpoint;
+	int state = 0;
+#endif
+
+	memset(&dpmac_endpoint, 0, sizeof(struct dprc_endpoint));
+	sprintf(dpmac_endpoint.type, "dpmac");
+	dpmac_endpoint.id = priv->dpmac_id;
+
+	memset(&dpni_endpoint, 0, sizeof(struct dprc_endpoint));
+	sprintf(dpni_endpoint.type, "dpni");
+	dpni_endpoint.id = dflt_dpni->dpni_id;
+
+	err = dprc_connect(dflt_mc_io, MC_CMD_NO_FLAGS,
+			     dflt_dprc_handle,
+			     &dpmac_endpoint,
+			     &dpni_endpoint,
+			     &dprc_connection_cfg);
+	if (err)
+		printf("dprc_connect() failed\n");
+
+#ifdef DEBUG
+	err = dprc_get_connection(dflt_mc_io, MC_CMD_NO_FLAGS,
+				    dflt_dprc_handle, &dpni_endpoint,
+				    &dbg_endpoint, &state);
+	printf("%s, DPMAC Type= %s\n", __func__, dbg_endpoint.type);
+	printf("%s, DPMAC ID= %d\n", __func__, dbg_endpoint.id);
+	printf("%s, DPMAC State= %d\n", __func__, state);
+
+	memset(&dbg_endpoint, 0, sizeof(struct dprc_endpoint));
+	err = dprc_get_connection(dflt_mc_io, MC_CMD_NO_FLAGS,
+				    dflt_dprc_handle, &dpmac_endpoint,
+				    &dbg_endpoint, &state);
+	printf("%s, DPNI Type= %s\n", __func__, dbg_endpoint.type);
+	printf("%s, DPNI ID= %d\n", __func__, dbg_endpoint.id);
+	printf("%s, DPNI State= %d\n", __func__, state);
+#endif
+	return err;
+}
+
 static int ldpaa_dpni_setup(struct ldpaa_eth_priv *priv)
 {
 	int err;
 
 	/* and get a handle for the DPNI this interface is associate with */
-	err = dpni_open(dflt_mc_io, MC_CMD_NO_FLAGS, priv->dpni_id,
-			&priv->dpni_handle);
+	err = dpni_open(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dpni->dpni_id,
+			&dflt_dpni->dpni_handle);
 	if (err) {
 		printf("dpni_open() failed\n");
 		goto err_open;
 	}
 
 	err = dpni_get_attributes(dflt_mc_io, MC_CMD_NO_FLAGS,
-				  priv->dpni_handle, &priv->dpni_attrs);
+				  dflt_dpni->dpni_handle,
+				  &dflt_dpni->dpni_attrs);
 	if (err) {
 		printf("dpni_get_attributes() failed (err=%d)\n", err);
 		goto err_get_attr;
 	}
 
 	/* Configure our buffers' layout */
-	priv->buf_layout.options = DPNI_BUF_LAYOUT_OPT_PARSER_RESULT |
+	dflt_dpni->buf_layout.options = DPNI_BUF_LAYOUT_OPT_PARSER_RESULT |
 				   DPNI_BUF_LAYOUT_OPT_FRAME_STATUS |
-				   DPNI_BUF_LAYOUT_OPT_PRIVATE_DATA_SIZE;
-	priv->buf_layout.pass_parser_result = true;
-	priv->buf_layout.pass_frame_status = true;
-	priv->buf_layout.private_data_size = LDPAA_ETH_SWA_SIZE;
+				   DPNI_BUF_LAYOUT_OPT_PRIVATE_DATA_SIZE |
+				   DPNI_BUF_LAYOUT_OPT_DATA_ALIGN;
+	dflt_dpni->buf_layout.pass_parser_result = true;
+	dflt_dpni->buf_layout.pass_frame_status = true;
+	dflt_dpni->buf_layout.private_data_size = LDPAA_ETH_SWA_SIZE;
+	/* HW erratum mandates data alignment in multiples of 256 */
+	dflt_dpni->buf_layout.data_align = LDPAA_ETH_BUF_ALIGN;
 	/* ...rx, ... */
 	err = dpni_set_rx_buffer_layout(dflt_mc_io, MC_CMD_NO_FLAGS,
-					priv->dpni_handle, &priv->buf_layout);
+					dflt_dpni->dpni_handle,
+					&dflt_dpni->buf_layout);
 	if (err) {
 		printf("dpni_set_rx_buffer_layout() failed");
 		goto err_buf_layout;
 	}
 
 	/* ... tx, ... */
-	priv->buf_layout.options &= ~DPNI_BUF_LAYOUT_OPT_PARSER_RESULT;
+	/* remove Rx-only options */
+	dflt_dpni->buf_layout.options &= ~(DPNI_BUF_LAYOUT_OPT_DATA_ALIGN |
+				      DPNI_BUF_LAYOUT_OPT_PARSER_RESULT);
 	err = dpni_set_tx_buffer_layout(dflt_mc_io, MC_CMD_NO_FLAGS,
-					priv->dpni_handle, &priv->buf_layout);
+					dflt_dpni->dpni_handle,
+					&dflt_dpni->buf_layout);
 	if (err) {
 		printf("dpni_set_tx_buffer_layout() failed");
 		goto err_buf_layout;
 	}
 
 	/* ... tx-confirm. */
-	priv->buf_layout.options &= ~DPNI_BUF_LAYOUT_OPT_PRIVATE_DATA_SIZE;
+	dflt_dpni->buf_layout.options &= ~DPNI_BUF_LAYOUT_OPT_PRIVATE_DATA_SIZE;
 	err = dpni_set_tx_conf_buffer_layout(dflt_mc_io, MC_CMD_NO_FLAGS,
-					     priv->dpni_handle,
-					     &priv->buf_layout);
+					     dflt_dpni->dpni_handle,
+					     &dflt_dpni->buf_layout);
 	if (err) {
 		printf("dpni_set_tx_conf_buffer_layout() failed");
 		goto err_buf_layout;
@@ -515,7 +727,8 @@ static int ldpaa_dpni_setup(struct ldpaa_eth_priv *priv)
 	 * required tx data offset.
 	 */
 	err = dpni_get_tx_data_offset(dflt_mc_io, MC_CMD_NO_FLAGS,
-				      priv->dpni_handle, &priv->tx_data_offset);
+				      dflt_dpni->dpni_handle,
+				      &priv->tx_data_offset);
 	if (err) {
 		printf("dpni_get_tx_data_offset() failed\n");
 		goto err_data_offset;
@@ -533,7 +746,7 @@ static int ldpaa_dpni_setup(struct ldpaa_eth_priv *priv)
 err_data_offset:
 err_buf_layout:
 err_get_attr:
-	dpni_close(dflt_mc_io, MC_CMD_NO_FLAGS, priv->dpni_handle);
+	dpni_close(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dpni->dpni_handle);
 err_open:
 	return err;
 }
@@ -547,8 +760,8 @@ static int ldpaa_dpni_bind(struct ldpaa_eth_priv *priv)
 	pools_params.num_dpbp = 1;
 	pools_params.pools[0].dpbp_id = (uint16_t)dflt_dpbp->dpbp_attr.id;
 	pools_params.pools[0].buffer_size = LDPAA_ETH_RX_BUFFER_SIZE;
-	err = dpni_set_pools(dflt_mc_io, MC_CMD_NO_FLAGS, priv->dpni_handle,
-			     &pools_params);
+	err = dpni_set_pools(dflt_mc_io, MC_CMD_NO_FLAGS,
+			     dflt_dpni->dpni_handle, &pools_params);
 	if (err) {
 		printf("dpni_set_pools() failed\n");
 		return err;
@@ -560,8 +773,9 @@ static int ldpaa_dpni_bind(struct ldpaa_eth_priv *priv)
 	dflt_tx_flow.options = DPNI_TX_FLOW_OPT_ONLY_TX_ERROR;
 	dflt_tx_flow.conf_err_cfg.use_default_queue = 0;
 	dflt_tx_flow.conf_err_cfg.errors_only = 1;
-	err = dpni_set_tx_flow(dflt_mc_io, MC_CMD_NO_FLAGS, priv->dpni_handle,
-			       &priv->tx_flow_id, &dflt_tx_flow);
+	err = dpni_set_tx_flow(dflt_mc_io, MC_CMD_NO_FLAGS,
+			       dflt_dpni->dpni_handle, &priv->tx_flow_id,
+			       &dflt_tx_flow);
 	if (err) {
 		printf("dpni_set_tx_flow() failed\n");
 		return err;
@@ -570,12 +784,14 @@ static int ldpaa_dpni_bind(struct ldpaa_eth_priv *priv)
 	return 0;
 }
 
-static int ldpaa_eth_netdev_init(struct eth_device *net_dev)
+static int ldpaa_eth_netdev_init(struct eth_device *net_dev,
+				 phy_interface_t enet_if)
 {
 	int err;
 	struct ldpaa_eth_priv *priv = (struct ldpaa_eth_priv *)net_dev->priv;
 
-	sprintf(net_dev->name, "DPNI%d", priv->dpni_id);
+	sprintf(net_dev->name, "DPMAC%d@%s", priv->dpmac_id,
+		phy_interface_strings[enet_if]);
 
 	net_dev->iobase = 0;
 	net_dev->init = ldpaa_eth_open;
@@ -601,7 +817,7 @@ static int ldpaa_eth_netdev_init(struct eth_device *net_dev)
 	return 0;
 }
 
-int ldpaa_eth_init(struct dprc_obj_desc obj_desc)
+int ldpaa_eth_init(int dpmac_id, phy_interface_t enet_if)
 {
 	struct eth_device		*net_dev = NULL;
 	struct ldpaa_eth_priv		*priv = NULL;
@@ -626,9 +842,10 @@ int ldpaa_eth_init(struct dprc_obj_desc obj_desc)
 
 	net_dev->priv = (void *)priv;
 	priv->net_dev = (struct eth_device *)net_dev;
-	priv->dpni_id = obj_desc.id;
+	priv->dpmac_id = dpmac_id;
+	debug("%s dpmac_id=%d\n", __func__, dpmac_id);
 
-	err = ldpaa_eth_netdev_init(net_dev);
+	err = ldpaa_eth_netdev_init(net_dev, enet_if);
 	if (err)
 		goto err_netdev_init;
 
diff --git a/drivers/net/ldpaa_eth/ldpaa_eth.h b/drivers/net/ldpaa_eth/ldpaa_eth.h
index b4ef700..af41b27 100644
--- a/drivers/net/ldpaa_eth/ldpaa_eth.h
+++ b/drivers/net/ldpaa_eth/ldpaa_eth.h
@@ -28,10 +28,10 @@ enum ldpaa_eth_type {
 #define LDPAA_ETH_REFILL_THRESH		(LDPAA_ETH_NUM_BUFS/2)
 #define LDPAA_ETH_RX_BUFFER_SIZE	2048
 
-/* Hardware requires alignment for ingress/egress buffer addresses
- * and ingress buffer lengths.
+/* Hardware requires alignment for buffer address and length: 256-byte
+ * for ingress, 64-byte for egress. Using 256 for both.
  */
-#define LDPAA_ETH_BUF_ALIGN		64
+#define LDPAA_ETH_BUF_ALIGN		256
 
 /* So far we're only accomodating a skb backpointer in the frame's
  * software annotation, but the hardware options are either 0 or 64.
@@ -117,13 +117,9 @@ struct ldpaa_fas {
 
 struct ldpaa_eth_priv {
 	struct eth_device *net_dev;
-	int dpni_id;
-	uint16_t dpni_handle;
-	struct dpni_attr dpni_attrs;
-	/* Insofar as the MC is concerned, we're using one layout on all 3 types
-	 * of buffers (Rx, Tx, Tx-Conf).
-	 */
-	struct dpni_buffer_layout buf_layout;
+	int dpmac_id;
+	uint16_t dpmac_handle;
+
 	uint16_t tx_data_offset;
 
 	uint32_t rx_dflt_fqid;
@@ -134,9 +130,14 @@ struct ldpaa_eth_priv {
 	struct phy_device *phydev;
 };
 
