Merge branch 'master' of git://git.denx.de/u-boot-spi

8 files changed, 0 insertions, 757 deletions

diff --git a/arch/m68k/cpu/mcf52x2/cpu_init.c b/arch/m68k/cpu/mcf52x2/cpu_init.c
index edcb092..7b66720 100644
--- a/arch/m68k/cpu/mcf52x2/cpu_init.c
+++ b/arch/m68k/cpu/mcf52x2/cpu_init.c
@@ -318,18 +318,6 @@ int fecpin_setclear(struct eth_device *dev, int setclear)
 }
 #endif				/* CONFIG_CMD_NET */
 
-#if defined(CONFIG_CF_QSPI)
-
-/* Configure PIOs for SIN, SOUT, and SCK */
-void cfspi_port_conf(void)
-{
-	mbar_writeByte(MCF_GPIO_PAR_QSPI,
-		       MCF_GPIO_PAR_QSPI_SIN_SIN   |
-		       MCF_GPIO_PAR_QSPI_SOUT_SOUT |
-		       MCF_GPIO_PAR_QSPI_SCK_SCK);
-}
-#endif				/* CONFIG_CF_QSPI */
-
 #endif				/* CONFIG_M5271 */
 
 #if defined(CONFIG_M5272)
diff --git a/board/cirrus/edb93xx/edb93xx.c b/board/cirrus/edb93xx/edb93xx.c
index 8963d3a..51ff162 100644
--- a/board/cirrus/edb93xx/edb93xx.c
+++ b/board/cirrus/edb93xx/edb93xx.c
@@ -282,101 +282,3 @@ int dram_init(void)
 	gd->ram_size = dram_init_banksize_int(1);
 	return 0;
 }
-
-
-#ifdef CONFIG_EP93XX_SPI
-#include <spi.h>
-
-/*
- * EGIO0-EGIPO7 -> port A
- * EGIO8-EGIP15 -> port B
- */
-
-static void ep93xx_set_epgio(unsigned num)
-{
-	struct gpio_regs *regs = (struct gpio_regs *)GPIO_BASE;
-	if (num < 8)
-		writel(readl(&regs->padr) | (1<<num), &regs->padr);
-	else
-		writel(readl(&regs->pbdr) | (1<<(num-8)), &regs->pbdr);
-}
-
-static void ep93xx_clear_epgio(unsigned num)
-{
-	struct gpio_regs *regs = (struct gpio_regs *)GPIO_BASE;
-	if (num < 8)
-		writel(readl(&regs->padr) & (~(1<<num)), &regs->padr);
-	else
-		writel(readl(&regs->pbdr) & (~(1<<(num-8))), &regs->pbdr);
-}
-
-static void ep93xx_dir_epgio_out(unsigned num)
-{
-	struct gpio_regs *regs = (struct gpio_regs *)GPIO_BASE;
-	if (num < 8)
-		writel(readl(&regs->paddr) | (1<<num), &regs->paddr);
-	else
-		writel(readl(&regs->pbddr) | (1<<(num-8)), &regs->pbddr);
-}
-
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
-	if (bus == 0 && cs < 16)
-		return 1;
-
-	return 0;
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
-	ep93xx_clear_epgio(slave->cs);
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
-	ep93xx_set_epgio(slave->cs);
-}
-
-#ifdef CONFIG_MMC_SPI
-#include <mmc.h>
-
-#ifndef CONFIG_MMC_SPI_CS_EPGIO
-# define CONFIG_MMC_SPI_CS_EPGIO	4
-#endif
-
-#ifndef CONFIG_MMC_SPI_SPEED
-# define CONFIG_MMC_SPI_SPEED		25000000
-#endif
-
-#ifndef CONFIG_MMC_SPI_MODE
-# define CONFIG_MMC_SPI_MODE		SPI_MODE_0
-#endif
-
-int board_mmc_init(bd_t *bis)
-{
-	struct gpio_regs *regs = (struct gpio_regs *)GPIO_BASE;
-
-	ep93xx_set_epgio(CONFIG_MMC_SPI_CS_EPGIO);
-	ep93xx_dir_epgio_out(CONFIG_MMC_SPI_CS_EPGIO);
-
-#ifdef CONFIG_MMC_SPI_POWER_EGPIO
-	ep93xx_dir_epgio_out(CONFIG_MMC_SPI_POWER_EGPIO);
-	ep93xx_set_epgio(CONFIG_MMC_SPI_POWER_EGPIO);
-#elif defined(CONFIG_MMC_SPI_NPOWER_EGPIO)
-	ep93xx_dir_epgio_out(CONFIG_MMC_SPI_NPOWER_EGPIO);
-	ep93xx_clear_epgio(CONFIG_MMC_SPI_NPOWER_EGPIO);
-#endif
-	struct mmc *mmc = mmc_spi_init(0, CONFIG_MMC_SPI_CS_EPGIO,
-				CONFIG_MMC_SPI_SPEED, CONFIG_MMC_SPI_MODE);
