summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* powerpc/b4860qds: add xfi supportShaohui Xie2014-12-05-8/+42
| | | | | | | | | | We need following changes to make xfi work on B4: 1. set cross-point switch VSC3308 to use sfp config when running xfi; 2. add 10G interface check for xfi; 3. set phy address for xfi so the 10G ports can be registered by mdio; Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* B4860: Add alternate LC VCO serdes protocols support in board fileShaveta Leekha2014-12-05-0/+13
| | | | | | | | | Add the support of newly added LC VCO SerDes protocols for configuration of IDT and VSC crossbar Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* B4860QDS: SGMII related updatesShaveta Leekha2014-12-05-28/+40
| | | | | | | | | | | | | | - Enable SGMII support for 0x8d Serdes 2 protocol. - Correct Phy address for DTSECx for 0x8d/0xb2 Serdes 2 protocol. - Updated debug statement - Add Alternate LC VCO protocols(0x8d-->0x8c, 0xb2-->0xb1) - Rename onboard PHY address defines for more readability - Add these new Defines in B4860QDS.h file Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Suresh Gupta <suresh.gupta@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* 85xx/b4860: Add alternate serdes protocols for B4860/B4420Shaveta Leekha2014-12-05-0/+19
| | | | | | | | | | | | | | | | Addded Alternate options with LC VCO for following protocols: 0x02 --> 0x01 0x08 --> 0x07 0x18 --> 0x17 0x1E --> 0x1D 0x49 --> 0x48 0x6F --> 0x6E 0x9A --> 0x99 0x9E --> 0x9D Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/b4860: Enable law creation of MAPLEShaveta Leekha2014-12-05-3/+8
| | | | | | | | | B4860, B4440, B4420 and B4220 have MAPLE, so enable law creation for them only. Remove static LAW creation for MAPLE. Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Signed-off-by: Sandeep Singh <Sandeep@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/t104x: Convert to use generic board codevijay rai2014-12-05-0/+4
| | | | | | | Convert T1040QDS and T1040RDB to use generic board code. Signed-off-by: Vijay Rai <vijay.rai@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* net/phy: Add support for CS4315/CS4340 PHYShengzhou Liu2014-12-05-0/+414
| | | | | | | | | | | | Add support for Cortina CS4315/CS4340 10G PHY. - This driver loads CS43xx firmware from NOR/NAND/SPI/SD device to initialize Cortina PHY. - Cortina PHY has non-standard offset of PHY ID registers, thus we define own get_phy_id() to override default get_phy_id(). - To define macro CONFIG_PHY_CORTINA will enable this driver. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* driver/ddr/fsl: Adjust timing_cfg_0 to better support two DDR slotsYork Sun2014-12-05-6/+25
| | | | | | | | | Increase write-to-write and read-to-read turnaround time for two-slot DDR configurations. Previously only quad-rank and two dual-rank configurations have this additional turnaround time. A recent test on two single-rank DIMMs shows the shorter additional turnaround time is also needed. Signed-off-by: York Sun <yorksun@freescale.com>
* powerpc/c29xpcie: Enable configs to use generic board codeChunhe Lan2014-12-05-0/+2
| | | | | | | | | | | Add configs: o CONFIG_SYS_GENERIC_BOARD o CONFIG_DISPLAY_BOARDINFO in C29XPCIE config header file to use U-boot generic board code. Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/p1023rdb: Enable configs to use generic board codeChunhe Lan2014-12-05-0/+3
| | | | | | | | | | | Add configs: o CONFIG_SYS_GENERIC_BOARD o CONFIG_DISPLAY_BOARDINFO in P1023RDB config header file to use U-boot generic board code. Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* mpc85xx/p1022ds: convert to generic boardTang Yuantian2014-12-05-0/+3
| | | | | Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc, muas3001: remove CONFIG_SYS_RAMBOOTHeiko Schocher2014-12-05-8/+0
| | | | | | | | | | | | cppcheck reports: [board/muas3001/muas3001.c:270]: (error) Uninitialized variable: psize remove the CONFIG_SYS_RAMBOOT define to prevent this error report. Signed-off-by: Heiko Schocher <hs@denx.de> Reported-by: Wolfgang Denk <wd@denx.de> Reviewed-by: York Sun <yorksun@freescale.com>
* km/km82xx: remove CONFIG_SYS_RAMBOOTHolger Brunck2014-12-05-5/+0
| | | | | | | | | | | | This define is never set in our setup, so we can remove it safely. The former code causes cppcheck to complain about: [board/keymile/km82xx/km82xx.c:311]: (error) Uninitialized variable: psize Signed-off-by: Holger Brunck <holger.brunck@keymile.com> cc: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Wolfgang Denk <wd@denx.de> Reviewed-by: York Sun <yorksun@freescale.com>
* board/freescale: use generic board architecture for p1010rdbYing Zhang2014-12-05-0/+2
