summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
...
* ENGR00119505 MX51 BBG: Change DDR2 settingsLily Zhang2009-12-19-6/+6
| | | | | | | 1. Change the drive strength of DRAM PAD as high 2. Change ESDCFG setting Signed-off-by: Lily Zhang <r58066@freescale.com>
* ENGR00119486 MX25: Improve Lan9217 ethernet transfer speedSammy He2009-12-18-3/+1
| | | | | | Speed is too slow on MX25, remove udelay in cspi driver Signed-off-by: Sammy He <r62914@freescale.com>
* ENGR00119254: Add mmu header for mx51 build errorTerry Lv2009-12-11-0/+135
| | | | | | Add mmu header for mx51 build error. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00119246 Add CONFIG_MXC_NAND config flag in MX25 platformJason2009-12-11-1/+1
| | | | | | Add CONFIG_MXC_NAND config flag in MX25 platform Signed-off-by: Jason Liu <r64343@freescale.com>
* ENGR00118998: Can not get ip address when kernel boot upTerry Lv2009-12-11-0/+12
| | | | | | Kernel need uboot to set fec mac address. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00119224: mmu support for mx51 3stack and mx51 bbgTerry Lv2009-12-11-4/+155
| | | | | | mmu support for mx51 3stack and mx51 bbg. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00119171: ubifs support for android recovery mode.Terry Lv2009-12-11-239/+337
| | | | | | ubifs support for android recovery mode. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00119133: MX35 can't boot due to wrong frequency settingTerry Lv2009-12-09-3/+10
| | | | | | MX35 can't boot due to wrong frequency setting. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00118789 Uboot:Update NAND scan scheme to support new nand typeJason2009-12-08-14/+2518
| | | | | | | | Update NAND scan scheme to support new nand type. With this patch uboot can support new NAND flash on mx25/mx35 board while compatible with old NAND on old boards. Signed-off-by: Jason Liu <r64343@freescale.com>
* ENGR00118978: Timer adjustment for all platformsFred Fan2009-12-04-151/+170
| | | | | | | | | In current u-boot design, get_timer_masked is not correct and udelay is not accurate when the time is less than 1000us. Thus we need to use ipg clock source for accurate timer. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00118579 Enable MMUrel_imx_2.6.31_09.12.00_RC1Fred Fan2009-11-30-1/+296
| | | | | | | To enable MMU, it is porting from redboot. Enable MMU and enable I/D cache. Signed-off-by:Fred Fan <r01011@freescale.com>
* ENGR00118801: Unknown information when booting from SPI-NOR.Terry Lv2009-11-27-2/+2
| | | | | | No 'boot up from' information when booting from NOR-SPI. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00118751: Some mmc card can't read and write from right offset.Terry Lv2009-11-27-13/+46
| | | | | | | | Some mmc card can't read and write from right offset. Driver see these card as high capacity and use sector mode for them. This will lead to read and write corrupt. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00118816 Fix reboot/reset failure with image on nandSammy He2009-11-26-4/+45
| | | | | | Reset CPLD registers to fix reboot/reset failure issue. Signed-off-by: Sammy He <r62914@freescale.com>
* ENGR00118682 Update the MX25 MAX PrioritySammy He2009-11-23-0/+25
| | | | | | Update the priority list for MX25 MAX xbar. Signed-off-by: Sammy He <r62914@freescale.com>
* ENGR00118647 Fix smc911x receive packet length not set correctlySammy He2009-11-20-1/+1
| | | | | | | Fix smc911x receive packet length not set correctly issue. This caused MX25 tftp timeout sometimes. Signed-off-by: Sammy He <r62914@freescale.com>
* ENGR00118576 MX25: Support Smc911x ethernetSammy He2009-11-20-49/+524
| | | | | | | 1. Add imx cspi support for cpld access. 2. Add smc911x ethernet support from cpld. Signed-off-by: Sammy He <r62914@freescale.com>
* ENGR00118428 MX233 Uboot: reslove the build error for branch imx_v2009.08Lionel Xu2009-11-13-7/+9
| | | | | | | bd->bi_enetaddr was removed in one of the previous patchs, some changes must be done to avoid building error. Signed-off-by: Lionel Xu <r63889@freescale.com>
* ENGR00118362: Correct recovery NAND cmdTerry Lv2009-11-12-130/+66
| | | | | | | | | This patch will fix three issues: 1. Add boot device detection. 2. Use right nand command in anroid for recovery mode. 3. Recovery mode code clean. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00118294: Misc changes for v2009.08 upgrade.Terry Lv2009-11-11-386/+657
| | | | | | Misc changes for v2009.08 upgrade. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00116772 Workaround for ARM errata ID #468414Jason2009-11-04-0/+10
| | | | | | | | Workaround for ARM errata ID #468414, This erratum is referenced in ARM Core Cortex-A8 Errata Notice [1], ID 468414. Signed-off-by:Jason Liu <r64343@freescale.com> (cherry picked from commit 549c17b69a5052c61a979ba679bd1dbd33a4153d)
* ENGR00117616: PATA support in u-boot.Terry Lv2009-11-04-5/+1039
| | | | | | PATA support in u-boot. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00116924 Uboot: Boot up hang at detecting NAND when cold bootJason2009-11-04-21/+55
| | | | | | | | | | Boot from MMC card failed at detecting NAND. The fix will 1. Set RBB_MODE to 1 and using atomic status command 2. Set FW correctly by adding CONFIG_NAND_FW_8 config 3. Correct the BLS register value Signed-off-by:Jason Liu <r64343@freescale.com> (cherry picked from commit 7142651386271c340a6ae061a6e2893695675724)