-
-	if (!mmc) {
-		printf("Failed to create MMC Device\n");
-		return 1;
-	}
-	mmc_init(mmc);
-	return 0;
-}
-
-
-#endif /* CONFIG_MMC_SPI */
-#endif /* CONFIG_EP93XX_SPI */
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index c1ce158..896b093 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -23,10 +23,8 @@ obj-$(CONFIG_BFIN_SPI) += bfin_spi.o
 obj-$(CONFIG_BFIN_SPI6XX) += bfin_spi6xx.o
 obj-$(CONFIG_CADENCE_QSPI) += cadence_qspi.o cadence_qspi_apb.o
 obj-$(CONFIG_CF_SPI) += cf_spi.o
-obj-$(CONFIG_CF_QSPI) += cf_qspi.o
 obj-$(CONFIG_DAVINCI_SPI) += davinci_spi.o
 obj-$(CONFIG_DESIGNWARE_SPI) += designware_spi.o
-obj-$(CONFIG_EP93XX_SPI) += ep93xx_spi.o
 obj-$(CONFIG_EXYNOS_SPI) += exynos_spi.o
 obj-$(CONFIG_FSL_DSPI) += fsl_dspi.o
 obj-$(CONFIG_FSL_ESPI) += fsl_espi.o
diff --git a/drivers/spi/cf_qspi.c b/drivers/spi/cf_qspi.c
deleted file mode 100644
index e57e63e..0000000
--- a/drivers/spi/cf_qspi.c
+++ /dev/null
@@ -1,354 +0,0 @@
-/*
- * Freescale Coldfire Queued SPI driver
- *
- * NOTE:
- * This driver is written to transfer 8 bit at-a-time and uses the dedicated
- * SPI slave select pins as bit-banged GPIO to work with spi_flash subsystem.
- *
- * Copyright (C) 2011 Ruggedcom, Inc.
- * Richard Retanubun (richardretanubun@freescale.com)
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <spi.h>
-#include <asm/immap.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define to_cf_qspi_slave(s) container_of(s, struct cf_qspi_slave, slave)
-
-struct cf_qspi_slave {
-	struct spi_slave slave;	/* Specific bus:cs ID for each device */
-	qspi_t *regs;		/* Pointer to SPI controller registers */
-	u16 qmr;		/* QMR: Queued Mode Register */
-	u16 qwr;		/* QWR: Queued Wrap Register */
-	u16 qcr;		/* QCR: Queued Command Ram */
-};
-
-/* Register write wrapper functions */
-static void write_qmr(volatile qspi_t *qspi, u16 val)   { qspi->mr = val; }
-static void write_qdlyr(volatile qspi_t *qspi, u16 val) { qspi->dlyr = val; }
-static void write_qwr(volatile qspi_t *qspi, u16 val)   { qspi->wr = val; }
-static void write_qir(volatile qspi_t *qspi, u16 val)   { qspi->ir = val; }
-static void write_qar(volatile qspi_t *qspi, u16 val)   { qspi->ar = val; }
-static void write_qdr(volatile qspi_t *qspi, u16 val)   { qspi->dr = val; }
-/* Register read wrapper functions */
-static u16 read_qdlyr(volatile qspi_t *qspi) { return qspi->dlyr; }
-static u16 read_qwr(volatile qspi_t *qspi)   { return qspi->wr; }
-static u16 read_qir(volatile qspi_t *qspi)   { return qspi->ir; }
-static u16 read_qdr(volatile qspi_t *qspi)   { return qspi->dr; }
-
-/* These call points may be different for each ColdFire CPU */
-extern void cfspi_port_conf(void);
-static void cfspi_cs_activate(uint bus, uint cs, uint cs_active_high);
-static void cfspi_cs_deactivate(uint bus, uint cs, uint cs_active_high);
-
-int spi_claim_bus(struct spi_slave *slave)
-{
-	return 0;
-}
-void spi_release_bus(struct spi_slave *slave)
-{
-}
-
-__attribute__((weak))
-void spi_init(void)
-{
-	cfspi_port_conf();
-}
-
