summaryrefslogtreecommitdiff
Commit message (Expand)AuthorAgeLines
* MA-9763 Include init.${ro.hardware}.${ro.boot.soc_type}.rc based uboot's soc_...rel_imx_4.9.x_1.0.0_gaimx_v2017.03_4.9.11_1.0.0_gaguoyin.chen2017-09-14-0/+38
* MA-9554[Android_6DL_SD]RTC: Sometimes the RTC reset to the initial time 1970 ...n7.1.2_2.0.0-gaZhang Bo2017-09-07-0/+12
* MLK-16069 imx6slevk: Workaround to limit the u-boot in low 512MB memoryYe Li2017-07-25-0/+11
* MA-9387 [Android] fastboot: fastboot gpt.img for sd card in androidzhang sanshan2017-07-19-5/+107
* MLK-15341 mx6qpsabresd: add PHY AR8031 hw resetFugang Duan2017-07-12-10/+22
* MA-9822 Device has to be booted manually to recovery mode to apply the OTA up...zhang sanshan2017-07-11-4/+4
* MA-9857 [Android] uboot change CONFIG_NAND_BOOTzhang sanshan2017-07-10-17/+17
* MA-9789 [fastboot]System doesn't enter fastboot mode automatically while ther...zhang sanshan2017-07-10-1/+1
* MA-9409-3 Add base board support for android and android things.zhang sanshan2017-07-10-445/+6461
* MA-9409-2 fix some issue for android and android thingszhang sanshan2017-07-10-33/+300
* MA-9409-1 enable avb on android things.zhang sanshan2017-07-10-10/+9367
* MA-9702-2 [Android] Enable booti for android arm64.sanshan zhang2017-07-10-6/+57
* MA-9382 [Android] uboot: enable BCB&BOOTCTR&LOCK_UNLOCKzhang sanshan2017-06-21-5/+50
* MA-9382 [Android]uboot: fix compiler issue and command line issue.zhang sanshan2017-06-21-39/+23
* MA-9376 [Android IMX] uboot: enable lock&unlockzhang sanshan2017-06-21-47/+1817
* MA-9375 [Android IMX] uboot: enable BCB and bootctrlzhang sanshan2017-06-21-838/+1154
* MLK-15127 mx7dsdb: fix epdc en gpio usagePeng Fan2017-06-21-0/+1
* MLK-15108 mx7d_12x12_lpddr3_arm2: Fix PMIC setting issueYe Li2017-06-20-1/+1
* MLK-13723 imx7d: restore epdc QoS setting after exit the lpsr modeRobby Cai2017-06-20-0/+58
* MLK-15087 mx7ulp_evk: Add m4 boot defconfigYe Li2017-06-20-0/+44
* MLK-15086 arm: Add firmware_image section to objcopy flagsYe Li2017-06-20-0/+4
* MLK-14994 mx7ulp: Update M4 image header version checkYe Li2017-06-20-1/+1
* MLK-14533 mx7ulp_evk: Change APLL and its PFD0 frequenciesYe Li2017-06-12-2/+26
* MLK-15044 DTS: mx6ul/ullevk: Add OTG ID pin muxYe Li2017-06-12-0/+32
* MLK-14930-2 dwc_ahsata: Fix memory issue in reset_sataYe Li2017-05-24-0/+3
* MLK-14930-1 cmd: sata: Fix sata init and stop issueYe Li2017-05-24-3/+9
* MLK-14958 mx6slevk: Move setup_spi to board_initYe Li2017-05-22-5/+7
* MLK-14945 HAB: Check IVT DCD pointer before authenticating imageYe Li2017-05-22-0/+11
* MLK-14915 mx6ul_arm2/mx6ull_arm2: Fix ENET PHY reset issueYe Li2017-05-15-27/+59
* MLK-14890 i2c: Enable I2C force idle busYe Li2017-05-15-91/+648
* MLK-14891 mx6slevk/mx6sll_arm2: Fix SPINOR CS GPIO usingYe Li2017-05-14-0/+4
* MLK-14772 net: fec: set the device->seq id to priv->dev_idFugang Duan2017-05-12-5/+3
* MLK-14877 DTB: mx6sllevk: Fix usdhc2 property issueYe Li2017-05-11-1/+1
* ARM: fixed relocation using proper alignmentManfred Schlaegl2017-05-11-1/+1
* MLK-14864: regulator: pfuze100: unsigned compared against 0Peng Fan2017-05-11-3/+9
* MLK-14862 net: eth-uclass: add return value checkPeng Fan2017-05-11-2/+12
* MLK-14840: pinctrl: imx: fix resource leakPeng Fan2017-05-11-0/+5
* MLK-14878 qspi: Fix issue when enabling DDR modeYe Li2017-05-10-7/+13
* MLK-14808 mx6sxsabresd: Fix wrong configuration name for QSPI bootYe Li2017-05-10-1/+1
* MLK-14792 mx6ull: Disable WDOG3 after initYe Li2017-05-10-1/+1
* MLK-14839-2 imx: clean up print info for thermal and reset causeYe Li2017-05-09-3/+4
* MLK-14839-1 mx6: Fix wrong CPU frequencyYe Li2017-05-09-1/+1
* MLK-14845 mx6/mx7: Not call usb setup functions used by non-DM driverYe Li2017-05-09-1/+101
* MLK-14775 mx7dsabresd: Disable USDHC2 in device treeYe Li2017-05-08-1/+1
* MLK-14828 env_sata: Fix SATA saveenv issueYe Li2017-05-08-1/+1
* MLK-14768 fec: Change CONFIG_ETHPRIME name to align with DM ETHYe Li2017-05-08-0/+92
* MLK-14831 mx6: Fix wrong bmode value used for usb bootYe Li2017-05-08-1/+1
* MLK-14779 mx6qdlsabreauto: Fix usb detect issueYe Li2017-05-08-26/+6
* MLK-14777 imx: mx6ul/mx6ull/mx7d: correct the usage of the macro PFUZE3000_SW...Fugang Duan2017-05-04-14/+14
* MLK-14776 imx6sl: add enet phy reset to i.MX6SL EVK boardFugang Duan2017-05-03-7/+8