summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driverMarkus Klotzbuecher2006-11-27-6/+41
| | | | | | and adapted board configs TQM5200 and yosemite accordingly. This commit also makes the maximum number of root hub ports configurable (CFG_USB_OHCI_MAX_ROOT_PORTS).
* Merge with /home/wd/git/u-boot/masterWolfgang Denk2006-08-07-5971/+16229
|\
| * Merge with /home/tur/proj/usb_sticks/u-bootWolfgang Denk2006-08-07-34/+71
| |\
| | * Prevent USB commands from working when USB is stopped.Bartlomiej Sieka2006-08-03-0/+12
| | |
| | * Add rudimentary handling of alternate settings of USB interfaces - to fixBartlomiej Sieka2006-08-02-34/+59
| | | | | | | | | | | | problems with some USB storage devices. Some code readability improvements.
| * | PPC440 DDR setup: Set SDRAM0_CFG0[PMU]=0 for best performanceStefan Roese2006-07-28-7/+103
| | | | | | | | | | | | | | | | | | | | | AMCC suggested to set the PMU bit to 0 for best performace on the PPC440 DDR controller. Please see doc/README.440-DDR-performance for details. Patch by Stefan Roese, 28 Jul 2006
| * | Merge with /home/sr/git/u-boot/denxWolfgang Denk2006-07-27-9/+46
| |\ \
| | * | AMCC bamboo (440EP) U-Boot image reduced to 384kbyteStefan Roese2006-07-27-6/+33
| | | | | | | | | | | | | | | | | | | | Please see doc/README.bamboo for details. Patch by Stefan Roese, 27 Jul 2006
| | * | Fix CONFIG_CMDLINE_EDITING implementationStefan Roese2006-07-27-3/+13
| | | | | | | | | | | | | | | | Patch by Stefan Roese, 27 Jul 2006
| * | | Fix preboot message on TQM5200 after switching to hush parser.Wolfgang Denk2006-07-26-1/+3
| |/ /
| * | MCC200: set default configuration to low_boot DDR,Wolfgang Denk2006-07-23-10/+32
| | | | | | | | | | | | and support for configurable options high_boot and/or SDRAM.
| * | Add support for 256 MB SDRAM on CPU87Wolfgang Denk2006-07-22-11/+40
| | | | | | | | | | | | Patch by Josef Wagner, 25 Nov 2005
| * | Add configuration for cam5200 board (based on TQM5200S).Wolfgang Denk2006-07-22-12/+14
| | |
| * | Code cleanupWolfgang Denk2006-07-21-1/+1
| | |
| * | Code cleanup.Wolfgang Denk2006-07-21-8/+4
| | |
| * | More code cleanupWolfgang Denk2006-07-21-15/+37
| | |
| * | Disabled kvme080 board in MAKEALL because of build problems.Wolfgang Denk2006-07-21-1/+3
| | |
| * | Code cleanupWolfgang Denk2006-07-21-141/+139
| | |
| * | Update NetStar boardWolfgang Denk2006-07-21-41/+103
| | | | | | | | | | | | Patch by Ladislav Michl, 03 Nov 2005
| * | Make code better readable.Wolfgang Denk2006-07-21-1/+4
| | | | | | | | | | | | Patch by Ladislav Michl, 14 Sep 2005
| * | Enable initrd ATAG for xm250 board.Wolfgang Denk2006-07-21-3/+6
| | | | | | | | | | | | Patch by Josef Wagner, 05 Sep 2005
| * | Document CONFIG_CMDLINE_EDITING in README.Wolfgang Denk2006-07-21-0/+6
| | |
| * | Minor code cleanup.Wolfgang Denk2006-07-21-3/+3
| | |
| * | Add readline cmdline-editing extensionWolfgang Denk2006-07-21-0/+420
| | | | | | | | | | | | Patch by JinHua Luo, 01 Sep 2005
| * | Add support for friendly-arm SBC-2410X boardWolfgang Denk2006-07-21-4/+1155
| | | | | | | | | | | | Patch by JinHua Luo, 01 Sep 2005
| * | Fix multi-part image support on i386 platform.Wolfgang Denk2006-07-21-0/+9
| | | | | | | | | | | | Patch by David Updegraff, 19 Aug 2005
| * | Add support for KVME080 boardWolfgang Denk2006-07-21-3/+1026
| | | | | | | | | | | | Patch by Sangmoon Kim, 18 Aug 2005
| * | Fix patch attribution.Wolfgang Denk2006-07-21-1/+1
| | |
| * | Fix MIPS LE build problemWolfgang Denk2006-07-21-1/+4
| | | | | | | | | | | | Patch by Thomas Lange, 10 Aug 2005
| * | Check argument count in "mii" command.Wolfgang Denk2006-07-21-0/+8
| | | | | | | | | | | | Problem pointed out by Andrew Dyer, 13 Jun 2005
| * | * Cleanup TQM5200 board configurations:Wolfgang Denk2006-07-21-119/+166
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - make highboot configurations use environment at high end, too, to avoid flash fragmentation - always use redundand environment - don't enable video code for modules without graphics controller - provide useful (though different) mtdparts settings - get rid of CONFIG_CS_AUTOCONF which was always set anyway * Extend mkconfig tool to print more useful target name
| * | Add support for high-boot on TQM5200 and TQM5200S boards.Wolfgang Denk2006-07-19-5/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hint: the CPLD on the TQM5200 must be programmed with a software version supporting the high boot option! The new TQM5200S is already supporting this option. On the TQM5200 this option will be supported in configurations with MPC5200 rev B processors. To actually "high boot", set jumper X30 on the STK52xx. Patch by Martin Krause, 12 Jul 2006