-__attribute__((weak))
-void spi_cs_activate(struct spi_slave *slave)
-{
-	struct cf_qspi_slave *dev = to_cf_qspi_slave(slave);
-
-	cfspi_cs_activate(slave->bus, slave->cs, !(dev->qwr & QSPI_QWR_CSIV));
-}
-
-__attribute__((weak))
-void spi_cs_deactivate(struct spi_slave *slave)
-{
-	struct cf_qspi_slave *dev = to_cf_qspi_slave(slave);
-
-	cfspi_cs_deactivate(slave->bus, slave->cs, !(dev->qwr & QSPI_QWR_CSIV));
-}
-
-__attribute__((weak))
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
-	/* Only 1 bus and 4 chipselect per controller */
-	if (bus == 0 && (cs >= 0 && cs < 4))
-		return 1;
-	else
-		return 0;
-}
-
-void spi_free_slave(struct spi_slave *slave)
-{
-	struct cf_qspi_slave *dev = to_cf_qspi_slave(slave);
-
-	free(dev);
-}
-
-/* Translate information given by spi_setup_slave to members of cf_qspi_slave */
-struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
-				  unsigned int max_hz, unsigned int mode)
-{
-	struct cf_qspi_slave *dev = NULL;
-
-	if (!spi_cs_is_valid(bus, cs))
-		return NULL;
-
-	dev = spi_alloc_slave(struct cf_qspi_slave, bus, cs);
-	if (!dev)
-		return NULL;
-
-	/* Initialize to known value */
-	dev->regs      = (qspi_t *)MMAP_QSPI;
-	dev->qmr       = 0;
-	dev->qwr       = 0;
-	dev->qcr       = 0;
-
-
-	/* Map max_hz to QMR[BAUD] */
-	if (max_hz == 0) /* Go as fast as possible */
-		dev->qmr = 2u;
-	else /* Get the closest baud rate */
-		dev->qmr = clamp(((gd->bus_clk >> 2) + max_hz - 1)/max_hz,
-					2lu, 255lu);
-
-	/* Map mode to QMR[CPOL] and QMR[CPHA] */
-	if (mode & SPI_CPOL)
-		dev->qmr |= QSPI_QMR_CPOL;
-
-	if (mode & SPI_CPHA)
-		dev->qmr |= QSPI_QMR_CPHA;
-
-	/* Hardcode bit length to 8 bit per transter */
-	dev->qmr |= QSPI_QMR_BITS_8;
-
-	/* Set QMR[MSTR] to enable QSPI as master */
-	dev->qmr |= QSPI_QMR_MSTR;
-
-	/*
-	 * Set QCR and QWR to default values for spi flash operation.
-	 * If more custom QCR and QRW are needed, overload mode variable
-	 */
-	dev->qcr = (QSPI_QDR_CONT | QSPI_QDR_BITSE);
-
-	if (!(mode & SPI_CS_HIGH))
-		dev->qwr |= QSPI_QWR_CSIV;
-
-	return &dev->slave;
-}
-
-/* Transfer 8 bit at a time */
-int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
-	     void *din, unsigned long flags)
-{
-	struct cf_qspi_slave *dev = to_cf_qspi_slave(slave);
-	volatile qspi_t *qspi = dev->regs;
-	u8 *txbuf = (u8 *)dout;
-	u8 *rxbuf = (u8 *)din;
-	u32 count = DIV_ROUND_UP(bitlen, 8);
-	u32 n, i = 0;
-
-	/* Sanitize arguments */
-	if (slave == NULL) {
-		printf("%s: NULL slave ptr\n", __func__);
-		return -1;
-	}
-
-	if (flags & SPI_XFER_BEGIN)
-		spi_cs_activate(slave);
-
-	/* There is something to send, lets process it. spi_xfer is also called
-	 * just to toggle chip select, so bitlen of 0 is valid */
-	if (count > 0) {
-		/*
-		* NOTE: Since chip select is driven as a bit-bang-ed GPIO
-		* using spi_cs_activate() and spi_cs_deactivate(),
-		* the chip select settings inside the controller
-		* (i.e. QCR[CONT] and QWR[CSIV]) are moot. The bits are set to
-		* keep the controller settings consistent with the actual
-		* operation of the bus.
