diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/asm-arm/arch-mx53/imx_spi_nor.h | 70 | ||||
| -rw-r--r-- | include/asm-arm/arch-mx53/iomux.h | 249 | ||||
| -rw-r--r-- | include/asm-arm/arch-mx53/mx53.h | 422 | ||||
| -rw-r--r-- | include/asm-arm/arch-mx53/mx53_pins.h | 374 | ||||
| -rw-r--r-- | include/asm-arm/mach-types.h | 13 | ||||
| -rw-r--r-- | include/configs/mx53_evk.h | 225 |
6 files changed, 1353 insertions, 0 deletions
diff --git a/include/asm-arm/arch-mx53/imx_spi_nor.h b/include/asm-arm/arch-mx53/imx_spi_nor.h new file mode 100644 index 0000000..9425d59 --- /dev/null +++ b/include/asm-arm/arch-mx53/imx_spi_nor.h @@ -0,0 +1,70 @@ +/* + * (C) Copyright 2008-2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _IMX_SPI_NOR_H_ +#define _IMX_SPI_NOR_H_ + +#define READ 0x03 /* tx:1 byte cmd + 3 byte addr;rx:variable bytes */ +#define READ_HS 0x0B /* tx:1 byte cmd + 3 byte addr + 1 byte dummy; */ +#define RDSR 0x05 /* read stat reg 1 byte tx cmd + 1 byte rx status */ +#define RDSR_BUSY (1 << 0) /* 1=write-in-progress (default 0) */ +#define RDSR_WEL (1 << 1) /* 1=write enable (default 0) */ +#define RDSR_BP0 (1 << 2) /* block write prot level (default 1) */ +#define RDSR_BP1 (1 << 3) /* block write prot level (default 1) */ +#define RDSR_BP2 (1 << 4) /* block write prot level (default 1) */ +#define RDSR_BP3 (1 << 5) /* block write prot level (default 1) */ +#define RDSR_AAI (1 << 6) /* 1=AAI prog mode; 0=byte prog (def 0) */ +#define RDSR_BPL (1 << 7) /* 1=BP3,BP2,BP1,BP0 RO; 0=R/W (def 0) */ +#define WREN 0x06 /* write enable. 1 byte tx cmd */ +#define WRDI 0x04 /* write disable. 1 byte tx cmd */ +#define EWSR 0x50 /* Enable write status. 1 byte tx cmd */ +#define WRSR 0x01 /* Write stat reg. 1 byte tx cmd + 1 byte tx val */ +#define ERASE_4K 0x20 /* sector erase. 1 byte cmd + 3 byte addr */ +#define ERASE_32K 0x52 /* 32K block erase. 1 byte cmd + 3 byte addr */ +#define ERASE_64K 0xD8 /* 64K block erase. 1 byte cmd + 3 byte addr */ +#define ERASE_CHIP 0x60 /* whole chip erase */ +#define BYTE_PROG 0x02 /* all tx: 1 cmd + 3 addr + 1 data */ +#define AAI_PROG 0xAD /* all tx: [1 cmd + 3 addr + 2 data] + RDSR */ + /* + [1cmd + 2 data] + .. + [WRDI] + [RDSR] */ +#define JEDEC_ID 0x9F /* read JEDEC ID. tx: 1 byte cmd; rx: 3 byte ID */ + +/* Atmel SPI-NOR commands */ +#define WR_2_MEM_DIR 0x82 +#define BUF1_WR 0x84 +#define BUF2_WR 0x87 +#define BUF1_TO_MEM 0x83 +#define BUF2_TO_MEM 0x86 +#define STAT_READ 0xD7 +#define STAT_PG_SZ (1 << 0) /* 1=Page size is 512, 0=Page size is 528 */ +#define STAT_PROT (1 << 1) /* 1=sector protection enabled (default 0) */ +#define STAT_COMP (1 << 6) +#define STAT_BUSY (1 << 7) /* 1=Device not busy */ +#define CONFIG_REG1 0x3D +#define CONFIG_REG2 0x2A +#define CONFIG_REG3 0x80 +#define CONFIG_REG4 0xA6 + +#define SZ_64K 0x10000 +#define SZ_32K 0x8000 +#define SZ_4K 0x1000 + +#endif /* _IMX_SPI_NOR_H_ */ diff --git a/include/asm-arm/arch-mx53/iomux.h b/include/asm-arm/arch-mx53/iomux.h new file mode 100644 index 0000000..2184863 --- /dev/null +++ b/include/asm-arm/arch-mx53/iomux.h @@ -0,0 +1,249 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef __MACH_MX53_IOMUX_H__ +#define __MACH_MX53_IOMUX_H__ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/mx53.h> +#include <asm/arch/mx53_pins.h> + +/*! + * @file mach-mx53/iomux.h + * + * @brief I/O Muxing control definitions and functions + * + * @ingroup GPIO_MX53 + */ + +typedef unsigned int iomux_pin_name_t; + +/*! + * various IOMUX output functions + */ +typedef enum iomux_config { + IOMUX_CONFIG_ALT0, /*!< used as alternate function 0 */ + IOMUX_CONFIG_ALT1, /*!< used as alternate function 1 */ + IOMUX_CONFIG_ALT2, /*!< used as alternate function 2 */ + IOMUX_CONFIG_ALT3, /*!< used as alternate function 3 */ + IOMUX_CONFIG_ALT4, /*!< used as alternate function 4 */ + IOMUX_CONFIG_ALT5, /*!< used as alternate function 5 */ + IOMUX_CONFIG_ALT6, /*!< used as alternate function 6 */ + IOMUX_CONFIG_ALT7, /*!< used as alternate function 7 */ + IOMUX_CONFIG_GPIO, /*!< added to help user use GPIO mode */ + IOMUX_CONFIG_SION = 0x1 << 4, /*!< used as LOOPBACK:MUX SION bit */ +} iomux_pin_cfg_t; + +/*! + * various IOMUX pad functions + */ +typedef enum iomux_pad_config { + PAD_CTL_SRE_SLOW = 0x0 << 0, + PAD_CTL_SRE_FAST = 0x1 << 0, + PAD_CTL_DRV_LOW = 0x0 << 1, + PAD_CTL_DRV_MEDIUM = 0x1 << 1, + PAD_CTL_DRV_HIGH = 0x2 << 1, + PAD_CTL_DRV_MAX = 0x3 << 1, + PAD_CTL_ODE_OPENDRAIN_NONE = 0x0 << 3, + PAD_CTL_ODE_OPENDRAIN_ENABLE = 0x1 << 3, + PAD_CTL_100K_PD = 0x0 << 4, + PAD_CTL_47K_PU = 0x1 << 4, + PAD_CTL_100K_PU = 0x2 << 4, + PAD_CTL_22K_PU = 0x3 << 4, + PAD_CTL_PUE_KEEPER = 0x0 << 6, + PAD_CTL_PUE_PULL = 0x1 << 6, + PAD_CTL_PKE_NONE = 0x0 << 7, + PAD_CTL_PKE_ENABLE = 0x1 << 7, + PAD_CTL_HYS_NONE = 0x0 << 8, + PAD_CTL_HYS_ENABLE = 0x1 << 8, + PAD_CTL_DDR_INPUT_CMOS = 0x0 << 9, + PAD_CTL_DDR_INPUT_DDR = 0x1 << 9, + PAD_CTL_DRV_VOT_LOW = 0x0 << 13, + PAD_CTL_DRV_VOT_HIGH = 0x1 << 13, +} iomux_pad_config_t; + +/*! + * various IOMUX input select register index + */ +typedef enum iomux_input_select { + MUX_IN_AUDMUX_P4_INPUT_DA_AMX_SELECT_I = 0, + MUX_IN_AUDMUX_P4_INPUT_DB_AMX_SELECT_I, + MUX_IN_AUDMUX_P4_INPUT_RXCLK_AMX_SELECT_INPUT, + MUX_IN_AUDMUX_P4_INPUT_RXFS_AMX_SELECT_INPUT, + MUX_IN_AUDMUX_P4_INPUT_TXCLK_AMX_SELECT_INPUT, + MUX_IN_AUDMUX_P4_INPUT_TXFS_AMX_SELECT_INPUT, + MUX_IN_AUDMUX_P5_INPUT_DA_AMX_SELECT_I, + MUX_IN_AUDMUX_P5_INPUT_DB_AMX_SELECT_I, + MUX_IN_AUDMUX_P5_INPUT_RXCLK_AMX_SELECT_INPUT, + MUX_IN_AUDMUX_P5_INPUT_RXFS_AMX_SELECT_INPUT, + MUX_IN_AUDMUX_P5_INPUT_TXCLK_AMX_SELECT_INPUT, + MUX_IN_AUDMUX_P5_INPUT_TXFS_AMX_SELECT_INPUT, + MUX_IN_CAN1_IPP_IND_CANRX_SELECT_INPUT, /*0x760*/ + MUX_IN_CAN2_IPP_IND_CANRX_SELECT_INPUT, + MUX_IN_CCM_IPP_ASRC_EXT_SELECT_INPUT, + MUX_IN_CCM_IPP_DI1_CLK_SELECT_INPUT, + MUX_IN_CCM_PLL1_BYPASS_CLK_SELECT_INPUT, + MUX_IN_CCM_PLL2_BYPASS_CLK_SELECT_INPUT, + MUX_IN_CCM_PLL3_BYPASS_CLK_SELECT_INPUT, + MUX_IN_CCM_PLL4_BYPASS_CLK_SELECT_INPUT, + MUX_IN_CSPI_IPP_CSPI_CLK_IN_SELECT_INPUT, /*0x780*/ + MUX_IN_CSPI_IPP_IND_MISO_SELECT_INPUT, + MUX_IN_CSPI_IPP_IND_MOSI_SELECT_INPUT, + MUX_IN_CSPI_IPP_IND_SS_B_1_SELECT_INPUT, + MUX_IN_CSPI_IPP_IND_SS_B_2_SELECT_INPUT, + MUX_IN_CSPI_IPP_IND_SS_B_3_SELECT_INPUT, + MUX_IN_CSPI_IPP_IND_SS_B_4_SELECT_INPUT, + MUX_IN_ECSPI1_IPP_CSPI_CLK_IN_SELECT_INPUT, + MUX_IN_ECSPI1_IPP_IND_MISO_SELECT_INPUT, + MUX_IN_ECSPI1_IPP_IND_MOSI_SELECT_INPUT, + MUX_IN_ECSPI1_IPP_IND_SS_B_1_SELECT_INPUT, + MUX_IN_ECSPI1_IPP_IND_SS_B_2_SELECT_INPUT, + MUX_IN_ECSPI1_IPP_IND_SS_B_3_SELECT_INPUT, /*0x7B0*/ + MUX_IN_ECSPI1_IPP_IND_SS_B_4_SELECT_INPUT, + MUX_IN_ECSPI2_IPP_CSPI_CLK_IN_SELECT_INPUT, + MUX_IN_ECSPI2_IPP_IND_MISO_SELECT_INPUT, + MUX_IN_ECSPI2_IPP_IND_MOSI_SELECT_INPUT, + MUX_IN_ECSPI2_IPP_IND_SS_B_1_SELECT_INPUT, + MUX_IN_ECSPI2_IPP_IND_SS_B_2_SELECT_INPUT, + MUX_IN_ESAI1_IPP_IND_FSR_SELECT_INPUT, + MUX_IN_ESAI1_IPP_IND_FST_SELECT_INPUT, + MUX_IN_ESAI1_IPP_IND_HCKR_SELECT_INPUT, + MUX_IN_ESAI1_IPP_IND_HCKT_SELECT_INPUT, + MUX_IN_ESAI1_IPP_IND_SCKR_SELECT_INPUT, + MUX_IN_ESAI1_IPP_IND_SCKT_SELECT_INPUT, /*0x7E0*/ + MUX_IN_ESAI1_IPP_IND_SDO0_SELECT_INPUT, + MUX_IN_ESAI1_IPP_IND_SDO1_SELECT_INPUT, + MUX_IN_ESAI1_IPP_IND_SDO2_SDI3_SELECT_INPUT, + MUX_IN_ESAI1_IPP_IND_SDO3_SDI2_SELECT_INPUT, + MUX_IN_ESAI1_IPP_IND_SDO4_SDI1_SELECT_INPUT, + MUX_IN_ESAI1_IPP_IND_SDO5_SDI0_SELECT_INPUT, + MUX_IN_ESDHC1_IPP_WP_ON_SELECT_INPUT, + MUX_IN_FEC_FEC_COL_SELECT_INPUT, /*0x800*/ + MUX_IN_FEC_FEC_MDI_SELECT_INPUT, + MUX_IN_FEC_FEC_RX_CLK_SELECT_INPUT, + MUX_IN_FIRI_IPP_IND_RXD_SELECT_INPUT, + MUX_IN_GPC_PMIC_RDY_SELECT_INPUT, + MUX_IN_I2C1_IPP_SCL_IN_SELECT_INPUT, + MUX_IN_I2C1_IPP_SDA_IN_SELECT_INPUT, + MUX_IN_I2C2_IPP_SCL_IN_SELECT_INPUT, + MUX_IN_I2C2_IPP_SDA_IN_SELECT_INPUT, + MUX_IN_I2C3_IPP_SCL_IN_SELECT_INPUT, + MUX_IN_I2C3_IPP_SDA_IN_SELECT_INPUT, + MUX_IN_IPU_IPP_DI_0_IND_DISPB_SD_D_SELECT_INPUT, + MUX_IN_IPU_IPP_DI_1_IND_DISPB_SD_D_SELECT_INPUT, + MUX_IN_IPU_IPP_IND_SENS1_DATA_EN_SELECT_INPUT, + MUX_IN_IPU_IPP_IND_SENS1_HSYNC_SELECT_INPUT, + MUX_IN_IPU_IPP_IND_SENS1_VSYNC_SELECT_INPUT, + MUX_IN_KPP_IPP_IND_COL_5_SELECT_INPUT, /*0x840*/ + MUX_IN_KPP_IPP_IND_COL_6_SELECT_INPUT, + MUX_IN_KPP_IPP_IND_COL_7_SELECT_INPUT, + MUX_IN_KPP_IPP_IND_ROW_5_SELECT_INPUT, + MUX_IN_KPP_IPP_IND_ROW_6_SELECT_INPUT, + MUX_IN_KPP_IPP_IND_ROW_7_SELECT_INPUT, + MUX_IN_MLB_MLBCLK_IN_SELECT_INPUT, + MUX_IN_MLB_MLBDAT_IN_SELECT_INPUT, + MUX_IN_MLB_MLBSIG_IN_SELECT_INPUT, + MUX_IN_OWIRE_BATTERY_LINE_IN_SELECT_INPUT, + MUX_IN_SDMA_EVENTS_14_SELECT_INPUT, + MUX_IN_SDMA_EVENTS_15_SELECT_INPUT, + MUX_IN_SPDIF_SPDIF_IN1_SELECT_INPUT, /*0x870*/ + MUX_IN_UART1_IPP_UART_RTS_B_SELECT_INPUT, + MUX_IN_UART1_IPP_UART_RXD_MUX_SELECT_INPUT, + MUX_IN_UART2_IPP_UART_RTS_B_SELECT_INPUT, + MUX_IN_UART2_IPP_UART_RXD_MUX_SELECT_INPUT, + MUX_IN_UART3_IPP_UART_RTS_B_SELECT_INPUT, + MUX_IN_UART3_IPP_UART_RXD_MUX_SELECT_INPUT, + MUX_IN_UART4_IPP_UART_RTS_B_SELECT_INPUT, + MUX_IN_UART4_IPP_UART_RXD_MUX_SELECT_INPUT, + MUX_IN_UART5_IPP_UART_RTS_B_SELECT_INPUT, + MUX_IN_UART5_IPP_UART_RXD_MUX_SELECT_INPUT, + MUX_IN_USBOH3_IPP_IND_OTG_OC_SELECT_INPUT, + MUX_IN_USBOH3_IPP_IND_UH1_OC_SELECT_INPUT, + MUX_IN_USBOH3_IPP_IND_UH2_OC_SELECT_INPUT, +} iomux_input_select_t; + +/*! + * various IOMUX input functions + */ +typedef enum iomux_input_config { + INPUT_CTL_PATH0 = 0x0, + INPUT_CTL_PATH1, + INPUT_CTL_PATH2, + INPUT_CTL_PATH3, + INPUT_CTL_PATH4, + INPUT_CTL_PATH5, + INPUT_CTL_PATH6, + INPUT_CTL_PATH7, +} iomux_input_config_t; + +struct mxc_iomux_pin_cfg { + iomux_pin_name_t pin; + u8 mux_mode; + u16 pad_cfg; + u8 in_select; + u8 in_mode; +}; + +/*! + * Request ownership for an IO pin. This function has to be the first one + * being called before that pin is used. The caller has to check the + * return value to make sure it returns 0. + * + * @param pin a name defined by \b iomux_pin_name_t + * @param config config as defined in \b #iomux_pin_ocfg_t + * + * @return 0 if successful; Non-zero otherwise + */ +int mxc_request_iomux(iomux_pin_name_t pin, iomux_pin_cfg_t config); + +/*! + * Release ownership for an IO pin + * + * @param pin a name defined by \b iomux_pin_name_t + * @param config config as defined in \b #iomux_pin_ocfg_t + */ +void mxc_free_iomux(iomux_pin_name_t pin, iomux_pin_cfg_t config); + +/*! + * This function configures the pad value for a IOMUX pin. + * + * @param pin a pin number as defined in \b #iomux_pin_name_t + * @param config the ORed value of elements defined in + * \b #iomux_pad_config_t + */ +void mxc_iomux_set_pad(iomux_pin_name_t pin, u32 config); + +/*! + * This function gets the current pad value for a IOMUX pin. + * + * @param pin a pin number as defined in \b #iomux_pin_name_t + * @return current pad value + */ +unsigned int mxc_iomux_get_pad(iomux_pin_name_t pin); + +/*! + * This function configures input path. + * + * @param input index of input select register as defined in + * \b #iomux_input_select_t + * @param config the binary value of elements defined in \b #iomux_input_config_t + */ +void mxc_iomux_set_input(iomux_input_select_t input, u32 config); + +#endif /* __MACH_MX53_IOMUX_H__ */ diff --git a/include/asm-arm/arch-mx53/mx53.h b/include/asm-arm/arch-mx53/mx53.h new file mode 100644 index 0000000..e985357 --- /dev/null +++ b/include/asm-arm/arch-mx53/mx53.h @@ -0,0 +1,422 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef __ASM_ARCH_MXC_MX53_H__ +#define __ASM_ARCH_MXC_MX53_H__ + +#define __REG(x) (*((volatile u32 *)(x))) +#define __REG16(x) (*((volatile u16 *)(x))) +#define __REG8(x) (*((volatile u8 *)(x))) + + /* + * IRAM + */ +#define IRAM_BASE_ADDR 0xF8000000 /* internal ram */ +#define IRAM_PARTITIONS 16 +#define IRAM_SIZE (IRAM_PARTITIONS*SZ_8K) /* 128KB */ + +/* + * NFC + */ +#define NFC_BASE_ADDR_AXI 0xF7FF0000 /* NAND flash AXI */ +#define NFC_AXI_SIZE SZ_64K + +#define TZIC_BASE_ADDR 0x0FFFC000 + +#define DEBUG_BASE_ADDR 0x40000000 +#define ETB_BASE_ADDR (DEBUG_BASE_ADDR + 0x00001000) +#define ETM_BASE_ADDR (DEBUG_BASE_ADDR + 0x00002000) +#define TPIU_BASE_ADDR (DEBUG_BASE_ADDR + 0x00003000) +#define CTI0_BASE_ADDR (DEBUG_BASE_ADDR + 0x00004000) +#define CTI1_BASE_ADDR (DEBUG_BASE_ADDR + 0x00005000) +#define CTI2_BASE_ADDR (DEBUG_BASE_ADDR + 0x00006000) +#define