+struct dprc_endpoint dpmac_endpoint;
+struct dprc_endpoint dpni_endpoint;
+
 extern struct fsl_mc_io *dflt_mc_io;
 extern struct fsl_dpbp_obj *dflt_dpbp;
 extern struct fsl_dpio_obj *dflt_dpio;
+extern struct fsl_dpni_obj *dflt_dpni;
+extern uint16_t dflt_dprc_handle;
 
 static void ldpaa_dpbp_drain_cnt(int count);
 static void ldpaa_dpbp_drain(void);
@@ -145,4 +146,6 @@ static void ldpaa_dpbp_free(void);
 static int ldpaa_dpni_setup(struct ldpaa_eth_priv *priv);
 static int ldpaa_dpbp_setup(void);
 static int ldpaa_dpni_bind(struct ldpaa_eth_priv *priv);
+static int ldpaa_dpmac_setup(struct ldpaa_eth_priv *priv);
+static int ldpaa_dpmac_bind(struct ldpaa_eth_priv *priv);
 #endif	/* __LDPAA_H */
diff --git a/drivers/net/ldpaa_eth/ldpaa_wriop.c b/drivers/net/ldpaa_eth/ldpaa_wriop.c
index 926057a..f7f26c2 100644
--- a/drivers/net/ldpaa_eth/ldpaa_wriop.c
+++ b/drivers/net/ldpaa_eth/ldpaa_wriop.c
@@ -23,17 +23,17 @@ __weak phy_interface_t wriop_dpmac_enet_if(int dpmac_id, int lane_prtc)
 void wriop_init_dpmac(int sd, int dpmac_id, int lane_prtcl)
 {
 	phy_interface_t enet_if;
-	int index = dpmac_id + sd * 8;
 
-	dpmac_info[index].enabled = 0;
-	dpmac_info[index].id = 0;
-	dpmac_info[index].enet_if = PHY_INTERFACE_MODE_NONE;
+	dpmac_info[dpmac_id].enabled = 0;
+	dpmac_info[dpmac_id].id = 0;
+	dpmac_info[dpmac_id].phy_addr = -1;
+	dpmac_info[dpmac_id].enet_if = PHY_INTERFACE_MODE_NONE;
 
-	enet_if = wriop_dpmac_enet_if(index, lane_prtcl);
+	enet_if = wriop_dpmac_enet_if(dpmac_id, lane_prtcl);
 	if (enet_if != PHY_INTERFACE_MODE_NONE) {
-		dpmac_info[index].enabled = 1;
-		dpmac_info[index].id = index;
-		dpmac_info[index].enet_if = enet_if;
+		dpmac_info[dpmac_id].enabled = 1;
+		dpmac_info[dpmac_id].id = dpmac_id;
+		dpmac_info[dpmac_id].enet_if = enet_if;
 	}
 }
 
@@ -72,6 +72,17 @@ void wriop_enable_dpmac(int dpmac_id)
 	wriop_dpmac_enable(dpmac_id);
 }
 
+u8 wriop_is_enabled_dpmac(int dpmac_id)
+{
+	int i = wriop_dpmac_to_index(dpmac_id);
+
+	if (i == -1)
+		return -1;
+
+	return dpmac_info[i].enabled;
+}
+
+
 void wriop_set_mdio(int dpmac_id, struct mii_dev *bus)
 {
 	int i = wriop_dpmac_to_index(dpmac_id);
diff --git a/drivers/net/ldpaa_eth/ls2085a.c b/drivers/net/ldpaa_eth/ls2080a.c
index 93ed4f1..93ed4f1 100644
--- a/drivers/net/ldpaa_eth/ls2085a.c
+++ b/drivers/net/ldpaa_eth/ls2080a.c
diff --git a/drivers/net/phy/aquantia.c b/drivers/net/phy/aquantia.c
index ef4da4e..f90c2ae 100644
--- a/drivers/net/phy/aquantia.c
+++ b/drivers/net/phy/aquantia.c
@@ -146,11 +146,26 @@ struct phy_driver aqr105_driver = {
 	.startup = &aquantia_startup,
 	.shutdown = &gen10g_shutdown,
 };
+
+struct phy_driver aqr405_driver = {
+	.name = "Aquantia AQR405",
+	.uid = 0x3a1b4b2,
+	.mask = 0xfffffff0,
+	.features = PHY_10G_FEATURES,
+	.mmds = (MDIO_MMD_PMAPMD | MDIO_MMD_PCS|
+		 MDIO_MMD_PHYXS | MDIO_MMD_AN |
+		 MDIO_MMD_VEND1),
+	.config = &aquantia_config,
+	.startup = &aquantia_startup,
+	.shutdown = &gen10g_shutdown,
+};
+
 int phy_aquantia_init(void)
 {
 	phy_register(&aq1202_driver);
 	phy_register(&aq2104_driver);
 	phy_register(&aqr105_driver);
+	phy_register(&aqr405_driver);
 
 	return 0;
 }
diff --git a/drivers/pci/pcie_layerscape.c b/drivers/pci/pcie_layerscape.c
index 4cee038..58e88ae 100644
--- a/drivers/pci/pcie_layerscape.c
+++ b/drivers/pci/pcie_layerscape.c
@@ -11,8 +11,9 @@
 #include <asm/io.h>
 #include <errno.h>
 #include <malloc.h>
-#ifdef CONFIG_FSL_LAYERSCAPE
+#ifndef CONFIG_LS102XA
 #include <asm/arch/fdt.h>
+#include <asm/arch/soc.h>
 #endif
 
 #ifndef CONFIG_SYS_PCI_MEMORY_BUS
@@ -57,11 +58,6 @@
 #define PCIE_ATU_FUNC(x)		(((x) & 0x7) << 16)
 #define PCIE_ATU_UPPER_TARGET		0x91C
 
-/* LUT registers */
-#define PCIE_LUT_BASE		0x80000
-#define PCIE_LUT_LCTRL0		0x7F8
-#define PCIE_LUT_DBG		0x7FC
-
 #define PCIE_DBI_RO_WR_EN	0x8bc
 
 #define PCIE_LINK_CAP		0x7c
@@ -162,7 +158,7 @@ static int ls_pcie_link_state(struct ls_pcie *pcie)
 {
 	u32 state;
 
-	state = readl(pcie->dbi + PCIE_LUT_BASE + PCIE_LUT_DBG) &
+	state = pex_lut_in32(pcie->dbi + PCIE_LUT_BASE + PCIE_LUT_DBG) &
 		LTSSM_STATE_MASK;
 	if (state < LTSSM_PCIE_L0) {
 		debug("....PCIe link error. LTSSM=0x%02x.\n", state);
@@ -466,16 +462,20 @@ static void ls_pcie_setup_ep(struct ls_pcie *pcie, struct ls_pcie_info *info)
 
 		for (pf = 0; pf < PCIE_PF_NUM; pf++) {
 			for (vf = 0; vf <= PCIE_VF_NUM; vf++) {
+#ifndef CONFIG_LS102XA
 				writel(PCIE_LCTRL0_VAL(pf, vf),
 				       pcie->dbi + PCIE_LUT_BASE +
 				       PCIE_LUT_LCTRL0);
+#endif
 				ls_pcie_ep_setup_bars(pcie->dbi);
 				ls_pcie_ep_setup_atu(pcie, info);
 			}
 		}
 
 		/* Disable CFG2 */
+#ifndef CONFIG_LS102XA
 		writel(0, pcie->dbi + PCIE_LUT_BASE + PCIE_LUT_LCTRL0);
+#endif
 	} else {
 		ls_pcie_ep_setup_bars(pcie->dbi + PCIE_NO_SRIOV_BAR_BASE);
 		ls_pcie_ep_setup_atu(pcie, info);
@@ -665,7 +665,7 @@ void ft_pci_setup(void *blob, bd_t *bd)
 }
 #endif
 
-#ifdef CONFIG_LS2085A
+#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
 
 void pcie_set_available_streamids(void *blob, const char *pcie_path,
 				  u32 *stream_ids, int count)
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 00640cd..2e8dbc7 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -575,14 +575,14 @@ unsigned long get_board_ddr_clk(void);
 #ifdef CONFIG_LPUART
 #define CONFIG_EXTRA_ENV_SETTINGS       \
 	"bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
-	"fdt_high=0xcfffffff\0"         \
-	"initrd_high=0xcfffffff\0"      \
+	"fdt_high=0xffffffff\0"         \
+	"initrd_high=0xffffffff\0"      \
 	"hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=null\0"
 #else
 #define CONFIG_EXTRA_ENV_SETTINGS	\
 	"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
-	"fdt_high=0xcfffffff\0"		\
-	"initrd_high=0xcfffffff\0"      \
+	"fdt_high=0xffffffff\0"		\
+	"initrd_high=0xffffffff\0"      \
 	"hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=null\0"
 #endif
 
diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h
new file mode 100644
index 0000000..4aeb238
--- /dev/null
+++ b/include/configs/ls1043aqds.h
@@ -0,0 +1,387 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __LS1043AQDS_H__
+#define __LS1043AQDS_H__
+
+#include "ls1043a_common.h"
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#if defined(CONFIG_NAND_BOOT) || defined(CONFIG_SD_BOOT)
+#define CONFIG_SYS_TEXT_BASE		0x82000000
+#else
+#define CONFIG_SYS_TEXT_BASE		0x60100000
+#endif
+
+#ifndef __ASSEMBLY__
+unsigned long get_board_sys_clk(void);
+unsigned long get_board_ddr_clk(void);
+#endif
+
+#define CONFIG_SYS_CLK_FREQ		100000000
+#define CONFIG_DDR_CLK_FREQ		100000000
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+
+#define CONFIG_LAYERSCAPE_NS_ACCESS
+
+#define CONFIG_DIMM_SLOTS_PER_CTLR	1
+/* Physical Memory Map */
+#define CONFIG_CHIP_SELECTS_PER_CTRL	4
+#define CONFIG_NR_DRAM_BANKS		1
+
+#define CONFIG_DDR_SPD
+#define SPD_EEPROM_ADDRESS		0x51
+#define CONFIG_SYS_SPD_BUS_NUM		0
+
+#define CONFIG_FSL_DDR_INTERACTIVE	/* Interactive debugging */
+#ifndef CONFIG_SYS_FSL_DDR4
+#define CONFIG_SYS_FSL_DDR3		/* Use DDR3 memory */
+#endif
+
+#define CONFIG_DDR_ECC
+#ifdef CONFIG_DDR_ECC
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
+#define CONFIG_MEM_INIT_VALUE           0xdeadbeef
+#endif
+
+#define CONFIG_SYS_HAS_SERDES
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+#define CONFIG_FMAN_ENET
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_VITESSE
+#define CONFIG_PHY_REALTEK
+#define CONFIG_PHYLIB_10G
+#define RGMII_PHY1_ADDR		0x1
+#define RGMII_PHY2_ADDR		0x2
+#define SGMII_CARD_PORT1_PHY_ADDR 0x1C
+#define SGMII_CARD_PORT2_PHY_ADDR 0x1D
+#define SGMII_CARD_PORT3_PHY_ADDR 0x1E
+#define SGMII_CARD_PORT4_PHY_ADDR 0x1F
+/* PHY address on QSGMII riser card on slot 1 */
+#define QSGMII_CARD_PORT1_PHY_ADDR_S1 0x4
+#define QSGMII_CARD_PORT2_PHY_ADDR_S1 0x5
+#define QSGMII_CARD_PORT3_PHY_ADDR_S1 0x6
+#define QSGMII_CARD_PORT4_PHY_ADDR_S1 0x7
+/* PHY address on QSGMII riser card on slot 2 */
+#define QSGMII_CARD_PORT1_PHY_ADDR_S2 0x8
+#define QSGMII_CARD_PORT2_PHY_ADDR_S2 0x9
+#define QSGMII_CARD_PORT3_PHY_ADDR_S2 0xA
+#define QSGMII_CARD_PORT4_PHY_ADDR_S2 0xB
+#endif
+
+#ifdef CONFIG_RAMBOOT_PBL
+#define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1043aqds/ls1043aqds_pbi.cfg
+#endif
+
+#ifdef CONFIG_NAND_BOOT
+#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1043aqds/ls1043aqds_rcw_nand.cfg
+#endif
+
+#ifdef CONFIG_SD_BOOT
+#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1043aqds/ls1043aqds_rcw_sd_ifc.cfg
+#endif
+
+/*
+ * IFC Definitions
+ */
+#define CONFIG_SYS_NOR0_CSPR_EXT	(0x0)
+#define CONFIG_SYS_NOR0_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
+				CSPR_PORT_SIZE_16 | \
+				CSPR_MSEL_NOR | \
+				CSPR_V)
+#define CONFIG_SYS_NOR1_CSPR_EXT	(0x0)
+#define CONFIG_SYS_NOR1_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
+				+ 0x8000000) | \
+				CSPR_PORT_SIZE_16 | \
+				CSPR_MSEL_NOR | \
+				CSPR_V)
+#define CONFIG_SYS_NOR_AMASK		IFC_AMASK(128 * 1024 * 1024)
+
+#define CONFIG_SYS_NOR_CSOR		(CSOR_NOR_ADM_SHIFT(4) | \
+					CSOR_NOR_TRHZ_80)
+#define CONFIG_SYS_NOR_FTIM0		(FTIM0_NOR_TACSE(0x4) | \
+					FTIM0_NOR_TEADC(0x5) | \
+					FTIM0_NOR_TEAHC(0x5))
+#define CONFIG_SYS_NOR_FTIM1		(FTIM1_NOR_TACO(0x35) | \
+					FTIM1_NOR_TRAD_NOR(0x1a) | \
+					FTIM1_NOR_TSEQRAD_NOR(0x13))
+#define CONFIG_SYS_NOR_FTIM2		(FTIM2_NOR_TCS(0x4) | \
+					FTIM2_NOR_TCH(0x4) | \
+					FTIM2_NOR_TWPH(0xe) | \
+					FTIM2_NOR_TWP(0x1c))
+#define CONFIG_SYS_NOR_FTIM3		0
+
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	1024	/* sectors per device */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
+
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE_PHYS, \
+					CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000}
+
+#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
+#define CONFIG_SYS_WRITE_SWAPPED_DATA
+
+/*
+ * NAND Flash Definitions
+ */
+#define CONFIG_NAND_FSL_IFC
+
+#define CONFIG_SYS_NAND_BASE		0x7e800000
+#define CONFIG_SYS_NAND_BASE_PHYS	CONFIG_SYS_NAND_BASE
+
+#define CONFIG_SYS_NAND_CSPR_EXT	(0x0)
+
+#define CONFIG_SYS_NAND_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
+				| CSPR_PORT_SIZE_8	\
+				| CSPR_MSEL_NAND	\
+				| CSPR_V)
+#define CONFIG_SYS_NAND_AMASK	IFC_AMASK(64*1024)
+#define CONFIG_SYS_NAND_CSOR	(CSOR_NAND_ECC_ENC_EN	/* ECC on encode */ \
+				| CSOR_NAND_ECC_DEC_EN	/* ECC on decode */ \
+				| CSOR_NAND_ECC_MODE_4	/* 4-bit ECC */ \
+				| CSOR_NAND_RAL_3	/* RAL = 3 Bytes */ \
+				| CSOR_NAND_PGS_2K	/* Page Size = 2K */ \
+				| CSOR_NAND_SPRZ_64	/* Spare size = 64 */ \
+				| CSOR_NAND_PB(64))	/* 64 Pages Per Block */
+
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+
+#define CONFIG_SYS_NAND_FTIM0		(FTIM0_NAND_TCCST(0x7) | \
+					FTIM0_NAND_TWP(0x18)   | \
+					FTIM0_NAND_TWCHT(0x7) | \
+					FTIM0_NAND_TWH(0xa))
+#define CONFIG_SYS_NAND_FTIM1		(FTIM1_NAND_TADLE(0x32) | \
+					FTIM1_NAND_TWBE(0x39)  | \
+					FTIM1_NAND_TRR(0xe)   | \
+					FTIM1_NAND_TRP(0x18))
+#define CONFIG_SYS_NAND_FTIM2		(FTIM2_NAND_TRAD(0xf) | \
+					FTIM2_NAND_TREH(0xa) | \
+					FTIM2_NAND_TWHRE(0x1e))
+#define CONFIG_SYS_NAND_FTIM3           0x0
+
+#define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_MTD_NAND_VERIFY_WRITE
+#define CONFIG_CMD_NAND
+
+#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
+
+#ifdef CONFIG_NAND_BOOT
+#define CONFIG_SPL_PAD_TO		0x20000		/* block aligned */
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	CONFIG_SPL_PAD_TO
+#define CONFIG_SYS_NAND_U_BOOT_SIZE	(640 << 10)
+#endif
+
+/*
+ * QIXIS Definitions
+ */
+#define CONFIG_FSL_QIXIS
+
+#ifdef CONFIG_FSL_QIXIS
+#define QIXIS_BASE			0x7fb00000
+#define QIXIS_BASE_PHYS			QIXIS_BASE
+#define CONFIG_SYS_I2C_FPGA_ADDR	0x66
+#define QIXIS_LBMAP_SWITCH		6
+#define QIXIS_LBMAP_MASK		0x0f
+#define QIXIS_LBMAP_SHIFT		0
+#define QIXIS_LBMAP_DFLTBANK		0x00
+#define QIXIS_LBMAP_ALTBANK		0x04
+#define QIXIS_RST_CTL_RESET		0x44
+#define QIXIS_RCFG_CTL_RECONFIG_IDLE	0x20
+#define QIXIS_RCFG_CTL_RECONFIG_START	0x21
+#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE	0x08
+
+#define CONFIG_SYS_FPGA_CSPR_EXT	(0x0)
+#define CONFIG_SYS_FPGA_CSPR		(CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \
+					CSPR_PORT_SIZE_8 | \
+					CSPR_MSEL_GPCM | \
+					CSPR_V)
+#define CONFIG_SYS_FPGA_AMASK		IFC_AMASK(64 * 1024)
+#define CONFIG_SYS_FPGA_CSOR		(CSOR_NOR_ADM_SHIFT(4) | \
+					CSOR_NOR_NOR_MODE_AVD_NOR | \
+					CSOR_NOR_TRHZ_80)
+
+/*
+ * QIXIS Timing parameters for IFC GPCM
+ */
+#define CONFIG_SYS_FPGA_FTIM0		(FTIM0_GPCM_TACSE(0xc) | \
+					FTIM0_GPCM_TEADC(0x20) | \
+					FTIM0_GPCM_TEAHC(0x10))
+#define CONFIG_SYS_FPGA_FTIM1		(FTIM1_GPCM_TACO(0x50) | \
+					FTIM1_GPCM_TRAD(0x1f))
+#define CONFIG_SYS_FPGA_FTIM2		(FTIM2_GPCM_TCS(0x8) | \
+					FTIM2_GPCM_TCH(0x8) | \
+					FTIM2_GPCM_TWP(0xf0))
+#define CONFIG_SYS_FPGA_FTIM3		0x0
+#endif
+
+#ifdef CONFIG_NAND_BOOT
+#define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NAND_CSPR_EXT
+#define CONFIG_SYS_CSPR0		CONFIG_SYS_NAND_CSPR
+#define CONFIG_SYS_AMASK0		CONFIG_SYS_NAND_AMASK
+#define CONFIG_SYS_CSOR0		CONFIG_SYS_NAND_CSOR
+#define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NAND_FTIM0
+#define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NAND_FTIM1
+#define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NAND_FTIM2
+#define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NAND_FTIM3
+#define CONFIG_SYS_CSPR1_EXT		CONFIG_SYS_NOR0_CSPR_EXT
+#define CONFIG_SYS_CSPR1		CONFIG_SYS_NOR0_CSPR
+#define CONFIG_SYS_AMASK1		CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR1		CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NOR_FTIM3
+#define CONFIG_SYS_CSPR2_EXT		CONFIG_SYS_NOR1_CSPR_EXT
+#define CONFIG_SYS_CSPR2		CONFIG_SYS_NOR1_CSPR
+#define CONFIG_SYS_AMASK2		CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR2		CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS2_FTIM0		CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS2_FTIM1		CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS2_FTIM2		CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_NOR_FTIM3
+#define CONFIG_SYS_CSPR3_EXT		CONFIG_SYS_FPGA_CSPR_EXT
+#define CONFIG_SYS_CSPR3		CONFIG_SYS_FPGA_CSPR
+#define CONFIG_SYS_AMASK3		CONFIG_SYS_FPGA_AMASK
+#define CONFIG_SYS_CSOR3		CONFIG_SYS_FPGA_CSOR
+#define CONFIG_SYS_CS3_FTIM0		CONFIG_SYS_FPGA_FTIM0
+#define CONFIG_SYS_CS3_FTIM1		CONFIG_SYS_FPGA_FTIM1
+#define CONFIG_SYS_CS3_FTIM2		CONFIG_SYS_FPGA_FTIM2
+#define CONFIG_SYS_CS3_FTIM3		CONFIG_SYS_FPGA_FTIM3
+#else
+#define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NOR0_CSPR_EXT
+#define CONFIG_SYS_CSPR0		CONFIG_SYS_NOR0_CSPR
+#define CONFIG_SYS_AMASK0		CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR0		CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NOR_FTIM3
+#define CONFIG_SYS_CSPR1_EXT		CONFIG_SYS_NOR1_CSPR_EXT
+#define CONFIG_SYS_CSPR1		CONFIG_SYS_NOR1_CSPR
+#define CONFIG_SYS_AMASK1		CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR1		CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NOR_FTIM3
+#define CONFIG_SYS_CSPR2_EXT		CONFIG_SYS_NAND_CSPR_EXT
+#define CONFIG_SYS_CSPR2		CONFIG_SYS_NAND_CSPR
+#define CONFIG_SYS_AMASK2		CONFIG_SYS_NAND_AMASK
+#define CONFIG_SYS_CSOR2		CONFIG_SYS_NAND_CSOR
+#define CONFIG_SYS_CS2_FTIM0		CONFIG_SYS_NAND_FTIM0
+#define CONFIG_SYS_CS2_FTIM1		CONFIG_SYS_NAND_FTIM1
+#define CONFIG_SYS_CS2_FTIM2		CONFIG_SYS_NAND_FTIM2
+#define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_NAND_FTIM3
+#define CONFIG_SYS_CSPR3_EXT		CONFIG_SYS_FPGA_CSPR_EXT
+#define CONFIG_SYS_CSPR3		CONFIG_SYS_FPGA_CSPR
+#define CONFIG_SYS_AMASK3		CONFIG_SYS_FPGA_AMASK
+#define CONFIG_SYS_CSOR3		CONFIG_SYS_FPGA_CSOR
+#define CONFIG_SYS_CS3_FTIM0		CONFIG_SYS_FPGA_FTIM0
+#define CONFIG_SYS_CS3_FTIM1		CONFIG_SYS_FPGA_FTIM1
+#define CONFIG_SYS_CS3_FTIM2		CONFIG_SYS_FPGA_FTIM2
+#define CONFIG_SYS_CS3_FTIM3		CONFIG_SYS_FPGA_FTIM3
+#endif
+
+/*
+ * I2C bus multiplexer
+ */
+#define I2C_MUX_PCA_ADDR_PRI		0x77
+#define I2C_MUX_PCA_ADDR_SEC		0x76 /* Secondary multiplexer */
+#define I2C_RETIMER_ADDR		0x18
+#define I2C_MUX_CH_DEFAULT		0x8
+#define I2C_MUX_CH_CH7301		0xC
+#define I2C_MUX_CH5			0xD
+#define I2C_MUX_CH7			0xF
+
+#define I2C_MUX_CH_VOL_MONITOR 0xa
+
+/* Voltage monitor on channel 2*/
+#define I2C_VOL_MONITOR_ADDR           0x40
+#define I2C_VOL_MONITOR_BUS_V_OFFSET   0x2
+#define I2C_VOL_MONITOR_BUS_V_OVF      0x1
+#define I2C_VOL_MONITOR_BUS_V_SHIFT    3
+
+#define CONFIG_VID_FLS_ENV		"ls1043aqds_vdd_mv"
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_VID
+#endif
+#define CONFIG_VOL_MONITOR_IR36021_SET
+#define CONFIG_VOL_MONITOR_INA220
+/* The lowest and highest voltage allowed for LS1043AQDS */
+#define VDD_MV_MIN			819
+#define VDD_MV_MAX			1212
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_MISC_INIT_R
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_PROMPT		"=> "
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_PBSIZE		\
+		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+
+#define CONFIG_CMD_GREPENV
+#define CONFIG_CMD_MEMINFO
+#define CONFIG_CMD_MEMTEST
+#define CONFIG_SYS_MEMTEST_START	0x80000000
+#define CONFIG_SYS_MEMTEST_END		0x9fffffff
+
+#define CONFIG_SYS_HZ			1000
+
+/*
+ * Stack sizes
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE		(30 * 1024)
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
+#else
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
+#endif
+
+/*
+ * Environment
+ */
+#define CONFIG_ENV_OVERWRITE
+
+#ifdef CONFIG_NAND_BOOT
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_SIZE			0x2000
+#define CONFIG_ENV_OFFSET		(10 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#elif defined(CONFIG_SD_BOOT)
+#define CONFIG_ENV_OFFSET		(1024 * 1024)
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV		0
+#define CONFIG_ENV_SIZE			0x2000
+#else
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x200000)
+#define CONFIG_ENV_SECT_SIZE		0x20000
+#define CONFIG_ENV_SIZE			0x20000
+#endif
+
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_CMD_MII
+#define CONFIG_CMDLINE_TAG
+
+#endif /* __LS1043AQDS_H__ */
diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h
index 307d947..7d113a0 100644
--- a/include/configs/ls1043ardb.h
+++ b/include/configs/ls1043ardb.h
@@ -222,6 +222,16 @@
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
 
