summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorWolfgang Denk <wd@pollux.denx.de>2006-07-19 13:50:38 +0200
committerWolfgang Denk <wd@pollux.denx.de>2006-07-19 13:50:38 +0200
commitb87dfd2854809ddcf4be54d772752e7ed137386f (patch)
treed10a0446c375a2961223f12f553a51422bff553a
parentf3e06df7e89a1b6ff6701d523b4beea6e3fa5159 (diff)
downloadu-boot-imx-b87dfd2854809ddcf4be54d772752e7ed137386f.zip
u-boot-imx-b87dfd2854809ddcf4be54d772752e7ed137386f.tar.gz
u-boot-imx-b87dfd2854809ddcf4be54d772752e7ed137386f.tar.bz2
Add support for TB5200 board
The TB5200 ("Tinybox") is a small baseboard for the TQM5200 module integrated in a little aluminium case. Patch by Martin Krause, 8 Jun 2006 Some code cleanup
-rw-r--r--CHANGELOG15
-rw-r--r--Makefile7
-rw-r--r--board/amcc/yucca/cmd_yucca.c2
-rw-r--r--board/amcc/yucca/flash.c2
-rw-r--r--board/amcc/yucca/init.S1
-rw-r--r--board/amcc/yucca/yucca.c1
-rw-r--r--board/gth2/config.mk1
-rw-r--r--board/gth2/ee_access.c82
-rw-r--r--board/gth2/ee_access.h2
-rw-r--r--board/gth2/ee_dev.h2
-rw-r--r--board/gth2/gth2.c18
-rw-r--r--board/gth2/lowlevel_init.S18
-rw-r--r--board/ppmc7xx/config.mk6
-rw-r--r--board/ppmc7xx/flash.c34
-rw-r--r--board/ppmc7xx/init.S214
-rw-r--r--board/ppmc7xx/ppmc7xx.c22
-rw-r--r--board/tqm5200/Makefile2
-rwxr-xr-xboard/tqm5200/cmd_stk52xx.c2
-rw-r--r--board/tqm5200/cmd_tb5200.c104
-rw-r--r--board/tqm5200/tqm5200.c10
-rw-r--r--board/tqm85xx/tqm85xx.c1
-rw-r--r--cpu/ppc4xx/serial.c2
-rw-r--r--cpu/ppc4xx/start.S2
-rw-r--r--drivers/Makefile2
-rw-r--r--drivers/tqm8xx_pcmcia.c8
-rw-r--r--include/configs/TB5200.h470
-rw-r--r--include/configs/gth2.h56
-rw-r--r--include/configs/ppmc7xx.h70
-rw-r--r--include/ns16550.h2
29 files changed, 871 insertions, 287 deletions
diff --git a/CHANGELOG b/CHANGELOG
index fb88164..3e6b1f9 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,11 @@
Changes since U-Boot 1.1.4:
======================================================================
+* Add support for TB5200 board
+ The TB5200 ("Tinybox") is a small baseboard for the TQM5200 module
+ integrated in a little aluminium case.
+ Patch by Martin Krause, 8 Jun 2006
+
* Enable buffered flash writes for TQM5200 board.
* Fix problems with SanDisk Corporation Cruzer Micro USB memory stick.
@@ -18,7 +23,7 @@ Changes since U-Boot 1.1.4:
* Add support for SPC1920 board.
Patch by Markus Klotzbuecher, 12 Jul 2006
-
+
* MCC200 board: support console on any one of the Quad UART ports.
* Fix error in flash protection calculation on MCC200 board.
@@ -60,14 +65,14 @@ Changes since U-Boot 1.1.4:
* VoiceBlue update: use new MTD flash partitioning methods, use more
reasonable TEXT_BASE, update default environment and enable keyed
autoboot.
- Patch by Ladislav Michl, 16. Aug 2005
+ Patch by Ladislav Michl, 16. Aug 2005
* Add forgotten changes for the PLEB 2 Board.
Patch by David Snowdon, 13. Aug 2005
* Add support for wrPPMC7xx/74xx boards
Patch by Richard Danter, 12 Aug 2005
-
+
* Add support for gth2 board
Patch by Thomas Lange, Aug 11 2005
@@ -89,7 +94,7 @@ Changes since U-Boot 1.1.4:
With this fix pin I2CSCL (PG6) is really configured as GPIO
so the clock pulses are really generated.
Patch by Martin Krause, 04 Apr 2006
-
+
* Fix DDR6 errata on TQM834x boards
Patch by Thomas Waehner, 07 Mar 2006
@@ -106,7 +111,7 @@ Changes since U-Boot 1.1.4:
has been programmed. Jumper Settings: X66 1-2, 9-10; X61 2-3
* Fix TRAB channel switching delay for trab_fkt.bin standalone applikation
- In tsc2000_read_channel() the delay after setting the multiplexer
+ In tsc2000_read_channel() the delay after setting the multiplexer
to a temperature channel is increased from 1,5 ms to 10 ms. This
is to allow the multiplexer inputs to stabilize after huge steps
of the input signal level.
diff --git a/Makefile b/Makefile
index 63f2175..5a42d53 100644
--- a/Makefile
+++ b/Makefile
@@ -360,6 +360,11 @@ spieval_config: unconfig
@echo "... with automatic CS configuration"
@./mkconfig -a spieval ppc mpc5xxx tqm5200
+TB5200_config: unconfig
+ @echo "#define CONFIG_CS_AUTOCONF">>include/config.h
+ @echo "... with automatic CS configuration"
+ @./mkconfig -a TB5200 ppc mpc5xxx tqm5200
+
MINI5200_config \
EVAL5200_config \
TOP5200_config: unconfig
@@ -1461,7 +1466,7 @@ ZUMA_config: unconfig
ppmc7xx_config: unconfig
@./mkconfig $(@:_config=) ppc 74xx_7xx ppmc7xx
-
+
#========================================================================
# ARM
#========================================================================
diff --git a/board/amcc/yucca/cmd_yucca.c b/board/amcc/yucca/cmd_yucca.c
index 9c7afb2..e698b20 100644
--- a/board/amcc/yucca/cmd_yucca.c
+++ b/board/amcc/yucca/cmd_yucca.c
@@ -30,7 +30,7 @@
#include <asm/byteorder.h>
extern void print_evb440spe_info(void);
-static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag,
+static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag,
int flag, int argc, char *argv[]);
extern int cmd_get_data_size(char* arg, int default_size);
diff --git a/board/amcc/yucca/flash.c b/board/amcc/yucca/flash.c
index c5a2e31..15b8a46 100644
--- a/board/amcc/yucca/flash.c
+++ b/board/amcc/yucca/flash.c
@@ -1004,7 +1004,7 @@ unsigned long flash_init(void)
}
} /*else if (index == 0) {*/
/* if (in8(FPGA_SETTING_REG) & FPGA_SET_REG_OP_CODE_FLASH_ABOVE)*/
-/* index = 8;*//* sram below op code flash -> new index 8*/
+/* index = 8;*/ /* sram below op code flash -> new index 8*/
/* }*/
DEBUGF("\n");
diff --git a/board/amcc/yucca/init.S b/board/amcc/yucca/init.S
index 8cf2636..cb28936 100644
--- a/board/amcc/yucca/init.S
+++ b/board/amcc/yucca/init.S
@@ -102,4 +102,3 @@ tlbtab:
tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I)
tlbtab_end
-
diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c
index 1ae3a54..ce1312c 100644
--- a/board/amcc/yucca/yucca.c
+++ b/board/amcc/yucca/yucca.c
@@ -1094,4 +1094,3 @@ unsigned long ppcMfsdr(unsigned long sdr_reg)
return (sdr_value);
}
-
diff --git a/board/gth2/config.mk b/board/gth2/config.mk
index 6d21ba1..2bc1338 100644
--- a/board/gth2/config.mk
+++ b/board/gth2/config.mk
@@ -39,4 +39,3 @@ TEXT_BASE = 0x90000000
endif
endif
endif
-
diff --git a/board/gth2/ee_access.c b/board/gth2/ee_access.c
index e293139..d4798c4 100644
--- a/board/gth2/ee_access.c
+++ b/board/gth2/ee_access.c
@@ -8,7 +8,7 @@
For documentaion, see data sheet for DS2438, 2438.pdf
By Thomas.Lange@corelatus.com 001025
-
+
Copyright (C) 2000-2005 Corelatus AB */
/* This program is free software; you can redistribute it and/or
@@ -105,7 +105,7 @@ static u8 make_new_crc( u8 Old_crc, u8 New_value ){
/* Compute a new checksum with new byte, using previous checksum as input
See DS app note 17, understanding and using cyclic redundancy checks...
