summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* powerpc/mpc85xx: SECURE BOOT- NAND secure boot target for P5020 and P5040Aneesh Bansal2015-07-31-0/+12
| | | | | | | | | | | | | Secure Boot Target is added for NAND for P5020 and P5040. The Secure boot target has already been added for P3041 by enabling CONFIG_SYS_RAMBOOT and configuring CPC as SRAM. The targets for P5020 and P5040 are added in the same manner. Signed-off-by: Saksham Jain <saksham@freescale.com> Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/mpc85xx: SECURE BOOT- NAND secure boot target for P3041Aneesh Bansal2015-07-31-0/+53
| | | | | | | | | | | | | | | | | | | Secure Boot Target is added for NAND for P3041. For mpc85xx SoCs, the core begins execution from address 0xFFFFFFFC. In case of secure boot, this default address maps to Boot ROM. The Boot ROM code requires that the bootloader(U-boot) must lie in 0 to 3.5G address space i.e. 0x0 - 0xDFFFFFFF. In case of NAND Secure Boot, CONFIG_SYS_RAMBOOT is enabled and CPC is configured as SRAM. U-Boot binary will be located on SRAM configured at address 0xBFF00000. In the U-Boot code, TLB entries are created to map the virtual address 0xFFF00000 to physical address 0xBFF00000 of CPC configured as SRAM. Signed-off-by: Saksham Jain <saksham@freescale.com> Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/T102xRDB: Enable ifc nand ecc encode and decodeJaiprakash Singh2015-07-28-1/+3
| | | | | | | | | IFC nand ecc encode and decode mode are not correctly set in CSOR register during nand initialization.Enable ecc encode/decode in 4-bit mode Signed-off-by: Jaiprakash Singh <b44839@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/mpc85xx: Correct CONFIG_USB_MAX_CONTROLLER_COUNT for p1025Nikhil Badola2015-07-28-1/+1
| | | | | | | | Correct the value CONFIG_USB_MAX_CONTROLLER_COUNT macro to 1 for p1025 as it has one USB controller Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/b4860qds: Update README for DIP switch informationRaghav Dogra2015-07-28-1/+1
| | | | | | | | The board manual desribes ON as boolean 1 and OFF as boolean 0. Updating README with correct boolean values. Signed-off-by: Raghav Dogra <raghav@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/t1024: update fman liodn for mac1Shengzhou Liu2015-07-28-2/+7
| | | | | | | | | | | | MAC1 acts as 1G/10G dual-role MAC on T1024. We introduce macro SET_FMAN_RX_10G_TYPE2_LIODN for 10G MACs which have same Port ID and same offset of address with 1G MAC. Update it to match with the setting of fman in t1024 device tree, otherwise there is no 'fsl,liodn' in /proc/device-tree/soc@ffe000000/fman@400000/port@88000/ Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/t104x, t102x: Update CPC debug register value in PBI commandsPriyanka Jain2015-07-28-4/+4
| | | | | | | | | Update PBI command in pbi_cfg files to keep register bit to default reset value while configuring CPC as SRAM Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/t4rdb: fix cpld reset altbankShaohui Xie2015-07-28-7/+1
| | | | | | | | cpld reset altbank should always reset to bank4 no matter what current bank is. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/p2020rdb: fix the FDT_ERR_NOTFOUND issueYing Zhang2015-07-28-4/+11
| | | | | | | | | | | Because the function ft_board_setup() delete the USB2 device node, it leads to can't find the device node and hung up. In fact only P1020RDB needs to delete the USB2 node, this patch fixes this issue. Signed-off-by: Ying Zhang <b40530@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/T104xD4: Add Secure boot support for T104xD4RDB platformsgaurav rana2015-07-28-0/+15
| | | | | | | | defconfig files are added and SFP version for these platforms is updated. Signed-off-by: Gaurav Rana <gaurav.rana@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/T104xD4RDB: Add T104xD4RDB boards supportPriyanka Jain2015-07-28-16/+284
| | | | | | | | | | | | | | | | | | | | | | | T1040D4RDB is a Freescale reference board that hosts the T1040 SoC. T1040D4RDB is re-designed T1040RDB board with following changes : - Support of DDR4 memory - Support of 0x66 serdes protocol which can support following interfaces - 2 RGMII's on DTSEC4, DTSEC5 - 1 SGMII on DTSEC3 - Support of QE-TDM Similarily T1042D4RDB is a Freescale reference board that hosts the T1040 SoC. T1042D4RDB is re-designed T1042RDB board with following changes : - Support of DDR4 memory - Support for 0x86 serdes protocol which can support following interfaces - 2 RGMII's on DTSEC4, DTSEC5 - 3 SGMII on DTSEC1, DTSEC2 & DTSEC3 - Support of DIU Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini2015-07-25-342/+347