+/* DSPI */
+#define CONFIG_FSL_DSPI
+#ifdef CONFIG_FSL_DSPI
+#define CONFIG_CMD_SF
+#define CONFIG_DM_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_SF_DEFAULT_BUS		1
+#define CONFIG_SF_DEFAULT_CS		0
+#endif
+
 /*
  * Environment
  */
@@ -268,4 +278,17 @@
 #define CONFIG_ETHPRIME			"FM1@DTSEC3"
 #endif
 
+/* USB */
+#define CONFIG_HAS_FSL_XHCI_USB
+#ifdef CONFIG_HAS_FSL_XHCI_USB
+#define CONFIG_USB_XHCI
+#define CONFIG_USB_XHCI_FSL
+#define CONFIG_USB_XHCI_DWC3
+#define CONFIG_USB_MAX_CONTROLLER_COUNT		3
+#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS	2
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_EXT2
+#endif
+
 #endif /* __LS1043ARDB_H__ */
diff --git a/include/configs/ls2085a_common.h b/include/configs/ls2080a_common.h
index f9bca44..2e1fe7a 100644
--- a/include/configs/ls2085a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -11,7 +11,6 @@
 #define CONFIG_REMAKE_ELF
 #define CONFIG_FSL_LAYERSCAPE
 #define CONFIG_FSL_LSCH3
-#define CONFIG_LS2085A
 #define CONFIG_MP
 #define CONFIG_GICV3
 #define CONFIG_FSL_TZPC_BP147
@@ -20,7 +19,7 @@
 #define CONFIG_ARM_ERRATA_828024
 #define CONFIG_ARM_ERRATA_826974
 
-#include <asm/arch/ls2085a_stream_id.h>
+#include <asm/arch/ls2080a_stream_id.h>
 #include <asm/arch/config.h>
 #if (defined(CONFIG_SYS_FSL_SRDS_1) || defined(CONFIG_SYS_FSL_SRDS_2))
 #define	CONFIG_SYS_HAS_SERDES
@@ -80,6 +79,7 @@
 #define CPU_RELEASE_ADDR		secondary_boot_func
 
 #define CONFIG_SYS_FSL_OTHER_DDR_NUM_CTRLS
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
 #define CONFIG_SYS_DP_DDR_BASE		0x6000000000ULL
 /*
  * DDR controller use 0 as the base address for binding.
@@ -88,6 +88,7 @@
 #define CONFIG_SYS_DP_DDR_BASE_PHY	0
 #define CONFIG_DP_DDR_CTRL		2
 #define CONFIG_DP_DDR_NUM_CTRLS		1
+#endif
 
 /* Generic Timer Definitions */
 /*
@@ -182,8 +183,10 @@ unsigned long long get_qixis_addr(void);
 #define CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET    0x00F00000
 #define CONFIG_SYS_LS_MC_DPL_MAX_LENGTH	    0x20000
 #define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET    0x00F20000
+#ifdef CONFIG_LS2085A
 #define CONFIG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH	0x200000
 #define CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET	0x07000000
+#endif
 
 /*
  * Carve out a DDR region which will not be used by u-boot/Linux
@@ -204,7 +207,13 @@ unsigned long long get_qixis_addr(void);
 #define CONFIG_PCIE3		/* PCIE controler 3 */
 #define CONFIG_PCIE4		/* PCIE controler 4 */
 #define CONFIG_PCIE_LAYERSCAPE	/* Use common FSL Layerscape PCIe code */
+#ifdef CONFIG_LS2080A
+#define FSL_PCIE_COMPAT "fsl,ls2080a-pcie"
+#endif
+
+#ifdef CONFIG_LS2085A
 #define FSL_PCIE_COMPAT "fsl,ls2085a-pcie"
+#endif
 
 #define CONFIG_SYS_PCI_64BIT
 
@@ -244,6 +253,9 @@ unsigned long long get_qixis_addr(void);
 
 #define CONFIG_DISPLAY_CPUINFO
 
+/* Allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
 /* Initial environment variables */
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
diff --git a/include/configs/ls2085a_emu.h b/include/configs/ls2080a_emu.h
index 2d68e1b..4a7ba24 100644
--- a/include/configs/ls2085a_emu.h
+++ b/include/configs/ls2080a_emu.h
@@ -7,10 +7,17 @@
 #ifndef __LS2_EMU_H
 #define __LS2_EMU_H
 
-#include "ls2085a_common.h"
+#include "ls2080a_common.h"
 
+#ifdef CONFIG_LS2080A
+#define CONFIG_IDENT_STRING		" LS2080A-EMU"
+#define CONFIG_BOOTP_VCI_STRING		"U-boot.LS2080A-EMU"
+#endif
+
+#ifdef CONFIG_LS2085A
 #define CONFIG_IDENT_STRING		" LS2085A-EMU"
 #define CONFIG_BOOTP_VCI_STRING		"U-boot.LS2085A-EMU"
+#endif
 
 #define CONFIG_SYS_CLK_FREQ	100000000
 #define CONFIG_DDR_CLK_FREQ	133333333
@@ -27,7 +34,9 @@
 #define CONFIG_SYS_SPD_BUS_NUM	1	/* SPD on I2C bus 1 */
 #define CONFIG_DIMM_SLOTS_PER_CTLR		1
 #define CONFIG_CHIP_SELECTS_PER_CTRL		4
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
 #define CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR	1
+#endif
 
 #define CONFIG_FSL_DDR_SYNC_REFRESH
 
diff --git a/include/configs/ls2085a_simu.h b/include/configs/ls2080a_simu.h
index bd15b3d..876ee30 100644
--- a/include/configs/ls2085a_simu.h
+++ b/include/configs/ls2080a_simu.h
@@ -7,10 +7,17 @@
 #ifndef __LS2_SIMU_H
 #define __LS2_SIMU_H
 
-#include "ls2085a_common.h"
+#include "ls2080a_common.h"
 
+#ifdef CONFIG_LS2080A
+#define CONFIG_IDENT_STRING		" LS2080A-SIMU"
+#define CONFIG_BOOTP_VCI_STRING		"U-boot.LS2080A-SIMU"
+#endif
+
+#ifdef CONFIG_LS2085A
 #define CONFIG_IDENT_STRING		" LS2085A-SIMU"
 #define CONFIG_BOOTP_VCI_STRING		"U-boot.LS2085A-SIMU"
+#endif
 
 #define CONFIG_SYS_CLK_FREQ	100000000
 #define CONFIG_DDR_CLK_FREQ	133333333
@@ -20,7 +27,9 @@
 
 #define CONFIG_DIMM_SLOTS_PER_CTLR		1
 #define CONFIG_CHIP_SELECTS_PER_CTRL		4
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
 #define CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR	1
+#endif
 
 /* SMSC 91C111 ethernet configuration */
 #define CONFIG_SMC91111
diff --git a/include/configs/ls2085aqds.h b/include/configs/ls2080aqds.h
index 8a97f75..54bcae9 100644
--- a/include/configs/ls2085aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -7,7 +7,7 @@
 #ifndef __LS2_QDS_H
 #define __LS2_QDS_H
 
-#include "ls2085a_common.h"
+#include "ls2080a_common.h"
 
 #define CONFIG_DISPLAY_BOARDINFO
 
@@ -35,7 +35,9 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_SPD_BUS_NUM	0	/* SPD on I2C bus 0 */
 #define CONFIG_DIMM_SLOTS_PER_CTLR		2
 #define CONFIG_CHIP_SELECTS_PER_CTRL		4
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
 #define CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR	1
+#endif
 #define CONFIG_FSL_DDR_BIST	/* enable built-in memory test */
 
 /* undefined CONFIG_FSL_DDR_SYNC_REFRESH for simulator */
@@ -250,19 +252,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR
 #define CONFIG_SYS_DEBUG_SERVER_FW_ADDR	0x580D00000ULL
 
-/* MC firmware */
-#define CONFIG_SYS_LS_MC_FW_IN_NOR
-#define CONFIG_SYS_LS_MC_FW_ADDR	0x580300000ULL
-
-#define CONFIG_SYS_LS_MC_DPL_IN_NOR
-#define CONFIG_SYS_LS_MC_DPL_ADDR	0x580700000ULL
-
-#define CONFIG_SYS_LS_MC_DPC_IN_NOR
-#define CONFIG_SYS_LS_MC_DPC_ADDR	0x580800000ULL
-
 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
-#define CONFIG_SYS_LS_MC_AIOP_IMG_IN_NOR
-#define CONFIG_SYS_LS_MC_AIOP_IMG_ADDR	0x580900000ULL
 
 /*
  * I2C
diff --git a/include/configs/ls2085ardb.h b/include/configs/ls2080ardb.h
index 26f74b6..44a47d5 100644
--- a/include/configs/ls2085ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -7,7 +7,7 @@
 #ifndef __LS2_RDB_H
 #define __LS2_RDB_H
 
-#include "ls2085a_common.h"
+#include "ls2080a_common.h"
 
 #undef CONFIG_CONS_INDEX
 #define CONFIG_CONS_INDEX       2
@@ -37,7 +37,9 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_SPD_BUS_NUM	0	/* SPD on I2C bus 0 */
 #define CONFIG_DIMM_SLOTS_PER_CTLR		2
 #define CONFIG_CHIP_SELECTS_PER_CTRL		4
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
 #define CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR	1
+#endif
 #define CONFIG_FSL_DDR_BIST	/* enable built-in memory test */
 
 /* undefined CONFIG_FSL_DDR_SYNC_REFRESH for simulator */
@@ -223,19 +225,7 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR
 #define CONFIG_SYS_DEBUG_SERVER_FW_ADDR	0x580D00000ULL
 
-/* MC firmware */
-#define CONFIG_SYS_LS_MC_FW_IN_NOR
-#define CONFIG_SYS_LS_MC_FW_ADDR	0x580300000ULL
-
-#define CONFIG_SYS_LS_MC_DPL_IN_NOR
-#define CONFIG_SYS_LS_MC_DPL_ADDR	0x580700000ULL
-
-#define CONFIG_SYS_LS_MC_DPC_IN_NOR
-#define CONFIG_SYS_LS_MC_DPC_ADDR	0x580800000ULL
-
 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
-#define CONFIG_SYS_LS_MC_AIOP_IMG_IN_NOR
-#define CONFIG_SYS_LS_MC_AIOP_IMG_ADDR	0x580900000ULL
 
 /*
  * I2C
diff --git a/include/fsl-mc/fsl_dpbp.h b/include/fsl-mc/fsl_dpbp.h
index 3cdc94e..92c5437 100644
--- a/include/fsl-mc/fsl_dpbp.h
+++ b/include/fsl-mc/fsl_dpbp.h
@@ -20,6 +20,8 @@
 /* Command IDs */
 #define DPBP_CMDID_CLOSE				0x800
 #define DPBP_CMDID_OPEN					0x804
+#define DPBP_CMDID_CREATE				0x904
+#define DPBP_CMDID_DESTROY				0x900
 
 #define DPBP_CMDID_ENABLE				0x002
 #define DPBP_CMDID_DISABLE				0x003
@@ -83,6 +85,52 @@ int dpbp_close(struct fsl_mc_io	*mc_io,
 	       uint16_t	token);
 