-		*/
-
-		/* Write the slave device's settings for the controller.*/
-		write_qmr(qspi, dev->qmr);
-		write_qwr(qspi, dev->qwr);
-
-		/* Limit transfer to 16 at a time */
-		n = min(count, 16u);
-		do {
-			/* Setup queue end point */
-			write_qwr(qspi, ((read_qwr(qspi) & QSPI_QWR_ENDQP_MASK)
-				| QSPI_QWR_ENDQP((n-1))));
-
-			/* Write Command RAM */
-			write_qar(qspi, QSPI_QAR_CMD);
-			for (i = 0; i < n; ++i)
-				write_qdr(qspi, dev->qcr);
-
-			/* Write TxBuf, if none given, fill with ZEROes */
-			write_qar(qspi, QSPI_QAR_TRANS);
-			if (txbuf) {
-				for (i = 0; i < n; ++i)
-					write_qdr(qspi, *txbuf++);
-			} else {
-				for (i = 0; i < n; ++i)
-					write_qdr(qspi, 0);
-			}
-
-			/* Clear QIR[SPIF] by writing a 1 to it */
-			write_qir(qspi, read_qir(qspi) | QSPI_QIR_SPIF);
-			/* Set QDLYR[SPE] to start sending */
-			write_qdlyr(qspi, read_qdlyr(qspi) | QSPI_QDLYR_SPE);
-
-			/* Poll QIR[SPIF] for transfer completion */
-			while ((read_qir(qspi) & QSPI_QIR_SPIF) != 1)
-				udelay(1);
-
-			/* If given read RxBuf, load data to it */
-			if (rxbuf) {
-				write_qar(qspi, QSPI_QAR_RECV);
-				for (i = 0; i < n; ++i)
-					*rxbuf++ = read_qdr(qspi);
-			}
-
-			/* Decrement count */
-			count -= n;
-		} while (count);
-	}
-
-	if (flags & SPI_XFER_END)
-		spi_cs_deactivate(slave);
-
-	return 0;
-}
-
-/* Each MCF CPU may have different pin assignments for chip selects. */
-#if defined(CONFIG_M5271)
-/* Assert chip select, val = [1|0] , dir = out, mode = GPIO */
-void cfspi_cs_activate(uint bus, uint cs, uint cs_active_high)
-{
-	debug("%s: bus %d cs %d cs_active_high %d\n",
-		__func__, bus, cs, cs_active_high);
-
-	switch (cs) {
-	case 0: /* QSPI_CS[0] = PQSPI[3] */
-		if (cs_active_high)
-			mbar_writeByte(MCF_GPIO_PPDSDR_QSPI, 0x08);
-		else
-			mbar_writeByte(MCF_GPIO_PCLRR_QSPI, 0xF7);
-
-		mbar_writeByte(MCF_GPIO_PDDR_QSPI,
-			mbar_readByte(MCF_GPIO_PDDR_QSPI) | 0x08);
-
-		mbar_writeByte(MCF_GPIO_PAR_QSPI,
-			mbar_readByte(MCF_GPIO_PAR_QSPI) & 0xDF);
-		break;
-	case 1: /* QSPI_CS[1] = PQSPI[4] */
-		if (cs_active_high)
-			mbar_writeByte(MCF_GPIO_PPDSDR_QSPI, 0x10);
-		else
-			mbar_writeByte(MCF_GPIO_PCLRR_QSPI, 0xEF);
-
-		mbar_writeByte(MCF_GPIO_PDDR_QSPI,
-			mbar_readByte(MCF_GPIO_PDDR_QSPI) | 0x10);
-
-		mbar_writeByte(MCF_GPIO_PAR_QSPI,
-			mbar_readByte(MCF_GPIO_PAR_QSPI) & 0x3F);
-		break;
-	case 2: /* QSPI_CS[2] = PTIMER[7] */
-		if (cs_active_high)
-			mbar_writeByte(MCF_GPIO_PPDSDR_TIMER, 0x80);
-		else
-			mbar_writeByte(MCF_GPIO_PCLRR_TIMER, 0x7F);
-
-		mbar_writeByte(MCF_GPIO_PDDR_TIMER,
-			mbar_readByte(MCF_GPIO_PDDR_TIMER) | 0x80);
-
-		mbar_writeShort(MCF_GPIO_PAR_TIMER,