Also see DS2438, page 11 */
- return( crc_lookup[Old_crc ^ New_value ]);
+ return( crc_lookup[Old_crc ^ New_value ]);
}
int ee_crc_ok( u8 *Buffer, int Len, u8 Crc ){
@@ -119,16 +119,16 @@ int ee_crc_ok( u8 *Buffer, int Len, u8 Crc ){
Curr_byte++;
}
E_DEBUG("Calculated CRC = 0x%x, read = 0x%x\n", Curr_crc, Crc);
-
+
if(Curr_crc == Crc){
- /* Good */
+ /* Good */
return(TRUE);
}
printk(KERN_ERR"EE checksum error, Calculated CRC = 0x%x, read = 0x%x\n", Curr_crc, Crc);
return(FALSE);
}
-static void
+static void
set_idle(void){
/* Send idle and keep start time
Continous 1 is idle */
@@ -136,7 +136,7 @@ set_idle(void){
}
-static int
+static int
do_cpu_reset(void){
/* Release reset and verify that chip responds with presence pulse */
int Retries=0;
@@ -146,10 +146,10 @@ do_cpu_reset(void){
/* Send reset */
WRITE_PORT(0);
udelay(RESET_LOW_TIME);
-
+
/* Release reset */
WRITE_PORT(1);
-
+
/* Wait for EEPROM to drive output */
udelay(PRESENCE_TIMEOUT);
if(!READ_PORT){
@@ -166,17 +166,17 @@ do_cpu_reset(void){
}
printk(KERN_ERR"eeprom did not respond when releasing reset\n");
-
+
/* Make sure chip releases pin */
udelay(PRESENCE_LOW_TIME);
/* Set to idle again */
set_idle();
-
+
return(-EIO);
}
-static u8
+static u8
read_cpu_byte(void){
/* Read a single byte from EEPROM
Read LSb first */
@@ -186,36 +186,36 @@ read_cpu_byte(void){
u32 Flags;
E_DEBUG("Reading byte\n");
-
+
for(i=0;i<8;i++){
/* Small delay between pulses */
udelay(1);
-#ifdef __KERNEL__
- /* Disable irq */
+#ifdef __KERNEL__
+ /* Disable irq */
save_flags(Flags);
cli();
-#endif
+#endif
/* Pull down pin short time to start read
See page 26 in data sheet */
-
+
WRITE_PORT(0);
udelay(READ_LOW);
WRITE_PORT(1);
-
+
/* Wait for chip to drive pin */
udelay(READ_TIMEOUT);
-
+
Value = READ_PORT;
if(Value)
Value=1;
#ifdef __KERNEL__
- /* Enable irq */
+ /* Enable irq */
restore_flags(Flags);
#endif
-
+
/* Wait for chip to release pin */
udelay(TOTAL_READ_LOW-READ_TIMEOUT);
@@ -230,30 +230,30 @@ read_cpu_byte(void){
return(Result);
}
-static void
+static void
write_cpu_byte(u8 Byte){
/* Write a single byte to EEPROM
Write LSb first */
int i;
int Value;
u32 Flags;
-
+
E_DEBUG("Writing byte 0x%x\n",Byte);
-
+
for(i=0;i<8;i++){
/* Small delay between pulses */
udelay(1);
Value = Byte&1;
-
+
#ifdef __KERNEL__
- /* Disable irq */
+ /* Disable irq */
save_flags(Flags);
cli();
-#endif
+#endif
/* Pull down pin short time for a 1, long time for a 0
See page 26 in data sheet */
-
+
WRITE_PORT(0);
if(Value){
/* Write a 1 */
@@ -267,54 +267,54 @@ write_cpu_byte(u8 Byte){
WRITE_PORT(1);
#ifdef __KERNEL__
- /* Enable irq */
+ /* Enable irq */
restore_flags(Flags);
#endif
if(Value)
/* Wait for chip to read the 1 */
udelay(TOTAL_WRITE_LOW-WRITE_1_LOW);
-
+
/* E_DEBUG("Wrote %d\n",Value); */
Byte>>=1;
}
}
int ee_do_cpu_command( u8 *Tx, int Tx_len, u8 *Rx, int Rx_len, int Send_skip ){
- /* Execute this command string, including
+ /* Execute this command string, including
giving reset and setting to idle after command
- if Rx_len is set, we read out data from EEPROM */
+ if Rx_len is set, we read out data from EEPROM */
int i;
E_DEBUG("Command, Tx_len %d, Rx_len %d\n", Tx_len, Rx_len );
-
+
if(do_cpu_reset()){
/* Failed! */
return(-EIO);
}
if(Send_skip)
- /* Always send SKIP_ROM first to tell chip we are sending a command,
+ /* Always send SKIP_ROM first to tell chip we are sending a command,
except when we read out rom data for chip */
write_cpu_byte(SKIP_ROM);
-
+
/* Always have Tx data */
for(i=0;i<Tx_len;i++){
write_cpu_byte(Tx[i]);
}
-
+
if(Rx_len){
for(i=0;i<Rx_len;i++){
Rx[i]=read_cpu_byte();
}
}
-
+
set_idle();
E_DEBUG("Command done\n");
return(0);
-}
+}
int ee_init_cpu_data(void){
int i;
@@ -323,7 +323,7 @@ int ee_init_cpu_data(void){
/* Leave it floting since altera is driving the same pin */
set_idle();
- /* Copy all User EEPROM data to scratchpad */
+ /* Copy all User EEPROM data to scratchpad */
for(i=0;i<USER_PAGES;i++){
Tx[0]=RECALL_MEMORY;
Tx[1]=EE_USER_PAGE_0+i;
@@ -332,16 +332,16 @@ int ee_init_cpu_data(void){
/* Make sure chip doesnt store measurements in NVRAM */
Tx[0]=WRITE_SCRATCHPAD;
- Tx[1]=0; /* Page */
+ Tx[1]=0; /* Page */
Tx[2]=9;
if(ee_do_cpu_command(Tx,3,NULL,0,TRUE)) return(-EIO);
Tx[0]=COPY_SCRATCHPAD;
if(ee_do_cpu_command(Tx,2,NULL,0,TRUE)) return(-EIO);
-
+
for(i=0;i<10;i++){
udelay(1000);
}
-
+
return(0);
}
diff --git a/board/gth2/ee_access.h b/board/gth2/ee_access.h
index c21730e..926199d 100644
--- a/board/gth2/ee_access.h
+++ b/board/gth2/ee_access.h
@@ -21,7 +21,7 @@ int ee_crc_ok( u8 *Buffer, int Len, u8 Crc );
#define EE_BUSY 0x40000000
#define EE_ERROR 0x20000000
-/* Commands */
+/* Commands */
#define EE_CMD_NOP 0
#define EE_CMD_INIT_RES 1
#define EE_CMD_WR_BYTE 2
diff --git a/board/gth2/ee_dev.h b/board/gth2/ee_dev.h
index acc3418..89ef2f8 100644
--- a/board/gth2/ee_dev.h
+++ b/board/gth2/ee_dev.h
@@ -21,7 +21,7 @@
#ifndef INCeedevh
#define INCeedevh
-#define E_DEBUG(fmt,args...) if( Debug ) printk(KERN_DEBUG"EE: " fmt, ##args)
+#define E_DEBUG(fmt,args...) if( Debug ) printk(KERN_DEBUG"EE: " fmt, ##args)
/* MIPS */
#define WRITE_PORT(Value) write_gpio_data(Value)
diff --git a/board/gth2/gth2.c b/board/gth2/gth2.c
index 77fc5b4..ffeaf58 100644
--- a/board/gth2/gth2.c
+++ b/board/gth2/gth2.c
@@ -61,13 +61,13 @@ void init_log_serial(void){
u32 *serial_log_offsetp = (u32*)SERIAL_LOG_BUFFER;
/* Copy buffer from last run */
- memcpy(serial_log_buffer + 4096,
- serial_log_buffer,
+ memcpy(serial_log_buffer + 4096,
+ serial_log_buffer,
4096);
memset(serial_log_buffer, 0, 4096);
- *serial_log_offsetp = 4;
+ *serial_log_offsetp = 4;
}
@@ -118,7 +118,7 @@ void set_ledcard(u32 value){
udelay(1);
*sys_outputclr = GPIO_LEDCLK;
udelay(1);
-
+
value<<=1;
}
/* Data is enable output */
@@ -228,7 +228,7 @@ static void write_bootdata (volatile u16 * addr, u8 System, u8 Count)
printf ("Invalid boot count %u, setting 1\n", Count);
Count = 1;
}
-
+
printf ("Boot attempt %d\n", Count);
data = (System << 8) | Count;
@@ -241,9 +241,9 @@ static void write_bootdata (volatile u16 * addr, u8 System, u8 Count)
}
static int random_system(void){
- /* EEPROM read failed. Just try to choose one
+ /* EEPROM read failed. Just try to choose one
system release and hope it works */
-
+
/* FIXME */
return(SYSTEM_BOOT);
}
@@ -320,8 +320,8 @@ static void check_boot_tries (void)
data = *addr;
system = data >> 8;
count = data & 0xFF;
- if ((system != SYSTEM_BOOT) &
- (system != SYSTEM2_BOOT) &
+ if ((system != SYSTEM_BOOT) &
+ (system != SYSTEM2_BOOT) &
(system != FAILSAFE_BOOT)) {
printf ("*** Wrong system %d\n", system);
system = FAILSAFE_BOOT;
diff --git a/board/gth2/lowlevel_init.S b/board/gth2/lowlevel_init.S
index 62e3657..983ff70 100644
--- a/board/gth2/lowlevel_init.S
+++ b/board/gth2/lowlevel_init.S
@@ -197,11 +197,11 @@ noCacheJump:
/* RCE2 CP Altera */
li t0, MEM_STCFG2
- li t1, 0x00000280 /* BE, EW */
+ li t1, 0x00000280 /* BE, EW */
sw t1, 0(t0)
li t0, MEM_STTIME2
- li t1, 0x0303000c
+ li t1, 0x0303000c
sw t1, 0(t0)
li t0, MEM_STADDR2
@@ -210,11 +210,11 @@ noCacheJump:
/* RCE3 DP Altera */
li t0, MEM_STCFG3
- li t1, 0x00000280 /* BE, EW */
+ li t1, 0x00000280 /* BE, EW */
sw t1, 0(t0)
li t0, MEM_STTIME3
- li t1, 0x0303000c
+ li t1, 0x0303000c
sw t1, 0(t0)
li t0, MEM_STADDR3
@@ -428,14 +428,14 @@ mt0: sw t0, 0(t0)
li t0, 0x80000000
li t1, 0xFFF000 /* 64 MB */
mt1: lw t2, 0(t0)
- bne t0, t2, memhang
+ bne t0, t2, memhang
add t1, -1
add t0, 4
bne t1, zero, mt1
nop
nop
.globl clearmem
-clearmem:
+clearmem:
/* Clear memory */
li t0, 0x80000000
li t1, 0xFFF000 /* 64 MB */
@@ -445,10 +445,10 @@ mtc: sw zero, 0(t0)
bne t1, zero, mtc
nop
nop
-memtestend:
+memtestend:
j ra
nop
-
-memhang:
+
+memhang:
b memhang
nop
diff --git a/board/ppmc7xx/config.mk b/board/ppmc7xx/config.mk
index bcb6c81..d8eac77 100644
--- a/board/ppmc7xx/config.mk
+++ b/board/ppmc7xx/config.mk
@@ -1,6 +1,6 @@
#
# (C) Copyright 2005
-# Richard Danter, Wind River Systems
+# Richard Danter, Wind River Systems
#
# (C) Copyright 2000
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -24,10 +24,6 @@
# MA 02111-1307 USA
#
-#
-#
-#
-
TEXT_BASE = 0xFFF00000
TEXT_END = 0xFFF40000
PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
diff --git a/board/ppmc7xx/flash.c b/board/ppmc7xx/flash.c
index 1cbcadc..4be6f13 100644
--- a/board/ppmc7xx/flash.c
+++ b/board/ppmc7xx/flash.c
@@ -1,10 +1,10 @@
/*
* flash.c
* -------
- *
+ *
* Flash programming routines for the Wind River PPMC 74xx/7xx
* based on flash.c from the TQM8260 board.