| | | | | | | | Use generic board architecture for p1010rdb, tested with NOR boot on p1010rdb-pb. Signed-off-by: Ying Zhang <b40530@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/P5040DS: enable SATA supportShaohui Xie2014-12-05-0/+1
| | | | | | | | The define CONFIG_FSL_SATA_V2 is missing, so SATA is not available in U-boot. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* board/freescale: use generic board architecture for p1025-twrYing Zhang2014-12-05-0/+2
| | | | | | | | Use generic board architecture for p1025-twr, tested with NOR boot and NAND boot on p1025-twr. Signed-off-by: Ying Zhang <b40530@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/t208xqds: VID supportYing Zhang2014-12-05-0/+542
| | | | | | | | | | | | The fuse status register provides the values from on-chip voltage ID efuses programmed at the factory. These values define the voltage requirements for the chip. u-boot reads FUSESR and translates the values into the appropriate commands to set the voltage output value of an external voltage regulator. Signed-off-by: Ying Zhang <b40530@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/mpc85xx: modify erratum A007186Zhao Qiang2014-12-05-2/+28
| | | | | | | | | | | T2080 v1.0 has this errata while v1.1 has fixed this errata by hardware, add a new function has_errata_a007186 to check the SVR_SOC_VER, SVR_MAJ and SVR_MIN first, if the sil has errata a007186, then run the errata code, if not, doesn't run the code. Signed-off-by: Zhao Qiang <B45475@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* board/t104xrdb: Conditional workaround of errata A-008044Prabhakar Kushwaha2014-12-05-9/+16
| | | | | | | | | | Workaround of Errata A-008044 was implemented without errata number and it is enabled by default. Errata A-008044 is only valid for T1040 Rev 1.0. So put errata number and make it conditional. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/mpc85xx:Put errata number for T104x NAND boot issuePrabhakar Kushwaha2014-12-05-4/+20
| | | | | | | | | | | | When device is configured to load RCW from NAND flash IFC_A[16:31] are driven low after RCW loading. Hence Devices connected on IFC_CS[1:7] and using IFC_A[16:31] lines are not accessible. Workaround is already in-place. Put the errata number to adhere errata handling framework. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/t1040qds: Update DDR optionYork Sun2014-12-05-3/+2
| | | | | | | | | Enable interactive debugging by default. Remove DDR controller interleaving because this SoC only has one controller. Use auto chip-select interleaving to detect number of ranks. Signed-off-by: York Sun <yorksun@freescale.com> CC: Poonam Aggrwal <poonam.aggrwal@freescale.com>
* mpc85xx/t2080: Fix parsing DDR ratio for new revisionYork Sun2014-12-05-3/+20
| | | | | | | | T2080 rev 1.1 changes MEM_RAT in RCW, which requires new parsing for ratio, the same way as T4240 rev 2.0. Signed-off-by: York Sun <yorksun@freescale.com> CC: Shengzhou Liu <Shengzhou.Liu@freescale.com>
* mpc85xx/t208xqds: Adjust DDR timing parametersYork Sun2014-12-05-9/+8
| | | | | | | | | | | Adjust timing for dual-rank UDIMM, verified on M3CQ-8GHS3C0E for speed of 1066, 1333, 1600, 1866MT/s. The 1866 timing is copied to 2133 timing in case such DIMM comes available. Also update single-rank 1866 timing. Enable interactive debugging as well. Signed-off-by: York Sun <yorksun@freescale.com> CC: Shengzhou Liu <Shengzhou.Liu@freescale.com>
* powerpc/t2080: add serdes2 protocol 0x2eShengzhou Liu2014-12-05-0/+1
| | | | | | | Add serdes2 protocol 0x2e. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* Freescale t104x: Do not exclude SGMIIJoakim Tjernlund2014-12-05-4/+0
| | | | | | | | | | | | fman_port_enet_if() tests if FM1_DTSEC2 or FM1_DTSEC4 uses RGMII or MII and if not returns PHY_INTERFACE_MODE_NONE. This excludes testing for SGMII further down. Remove the unconditional "else return PHY_INTERFACE_MODE_NONE" so SGMII can be tested too. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Reviewed-by: York Sun <yorksun@freescale.com>
* common: spl: Add interactive DDR debugger support for SPL imageAlison Wang2014-12-05-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | To support interactive DDR debugger, cli_simple.o, cli.o, cli_readline.o, command.o, s_record.o, xyzModem.o and cmd_disk.o are all needed for drivers/ddr/fsl/interactive.c. In current common/Makefile, the above .o files are only produced when CONFIG_SPL_BUILD is disabled. For LS102xA, interactive DDR debugger is needed in SD/NAND boot too, and I enabled CONFIG_FSL_DDR_INTERACTIVE. But according to the current common/Makfile, all the above .o files are not produced in SPL part because CONFIG_SPL_BUILD is enabled in SPL part, the following error will be shown, drivers/ddr/fsl/built-in.o: In function `fsl_ddr_interactive': /home/wangh/layerscape/u-boot/drivers/ddr/fsl/interactive.c:1871: undefined reference to `cli_readline_into_buffer' /home/wangh/layerscape/u-boot/drivers/ddr/fsl/interactive.c:1873: undefined reference to `cli_simple_parse_line' make[1]: *** [spl/u-boot-spl] Error 1 make: *** [spl/u-boot-spl] Error 2 So this patch fixed this issue and the above .o files will be produced no matter CONFIG_SPL_BUILD is enabled or disabled. Signed-off-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* Merge branch 'master' of git://git.denx.de/u-boot-mipsTom Rini2014-11-27-330/+45