CTI3_BASE_ADDR (DEBUG_BASE_ADDR + 0x00007000) +#define CORTEX_DBG_BASE_ADDR (DEBUG_BASE_ADDR + 0x00008000) + +/* + * SPBA global module enabled #0 + */ +#define SPBA0_BASE_ADDR 0x50000000 + +#define MMC_SDHC1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00004000) +#define MMC_SDHC2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00008000) +#define UART3_BASE_ADDR (SPBA0_BASE_ADDR + 0x0000C000) +#define CSPI1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00010000) +#define SSI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00014000) +#define ESAI_BASE_ADDR (SPBA0_BASE_ADDR + 0x00018000) +#define MMC_SDHC3_BASE_ADDR (SPBA0_BASE_ADDR + 0x00020000) +#define MMC_SDHC4_BASE_ADDR (SPBA0_BASE_ADDR + 0x00024000) +#define SPDIF_BASE_ADDR (SPBA0_BASE_ADDR + 0x00028000) +#define ASRC_BASE_ADDR (SPBA0_BASE_ADDR + 0x0002C000) +#define ATA_DMA_BASE_ADDR (SPBA0_BASE_ADDR + 0x00030000) +#define SPBA_CTRL_BASE_ADDR (SPBA0_BASE_ADDR + 0x0003C000) + +/*! + * defines for SPBA modules + */ +#define SPBA_SDHC1 0x04 +#define SPBA_SDHC2 0x08 +#define SPBA_UART3 0x0C +#define SPBA_CSPI1 0x10 +#define SPBA_SSI2 0x14 +#define SPBA_ESAI 0x18 +#define SPBA_SDHC3 0x20 +#define SPBA_SDHC4 0x24 +#define SPBA_SPDIF 0x28 +#define SPBA_ASRC 0x2C +#define SPBA_ATA 0x30 +#define SPBA_CTRL 0x3C + +/* + * AIPS 1 + */ +#define AIPS1_BASE_ADDR 0x53F00000 + +#define OTG_BASE_ADDR (AIPS1_BASE_ADDR + 0x00080000) +#define GPIO1_BASE_ADDR (AIPS1_BASE_ADDR + 0x00084000) +#define GPIO2_BASE_ADDR (AIPS1_BASE_ADDR + 0x00088000) +#define GPIO3_BASE_ADDR (AIPS1_BASE_ADDR + 0x0008C000) +#define GPIO4_BASE_ADDR (AIPS1_BASE_ADDR + 0x00090000) +#define KPP_BASE_ADDR (AIPS1_BASE_ADDR + 0x00094000) +#define WDOG1_BASE_ADDR (AIPS1_BASE_ADDR + 0x00098000) +#define WDOG2_BASE_ADDR (AIPS1_BASE_ADDR + 0x0009C000) +#define GPT1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A0000) +#define SRTC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A4000) +#define IOMUXC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A8000) +#define EPIT1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000AC000) +#define EPIT2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B0000) +#define PWM1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B4000) +#define PWM2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B8000) +#define UART1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000BC000) +#define UART2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000C0000) +#define CAN1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000C8000) +#define CAN2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000CC000) +#define SRC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000D0000) +#define CCM_BASE_ADDR (AIPS1_BASE_ADDR + 0x000D4000) +#define GPC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000D8000) +#define GPIO5_BASE_ADDR (AIPS1_BASE_ADDR + 0x000DC000) +#define GPIO6_BASE_ADDR (AIPS1_BASE_ADDR + 0x000E0000) +#define GPIO7_BASE_ADDR (AIPS1_BASE_ADDR + 0x000E4000) +#define ATA_BASE_ADDR (AIPS1_BASE_ADDR + 0x000E8000) +#define I2C3_BASE_ADDR (AIPS1_BASE_ADDR + 0x000EC000) +#define UART4_BASE_ADDR (AIPS1_BASE_ADDR + 0x000F0000) + +/* + * AIPS 2 + */ +#define AIPS2_BASE_ADDR 0x63F00000 + +#define PLL1_BASE_ADDR (AIPS2_BASE_ADDR + 0x00080000) +#define PLL2_BASE_ADDR (AIPS2_BASE_ADDR + 0x00084000) +#define PLL3_BASE_ADDR (AIPS2_BASE_ADDR + 0x00088000) +#define PLL4_BASE_ADDR (AIPS2_BASE_ADDR + 0x0008C000) +#define UART5_BASE_ADDR (AIPS2_BASE_ADDR + 0x00090000) +#define AHBMAX_BASE_ADDR (AIPS2_BASE_ADDR + 0x00094000) +#define IIM_BASE_ADDR (AIPS2_BASE_ADDR + 0x00098000) +#define CSU_BASE_ADDR (AIPS2_BASE_ADDR + 0x0009C000) +#define ARM_BASE_ADDR (AIPS2_BASE_ADDR + 0x000A0000) +#define OWIRE_BASE_ADDR (AIPS2_BASE_ADDR + 0x000A4000) +#define FIRI_BASE_ADDR (AIPS2_BASE_ADDR + 0x000A8000) +#define CSPI2_BASE_ADDR (AIPS2_BASE_ADDR + 0x000AC000) +#define SDMA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000B0000) +#define SCC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000B4000) +#define ROMCP_BASE_ADDR (AIPS2_BASE_ADDR + 0x000B8000) +#define RTIC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000BC000) +#define CSPI3_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C0000) +#define I2C2_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C4000) +#define I2C1_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C8000) +#define SSI1_BASE_ADDR (AIPS2_BASE_ADDR + 0x000CC000) +#define AUDMUX_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D0000) +#define RTC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D4000) +#define M4IF_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D8000) +#define ESDCTL_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D9000) +#define WEIM_BASE_ADDR (AIPS2_BASE_ADDR + 0x000DA000) +#define NFC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000DB000) +#define EMI_BASE_ADDR (AIPS2_BASE_ADDR + 0x000DBF00) +#define MLB_BASE_ADDR (AIPS2_BASE_ADDR + 0x000E4000) +#define SSI3_BASE_ADDR (AIPS2_BASE_ADDR + 0x000E8000) +#define FEC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000EC000) +#define TVE_BASE_ADDR (AIPS2_BASE_ADDR + 0x000F0000) +#define VPU_BASE_ADDR (AIPS2_BASE_ADDR + 0x000F4000) +#define SAHARA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000F8000) +#define PTP_BASE_ADDR (AIPS2_BASE_ADDR + 0x000FC000) + +/* + * Memory regions and CS + */ +#define CSD0_BASE_ADDR 0x70000000 +#define CSD1_BASE_ADDR 0xB0000000 + +/* + * Interrupt numbers + */ +#define MXC_INT_BASE 0 +#define MXC_INT_RESV0 0 +#define MXC_INT_MMC_SDHC1 1 +#define MXC_INT_MMC_SDHC2 2 +#define MXC_INT_MMC_SDHC3 3 +#define MXC_INT_MMC_SDHC4 4 +#define MXC_INT_DAP 5 +#define MXC_INT_SDMA 6 +#define MXC_INT_IOMUX 7 +#define MXC_INT_NFC 8 +#define MXC_INT_VPU 9 +#define MXC_INT_IPU_ERR 10 +#define MXC_INT_IPU_SYN 11 +#define MXC_INT_GPU 12 +#define MXC_INT_UART4 13 +#define MXC_INT_USB_H1 14 +#define MXC_INT_EMI 15 +#define MXC_INT_USB_H2 16 +#define MXC_INT_USB_H3 17 +#define MXC_INT_USB_OTG 18 +#define MXC_INT_SAHARA_H0 19 +#define MXC_INT_SAHARA_H1 20 +#define MXC_INT_SCC_SMN 21 +#define