- *
+ *
* By Richard Danter (richard.danter@windriver.com)
* Copyright (C) 2005 Wind River Systems
*/
@@ -27,13 +27,13 @@ void flash_reset (void)
{
unsigned long msr;
DWORD cmd_reset = 0x00F000F000F000F0LL;
-
+
if (flash_info[0].flash_id != FLASH_UNKNOWN) {
msr = get_msr ();
set_msr (msr | MSR_FP);
write_via_fpu ((DWORD*)flash_info[0].start[0], &cmd_reset );
-
+
set_msr (msr);
}
}
@@ -50,16 +50,16 @@ ulong flash_get_size (ulong baseaddr, flash_info_t * info)
/* Enable FPU */
msr = get_msr ();
- set_msr (msr | MSR_FP);
-
+ set_msr (msr | MSR_FP);
+
/* Write auto-select command sequence */
write_via_fpu ((DWORD*)(baseaddr + (0x0555 << 3)), &cmd_select[0] );
write_via_fpu ((DWORD*)(baseaddr + (0x02AA << 3)), &cmd_select[1] );
write_via_fpu ((DWORD*)(baseaddr + (0x0555 << 3)), &cmd_select[2] );
-
+
/* Restore FPU */
set_msr (msr);
-
+
/* Read manufacturer ID */
flashtest = *(volatile DWORD*)baseaddr;
switch ((int)flashtest) {
@@ -70,7 +70,7 @@ ulong flash_get_size (ulong baseaddr, flash_info_t * info)
info->flash_id = FLASH_MAN_FUJ;
break;
default:
- /* No, faulty or unknown flash */
+ /* No, faulty or unknown flash */
info->flash_id = FLASH_UNKNOWN;
info->sector_count = 0;
info->size = 0;
@@ -291,7 +291,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
DWORD cmd_erase[6] = { 0x00AA00AA00AA00AALL, 0x0055005500550055LL,
0x0080008000800080LL, 0x00AA00AA00AA00AALL,
0x0055005500550055LL, 0x0030003000300030LL };
-
+
if ((s_first < 0) || (s_first > s_last)) {
if (info->flash_id == FLASH_UNKNOWN) {
printf ("- missing\n");
@@ -319,7 +319,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
/* Enable FPU */
msr = get_msr();
set_msr ( msr | MSR_FP );
-
+
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts ();
@@ -344,7 +344,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
/* Restore FPU */
set_msr (msr);
-
+
/* wait at least 80us - let's wait 1 ms */
udelay (1000);
@@ -373,7 +373,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
DONE:
/* reset to read mode */
flash_reset ();
-
+
printf (" done\n");
return 0;
}
@@ -446,7 +446,7 @@ static int write_dword (flash_info_t * info, ulong dest, unsigned char *pdata)
DWORD data;
DWORD cmd_write[3] = { 0x00AA00AA00AA00AALL, 0x0055005500550055LL,
0x00A000A000A000A0LL };
-
+
for (data = 0, i = 0; i < 8; i++)
data = (data << 8) + *pdata++;
@@ -454,11 +454,11 @@ static int write_dword (flash_info_t * info, ulong dest, unsigned char *pdata)
if ((*(DWORD*)dest & data) != data) {
return (2);
}
-
+
/* Enable FPU */
msr = get_msr();
set_msr( msr | MSR_FP );
-
+
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts ();
@@ -473,7 +473,7 @@ static int write_dword (flash_info_t * info, ulong dest, unsigned char *pdata)
/* Restore FPU */
set_msr(msr);
-
+
/* data polling for D7 */
start = get_timer (0);
while (*(volatile DWORD*)dest != data ) {
diff --git a/board/ppmc7xx/init.S b/board/ppmc7xx/init.S
index e4ed7a6..99a818a 100644
--- a/board/ppmc7xx/init.S
+++ b/board/ppmc7xx/init.S
@@ -21,314 +21,314 @@ board_asm_init:
ori r4,r4,0x0000
lis r5,0xFEE0
ori r5,r5,0x0000
- lis r3,0x8000 # ADDR_00
+ lis r3,0x8000 # ADDR_00
ori r3,r3,0x0000
stwbrx r3,0,r4
- li r3,0x1057 # VENDOR
+ li r3,0x1057 # VENDOR
li r8, 0x0
sthbrx r3,r8,r5
- lis r3,0x8000 # ADDR_02
+ lis r3,0x8000 # ADDR_02
ori r3,r3,0x0002
stwbrx r3,0,r4
- li r3,0x0004 # ID
+ li r3,0x0004 # ID
li r8, 0x2
sthbrx r3,r8,r5
- lis r3,0x8000 # ADDR_04
+ lis r3,0x8000 # ADDR_04
ori r3,r3,0x0004
stwbrx r3,0,r4
- li r3,0x0006 # PCICMD
+ li r3,0x0006 # PCICMD
li r8, 0x0
sthbrx r3,r8,r5
- lis r3,0x8000 # ADDR_06
+ lis r3,0x8000 # ADDR_06
ori r3,r3,0x0006
stwbrx r3,0,r4
- li r3,0x00A0 # PCISTAT
+ li r3,0x00A0 # PCISTAT
li r8, 0x2
sthbrx r3,r8,r5
- lis r3,0x8000 # ADDR_08
+ lis r3,0x8000 # ADDR_08
ori r3,r3,0x0008
stwbrx r3,0,r4
- li r3,0x10 # REVID
+ li r3,0x10 # REVID
stb r3,0x0(r5)
- lis r3,0x8000 # ADDR_09
+ lis r3,0x8000 # ADDR_09
ori r3,r3,0x0009
stwbrx r3,0,r4
- li r3,0x00 # PROGIR
+ li r3,0x00 # PROGIR
stb r3,0x1(r5)
- lis r3,0x8000 # ADDR_0A
+ lis r3,0x8000 # ADDR_0A
ori r3,r3,0x000A
stwbrx r3,0,r4
- li r3,0x00 # SUBCCODE
+ li r3,0x00 # SUBCCODE
stb r3,0x2(r5)
- lis r3,0x8000 # ADDR_0B
+ lis r3,0x8000 # ADDR_0B
ori r3,r3,0x000B
stwbrx r3,0,r4
- li r3,0x06 # PBCCR
+ li r3,0x06 # PBCCR
stb r3,0x3(r5)
- lis r3,0x8000 # ADDR_0C
+ lis r3,0x8000 # ADDR_0C
ori r3,r3,0x000C
stwbrx r3,0,r4
- li r3,0x08 # PCLSR
+ li r3,0x08 # PCLSR
stb r3,0x0(r5)
- lis r3,0x8000 # ADDR_0D
+ lis r3,0x8000 # ADDR_0D
ori r3,r3,0x000D
stwbrx r3,0,r4
- li r3,0x00 # PLTR
+ li r3,0x00 # PLTR
stb r3,0x1(r5)
- lis r3,0x8000 # ADDR_0E
+ lis r3,0x8000 # ADDR_0E
ori r3,r3,0x000E
stwbrx r3,0,r4
- li r3,0x00 # HEADTYPE
+ li r3,0x00 # HEADTYPE
stb r3,0x2(r5)
- lis r3,0x8000 # ADDR_0F
+ lis r3,0x8000 # ADDR_0F
ori r3,r3,0x000F
stwbrx r3,0,r4
- li r3,0x00 # BISTCTRL
+ li r3,0x00 # BISTCTRL
stb r3,0x3(r5)
- lis r3,0x8000 # ADDR_10
+ lis r3,0x8000 # ADDR_10
ori r3,r3,0x0010
stwbrx r3,0,r4
- lis r3,0x0000 # LMBAR
+ lis r3,0x0000 # LMBAR
ori r3,r3,0x0008
li r8, 0x0
stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_14
+ lis r3,0x8000 # ADDR_14
ori r3,r3,0x0014
stwbrx r3,0,r4
- lis r3,0xF000 # PCSRBAR
+ lis r3,0xF000 # PCSRBAR
ori r3,r3,0x0000
li r8, 0x0
stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_3C
+ lis r3,0x8000 # ADDR_3C
ori r3,r3,0x003C
stwbrx r3,0,r4
- li r3,0x00 # ILR
+ li r3,0x00 # ILR
stb r3,0x0(r5)
- lis r3,0x8000 # ADDR_3D
+ lis r3,0x8000 # ADDR_3D
ori r3,r3,0x003D
stwbrx r3,0,r4
- li r3,0x01 # INTPIN
+ li r3,0x01 # INTPIN
stb r3,0x1(r5)
- lis r3,0x8000 # ADDR_3E
+ lis r3,0x8000 # ADDR_3E
ori r3,r3,0x003E
stwbrx r3,0,r4
- li r3,0x00 # MIN_GNT
+ li r3,0x00 # MIN_GNT
stb r3,0x2(r5)
- lis r3,0x8000 # ADDR_3F
+ lis r3,0x8000 # ADDR_3F
ori r3,r3,0x003F
stwbrx r3,0,r4
- li r3,0x00 # MAX_LAT
+ li r3,0x00 # MAX_LAT
stb r3,0x3(r5)
- lis r3,0x8000 # ADDR_40
+ lis r3,0x8000 # ADDR_40
ori r3,r3,0x0040
stwbrx r3,0,r4
- li r3,0x00 # BUSNB
+ li r3,0x00 # BUSNB
stb r3,0x0(r5)
- lis r3,0x8000 # ADDR_41
+ lis r3,0x8000 # ADDR_41
ori r3,r3,0x0041
stwbrx r3,0,r4
- li r3,0x00 # SBUSNB