 /**
+ * struct dpbp_cfg - Structure representing DPBP configuration
+ * @options:	place holder
+ */
+struct dpbp_cfg {
+	uint32_t options;
+};
+
+/**
+ * dpbp_create() - Create the DPBP object.
+ * @mc_io:	Pointer to MC portal's I/O object
+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
+ * @cfg:	Configuration structure
+ * @token:	Returned token; use in subsequent API calls
+ *
+ * Create the DPBP object, allocate required resources and
+ * perform required initialization.
+ *
+ * The object can be created either by declaring it in the
+ * DPL file, or by calling this function.
+ * This function returns a unique authentication token,
+ * associated with the specific object ID and the specific MC
+ * portal; this token must be used in all subsequent calls to
+ * this specific object. For objects that are created using the
+ * DPL file, call dpbp_open function to get an authentication
+ * token first.
+ *
+ * Return:	'0' on Success; Error code otherwise.
+ */
+int dpbp_create(struct fsl_mc_io	*mc_io,
+		uint32_t		cmd_flags,
+		const struct dpbp_cfg	*cfg,
+		uint16_t		*token);
+
+/**
+ * dpbp_destroy() - Destroy the DPBP object and release all its resources.
+ * @mc_io:	Pointer to MC portal's I/O object
+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token:	Token of DPBP object
+ *
+ * Return:	'0' on Success; error code otherwise.
+ */
+int dpbp_destroy(struct fsl_mc_io	*mc_io,
+		 uint32_t		cmd_flags,
+		 uint16_t		token);
+
+/**
  * dpbp_enable() - Enable the DPBP.
  * @mc_io:	Pointer to MC portal's I/O object
  * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
diff --git a/include/fsl-mc/fsl_dpio.h b/include/fsl-mc/fsl_dpio.h
index 9e83a2e..0bc0b44 100644
--- a/include/fsl-mc/fsl_dpio.h
+++ b/include/fsl-mc/fsl_dpio.h
@@ -14,6 +14,8 @@
 /* Command IDs */
 #define DPIO_CMDID_CLOSE					0x800
 #define DPIO_CMDID_OPEN						0x803
+#define DPIO_CMDID_CREATE					0x903
+#define DPIO_CMDID_DESTROY					0x900
 
 #define DPIO_CMDID_ENABLE					0x002
 #define DPIO_CMDID_DISABLE					0x003
@@ -25,6 +27,14 @@
 	MC_CMD_OP(cmd, 0, 0,  32, int,     dpio_id)
 
 /*                cmd, param, offset, width, type, arg_name */
+#define DPIO_CMD_CREATE(cmd, cfg) \
+do { \
+	MC_CMD_OP(cmd, 0, 16, 2,  enum dpio_channel_mode,	\
+					   cfg->channel_mode);\
+	MC_CMD_OP(cmd, 0, 32, 8,  uint8_t, cfg->num_priorities);\
+} while (0)
+
+/*                cmd, param, offset, width, type, arg_name */
 #define DPIO_RSP_GET_ATTR(cmd, attr) \
 do { \
 	MC_RSP_OP(cmd, 0, 0,  32, int,	    attr->id);\
@@ -90,6 +100,56 @@ enum dpio_channel_mode {
 };
 