-			mbar_readShort(MCF_GPIO_PAR_TIMER) & 0x3FFF);
-		break;
-	case 3: /* QSPI_CS[3] = PTIMER[3] */
-		if (cs_active_high)
-			mbar_writeByte(MCF_GPIO_PPDSDR_TIMER, 0x08);
-		else
-			mbar_writeByte(MCF_GPIO_PCLRR_TIMER, 0xF7);
-
-		mbar_writeByte(MCF_GPIO_PDDR_TIMER,
-			mbar_readByte(MCF_GPIO_PDDR_TIMER) | 0x08);
-
-		mbar_writeShort(MCF_GPIO_PAR_TIMER,
-			mbar_readShort(MCF_GPIO_PAR_TIMER) & 0xFF3F);
-		break;
-	}
-}
-
-/* Deassert chip select, val = [1|0], dir = in, mode = GPIO
- * direction set as IN to undrive the pin, external pullup/pulldown will bring
- * bus to deassert state.
- */
-void cfspi_cs_deactivate(uint bus, uint cs, uint cs_active_high)
-{
-	debug("%s: bus %d cs %d cs_active_high %d\n",
-		__func__, bus, cs, cs_active_high);
-
-	switch (cs) {
-	case 0: /* QSPI_CS[0] = PQSPI[3] */
-		if (cs_active_high)
-			mbar_writeByte(MCF_GPIO_PCLRR_QSPI, 0xF7);
-		else
-			mbar_writeByte(MCF_GPIO_PPDSDR_QSPI, 0x08);
-
-		mbar_writeByte(MCF_GPIO_PDDR_QSPI,
-			mbar_readByte(MCF_GPIO_PDDR_QSPI) & 0xF7);
-
-		mbar_writeByte(MCF_GPIO_PAR_QSPI,
-			mbar_readByte(MCF_GPIO_PAR_QSPI) & 0xDF);
-		break;
-	case 1: /* QSPI_CS[1] = PQSPI[4] */
-		if (cs_active_high)
-			mbar_writeByte(MCF_GPIO_PCLRR_QSPI, 0xEF);
-		else
-			mbar_writeByte(MCF_GPIO_PPDSDR_QSPI, 0x10);
-
-		mbar_writeByte(MCF_GPIO_PDDR_QSPI,
-			mbar_readByte(MCF_GPIO_PDDR_QSPI) & 0xEF);
-
-		mbar_writeByte(MCF_GPIO_PAR_QSPI,
-			mbar_readByte(MCF_GPIO_PAR_QSPI) & 0x3F);
-		break;
-	case 2: /* QSPI_CS[2] = PTIMER[7] */
-		if (cs_active_high)
-			mbar_writeByte(MCF_GPIO_PCLRR_TIMER, 0x7F);
-		else
-			mbar_writeByte(MCF_GPIO_PPDSDR_TIMER, 0x80);
-
-		mbar_writeByte(MCF_GPIO_PDDR_TIMER,
-			mbar_readByte(MCF_GPIO_PDDR_TIMER) & 0x7F);
-
-		mbar_writeShort(MCF_GPIO_PAR_TIMER,
-			mbar_readShort(MCF_GPIO_PAR_TIMER) & 0x3FFF);
-		break;
-	case 3: /* QSPI_CS[3] = PTIMER[3] */
-		if (cs_active_high)
-			mbar_writeByte(MCF_GPIO_PCLRR_TIMER, 0xF7);
-		else
-			mbar_writeByte(MCF_GPIO_PPDSDR_TIMER, 0x08);
-
-		mbar_writeByte(MCF_GPIO_PDDR_TIMER,
-			mbar_readByte(MCF_GPIO_PDDR_TIMER) & 0xF7);
-
-		mbar_writeShort(MCF_GPIO_PAR_TIMER,
-			mbar_readShort(MCF_GPIO_PAR_TIMER) & 0xFF3F);
-		break;
-	}
-}
-#endif /* CONFIG_M5271 */
diff --git a/drivers/spi/cf_spi.c b/drivers/spi/cf_spi.c
index 6ce1101..7be9427 100644
--- a/drivers/spi/cf_spi.c
+++ b/drivers/spi/cf_spi.c
@@ -279,10 +279,6 @@ static struct spi_slave *cfspi_setup_slave(struct cf_spi_slave *cfslave,
 }
 #endif				/* CONFIG_CF_DSPI */
 
-#ifdef CONFIG_CF_QSPI
-/* 52xx, 53xx */
-#endif				/* CONFIG_CF_QSPI */
-
 #ifdef CONFIG_CMD_SPI
 int spi_cs_is_valid(unsigned int bus, unsigned int cs)
 {
diff --git a/drivers/spi/ep93xx_spi.c b/drivers/spi/ep93xx_spi.c