+ li r3,0x00 # SBUSNB
stb r3,0x1(r5)
- lis r3,0x8000 # ADDR_46
+ lis r3,0x8000 # ADDR_46
ori r3,r3,0x0046
stwbrx r3,0,r4
-# li r3,0xE080 # PCIARB
- li r3,-0x1F80 # PCIARB
+# li r3,0xE080 # PCIARB
+ li r3,-0x1F80 # PCIARB
li r8, 0x2
sthbrx r3,r8,r5
- lis r3,0x8000 # ADDR_70
+ lis r3,0x8000 # ADDR_70
ori r3,r3,0x0070
stwbrx r3,0,r4
- li r3,0x0000 # PMCR1
+ li r3,0x0000 # PMCR1
li r8, 0x0
sthbrx r3,r8,r5
- lis r3,0x8000 # ADDR_72
+ lis r3,0x8000 # ADDR_72
ori r3,r3,0x0072
stwbrx r3,0,r4
- li r3,0xC0 # PMCR2
+ li r3,0xC0 # PMCR2
stb r3,0x2(r5)
- lis r3,0x8000 # ADDR_73
+ lis r3,0x8000 # ADDR_73
ori r3,r3,0x0073
stwbrx r3,0,r4
- li r3,0xEF # ODCR
+ li r3,0xEF # ODCR
stb r3,0x3(r5)
- lis r3,0x8000 # ADDR_74
+ lis r3,0x8000 # ADDR_74
ori r3,r3,0x0074
stwbrx r3,0,r4
- li r3,0x7D00 # CLKDCR
+ li r3,0x7D00 # CLKDCR
li r8, 0x0
sthbrx r3,r8,r5
- lis r3,0x8000 # ADDR_76
+ lis r3,0x8000 # ADDR_76
ori r3,r3,0x0076
stwbrx r3,0,r4
- li r3,0x00 # MDCR
+ li r3,0x00 # MDCR
stb r3,0x2(r5)
lis r6,0xFCE0
ori r6,r6,0x0000 # r6 is the EUMBAR Base Address
- lis r3,0x8000 # ADDR_78
+ lis r3,0x8000 # ADDR_78
ori r3,r3,0x0078
stwbrx r3,0,r4
- lis r3,0xFCE0 # EUMBBAR
+ lis r3,0xFCE0 # EUMBBAR
ori r3,r3,0x0000
li r8, 0x0
stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_80
+ lis r3,0x8000 # ADDR_80
ori r3,r3,0x0080
stwbrx r3,0,r4
- lis r3,0xFFFF # MSADDR1
+ lis r3,0xFFFF # MSADDR1
ori r3,r3,0x4000
li r8, 0x0
stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_84
+ lis r3,0x8000 # ADDR_84
ori r3,r3,0x0084
stwbrx r3,0,r4
- lis r3,0xFFFF # MSADDR2
+ lis r3,0xFFFF # MSADDR2
ori r3,r3,0xFFFF
li r8, 0x0
stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_88
+ lis r3,0x8000 # ADDR_88
ori r3,r3,0x0088
stwbrx r3,0,r4
- lis r3,0x0303 # EMSADDR1
+ lis r3,0x0303 # EMSADDR1
ori r3,r3,0x0000
li r8, 0x0
stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_8C
+ lis r3,0x8000 # ADDR_8C
ori r3,r3,0x008C
stwbrx r3,0,r4
- lis r3,0x0303 # EMSADDR2
+ lis r3,0x0303 # EMSADDR2
ori r3,r3,0x0303
li r8, 0x0
stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_90
+ lis r3,0x8000 # ADDR_90
ori r3,r3,0x0090
stwbrx r3,0,r4
- lis r3,0xFFFF # EMEADDR1
+ lis r3,0xFFFF # EMEADDR1
ori r3,r3,0x7F3F
li r8, 0x0
stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_94
+ lis r3,0x8000 # ADDR_94
ori r3,r3,0x0094
stwbrx r3,0,r4
- lis r3,0xFFFF # EMEADDR2
+ lis r3,0xFFFF # EMEADDR2
ori r3,r3,0xFFFF
li r8, 0x0
stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_98
+ lis r3,0x8000 # ADDR_98
ori r3,r3,0x0098
stwbrx r3,0,r4
- lis r3,0x0303 # EXTEMEM1
+ lis r3,0x0303 # EXTEMEM1
ori r3,r3,0x0000
li r8, 0x0
stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_9C
+ lis r3,0x8000 # ADDR_9C
ori r3,r3,0x009C
stwbrx r3,0,r4
- lis r3,0x0303 # EXTEMEM2
+ lis r3,0x0303 # EXTEMEM2
ori r3,r3,0x0303
li r8, 0x0
stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_A0
+ lis r3,0x8000 # ADDR_A0
ori r3,r3,0x00A0
stwbrx r3,0,r4
- li r3,0x03 # MEMBNKEN
+ li r3,0x03 # MEMBNKEN
stb r3,0x0(r5)
- lis r3,0x8000 # ADDR_A3
+ lis r3,0x8000 # ADDR_A3
ori r3,r3,0x00A3
stwbrx r3,0,r4
- li r3,0x00 # MEMPMODE
+ li r3,0x00 # MEMPMODE
stb r3,0x3(r5)
- lis r3,0x8000 # ADDR_B8
+ lis r3,0x8000 # ADDR_B8
ori r3,r3,0x00B8
stwbrx r3,0,r4
- li r3,0x00 # ECCCNT
+ li r3,0x00 # ECCCNT
stb r3,0x0(r5)
- lis r3,0x8000 # ADDR_B9
+ lis r3,0x8000 # ADDR_B9
ori r3,r3,0x00B9
stwbrx r3,0,r4
- li r3,0x00 # ECCTRG
+ li r3,0x00 # ECCTRG
stb r3,0x1(r5)
- lis r3,0x8000 # ADDR_C0
+ lis r3,0x8000 # ADDR_C0
ori r3,r3,0x00C0
stwbrx r3,0,r4
- li r3,0xFF # ERRENR1
+ li r3,0xFF # ERRENR1
stb r3,0x0(r5)
- lis r3,0x8000 # ADDR_C1
+ lis r3,0x8000 # ADDR_C1
ori r3,r3,0x00C1
stwbrx r3,0,r4
- li r3,0x00 # ERRDR1
+ li r3,0x00 # ERRDR1
stb r3,0x1(r5)
- lis r3,0x8000 # ADDR_C3
+ lis r3,0x8000 # ADDR_C3
ori r3,r3,0x00C3
stwbrx r3,0,r4
- li r3,0x50 # IPBESR
+ li r3,0x50 # IPBESR
stb r3,0x3(r5)
- lis r3,0x8000 # ADDR_C4
+ lis r3,0x8000 # ADDR_C4
ori r3,r3,0x00C4
stwbrx r3,0,r4
- li r3,0xBF # ERRENR2
+ li r3,0xBF # ERRENR2
stb r3,0x0(r5)
- lis r3,0x8000 # ADDR_C5
+ lis r3,0x8000 # ADDR_C5
ori r3,r3,0x00C5
stwbrx r3,0,r4
- li r3,0x00 # ERRDR2
+ li r3,0x00 # ERRDR2
stb r3,0x1(r5)
- lis r3,0x8000 # ADDR_C7
+ lis r3,0x8000 # ADDR_C7
ori r3,r3,0x00C7
stwbrx r3,0,r4
- li r3,0x00 # PCIBESR
+ li r3,0x00 # PCIBESR
stb r3,0x3(r5)
- lis r3,0x8000 # ADDR_C8
+ lis r3,0x8000 # ADDR_C8
ori r3,r3,0x00C8
stwbrx r3,0,r4
- lis r3,0x0000 # BERRADDR
+ lis r3,0x0000 # BERRADDR
ori r3,r3,0xE0FE
li r8, 0x0
stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_E0
+ lis r3,0x8000 # ADDR_E0
ori r3,r3,0x00E0
stwbrx r3,0,r4
- li r3,0xC0 # AMBOR
+ li r3,0xC0 # AMBOR
stb r3,0x0(r5)
- lis r3,0x8000 # ADDR_F4
+ lis r3,0x8000 # ADDR_F4
ori r3,r3,0x00F4
stwbrx r3,0,r4
- lis r3,0x0000 # MCCR2
+ lis r3,0x0000 # MCCR2
ori r3,r3,0x020C
li r8, 0x0
stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_F8
+ lis r3,0x8000 # ADDR_F8
ori r3,r3,0x00F8
stwbrx r3,0,r4
- lis r3,0x0230 # MCCR3
+ lis r3,0x0230 # MCCR3
ori r3,r3,0x0000
li r8, 0x0
stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_FC
+ lis r3,0x8000 # ADDR_FC
ori r3,r3,0x00FC
stwbrx r3,0,r4
- lis r3,0x2532 # MCCR4
+ lis r3,0x2532 # MCCR4
ori r3,r3,0x2220
li r8, 0x0
stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_F0
+ lis r3,0x8000 # ADDR_F0
ori r3,r3,0x00F0
stwbrx r3,0,r4
- lis r3,0xFFC8 # MCCR1
+ lis r3,0xFFC8 # MCCR1
ori r3,r3,0x0000
li r8, 0x0
stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_A8
+ lis r3,0x8000 # ADDR_A8
ori r3,r3,0x00A8
stwbrx r3,0,r4
- lis r3,0xFF14 # PICR1
+ lis r3,0xFF14 # PICR1
ori r3,r3,0x1CC8
li r8, 0x0
stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_AC
+ lis r3,0x8000 # ADDR_AC
ori r3,r3,0x00AC
stwbrx r3,0,r4
- lis r3,0x0000 # PICR2
+ lis r3,0x0000 # PICR2
ori r3,r3,0x0000
li r8, 0x0
stwbrx r3,r8,r5
diff --git a/board/ppmc7xx/ppmc7xx.c b/board/ppmc7xx/ppmc7xx.c
index 0597c72..402ac5e 100644
--- a/board/ppmc7xx/ppmc7xx.c
+++ b/board/ppmc7xx/ppmc7xx.c
@@ -1,9 +1,9 @@
/*
* ppmc7xx.c
* ---------
- *
+ *
* Main board-specific routines for Wind River PPMC 7xx/74xx board.
