summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
...
* | gpio: add gpio api support to mx27 (v4)trem2012-09-01-31/+73
| | | | | | | | | | | | | | The gpio api has been tested on an armadeus apf27. Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr> Acked-by: Stefano Babic <sbabic@denx.de>
* | mx5: add iomux-mx51.h includeMatt Sealey2012-09-01-0/+164
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow usage of the imx-common/iomux-v3.h framework by including pad settings for the i.MX51. The content of the file is taken from Linux kernel at commit 5d23b39 plus the required changes to make it work in U-Boot. The contained pad settings are the minimum required to make an Efika MX boot and get all the currently-implemented peripherals working in U-Boot. It is recommended that this file not be just a dumping ground for pins but only contain the settings required for all the boards using it. Changes for v2: * reference commit id from Linux kernel * additionally roll in the USB pads * removed GPIO_NUMBER define Signed-off-by: Matt Sealey <matt@genesi-usa.com> Acked-by: Stefano Babic <sbabic@denx.de>
* | mxs: Rename 'mx28_dram_init' to 'mxs_dram_init'Otavio Salvador2012-09-01-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DRAM initialization, after SPL has complete, is exactly the same for all mxs SoCs so we should name it accordinly. The following boards has been changed: * apx4devkit * m28evk * mx28evk * sc_sps_1 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com>
* | mxs: Only build internal Ethernet controller for i.MX28Otavio Salvador2012-09-01-1/+1
| | | | | | | | | | | | | | | | | | The internal Ethernet controller is only available on i.MX28 processors so it needs to use CONFIG_MX28 guardian to avoid having this code called in others. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Marek Vasut <marex@denx.de>
* | mxs: Replace i.MX233 by i.MX23 on copyright headerOtavio Salvador2012-09-01-1/+1
| | | | | | | | | | | | | | All other header are going to use i.MX23 so we change this for consistency. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* | mxc: Make gpio_get_value() use PSRBenoît Thébaudeau2012-09-01-1/+1
| | | | | | | | | | | | | | | | | | | | | | gpio_get_value() should use PSR like Linux, not DR, because DR does not always reflect the pin state, while PSR does. This is especially useful to detect a short circuit on a GPIO pin configured as output, or to read the level of a pin controlled by a non-GPIO IOMUX function. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* | mx53ard: Use IMX_GPIO_NR macroFabio Estevam2012-09-01-1/+1
| | | | | | | | Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* | mx51evk: Use IMX_GPIO_NR macroFabio Estevam2012-09-01-3/+3
| | | | | | | | Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* | mx53loco: Use IMX_GPIO_NR macroFabio Estevam2012-09-01-1/+1
| | | | | | | | Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* | mx35: Remove declaration of non-existing functionBenoît Thébaudeau2012-09-01-2/+0
| | | | | | | | | | | | Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* | mx35: Move clock enums to clock.hBenoît Thébaudeau2012-09-01-29/+29
| | | | | | | | | | | | Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* | mx35: Remove declaration of non-existing functionBenoît Thébaudeau2012-09-01-1/+0
| | | | | | | | | | | | Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* | mx35: Fix broken pin definitionsBenoît Thébaudeau2012-09-01-5/+2
| | | | | | | | | | | | Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* | mx35 iomux: Remove unused macroBenoît Thébaudeau2012-09-01-2/+0
| | | | | | | | | | | | Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* | mx5: Undeclare imx_decode_pll()Benoît Thébaudeau2012-09-01-2/+0
| | | | | | | | | | | | | | The imx_decode_pll() function does not exist for mx5, so remove its declaration. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de>
* | MX: Set a common gpio.h for all i.MXStefano Babic2012-09-01-80/+78
| | | | | | | | | | | | | | | | | | Each i.MX has its own gpio.h, defining the same structure. The internal GPIO controller has the same layout (at least for the register used by u-boot) and can be shared. Signed-off-by: Stefano Babic <sbabic@denx.de> Tested-by: Matt Sealey <matt@genesi-usa.com>
* | mxs: Use correct function name to initialize dramFabio Estevam2012-09-01-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | commit d92591a (mxs: Convert sys_proto.h prefixes to 'mxs') introduced a mxs_dram_init() function, which is not used anywhere. Fix it, so that the following warning goes away: mx28evk.c: In function ‘dram_init’: mx28evk.c:67:2: warning: implicit declaration of function ‘mx28_dram_init’ [-Wimplicit-function-declaration] Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
* | mx28evk: Remove unneeded 'undef'Fabio Estevam2012-09-01-1/+0