deleted file mode 100644
index cb682dd..0000000
--- a/drivers/spi/ep93xx_spi.c
+++ /dev/null
@@ -1,272 +0,0 @@
-/*
- * SPI Driver for EP93xx
- *
- * Copyright (C) 2013 Sergey Kostanabev <sergey.kostanbaev <at> fairwaves.ru>
- *
- * Inspired form linux kernel driver and atmel uboot driver
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <spi.h>
-#include <malloc.h>
-
-#include <asm/io.h>
-
-#include <asm/arch/ep93xx.h>
-
-#define SSPBASE			SPI_BASE
-
-#define SSPCR0			0x0000
-#define SSPCR0_MODE_SHIFT	6
-#define SSPCR0_SCR_SHIFT	8
-#define SSPCR0_SPH		BIT(7)
-#define SSPCR0_SPO		BIT(6)
-#define SSPCR0_FRF_SPI		0
-#define SSPCR0_DSS_8BIT		7
-
-#define SSPCR1			0x0004
-#define SSPCR1_RIE		BIT(0)
-#define SSPCR1_TIE		BIT(1)
-#define SSPCR1_RORIE		BIT(2)
-#define SSPCR1_LBM		BIT(3)
-#define SSPCR1_SSE		BIT(4)
-#define SSPCR1_MS		BIT(5)
-#define SSPCR1_SOD		BIT(6)
-
-#define SSPDR			0x0008
-
-#define SSPSR			0x000c
-#define SSPSR_TFE		BIT(0)
-#define SSPSR_TNF		BIT(1)
-#define SSPSR_RNE		BIT(2)
-#define SSPSR_RFF		BIT(3)
-#define SSPSR_BSY		BIT(4)
-#define SSPCPSR			0x0010
-
-#define SSPIIR			0x0014
-#define SSPIIR_RIS		BIT(0)
-#define SSPIIR_TIS		BIT(1)
-#define SSPIIR_RORIS		BIT(2)
-#define SSPICR			SSPIIR
-
-#define SSPCLOCK		14745600
-#define SSP_MAX_RATE		(SSPCLOCK / 2)
-#define SSP_MIN_RATE		(SSPCLOCK / (254 * 256))
-
-/* timeout in milliseconds */
-#define SPI_TIMEOUT		5
-/* maximum depth of RX/TX FIFO */
-#define SPI_FIFO_SIZE		8
-
-struct ep93xx_spi_slave {
-	struct spi_slave slave;
-
-	unsigned sspcr0;
-	unsigned sspcpsr;
-};
-
-static inline struct ep93xx_spi_slave *to_ep93xx_spi(struct spi_slave *slave)
-{
-	return container_of(slave, struct ep93xx_spi_slave, slave);
-}
-
-void spi_init()
-{
-}
-
-static inline void ep93xx_spi_write_u8(u16 reg, u8 value)
-{
-	writel(value, (unsigned int *)(SSPBASE + reg));
-}
-
-static inline u8 ep93xx_spi_read_u8(u16 reg)
-{
-	return readl((unsigned int *)(SSPBASE + reg));
-}
-
-static inline void ep93xx_spi_write_u16(u16 reg, u16 value)
-{
-	writel(value, (unsigned int *)(SSPBASE + reg));
-}
-
-static inline u16 ep93xx_spi_read_u16(u16 reg)
-{
-	return (u16)readl((unsigned int *)(SSPBASE + reg));
-}
-
-static int ep93xx_spi_init_hw(unsigned int rate, unsigned int mode,
-				struct ep93xx_spi_slave *slave)
-{
-	unsigned cpsr, scr;
-
-	if (rate > SSP_MAX_RATE)
-		rate = SSP_MAX_RATE;
-
-	if (rate < SSP_MIN_RATE)
-		return -1;
-
-	/* Calculate divisors so that we can get speed according the
-	 * following formula:
-	 *	rate = spi_clock_rate / (cpsr * (1 + scr))
-	 *
-	 * cpsr must be even number and starts from 2, scr can be any number
-	 * between 0 and 255.
