summaryrefslogtreecommitdiff
Commit message (Expand)AuthorAgeLines
...
* MLK-11718-2: mtd: nand: change the BCH layout setting for large oob NANDHan Xu2015-10-15-23/+113
* MLK-11718-1: mtd: nand: change the maximum nange page size and oob sizeHan Xu2015-10-15-2/+2
* MLK-11675 ARM: imx: change the VDD_SOC normal voltage to 0.975VBai Ping2015-10-13-0/+37
* MLK-11682 imx: mx6ul: Update DDR script of 14x14 EVK board to 1.2 revYe.Li2015-10-10-21/+16
* MLK-11662-2 imx: mx6ul: Modify the MMDC automatic Power saving timerYe.Li2015-09-30-1/+1
* MLK-11662-1 imx: mx6ul: Change 14x14 LPDDR2 ARM2 memory size to 256MBYe.Li2015-09-30-2/+10
* MLK-11622 imx6dqp-sabresd: update ddr script to v1.08Robby Cai2015-09-24-2/+2
* MLK-11616 imx: mx6qpsabresd: Add defconfig filesPeng Fan2015-09-24-0/+14
* MLK-11554 imx: mx6ulevk: Modify the mtest memory end to half of PHYS_SDRAM_SIZEYe.Li2015-09-16-1/+1
* MLK-11551 imx: mx6qpsabresd: Update DDR initialization in pluginYe.Li2015-09-16-0/+180
* MLK-11553 imx: mx7 fix typo for showclocksPeng Fan2015-09-15-2/+2
* MLK-11549 imx: imx6ul: enlarge MMDC_MAPSR.PST to 16Anson Huang2015-09-15-1/+1
* MLK-11548 imx: imx6qp: add SabreSD board supportAnson Huang2015-09-15-1/+174
* MLK-11528 imx: mx6ul check fuse before init beePeng Fan2015-09-10-1/+14
* MLK-11505 imx: mx6ul: Disable the LCDIF before system resetYe.Li2015-09-08-0/+9
* MLK-11486 imx: mx6ul 9x9 evk correct CS0_ENDPeng Fan2015-09-04-2/+2
* MLK-11490 ARM: imx: imx6ul: disable pfuze3000 low power modeAnson Huang2015-09-02-0/+5
* MLK-11478 imx: mx6ul: Add QSPINOR boot support on mx6ul 9x9 evk boardYe.Li2015-09-01-0/+5
* MLK-11427 imx: mx7d: Update DDR script for mx7d sabresd boardYe.Li2015-09-01-23/+29
* MLK-11461 imx: imx6ul: enable LDO bypass for 9x9 EVK boardAnson Huang2015-09-01-12/+55
* MLK-11433 driver: fastboot: Discard unused directoryPeng Fan2015-08-28-9/+0
* MLK-11408-2 imx: mx7d: Isolate 26 IP resources to domain 0 for A coreYe.Li2015-08-25-0/+55
* MLK-11408-1 imx: mx7d: Add mx7d RDC driver supportYe.Li2015-08-25-0/+190
* tools/imximage: set DCD pointer to NULL when its length is 0Baruch Siach2015-08-20-1/+5
* MLK-11388 imx: mx7d: add support for mx7d 19x19 lpddr2 arm2 boardYe.Li2015-08-20-1/+285
* MLK-11367 imx: mx6ul: Add cma bootargs for 6ul 9x9 boardYe.Li2015-08-17-0/+6
* MLK-11364 imx: mx6ul : Add support for i.MX6UL 9x9 EVK boardYe.Li2015-08-17-4/+306
* MA-6987 the value of vmalloc on Kernel command line still display 400M after ...zhang sanshan2015-08-13-1/+2
* MLK-11320 ARM: imx7d: disable wdog powerdown timer for LPSRAnson Huang2015-08-05-0/+5
* MLK-11281-2 ARM: imx7d: enable plug in mode by default for lpsr modeAnson Huang2015-08-05-0/+1
* MLK-11281-1 ARM: imx7d: add lpsr resume support for imx7dAnson Huang2015-08-05-0/+343
* MLK-11263-2 video: epdc: move setup_waveform_file to board commonPeng Fan2015-08-03-146/+38
* MLK-11263-1 video: epdc: support display logo on E-Ink screenPeng Fan2015-08-03-12/+194
* MLK-11299 ARM: imx7d: initialize PMIC standby mode and voltageAnson Huang2015-08-03-0/+67
* MLK-10957: ARM: mx6qp: do not turn off PURobin Gong2015-07-31-1/+2
* MLK-11304 MX6 SabreSD: Disable HDMI detectPeng Fan2015-07-31-1/+1
* MA-6928 Bootargs cannot be setzhang sanshan2015-07-28-25/+16
* MA-6924 [Android_MX6_MX7] fastboot: 'fastboot reboot-bootloader' do not workzhang sanshan2015-07-27-6/+6
* MLK-11275 imx: mx6ul: Fix otg1 id pin pad setting on 6ul DDR3 ARM2Ye.Li2015-07-22-1/+1
* MLK-11270 ARM: imx: correct the pmic standby voltage of sw1ab on i.mx6ulBai Ping2015-07-22-2/+2
* MLK-10932-3 common: autoboot: need to disconnect with pc for usb bootPeter Chen2015-07-14-0/+1
* MLK-10932-2 ARM: imx7: imx-regs: add disconnect_from_pc APIPeter Chen2015-07-14-1/+2
* MLK-10932-1 ARM: imx6: imx-regs: add disconnect_from_pc APIPeter Chen2015-07-14-1/+2
* MLK-11238 imx: mx7d fix usdhc pad settingsPeng Fan2015-07-13-35/+24
* MLK-11228-3 android: Add "data" partition in fastbootYe.Li2015-07-13-6/+19
* MLK-11228-2 android: Add fastboot command "reboot-bootloader" supportYe.Li2015-07-13-3/+29
* MLK-11228-1 android: Integrate community fastboot with FSL i.MX fastbootYe.Li2015-07-13-3793/+2267
* MLK-11237 imx: mx6qpsabreauto update ddr script to 1.07Peng Fan2015-07-13-2/+8
* MLK-11230 imx6: USB: Modify OTG ID pin pad setting to pull upYe.Li2015-07-09-14/+54
* MLK-11227 imx: mx6ul_14x14_lpddr2_arm2 add weimnor defconfigPeng Fan2015-07-09-5/+31
generated by cgit v1.1 at 2024-11-19 22:34:40 +0000