summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
...
* | Merge branch 'master' of git://git.denx.de/u-boot-i2cTom Rini2017-01-18-63/+149
|\ \
| * | i2c: i2c-cdns: No need for dedicated probe functionMoritz Fischer2017-01-18-21/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | The generic probe code in dm works, so get rid of the leftover cruft. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Cc: Heiko Schocher <hs@denx.de> Cc: Michal Simek <michal.simek@xilinx.com> Cc: u-boot@lists.denx.de
| * | i2c: i2c-cdns: Implement workaround for hold quirk of the rev 1.0Moritz Fischer2017-01-18-30/+89
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Revision 1.0 of this IP has a quirk where if during a long read transfer the transfer_size register will go to 0, the master will send a NACK to the slave prematurely. The way to work around this is to reprogram the transfer_size register mid-transfer when the only the receive fifo is known full, i.e. the I2C bus is known non-active. The workaround is based on the implementation in the linux-kernel. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Cc: Heiko Schocher <hs@denx.de> Cc: Michal Simek <michal.simek@xilinx.com> Cc: u-boot@lists.denx.de
| * | i2c: i2c-cdns: Reorder timeout loop for interrupt waitingMoritz Fischer2017-01-18-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reorder the timeout loop such that we first check if the condition is already true, and then call udelay() so if the condition is already true, break early. Reviewed-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Cc: Heiko Schocher <hs@denx.de> Cc: Michal Simek <michal.simek@xilinx.com> Cc: u-boot@lists.denx.de
| * | i2c: i2c-cdns: Detect unsupported sequences for rev 1.0Moritz Fischer2017-01-18-14/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Revision 1.0 of this IP has a couple of issues, such as not supporting repeated start conditions for read transfers. So scan through the list of i2c messages for these conditions and report an error if they are attempted. This has been fixed for revision 1.4 of the IP, so only report the error when the IP can really not do it. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Cc: Heiko Schocher <hs@denx.de> Cc: Michal Simek <michal.simek@xilinx.com> Cc: u-boot@lists.denx.de
| * | i2c: mux: Allow muxes to work as children of i2c bus without i2c-parentMoritz Fischer2017-01-18-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For mux check if the parent is already a device of UCLASS_I2C and if yes just use that. Otherwise see if someone specified an i2c-parent phandle. This mimics the behavior found in the Kernel, as it removes the requirement to explicitly specify a i2c-parent phandle. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Cc: Heiko Schocher <hs@denx.de> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Michal Simek <michal.simek@xilinx.com> Cc: u-boot@lists.denx.de
* | | Merge git://git.denx.de/u-boot-samsungTom Rini2017-01-18-134/+338
|\ \ \ | |/ / |/| |
| * | exynos: video: Enable stdout env var backward compatibility for LCDJavier Martinez Canillas2017-01-18-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit bb5930d5c97f ("exynos: video: Convert several boards to driver model for video") converted the Exynos Chromebooks machines to use DM for video, but this breaks backward compatibility with the stdout env var since now stdout is expected to be "vidconsole" instead of "lcd". This causes display to not work when updating u-boot on these boards if the old stdout env var is used. Since these are consumer devices, there's no easy way to have a serial console so users may be confused thinking that u-boot failed to boot, or in the best case will need to update the stdout env var blindly to make the display to work again. There's a CONFIG_VIDCONSOLE_AS_LCD config option to workaround this, so enable it in the Chromebooks' default configuration files to allow users to change their stdout env var before the workaround is removed. Suggested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | exynos: Enable XHCI on exynos5250 boardsSjoerd Simons2017-01-18-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Once upon a time u-boot didn't support building with two usb host controller types, these days it does. Enable XHCI in addition to the existing EHCI support so user can plug usb devices in all available ports regardless of the controller type. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | exynos5: Don't potentially undervoltage the CPUSjoerd Simons2017-01-18-7/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For snow when chainloading u-boot the CPU seems to be running at full speed. The lower CPU voltage seems to be ok for u-boot, but when booting linux (bringing up all cores) I'm seeing random crashes. Bump the voltage up to a level that's safe for all cpu frequencies. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | board: samsung: universal_c210: remove the codes relevant to soft_i2cJaehoon Chung2017-01-18-11/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Removes the codes of soft_i2c. There is no usasge for universal_c210, also didn't define CONFIG_SOFT_I2C_GPIO_SCL. This code seems a dead code. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | i2c: Kconfig: Add SYS_I2C_S3C24X0 entryJaehoon Chung2017-01-18-0/+5
| | | | | | | | | | | | | | | | | | | | | Adding Kconfig for SYS_I2C_S3C24X0. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | i2c: s3c24x0: fix the compiler error for exynos4Jaehoon Chung2017-01-18-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | If CONFIG_SYS_I2C_S3C24X0_SLAVE isn't defined, then complie error should be occurred. This patch is for preventing it. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | board: samsung: universal_210: use the driver model for max8998Jaehoon Chung2017-01-18-75/+94
