summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* sbc8641d: enable command line editingPaul Gortmaker2015-10-19-0/+1
| | | | | | It is just too painful to use interactively without it. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* image-fit: Fix signature checkingAndrej Rosano2015-10-19-1/+3
| | | | | | | On signature verification failures fit_image_verify() should exit with error. Signed-off-by: Andrej Rosano <andrej@inversepath.com>
* igep00x0: Use BCH8 ECCLadislav Michl2015-10-19-5/+13
| | | | | | | | Used NAND chips requires at least 4-bit error correction, so use BCH8 as it is what kernel uses. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Acked-by: Javier Martinez Canillas <javier@osg.samsung.com>
* vexpress64: Juno: Add initialisation code for Juno R1 PCIe host bridge.Liviu Dudau2015-10-19-1/+206
| | | | | | | | | | | | | Juno R1 has an XpressRICH3 PCIe host bridge that needs to be initialised in order for the Linux kernel to be able to enumerate the bus. Add support code here that enables the host bridge, trains the links and sets up the Address Translation Tables. Signed-off-by: Liviu Dudau <Liviu.Dudau@foss.arm.com> Tested-by: Ryan Harkin <ryan.harkin@linaro.org> [trini: Always declare vexpress64_pcie_init and continue handling logic inside the function] Signed-off-by: Tom Rini <trini@konsulko.com>
* vexpress64: Juno: Declare all 8GB of RAM and make them visible to the kernel.Liviu Dudau2015-10-19-1/+11
| | | | | | | | | | Juno comes with 8GB RAM, but U-Boot only passes 2GB to the kernel. Declare a secondary memory bank and set the sizes correctly. Signed-off-by: Liviu Dudau <Liviu.Dudau@foss.arm.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org> Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
* dfu: dfu_sf: Take the start address into accountFabio Estevam2015-10-19-2/+10
| | | | | | | | | | | | | | | | | | | | The dfu_alt_info_spl variable allows passing a starting point for the binary to be flashed in the SPI NOR. For example, if we have 'dfu_alt_info_spl=spl raw 0x400', this means that we want to flash the binary starting at address 0x400. In order to do so we need to erase the entire sector and write to the the subsequent SPI NOR sectors taking such start address into account for the address calculations. Tested by succesfully writing SPL binary into 0x400 offset and the u-boot.img at offset 64 kiB of a SPL NOR. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> [trini: Use lldiv for the math] Signed-off-by: Tom Rini <trini@konsulko.com>
* dfu: dfu_sf: Use the erase sector size for erase operationsFabio Estevam2015-10-19-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | SPI NOR flashes need to erase the entire sector size and we cannot pass any arbitrary length for the erase operation. To illustrate the problem: Copying data from PC to DFU device Download [=========================] 100% 478208 bytes Download done. state(7) = dfuMANIFEST, status(0) = No error condition is present state(10) = dfuERROR, status(14) = Something went wrong, but the device does not know what it was Done! In this case, the binary has 478208 bytes and the M25P32 SPI NOR has an erase sector of 64kB. 478208 = 7 entire sectors of 64kiB + 19456 bytes. Erasing the first seven 64 kB sectors works fine, but when trying to erase the remainding 19456 causes problem and the board hangs. Fix the issue by always erasing with the erase sector size. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
* doc/README.scrapyard: Add more entriesTom Rini2015-10-19-0/+71
| | | | | | | - Add deletions from August 30 2015. - A few from Sept 12, one from Oct 2nd. Signed-off-by: Tom Rini <trini@konsulko.com>
* Revert "arm: Remove inetspace_v2_cmc board"Tom Rini2015-10-19-0/+8
| | | | | | | | | Upon further review when populating README.scrapyard, inetspace_v2_cmc is a variant on netspace_v2 and not just an orphan config. This reverts commit 653600a715db49859c06ba5dfb858c15c4108d54. Signed-off-by: Tom Rini <trini@konsulko.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2015-10-19-2/+8
|\
| * ARM: rpi: add another revision of Raspberry Pi A+Lubomir Rintel2015-10-19-0/+6
| | | | | | | | | | | | | | | | Seen this one in the wild. Is labelled "Raspberry Pi Model A+ V1.1, (C) Raspberry Pi 2014". A standard A+ board, much like the one with version 0x12, didn't notice any differencies. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
| * ARM: dockstar: move start of environment areaEric Cooper2015-10-19-2/+2
| | | | | | | | | | | | | | | | | | The default dockstar configuration for U-Boot currently causes it to overrun the environment area, so that a "saveenv" command bricks the device. This patch moves the environment to a higher address to avoid that. Signed-off-by: Eric Cooper <ecc@cmu.edu>