- *
+ *
* By Richard Danter (richard.danter@windriver.com)
* Copyright (C) 2005 Wind River Systems
*/
@@ -24,7 +24,7 @@ extern void _start_warm(void);
/*
* initdram()
- *
+ *
* This function normally initialises the (S)DRAM of the system. For this board
* the SDRAM was already initialised by board_asm_init (see init.S) so we just
* return the size of RAM.
@@ -37,12 +37,12 @@ long initdram( int board_type )
/*
* after_reloc()
- *
+ *
* This is called after U-Boot has been copied from Flash/ROM to RAM. It gives
* us an opportunity to do some additional setup before the rest of the system
* is initialised. We don't need to do anything, so we just call board_init_r()
* which should never return.
- */
+ */
void after_reloc( ulong dest_addr, gd_t* gd )
{
/* Jump to the main U-Boot board init code */
@@ -52,7 +52,7 @@ void after_reloc( ulong dest_addr, gd_t* gd )
/*
* checkboard()
- *
+ *
* We could do some board level checks here, such as working out what version
* it is, but for this board we simply display it's name (on the console).
*/
@@ -65,7 +65,7 @@ int checkboard( void )
/*
* misc_init_r
- *
+ *
* Used for other setup which needs to be done late in the bring-up phase.
*/
int misc_init_r( void )
@@ -78,27 +78,27 @@ int misc_init_r( void )
/* Enable the I-Cache */
icache_enable();
-
+
return 0;
}
/*
* do_reset()
- *
+ *
* Shell command to reset the board.
*/
void do_reset( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] )
{
printf( "Resetting...\n" );
-
+
/* Disabe and invalidate cache */
icache_disable();
dcache_disable();
/* Jump to warm start (in RAM) */
_start_warm();
-
+
/* Should never get here */
while(1);
}
diff --git a/board/tqm5200/Makefile b/board/tqm5200/Makefile
index ab0ff1a..9a1ea48 100644
--- a/board/tqm5200/Makefile
+++ b/board/tqm5200/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
-OBJS := $(BOARD).o cmd_stk52xx.o
+OBJS := $(BOARD).o cmd_stk52xx.o cmd_tb5200.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
diff --git a/board/tqm5200/cmd_stk52xx.c b/board/tqm5200/cmd_stk52xx.c
index 8b9057f..2326a28 100755
--- a/board/tqm5200/cmd_stk52xx.c
+++ b/board/tqm5200/cmd_stk52xx.c
@@ -30,6 +30,7 @@
#include <command.h>
#if (CONFIG_COMMANDS & CFG_CMD_BSP)
+#if defined (CONFIG_STK52XX)
#define DEFAULT_VOL 45
#define DEFAULT_FREQ 500
@@ -60,7 +61,6 @@ static int spi_transmit(unsigned char data);
static void pcm1772_write_reg(unsigned char addr, unsigned char data);
static void set_attenuation(unsigned char attenuation);
-#ifdef CONFIG_STK52XX
static void spi_init(void)
{
struct mpc5xxx_spi *spi = (struct mpc5xxx_spi*)MPC5XXX_SPI;
diff --git a/board/tqm5200/cmd_tb5200.c b/board/tqm5200/cmd_tb5200.c
new file mode 100644
index 0000000..8784b1f
--- /dev/null
+++ b/board/tqm5200/cmd_tb5200.c
@@ -0,0 +1,104 @@
+/*
+ * (C) Copyright 2005 - 2006
+ * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * TB5200 specific functions
+ */
+/*#define DEBUG*/
+
+#include <common.h>
+#include <command.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_BSP)
+#if defined (CONFIG_TB5200)
+
+#define SM501_PANEL_DISPLAY_CONTROL 0x00080000UL
+
+static void led_init(void)
+{
+ struct mpc5xxx_gpt_0_7 *gpt = (struct mpc5xxx_gpt_0_7 *)MPC5XXX_GPT;
+
+ /* configure timer 4 for simple GPIO output */
+ gpt->gpt4.emsr |= 0x00000024;
+}
+
+int cmd_led(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ struct mpc5xxx_gpt_0_7 *gpt = (struct mpc5xxx_gpt_0_7 *)MPC5XXX_GPT;
+
+ led_init();
+
+ if (strcmp (argv[1], "on") == 0) {
+ debug ("switch status LED on\n");
+ gpt->gpt4.emsr |= (1 << 4);
+ } else if (strcmp (argv[1], "off") == 0) {
+ debug ("switch status LED off\n");
+ gpt->gpt4.emsr &= ~(1 << 4);
+ } else {
+ printf ("Usage:\nled on/off\n");
+ return 1;
+ }
+
+ return 0;
+}
+
+static void sm501_backlight (unsigned int state)
+{
+ if (state == 1) {
+ *(vu_long *)(SM501_MMIO_BASE+SM501_PANEL_DISPLAY_CONTROL) |=
+ (1 << 26) | (1 << 27);
+ } else if (state == 0)
+ *(vu_long *)(SM501_MMIO_BASE+SM501_PANEL_DISPLAY_CONTROL) &=
+ ~((1 << 26) | (1 << 27));
+}
+
+int cmd_backlight(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ if (strcmp (argv[1], "on") == 0) {
+ debug ("switch backlight on\n");
+ sm501_backlight (1);
+ } else if (strcmp (argv[1], "off") == 0) {
+ debug ("switch backlight off\n");
+ sm501_backlight (0);
+ } else {
+ printf ("Usage:\nbacklight on/off\n");
+ return 1;
+ }
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ led , 2, 1, cmd_led,
+ "led - switch status LED on or off\n",
+ "on/off\n"
+);
+
+U_BOOT_CMD(
+ backlight , 2, 1, cmd_backlight,
+ "backlight - switch backlight on or off\n",
+ "on/off\n"
+ );
+
+#endif /* CONFIG_STK52XX */
+#endif /* CFG_CMD_BSP */
diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c
index 310abd2..c6309e3 100644
--- a/board/tqm5200/tqm5200.c
+++ b/board/tqm5200/tqm5200.c
@@ -260,6 +260,9 @@ int checkboard (void)
#if defined (CONFIG_STK52XX)
puts (" on a STK52XX baseboard\n");
#endif
+#if defined (CONFIG_TB5200)
+ puts (" on a TB5200 baseboard\n");
+#endif
return 0;
}
@@ -567,10 +570,15 @@ void video_get_info_str (int line_number, char *info)
{
if (line_number == 1) {
strcpy (info, " Board: TQM5200 (TQ-Components GmbH)");
-#if defined (CONFIG_STK52XX)
+#if defined (CONFIG_STK52XX) || defined (CONFIG_TB5200)
} else if (line_number == 2) {
+#if defined (CONFIG_STK52XX)
strcpy (info, " on a STK52XX baseboard");
#endif
+#if defined (CONFIG_TB5200)
+ strcpy (info, " on a TB5200 baseboard");
+#endif
+#endif
}
else {
info [0] = '\0';
diff --git a/board/tqm85xx/tqm85xx.c b/board/tqm85xx/tqm85xx.c
index befe8b7..a87affc 100644
--- a/board/tqm85xx/tqm85xx.c
+++ b/board/tqm85xx/tqm85xx.c
@@ -423,4 +423,3 @@ int board_early_init_r (void)
return (0);
}
#endif /* CONFIG_BOARD_EARLY_INIT_R */
-
diff --git a/cpu/ppc4xx/serial.c b/cpu/ppc4xx/serial.c
index 3749811..4631519 100644
--- a/cpu/ppc4xx/serial.c
+++ b/cpu/ppc4xx/serial.c
@@ -635,7 +635,7 @@ void serial_setbrg (void)
tmp = gd->baudrate * udiv * 16;
bdiv = (clk + tmp / 2) / tmp;
-#endif /* !defined(CFG_EXT_SERIAL_CLOCK) && (...) */
+#endif /* !defined(CFG_EXT_SERIAL_CLOCK) && (...) */
#if defined(CONFIG_SERIAL_MULTI)
out8 (dev_base + UART_LCR, 0x80); /* set DLAB bit */
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index 0a6f81d..699fa7f 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -159,7 +159,7 @@ _start_440:
| Core bug fix. Clear the esr
+-----------------------------------------------------------------*/
li r0,0
- mtspr esr,r0
+ mtspr esr,r0
/*----------------------------------------------------------------*/
/* Clear and set up some registers. */
/*----------------------------------------------------------------*/
diff --git a/drivers/Makefile b/drivers/Makefile
index 8e79528..9be95c7 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -50,7 +50,7 @@ OBJS = 3c589.o 5701rls.o ali512x.o \
videomodes.o w83c553f.o \
ks8695eth.o \
pxa_pcmcia.o mpc8xx_pcmcia.o tqm8xx_pcmcia.o \
- rpx_pcmcia.o
+ rpx_pcmcia.o
all: $(LIB)
diff --git a/drivers/tqm8xx_pcmcia.c b/drivers/tqm8xx_pcmcia.c
index 8d4a85c..b5b9308 100644
--- a/drivers/tqm8xx_pcmcia.c
+++ b/drivers/tqm8xx_pcmcia.c
@@ -191,7 +191,7 @@ int pcmcia_hardware_enable(int slot)
udelay(10000);
debug ("[%d] %s: PIPR(%p)=0x%x\n", __LINE__,__FUNCTION__,
&(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
-
+
if (check_card_is_absent(slot)) {
printf (" No Card found\n");
return (1);
@@ -206,7 +206,7 @@ int pcmcia_hardware_enable(int slot)
reg,
(reg&PCMCIA_VS1(slot))?"n":"ff",
(reg&PCMCIA_VS2(slot))?"n":"ff");
-
+
if ((reg & mask) == mask) {
power_on_5_0(slot);
puts (" 5.0V card found: ");
@@ -228,7 +228,7 @@ int pcmcia_hardware_enable(int slot)
reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */
reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
reg &= ~NSCU_GCRX_CXOE;
-
+
PCMCIA_PGCRX(slot) = reg;
udelay(250000); /* some cards need >150 ms to come up :-( */
@@ -285,7 +285,7 @@ int pcmcia_voltage_set(int slot, int vcc, int vpp)
reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */
reg |= NSCU_GCRX_CXOE; /* active low */
-
+
PCMCIA_PGCRX(slot) = reg;
udelay(500);
diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h
new file mode 100644
index 0000000..d793847
--- /dev/null
+++ b/include/configs/TB5200.h
@@ -0,0 +1,470 @@
+/*
+ * (C) Copyright 2003-2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2004-2006
+ * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
+#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */
+#define CONFIG_TQM5200 1 /* ... on TQM5200 module */
+#define CONFIG_TB5200 1 /* ... on a TB5200 base board */
+
+#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
+
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_PSC_CONSOLE 1 /* default console is on PSC1 */
+#define CONFIG_SERIAL_MULTI 1 /* support multiple consoles */
+#define CONFIG_PSC_CONSOLE2 6 /* second console is on PSC6 */
+#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+
+/*
+ * Video console
+ */
+#if 1
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_SM501
+#define CONFIG_VIDEO_SM501_32BPP
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_CONSOLE_EXTRA_INFO
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_SPLASH_SCREEN
+#define CFG_CONSOLE_IS_IN_ENV
+#endif
+
+#ifdef CONFIG_VIDEO
+#define ADD_BMP_CMD CFG_CMD_BMP
+#else
+#define ADD_BMP_CMD 0
+#endif
+
+/* Partitions */
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+
+/* USB */
+#define CONFIG_USB_OHCI
+#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT
+#define CONFIG_USB_STORAGE
+
+/* POST support */
+#define CONFIG_POST (CFG_POST_MEMORY | \
+ CFG_POST_CPU | \
+ CFG_POST_I2C)
+
+#ifdef CONFIG_POST
+#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
+/* preserve space for the post_word at end of on-chip SRAM */
+#define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
+#else
+#define CFG_CMD_POST_DIAG 0
+#endif
+
+/* IDE */
+#define ADD_IDE_CMD (CFG_CMD_IDE | CFG_CMD_FAT | CFG_CMD_EXT2)
+
+/*
+ * Supported commands
+ */
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ ADD_BMP_CMD | \
+ ADD_IDE_CMD | \
+ ADD_PCI_CMD | \
+ ADD_USB_CMD | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_ECHO | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_I2C | \
+ CFG_CMD_JFFS2 | \
+ CFG_CMD_MII | \
+ CFG_CMD_NFS | \
+ CFG_CMD_PING | \
+ CFG_CMD_POST_DIAG | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SNTP | \
+ CFG_CMD_BSP)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_TIMESTAMP /* display image timestamps */
+
+#if (TEXT_BASE == 0xFC000000) /* Boot low */
+# define CFG_LOWBOOT 1
+#endif
+
+/*
+ * Autobooting
+ */
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "rootpath=/opt/eldk/ppc_6xx\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "flash_self=run ramargs addip;" \
+ "bootm ${kernel_addr} ${ramdisk_addr}\0" \
+ "flash_nfs=run nfsargs addip;" \
+ "bootm ${kernel_addr}\0" \
+ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
+ "bootfile=/tftpboot/tqm5200/uImage\0" \
+ "load=tftp 200000 $(u-boot)\0" \
+ "u-boot=/tftpboot/tqm5200/u-boot.bin\0" \
+ "update=protect off FC000000 FC05FFFF;" \
+ "erase FC000000 FC05FFFF;" \
+ "cp.b 200000 FC000000 ${filesize};" \
+ "protect on FC000000 FC05FFFF\0" \
+ ""
+
+#define CONFIG_BOOTCOMMAND "run net_nfs"
+
+/*
+ * IPB Bus clocking configuration.
+ */
+#define CFG_IPBSPEED_133 /* define for 133MHz speed */
+
+#if defined(CFG_IPBSPEED_133)
+/*
+ * PCI Bus clocking configuration
+ *
+ * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
+ * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't
+ * been tested with a IPB Bus Clock of 66 MHz.
+ */
+#define CFG_PCISPEED_66 /* define for 66MHz speed */
+#endif
+
+/*
+ * I2C configuration
+ */
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#define CFG_I2C_MODULE 2 /* Select I2C module #2 */
+
+/*
+ * I2C clock frequency
+ *
+ * Please notice, that the resulting clock frequency could differ from the
+ * configured value. This is because the I2C clock is derived from system
+ * clock over a frequency divider with only a few divider values. U-boot
+ * calculates the best approximation for CFG_I2C_SPEED. However the calculated
+ * approximation allways lies below the configured value, never above.
+ */
+#define CFG_I2C_SPEED 100000 /* 100 kHz */
+#define CFG_I2C_SLAVE 0x7F
+
+/*
+ * EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work
+ * also). For other EEPROMs configuration should be verified. On Mini-FAP the
+ * EEPROM (24C64) is on the same I2C address (but on other I2C bus), so the
+ * same configuration could be used.
+ */
+#define CFG_I2C_EEPROM_ADDR 0x50 /* 1010000x */
+#define CFG_I2C_EEPROM_ADDR_LEN 2
+#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20
+
+/* List of I2C addresses to be verified by POST */
+#undef I2C_ADDR_LIST
+#define I2C_ADDR_LIST { CFG_I2C_EEPROM_ADDR, \
+ CFG_I2C_RTC_ADDR, \
+ CFG_I2C_SLAVE }
+
+/*
+ * Flash configuration
+ */
+#define CFG_FLASH_BASE TEXT_BASE /* 0xFC000000 */
+
+/* use CFI flash driver if no module variant is spezified */
+#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
+#define CFG_FLASH_BANKS_LIST { CFG_BOOTCS_START }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_SIZE 0x04000000 /* 64 MByte */
+#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */
+#undef CFG_FLASH_USE_BUFFER_WRITE /* not supported yet for AMD */
+
+#if !defined(CFG_LOWBOOT)
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00760000 + 0x00800000)
+#else /* CFG_LOWBOOT */
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00060000)
+#endif /* CFG_LOWBOOT */
+#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks
+ (= chip selects) */
+#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
+
+/* Dynamic MTD partition support */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT "nor0=TQM5200-0"
+#define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:640k(firmware)," \
+ "1408k(kernel)," \
+ "2m(initrd)," \
+ "4m(small-fs)," \
+ "16m(big-fs)," \
+ "8m(misc)"
+
+/*
+ * Environment settings
+ */
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_SIZE 0x10000
+#define CFG_ENV_SECT_SIZE 0x20000
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+
+/*
+ * Memory map
+ */
+#define CFG_MBAR 0xF0000000
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_DEFAULT_MBAR 0x80000000
+
+/* Use ON-Chip SRAM until RAM will be available */
+#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM
+#ifdef CONFIG_POST
+/* preserve space for the post_word at end of on-chip SRAM */
+#define CFG_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE
+#else
+#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE
+#endif
+
+
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_BASE TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+# define CFG_RAMBOOT 1
+#endif
+
+#define CFG_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */
+#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc() */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_MPC5xxx_FEC 1
+/*
+ * Define CONFIG_FEC_10MBIT to force FEC at 10Mb
+ */
+/* #define CONFIG_FEC_10MBIT 1 */
+#define CONFIG_PHY_ADDR 0x00
+
+/*
+ * GPIO configuration
+ *
+ * use pin gpio_wkup_6 as second SDRAM chip select (mem_cs1):
+ * Bit 0 (mask: 0x80000000): 1
+ * use ALT CAN position: Bits 2-3 (mask: 0x30000000):
+ * 00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting.