* ENGR00116504-2: Add mx51 bbg to3 support.Terry Lv2009-11-04-18/+81
| | | | | | Add mx51 bbg to3 support. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00116504-1: Sync clock and l2cc code with redboot.Terry Lv2009-11-04-73/+102
| | | | | | | Syc clock and l2cc code with redboot. Signed-off-by: Terry Lv <r65388@freescale.com> (cherry picked from commit f712613010e3bf2c186f05a1b7381483d733b925)
* u-boot v2009.08 sd/mmc support.Terry Lv2009-11-03-4026/+1295
| | | | Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00116472-1 U-BOOT upgrade to V2009.08Fred Fan2009-09-14-715/+202
| | | | | | | | | | U-BOOT upgrade from V2009.01 to V2009.08 Initial version for i.MX51 BBG board. Support: FEC, SPI, spi Nor Flash Boot from spi nor flash and mmc/sd Signed-off-by:Fred Fan <r01011@freescale.com>
* ENGR00116243: I2C support for mx51 3ds board.Terry Lv2009-09-10-25/+108
| | | | | | I2C support for mx51 3ds board. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00116203: Change nand Makefile to use CONFIG_MXC_NAND.Terry Lv2009-09-10-5/+8
| | | | | | Change nand Makefile to use CONFIG_MXC_NAND. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00116083: Recovery mode support for Android on mx51.Terry Lv2009-09-10-13/+1695
| | | | | | Recovery mode support for Android on mx51. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00116140 MX51 3stack low level does not set M4IF correctlyXinyu Chen2009-09-10-2/+11
| | | | | | Copy babbage settings to 3stack Signed-off-by: Xinyu Chen <xinyu.chen@freescale.com>
* ENGR00115592: Replace whitespaces with tabs in MakefileTerry Lv2009-09-10-1/+1
| | | | | | Replace whitespaces with tabs in Makefile. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00115046: Add new MMC config option for mx35.Terry Lv2009-09-10-28/+257
| | | | | | Add new MMC config option for mx35. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00115333: Enable cp command for MMCTerry Lv2009-09-10-101/+103
| | | | | | Enable cp command for MMC. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00113941 MX233: Make UBOOT v2009.01 work on EVK boardLionel Xu2009-09-10-1/+2720
| | | | | | | | Porting MX233 UBOOT from 1.3.3 to V2009.01. Clear old cfg macro, such as CFG_HZ. Change MAC address getting source from initial configuration to On-Chip OTP. Signed-off-by: Lionel Xu <r63889@freescale.com>
* ENGR00114746: Disable flash header for mx35 nand bootTerry Lv2009-09-10-4/+7
| | | | | | Disable flash header for mx35 nand boot. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00114367: Add BABBAGE machine id, BBG2.5 rev id for rootfs init.Terry Lv2009-09-10-3/+19
| | | | | | Update mach-types for BBG board. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00114393: Support Atmel AT45DB321D SPI NOR flash.Terry Lv2009-09-10-2/+551
| | | | | | Support Atmel AT45DB321D SPI NOR flash. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00114178 Support MMC/SD boot and enable dhcp in uboot on MX25Sammy2009-09-10-2/+355
| | | | | | | | 1. Support MMC/SD boot in uboot, however, it is disabled default and user needs to enable manually by changing mx25_3stack.h; 2. Enable dhcp for network. Signed-off-by: Sammy He <r62914@freescale.com>
* ENGR00114201: Add MMC configs to mx35 3stack config file.Terry Lv2009-09-10-86/+81
| | | | | | Add MMC configs to mx35 3stack config file. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00114236 Disable NAND driver interleave mode supportJason2009-09-10-23/+13
| | | | | | Disable NAND driver interleave mode support Signed-off-by:Jason Liu <r64343@freescale.com>
* ENGR00114233 Add support for programming ubifs image on nand flashJason2009-09-10-0/+67
| | | | | | Add support for programming ubifs image on nand flash Signed-off-by:Jason Liu <r64343@freescale.com>
* ENGR00111465: Remove Watchdog disable codes in MX51 uboot.Terry Lv2009-09-10-2/+0
| | | | | | Remove Watchdog disable codes in MX51 uboot. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00113611: Add FEC support for BBG2.Terry Lv2009-09-10-61/+289
| | | | | | Add FEC support for BBG2. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00113475: Add auto-complete and platform prompt for each platform.Terry Lv2009-09-10-4/+8
| | | | | | Add auto-complete and platform prompt for each platform. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00113439: BBG2, enable SPI NOR and MMC in one image.Terry Lv2009-09-10-19/+20
| | | | | | BBG2, enable SPI NOR and MMC in one image. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00113148 Add build option to uboot for different media typeJason2009-09-10-9/+18
| | | | | | | 1. Add build option to uboot for different media type 2. fix the spi-nor link error Signed-off-by:Jason Liu <r64343@freescale.com>
* ENGR00112845 spi nor boot and pmic support for BBG2.Terry Lv2009-09-10-5/+1295
| | | | | | spi nor boot support for BBG2. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00112273 BBG2: MMC boot support.Terry Lv2009-09-10-61/+4234
| | | | | | BBG2: MMC boot support. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00112298 BBG2: Basic boot.r653882009-09-10-0/+1103
| | | | | | Basic boot on BBG2 board. Signed-off-by: r65388 <r65388@freescale.com>
generated by cgit v1.1 at 2024-11-21 17:52:06 +0000