summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* smdk6400: add gitignoreJean-Christophe PLAGNIOL-VILLARD2008-08-31-0/+5
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* smdk6400: Use CONFIG_FLASH_CFI_DRIVERJean-Christophe PLAGNIOL-VILLARD2008-08-31-1/+1
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* smdk6400: remove redundant bootargs definitionGuennadi Liakhovetski2008-08-31-1/+0
| | | | | | Double bootargs setting leads to a duplicated environmant entry. Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
* ARM: Add support for S3C6400 based SMDK6400 boardGuennadi Liakhovetski2008-08-31-0/+1126
| | | | | | | | | SMDK6400 can only boot U-Boot from NAND-flash. This patch adds a nand_spl driver for it too. The board can also boot from the NOR flash, but due to hardware limitations it can only address 64KiB on it, which is not enough for U-Boot. Based on the original sources by Samsung for U-Boot 1.1.6. Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
* NAND: add NAND driver for S3C64XXGuennadi Liakhovetski2008-08-31-0/+320
| | | | | | Based on the original S3C64XX NAND driver by Samsung for U-Boot 1.1.6. Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
* S3C64XX: remove broken HWFLOW support from the serial driverGuennadi Liakhovetski2008-08-31-21/+0
| | | | | | | As noted by Harald Welte, HWFLOW support in the S3C64XX serial driver is broken and currently unused. Remove it. Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
* serial: add S3C64XX serial driverGuennadi Liakhovetski2008-08-31-0/+194
| | | | | | Based on the original S3C64XX UART driver by Samsung for U-Boot 1.1.6. Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
* USB: Add support for OHCI controller on S3C6400Guennadi Liakhovetski2008-08-31-0/+47
| | | | | | | | Notice: USB on S3C6400 currently works _only_ with switched off MMU. One could try to enable the MMU, but map addresses 1-to-1, and disable data cache, then it should work too and we could still profit from instruction cache. Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
* ARM: Add arm1176 core with S3C6400 SoCGuennadi Liakhovetski2008-08-31-1/+2334
| | | | | | Based on the original S3C64XX port by Samsung for U-Boot 1.1.6. Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
* ARM DaVinci: Changing function names for EMAC driverSandeep Paulraj2008-08-31-82/+82
| | | | | | | | | | DM644x is just one of a series of DaVinci chips that use the EMAC driver. By replacing all the function names that start with dm644x_* to davinci_* we make these function more portable. I have tested this change on my EVM. DM6467 is another DaVinci SOC which uses the EMAC driver and i will be sending patches that add DaVinci DM6467 support to the list soon. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* Integrator[AP/CP] - Remove unused file memsetup.SGururaja Hebbar K R2008-08-30-60/+2
| | | | | | | | | - memsetup.s is changed/merged to lowlevel_init.S memsetup.S has a global label memsetup that just returns back to caller - memsetup global label is changed/merged to lowlevel_init This label is not called from anywhere. Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
* ARM DaVinci: Standardize names of directories/filesHugo Villeneuve2008-08-30-4/+4
| | | | | | | ARM DaVinci: Standardize names of directories/files. Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* ARM DaVinci: Move common functions to board/davinci/commonHugo Villeneuve2008-08-30-464/+404
| | | | | | ARM DaVinci: Move common functions to board/davinci/common. Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
* Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk2008-08-28-2/+882
|\
| * Merge branch 'master' of git://git.denx.de/u-boot-mpc5xxxWolfgang Denk2008-08-28-2/+882
| |\
| | * mpc52xx: added support for the MPC5200 based MUC.MC52 board from MAN.Heiko Schocher2008-08-27-2/+882
| | | | | | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de>
* | | FSL DDR: Remove duplicate setting of cs0_bnds register on 86xx.Kumar Gala2008-08-28-1/+0
|/ / | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk2008-08-28-1640/+5625
|\ \
| * | mpc85xx: remove redudant code with lib_ppc/interrupts.cKumar Gala2008-08-27-97/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For some reason we duplicated the majority of code in lib_ppc/interrupts.c not show how that happened, but there is no good reason for it. Use the interrupt_init_cpu() and timer_interrupt_cpu() since its why they exist. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | mpc85xx: Add support for the MPC8536DS reference boardKumar Gala2008-08-27-0/+1675
| | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> Signed-off-by: Dejan Minic <minic@freescale.com> Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | mpc85xx: Add support for the MPC8536Kumar Gala2008-08-27-5/+218
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MPC8536 Adds SDHC and SATA controllers to the PQ3 family. We also have SERDES init code for the 8536. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> Signed-off-by: Dejan Minic <minic@freescale.com> Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Dave Liu <daveliu@freescale.com>
| * | mpc85xx: Add support for the MPC8572DS reference boardKumar Gala2008-08-27-2/+1593
| | | | | | | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | FSL DDR: Remove old SPD support from cpu/mpc85xxKumar Gala2008-08-27-1166/+4
| | | | | | | | | | | | | | | | | | | | | All 85xx boards have been converted to the new code so we can remove the old SPD DDR setup code. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | FSL DDR: Convert STXSSA to new DDR code.Kumar Gala2008-08-27-18/+98
| | | | | | | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | FSL DDR: Convert STXGP3 to new DDR code.Kumar Gala2008-08-27-19/+100
| | | | | | | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | FSL DDR: Convert SBC8560 to new DDR code.Kumar Gala2008-08-27-14/+122
| | | | | | | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | FSL DDR: Convert MPC8540EVAL to new DDR code.Kumar Gala2008-08-27-12/+102
| | | | | | | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | FSL DDR: Convert PM856 to new DDR code.Kumar Gala2008-08-27-34/+109
| | | | | | | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | FSL DDR: Convert PM854 to new DDR code.Kumar Gala2008-08-27-34/+109
| | | | | | | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | FSL DDR: Convert sbc8548 to new DDR code.Kumar Gala2008-08-27-17/+108
| | | | | | | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | FSL DDR: Convert atum8548 to new DDR code.Kumar Gala2008-08-27-37/+122
| | | | | | | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | FSL DDR: Convert socrates to new DDR code.Kumar Gala2008-08-27-16/+111
| | | | | | | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | FSL DDR: Convert MPC8544DS to new DDR code.Kumar Gala2008-08-27-25/+113
| | | | | | | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | FSL DDR: Convert MPC8568MDS to new DDR code.Jon Loeliger2008-08-27-24/+117
| | | | | | | | | | | | | | | Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | FSL DDR: Convert MPC8548CDS to new DDR code.Jon Loeliger2008-08-27-18/+108
| | | | | | | | | | | | | | | Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | FSL DDR: Convert MPC8541CDS to new DDR code.Jon Loeliger2008-08-27-14/+102
| | | | | | | | | | | | | | | Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | FSL DDR: Convert MPC8555ADS to new DDR code.Jon Loeliger2008-08-27-18/+105
| | | | | | | | | | | | | | | Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | FSL DDR: Convert MPC8560ADS to new DDR code.Jon Loeliger2008-08-27-36/+110
| | | | | | | | | | | | | | | Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | FSL DDR: Convert MPC8540ADS to new DDR code.Kumar Gala2008-08-27-40/+110
| | | | | | | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | FSL DDR: Add 85xx specific register settingKumar Gala2008-08-27-0/+318
| | | | | | | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | FSL DDR: Add e500 TLB helper for DDR codeKumar Gala2008-08-27-0/+65
| |/ | | | | | | | | | | | | Provide a helper function that board code can call to map TLBs when setting up DDR. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | dm9000 remove dead external phy support, gpio fixAndrew Dyer2008-08-26-144/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | dm9000 has code to detect and initialize external phy parts, but later on in the code the part is forced to use the internal phy unconditionally. Remove the unused/untested code. change the GPIO initialization so that only the GPIO used as an internal phy reset (hardwired in the chip) is set as an output. The remaining GPIO need to be handled by board specific code to prevent possible drive conflicts. Set as inputs for safety. replace a few magic numbers with defines Signed-off-by: Andrew Dyer <adyer@righthandtech.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* | Standardize bootp, tftpboot, rarpboot, dhcp, and nfs command descriptionsPeter Tyser2008-08-26-5/+5
| | | | | | | | | | | | | | | | | | cmd_net.c command descriptions were updated to describe the optional hostIPaddr argument. The dhcp command help message was also updated to more closely reflect the other commands in cmd_net.c Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* | Fix bogus error message in the DHCP handlerRemy Bohmer2008-08-26-0/+3
| | | | | | | | | | | | | | | | The DHCP handler has 1 state that is not listed in this case, causing a failure message when there is actually no failure. Signed-off-by: Remy Bohmer <linux@bohmer.net> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* | Fix compile error when CONFIG_BOOTP_RANDOM_DELAY is set.Remy Bohmer2008-08-26-1/+1
| | | | | | | | | | | | | | | | The option CONFIG_BOOTP_RANDOM_DELAY does not compile, because of a missing extern inside the net/bootp.h header Signed-off-by: Remy Bohmer <linux@bohmer.net> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* | ColdFire: Add FEC Buffer descriptors in SRAMTsiChung Liew2008-08-26-6/+36
| | | | | | | | | | | | | | | | Add FEC Buffer descriptors and data buffer in SRAM for faster execution and access. Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* | Fix ColdFire FEC warning messagesTsiChung Liew2008-08-26-8/+13
| | | | | | | | | | | | | | | | Types mismatch and implicit declaration of icache_invalid() warning messages Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* | Moved initialization of SKGE Ethernet driver to board code.Ben Warren2008-08-26-5/+14
| | | | | | | | | | | | | | The only board using this driver is the SL8245 board. Removed initialization for the driver from net/eth.c Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* | Moved conditional compilation to Makefile for SK98 Ethernet driverBen Warren2008-08-26-92/+4
| | | | | | | | | | Brute-force removal of #ifdefs. Didn't touch the code. Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* | Moved initialization of ULI526X Ethernet driver to board code.Ben Warren2008-08-26-4/+10
| | | | | | | | | | | | | | The only board using this driver is the Freescale MPC8610HPCD board. Removed initialization for the driver from net/eth.c Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
generated by cgit v1.1 at 2024-11-14 21:58:00 +0000