|\
| * sunxi: Enable both ehci and otg in host mode on various boardsHans de Goede2015-07-25-0/+6
| | | | | | | | | | | | | | | | | | | | | | Now that the device-model port of the musb mode makes it possible, enable both the ehci and otg in host mode on boards where the musb is wired up in host only mode, either via an usb-a receptacle or via an usb <-> sata converter. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi: ga10h: Enable both otg and regular usb host controllersHans de Goede2015-07-25-0/+28
| | | | | | | | | | | | | | This allows using devices plugged into both ports of the tablet. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi: musb: Stop treating not having a vbus-det gpio as an errorHans de Goede2015-07-25-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | On some boards the otg is wired up in host-only mode in this case we have no vbus-det gpio. Stop logging an error from sunxi_usb_phy_vbus_detect() in this case, and stop treating sunxi_usb_phy_vbus_detect() returning a negative errno, as if a charger is plugged into the otg port. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi: musb: Improve output during probingHans de Goede2015-07-25-5/+6
| | | | | | | | | | | | | | | | | | When we return an error the usb core will print an error-message, so in this case do not print anything. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Ian Campbell <ian.campbell@citrix.com>
| * sunxi: musb: Use device-model for musb host modeHans de Goede2015-07-25-1/+58
| | | | | | | | | | | | | | | | | | | | | | | | Modify the sunxi musb glue to use the device-model for musb host mode. This allows using musb in host mode together with other host drivers such as ehci / ohci, which is esp. useful on boards which use the musb controller in host-only mode, these boards have e.g. an usb-a receptacle or an usb to sata converter attached to the musb controller. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi: musb: Move musb config and platdata to the sunxi-musb glueHans de Goede2015-07-25-36/+34
| | | | | | | | | | | | | | | | | | Move the musb config and platdata to the sunxi-musb glue, which is where it really belongs. This is preparation patch for adding device-model support for the sunxi-musb-host code. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi: musb: Add id pin supportHans de Goede2015-07-25-0/+8
| | | | | | | | | | | | | | | | | | | | When in host mode check if there is a host cable inserted into the otg port by checking the id pin. If there is no host cable return an error to make usb_lowlevel_init() exit early, rather then waiting for 1 second for a device which will never show up. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi: musb: Move vbus check to sunxi_musb_enableHans de Goede2015-07-25-10/+9
| | | | | | | | | | | | | | This way it can be re-checked on "usb reset". Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi: usb-phy: Add support for reading otg id pin valueHans de Goede2015-07-25-0/+42
| | | | | | | | | | | | | | | | Add support for reading the id pin value of the otg connector to the usb phy code. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi: Enable CMD_USB and USB_STORAGE by default on sunxiHans de Goede2015-07-25-5/+2
| | | | | | | | | | | | | | | | | | | | Start using the new Kconfig options which are available for these now, and simply always enable them by selecting them as sunxi builds always include USB support. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> Reviewed-by: Simon Glass <sjg@chromium.org>
| * sunxi: Update selects in arch/arm/Kconfig for DM conversionsTom Rini2015-07-25-250/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | With certain features being convert to DM now we want sunxi to default to having DM enabled for ETH/SERIAL and USB in some cases. Cc: Hans de Goede <hdegoede@redhat.com> Cc: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Tom Rini <trini@konsulko.com> [hdegoede@redhat.com: Also select CONFIG_USB for all sunxi builds] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> Reviewed-by: Simon Glass <sjg@chromium.org>