 /**
+ * struct dpio_cfg - Structure representing DPIO configuration
+ * @channel_mode: Notification channel mode
+ * @num_priorities: Number of priorities for the notification channel (1-8);
+ *			relevant only if 'channel_mode = DPIO_LOCAL_CHANNEL'
+ */
+struct dpio_cfg {
+	enum dpio_channel_mode	channel_mode;
+	uint8_t		num_priorities;
+};
+
+/**
+ * dpio_create() - Create the DPIO object.
+ * @mc_io:	Pointer to MC portal's I/O object
+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
+ * @cfg:	Configuration structure
+ * @token:	Returned token; use in subsequent API calls
+ *
+ * Create the DPIO object, allocate required resources and
+ * perform required initialization.
+ *
+ * The object can be created either by declaring it in the
+ * DPL file, or by calling this function.
+ *
+ * This function returns a unique authentication token,
+ * associated with the specific object ID and the specific MC
+ * portal; this token must be used in all subsequent calls to
+ * this specific object. For objects that are created using the
+ * DPL file, call dpio_open() function to get an authentication
+ * token first.
+ *
+ * Return:	'0' on Success; Error code otherwise.
+ */
+int dpio_create(struct fsl_mc_io	*mc_io,
+		uint32_t		cmd_flags,
+		const struct dpio_cfg	*cfg,
+		uint16_t		*token);
+
+/**
+ * dpio_destroy() - Destroy the DPIO object and release all its resources.
+ * @mc_io:	Pointer to MC portal's I/O object
+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token:	Token of DPIO object
+ *
+ * Return:	'0' on Success; Error code otherwise
+ */
+int dpio_destroy(struct fsl_mc_io	*mc_io,
+		 uint32_t		cmd_flags,
+		 uint16_t		token);
+
+/**
  * dpio_enable() - Enable the DPIO, allow I/O portal operations.
  * @mc_io:	Pointer to MC portal's I/O object
  * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
diff --git a/include/fsl-mc/fsl_dpmac.h b/include/fsl-mc/fsl_dpmac.h
new file mode 100644
index 0000000..24f0b48
--- /dev/null
+++ b/include/fsl-mc/fsl_dpmac.h
@@ -0,0 +1,468 @@
+/*
+ * Freescale Layerscape MC I/O wrapper
+ *
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ * Author: Prabhakar Kushwaha <prabhakar@freescale.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __FSL_DPMAC_H
+#define __FSL_DPMAC_H
+
+/* DPMAC Version */
+#define DPMAC_VER_MAJOR				3
+#define DPMAC_VER_MINOR				1
+
+/* Command IDs */
+#define DPMAC_CMDID_CLOSE			0x800
+#define DPMAC_CMDID_OPEN			0x80c
+#define DPMAC_CMDID_CREATE			0x90c
+#define DPMAC_CMDID_DESTROY			0x900
+
+#define DPMAC_CMDID_GET_ATTR			0x004
+#define DPMAC_CMDID_RESET			0x005
+
+#define DPMAC_CMDID_MDIO_READ			0x0c0
+#define DPMAC_CMDID_MDIO_WRITE			0x0c1
+#define DPMAC_CMDID_GET_LINK_CFG		0x0c2
+#define DPMAC_CMDID_SET_LINK_STATE		0x0c3
+#define DPMAC_CMDID_GET_COUNTER			0x0c4
+
+/*                cmd, param, offset, width, type, arg_name */
+#define DPMAC_CMD_CREATE(cmd, cfg) \
+	MC_CMD_OP(cmd, 0, 0,  32, int,      cfg->mac_id)
+
+/*                cmd, param, offset, width, type, arg_name */
+#define DPMAC_CMD_OPEN(cmd, dpmac_id) \
+	MC_CMD_OP(cmd, 0, 0,  32, int,	    dpmac_id)
+
+/*                cmd, param, offset, width, type,	arg_name */
+#define DPMAC_RSP_GET_ATTRIBUTES(cmd, attr) \
+do { \
+	MC_RSP_OP(cmd, 0, 0,  32, int,			attr->phy_id);\
+	MC_RSP_OP(cmd, 0, 32, 32, int,			attr->id);\
+	MC_RSP_OP(cmd, 1, 0,  16, uint16_t,		attr->version.major);\
+	MC_RSP_OP(cmd, 1, 16, 16, uint16_t,		attr->version.minor);\
+	MC_RSP_OP(cmd, 1, 32,  8, enum dpmac_link_type,	attr->link_type);\
+	MC_RSP_OP(cmd, 1, 40,  8, enum dpmac_eth_if,	attr->eth_if);\
+	MC_RSP_OP(cmd, 2, 0,  32, uint32_t,		attr->max_rate);\
+} while (0)
+
+/*                cmd, param, offset, width, type, arg_name */
+#define DPMAC_CMD_MDIO_READ(cmd, cfg) \
+do { \
+	MC_CMD_OP(cmd, 0, 0,  8,  uint8_t,  cfg->phy_addr); \
+	MC_CMD_OP(cmd, 0, 8,  8,  uint8_t,  cfg->reg); \
+} while (0)
+
+/*                cmd, param, offset, width, type, arg_name */
+#define DPMAC_RSP_MDIO_READ(cmd, data) \
+	MC_RSP_OP(cmd, 0, 16, 16, uint16_t, data)
+
+/*                cmd, param, offset, width, type, arg_name */
+#define DPMAC_CMD_MDIO_WRITE(cmd, cfg) \
+do { \
+	MC_CMD_OP(cmd, 0, 0,  8,  uint8_t,  cfg->phy_addr); \
+	MC_CMD_OP(cmd, 0, 8,  8,  uint8_t,  cfg->reg); \
+	MC_CMD_OP(cmd, 0, 16, 16, uint16_t, cfg->data); \
+} while (0)
+
+/*                cmd, param, offset, width, type, arg_name */
+#define DPMAC_RSP_GET_LINK_CFG(cmd, cfg) \
+do { \
+	MC_RSP_OP(cmd, 0, 0,  64, uint64_t, cfg->options); \
+	MC_RSP_OP(cmd, 1, 0,  32, uint32_t, cfg->rate); \
+} while (0)
+
+/*                cmd, param, offset, width, type, arg_name */
+#define DPMAC_CMD_SET_LINK_STATE(cmd, cfg) \
+do { \
+	MC_CMD_OP(cmd, 0, 0,  64, uint64_t, cfg->options); \
+	MC_CMD_OP(cmd, 1, 0,  32, uint32_t, cfg->rate); \
+	MC_CMD_OP(cmd, 2, 0,  1,  int,      cfg->up); \
+} while (0)
+
+/*                cmd, param, offset, width, type, arg_name */
+#define DPMAC_CMD_GET_COUNTER(cmd, type) \
+	MC_CMD_OP(cmd, 0, 0,  8, enum dpmac_counter, type)
+
+/*                cmd, param, offset, width, type, arg_name */
+#define DPMAC_RSP_GET_COUNTER(cmd, counter) \
+	MC_RSP_OP(cmd, 1, 0, 64, uint64_t, counter)
+
+/* Data Path MAC API
+ * Contains initialization APIs and runtime control APIs for DPMAC
+ */
+
+struct fsl_mc_io;
+
+/**
+ * dpmac_open() - Open a control session for the specified object.
+ * @mc_io:	Pointer to MC portal's I/O object
+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
+ * @dpmac_id:	DPMAC unique ID
+ * @token:	Returned token; use in subsequent API calls
+ *
+ * This function can be used to open a control session for an
+ * already created object; an object may have been declared in
+ * the DPL or by calling the dpmac_create function.
+ * This function returns a unique authentication token,
+ * associated with the specific object ID and the specific MC
+ * portal; this token must be used in all subsequent commands for
+ * this specific object
+ *
+ * Return:	'0' on Success; Error code otherwise.
+ */
+int dpmac_open(struct fsl_mc_io	*mc_io,
+	       uint32_t		cmd_flags,
+	       int			dpmac_id,
+	       uint16_t		*token);
+
+/**
+ * dpmac_close() - Close the control session of the object
+ * @mc_io:	Pointer to MC portal's I/O object
+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token:	Token of DPMAC object
+ *
+ * After this function is called, no further operations are
+ * allowed on the object without opening a new control session.
+ *
+ * Return:	'0' on Success; Error code otherwise.
+ */
+int dpmac_close(struct fsl_mc_io	*mc_io,
+		uint32_t		cmd_flags,
+		uint16_t		token);
+
+/**
+ * enum dpmac_link_type -  DPMAC link type
+ * @DPMAC_LINK_TYPE_NONE: No link
+ * @DPMAC_LINK_TYPE_FIXED: Link is fixed type
+ * @DPMAC_LINK_TYPE_PHY: Link by PHY ID
+ * @DPMAC_LINK_TYPE_BACKPLANE: Backplane link type
+ */
+enum dpmac_link_type {
+	DPMAC_LINK_TYPE_NONE,
+	DPMAC_LINK_TYPE_FIXED,
+	DPMAC_LINK_TYPE_PHY,
+	DPMAC_LINK_TYPE_BACKPLANE
+};
+
+/**
+ * enum dpmac_eth_if - DPMAC Ethrnet interface
+ * @DPMAC_ETH_IF_MII: MII interface
+ * @DPMAC_ETH_IF_RMII: RMII interface
+ * @DPMAC_ETH_IF_SMII: SMII interface
+ * @DPMAC_ETH_IF_GMII: GMII interface
+ * @DPMAC_ETH_IF_RGMII: RGMII interface
+ * @DPMAC_ETH_IF_SGMII: SGMII interface
+ * @DPMAC_ETH_IF_QSGMII: QSGMII interface
+ * @DPMAC_ETH_IF_XAUI: XAUI interface
+ * @DPMAC_ETH_IF_XFI: XFI interface
+ */
+enum dpmac_eth_if {
+	DPMAC_ETH_IF_MII,
+	DPMAC_ETH_IF_RMII,
+	DPMAC_ETH_IF_SMII,
+	DPMAC_ETH_IF_GMII,
+	DPMAC_ETH_IF_RGMII,
+	DPMAC_ETH_IF_SGMII,
+	DPMAC_ETH_IF_QSGMII,
+	DPMAC_ETH_IF_XAUI,
+	DPMAC_ETH_IF_XFI
+};
+
+/**
+ * struct dpmac_cfg - Structure representing DPMAC configuration
+ * @mac_id:	Represents the Hardware MAC ID; in case of multiple WRIOP,
+ *		the MAC IDs are continuous.
+ *		For example:  2 WRIOPs, 16 MACs in each:
+ *				MAC IDs for the 1st WRIOP: 1-16,
+ *				MAC IDs for the 2nd WRIOP: 17-32.
+ */
+struct dpmac_cfg {
+	int mac_id;
+};
+
+/**
+ * dpmac_create() - Create the DPMAC object.
+ * @mc_io:	Pointer to MC portal's I/O object
+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
+ * @cfg:	Configuration structure
+ * @token:	Returned token; use in subsequent API calls
+ *
+ * Create the DPMAC object, allocate required resources and
+ * perform required initialization.
+ *
+ * The object can be created either by declaring it in the
+ * DPL file, or by calling this function.
+ * This function returns a unique authentication token,
+ * associated with the specific object ID and the specific MC
+ * portal; this token must be used in all subsequent calls to
+ * this specific object. For objects that are created using the
+ * DPL file, call dpmac_open function to get an authentication
+ * token first.
+ *
+ * Return:	'0' on Success; Error code otherwise.
+ */
+int dpmac_create(struct fsl_mc_io	*mc_io,
+		 uint32_t		cmd_flags,
+		 const struct dpmac_cfg	*cfg,
+		 uint16_t		*token);
+
+/**
+ * dpmac_destroy() - Destroy the DPMAC object and release all its resources.
+ * @mc_io:	Pointer to MC portal's I/O object
+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token:	Token of DPMAC object
+ *
+ * Return:	'0' on Success; error code otherwise.
+ */
+int dpmac_destroy(struct fsl_mc_io	*mc_io,
+		  uint32_t		cmd_flags,
+		  uint16_t		token);
+
+/* DPMAC IRQ Index and Events */
+
+/* IRQ index */
+#define DPMAC_IRQ_INDEX						0
+/* IRQ event - indicates a change in link state */
+#define DPMAC_IRQ_EVENT_LINK_CFG_REQ		0x00000001
+/* irq event - Indicates that the link state changed */
+#define DPMAC_IRQ_EVENT_LINK_CHANGED		0x00000002
+
+/**
+ * struct dpmac_attr - Structure representing DPMAC attributes
+ * @id:		DPMAC object ID
+ * @phy_id:	PHY ID
+ * @link_type: link type
+ * @eth_if: Ethernet interface
+ * @max_rate: Maximum supported rate - in Mbps
+ * @version:	DPMAC version
+ */
+struct dpmac_attr {
+	int			id;
+	int			phy_id;
+	enum dpmac_link_type	link_type;
+	enum dpmac_eth_if	eth_if;
+	uint32_t		max_rate;
+	/**
+	 * struct version - Structure representing DPMAC version
+	 * @major:	DPMAC major version
+	 * @minor:	DPMAC minor version
+	 */
+	struct {
+		uint16_t major;
+		uint16_t minor;
+	} version;
+};
+
+/**
+ * dpmac_get_attributes - Retrieve DPMAC attributes.
+ *
+ * @mc_io:	Pointer to MC portal's I/O object
+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token:	Token of DPMAC object
+ * @attr:	Returned object's attributes
+ *
+ * Return:	'0' on Success; Error code otherwise.
+ */
+int dpmac_get_attributes(struct fsl_mc_io	*mc_io,
+			 uint32_t		cmd_flags,
+			 uint16_t		token,
+			 struct dpmac_attr	*attr);
+
+/**
+ * struct dpmac_mdio_cfg - DPMAC MDIO read/write parameters
+ * @phy_addr: MDIO device address
+ * @reg: Address of the register within the Clause 45 PHY device from which data
+ *	is to be read
+ * @data: Data read/write from/to MDIO
+ */
+struct dpmac_mdio_cfg {
+	uint8_t		phy_addr;
+	uint8_t		reg;
+	uint16_t	data;
+};
+
+/**
+ * dpmac_mdio_read() - Perform MDIO read transaction
+ * @mc_io:	Pointer to opaque I/O object
+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token:	Token of DPMAC object
+ * @cfg:	Structure with MDIO transaction parameters
+ *
+ * Return:	'0' on Success; Error code otherwise.
+ */
+int dpmac_mdio_read(struct fsl_mc_io		*mc_io,
+		    uint32_t			cmd_flags,
+		    uint16_t			token,
+		    struct dpmac_mdio_cfg	*cfg);
+
+/**
+ * dpmac_mdio_write() - Perform MDIO write transaction
+ * @mc_io:	Pointer to opaque I/O object
+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token:	Token of DPMAC object
+ * @cfg:	Structure with MDIO transaction parameters
+ *
+ * Return:	'0' on Success; Error code otherwise.
+ */
+int dpmac_mdio_write(struct fsl_mc_io		*mc_io,
+		     uint32_t			cmd_flags,
+		     uint16_t			token,
+		     struct dpmac_mdio_cfg	*cfg);
+
+/* DPMAC link configuration/state options */
+
+/* Enable auto-negotiation */
+#define DPMAC_LINK_OPT_AUTONEG		0x0000000000000001ULL
+/* Enable half-duplex mode */
+#define DPMAC_LINK_OPT_HALF_DUPLEX	0x0000000000000002ULL
+/* Enable pause frames */
+#define DPMAC_LINK_OPT_PAUSE		0x0000000000000004ULL
+/* Enable a-symmetric pause frames */
+#define DPMAC_LINK_OPT_ASYM_PAUSE	0x0000000000000008ULL
+
+/**
+ * struct dpmac_link_cfg - Structure representing DPMAC link configuration
+ * @rate: Link's rate - in Mbps
+ * @options: Enable/Disable DPMAC link cfg features (bitmap)
+ */
+struct dpmac_link_cfg {
+	uint32_t rate;
+	uint64_t options;
+};
+
+/**
+ * dpmac_get_link_cfg() - Get Ethernet link configuration
+ * @mc_io:	Pointer to opaque I/O object
+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token:	Token of DPMAC object
+ * @cfg:	Returned structure with the link configuration
+ *
+ * Return:	'0' on Success; Error code otherwise.
+ */
+int dpmac_get_link_cfg(struct fsl_mc_io	*mc_io,
+		       uint32_t		cmd_flags,
+		       uint16_t		token,
+		       struct dpmac_link_cfg	*cfg);
+
+/**
+ * struct dpmac_link_state - DPMAC link configuration request
+ * @rate: Rate in Mbps
+ * @options: Enable/Disable DPMAC link cfg features (bitmap)
+ * @up: Link state
+ */
+struct dpmac_link_state {
+	uint32_t	rate;
+	uint64_t	options;
+	int		up;
+};
+
+/**
+ * dpmac_set_link_state() - Set the Ethernet link status
+ * @mc_io:	Pointer to opaque I/O object
+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token:	Token of DPMAC object
+ * @link_state:	Link state configuration
+ *
+ * Return:	'0' on Success; Error code otherwise.
+ */
+int dpmac_set_link_state(struct fsl_mc_io		*mc_io,
+			 uint32_t			cmd_flags,
+			 uint16_t			token,
+			 struct dpmac_link_state	*link_state);
+
+/**
+ * enum dpni_counter - DPNI counter types
+ * @DPMAC_CNT_ING_FRAME_64: counts 64-octet frame, good or bad.
+ * @DPMAC_CNT_ING_FRAME_127: counts 65- to 127-octet frame, good or bad.
+ * @DPMAC_CNT_ING_FRAME_255: counts 128- to 255-octet frame, good or bad.
+ * @DPMAC_CNT_ING_FRAME_511: counts 256- to 511-octet frame, good or bad.
+ * @DPMAC_CNT_ING_FRAME_1023: counts 512- to 1023-octet frame, good or bad.
+ * @DPMAC_CNT_ING_FRAME_1518: counts 1024- to 1518-octet frame, good or bad.
+ * @DPMAC_CNT_ING_FRAME_1519_MAX: counts 1519-octet frame and larger
+ *				  (up to max frame length specified),
+ *				  good or bad.
+ * @DPMAC_CNT_ING_FRAG: counts packet which is shorter than 64 octets received
+ *			with a wrong CRC
+ * @DPMAC_CNT_ING_JABBER: counts packet longer than the maximum frame length
+ *			  specified, with a bad frame check sequence.
+ * @DPMAC_CNT_ING_FRAME_DISCARD: counts dropped packet due to internal errors.
+ *				 Occurs when a receive FIFO overflows.
+ *				 Includes also packets truncated as a result of
+ *				 the receive FIFO overflow.
+ * @DPMAC_CNT_ING_ALIGN_ERR: counts frame with an alignment error
+ *			     (optional used for wrong SFD)
+ * @DPMAC_CNT_EGR_UNDERSIZED: counts packet transmitted that was less than 64
+ *			      octets long with a good CRC.
+ * @DPMAC_CNT_ING_OVERSIZED: counts packet longer than the maximum frame length
+ *			     specified, with a good frame check sequence.
+ * @DPMAC_CNT_ING_VALID_PAUSE_FRAME: counts valid pause frame (regular and PFC).
+ * @DPMAC_CNT_EGR_VALID_PAUSE_FRAME: counts valid pause frame transmitted
+ *				     (regular and PFC).
+ * @DPMAC_CNT_ING_BYTE: counts octet received except preamble for all valid
+ *				frames and valid pause frames.
+ * @DPMAC_CNT_ING_MCAST_FRAME: counts received multicast frame
+ * @DPMAC_CNT_ING_BCAST_FRAME: counts received broadcast frame
+ * @DPMAC_CNT_ING_ALL_FRAME: counts each good or bad packet received.
+ * @DPMAC_CNT_ING_UCAST_FRAME: counts received unicast frame
+ * @DPMAC_CNT_ING_ERR_FRAME: counts frame received with an error
+ *			     (except for undersized/fragment frame)
+ * @DPMAC_CNT_EGR_BYTE: counts octet transmitted except preamble for all valid
+ *			frames and valid pause frames transmitted.
+ * @DPMAC_CNT_EGR_MCAST_FRAME: counts transmitted multicast frame
+ * @DPMAC_CNT_EGR_BCAST_FRAME: counts transmitted broadcast frame
+ * @DPMAC_CNT_EGR_UCAST_FRAME: counts transmitted unicast frame
+ * @DPMAC_CNT_EGR_ERR_FRAME: counts frame transmitted with an error
+ * @DPMAC_CNT_ING_GOOD_FRAME: counts frame received without error, including
+ *			      pause frames.
+ */
+enum dpmac_counter {
+	DPMAC_CNT_ING_FRAME_64,
+	DPMAC_CNT_ING_FRAME_127,
+	DPMAC_CNT_ING_FRAME_255,
+	DPMAC_CNT_ING_FRAME_511,
+	DPMAC_CNT_ING_FRAME_1023,
+	DPMAC_CNT_ING_FRAME_1518,
+	DPMAC_CNT_ING_FRAME_1519_MAX,
+	DPMAC_CNT_ING_FRAG,
+	DPMAC_CNT_ING_JABBER,
+	DPMAC_CNT_ING_FRAME_DISCARD,
+	DPMAC_CNT_ING_ALIGN_ERR,
+	DPMAC_CNT_EGR_UNDERSIZED,
+	DPMAC_CNT_ING_OVERSIZED,
+	DPMAC_CNT_ING_VALID_PAUSE_FRAME,
+	DPMAC_CNT_EGR_VALID_PAUSE_FRAME,
+	DPMAC_CNT_ING_BYTE,
+	DPMAC_CNT_ING_MCAST_FRAME,
+	DPMAC_CNT_ING_BCAST_FRAME,
+	DPMAC_CNT_ING_ALL_FRAME,
+	DPMAC_CNT_ING_UCAST_FRAME,
+	DPMAC_CNT_ING_ERR_FRAME,
+	DPMAC_CNT_EGR_BYTE,
+	DPMAC_CNT_EGR_MCAST_FRAME,
+	DPMAC_CNT_EGR_BCAST_FRAME,
+	DPMAC_CNT_EGR_UCAST_FRAME,
+	DPMAC_CNT_EGR_ERR_FRAME,
+	DPMAC_CNT_ING_GOOD_FRAME
+};
+
+/**
+ * dpmac_get_counter() - Read a specific DPMAC counter
+ * @mc_io:	Pointer to opaque I/O object
+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token:	Token of DPMAC object
+ * @type:	The requested counter
+ * @counter:	Returned counter value
+ *
+ * Return:	The requested counter; '0' otherwise.
+ */
+int dpmac_get_counter(struct fsl_mc_io		*mc_io,
+		      uint32_t			cmd_flags,
+		      uint16_t			token,
+		      enum dpmac_counter	 type,
+		      uint64_t			*counter);
+
+#endif /* __FSL_DPMAC_H */
diff --git a/include/fsl-mc/fsl_dpni.h b/include/fsl-mc/fsl_dpni.h
index e9a4712..140a009 100644
--- a/include/fsl-mc/fsl_dpni.h
+++ b/include/fsl-mc/fsl_dpni.h
@@ -13,6 +13,8 @@
 /* Command IDs */
 #define DPNI_CMDID_OPEN				0x801
 #define DPNI_CMDID_CLOSE			0x800
+#define DPNI_CMDID_CREATE			0x901
+#define DPNI_CMDID_DESTROY			0x900
 
