ENGR00123630 Set ddr clk clock according to the board IDrel_imx_2.6.31_10.05.02imx_v2009.08_10.05.02

Set DDR clock to 400Mhz on MX53-EVK with DDR2 1GByte RevB
Set DDR clock to 300Mhz on MX53-EVK with DDR2 2GByte RevA1

Remove the clock dump during boot, user can use clk command to
get the clock information. Using help clk to get the command help

Signed-off-by:Jason Liu <r64343@freescale.com>

2 files changed, 35 insertions, 23 deletions

diff --git a/board/freescale/mx53_evk/mx53_evk.c b/board/freescale/mx53_evk/mx53_evk.c
index 6be0b37..98d5938 100644
--- a/board/freescale/mx53_evk/mx53_evk.c
+++ b/board/freescale/mx53_evk/mx53_evk.c
@@ -44,6 +44,10 @@
 #include <asm/arch/mmu.h>
 #endif
 
+#ifdef CONFIG_CMD_CLOCK
+#include <asm/clock.h>
+#endif
+
 DECLARE_GLOBAL_DATA_PTR;
 
 static u32 system_rev;
@@ -415,6 +419,25 @@ static int __print_board_info(int id0, int id1)
 	return ret;
 }
 
+static int _identify_board_fix_up(int id0, int id1)
+{
+	int ret = 0;
+
+#ifdef CONFIG_CMD_CLOCK
+	/* For EVK RevB, set DDR to 400MHz */
+	if (id0 == 21 && id1 == 15) {
+		ret = clk_config(CONFIG_REF_CLK_FREQ, 400, PERIPH_CLK);
+		if (ret < 0)
+			return ret;
+
+		ret = clk_config(CONFIG_REF_CLK_FREQ, 400, DDR_CLK);
+		if (ret < 0)
+			return ret;
+	}
+#endif
+	return ret;
+}
+
 int identify_board_id(void)
 {
 	int ret = 0;
@@ -440,6 +463,10 @@ int identify_board_id(void)
 		return ret;
 
 	ret = __print_board_info(bd_id0, bd_id1);
+	if (ret < 0)
+		return ret;
+
+	ret = _identify_board_fix_up(bd_id0, bd_id1);
 
 	return ret;
 
@@ -682,7 +709,7 @@ int board_late_init(void)
 
 int checkboard(void)
 {
-	printf("Board:   ");
+	printf("Board: ");
 
 #ifdef CONFIG_I2C_MXC
 	identify_board_id();
diff --git a/cpu/arm_cortexa8/mx53/generic.c b/cpu/arm_cortexa8/mx53/generic.c
index 26a7894..791c0c3 100644
--- a/cpu/arm_cortexa8/mx53/generic.c
+++ b/cpu/arm_cortexa8/mx53/generic.c
@@ -641,8 +641,8 @@ int clk_info(u32 clk_type)
 			mxc_get_clock(MXC_DDR_CLK));
 		break;
 	case ALL_CLK:
-		printf("cpu clock: %dHz\n",
-			mxc_get_clock(MXC_ARM_CLK));
+		printf("cpu clock: %dMHz\n",
+			mxc_get_clock(MXC_ARM_CLK) / SZ_DEC_1M);
 		mxc_dump_clocks();
 		break;
 	default:
@@ -702,6 +702,8 @@ u32 calc_per_cbcdr_val(u32 per_clk, u32 cbcmr)
 
 #define CHANGE_PLL_SETTINGS(base, pd, mfi, mfn, mfd) \
 	{	\
+		writel(0x1232, base + PLL_DP_CTL); \
+		writel(0x2, base + PLL_DP_CONFIG);    \
 		writel(((pd - 1) << 0) | (mfi << 4),	\
 			base + PLL_DP_OP);	\
 		writel(mfn, base + PLL_DP_MFN);	\
@@ -710,6 +712,9 @@ u32 calc_per_cbcdr_val(u32 per_clk, u32 cbcmr)
 			base + PLL_DP_HFS_OP);	\
 		writel(mfn, base + PLL_DP_HFS_MFN);	\
 		writel(mfd - 1, base + PLL_DP_HFS_MFD);	\
+		writel(0x1232, base + PLL_DP_CTL); \
+		while (!readl(base + PLL_DP_CTL) & 0x1)  \
+			; \
 	}
 
 int config_pll_clk(enum pll_clocks pll, struct pll_param *pll_param)
@@ -815,15 +820,6 @@ int config_periph_clk(u32 ref, u32 freq)
 		u32 old_cbcmr = readl(CCM_BASE_ADDR + CLKCTL_CBCMR);
 		u32 cbcdr = 0;
 
-		/* Set PLL3 to 400MHz */
-		ret = calc_pll_params(ref, 400000000, &pll_param);
-		if (ret != 0) {
-			printf("Can't find pll parameters: %d\n",
-				ret);
-			return ret;
-		}
-		config_pll_clk(PLL3_CLK, &pll_param);
-
 		/* Switch peripheral to PLL3 */
 		writel(0x00015154, CCM_BASE_ADDR + CLKCTL_CBCMR);
 		writel(0x02888945, CCM_BASE_ADDR + CLKCTL_CBCDR);
@@ -850,16 +846,6 @@ int config_periph_clk(u32 ref, u32 freq)
 		/* Make sure change is effective */
 		while (readl(CCM_BASE_ADDR + CLKCTL_CDHIPR) != 0)
 			;
-
-		/* Switch PLL3's freq back */
-		ret = calc_pll_params(ref, pll3_freq, &pll_param);
-		if (ret != 0) {
-			printf("Can't find pll parameters: %d\n",
-				ret);
-			return ret;
-		}
-		config_pll_clk(PLL3_CLK, &pll_param);
-
 		puts("\n");
 	}
 
@@ -974,7 +960,6 @@ int print_cpuinfo(void)
 	       (get_board_rev() & 0xFF) >> 4,
 	       (get_board_rev() & 0xF),
 		__get_mcu_main_clk() / 1000000);
-	mxc_dump_clocks();
 	return 0;
 }
 #endif