| | | | | | | | | | | | | | | | There is no need to undef an option that is not enabled by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* | MX28: Move "regs-base.h" include after SoC type configurationOtavio Salvador2012-09-01-8/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For i.MX233 addition the base registers need to be change so the SoC definition needs to be known before the header include. The following boards has been changed: * apx4devkit * m28evk * mx28evk * sc_sps_1 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Stefano Babic <sbabic@denx.de>
* | MX28: config: Allow different target generation in elftosb callOtavio Salvador2012-09-01-1/+4
| | | | | | | | | | | | | | | | The elftosb call needs to use a target param specific for i.MX28. This patch allow for later addition of i.MX233. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Marek Vasut <marex@denx.de>
* | mx35: Add cpu_mmc_init()Benoît Thébaudeau2012-09-01-1/+14
| | | | | | | | | | | | | | | | Add cpu_mmc_init() function to make it easy to init a single eSDHC instance. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* | mx5/6: Fix cpu_mmc_init() return valueBenoît Thébaudeau2012-09-01-4/+2
| | | | | | | | | | | | | | | | | | Do not pretend to have initialized mmc successfully if CONFIG_FSL_ESDHC is not defined. Instead, only implement a custom cpu_mmc_init() when it does something. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* | spi: fix mxs_spi_slave structure allocation to clear memoryMatt Sealey2012-09-01-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use calloc() instead of malloc() to allocate the mxs_spi_slave structure. Clearing the memory is necessary since most of the time this gets done super early in boot, but on warm reboots, and when SPI probing is done long after the init stages it could actually pick up previously used memory, and things like the chipselect polarity and other data end up being filled with trash data if not explicitly set by the board files. This solves a semi-random, almost unreproducable error whereby SPI devices act very, very strangly on boot. Signed-off-by: Matt Sealey <matt@genesi-usa.com> Acked-by: Stefano Babic <sbabic@denx.de>
* | spi: fix mxc_spi_slave structure allocation to clear memoryMatt Sealey2012-09-01-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use calloc() instead of malloc() to allocate the mxc_spi_slave structure. Clearing the memory is necessary since most of the time this gets done super early in boot, but on warm reboots, and when SPI probing is done long after the init stages it could actually pick up previously used memory, and things like the chipselect polarity and other data end up being filled with trash data if not explicitly set by the board files. This solves a semi-random, almost unreproducable error whereby SPI devices act very, very strangly on boot. Tested on Efika MX over several years.. Signed-off-by: Matt Sealey <matt@genesi-usa.com> Acked-by: Stefano Babic <sbabic@denx.de>
* | mx53evk: add boot_mode supportTroy Kisky2012-09-01-0/+16
| | | | | | | | | | | | | | This allows a watchdog reset to start the ROM's usb/serial downloader, or boot from an sdcard. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
* | mx6qsabrelite: add boot_mode supportTroy Kisky2012-09-01-0/+17
| | | | | | | | | | | | | | This allows a watchdog reset to start the ROM's usb downloader, or boot from an sdcard. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
* | imx-common/cmd_bmode.c: add imx bmode (bootmode) commandTroy Kisky2012-09-01-0/+262
| | | | | | | | | | | | | | | | | | | | | | | | This is useful for forcing the ROM's usb downloader to activate upon a watchdog reset. Or, you can boot from either SD Card. Currently, support added for MX53 and MX6Q Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Note: MX53 support untested. Acked-by: Stefano Babic <sbabic@denx.de>
* | iomux: move IOMUX_GPR13_xxx definesTroy Kisky2012-09-01-111/+130
| | | | | | | | | | | | | | Move mx6 specific defines to arch-mx6 directory. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Stefano Babic <sbabic@denx.de>
* | mx35: Remove duplicate GPIO3_BASE_ADDRBenoît Thébaudeau2012-09-01-1/+0
| | | | | | | | | | | | Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* | mx5: cosmetic: Clean up lowlevel_initBenoît Thébaudeau2012-09-01-23/+23
| | | | | | | | | | | | | | | | | | | | Coding style cleanup: - Remove useless parentheses. - Use tabs for indentations and alignments. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* | mx5/6 timer: Round up tick_to_time() valueBenoît Thébaudeau2012-09-01-1/+1
| | | | | | | | | | | | | | | | | | | | Round up tick_to_time() value instead of truncating it. This avoids stopping waits instantly for low usec values, and this generally guarantees that the code always waits for at least the requested duration. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* | mx3: Fix typo on IPU_CONF_CSI_ENBenoît Thébaudeau2012-09-01-2/+2
| | | | | | | | | | | | Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* | mx35: Fix typo on EDIOBenoît Thébaudeau2012-09-01-4/+4
| | | | | | | | | | | | Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* | mx5: Enable dcacheBenoît Thébaudeau2012-09-01-0/+8