 #define DPNI_CMDID_ENABLE			0x002
 #define DPNI_CMDID_DISABLE			0x003
@@ -48,6 +50,46 @@
 #define DPNI_CMD_OPEN(cmd, dpni_id) \
 	MC_CMD_OP(cmd,	 0,	0,	32,	int,	dpni_id)
 
+/*                cmd, param, offset, width, type, arg_name */
+#define DPNI_CMD_CREATE(cmd, cfg) \
+do { \
+	MC_CMD_OP(cmd, 0, 0,	8,  uint8_t,  cfg->adv.max_tcs); \
+	MC_CMD_OP(cmd, 0, 8,	8,  uint8_t,  cfg->adv.max_senders); \
+	MC_CMD_OP(cmd, 0, 16,	8,  uint8_t,  cfg->mac_addr[5]); \
+	MC_CMD_OP(cmd, 0, 24,	8,  uint8_t,  cfg->mac_addr[4]); \
+	MC_CMD_OP(cmd, 0, 32,	8,  uint8_t,  cfg->mac_addr[3]); \
+	MC_CMD_OP(cmd, 0, 40,	8,  uint8_t,  cfg->mac_addr[2]); \
+	MC_CMD_OP(cmd, 0, 48,	8,  uint8_t,  cfg->mac_addr[1]); \
+	MC_CMD_OP(cmd, 0, 56,	8,  uint8_t,  cfg->mac_addr[0]); \
+	MC_CMD_OP(cmd, 1, 0,	32, uint32_t, cfg->adv.options); \
+	MC_CMD_OP(cmd, 2, 0,	8,  uint8_t,  cfg->adv.max_unicast_filters); \
+	MC_CMD_OP(cmd, 2, 8,	8,  uint8_t,  cfg->adv.max_multicast_filters); \
+	MC_CMD_OP(cmd, 2, 16,	8,  uint8_t,  cfg->adv.max_vlan_filters); \
+	MC_CMD_OP(cmd, 2, 24,	8,  uint8_t,  cfg->adv.max_qos_entries); \
+	MC_CMD_OP(cmd, 2, 32,	8,  uint8_t,  cfg->adv.max_qos_key_size); \
+	MC_CMD_OP(cmd, 2, 48,	8,  uint8_t,  cfg->adv.max_dist_key_size); \
+	MC_CMD_OP(cmd, 2, 56,	8,  enum net_prot, cfg->adv.start_hdr); \
+	MC_CMD_OP(cmd, 3, 0,	8,  uint8_t,  cfg->adv.max_dist_per_tc[0]); \
+	MC_CMD_OP(cmd, 3, 8,	8,  uint8_t,  cfg->adv.max_dist_per_tc[1]); \
+	MC_CMD_OP(cmd, 3, 16,	8,  uint8_t,  cfg->adv.max_dist_per_tc[2]); \
+	MC_CMD_OP(cmd, 3, 24,	8,  uint8_t,  cfg->adv.max_dist_per_tc[3]); \
+	MC_CMD_OP(cmd, 3, 32,	8,  uint8_t,  cfg->adv.max_dist_per_tc[4]); \
+	MC_CMD_OP(cmd, 3, 40,	8,  uint8_t,  cfg->adv.max_dist_per_tc[5]); \
+	MC_CMD_OP(cmd, 3, 48,	8,  uint8_t,  cfg->adv.max_dist_per_tc[6]); \
+	MC_CMD_OP(cmd, 3, 56,	8,  uint8_t,  cfg->adv.max_dist_per_tc[7]); \
+	MC_CMD_OP(cmd, 4, 0,	16, uint16_t, \
+				    cfg->adv.ipr_cfg.max_reass_frm_size); \
+	MC_CMD_OP(cmd, 4, 16,	16, uint16_t, \
+				    cfg->adv.ipr_cfg.min_frag_size_ipv4); \
+	MC_CMD_OP(cmd, 4, 32,	16, uint16_t, \
+				    cfg->adv.ipr_cfg.min_frag_size_ipv6); \
+	MC_CMD_OP(cmd, 4, 48,	8,  uint8_t, cfg->adv.max_policers); \
+	MC_CMD_OP(cmd, 4, 56,	8,  uint8_t, cfg->adv.max_congestion_ctrl); \
+	MC_CMD_OP(cmd, 5, 0,	16, uint16_t, \
+				  cfg->adv.ipr_cfg.max_open_frames_ipv4); \
+	MC_CMD_OP(cmd, 5, 16,	16, uint16_t, \
+				  cfg->adv.ipr_cfg.max_open_frames_ipv6); \
+} while (0)
 
 /*                cmd, param, offset, width, type, arg_name */
 #define DPNI_CMD_SET_POOLS(cmd, cfg) \
@@ -475,6 +517,53 @@ int dpni_close(struct fsl_mc_io	*mc_io,
 	       uint32_t		cmd_flags,
 	       uint16_t		token);
 
+/* DPNI configuration options */
+
+/**
+ * Allow different distribution key profiles for different traffic classes;
+ * if not set, a single key profile is assumed
+ */
+#define DPNI_OPT_ALLOW_DIST_KEY_PER_TC		0x00000001
+
+/**
+ * Disable all non-error transmit confirmation; error frames are reported
+ * back to a common Tx error queue
+ */
+#define DPNI_OPT_TX_CONF_DISABLED		0x00000002
+
+/* Disable per-sender private Tx confirmation/error queue */
+#define DPNI_OPT_PRIVATE_TX_CONF_ERROR_DISABLED	0x00000004
+
+/**
+ * Support distribution based on hashed key;
+ * allows statistical distribution over receive queues in a traffic class
+ */
+#define DPNI_OPT_DIST_HASH			0x00000010
+
+/**
+ * Support distribution based on flow steering;
+ * allows explicit control of distribution over receive queues in a traffic
+ * class
+ */
+#define DPNI_OPT_DIST_FS			0x00000020
+
+/* Unicast filtering support */
+#define DPNI_OPT_UNICAST_FILTER			0x00000080
+/* Multicast filtering support */
+#define DPNI_OPT_MULTICAST_FILTER		0x00000100
+/* VLAN filtering support */
+#define DPNI_OPT_VLAN_FILTER			0x00000200
+/* Support IP reassembly on received packets */
+#define DPNI_OPT_IPR				0x00000800
+/* Support IP fragmentation on transmitted packets */
+#define DPNI_OPT_IPF				0x00001000
+/* VLAN manipulation support */
+#define DPNI_OPT_VLAN_MANIPULATION		0x00010000
+/* Support masking of QoS lookup keys */
+#define DPNI_OPT_QOS_MASK_SUPPORT		0x00020000
+/* Support masking of Flow Steering lookup keys */
+#define DPNI_OPT_FS_MASK_SUPPORT		0x00040000
+
 /**
  * struct dpni_ipr_cfg - Structure representing IP reassembly configuration
  * @max_reass_frm_size: Maximum size of the reassembled frame
@@ -492,6 +581,106 @@ struct dpni_ipr_cfg {
 };
 
 /**
+ * struct dpni_cfg - Structure representing DPNI configuration
+ * @mac_addr: Primary MAC address
+ * @adv: Advanced parameters; default is all zeros;
+ *		use this structure to change default settings
+ */
+struct dpni_cfg {
+	uint8_t mac_addr[6];
+	/**
+	 * struct adv - Advanced parameters
+	 * @options: Mask of available options; use 'DPNI_OPT_<X>' values
+	 * @start_hdr: Selects the packet starting header for parsing;
+	 *		'NET_PROT_NONE' is treated as default: 'NET_PROT_ETH'
+	 * @max_senders: Maximum number of different senders; used as the number
+	 *		of dedicated Tx flows; Non-power-of-2 values are rounded
+	 *		up to the next power-of-2 value as hardware demands it;
+	 *		'0' will be treated as '1'
+	 * @max_tcs: Maximum number of traffic classes (for both Tx and Rx);
+	 *		'0' will e treated as '1'
+	 * @max_dist_per_tc: Maximum distribution size per Rx traffic class;
+	 *			Must be set to the required value minus 1;
+	 *			i.e. 0->1, 1->2, ... ,255->256;
+	 *			Non-power-of-2 values are rounded up to the next
+	 *			power-of-2 value as hardware demands it
+	 * @max_unicast_filters: Maximum number of unicast filters;
+	 *			'0' is treated	as '16'
+	 * @max_multicast_filters: Maximum number of multicast filters;
+	 *			'0' is treated as '64'
+	 * @max_qos_entries: if 'max_tcs > 1', declares the maximum entries in
+	 *			the QoS	table; '0' is treated as '64'
+	 * @max_qos_key_size: Maximum key size for the QoS look-up;
+	 *			'0' is treated as '24' which is enough for IPv4
+	 *			5-tuple
+	 * @max_dist_key_size: Maximum key size for the distribution;
+	 *		'0' is treated as '24' which is enough for IPv4 5-tuple
+	 * @max_policers: Maximum number of policers;
+	 *		should be between '0' and max_tcs
+	 * @max_congestion_ctrl: Maximum number of congestion control groups
+	 *		(CGs); covers early drop and congestion notification
+	 *		requirements for traffic classes;
+	 *		should be between '0' and max_tcs
+	 * @ipr_cfg: IP reassembly configuration
+	 */
+	struct {
+		uint32_t		options;
+		enum net_prot		start_hdr;
+		uint8_t		max_senders;
+		uint8_t		max_tcs;
+		uint8_t			max_dist_per_tc[DPNI_MAX_TC];
+		uint8_t		max_unicast_filters;
+		uint8_t		max_multicast_filters;
+		uint8_t			max_vlan_filters;
+		uint8_t		max_qos_entries;
+		uint8_t		max_qos_key_size;
+		uint8_t		max_dist_key_size;
+		uint8_t		max_policers;
+		uint8_t		max_congestion_ctrl;
+		struct dpni_ipr_cfg	ipr_cfg;
+	} adv;
+};
+
+/**
+ * dpni_create() - Create the DPNI object
+ * @mc_io:	Pointer to MC portal's I/O object
+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
+ * @cfg:	Configuration structure
+ * @token:	Returned token; use in subsequent API calls
+ *
+ * Create the DPNI object, allocate required resources and
+ * perform required initialization.
+ *
+ * The object can be created either by declaring it in the
+ * DPL file, or by calling this function.
+ *
+ * This function returns a unique authentication token,
+ * associated with the specific object ID and the specific MC
+ * portal; this token must be used in all subsequent calls to
+ * this specific object. For objects that are created using the
+ * DPL file, call dpni_open() function to get an authentication
+ * token first.
+ *
+ * Return:	'0' on Success; Error code otherwise.
+ */
+int dpni_create(struct fsl_mc_io	*mc_io,
+		uint32_t		cmd_flags,
+		const struct dpni_cfg	*cfg,
+		uint16_t		*token);
+
+/**
+ * dpni_destroy() - Destroy the DPNI object and release all its resources.
+ * @mc_io:	Pointer to MC portal's I/O object
+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token:	Token of DPNI object
+ *
+ * Return:	'0' on Success; error code otherwise.
+ */
+int dpni_destroy(struct fsl_mc_io	*mc_io,
+		 uint32_t		cmd_flags,
+		 uint16_t		token);
+
+/**
  * struct dpni_pools_cfg - Structure representing buffer pools configuration
  * @num_dpbp: Number of DPBPs
  * @pools: Array of buffer pools parameters; The number of valid entries
diff --git a/include/fsl-mc/fsl_dprc.h b/include/fsl-mc/fsl_dprc.h
index b2cd2cb..a87179d 100644
--- a/include/fsl-mc/fsl_dprc.h
+++ b/include/fsl-mc/fsl_dprc.h
@@ -16,10 +16,13 @@
 /* Command IDs */
 #define DPRC_CMDID_CLOSE			0x800
 #define DPRC_CMDID_OPEN				0x805
+#define DPRC_CMDID_CREATE			0x905
 