| | | | | | | | | | | | | | | | | | | | | | | | Revmoe the "ifndef CONFIG_DM_I2C". Intead, use the driver model for max8998. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | configs: s5pc210_universal: enable the DM_PMIC and MAX8998Jaehoon Chung2017-01-18-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Enable the CONFIG_DM_PMIC and CONFIG_DM_PMIC_MAX8998. s5pc210_universal board is using max8998 pmic. To use the i2c/pmic driver model, enable these configurations. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | ARM: dts: exnyos4210-universl_c210: add i2c_5 and pmic nodesJaehoon Chung2017-01-18-0/+164
| | | | | | | | | | | | | | | | | | | | | | | | Add the i2c_5 node and pmic as its child node. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | ARM: dts: exynos4: use the node's name for i2cJaehoon Chung2017-01-18-8/+19
| | | | | | | | | | | | | | | | | | | | | Use the node's name for i2c. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | board: samsung: goni: fix the pmic's name for gettingJaehoon Chung2017-01-18-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For Getting from uclass, use the "max8998-pmic" as name. It also needs to change the dt-node's name as "max8998-pmic". Otherwise, it doesn't find the pmic device. Because it's only searching for 'max8998_pmic'. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | arm: samsung: goni: use the driver model for max8998Jaehoon Chung2017-01-05-31/+30
| | | | | | | | | | | | | | | | | | | | | | | | Remove the "ifndef CONFIG_DM_I2C". Instead, use the driver model for max8998. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-uniphierTom Rini2017-01-17-1056/+739
|\ \ \ | | | | | | | | | | | | | | | | | | | | - Enable eMMC driver for LD11/LD20 SoCs - Refactoring of SoC init code - Bug fix of pinctrl driver
| * | | pinctrl: uniphier: fix Ethernet (RMII) pin-mux setting for LD20Masahiro Yamada2017-01-18-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the pin-mux values for the MDC, MDIO, MDIO_INTL, PHYRSTL pins. Fixes: fc9da85c6059 ("pinctrl: uniphier: add Ethernet pin-mux settings") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | ARM: uniphier: move SBC and Support Card init code to U-Boot properMasahiro Yamada2017-01-18-27/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Initialize SBC and Support Card in U-Boot proper instead of SPL. We may run different firmware (ex. ARM Trusted Firmware) before U-Boot, and basic SoC initialization may be done there. In that case, SPL may not be used. The motivation for preparing SBC and Support Card in SPL was to use LED for early debugging, but this is not mandatory to boot SoCs. With this commit, LED will be unavailable in SPL, but we can use a debug serial instead. So, this change will not be a big deal. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | ARM: uniphier: refactor spl_init_board()Masahiro Yamada2017-01-18-508/+250
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge init-*.c into a single file using a table of callbacks because the initialization flow is almost common among SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | ARM: uniphier: refactor board_init()Masahiro Yamada2017-01-18-95/+141
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The code here is cluttered due to the switch statement. Introduce a table of callbacks to clean up the initialization code across SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | ARM: uniphier: make BCU init into void functionMasahiro Yamada2017-01-17-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | These functions never fail, so no need to return a value. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | ARM: uniphier: refactor Support Card init codeMasahiro Yamada2017-01-17-28/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Splitting reset assertion (support_card_reset) and deassertion (support_card_init) is not adding much value any more. Handle all the initialization of Support Card in support_card_init(), then remove support_card_reset(). Also, detect_num_flash_banks() can have a static qualifier. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | ARM: uniphier: refactor SBC init codeMasahiro Yamada2017-01-17-110/+94
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge sbc-admulti.c and sbc-savepin.c into a single file to avoid code duplication. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | ARM: uniphier: refactor MEMCONF init codeMasahiro Yamada2017-01-17-259/+176
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, memconf-sld3.c and memconf-pxs2.c duplicate the code. There are 3 patterns in terms of MEMCONF init: - DRAM 2 channels: LD4, sLD8, Pro4, Pro5, LD11 - DRAM 3 channels: sLD3 - DRAM 3 channels (Ch2 is disable by MEMCONF[21]): Pxs2, LD20 All of them can be moved into a single file by a little more refactoring. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | ARM: uniphier: split out UMC clock enableMasahiro Yamada2017-01-17-69/+97
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The clock enable bits for UMC are more SoC-specific than for the other hardware blocks. Separate the UMC clocks and the other clocks for better code reuse across SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | ARM: uniphier: remove unneeded argument of uniphier_ld20_pll_init()Masahiro Yamada2017-01-17-11/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | At first, we thought the LD20 PLL setting would be board dependent, but this argument turned out unneeded after all. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | ARM: dts: uniphier: add UniPhier specific compatible to eMMC nodeMasahiro Yamada2017-01-17-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The "cdns,sd4hc" is a fallback of the IP. Add the SoC-specific compatible string. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | ARM: uniphier: enable Cadence eMMC controller for LD11/LD20Masahiro Yamada2017-01-17-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable SDMA (Single Operation DMA) for LD11, but not for LD20. The SDMA does not work for LD20 boards because they are generally equipped with more memory than fits in the 32 bit physical address space supported by the SDMA. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | | | Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2017-01-17-12/+138