| * sunxi: Remove bogus uart entry from utoo-p66 dts fileHans de Goede2015-07-25-14/+0
| | | | | | | | | | | | | | | | | | | | | | At one point in time the utoo-p66 dts file in the kernel had a bogus uart entry, and it seems like we synced with the kernel at just the wrong moment. This commit removes the bogus uart entry, which breaks booting the utoo-p66 when DM_SERIAL=y. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * sunxi: spl: Remove redundant check from `board_mmc_init` for signatureDaniel Kochmański2015-07-24-9/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | Remove the boot signature check from board_mmc_init() in spl mode, as it is already done in spl_boot_device() in this case, and update the comments to reflect this. Signed-off-by: Daniel Kochmański <dkochmanski@turtle-solutions.eu> CC: Roy Spliet <r.spliet@ultimaker.com> Cc: Ian Campbell <ijc@hellion.org.uk> [hdegoede@redhat.com: Disable the check only for SPL instead of always] Acked-by: Hans De Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * sunxi: spl: Detect at runtime where SPL was read fromDaniel Kochmański2015-07-24-12/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | Make possible using a single `u-boot-sunxi-with-spl.bin` binary for both NAND memory and SD card. Detection where SPL was read from is implemented in `spl_boot_device`. Signed-off-by: Daniel Kochmański <dkochmanski@turtle-solutions.eu> CC: Roy Spliet <r.spliet@ultimaker.com> Cc: Ian Campbell <ijc@hellion.org.uk> [hdegoede@redhat.com: Some small coding style fixes] Acked-by: Hans De Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * sunxi: Create helper function veryfing valid boot signature on MMCDaniel Kochmański2015-07-24-6/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch extracts checking for valid SD card "eGON.BT0" signature from `board_mmc_init` into function `sunxi_mmc_has_egon_boot_signature`. Buffer for mmc sector is allocated and freed at runtime. `panic` is triggered on malloc failure. Signed-off-by: Daniel Kochmański <dkochmanski@turtle-solutions.eu> CC: Roy Spliet <r.spliet@ultimaker.com> Cc: Ian Campbell <ijc@hellion.org.uk> [hdegoede@redhat.com: Small bugfix to make it work for devs other then mmc0] Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * mmc: Protect `mmc_initialize` from initialising mmc multiple timesDaniel Kochmański2015-07-24-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | `mmc_initialize` might be called multiple times leading to the mmc-controllers being initialised twice, and initialising the `mmc_devices` list head twice which may lead to memory leaks. Signed-off-by: Daniel Kochmański <dkochmanski@turtle-solutions.eu> CC: Roy Spliet <r.spliet@ultimaker.com> Cc: Ian Campbell <ijc@hellion.org.uk> CC: Pantelis Antoniou <panto@antoniou-consulting.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | Merge git://git.denx.de/u-boot-usbTom Rini2015-07-24-374/+666
|\ \
| * | usb: ci_udc: fix request allocation when endpoints are disabledRob Herring2015-07-24-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ci_udc driver request allocation assumes that the endpoint descriptor pointer is set to retrieve the endpoint number, but that is only true when the endpoint is enabled. This results in a NULL ptr dereference which for me happens to return 0 value. This causes the EP0 request struct to be returned for other endpoints. Some gadget drivers like fastboot and USB MS work fine, but ethernet does not. Really, the ci_udc driver is the oddball here doing this EP0 special case handling Stephen added. All the other drivers alloc/free functions are pretty much the same with the only variation being the size of the private struct. This could all be consolidated to a common function. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Marek Vasut <marex@denx.de> Acked-by: Stephen Warren <swarren@nvidia.com>
| * | ci_udc: fix 64-bit compile warningsStephen Warren2015-07-23-9/+10
| | | | | | | | | | | | | | | | | | | | | This is the same as f72d8320b605 "usb: ci_udc: fix warnings on 64-bit builds", but more. Signed-off-by: Stephen Warren <swarren@nvidia.com>