 #define DPRC_CMDID_GET_ATTR			0x004
 #define DPRC_CMDID_RESET_CONT			0x005
 
+#define DPRC_CMDID_CREATE_CONT			0x151
+#define DPRC_CMDID_DESTROY_CONT			0x152
 #define DPRC_CMDID_GET_CONT_ID			0x830
 #define DPRC_CMDID_GET_OBJ_COUNT		0x159
 #define DPRC_CMDID_GET_OBJ			0x15A
@@ -40,6 +43,41 @@
 	MC_CMD_OP(cmd, 0, 0,  32, int,	    container_id)
 
 /*                cmd, param, offset, width, type, arg_name */
+#define DPRC_CMD_CREATE_CONTAINER(cmd, cfg) \
+do { \
+	MC_CMD_OP(cmd, 0, 32, 16, uint16_t, cfg->icid); \
+	MC_CMD_OP(cmd, 0, 0,  32, uint32_t, cfg->options); \
+	MC_CMD_OP(cmd, 1, 32, 32, int,	    cfg->portal_id); \
+	MC_CMD_OP(cmd, 2, 0,  8,  char,	    cfg->label[0]);\
+	MC_CMD_OP(cmd, 2, 8,  8,  char,	    cfg->label[1]);\
+	MC_CMD_OP(cmd, 2, 16, 8,  char,	    cfg->label[2]);\
+	MC_CMD_OP(cmd, 2, 24, 8,  char,	    cfg->label[3]);\
+	MC_CMD_OP(cmd, 2, 32, 8,  char,	    cfg->label[4]);\
+	MC_CMD_OP(cmd, 2, 40, 8,  char,	    cfg->label[5]);\
+	MC_CMD_OP(cmd, 2, 48, 8,  char,	    cfg->label[6]);\
+	MC_CMD_OP(cmd, 2, 56, 8,  char,	    cfg->label[7]);\
+	MC_CMD_OP(cmd, 3, 0,  8,  char,	    cfg->label[8]);\
+	MC_CMD_OP(cmd, 3, 8,  8,  char,	    cfg->label[9]);\
+	MC_CMD_OP(cmd, 3, 16, 8,  char,	    cfg->label[10]);\
+	MC_CMD_OP(cmd, 3, 24, 8,  char,	    cfg->label[11]);\
+	MC_CMD_OP(cmd, 3, 32, 8,  char,	    cfg->label[12]);\
+	MC_CMD_OP(cmd, 3, 40, 8,  char,	    cfg->label[13]);\
+	MC_CMD_OP(cmd, 3, 48, 8,  char,	    cfg->label[14]);\
+	MC_CMD_OP(cmd, 3, 56, 8,  char,	    cfg->label[15]);\
+} while (0)
+
+/*                cmd, param, offset, width, type, arg_name */
+#define DPRC_RSP_CREATE_CONTAINER(cmd, child_container_id, child_portal_offset)\
+do { \
+	MC_RSP_OP(cmd, 1, 0,  32, int,	   child_container_id); \
+	MC_RSP_OP(cmd, 2, 0,  64, uint64_t, child_portal_offset);\
+} while (0)
+
+/*                cmd, param, offset, width, type, arg_name */
+#define DPRC_CMD_DESTROY_CONTAINER(cmd, child_container_id) \
+	MC_CMD_OP(cmd, 0, 0,  32, int,	    child_container_id)
+
+/*                cmd, param, offset, width, type, arg_name */
 #define DPRC_CMD_RESET_CONTAINER(cmd, child_container_id) \
 	MC_CMD_OP(cmd, 0, 0,  32, int,	    child_container_id)
 
@@ -467,6 +505,52 @@ struct dprc_cfg {
 };
 
 /**
+ * dprc_create_container() - Create child container
+ * @mc_io:	Pointer to MC portal's I/O object
+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token:	Token of DPRC object
+ * @cfg:	Child container configuration
+ * @child_container_id:	Returned child container ID
+ * @child_portal_offset: Returned child portal offset from MC portal base
+ *
+ *
+ * Return:	'0' on Success; Error code otherwise.
+ */
+int dprc_create_container(struct fsl_mc_io	*mc_io,
+			  uint32_t		cmd_flags,
+			  uint16_t		token,
+			  struct dprc_cfg	*cfg,
+			  int			*child_container_id,
+			  uint64_t		*child_portal_offset);
+
+/**
+ * dprc_destroy_container() - Destroy child container.
+ * @mc_io:	Pointer to MC portal's I/O object
+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token:	Token of DPRC object
+ * @child_container_id:	ID of the container to destroy
+ *
+ * This function terminates the child container, so following this call the
+ * child container ID becomes invalid.
+ *
+ * Notes:
+ * - All resources and objects of the destroyed container are returned to the
+ * parent container or destroyed if were created be the destroyed container.
+ * - This function destroy all the child containers of the specified
+ *   container prior to destroying the container itself.
+ *
+ * warning: Only the parent container is allowed to destroy a child policy
+ *		Container 0 can't be destroyed
+ *
+ * Return:	'0' on Success; Error code otherwise.
+ *
+ */
+int dprc_destroy_container(struct fsl_mc_io	*mc_io,
+			   uint32_t		cmd_flags,
+			   uint16_t		token,
+			   int			child_container_id);
+
+/**
  * dprc_reset_container - Reset child container.
  * @mc_io:	Pointer to MC portal's I/O object
  * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
diff --git a/include/fsl-mc/fsl_mc.h b/include/fsl-mc/fsl_mc.h
index 9517a4a..ffe6da5 100644
--- a/include/fsl-mc/fsl_mc.h
+++ b/include/fsl-mc/fsl_mc.h
@@ -29,6 +29,9 @@
 	((void __iomem *)((uintptr_t)SOC_MC_PORTALS_BASE_ADDR + \
 	 (_portal_id) * SOC_MC_PORTAL_STRIDE))
 
+#define MC_PORTAL_OFFSET_TO_PORTAL_ID(_portal_offset) \
+	((_portal_offset) / SOC_MC_PORTAL_STRIDE)
+
 struct mc_ccsr_registers {
 	u32 reg_gcr1;
 	u32 reserved1;
@@ -50,7 +53,12 @@ struct mc_ccsr_registers {
 };
 
 int get_mc_boot_status(void);
+int get_dpl_apply_status(void);
+#ifdef CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET
+int get_aiop_apply_status(void);
+#endif
+u64 mc_get_dram_addr(void);
 unsigned long mc_get_dram_block_size(void);
 int fsl_mc_ldpaa_init(bd_t *bis);
-void fsl_mc_ldpaa_exit(bd_t *bis);
+int fsl_mc_ldpaa_exit(bd_t *bd);
 #endif
diff --git a/include/fsl-mc/fsl_mc_private.h b/include/fsl-mc/fsl_mc_private.h
index 9f06978..17e0611 100644
--- a/include/fsl-mc/fsl_mc_private.h
+++ b/include/fsl-mc/fsl_mc_private.h
@@ -13,18 +13,20 @@
 #include <linux/compat.h>
 #include <linux/types.h>
 #include <linux/stringify.h>
+#include <phy.h>
 
 #include <fsl-mc/fsl_mc_sys.h>
 #include <fsl-mc/fsl_mc_cmd.h>
 #include <fsl-mc/fsl_dprc.h>
 #include <fsl-mc/fsl_dpbp.h>
+#include <fsl-mc/fsl_dpni.h>
 
 extern struct fsl_mc_io *dflt_mc_io;
 
 /**
  * struct dpbp_node - DPBP strucuture
  * @uint16_t handle: DPBP object handle
- * @int dpbp_id: DPBP id
+ * @struct dpbp_attr: DPBP attribute
  */
 struct fsl_dpbp_obj {
 	uint16_t dpbp_handle;
@@ -40,11 +42,29 @@ extern struct fsl_dpbp_obj *dflt_dpbp;
  */
 struct fsl_dpio_obj {
 	int dpio_id;
+	uint16_t dpio_handle;
 	struct qbman_swp *sw_portal; /** SW portal object */
 };
 
 extern struct fsl_dpio_obj *dflt_dpio;
 
-int mc_init(void);
-int ldpaa_eth_init(struct dprc_obj_desc obj_desc);
+/**
+ * struct dpni_node - DPNI strucuture
+ * @int dpni_id: DPNI id
+ * @uint16_t handle: DPNI object handle
+ * @struct dpni_attr: DPNI attributes
+ * @struct dpni_buffer_layout: DPNI buffer layout
+ */
+struct fsl_dpni_obj {
+	int dpni_id;
+	uint16_t dpni_handle;
+	struct dpni_attr dpni_attrs;
+	struct dpni_buffer_layout buf_layout;
+};
+
+extern struct fsl_dpni_obj *dflt_dpni;
+
+int mc_init(u64 mc_fw_addr, u64 mc_dpc_addr);
+int ldpaa_eth_init(int dpmac_id, phy_interface_t enet_if);
+int mc_apply_dpl(u64 mc_dpl_addr);
 #endif /* _FSL_MC_PRIVATE_H_ */
diff --git a/include/fsl-mc/ldpaa_wriop.h b/include/fsl-mc/ldpaa_wriop.h
index ca8e440..6dc159d 100644
--- a/include/fsl-mc/ldpaa_wriop.h
+++ b/include/fsl-mc/ldpaa_wriop.h
@@ -40,8 +40,8 @@ enum wriop_port {
 struct wriop_dpmac_info {
 	u8 enabled;
 	u8 id;
-	u8 phy_addr;
 	u8 board_mux;
+	int phy_addr;
 	void *phy_regs;
 	phy_interface_t enet_if;
 	struct phy_device *phydev;
@@ -56,6 +56,7 @@ extern struct wriop_dpmac_info dpmac_info[NUM_WRIOP_PORTS];
 void wriop_init_dpmac(int, int, int);
 void wriop_disable_dpmac(int);
 void wriop_enable_dpmac(int);
+u8 wriop_is_enabled_dpmac(int dpmac_id);
 void wriop_set_mdio(int, struct mii_dev *);
 struct mii_dev *wriop_get_mdio(int);
 void wriop_set_phy_address(int, int);
diff --git a/include/fsl_ddr.h b/include/fsl_ddr.h
index 1ac092b..9aaf6b3 100644
--- a/include/fsl_ddr.h
+++ b/include/fsl_ddr.h
@@ -131,6 +131,7 @@ void board_add_ram_info(int use_default);
 /* processor specific function */
 void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 				   unsigned int ctrl_num, int step);
+void remove_unused_controllers(fsl_ddr_info_t *info);
 
 /* board specific function */
 int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
diff --git a/include/linux/usb/xhci-fsl.h b/include/linux/usb/xhci-fsl.h
index 602a413..e922e32 100644
--- a/include/linux/usb/xhci-fsl.h
+++ b/include/linux/usb/xhci-fsl.h
@@ -54,11 +54,18 @@ struct fsl_xhci {
 #if defined(CONFIG_LS102XA)
 #define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_LS102XA_XHCI_USB1_ADDR
 #define CONFIG_SYS_FSL_XHCI_USB2_ADDR 0
-#elif defined(CONFIG_LS2085A)
-#define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_LS2085A_XHCI_USB1_ADDR
-#define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_LS2085A_XHCI_USB2_ADDR
+#define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0
+#elif defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
+#define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_LS2080A_XHCI_USB1_ADDR
+#define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_LS2080A_XHCI_USB2_ADDR
+#define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0
+#elif defined(CONFIG_LS1043A)
+#define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_LS1043A_XHCI_USB1_ADDR
+#define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_LS1043A_XHCI_USB2_ADDR
+#define CONFIG_SYS_FSL_XHCI_USB3_ADDR CONFIG_SYS_LS1043A_XHCI_USB3_ADDR
 #endif
 
 #define FSL_USB_XHCI_ADDR	{CONFIG_SYS_FSL_XHCI_USB1_ADDR, \
-					CONFIG_SYS_FSL_XHCI_USB2_ADDR}
+					CONFIG_SYS_FSL_XHCI_USB2_ADDR, \
+					CONFIG_SYS_FSL_XHCI_USB3_ADDR}
 #endif /* _ASM_ARCH_XHCI_FSL_H_ */