| | | | | | | | | | | | | | | | | | Now that the main i.MX features work fine with dcache enabled, enabled it by default if CONFIG_SYS_DCACHE_OFF is not defined. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* | mx25: Enable dcacheBenoît Thébaudeau2012-09-01-0/+8
| | | | | | | | | | | | | | | | | | Now that the main i.MX features work fine with dcache enabled, enabled it by default if CONFIG_SYS_DCACHE_OFF is not defined. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* | mxc_spi: Round up clock dividerBenoît Thébaudeau2012-09-01-2/+2
| | | | | | | | | | | | | | | | | | | | | | Since the input frequency of the API is a maximum that should not be exceeded in order for the devices to operate properly, the SPI clock divider should be rounded up, not truncated. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* | rtc: add support of mx27 rtctrem2012-09-01-0/+127
| | | | | | | | | | | | | | This driver has been tested on board armadeus apf27. Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr> Acked-by: Stefano Babic <sbabic@denx.de>
* | MX28: Shuffle around the power management codeMarek Vasut2012-09-01-6/+3
| | | | | | | | | | | | | | | | | | | | Move some function calls to a more appropriate place, so they're called only when needed. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
* | MX28: Drop the cp15 reconfiguration from SPLMarek Vasut2012-09-01-42/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SPL doesn't need the CP15 reconfiguration, as that's what the BootROM does for us already. Moreover, when the CP15 is reconfigured and the code returns control to BootROM, the USB boot works no more. Remove the code and allow [1] to work properly as well. [1] http://git.bfuser.eu/?p=marex/mxsldr.git;a=summary Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
* | tx25: Use generic gpio_* callsVikram Narayanan2012-09-01-16/+9
| | | | | | | | | | | | | | | | | | | | | | | | Instead of manipulating gpio registers directly, use the calls from the gpio library. Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Acked-by: Stefano Babic <sbabic@denx.de> Cc: John Rigby <jcrigby@gmail.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
* | mxs: Convert sys_proto.h prefixes to 'mxs'Otavio Salvador2012-09-01-44/+44
| | | | | | | | | | | | | | The sys_proto.h functions (except the boot modes) are compatible with i.MX233 and i.MX28 so we use 'mxs' prefix for its methods. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* | mxs: rename regs-clkctrl.h to regs-clkctrl-mx28.hOtavio Salvador2012-09-01-2/+2
| | | | | | | | | | | | | | The CLKCTRL registers are SoC specific so we ought to have it clear on filename. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* | mxs: Remove not required include of iomux-mx28.hOtavio Salvador2012-09-01-1/+0
| | | | | | | | | | | | | | The iomux-mx28.h include is not required on spl_mem_init.c so it has been droped. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* | mxs: Remove not required explicit iomux-mx28.h includeOtavio Salvador2012-09-01-1/+0
| | | | | | | | | | | | | | | | The iomux header is included on sys_proto.h so to avoid SoC specific header inclusion. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Marek Vasut <marex@denx.de>
* | apx4devkit: Turn on cachesFabio Estevam2012-09-01-2/+0
| | | | | | | | | | | | | | | | | | Turn on data and instruction caches. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> include/configs/apx4devkit.h | 2 -- 1 files changed, 0 insertions(+), 2 deletions(-) Acked-by: Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com>
* | m28evk: Turn on cachesFabio Estevam2012-09-01-2/+0
| | | | | | | | | | | | Turn on data and instruction caches. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* | arm:cache:trats: Enable PL310 L2 Cache Controller at TRATS Samsung boardŁukasz Majewski2012-09-01-2/+4
| | | | | | | | | | | | | | | | Enable the PL310 L2 cache controller at TRATS Samsung board. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | arm:exynos: Enable data cache at exynos based processors.Łukasz Majewski2012-09-01-0/+8
| | | | | | | | | | | | | | | | | | This patch enables the L1 data cache for systems based on Samsung Exynos processor. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | video: support exynos pwm backlight driverDonghwa Lee2012-09-01-0/+92
| | | | | | | | | | | | | | | | | | This patch support exynos pwm backlight driver. It can control backlight power and brightness by using pwm. Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | video: exynos fb driver supports display port featureDonghwa Lee2012-09-01-1/+21
| | | | | | | | | | | | | | | | | | | | | | | | If dp_enabled was set, exynos fb driver support display port feature. This patch depends on [PATCH] video: support exynos fimd driver for various exynos series. http://marc.info/?l=u-boot&m=134119605104467&w=2 Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
generated by cgit v1.1 at 2024-11-02 05:34:21 +0000