MXC_INT_SCC_STZ 22 +#define MXC_INT_SCC_SCM 23 +#define MXC_INT_SRTC_NTZ 24 +#define MXC_INT_SRTC_TZ 25 +#define MXC_INT_RTIC 26 +#define MXC_INT_CSU 27 +#define MXC_INT_SATA 28 +#define MXC_INT_SSI1 29 +#define MXC_INT_SSI2 30 +#define MXC_INT_UART1 31 +#define MXC_INT_UART2 32 +#define MXC_INT_UART3 33 +#define MXC_INT_RTC 34 +#define MXC_INT_PTP 35 +#define MXC_INT_CSPI1 36 +#define MXC_INT_CSPI2 37 +#define MXC_INT_CSPI 38 +#define MXC_INT_GPT 39 +#define MXC_INT_EPIT1 40 +#define MXC_INT_EPIT2 41 +#define MXC_INT_GPIO1_INT7 42 +#define MXC_INT_GPIO1_INT6 43 +#define MXC_INT_GPIO1_INT5 44 +#define MXC_INT_GPIO1_INT4 45 +#define MXC_INT_GPIO1_INT3 46 +#define MXC_INT_GPIO1_INT2 47 +#define MXC_INT_GPIO1_INT1 48 +#define MXC_INT_GPIO1_INT0 49 +#define MXC_INT_GPIO1_LOW 50 +#define MXC_INT_GPIO1_HIGH 51 +#define MXC_INT_GPIO2_LOW 52 +#define MXC_INT_GPIO2_HIGH 53 +#define MXC_INT_GPIO3_LOW 54 +#define MXC_INT_GPIO3_HIGH 55 +#define MXC_INT_GPIO4_LOW 56 +#define MXC_INT_GPIO4_HIGH 57 +#define MXC_INT_WDOG1 58 +#define MXC_INT_WDOG2 59 +#define MXC_INT_KPP 60 +#define MXC_INT_PWM1 61 +#define MXC_INT_I2C1 62 +#define MXC_INT_I2C2 63 +#define MXC_INT_I2C3 64 +#define MXC_INT_MLB 65 +#define MXC_INT_ASRC 66 +#define MXC_INT_SPDIF 67 +#define MXC_INT_RESV1 68 +#define MXC_INT_IIM 69 +#define MXC_INT_ATA 70 +#define MXC_INT_CCM1 71 +#define MXC_INT_CCM2 72 +#define MXC_INT_GPC1 73 +#define MXC_INT_GPC2 74 +#define MXC_INT_SRC 75 +#define MXC_INT_NM 76 +#define MXC_INT_PMU 77 +#define MXC_INT_CTI_IRQ 78 +#define MXC_INT_CTI1_TG0 79 +#define MXC_INT_CTI1_TG1 80 +#define MXC_INT_ESAI 81 +#define MXC_INT_CAN1 82 +#define MXC_INT_CAN2 83 +#define MXC_INT_GPU2_IRQ 84 +#define MXC_INT_GPU2_BUSY 85 +#define MXC_INT_UART5 86 +#define MXC_INT_FEC 87 +#define MXC_INT_OWIRE 88 +#define MXC_INT_CTI1_TG2 89 +#define MXC_INT_SJC 90 +#define MXC_INT_RESV2 91 +#define MXC_INT_TVE 92 +#define MXC_INT_FIRI 93 +#define MXC_INT_PWM2 94 +#define MXC_INT_RESV3 95 +#define MXC_INT_SSI3 96 +#define MXC_INT_RESV4 97 +#define MXC_INT_CTI1_TG3 98 +#define MXC_INT_RESV5 99 +#define MXC_INT_VPU_IDLE 100 +#define MXC_INT_EMI_NFC 101 +#define MXC_INT_GPU_IDLE 102 +#define MXC_INT_GPIO5_LOW 103 +#define MXC_INT_GPIO5_HIGH 104 +#define MXC_INT_GPIO6_LOW 105 +#define MXC_INT_GPIO6_HIGH 106 +#define MXC_INT_GPIO7_LOW 107 +#define MXC_INT_GPIO7_HIGH 108 + +/* gpio and gpio based interrupt handling */ +#define GPIO_DR 0x00 +#define GPIO_GDIR 0x04 +#define GPIO_PSR 0x08 +#define GPIO_ICR1 0x0C +#define GPIO_ICR2 0x10 +#define GPIO_IMR 0x14 +#define GPIO_ISR 0x18 +#define GPIO_INT_LOW_LEV 0x0 +#define GPIO_INT_HIGH_LEV 0x1 +#define GPIO_INT_RISE_EDGE 0x2 +#define GPIO_INT_FALL_EDGE 0x3 +#define GPIO_INT_NONE 0x4 + +#define CLKCTL_CCR 0x00 +#define CLKCTL_CCDR 0x04 +#define CLKCTL_CSR 0x08 +#define CLKCTL_CCSR 0x0C +#define CLKCTL_CACRR 0x10 +#define CLKCTL_CBCDR 0x14 +#define CLKCTL_CBCMR 0x18 +#define CLKCTL_CSCMR1 0x1C +#define CLKCTL_CSCMR2 0x20 +#define CLKCTL_CSCDR1 0x24 +#define CLKCTL_CS1CDR 0x28 +#define CLKCTL_CS2CDR 0x2C +#define CLKCTL_CDCDR 0x30 +#define CLKCTL_CHSCDR 0x34 +#define CLKCTL_CSCDR2 0x38 +#define CLKCTL_CSCDR3 0x3C +#define CLKCTL_CSCDR4 0x40 +#define CLKCTL_CWDR 0x44 +#define CLKCTL_CDHIPR 0x48 +#define CLKCTL_CDCR 0x4C +#define CLKCTL_CTOR 0x50 +#define CLKCTL_CLPCR 0x54 +#define CLKCTL_CISR 0x58 +#define CLKCTL_CIMR 0x5C +#define CLKCTL_CCOSR 0x60 +#define CLKCTL_CGPR 0x64 +#define CLKCTL_CCGR0 0x68 +#define CLKCTL_CCGR1 0x6C +#define CLKCTL_CCGR2 0x70 +#define CLKCTL_CCGR3 0x74 +#define CLKCTL_CCGR4 0x78 +#define CLKCTL_CCGR5 0x7C +#define CLKCTL_CCGR6 0x80 +#define CLKCTL_CCGR7 0x84 +#define CLKCTL_CMEOR 0x88 + +#define CHIP_REV_1_0 0x10 +#define PLATFORM_ICGC 0x14 + +/* Assuming 24MHz input clock with doubler ON */ +/* MFI PDF */ +#define DP_OP_850 ((8 << 4) + ((1 - 1) << 0)) +#define DP_MFD_850 (48 - 1) +#define DP_MFN_850 41 + +#define DP_OP_800 ((8 << 4) + ((1 - 1) << 0)) +#define DP_MFD_800 (3 - 1) +#define DP_MFN_800 1 + +#define DP_OP_700 ((7 << 4) + ((1 - 1) << 0)) +#define DP_MFD_700 (24 - 1) +#define DP_MFN_700 7 + +#define DP_OP_600 ((6 << 4) + ((1 - 1) << 0)) +#define DP_MFD_600 (4 - 1) +#define DP_MFN_600 1 + +#define DP_OP_665 ((6 << 4) + ((1 - 1) << 0)) +#define DP_MFD_665 (96 - 1) +#define DP_MFN_665 89 + +#define DP_OP_532 ((5 << 4) + ((1 - 1) << 0)) +#define DP_MFD_532 (24 - 1) +#define DP_MFN_532 13 + +#define DP_OP_400 ((8 << 4) + ((2 - 1) << 0)) +#define DP_MFD_400 (3 - 1) +#define DP_MFN_400 1 + +#define DP_OP_216 ((6 << 4) + ((3 - 1) << 0)) +#define DP_MFD_216 (4 - 1) +#define DP_MFN_216 3 + +#define PLL_DP_CTL 0x00 +#define PLL_DP_CONFIG 0x04 +#define PLL_DP_OP 0x08 +#define PLL_DP_MFD 0x0C +#define PLL_DP_MFN 0x10 +#define PLL_DP_MFNMINUS 0x14 +#define PLL_DP_MFNPLUS 0x18 +#define PLL_DP_HFS_OP 0x1C +#define PLL_DP_HFS_MFD 0x20 +#define PLL_DP_HFS_MFN 0x24 +#define PLL_DP_TOGC 0x28 +#define PLL_DP_DESTAT 0x2C + +#ifndef __ASSEMBLER__ + +enum boot_device { + UNKNOWN_BOOT, + NAND_BOOT, + SPI_NOR_BOOT, + MMC_BOOT, +}; + +enum mxc_clock { + MXC_ARM_CLK = 0, + MXC_AHB_CLK, + MXC_IPG_CLK, + MXC_IPG_PERCLK, + MXC_UART_CLK, + MXC_CSPI_CLK, + MXC_AXI_A_CLK, + MXC_AXI_B_CLK, + MXC_EMI_SLOW_CLK, + MXC_DDR_CLK, + MXC_ESDHC_CLK, +}; + +enum mxc_peri_clocks { + MXC_UART1_BAUD, + MXC_UART2_BAUD, + MXC_UART3_BAUD, + MXC_SSI1_BAUD, + MXC_SSI2_BAUD, + MXC_CSI_BAUD, + MXC_MSTICK1_CLK, + MXC_MSTICK2_CLK, + MXC_SPI1_CLK, + MXC_SPI2_CLK, +}; + +extern unsigned int mxc_get_clock(enum mxc_clock clk); +extern unsigned int get_board_rev(void); +extern int is_soc_rev(int rev); +extern enum boot_device get_boot_device(void); + +#endif /* __ASSEMBLER__*/ + +#endif /* __ASM_ARCH_MXC_MX53_H__ */ diff --git a/include/asm-arm/arch-mx53/mx53_pins.h b/include/asm-arm/arch-mx53/mx53_pins.h new file mode 100644 index 0000000..e5afcd7 --- /dev/null +++ b/include/asm-arm/arch-mx53/mx53_pins.h @@ -0,0 +1,374 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ +#ifndef __ASM_ARCH_MXC_MX53_PINS_H__ +#define __ASM_ARCH_MXC_MX53_PINS_H__ + +/*! + * @file arch-mxc/mx53_pins.h + * + * @brief MX53 I/O Pin List + * + * @ingroup GPIO_MX53 + */ + +#ifndef __ASSEMBLY__ + +/*! + * @name IOMUX/PAD Bit field definitions + */ + +/*! @{ */ + +/*! + * In order to identify pins more effectively, each mux-controlled pin's + * enumerated value is constructed in the following way: + * + * ------------------------------------------------------------------- + * 31-29 | 28 - 24 | 23 - 21 | 20 - 10| 9 - 0 + * ------------------------------------------------------------------- + * IO_P | IO_I | GPIO_I | PAD_I | MUX_I + * ------------------------------------------------------------------- + * + * Bit 0 to 9 contains MUX_I used to identify the register + * offset (0-based. base is IOMUX_module_base) defined in the Section + * "sw_pad_ctl & sw_mux_ctl details" of the IC Spec. The + * similar field definitions are used for the pad control register. + * For example, the MX53_PIN_GPIO_19 is defined in the enumeration: + * ( (0x20 - MUX_I_START) << MUX_I)|( (0x348 - PAD_I_START) << PAD_I) + * It means the mux control register is at register offset 0x20. The pad control + * register offset is: 0x348 and also occupy the least significant bits + * within the register. + */ + +/*! + * Starting bit position within each entry of \b iomux_pins to represent the + * MUX control register offset + */ +#define MUX_I 0 +/*! + * Starting bit position within each entry of \b iomux_pins to represent the + * PAD control register offset + */ +#define PAD_I 10 +/*! + * Starting bit position within each entry of \b iomux_pins to represent which + * mux mode is for GPIO (0-based) + */ +#define GPIO_I 21 + +#define MUX_IO_P 29 +#define MUX_IO_I 24 + +#define NON_GPIO_PORT 0x7 +#define PIN_TO_MUX_MASK ((1 << (PAD_I - MUX_I)) - 1) +#define PIN_TO_PAD_MASK ((1 << (GPIO_I - PAD_I)) - 1) +#define PIN_TO_ALT_GPIO_MASK ((1 << (MUX_IO_I - GPIO_I)) - 1) + +#define NON_MUX_I PIN_TO_MUX_MASK +#define NON_PAD_I PIN_TO_PAD_MASK +#define MUX_I_START 0x0020 +#define PAD_I_START 0x348 +#define INPUT_CTL_START 0x730 +#define MUX_I_END (PAD_I_START - 4) + +#define _MXC_BUILD_PIN(gp, gi, ga, mi, pi) \ + (((gp) << MUX_IO_P) | ((gi) << MUX_IO_I) | \ + ((mi) << MUX_I) | \ + ((pi - PAD_I_START) << PAD_I) | \ + ((ga) << GPIO_I)) + +#define _MXC_BUILD_GPIO_PIN(gp, gi, ga, mi, pi) \ + _MXC_BUILD_PIN(gp, gi, ga, mi, pi) + +#define _MXC_BUILD_NON_GPIO_PIN(mi, pi) \ + _MXC_BUILD_PIN(NON_GPIO_PORT, 0, 0, mi, pi) + +#define PIN_TO_IOMUX_MUX(pin) ((pin >> MUX_I) & PIN_TO_MUX_MASK) +#define PIN_TO_IOMUX_PAD(pin) ((pin >> PAD_I) & PIN_TO_PAD_MASK) +#define PIN_TO_ALT_GPIO(pin) ((pin >> GPIO_I) & PIN_TO_ALT_GPIO_MASK) +#define PIN_TO_IOMUX_INDEX(pin) (PIN_TO_IOMUX_MUX(pin) >> 2) + +/*! @} End IOMUX/PAD Bit field definitions */ + +/*! + * This enumeration is constructed based on the Section + * "sw_pad_ctl & sw_mux_ctl details" of the MX53 IC Spec. Each enumerated + * value is constructed based on the rules described above. + */ +enum iomux_pins { + MX53_PIN_GPIO_19 = _MXC_BUILD_GPIO_PIN(3, 5, 1, 0x20, 0x348), + MX53_PIN_KEY_COL0 = _MXC_BUILD_GPIO_PIN(3, 6, 1, 0x24, 0x34C), + MX53_PIN_KEY_ROW0 = _MXC_BUILD_GPIO_PIN(3, 7, 1, 0x28, 0x350), + MX53_PIN_KEY_COL1 = _MXC_BUILD_GPIO_PIN(3, 8, 1, 0x2C, 0x354), + MX53_PIN_KEY_ROW1 = _MXC_BUILD_GPIO_PIN(3, 9, 1, 0x30, 0x358), + MX53_PIN_KEY_COL2 = _MXC_BUILD_GPIO_PIN(3, 10, 1, 0x34, 0x35C), + MX53_PIN_KEY_ROW2 = _MXC_BUILD_GPIO_PIN(3, 11, 1, 0x38, 0x360), + MX53_PIN_KEY_COL3 = _MXC_BUILD_GPIO_PIN(3, 12, 1, 0x3C, 0x364), + MX53_PIN_KEY_ROW3 = _MXC_BUILD_GPIO_PIN(3, 13, 1, 0x40, 0x368), + MX53_PIN_KEY_COL4 = _MXC_BUILD_GPIO_PIN(3, 14, 1, 0x44, 0x36C), + MX53_PIN_KEY_ROW4 = _MXC_BUILD_GPIO_PIN(3, 15, 1, 0x48, 0x370), + MX53_PIN_NVCC_KEYPAD = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x374), + MX53_PIN_DI0_DISP_CLK = _MXC_BUILD_GPIO_PIN(3, 16, 1, 0x4C, 0x378), + MX53_PIN_DI0_PIN15 = _MXC_BUILD_GPIO_PIN(3, 17, 1, 0x50, 0x37C), + MX53_PIN_DI0_PIN2 = _MXC_BUILD_GPIO_PIN(3, 18, 1, 0x54, 0x380), + MX53_PIN_DI0_PIN3 = _MXC_BUILD_GPIO_PIN(3, 19, 1, 0x58, 0x384), + MX53_PIN_DI0_PIN4 = _MXC_BUILD_GPIO_PIN(3, 20, 1, 0x5C, 0x388), + MX53_PIN_DISP0_DAT0 = _MXC_BUILD_GPIO_PIN(3, 21, 1, 0x60, 0x38C), + MX53_PIN_DISP0_DAT1 = _MXC_BUILD_GPIO_PIN(3, 22, 1, 0x64, 0x390), + MX53_PIN_DISP0_DAT2 = _MXC_BUILD_GPIO_PIN(3, 23, 1, 0x68, 0x394), + MX53_PIN_DISP0_DAT3 = _MXC_BUILD_GPIO_PIN(3, 24, 1, 0x6C, 0x398), + MX53_PIN_DISP0_DAT4 = _MXC_BUILD_GPIO_PIN(3, 25, 1, 0x70, 0x39C), + MX53_PIN_DISP0_DAT5 = _MXC_BUILD_GPIO_PIN(3, 26, 1, 0x74, 0x3A0), + MX53_PIN_DISP0_DAT6 = _MXC_BUILD_GPIO_PIN(3, 27, 1, 0x78, 0x3A4), + MX53_PIN_DISP0_DAT7 = _MXC_BUILD_GPIO_PIN(3, 28, 1, 0x7C, 0x3A8), + MX53_PIN_DISP0_DAT8 = _MXC_BUILD_GPIO_PIN(3, 29, 1, 0x80, 0x3AC), + MX53_PIN_DISP0_DAT9 = _MXC_BUILD_GPIO_PIN(3, 30, 1, 0x84, 0x3B0), + MX53_PIN_DISP0_DAT10 = _MXC_BUILD_GPIO_PIN(3, 31, 1, 0x88, 0x3B4), + MX53_PIN_DISP0_DAT11 = _MXC_BUILD_GPIO_PIN(4, 5, 1, 0x8C, 0x3B8), + MX53_PIN_DISP0_DAT12 = _MXC_BUILD_GPIO_PIN(4, 6, 1, 0x90, 0x3BC), + MX53_PIN_DISP0_DAT13 = _MXC_BUILD_GPIO_PIN(4, 7, 1, 0x94, 0x3C0), + MX53_PIN_DISP0_DAT14 = _MXC_BUILD_GPIO_PIN(4, 8, 1, 0x98, 0x3C4), + MX53_PIN_DISP0_DAT15 = _MXC_BUILD_GPIO_PIN(4, 9, 1, 0x9C, 0x3C8), + MX53_PIN_DISP0_DAT16 = _MXC_BUILD_GPIO_PIN(4, 10, 1, 0xA0, 0x3CC), + MX53_PIN_DISP0_DAT17 = _MXC_BUILD_GPIO_PIN(4, 11, 1, 0xA4, 0x3D0), + MX53_PIN_DISP0_DAT18 = _MXC_BUILD_GPIO_PIN(4, 12, 1, 0xA8, 0x3D4), + MX53_PIN_DISP0_DAT19 = _MXC_BUILD_GPIO_PIN(4, 13, 1, 0xAC, 0x3D8), + MX53_PIN_DISP0_DAT20 = _MXC_BUILD_GPIO_PIN(4, 14, 1, 0xB0, 0x3DC), + MX53_PIN_DISP0_DAT21 = _MXC_BUILD_GPIO_PIN(4, 15, 1, 0xB4, 0x3E0), + MX53_PIN_DISP0_DAT22 = _MXC_BUILD_GPIO_PIN(4, 16, 1, 0xB8, 0x3E4), + MX53_PIN_DISP0_DAT23 = _MXC_BUILD_GPIO_PIN(4, 17, 1, 0xBC, 0x3E8), + MX53_PIN_CSI0_PIXCLK = _MXC_BUILD_GPIO_PIN(4, 18, 1, 0xC0, 0x3EC), + MX53_PIN_CSI0_MCLK = _MXC_BUILD_GPIO_PIN(4, 19, 1, 0xC4, 0x3F0), + MX53_PIN_CSI0_DATA_EN = _MXC_BUILD_GPIO_PIN(4, 20, 1, 0xC8, 0x3F4), + MX53_PIN_CSI0_VSYNC = _MXC_BUILD_GPIO_PIN(4, 21, 1, 0xCC, 0x3F8), + MX53_PIN_CSI0_D4 = _MXC_BUILD_GPIO_PIN(4, 22, 1, 0xD0, 0x3FC), + MX53_PIN_CSI0_D5 = _MXC_BUILD_GPIO_PIN(4, 23, 1, 0xD4, 0x400), + MX53_PIN_CSI0_D6 = _MXC_BUILD_GPIO_PIN(4, 24, 1, 