* | Revert "arm: Remove d2net_v2 defconfig file"Tom Rini2015-10-19-5/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | Upon further review when populating README.scrapyard, d2net_v2 is a variant on net2big_v2 and not just an orphan config. To help in the future also add this to board/LaCie/net2big_v2/MAINTAINERS which needed a little consolidation anyhow. This reverts commit 1363740e7948a8e4bee8d5adcdf0f63f7782879d. Cc: Simon Guinot <simon.guinot@sequanux.org> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* | doc/README.scrapyard: Populate recent removalsTom Rini2015-10-19-9/+9
| | | | | | | | | | | | Add in the commit IDs / dates for boards removed on Sept 2nd. Signed-off-by: Tom Rini <trini@konsulko.com>
* | ARM: k2e/l: Apply WA for selecting PA clock sourceLokesh Vutla2015-10-17-3/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On keystone2 Lamarr and Edison platforms, the PA clocksource mux in PLL REG1, can be changed only after enabling its clock domain. So selecting the output of PASS PLL as input to PA only after enabling the clockdomain. This is as per the debug done by "Vitaly Andrianov <vitalya@ti.com>" and based on the previous work done by "Hao Zhang <hzhang@ti.com>" Fixes: d634a0775bcf ("ARM: keystone2: Cleanup PLL init code") Reported-by: Vitaly Andrianov <vitalya@ti.com> Tested-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | arch/powerpc/config.mk: Pass -fno-ira-hoist-pressure when possibleTom Rini2015-10-17-1/+2
|/ | | | | | | | | There are various toolchain issues that cause us to produce invalid binaries with certain gcc 4.8.x and 4.9.x versions when we don't pass this flag in. Tested-by: Joakim Tjernlund <joakim.tjernlund@transmode.se> Signed-off-by: Tom Rini <trini@konsulko.com>
* Merge git://git.denx.de/u-boot-socfpgaTom Rini2015-10-16-0/+17
|\
| * arm: dts: socfpga: add "u-boot,dm-pre-reloc" to socfpga_cyclone5_socdk dtsDinh Nguyen2015-10-17-0/+3
| | | | | | | | | | | | | | We need "u-boot,dm-pre-reloc" in the socfpga_cyclone5_socdk.dts file in order for the SPL to use SD/MMC. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
| * arm: socfpga: enable data/inst prefetch and shared override in the L2Dinh Nguyen2015-10-17-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the L2 AUX CTRL settings for the SoCFPGA. Enabling D and I prefetch bits helps improve SDRAM performance on the platform. Also, we need to enable bit 22 of the L2. By not having bit 22 set in the PL310 Auxiliary Control register (shared attribute override enable) has the side effect of transforming Normal Shared Non-cacheable reads into Cacheable no-allocate reads. Coherent DMA buffers in Linux always have a Cacheable alias via the kernel linear mapping and the processor can speculatively load cache lines into the PL310 controller. With bit 22 cleared, Non-cacheable reads would unexpectedly hit such cache lines leading to buffer corruption. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* | vf610twr: Fix typo in DRAM initAnthony Felice2015-10-16-1/+1
| | | | | | | | | | | | | | | | | | This commit fixes a typo in vf610twr DRAM init that was causing a hang in U-Boot for the Vybrid Tower. This typo was introduced in commit 3f353cecc (vf610: refactor DDRMC code). Signed-off-by: Anthony Felice <tony.felice@timesys.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-samsungTom Rini2015-10-16-24/+42
|\ \
| * | exynos: more debug and cleanup in do_sdhci_init()Tobias Jakobi2015-10-13-9/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add more debug printfs in do_sdhci_init() for calls that can potentially fail. Acked-by: Przemyslaw Marczak <p.marczak@samsung.com> Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | exynos: be more verbose in process_nodes()Tobias Jakobi2015-10-13-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | In case sdhci_get_config() or do_sdhci_init() fail, show the error code that was returned. Acked-by: Przemyslaw Marczak <p.marczak@samsung.com> Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | exynos: Fix passing of errors in exynos_mmc_init()Tobias Jakobi2015-10-13-6/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | exynos_mmc_init() always returns zero, so for the caller it looks like it never fails. Correct this by returning the error code of process_nodes(). For process_nodes() do something similar and return early when do_sdhci_init() fails. v2: Only fail in process_nodes() if we fail on all available nodes. Acked-by: Przemyslaw Marczak <p.marczak@samsung.com> Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | exynos: Properly zero initialize host in s5p_sdhci_init()Tobias Jakobi2015-10-13-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | This makes sure that setting the host_caps in s5p_sdhci_core_init() doesn't operate on potentially uninitialized memory. Acked-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | odroid: Add boot script (boot.scr) supportGuillaume GARDET2015-10-13-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add boot script (boot.scr) support. If no boot script are found, it boots as usual. Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Tested-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | odroid: replace 'fatload' with 'load' to be able to use EXT* partitionsGuillaume GARDET2015-10-13-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace 'fatload' command by 'load', to be able to use EXT* partitions while keeping FAT partition compatibility. Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Tested-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | | arm: mmu: Add missing volatile for reading SCTLR registerAlison Wang2015-10-16-1/+1