|\
| * MIPS: bootm: remove unused or redundant header filesDaniel Schwierzeck2014-11-27-3/+0
| | | | | | | | Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
| * MIPS: bootm: add missing initramfs relocationDaniel Schwierzeck2014-11-27-0/+20
| | | | | | | | | | | | | | | | | | The initramfs is currently only relocated if the user calls the bootm ramdisk subcommand. If bootm should be used without subcommands, the arch-specific bootm code needs to implement the relocation. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
| * MIPS: remove board.cDaniel Schwierzeck2014-11-27-323/+0
| | | | | | | | | | | | | | After all MIPS boards are switched to generic-board, the MIPS specific board.c can be removed. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
| * MIPS: vct: switch to generic boardDaniel Schwierzeck2014-11-27-0/+3
| | | | | | | | | | Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Acked-by: Stefan Roese <sr@denx.de>
| * MIPS: qemu_mips: switch to generic boardDaniel Schwierzeck2014-11-27-0/+6
| | | | | | | | Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
| * MIPS: pb1x00: switch to generic boardDaniel Schwierzeck2014-11-27-0/+3
| | | | | | | | Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
| * MIPS: dbau1x00: switch to generic boardDaniel Schwierzeck2014-11-27-0/+3
| | | | | | | | Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
| * MIPS: fix setup of initial stack frameDaniel Schwierzeck2014-11-27-4/+10
| | | | | | | | | | | | | | | | | | To get correct stack walking and backtrace functionality in gdb, registers fp and ra should be initialized before calling board_init_f or board_init_r. Thus allocating stack space and zeroing it as it is currently done in board.c becomes obsolete. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* | mtd: nand: s3c: Unify the register definition and namingMarek Vasut2014-11-26-39/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge struct s3c2410_nand and struct s3c2440_nand into one unified struct s3c24x0_nand. While at it, fix up and rename the functions to retrieve the NAND base address and fix up the s3c NAND driver to reflect this change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Vladimir Zapolskiy <vz@mleia.com>
* | mtd/nand/vf610_nfc: Disable subpage writesSanchayan Maity2014-11-26-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | This patch disables subpage writes for vf610_nfc nand driver. This is required, as without this fix, writing unaligned u-boot images with DFU results in a hang. Trying to write unalgined binary images also results in a hang, without disabling subpage writes. Patch has been tested on a Colibri VF61 module. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
* | mtd: denali: set some registers after nand_scan_ident()Masahiro Yamada2014-11-26-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some but not all of implementations of the Denali NAND controller have hardware circuits to detect the device parameters such as page_size, erase_size, etc. Even on those SoCs with such hardware supported, the hardware is known to detect wrong parameters for some nasty (almost buggy) NAND devices. The device parameters detected during nand_scan_ident() are more trustworthy. This commit sets some hardware registers to mtd->pagesize, mtd->oobsize, etc. in the code between nand_scan_ident() and nand_scan_tail(). Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Chin Liang See <clsee@altera.com>
* | mtd: denali: use CONFIG_SYS_NAND_SELF_INITMasahiro Yamada2014-11-26-40/+93
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some variants of the Denali NAND controller need some registers set up based on the device information that has been detected during nand_scan_ident(). CONFIG_SYS_NAND_SELF_INIT has to be defined to insert code between nand_scan_ident() and nand_scan_tail(). It is also helpful to reduce the difference between this driver and its Linux counterpart because this driver was ported from Linux. Moreover, doc/README.nand recommends to use CONFIG_SYS_NAND_SELF_INIT. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Chin Liang See <clsee@altera.com>