|\ \ \ \
| * | | | drivers: usb: gadget: ether: Fix compiler warningLokesh Vutla2017-01-17-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Latest gcc 6.2 compiler is throwing the below warning for am335x_baltos_defconfig drivers/usb/gadget/ether.c:501:17: warning: 'mdlm_detail_desc' defined but not used [-Wunused-const-variable=] static const u8 mdlm_detail_desc[] = { Guard mdlm_detail_desc with CONFIG_USB_ETH_SUBSET to avoid the warning Reported-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
| * | | | imx: mx6sllevk: add usb supportPeng Fan2017-01-17-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add usb support for mx6sllevk board. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
| * | | | usb: ehci-mx6: handle vbus-supplyPeng Fan2017-01-17-3/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Drop board_ehci_power when dm usb used and switch to use regulator api to handle vbus. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Marek Vasut <marex@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Stefano Babic <sbabic@denx.de>
| * | | | usb: ehci-mx6: implement ofdata_to_platdataPeng Fan2017-01-17-0/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement ofdata_to_platdata to set the type to host or device. - Check "dr-mode" property. - If there is no "dr-mode", check phy_ctrl for i.MX6 and phy_status for i.MX7 Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Marek Vasut <marex@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Stefano Babic <sbabic@denx.de>
| * | | | drivers: usb: Add USB_XHCI_ZYNQMP to KconfigMichal Simek2017-01-17-2/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move symbol to Kconfig to cleanup configuration file. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | | usb: storage: Show number of storage devices detected for DM_USBMichal Simek2017-01-17-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | By enabling DM_USB information about number of storage devices was lost. Get this information back simply by printing number of devices detected via BLK uclass. For example: scanning bus 0 for devices... 7 USB Device(s) found scanning usb for storage devices... 3 Storage Device(s) found scanning usb for ethernet devices... 0 Ethernet Device(s) found Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | | usb: dwc2-otg: remove unused variableMasahiro Yamada2017-01-17-2/+0
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GCC 6.1 complains about this. drivers/usb/gadget/dwc2_udc_otg.c:72:19: warning: 'driver_desc' defined but not used [-Wunused-const-variable=] static const char driver_desc[] = DRIVER_DESC; ^~~~~~~~~~~ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | | | Merge branch 'master' of git://git.denx.de/u-boot-videoTom Rini2017-01-16-18/+149
|\ \ \ \ | |/ / / |/| | |
| * | | splash: fix splash source flags checktomas.melin@vaisala.com2017-01-13-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SPLASH_STORAGE_RAW is defined as 0, so a check against & will never be true. These flags are never combined so do a check against == instead. Signed-off-by: Tomas Melin <tomas.melin@vaisala.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * | | video: cfb_console: fix hang if splashimage file is missingAnatolij Gustschin2017-01-13-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the splash file doesn't exist, the booting stops bricking the boards. Check return value of prepare function and stop decoding the logo data if splash prepare stage failed. Signed-off-by: Anatolij Gustschin <agust@denx.de>
| * | | splash: add support for loading splash from a FIT imagetomas.melin@vaisala.com2017-01-13-8/+136
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable support for loading a splash image from within a FIT image. The image is assumed to be generated with mkimage -E flag to hold the data external to the FIT. Signed-off-by: Tomas Melin <tomas.melin@vaisala.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
| * | | splash: sort include filestomas.melin@vaisala.com2017-01-13-6/+7
| | |/ | |/| | | | | | | | | | | | | Sort include files in accordance to U-Boot coding style. Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini2017-01-15-757/+0
|\ \ \
| * | | spi: Zap cf_qspi driver and related codeJagan Teki2017-01-15-372/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Dropped becuase - driver not used any board. - no dm conversion. Cc: Angelo Dureghello <angelo@sysam.it> Cc: Richard Retanubun <richardretanubun@ruggedcom.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Acked-by: Angelo Dureghello <angelo@sysam.it>
| * | | spi: Zap ep93xx_spi driver and related codeJagan Teki2017-01-13-385/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Dropped becuase - driver and related configs not used any board. - no dm conversion. Cc: Heiko Schocher <hs@denx.de> Cc: Sergey Kostanbaev <sergey.kostanbaev@gmail.com> Signed-off-by: Jagan Teki <jagan@openedev.com>
* | | | Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini2017-01-15-0/+188
|\ \ \ \
| * | | | sunxi: OrangePi Zero: defconfig: enable SPI flashAndre Przywara2017-01-15-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Newer OrangePi Zero boards all come with 16 Mib SPI flash soldered, from which the board can actually boot from. Enable the SPL support for the SPI controller and SPI flash to allow putting the SPL, the DT and U-Boot proper into there. This will let a board boot without an SD card inserted. The flash chip can be written with a version of the sunxi-fel tool. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Priit Laes <plaes@plaes.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
generated by cgit v1.1 at 2024-11-07 23:38:52 +0000