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | Add 'volatile' qualifier to the asm statement in get_cr() so that the statement is not optimized out by the compiler. (http://comments.gmane.org/gmane.linux.linaro.toolchain/5163) Without the 'volatile', get_cr() returns a wrong value which prevents enabling the MMU and later causes a PCIE VA access failure. Signed-off-by: Alison Wang <alison.wang@freescale.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2015-10-15-27/+55
|\ \
| * | armv8/gic: Fix GIC v2 initializationThierry Reding2015-10-15-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Initialize all GICD_IGROUPRn registers and set up GICC_CTLR to enable interrupts to the primary CPU. This fixes issues seen after booting a Linux kernel from U-Boot. Suggested-by: Marc Zyngier <marc.zyngier@arm.com> Suggested-by: Mark Rutland <mark.rutland@arm.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
| * | armv8/mmu: Set bits marked RES1 in TCRThierry Reding2015-10-15-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For EL3 and EL2, the documentation says that bits 31 and 23 are reserved but should be written as 1. For EL1, only bit 23 is not reserved, so only write bit 31 as 1. Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
| * | armv8/mmu: Clean up TCR programmingThierry Reding2015-10-15-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Use the inner shareable attribute for memory, which makes more sense considering that this code is called when caches are being enabled. Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
| * | Merge remote-tracking branch 'u-boot/master'Albert ARIBAUD2015-10-14-39273/+29224
| |\ \
| * | | arm: armv8 correct value passed to __asm_dcache_allPeng Fan2015-09-12-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | >From source code comments: "x0: 0 flush & invalidate, 1 invalidate only" Current value 0xffff can make invalidate work, since we only judge whether input value is 0 or not, see following code: " tbz w1, #0, 1f dc isw, x9 b 2f 1: dc cisw, x9 /* clean & invalidate by set/way */ 2: subs x6, x6, #1 /* decrement the way */ " Later we may add "2 clean only" support. So following the comments, correct value from 0xffff to 1. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: York Sun <yorksun@freescale.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net>
| * | | arm: Correct comments in crt0.S for the recent SPL improvementsSimon Glass2015-09-12-20/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current comments need a bit of tweaking since we now support stack and global_data relocation in SPL. Also add a reference to the README. For AArch64 this is not implemented, so leave a TODO for this. Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Tim Harvey <tharvey@gateworks.com>
* | | | pci: pcie_imx: Fix hang on mx6qpFabio Estevam2015-10-15-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PCI driver currently hangs on mx6qp. Toggle the reset bit with the appropriate timings to fix the issue. Based on the FSL kernel driver implementation. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
* | | | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-10-15-116/+160
|\ \ \ \
| * | | | arm: vf610twr: improve memory layoutStefan Agner2015-10-15-6/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the device tree relocation is disabled, likely to keep some DDR3 RAM at the end for Cortex-M4 firmwares. This can be archived using bootm_size, which limits the image processing range of the boot commands. Move the device tree standard load address to a higher address which aligns better with what we are doing on other boards. Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
| * | | | colibri_vf: Fix bstlen fieldFabio Estevam2015-10-15-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 3f353cecc ("vf610: refactor DDRMC code") changed the original bstlen field from 3 to 0. Restore the original value for proper behaviour. Based on the patch from Anthony Felice <tony.felice@timesys.com> for the vf610twr board. Reported-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * | | | mtd: nand: vf610_nfc: resync with upstream Linux versionStefan Agner2015-10-15-109/+138