-	 */
-	for (cpsr = 2; cpsr <= 254; cpsr += 2) {
-		for (scr = 0; scr <= 255; scr++) {
-			if ((SSPCLOCK / (cpsr * (scr + 1))) <= rate) {
-				/* Set CHPA and CPOL, SPI format and 8bit */
-				unsigned sspcr0 = (scr << SSPCR0_SCR_SHIFT) |
-					SSPCR0_FRF_SPI | SSPCR0_DSS_8BIT;
-				if (mode & SPI_CPHA)
-					sspcr0 |= SSPCR0_SPH;
-				if (mode & SPI_CPOL)
-					sspcr0 |= SSPCR0_SPO;
-
-				slave->sspcr0 = sspcr0;
-				slave->sspcpsr = cpsr;
-				return 0;
-			}
-		}
-	}
-
-	return -1;
-}
-
-void spi_set_speed(struct spi_slave *slave, unsigned int hz)
-{
-	struct ep93xx_spi_slave *as = to_ep93xx_spi(slave);
-
-	unsigned int mode = 0;
-	if (as->sspcr0 & SSPCR0_SPH)
-		mode |= SPI_CPHA;
-	if (as->sspcr0 & SSPCR0_SPO)
-		mode |= SPI_CPOL;
-
-	ep93xx_spi_init_hw(hz, mode, as);
-}
-
-struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
-			unsigned int max_hz, unsigned int mode)
-{
-	struct ep93xx_spi_slave	*as;
-
-	if (!spi_cs_is_valid(bus, cs))
-		return NULL;
-
-	as = spi_alloc_slave(struct ep93xx_spi_slave, bus, cs);
-	if (!as)
-		return NULL;
-
-	if (ep93xx_spi_init_hw(max_hz, mode, as)) {
-		free(as);
-		return NULL;
-	}
-
-	return &as->slave;
-}
-
-void spi_free_slave(struct spi_slave *slave)
-{
-	struct ep93xx_spi_slave *as = to_ep93xx_spi(slave);
-
-	free(as);
-}
-
-int spi_claim_bus(struct spi_slave *slave)
-{
-	struct ep93xx_spi_slave *as = to_ep93xx_spi(slave);
-
-	/* Enable the SPI hardware */
-	ep93xx_spi_write_u8(SSPCR1, SSPCR1_SSE);
-
-
-	ep93xx_spi_write_u8(SSPCPSR, as->sspcpsr);
-	ep93xx_spi_write_u16(SSPCR0, as->sspcr0);
-
-	debug("Select CS:%d SSPCPSR=%02x SSPCR0=%04x\n",
-	      slave->cs, as->sspcpsr, as->sspcr0);
-	return 0;
-}
-
-void spi_release_bus(struct spi_slave *slave)
-{
-	/* Disable the SPI hardware */
-	ep93xx_spi_write_u8(SSPCR1, 0);
-}
-
-int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
-		const void *dout, void *din, unsigned long flags)
-{
-	unsigned int	len_tx;
-	unsigned int	len_rx;
-	unsigned int	len;
-	u32		status;
-	const u8	*txp = dout;
-	u8		*rxp = din;
-	u8		value;
-
-	debug("spi_xfer: slave %u:%u dout %p din %p bitlen %u\n",
-	      slave->bus, slave->cs, (uint *)dout, (uint *)din, bitlen);
-
-
-	if (bitlen == 0)
-		/* Finish any previously submitted transfers */
-		goto out;
-
-	if (bitlen % 8) {
