summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorYe.Li <B37916@freescale.com>2015-08-25 15:07:15 +0800
committerYe.Li <B37916@freescale.com>2015-08-25 15:56:16 +0800
commite7d4767331f1a2cbef61b4e89beb73731f267499 (patch)
tree68426b4587a6697a25bab2568757196516d1417c
parent3b548a3ddf03dcbb646912ef7bbdd3cdb2daf81a (diff)
downloadu-boot-imx-e7d4767331f1a2cbef61b4e89beb73731f267499.zip
u-boot-imx-e7d4767331f1a2cbef61b4e89beb73731f267499.tar.gz
u-boot-imx-e7d4767331f1a2cbef61b4e89beb73731f267499.tar.bz2
MLK-11408-2 imx: mx7d: Isolate 26 IP resources to domain 0 for A core
In current design, if any peripheral was assigned to both A7 and M4, it will receive ipg_stop or ipg_wait when any of the 2 platforms enter low power mode. We will have a risk that, if A7 enter wait, M4 enter stop, peripheral will have chance to get ipg_stop and ipg_wait asserted same time. There are 26 peripherals impacted by this IC issue: SIM2(sim2/emvsim2) SIM1(sim1/emvsim1) UART1/UART2/UART3/UART4/UART5/UART6/UART7 SAI1/SAI2/SAI3 WDOG1/WDOG2/WDOG3/WDOG4 GPT1/GPT2/GPT3/GPT4 PWM1/PWM2/PWM3/PWM4 ENET1/ENET2 Software Workaround: The solution is set M4 to a different domain with A core. So the peripherals are not shared by them. This way requires the uboot implemented the RDC driver and set the 26 IPs above to domain 0 only. CM4 image will set the M4 to domain 1 only. This patch enables the CONFIG_MXC_RDC for mx7d SABRESD board and ARM2 boards, and setup the 26 IP resources to domain 0. Signed-off-by: Ye.Li <B37916@freescale.com>
-rw-r--r--arch/arm/cpu/armv7/mx7/soc.c51
-rw-r--r--include/configs/mx7d_arm2.h2
-rw-r--r--include/configs/mx7dsabresd.h2
3 files changed, 55 insertions, 0 deletions
diff --git a/arch/arm/cpu/armv7/mx7/soc.c b/arch/arm/cpu/armv7/mx7/soc.c
index e30493e..58621ce 100644
--- a/arch/arm/cpu/armv7/mx7/soc.c
+++ b/arch/arm/cpu/armv7/mx7/soc.c
@@ -18,6 +18,10 @@
#include <dm.h>
#include <imx_thermal.h>
#include <mxsfb.h>
+#ifdef CONFIG_MXC_RDC
+#include <asm/imx-common/rdc-sema.h>
+#include <asm/arch/imx-rdc.h>
+#endif
#ifdef CONFIG_FSL_FASTBOOT
#ifdef CONFIG_ANDROID_RECOVERY
#include <recovery.h>
@@ -39,6 +43,50 @@ U_BOOT_DEVICE(imx7_thermal) = {
};
#endif
+#ifdef CONFIG_MXC_RDC
+static rdc_peri_cfg_t const resources[] = {
+ (RDC_PER_SIM1 | RDC_DOMAIN(0)),
+ (RDC_PER_SIM2 | RDC_DOMAIN(0)),
+ (RDC_PER_UART1 | RDC_DOMAIN(0)),
+ (RDC_PER_UART2 | RDC_DOMAIN(0)),
+ (RDC_PER_UART3 | RDC_DOMAIN(0)),
+ (RDC_PER_UART4 | RDC_DOMAIN(0)),
+ (RDC_PER_UART5 | RDC_DOMAIN(0)),
+ (RDC_PER_UART6 | RDC_DOMAIN(0)),
+ (RDC_PER_UART7 | RDC_DOMAIN(0)),
+ (RDC_PER_SAI1 | RDC_DOMAIN(0)),
+ (RDC_PER_SAI2 | RDC_DOMAIN(0)),
+ (RDC_PER_SAI3 | RDC_DOMAIN(0)),
+ (RDC_PER_WDOG1 | RDC_DOMAIN(0)),
+ (RDC_PER_WDOG2 | RDC_DOMAIN(0)),
+ (RDC_PER_WDOG3 | RDC_DOMAIN(0)),
+ (RDC_PER_WDOG4 | RDC_DOMAIN(0)),
+ (RDC_PER_GPT1 | RDC_DOMAIN(0)),
+ (RDC_PER_GPT2 | RDC_DOMAIN(0)),
+ (RDC_PER_GPT3 | RDC_DOMAIN(0)),
+ (RDC_PER_GPT4 | RDC_DOMAIN(0)),
+ (RDC_PER_PWM1 | RDC_DOMAIN(0)),
+ (RDC_PER_PWM2 | RDC_DOMAIN(0)),
+ (RDC_PER_PWM3 | RDC_DOMAIN(0)),
+ (RDC_PER_PWM4 | RDC_DOMAIN(0)),
+ (RDC_PER_ENET1 | RDC_DOMAIN(0)),
+ (RDC_PER_ENET2 | RDC_DOMAIN(0)),
+};
+
+static void isolate_resource(void)
+{
+ /* At default, all resources are in domain 0 - 3. Here we setup
+ * some resources to domain 0 where M4 codes will move the M4
+ * out of this domain. Then M4 is not able to access them any longer.
+ * This is a workaround for ic issue. In current design, if any peripheral
+ * was assigned to both A7 and M4, it will receive ipg_stop or ipg_wait
+ * when any of the 2 platforms enter low power mode. So M4 sleep will cause
+ * some peripherals fail to work at A core side.
+ */
+ imx_rdc_setup_peripherals(resources, ARRAY_SIZE(resources));
+}
+#endif
+
u32 get_cpu_rev(void)
{
struct mxc_ccm_anatop_reg *ccm_anatop = (struct mxc_ccm_anatop_reg *)
@@ -167,6 +215,9 @@ int arch_cpu_init(void)
set_epdc_qos();
+#ifdef CONFIG_MXC_RDC
+ isolate_resource();
+#endif
return 0;
}
diff --git a/include/configs/mx7d_arm2.h b/include/configs/mx7d_arm2.h
index ecc3d22..3e94672 100644
--- a/include/configs/mx7d_arm2.h
+++ b/include/configs/mx7d_arm2.h
@@ -100,6 +100,8 @@
#define CONFIG_CMD_SETEXPR
#ifdef CONFIG_CMD_BOOTAUX
+#define CONFIG_MXC_RDC /* Enable RDC to isolate the peripherals for A7 and M4 */
+
#define UPDATE_M4_ENV \
"m4image=m4_qspi.bin\0" \
"loadm4image=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4image}\0" \
diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h
index 9c38a7e..2d4bfae 100644
--- a/include/configs/mx7dsabresd.h
+++ b/include/configs/mx7dsabresd.h
@@ -123,6 +123,8 @@
#define CONFIG_CMD_SETEXPR
#ifdef CONFIG_CMD_BOOTAUX
+#define CONFIG_MXC_RDC /* Enable RDC to isolate the peripherals for A7 and M4 */
+
#define UPDATE_M4_ENV \
"m4image=m4_qspi.bin\0" \
"loadm4image=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4image}\0" \