+ * 01 -> CAN1 on I2C1, CAN2 on Tmr0/1.
+ * Use for REV200 STK52XX boards. Do not use with REV100 modules
+ * (because, there I2C1 is used as I2C bus)
+ * use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100
+ * use PSC2 as CAN: Bits 25:27 (mask: 0x00000030)
+ * 000 -> All PSC2 pins are GIOPs
+ * 001 -> CAN1/2 on PSC2 pins
+ * Use for REV100 STK52xx boards
+ * use PSC3: Bits 20:23 (mask: 0x00000300):
+ * 0001 -> USB2
+ * 0000 -> GPIO
+ * use PSC6:
+ * on STK52xx:
+ * use as UART. Pins PSC6_0 to PSC6_3 are used.
+ * Bits 9:11 (mask: 0x00700000):
+ * 101 -> PSC6 : Extended POST test is not available
+ * on MINI-FAP and TQM5200_IB:
+ * use PSC6_0 to PSC6_3 as GPIO: Bits 9:11 (mask: 0x00700000):
+ * 000 -> PSC6 could not be used as UART, CODEC or IrDA
+ * GPIO on PSC6_3 is used in post_hotkeys_pressed() to enable extended POST
+ * tests.
+ */
+#define CFG_GPS_PORT_CONFIG 0x81500114
+
+/*
+ * RTC configuration
+ */
+#define CONFIG_RTC_M41T11 1
+#define CFG_I2C_RTC_ADDR 0x68
+#define CFG_M41T11_BASE_YEAR 1900 /* because Linux uses the same base
+ year */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+/* Enable an alternate, more extensive memory test */
+#define CFG_ALT_MEMTEST
+
+#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
+#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+/*
+ * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
+ * which is normally part of the default commands (CFV_CMD_DFL)
+ */
+#define CONFIG_LOOPW
+
+/*
+ * Various low-level settings
+ */
+#if defined(CONFIG_MPC5200)
+#define CFG_HID0_INIT HID0_ICE | HID0_ICFI
+#define CFG_HID0_FINAL HID0_ICE
+#else
+#define CFG_HID0_INIT 0
+#define CFG_HID0_FINAL 0
+#endif
+
+#define CFG_BOOTCS_START CFG_FLASH_BASE
+#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
+#ifdef CFG_PCISPEED_66
+#define CFG_BOOTCS_CFG 0x0008DF30 /* for pci_clk = 66 MHz */
+#else
+#define CFG_BOOTCS_CFG 0x0004DF30 /* for pci_clk = 33 MHz */
+#endif
+#define CFG_CS0_START CFG_FLASH_BASE
+#define CFG_CS0_SIZE CFG_FLASH_SIZE
+
+/* automatic configuration of chip selects */
+#ifdef CONFIG_CS_AUTOCONF
+#define CONFIG_LAST_STAGE_INIT
+#endif
+
+/*
+ * SRAM - Do not map below 2 GB in address space, because this area is used
+ * for SDRAM autosizing.
+ */
+#if defined (CONFIG_CS_AUTOCONF)
+#define CFG_CS2_START 0xE5000000
+#define CFG_CS2_SIZE 0x100000 /* 1 MByte */
+#define CFG_CS2_CFG 0x0004D930
+#endif
+
+/*
+ * Grafic controller - Do not map below 2 GB in address space, because this
+ * area is used for SDRAM autosizing.
+ */
+#if defined (CONFIG_CS_AUTOCONF)
+#define SM501_FB_BASE 0xE0000000
+#define CFG_CS1_START (SM501_FB_BASE)
+#define CFG_CS1_SIZE 0x4000000 /* 64 MByte */
+#define CFG_CS1_CFG 0x8F48FF70
+#define SM501_MMIO_BASE CFG_CS1_START + 0x03E00000
+#endif
+
+#define CFG_CS_BURST 0x00000000
+#define CFG_CS_DEADCYCLE 0x33333311 /* 1 dead cycle for flash and SM501 */
+
+#define CFG_RESET_ADDRESS 0xff000000
+
+/*-----------------------------------------------------------------------
+ * USB stuff
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_USB_CLOCK 0x0001BBBB
+#define CONFIG_USB_CONFIG 0x00001000
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff Supports IDE harddisk
+ *-----------------------------------------------------------------------
+ */
+
+#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
+
+#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
+#undef CONFIG_IDE_LED /* LED for ide not supported */
+
+#define CONFIG_IDE_RESET /* reset for ide supported */
+#define CONFIG_IDE_PREINIT
+
+#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
+#define CFG_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */
+
+#define CFG_ATA_IDE0_OFFSET 0x0000
+
+#define CFG_ATA_BASE_ADDR MPC5XXX_ATA
+
+/* Offset for data I/O */
+#define CFG_ATA_DATA_OFFSET (0x0060)
+
+/* Offset for normal register accesses */
+#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET)
+
+/* Offset for alternate registers */
+#define CFG_ATA_ALT_OFFSET (0x005C)
+
+/* Interval between registers */
+#define CFG_ATA_STRIDE 4
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/gth2.h b/include/configs/gth2.h
index 77d2d56..a49ed3b 100644
--- a/include/configs/gth2.h
+++ b/include/configs/gth2.h
@@ -12,7 +12,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -34,7 +34,7 @@
#define CONFIG_AU1000 1
-#define CONFIG_MISC_INIT_R 1
+#define CONFIG_MISC_INIT_R 1
#define CONFIG_ETHADDR DE:AD:BE:EF:01:02 /* Ethernet address */
@@ -59,21 +59,21 @@
#define CONFIG_AUTOBOOT_DELAY_STR "d"
#define CONFIG_AUTOBOOT_STOP_STR " "
-#define CONFIG_TIMESTAMP /* Print image info with timestamp */
-#define CONFIG_BOOTARGS "panic=1"
+#define CONFIG_TIMESTAMP /* Print image info with timestamp */
+#define CONFIG_BOOTARGS "panic=1"
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CONFIG_EXTRA_ENV_SETTINGS \
"addmisc=setenv bootargs $(bootargs) " \
- "ethaddr=$(ethaddr) \0" \
- "netboot=bootp;run addmisc;bootm\0" \
- ""
+ "ethaddr=$(ethaddr) \0" \
+ "netboot=bootp;run addmisc;bootm\0" \
+ ""
/* Boot from Compact flash partition 2 as default */
#define CONFIG_BOOTCOMMAND "ide reset;disk 0x81000000 0:2;run addmisc;bootm"
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_IDE | CFG_CMD_DHCP ) & \
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_IDE | CFG_CMD_DHCP ) & \
~(CFG_CMD_ENV | CFG_CMD_FAT | CFG_CMD_FLASH | CFG_CMD_FPGA | \
- CFG_CMD_MII | CFG_CMD_LOADS | CFG_CMD_LOADB | CFG_CMD_ELF | \
+ CFG_CMD_MII | CFG_CMD_LOADS | CFG_CMD_LOADB | CFG_CMD_ELF | \
CFG_CMD_BDI | CFG_CMD_BEDBUG | CFG_CMD_NFS | CFG_CMD_AUTOSCRIPT ))
#include <cmd_confdefs.h>
@@ -81,11 +81,11 @@
/*
* Miscellaneous configurable options
*/
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "GTH2 # " /* Monitor Command Prompt */
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args*/
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "GTH2 # " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args*/
#define CFG_MALLOC_LEN 128*1024
@@ -93,16 +93,16 @@
#define CFG_MHZ 500
-#define CFG_HZ (CFG_MHZ * 1000000) /* FIXME causes overflow in net.c */
+#define CFG_HZ (CFG_MHZ * 1000000) /* FIXME causes overflow in net.c */
#define CFG_SDRAM_BASE 0x80000000 /* Cached addr */
-#define CFG_LOAD_ADDR 0x81000000 /* default load address */
+#define CFG_LOAD_ADDR 0x81000000 /* default load address */
#define CFG_MEMTEST_START 0x80100000
#define CFG_MEMTEST_END 0x83000000
-#define CONFIG_HW_WATCHDOG 1
+#define CONFIG_HW_WATCHDOG 1
/*-----------------------------------------------------------------------
* FLASH and environment organization
@@ -113,8 +113,8 @@
#define PHYS_FLASH 0xbfc00000 /* Flash Bank #1 */
/* The following #defines are needed to get flash environment right */
-#define CFG_MONITOR_BASE TEXT_BASE
-#define CFG_MONITOR_LEN (192 << 10)
+#define CFG_MONITOR_BASE TEXT_BASE
+#define CFG_MONITOR_LEN (192 << 10)
#define CFG_INIT_SP_OFFSET 0x400000
@@ -125,7 +125,7 @@
#define CFG_FLASH_ERASE_TOUT (2 * CFG_HZ) /* Timeout for Flash Erase */
#define CFG_FLASH_WRITE_TOUT (2 * CFG_HZ) /* Timeout for Flash Write */
-#define CFG_ENV_IS_NOWHERE 1
+#define CFG_ENV_IS_NOWHERE 1
/* Address and size of Primary Environment Sector */
#define CFG_ENV_ADDR 0xB0030000
@@ -158,21 +158,21 @@
#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
-#undef CONFIG_IDE_LED /* LED for ide not supported */
+#undef CONFIG_IDE_LED /* LED for ide not supported */
#undef CONFIG_IDE_RESET /* reset for ide not supported */
#define CFG_ATA_IDE0_OFFSET 0
-#define CFG_ATA_BASE_ADDR CFG_PCMCIA_IO_BASE
+#define CFG_ATA_BASE_ADDR CFG_PCMCIA_IO_BASE
/* Offset for data I/O */
-#define CFG_ATA_DATA_OFFSET 0
+#define CFG_ATA_DATA_OFFSET 0
-/* Offset for normal register accesses */
-#define CFG_ATA_REG_OFFSET 0
+/* Offset for normal register accesses */
+#define CFG_ATA_REG_OFFSET 0
-/* Offset for alternate registers */
-#define CFG_ATA_ALT_OFFSET 0x0200
+/* Offset for alternate registers */
+#define CFG_ATA_ALT_OFFSET 0x0200
/*-----------------------------------------------------------------------
* Cache Configuration
diff --git a/include/configs/ppmc7xx.h b/include/configs/ppmc7xx.h
index ea15524..072b9dd 100644
--- a/include/configs/ppmc7xx.h
+++ b/include/configs/ppmc7xx.h
@@ -1,9 +1,9 @@
/*
* ppmc7xx.h
* ---------
- *
+ *
* Wind River PPMC 7xx/74xx board configuration file.