-		/* Errors always terminate an ongoing transfer */
-		flags |= SPI_XFER_END;
-		goto out;
-	}
-
-	len = bitlen / 8;
-
-
-	if (flags & SPI_XFER_BEGIN) {
-		/* Empty RX FIFO */
-		while ((ep93xx_spi_read_u8(SSPSR) & SSPSR_RNE))
-			ep93xx_spi_read_u8(SSPDR);
-
-		spi_cs_activate(slave);
-	}
-
-	for (len_tx = 0, len_rx = 0; len_rx < len; ) {
-		status = ep93xx_spi_read_u8(SSPSR);
-
-		if ((len_tx < len) && (status & SSPSR_TNF)) {
-			if (txp)
-				value = *txp++;
-			else
-				value = 0xff;
-
-			ep93xx_spi_write_u8(SSPDR, value);
-			len_tx++;
-		}
-
-		if (status & SSPSR_RNE) {
-			value = ep93xx_spi_read_u8(SSPDR);
-
-			if (rxp)
-				*rxp++ = value;
-			len_rx++;
-		}
-	}
-
-out:
-	if (flags & SPI_XFER_END) {
-		/*
-		 * Wait until the transfer is completely done before
-		 * we deactivate CS.
-		 */
-		do {
-			status = ep93xx_spi_read_u8(SSPSR);
-		} while (status & SSPSR_BSY);
-
-		spi_cs_deactivate(slave);
-	}
-
-	return 0;
-}
diff --git a/include/configs/edb93xx.h b/include/configs/edb93xx.h
index a83c617..9080b9a 100644
--- a/include/configs/edb93xx.h
+++ b/include/configs/edb93xx.h
@@ -229,16 +229,6 @@
 #define CONFIG_ENV_SIZE			CONFIG_ENV_SECT_SIZE
 #define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
 
-/* Define to enable MMC on SPI support */
-/* #define CONFIG_EP93XX_SPI_MMC */
-
-#ifdef CONFIG_EP93XX_SPI_MMC
-#define CONFIG_EP93XX_SPI
-#define CONFIG_GENERIC_MMC
-#define CONFIG_MMC_SPI
-#define CONFIG_MMC_SPI_NPOWER_EGPIO	9
-#endif
-
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_USB_OHCI_EP93XX
 #define CONFIG_SYS_USB_OHCI_CPU_INIT
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index d7244c5..4935b91 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -440,7 +440,6 @@ CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 CONFIG_CF_ATASEL_DIS
 CONFIG_CF_ATASEL_ENA
 CONFIG_CF_DSPI
-CONFIG_CF_QSPI
 CONFIG_CF_SBF
 CONFIG_CF_SPI
 CONFIG_CF_V2
@@ -1037,8 +1036,6 @@ CONFIG_EP9312
 CONFIG_EP9315
 CONFIG_EP93XX
 CONFIG_EP93XX_NO_FLASH_CFG
-CONFIG_EP93XX_SPI
-CONFIG_EP93XX_SPI_MMC
 CONFIG_EPH_POWER_EN
 CONFIG_EPOLL
 CONFIG_ESBC_ADDR_64BIT
@@ -1983,8 +1980,6 @@ CONFIG_MMC_SPI_CRC_ON
 CONFIG_MMC_SPI_CS
 CONFIG_MMC_SPI_CS_EPGIO
 CONFIG_MMC_SPI_MODE
-CONFIG_MMC_SPI_NPOWER_EGPIO
-CONFIG_MMC_SPI_POWER_EGPIO
 CONFIG_MMC_SPI_SPEED
 CONFIG_MMC_SUNXI
 CONFIG_MMC_SUNXI_SLOT