| * | usb: ehci-marvell: Drop wrl accessor functionStefan Roese2015-07-22-14/+12
| | | | | | | | | | | | | | | | | | | | | | | | This patch removes the wrl accessor function from the Marvell EHCI driver by replacing it with the writel function. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Marek Vasut <marex@denx.de>
| * | usb: CONFIG_USB_FASTBOOT prefix replacement for consistencyPaul Kocialkowski2015-07-22-20/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | FASTBOOT is defined both by CONFIG_USB_FUNCTION_FASTBOOT AND CONFIG_CMD_FASTBOOT, so it doesn't make much sense to have a CONFIG_USB_FASTBOOT prefix for fastboot-specific options, especially given that other config options for fastboot use the CONFIG_FASTBOOT prefix. This replaces the CONFIG_USB_FASTBOOT prefix with CONFIG_FASTBOOT, for consistency. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
| * | implement Fastboot via USB OTG on bcm28155_ap boardsJiandong Zheng2015-07-22-0/+61
| | | | | | | | | | | | | | | Signed-off-by: Jiandong Zheng <jdzheng@broadcom.com> Signed-off-by: Steve Rae <srae@broadcom.com>
| * | usb: gadget: bcm_udc_otg filesJiandong Zheng2015-07-22-0/+80
| | | | | | | | | | | | | | | | | | | | | Add the required files for the Broadcom UDC OTG interface. Signed-off-by: Jiandong Zheng <jdzheng@broadcom.com> Signed-off-by: Steve Rae <srae@broadcom.com>
| * | g_dnl: add missing declarationSteve Rae2015-07-22-0/+1
| | | | | | | | | | | | | | | | | | Signed-off-by: Steve Rae <srae@broadcom.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Test HW: Exynos 4210 (trats), Exynos 5422 (Odroid XU3)
| * | usb: gadget: fastboot: Dequeue the previous IN request for the current requestPaul Kocialkowski2015-07-22-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recent versions of the fastboot tool will query the partition type before doing an operation on a partition (such as erase, flash, etc). It will then submit the operation as soon as the response for the partition type is received. Usually, the MUSB controller will see that the partition type request return status was read by the host at the very same time as the actual operation request is submitted by the host. However, the operation will be read first (int_rx is handled first in musb_interrupt) and after it is completed, the fastboot USB gadget driver will send another return status. Hence, this happens before the musb gadget framework has had a chance to handle the previous acknowledgement that the host read the return status and dequeue the request. The host will then usually empty the FIFO by the time musb_interrupt gets around handling the return status acknowledgement (for the previous request, this is still on the same musb_interrupt call), so no other interrupt is generated and the most recent return status acknowledgement remains unaccounted for. It will then be used as a response for the next command, and the proper response for it will be delayed to the next command, and so on. Dequeuing the previous IN request in the fastboot code ensures that no previous return status remains. It is acceptable to do it since there is no callback to it anyways. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
| * | usb: gadget: fastboot: Request status and length check in rx handlerPaul Kocialkowski2015-07-22-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | This avoids handling requests that have an error status or no data. In particular, this avoids showing unnecessary error messages when the USB gadget gets disconnected (e.g. with fastboot continue) and the fastboot USB gadget driver sends an error back to the host (that has disconnected already). Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
| * | fastboot: Dynamic controller index for usb_gadget_handle_interruptsPaul Kocialkowski2015-07-22-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Since we're now using a dynamic controller index for fastboot too, usb_gadget_handle_interrupts should be using it instead of 0 (despite the fact that it's currently not being used at all in the musb-new implementation). Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