- *
+ *
* By Richard Danter (richard.danter@windriver.com)
* Copyright (C) 2005 Wind River Systems
*/
@@ -16,15 +16,15 @@
/*===================================================================
- *
+ *
* User configurable settings - Modify to your preference
- *
+ *
*===================================================================
*/
/*
* Debug
- *
+ *
* DEBUG - Define this is you want extra debug info
* GTREGREAD - Required to build with debug
* do_bdinfo - Required to build with debug
@@ -37,7 +37,7 @@
/*
* CPU type
- *
+ *
* CONFIG_7xx - We have a 750 or 755 CPU
* CONFIG_74xx - We have a 7400 CPU
* CONFIG_ALTIVEC - We have altivec enabled CPU (only 7400)
@@ -52,11 +52,11 @@
/*
* Monitor configuration
- *
+ *
* CONFIG_COMMANDS - List of command sets to include in shell
- *
+ *
* The following command sets have been tested and known to work:
- *
+ *
* CFG_CMD_CACHE - Cache control commands
* CFG_CMD_MEMORY - Memory display, change and test commands
* CFG_CMD_FLASH - Erase and program flash
@@ -91,7 +91,7 @@
/*
* PCI config
- *
+ *
* CONFIG_PCI - Enable PCI bus
* CONFIG_PCI_PNP - Enable Plug & Play support
* CONFIG_PCI_SCAN_SHOW - Enable display of devices at startup
@@ -104,7 +104,7 @@
/*
* Network config
- *
+ *
* CONFIG_NET_MULTI - Support for multiple network interfaces
* CONFIG_EEPRO100 - Intel 8255x Ethernet Controller
* CONFIG_EEPRO100_SROM_WRITE - Enable writing to network card ROM
@@ -117,18 +117,18 @@
/*
* Enable extra init functions
- *
+ *
* CONFIG_MISC_INIT_F - Call pre-relocation init functions
* CONFIG_MISC_INIT_R - Call post relocation init functions
*/
#undef CONFIG_MISC_INIT_F
-#define CONFIG_MISC_INIT_R
+#define CONFIG_MISC_INIT_R
/*
* Boot config
- *
+ *
* CONFIG_BOOTCOMMAND - Command(s) to execute to auto-boot
* CONFIG_BOOTDELAY - How long to wait before auto-boot (in sec)
*/
@@ -142,9 +142,9 @@
/*===================================================================
- *
+ *
* Board configuration settings - You should not need to modify these
- *
+ *
*===================================================================
*/
@@ -154,9 +154,9 @@
/*
* Memory map
- *
+ *
* This board runs in a standard CHRP (Map-B) configuration.
- *
+ *
* Type Start End Size Width Chip Sel
* ----------- ----------- ----------- ------- ------- --------
* SDRAM 0x00000000 0x04000000 64MB 64b SDRAMCS0
@@ -164,9 +164,9 @@
* UART 0x7C000000 RCS2
* Mailbox 0xFF000000 RCS1
* Flash 0xFFC00000 0xFFFFFFFF 4MB 64b RCS0
- *
+ *
* Flash sectors are laid out as follows.
- *
+ *
* Sector Start End Size Comments
* ------- ----------- ----------- ------- -----------
* 0 0xFFC00000 0xFFC3FFFF 256KB
@@ -193,7 +193,7 @@
/*
* SDRAM config - see memory map details above.
- *
+ *
* CFG_SDRAM_BASE - Start address of SDRAM, this _must_ be zero!
* CFG_SDRAM_SIZE - Total size of contiguous SDRAM bank(s)
*/
@@ -202,9 +202,9 @@
#define CFG_SDRAM_SIZE 0x04000000
-/*
+/*
* Flash config - see memory map details above.
- *
+ *
* CFG_FLASH_BASE - Start address of flash memory
* CFG_FLASH_SIZE - Total size of contiguous flash mem
* CFG_FLASH_ERASE_TOUT - Erase timeout in ms
@@ -223,7 +223,7 @@
/*
* Monitor config - see memory map details above
- *
+ *
* CFG_MONITOR_BASE - Base address of monitor code
* CFG_MALLOC_LEN - Size of malloc pool (128KB)
*/
@@ -234,7 +234,7 @@
/*
* Command shell settings
- *
+ *
* CFG_BARGSIZE - Boot Argument buffer size
* CFG_BOOTMAPSZ - Size of app's mapped RAM at boot (Linux=8MB)
* CFG_CBSIZE - Console Buffer (input) size
@@ -261,10 +261,10 @@
/*
* Environment config - see memory map details above
- *
+ *
* CFG_ENV_IS_IN_FLASH - The env variables are stored in flash
* CFG_ENV_ADDR - Address of the sector containing env vars
- * CFG_ENV_SIZE - Ammount of RAM for env vars (used to save RAM, 4KB)
+ * CFG_ENV_SIZE - Ammount of RAM for env vars (used to save RAM, 4KB)
* CFG_ENV_SECT_SIZE - Size of sector containing env vars (32KB)
*/
@@ -282,7 +282,7 @@
* Since the main system RAM is initialised very early, we place the INIT_RAM
* in the main system RAM just above the exception vectors. The contents are
* copied to top of RAM by the init code.
- *
+ *
* CFG_INIT_RAM_ADDR - Address of Init RAM, above exception vect
* CFG_INIT_RAM_END - Size of Init RAM
* CFG_GBL_DATA_SIZE - Ammount of RAM to reserve for global data
@@ -297,7 +297,7 @@
/*
* Initial BAT config
- *
+ *
* BAT0 - System SDRAM
* BAT1 - LED's and Serial Port
* BAT2 - PCI Memory
@@ -327,7 +327,7 @@
/*
* Cache config
- *
+ *
* CFG_CACHELINE_SIZE - Size of a cache line (CPU specific)
* CFG_L2 - L2 cache enabled if defined
* L2_INIT - L2 cache init flags
@@ -342,7 +342,7 @@
/*
* Clocks config
- *
+ *
* CFG_BUS_HZ - Bus clock frequency in Hz
* CFG_BUS_CLK - As above (?)
* CFG_HZ - Decrementer freq in Hz
@@ -355,7 +355,7 @@
/*
* Serial port config
- *
+ *
* CFG_BAUDRATE_TABLE - List of valid baud rates
* CFG_NS16550 - Include the NS16550 driver
* CFG_NS16550_SERIAL - Include the serial (wrapper) driver
@@ -398,7 +398,7 @@
/*
* Extra init functions
- *
+ *
* CFG_BOARD_ASM_INIT - Call assembly init code
*/
@@ -407,11 +407,11 @@
/*
* Boot flags
- *
+ *
* BOOTFLAG_COLD - Indicates a power-on boot
* BOOTFLAG_WARM - Indicates a software reset
*/
-
+
#define BOOTFLAG_COLD 0x01
#define BOOTFLAG_WARM 0x02
diff --git a/include/ns16550.h b/include/ns16550.h
index 996d915..34888a1 100644
--- a/include/ns16550.h
+++ b/include/ns16550.h
@@ -7,7 +7,7 @@
* added prototypes for ns16550.c
* reduced no of com ports to 2
* modifications (c) Rob Taylor, Flying Pig Systems. 2000.
- *
+ *
* added support for port on 64-bit bus
* by Richard Danter (richard.danter@windriver.com), (C) 2005 Wind River Systems
*/