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This resyncs the driver changes with the Linux version of the driver. The driver received some feedback in the LKML and got recently acceppted, the latest version can be found here: https://lkml.org/lkml/2015/9/2/678 Notable changes are: - On ECC error, reread OOB and count bit flips in OOB too. If flipped bits are below threshold, also return an empty OOB buffer. - Return the amount of bit flips in vf610_nfc_read_page. - Use endianness aware vf610_nfc_read to read ECC status. - Do not enable IDLE IRQ (since we do not operate with an interrupt service routine). - Use type safe struct for buffer variants (vf610_nfc_alt_buf). - Renamed variables in struct vf610_nfc (column and page_sz) to reflect better what they really representing. The U-Boot version currently does not support RAW NAND write when using the HW ECC engine. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Tested-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr> Tested-by: Stefan Agner <stefan@agner.ch> Acked-by: Scott Wood <scottwood@freescale.com>
* | | | | ARM: uniphier: fix address mapping in README.uniphierMasahiro Yamada2015-10-15-4/+4
| |_|/ / |/| | | | | | | | | | | Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | | | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-10-13-25/+64
|\ \ \ \ | |/ / / | | | / | |_|/ |/| |
| * | imximage: fix commands other than write_dataTroy Kisky2015-10-07-23/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | When CHECK_BITS_SET was added, they forgot to add a new command table, and instead overwrote the previous table. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
| * | imximage: header.length of 4 is validTroy Kisky2015-10-07-2/+2
| | | | | | | | | | | | Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
* | | ls102xa: Fix reset hangFabio Estevam2015-10-12-1/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 623d96e89aca6("imx: wdog: correct wcr register settings") issuing a 'reset' command causes the system to hang. Unlike i.MX and Vybrid, the watchdog controller on LS102x is big-endian. This means that the watchdog on LS1021 has been working by accident as it does not use the big-endian accessors in drivers/watchdog/imx_watchdog.c. Commit 623d96e89aca6("imx: wdog: correct wcr register settings") only revelead the endianness problem on LS102x. In order to fix the reset hang, introduce a reset_cpu() implementation that is specific for ls102x, which accesses the watchdog WCR register in big-endian format. All that is required to reset LS102x is to clear the SRS bit. This approach is a temporary workaround to avoid a regression for LS102x in the 2015.10 release. The proper fix is to make the watchdog driver endian-aware, so that it can work for i.MX, Vybrid and LS102x. Reported-by: Sinan Akman <sinan@writeme.com> Tested-by: Sinan Akman <sinan@writeme.com> Reviewed-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* | | imx_watchdog: Add a header file for watchdog registersFabio Estevam2015-10-12-13/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | Create fsl_wdog.h to store the watchdog registers and bit fields. This can be useful when accesses to the watchdog block are made from other parts, such as arch/arm/ cpu code. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* | | Prepare v2015.10-rc5Tom Rini2015-10-12-1/+1
| | | | | | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com>
* | | env_eeprom.c: Correct using saved environmentLudger Dreier2015-10-12-89/+77
| | | | | | | | | | | | | | | | | | | | | | | | | | | The changes in ed6a5d4 unintentionally broke support for reading the environment saved to eeprom back. To correct this the crc-check and decision on which environment to use is now moved to env_relocate_spec. This is done for both the "redundant env" and the "single env" case. Signed-off-by: Ludger Dreier <ludger.dreier@keymile.com>
* | | pcm052: fix MTD partitioningAlbert ARIBAUD (3ADEV)2015-10-11-35/+85
| | | | | | | | | | | | | | | | | | | | | | | | MTD partitioning in current pcm052 configuration is inconsistent. Fix it across MTDPARTS_DEFAULT, CONFIG_EXTRA_ENV_SETTINGS, and CONFIG_ENV_OFFSET[_REDUND]. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
* | | test/fs/fs-test.sh: Update expected results and TC10 logicTom Rini2015-10-11-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the changes in 7a3e70c we now get read(2) behavior so trying to read 2MB with 1MB left in the file results in 1MB read and a warning. We update the test logic here to make sure we read back 1MB as expected. This change however changes the overall summary as while EXT4 continues to not have offset support the test now fails when expected to pass rather than fails when expected to fail (and we report that as pass). Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.1 at 2024-11-04 17:22:19 +0000