0xD8, 0x404), + MX53_PIN_CSI0_D7 = _MXC_BUILD_GPIO_PIN(4, 25, 1, 0xDC, 0x408), + MX53_PIN_CSI0_D8 = _MXC_BUILD_GPIO_PIN(4, 26, 1, 0xE0, 0x40C), + MX53_PIN_CSI0_D9 = _MXC_BUILD_GPIO_PIN(4, 27, 1, 0xE4, 0x410), + MX53_PIN_CSI0_D10 = _MXC_BUILD_GPIO_PIN(4, 28, 1, 0xE8, 0x414), + MX53_PIN_CSI0_D11 = _MXC_BUILD_GPIO_PIN(4, 29, 1, 0xEC, 0x418), + MX53_PIN_CSI0_D12 = _MXC_BUILD_GPIO_PIN(4, 30, 1, 0xF0, 0x41C), + MX53_PIN_CSI0_D13 = _MXC_BUILD_GPIO_PIN(4, 31, 1, 0xF4, 0x420), + MX53_PIN_CSI0_D14 = _MXC_BUILD_GPIO_PIN(5, 0, 1, 0xF8, 0x424), + MX53_PIN_CSI0_D15 = _MXC_BUILD_GPIO_PIN(5, 1, 1, 0xFC, 0x428), + MX53_PIN_CSI0_D16 = _MXC_BUILD_GPIO_PIN(5, 2, 1, 0x100, 0x42C), + MX53_PIN_CSI0_D17 = _MXC_BUILD_GPIO_PIN(5, 3, 1, 0x104, 0x430), + MX53_PIN_CSI0_D18 = _MXC_BUILD_GPIO_PIN(5, 4, 1, 0x108, 0x434), + MX53_PIN_CSI0_D19 = _MXC_BUILD_GPIO_PIN(5, 5, 1, 0x10C, 0x438), + MX53_PIN_NVCC_CSI0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x43C), + MX53_PIN_JTAG_TMS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x440), + MX53_PIN_JTAG_MOD = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x444), + MX53_PIN_JTAG_TRSTB = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x448), + MX53_PIN_JTAG_TDI = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x44C), + MX53_PIN_JTAG_TCK = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x450), + MX53_PIN_JTAG_TDO = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x454), + MX53_PIN_EIM_A25 = _MXC_BUILD_GPIO_PIN(4, 2, 1, 0x110, 0x458), + MX53_PIN_EIM_EB2 = _MXC_BUILD_GPIO_PIN(1, 30, 1, 0x114, 0x45C), + MX53_PIN_EIM_D16 = _MXC_BUILD_GPIO_PIN(2, 16, 1, 0x118, 0x460), + MX53_PIN_EIM_D17 = _MXC_BUILD_GPIO_PIN(2, 17, 1, 0x11C, 0x464), + MX53_PIN_EIM_D18 = _MXC_BUILD_GPIO_PIN(2, 18, 1, 0x120, 0x468), + MX53_PIN_EIM_D19 = _MXC_BUILD_GPIO_PIN(2, 19, 1, 0x124, 0x46C), + MX53_PIN_EIM_D20 = _MXC_BUILD_GPIO_PIN(2, 20, 1, 0x128, 0x470), + MX53_PIN_EIM_D21 = _MXC_BUILD_GPIO_PIN(2, 21, 1, 0x12C, 0x474), + MX53_PIN_EIM_D22 = _MXC_BUILD_GPIO_PIN(2, 22, 1, 0x130, 0x478), + MX53_PIN_EIM_D23 = _MXC_BUILD_GPIO_PIN(2, 23, 1, 0x134, 0x47C), + MX53_PIN_EIM_EB3 = _MXC_BUILD_GPIO_PIN(1, 31, 1, 0x138, 0x480), + MX53_PIN_EIM_D24 = _MXC_BUILD_GPIO_PIN(2, 24, 1, 0x13C, 0x484), + MX53_PIN_EIM_D25 = _MXC_BUILD_GPIO_PIN(2, 25, 1, 0x140, 0x488), + MX53_PIN_EIM_D26 = _MXC_BUILD_GPIO_PIN(2, 26, 1, 0x144, 0x48C), + MX53_PIN_EIM_D27 = _MXC_BUILD_GPIO_PIN(2, 27, 1, 0x148, 0x490), + MX53_PIN_EIM_D28 = _MXC_BUILD_GPIO_PIN(2, 28, 1, 0x14C, 0x494), + MX53_PIN_EIM_D29 = _MXC_BUILD_GPIO_PIN(2, 29, 1, 0x150, 0x498), + MX53_PIN_EIM_D30 = _MXC_BUILD_GPIO_PIN(2, 30, 1, 0x154, 0x49C), + MX53_PIN_EIM_D31 = _MXC_BUILD_GPIO_PIN(2, 31, 1, 0x158, 0x4A0), + MX53_PIN_NVCC_EIM1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x4A4), + MX53_PIN_EIM_A24 = _MXC_BUILD_GPIO_PIN(4, 4, 1, 0x15C, 0x4A8), + MX53_PIN_EIM_A23 = _MXC_BUILD_GPIO_PIN(5, 6, 1, 0x160, 0x4AC), + MX53_PIN_EIM_A22 = _MXC_BUILD_GPIO_PIN(1, 16, 1, 0x164, 0x4B0), + MX53_PIN_EIM_A21 = _MXC_BUILD_GPIO_PIN(1, 17, 1, 0x168, 0x4B4), + MX53_PIN_EIM_A20 = _MXC_BUILD_GPIO_PIN(1, 18, 1, 0x16C, 0x4B8), + MX53_PIN_EIM_A19 = _MXC_BUILD_GPIO_PIN(1, 19, 1, 0x170, 0x4BC), + MX53_PIN_EIM_A18 = _MXC_BUILD_GPIO_PIN(1, 20, 1, 0x174, 0x4C0), + MX53_PIN_EIM_A17 = _MXC_BUILD_GPIO_PIN(1, 21, 1, 0x178, 0x4C4), + MX53_PIN_EIM_A16 = _MXC_BUILD_GPIO_PIN(1, 22, 1, 0x17C, 0x4C8), + MX53_PIN_EIM_CS0 = _MXC_BUILD_GPIO_PIN(1, 23, 1, 0x180, 0x4CC), + MX53_PIN_EIM_CS1 = _MXC_BUILD_GPIO_PIN(1, 24, 1, 0x184, 0x4D0), + MX53_PIN_EIM_OE = _MXC_BUILD_GPIO_PIN(1, 25, 1, 0x188, 0x4D4), + MX53_PIN_EIM_RW = _MXC_BUILD_GPIO_PIN(1, 26, 1, 0x18C, 0x4D8), + MX53_PIN_EIM_LBA = _MXC_BUILD_GPIO_PIN(1, 27, 1, 0x190, 0x4DC), + MX53_PIN_NVCC_EIM4 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x4E0), + MX53_PIN_EIM_EB0 = _MXC_BUILD_GPIO_PIN(1, 28, 1, 0x194, 0x4E4), + MX53_PIN_EIM_EB1 = _MXC_BUILD_GPIO_PIN(1, 29, 1, 0x198, 0x4E8), + MX53_PIN_EIM_DA0 = _MXC_BUILD_GPIO_PIN(2, 0, 1, 0x19C, 0x4EC), + MX53_PIN_EIM_DA1 = _MXC_BUILD_GPIO_PIN(2, 1, 1, 0x1A0, 0x4F0), + MX53_PIN_EIM_DA2 = _MXC_BUILD_GPIO_PIN(2, 2, 1, 0x1A4, 0x4F4), + MX53_PIN_EIM_DA3 = _MXC_BUILD_GPIO_PIN(2, 3, 1, 0x1A8, 0x4F8), + MX53_PIN_EIM_DA4 = _MXC_BUILD_GPIO_PIN(2, 4, 1, 0x1AC, 0x4FC), + MX53_PIN_EIM_DA5 = _MXC_BUILD_GPIO_PIN(2, 5, 1, 0x1B0, 0x500), + MX53_PIN_EIM_DA6 = _MXC_BUILD_GPIO_PIN(2, 6, 1, 0x1B4, 0x504), + MX53_PIN_EIM_DA7 = _MXC_BUILD_GPIO_PIN(2, 7, 1, 0x1B8, 0x508), + MX53_PIN_EIM_DA8 = _MXC_BUILD_GPIO_PIN(2, 8, 1, 0x1BC, 0x50C), + MX53_PIN_EIM_DA9 = _MXC_BUILD_GPIO_PIN(2, 9, 1, 0x1C0, 0x510), + MX53_PIN_EIM_DA10 = _MXC_BUILD_GPIO_PIN(2, 10, 1, 0x1C4, 0x514), + MX53_PIN_EIM_DA11 = _MXC_BUILD_GPIO_PIN(2, 11, 1, 0x1C8, 0x518), + MX53_PIN_EIM_DA12 = _MXC_BUILD_GPIO_PIN(2, 12, 1, 0x1CC, 0x51C), + MX53_PIN_EIM_DA13 = _MXC_BUILD_GPIO_PIN(2, 13, 1, 0x1D0, 0x520), + MX53_PIN_EIM_DA14 = _MXC_BUILD_GPIO_PIN(2, 14, 1, 0x1D4, 0x524), + MX53_PIN_EIM_DA15 = _MXC_BUILD_GPIO_PIN(2, 15, 1, 0x1D8, 0x528), + MX53_PIN_NANDF_WE_B = _MXC_BUILD_GPIO_PIN(5, 12, 1, 0x1DC, 0x52C), + MX53_PIN_NANDF_RE_B = _MXC_BUILD_GPIO_PIN(5, 13, 1, 0x1E0, 0x530), + MX53_PIN_EIM_WAIT = _MXC_BUILD_GPIO_PIN(4, 0, 1, 0x1E4, 0x534), + MX53_PIN_EIM_BCLK = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x538), + MX53_PIN_NVCC_EIM7 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x53C), + MX53_PIN_LVDS1_TX3_P = _MXC_BUILD_GPIO_PIN(5, 22, 0, 0x1EC, NON_PAD_I), + MX53_PIN_LVDS1_TX2_P = _MXC_BUILD_GPIO_PIN(5, 24, 0, 0x1F0, NON_PAD_I), + MX53_PIN_LVDS1_CLK_P = _MXC_BUILD_GPIO_PIN(5, 26, 0, 0x1F4, NON_PAD_I), + MX53_PIN_LVDS1_TX1_P = _MXC_BUILD_GPIO_PIN(5, 28, 0, 0x1F8, NON_PAD_I), + MX53_PIN_LVDS1_TX0_P = _MXC_BUILD_GPIO_PIN(5, 30, 0, 0x1FC, NON_PAD_I), + MX53_PIN_LVDS0_TX3_P = _MXC_BUILD_GPIO_PIN(6, 22, 0, 0x200, NON_PAD_I), + MX53_PIN_LVDS0_CLK_P = _MXC_BUILD_GPIO_PIN(6, 24, 0, 0x204, NON_PAD_I), + MX53_PIN_LVDS0_TX2_P = _MXC_BUILD_GPIO_PIN(6, 26, 0, 0x208, NON_PAD_I), + MX53_PIN_LVDS0_TX1_P = _MXC_BUILD_GPIO_PIN(6, 28, 0, 0x20C, NON_PAD_I), + MX53_PIN_LVDS0_TX0_P = _MXC_BUILD_GPIO_PIN(6, 30, 0, 0x210, NON_PAD_I), + MX53_PIN_GPIO_10 = _MXC_BUILD_GPIO_PIN(3, 0, 0, 0x214, 