| * | Add support for new TQM5200 revisionsWolfgang Denk2006-07-19-19/+150
| | | | | | | | | | | | | | | | | | | | | - Support for TQM5200S (short version without graphic controller) - Support for modules with 'N' type S29GL128N Spansion flashes (requires changes to flash layout) - Support for MPC5200B cpu (mostly support for second SDRAM bank)
| * | Fix support for PS/2 keyboard on TQM85xx boardsWolfgang Denk2006-07-19-20/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PS/2 keyobard driver for the TQM85xx modules only supports the internal DUART of the MPC85xx CPU. Since the MPC8560 doesn't include a DUART, the TQM8560 modules can't be used with the PS/2 keyboard controller on the STK85xx board. The PS/2 keyboard driver should work with the modules TQM8540, TQM8541 and TQM8555, but it only has been tested on a TQM8540, yet. Make sure the PS/2 controller on the STK85xx is programmed. Jumper settings: X66 1-2, 9-10; X61 2-3 Patch by Martin Krause, 21 Jun 2006
| * | Adjust RTC century handling on STK52xx board to match Linux driver.Wolfgang Denk2006-07-19-0/+5
| | | | | | | | | | | | Patch by Martin Krause, 12 Jun 2006
| * | Adjust filenames for USB update images on TRAB board.Wolfgang Denk2006-07-19-4/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | During an automatic update via USB stick, U-Boot searches for images with the name "firmware.img" and "kernel.img". This names are now changed to "firmw_01.img" and "kernl_01.img". This is done, to prevent updates of new boards (with the new macronics "c" step flashes) with old, incompatible firmware or kernel versions. Patch by Martin Krause, 21 Jun 2006
| * | Bugfix in VFD routine on TRAB board.Wolfgang Denk2006-07-19-13/+16
| | | | | | | | | | | | | | | | | | Make sure upper lext pixel can be set to blue, too (so far only red was possible). Patch by Martin Krause, 15 Feb 2006
| * | Enable buffered flash writes for TB5200 board.Wolfgang Denk2006-07-19-1/+3
| | |
| * | Fix some bugs in TRAB board flash driver.Wolfgang Denk2006-07-19-15/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - increase CFG_FLASH_ERASE_TOUT from 2 to 15 seconds - use CFG_FLASH_WRITE_TOUT for programming instead of CFG_FLASH_ERASE_TOUT - remove "Unlock Bypass" mode, because macronix flashes do not support this mode officially - fix flash reset command from 0x00FF to 0x00F0. 0x00FF is only specified for Intel compatible flashes, not for AMD compatible. Patch by Martin Krause, 15 Feb 2006
| * | Add additional error messages to flash driver on TRAB boardWolfgang Denk2006-07-19-1/+12
| | | | | | | | | | | | | | | (for erase errors and timeout errors) Patch by Martin Krause, 14 Feb 2006
| * | Add support for TB5200 boardWolfgang Denk2006-07-19-287/+871
| |/ | | | | | | | | | | | | | | The TB5200 ("Tinybox") is a small baseboard for the TQM5200 module integrated in a little aluminium case. Patch by Martin Krause, 8 Jun 2006 Some code cleanup
| * Enable buffered flash writes for TQM5200 board.Wolfgang Denk2006-07-18-1/+3
| |
| * Merge with /home/tur/proj/usb_sticks/u-bootWolfgang Denk2006-07-14-0/+6
| |\
| | * Fix problems with SanDisk Corporation Cruzer Micro USB memory stick.Bartlomiej Sieka2006-07-13-0/+6
| | |
| * | Update CHANGELOGWolfgang Denk2006-07-13-0/+13
| | |
| * | Merge with /home/mk/11-cmb1920/u-bootWolfgang Denk2006-07-13-29/+1387
| |\ \
| | * | Add support for TQM885D board.Markus Klotzbuecher2006-07-12-15/+528
| | | | | | | | | | | | | | | | | | | | | | | | Patch by Martin Krause, 20 Mar 2006 Signed-off-by: Martin Krause <martin.krause@tqs.de>
| | * | Bugfix in FEC initialisation:Markus Klotzbuecher2006-07-12-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All MII configuration is done via FEC1 registers. But MII_SPEED was configured according to FEC used. So if only FEC2 was used, this caused the real MII_SPEED register in FEC1 to stay uninitalised, what lead to "mii_send STUCK!" messages. Fix: always configure MII_SPEED on FEC1 only.
| | * | Support for spc1920 board.Markus Klotzbuecher2006-07-12-13/+856
| | |/ | | | | | | | | | Patch by Markus Klotzbuecher, 12 Jul 2006
| * | Cleanup duplicate definitions in MCC200 config file.Wolfgang Denk2006-07-13-5/+0
| |/
generated by cgit v1.1 at 2024-11-01 20:51:00 +0000