* | nand: reinstate lazy bad block scanningRostislav Lisovy2014-11-26-3/+7
|/ | | | | | | | | | | | | | | Commit ff94bc40af3481d47546595ba73c136de6af6929 ("mtd, ubi, ubifs: resync with Linux-3.14") accidentally reverted part of the commit 13f0fd94e3cae6f8a0d9fba5d367e311edc8ebde ("NAND: Scan bad blocks lazily."). Reinstate the change as by commit fb49454b1b6c7c6e238ac3c0b1e302e73eb1a1ea ("nand: reinstate lazy bad block scanning") Signed-off-by: Rostislav Lisovy <lisovy@merica.cz> Acked-by: Heiko Schocher <hs@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2014-11-26-71/+335
|\
| * arm: ls102xa: Select ge2_clk125 for eTSEC clock muxingAlison Wang2014-11-24-0/+1
| | | | | | | | | | | | | | | | | | | | EC1 pins in RCW can be selected as RGMII1, GPIO3, CAN1/2, FTM1 or SAI1/2. There is a bug that EC3 RGMII could not work when selecting EC1 as other functionality except RGMII. The workaround is to select ge2_clk125 for eTSEC clock muxing in register SCFG_ETSECCMCR. Signed-off-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * arm: ls102xa: Add SystemID EEPROM support for LS1021ATWR boardAlison Wang2014-11-24-2/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SystemID information could be read through I2C1 from EEPROM on LS1021ATWR board. As LS1 is a little-endian processor, getting the version ID by be32_to_cpu() is wrong. Fix it by using e.version directly. This change will be compatible for both ARM and PowerPC. As there is an errata that I2C1 could not work in SD boot, reading EEPROM through I2C1 is disabled too in SD boot. Signed-off-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * ls102xa: ifc: nor: fix the write issue when bytes unalignedYuan Yao2014-11-24-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Add define CONFIG_SYS_WRITE_SWAPPED_DATA. For LS1021AQDS and LS1021QTWR nor flash write should swap the bytes when handle unaligned tail bytes. Because of the ending, if the date bus width is 16-bits and the number of bytes is odd, we should swap the byte when write the last one. Signed-off-by: Yuan Yao <yao.yuan@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * arm: ls102xa: Remove bit reversing for SCFG registersAlison Wang2014-11-24-9/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SCFG_SCFGREVCR is SCFG bit reverse register. This register must be written with 0xFFFFFFFF before writing to any other SCFG register. Then other SCFG register could be written in big-endian mode. Address: 157_0000h base + 200h offset = 157_0200h Bit 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15|16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 W/R SCFGREV Reset 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0-31 SCFGREV SCFG Bit Reverse Control Filed 32'h 0000_0000 - No bit reverse is applied 32'h FFFF_FFFF - Bit reverse is applied; so 31:0 will be stored/read as 0:31 This patch removes the bit reversing for SCFG registers in u-boot. It will be implemented through PBI commands in RCW .pbi write 0x570200, 0xffffffff .end So other SCFG register could be written in big-endian mode in u-boot or kernel directly. Signed-off-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * arm: ls102xa: Add snoop disable for slave port 0, 1 and 2Jason Jin2014-11-24-0/+18
| | | | | | | | | | | | | | | | | | Disable the snoop for slave interface 0, 1 and 2 to avoid the interleaving on the CCI400 BUS. Signed-off-by: Jason Jin <Jason.Jin@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * ls1: config: Enable USB EHCI Host on LS1021AQDSNikhil Badola2014-11-24-0/+17
| | | | | | | | | | | | | | Enable USB EHCI Host on LS1021AQDS Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * drivers: usb: fsl: Define USB configs for LS102XANikhil Badola2014-11-24-0/+7
| | | | | | | | | | | | | | | | Define USB configs for LS1021XA such as CONFIG_SYS_FSL_USB1_ADDR, CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * drivers : usb: fsl: Implement usb Erratum A007798 workaroundNikhil Badola2014-11-24-2/+17
| | | | | | | | | | | | | | | | Set TXFIFOTHRESH to adjust ddr pipeline delay for successful large usb writes Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * drivers: usb: fsl: Move USB Errata checking codeNikhil Badola2014-11-21-56/+68
| | | | | | | | | | | | | | | | | | | | Move USB Errata checking code from "arch/powerpc" to architecture independent file "fsl_usb.h" so that errata(s) become independent of the architecture. For each erratum checking function for PPC arch, define a nop function for non PPC arch for successful compilation in either case Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
generated by cgit v1.1 at 2024-11-02 01:31:02 +0000