0x540), + MX53_PIN_GPIO_11 = _MXC_BUILD_GPIO_PIN(3, 1, 0, 0x218, 0x544), + MX53_PIN_GPIO_12 = _MXC_BUILD_GPIO_PIN(3, 2, 0, 0x21C, 0x548), + MX53_PIN_GPIO_13 = _MXC_BUILD_GPIO_PIN(3, 3, 0, 0x220, 0x54C), + MX53_PIN_GPIO_14 = _MXC_BUILD_GPIO_PIN(3, 4, 0, 0x224, 0x550), + MX53_PIN_DRAM_DQM3 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x554), + MX53_PIN_DRAM_SDQS3 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x558), + MX53_PIN_DRAM_SDCKE1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x55C), + MX53_PIN_DRAM_DQM2 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x560), + MX53_PIN_DRAM_SDODT1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x564), + MX53_PIN_DRAM_SDQS2 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x568), + MX53_PIN_DRAM_RESET = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x56C), + MX53_PIN_DRAM_SDCLK1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x570), + MX53_PIN_DRAM_CAS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x574), + MX53_PIN_DRAM_SDCLK0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x578), + MX53_PIN_DRAM_SDQS0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x57C), + MX53_PIN_DRAM_SDODT0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x580), + MX53_PIN_DRAM_DQM0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x584), + MX53_PIN_DRAM_RAS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x588), + MX53_PIN_DRAM_SDCKE0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x58C), + MX53_PIN_DRAM_SDQS1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x590), + MX53_PIN_DRAM_DQM1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x594), + MX53_PIN_PMIC_ON_REQ = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x598), + MX53_PIN_PMIC_STBY_REQ = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x59C), + MX53_PIN_NANDF_CLE = _MXC_BUILD_GPIO_PIN(5, 7, 1, 0x228, 0x5A0), + MX53_PIN_NANDF_ALE = _MXC_BUILD_GPIO_PIN(5, 8 , 1, 0x22C, 0x5A4), + MX53_PIN_NANDF_WP_B = _MXC_BUILD_GPIO_PIN(5, 9, 1, 0x230, 0x5A8), + MX53_PIN_NANDF_RB0 = _MXC_BUILD_GPIO_PIN(5, 10, 1, 0x234, 0x5AC), + MX53_PIN_NANDF_CS0 = _MXC_BUILD_GPIO_PIN(5, 11, 1, 0x238, 0x5B0), + MX53_PIN_NANDF_CS1 = _MXC_BUILD_GPIO_PIN(5, 14, 1, 0x23C, 0x5B4), + MX53_PIN_NANDF_CS2 = _MXC_BUILD_GPIO_PIN(5, 15, 1, 0x240, 0x5B8), + MX53_PIN_NANDF_CS3 = _MXC_BUILD_GPIO_PIN(5, 16, 1, 0x244, 0x5BC), + MX53_PIN_NVCC_NANDF = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x5C0), + MX53_PIN_FEC_MDIO = _MXC_BUILD_GPIO_PIN(0, 22, 1, 0x248, 0x5C4), + MX53_PIN_FEC_REF_CLK = _MXC_BUILD_GPIO_PIN(0, 23, 1, 0x24C, 0x5C8), + MX53_PIN_FEC_RX_ER = _MXC_BUILD_GPIO_PIN(0, 24, 1, 0x250, 0x5CC), + MX53_PIN_FEC_CRS_DV = _MXC_BUILD_GPIO_PIN(0, 25, 1, 0x254, 0x5D0), + MX53_PIN_FEC_RXD1 = _MXC_BUILD_GPIO_PIN(0, 26, 1, 0x258, 0x5D4), + MX53_PIN_FEC_RXD0 = _MXC_BUILD_GPIO_PIN(0, 27, 1, 0x25C, 0x5D8), + MX53_PIN_FEC_TX_EN = _MXC_BUILD_GPIO_PIN(0, 28, 1, 0x260, 0x5DC), + MX53_PIN_FEC_TXD1 = _MXC_BUILD_GPIO_PIN(0, 29, 1, 0x264, 0x5E0), + MX53_PIN_FEC_TXD0 = _MXC_BUILD_GPIO_PIN(0, 30, 1, 0x268, 0x5E4), + MX53_PIN_FEC_MDC = _MXC_BUILD_GPIO_PIN(0, 31, 1, 0x26C, 0x5E8), + MX53_PIN_NVCC_FEC = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x5EC), + MX53_PIN_ATA_DIOW = _MXC_BUILD_GPIO_PIN(5, 17, 1, 0x270, 0x5F0), + MX53_PIN_ATA_DMACK = _MXC_BUILD_GPIO_PIN(5, 18, 1, 0x274, 0x5F4), + MX53_PIN_ATA_DMARQ = _MXC_BUILD_GPIO_PIN(6, 0, 1, 0x278, 0x5F8), + MX53_PIN_ATA_BUFFER_EN = _MXC_BUILD_GPIO_PIN(6, 1, 1, 0x27C, 0x5FC), + MX53_PIN_ATA_INTRQ = _MXC_BUILD_GPIO_PIN(6, 2, 1, 0x280, 0x600), + MX53_PIN_ATA_DIOR = _MXC_BUILD_GPIO_PIN(6, 3, 1, 0x284, 0x604), + MX53_PIN_ATA_RESET_B = _MXC_BUILD_GPIO_PIN(6, 4, 1, 0x288, 0x608), + MX53_PIN_ATA_IORDY = _MXC_BUILD_GPIO_PIN(6, 5, 1, 0x28C, 0x60C), + MX53_PIN_ATA_DA_0 = _MXC_BUILD_GPIO_PIN(6, 6, 1, 0x290, 0x610), + MX53_PIN_ATA_DA_1 = _MXC_BUILD_GPIO_PIN(6, 7, 1, 0x294, 0x614), + MX53_PIN_ATA_DA_2 = _MXC_BUILD_GPIO_PIN(6, 8, 1, 0x298, 0x618), + MX53_PIN_ATA_CS_0 = _MXC_BUILD_GPIO_PIN(6, 9, 1, 0x29C, 0x61C), + MX53_PIN_ATA_CS_1 = _MXC_BUILD_GPIO_PIN(6, 10, 1, 0x2A0, 0x620), + MX53_PIN_NVCC_ATA2 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x624), + MX53_PIN_ATA_DATA0 = _MXC_BUILD_GPIO_PIN(1, 0, 1, 0x2A4, 0x628), + MX53_PIN_ATA_DATA1 = _MXC_BUILD_GPIO_PIN(1, 1, 1, 0x2A8, 0x62C), + MX53_PIN_ATA_DATA2 = _MXC_BUILD_GPIO_PIN(1, 2, 1, 0x2AC, 0x630), + MX53_PIN_ATA_DATA3 = _MXC_BUILD_GPIO_PIN(1, 3, 1, 0x2B0, 0x634), + MX53_PIN_ATA_DATA4 = _MXC_BUILD_GPIO_PIN(1, 4, 1, 0x2B4, 0x638), + MX53_PIN_ATA_DATA5 = _MXC_BUILD_GPIO_PIN(1, 5, 1, 0x2B8, 0x63C), + MX53_PIN_ATA_DATA6 = _MXC_BUILD_GPIO_PIN(1, 6, 1, 0x2BC, 0x640), + MX53_PIN_ATA_DATA7 = _MXC_BUILD_GPIO_PIN(1, 7, 1, 0x2C0, 0x644), + MX53_PIN_ATA_DATA8 = _MXC_BUILD_GPIO_PIN(1, 8, 1, 0x2C4, 0x648), + MX53_PIN_ATA_DATA9 = _MXC_BUILD_GPIO_PIN(1, 9, 1, 0x2C8, 0x64C), + MX53_PIN_ATA_DATA10 = _MXC_BUILD_GPIO_PIN(1, 10, 1, 0x2CC, 0x650), + MX53_PIN_ATA_DATA11 = _MXC_BUILD_GPIO_PIN(1, 11, 1, 0x2D0, 0x654), + MX53_PIN_ATA_DATA12 = _MXC_BUILD_GPIO_PIN(1, 12, 1, 0x2D4, 0x658), + MX53_PIN_ATA_DATA13 = _MXC_BUILD_GPIO_PIN(1, 13, 1, 0x2D8, 0x65C), + MX53_PIN_ATA_DATA14 = _MXC_BUILD_GPIO_PIN(1, 14, 1, 0x2DC, 0x660), + MX53_PIN_ATA_DATA15 = _MXC_BUILD_GPIO_PIN(1, 15, 1, 0x2E0, 0x664), + MX53_PIN_NVCC_ATA0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x668), + MX53_PIN_SD1_DATA0 = _MXC_BUILD_GPIO_PIN(0, 16, 1, 0x2E4, 0x66C), + MX53_PIN_SD1_DATA1 = _MXC_BUILD_GPIO_PIN(0, 17, 1, 0x2E8, 0x670), + MX53_PIN_SD1_CMD = _MXC_BUILD_GPIO_PIN(0, 18, 1, 0x2EC, 0x674), + MX53_PIN_SD1_DATA2 = _MXC_BUILD_GPIO_PIN(0, 19, 1, 0x2F0, 0x678), + MX53_PIN_SD1_CLK = _MXC_BUILD_GPIO_PIN(0, 20, 1, 0x2F4, 0x67C), + MX53_PIN_SD1_DATA3 = _MXC_BUILD_GPIO_PIN(0, 21, 1, 0x2F8, 0x680), + MX53_PIN_NVCC_SD1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x684), + MX53_PIN_SD2_CLK = _MXC_BUILD_GPIO_PIN(0, 10, 1, 0x2FC, 0x688), + MX53_PIN_SD2_CMD = _MXC_BUILD_GPIO_PIN(0, 11, 1, 0x300, 0x68C), + MX53_PIN_SD2_DATA3 = _MXC_BUILD_GPIO_PIN(0, 12, 1, 0x304, 0x690), + MX53_PIN_SD2_DATA2 = _MXC_BUILD_GPIO_PIN(0, 13, 1, 0x308, 0x694), + MX53_PIN_SD2_DATA1 = _MXC_BUILD_GPIO_PIN(0, 14, 