| * | usb: gadget: Weak board_usb_init/cleanup definitions in USB download gadget codePaul Kocialkowski2015-07-22-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Weak versions of board_usb_init and board_usb_cleanup are defined in common USB host code, but it is also used for USB device gadgets, so we also need a weak definition of it when there is no USB host enabled. Both weak definitions do not conflict. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Test HW: Odroid_XU3 (Exynos5422), trats (Exynos4210)
| * | usb: board_usb_init and board_usb_cleanup calls in the fastboot commandPaul Kocialkowski2015-07-22-7/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Each USB download function command calls board_usb_init before registering the USB gadget and board_usb_cleanup after de-registering it. On devices currently using fasboot, musb-new is usually initialized earlier, but some other boards might need the board_usb_init call to properly initialize musb-new. This requires adding an argument (the USB controller index) to the fastboot command, as it is currently done with other USB download gadget functions. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Test HW: Odroid_XU3 (Exynos5422), trats (Exynos4210)
| * | usb: Fastboot function config for better consistency with other functionsPaul Kocialkowski2015-07-22-4/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | USB download gadget functions such as thor and dfu have a separate config option for the USB gadget part of the code, independent from the command part. This switches the fastboot USB gadget to the same scheme, for better consistency. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Test HW: Odroid_XU3 (Exynos5422), trats (Exynos4210)
| * | usb: USB download gadget and functions config options coherent namingPaul Kocialkowski2015-07-22-57/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This introduces a coherent scheme for naming USB download gadget and functions config options. The download USB gadget config option is moved to CONFIG_USB_GADGET_DOWNLOAD for better consistency with other gadgets and each function's config option is moved to a CONFIG_USB_FUNCTION_ prefix. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Test HW: Odroid_XU3 (Exynos5422), trats (Exynos4210)
| * | drivers: usb: fsl: Remove LS102XA immap inclusionNikhil Badola2015-07-22-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | Remove LS102XA immap header inclusion from xhci fsl driver. It removes redefinition warnings when built for platforms other than LS102XA Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
| * | include: usb: Map USB controller base addresses for LS2085ANikhil Badola2015-07-22-0/+3
| | | | | | | | | | | | | | | | | | Map USB XHCI controller base addresses for LS2085A SOC Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
| * | include: usb: Move USB controller base address mappingNikhil Badola2015-07-22-9/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | Move USB controller Base address mapping from ls102xa immap to fsl xhci header. This is required to remove any warnings when controller base addresses are mapped for multiple platforms in their respective files. Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
| * | drivers: usb: fsl: Implement Erratum A-009116 for XHCI controllerNikhil Badola2015-07-22-6/+25
| | | | | | | | | | | | | | | | | | | | | This adjusts (micro)frame length to appropriate value thus avoiding USB devices to time out over a longer run Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
| * | drivers: usb: fsl: Remove warnings for 64-bit architecturesNikhil Badola2015-07-22-4/+4
| | | | | | | | | | | | | | | | | | | | | Replace uint32_t with uintptr_t to remove compilation warnings for 64-bit architectures. Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
| * | ls1021aqds: Enable USB IP supportRamneek Mehresh2015-07-22-5/+17
| | | | | | | | | | | | | | | | | | | | | Enable USB IP support for both EHCI and XHCI for ls1021aqds platform Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
| * | ls1021atwr: Enable USB IP supportRamneek Mehresh2015-07-22-0/+38
| | | | | | | | | | | | | | | | | | | | | Enable USB IP support for both EHCI and XHCI for ls1021atwr platform Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
generated by cgit v1.1 at 2024-11-08 09:33:51 +0000