1, 0x30C, 0x698), + MX53_PIN_SD2_DATA0 = _MXC_BUILD_GPIO_PIN(0, 15, 1, 0x310, 0x69C), + MX53_PIN_NVCC_SD2 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6A0), + MX53_PIN_GPIO_0 = _MXC_BUILD_GPIO_PIN(0, 0, 1, 0x314, 0x6A4), + MX53_PIN_GPIO_1 = _MXC_BUILD_GPIO_PIN(0, 1, 1, 0x318, 0x6A8), + MX53_PIN_GPIO_9 = _MXC_BUILD_GPIO_PIN(0, 9, 1, 0x31C, 0x6AC), + MX53_PIN_GPIO_3 = _MXC_BUILD_GPIO_PIN(0, 3, 1, 0x320, 0x6B0), + MX53_PIN_GPIO_6 = _MXC_BUILD_GPIO_PIN(0, 6, 1, 0x324, 0x6B4), + MX53_PIN_GPIO_2 = _MXC_BUILD_GPIO_PIN(0, 2, 1, 0x328, 0x6B8), + MX53_PIN_GPIO_4 = _MXC_BUILD_GPIO_PIN(0, 4, 1, 0x32C, 0x6BC), + MX53_PIN_GPIO_5 = _MXC_BUILD_GPIO_PIN(0, 5, 1, 0x330, 0x6C0), + MX53_PIN_GPIO_7 = _MXC_BUILD_GPIO_PIN(0, 7, 1, 0x334, 0x6C4), + MX53_PIN_GPIO_8 = _MXC_BUILD_GPIO_PIN(0, 8, 1, 0x338, 0x6C8), + MX53_PIN_GPIO_16 = _MXC_BUILD_GPIO_PIN(6, 11, 1, 0x33C, 0x6CC), + MX53_PIN_GPIO_17 = _MXC_BUILD_GPIO_PIN(6, 12, 1, 0x340, 0x6D0), + MX53_PIN_GPIO_18 = _MXC_BUILD_GPIO_PIN(6, 13, 1, 0x344, 0x6D4), + MX53_PIN_NVCC_GPIO = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6D8), + MX53_PIN_POR_B = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6DC), + MX53_PIN_BOOT_MODE1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6E0), + MX53_PIN_RESET_IN_B = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6E4), + MX53_PIN_BOOT_MODE0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6E8), + MX53_PIN_TEST_MODE = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6EC), + MX53_PIN_GRP_ADDDS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6F0), + MX53_PIN_GRP_DDRMODE_CTL = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6F4), + MX53_PIN_GRP_DDRPKE = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6FC), + MX53_PIN_GRP_DDRPK = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x708), + MX53_PIN_GRP_TERM_CTL3 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x70C), + MX53_PIN_GRP_DDRHYS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x710), + MX53_PIN_GRP_DDRMODE = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x714), + MX53_PIN_GRP_B0DS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x718), + MX53_PIN_GRP_B1DS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x71C), + MX53_PIN_GRP_CTLDS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x720), + MX53_PIN_GRP_DDR_TYPE = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x724), + MX53_PIN_GRP_B2DS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x728), + MX53_PIN_GRP_B3DS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x72C), +}; + +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_ARCH_MXC_MX53_PINS_H__ */ diff --git a/include/asm-arm/mach-types.h b/include/asm-arm/mach-types.h index 5293d67..dc3ec1a 100644 --- a/include/asm-arm/mach-types.h +++ b/include/asm-arm/mach-types.h @@ -2241,6 +2241,7 @@ extern unsigned int __machine_arch_type; #define MACH_TYPE_OMAP3_WL_FF 2258 #define MACH_TYPE_SIMCOM 2259 #define MACH_TYPE_MCWEBIO 2260 +#define MACH_TYPE_MX53_EVK 2716 #ifdef CONFIG_ARCH_EBSA110 # ifdef machine_arch_type @@ -27406,6 +27407,18 @@ extern unsigned int __machine_arch_type; # define machine_is_mx51_babbage() (0) #endif +#ifdef CONFIG_MACH_MX53_EVK +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MX53_EVK +# endif +# define machine_is_mx53_evk() (machine_arch_type == MACH_TYPE_MX53_EVK) +#else +# define machine_is_mx53_evk() (0) +#endif + #ifdef CONFIG_MACH_S3C2440TURKIYE # ifdef machine_arch_type # undef machine_arch_type diff --git a/include/configs/mx53_evk.h b/include/configs/mx53_evk.h new file mode 100644 index 0000000..010ac76 --- /dev/null +++ b/include/configs/mx53_evk.h @@ -0,0 +1,225 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. + * + * Configuration settings for the MX53-EVK Freescale board. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/arch/mx53.h> + + /* High Level Configuration Options */ +#define CONFIG_ARMV7 /* This is armv7 Cortex-A8 CPU core */ +#define CONFIG_SYS_APCS_GNU + +#define CONFIG_MXC +#define CONFIG_MX53 +#define CONFIG_MX53_EVK +#define CONFIG_FLASH_HEADER +#define CONFIG_FLASH_HEADER_OFFSET 0x400 + +#define CONFIG_SKIP_RELOCATE_UBOOT + +#define CONFIG_MX53_HCLK_FREQ 24000000 /* RedBoot says 26MHz */ + +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#define BOARD_LATE_INIT +/* + * Disabled for now due to build problems under Debian and a significant + * increase in the final file size: 144260 vs. 109536 Bytes. + */ + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_REVISION_TAG 1 +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) +/* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 + +/* + * Hardware drivers + */ +#define CONFIG_MX53_UART 1 +#define CONFIG_MX53_UART1 1 + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} + +/*********************************************************** + * Command definition + ***********************************************************/ + +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_NET_RETRY_COUNT 100 +#define CONFIG_NET_MULTI 1 +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_DNS + +#define CONFIG_CMD_MMC +#define CONFIG_CMD_ENV + +#undef CONFIG_CMD_IMLS + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_PRIME "FEC0" + +#define CONFIG_LOADADDR 0x70800000 /* loadaddr env var */ +#define CONFIG_RD_LOADADDR (CONFIG_LOADADDR + 0x300000) + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "ethprime=FEC0\0" \ + "uboot=u-boot.bin\0" \ + "kernel=uImage\0" \ + "nfsroot=/opt/eldk/arm\0" \ + "bootargs_base=setenv bootargs console=ttymxc0,115200\0"\ + "bootargs_nfs=setenv bootargs ${bootargs} root=/dev/nfs "\ + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0"\ + "bootcmd_net=run bootargs_base bootargs_nfs; " \ + "tftpboot ${loadaddr} ${kernel}; bootm\0" \ + "bootargs_mmc=setenv bootargs ${bootargs} ip=dhcp " \ + "root=/dev/mmcblk0p2 rootwait\0" \ + "bootcmd_mmc=run bootargs_base bootargs_mmc; bootm\0" \ + "bootcmd=run bootcmd_net\0" \ + + +#define CONFIG_ARP_TIMEOUT 200UL + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "EVK U-Boot > " +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ + +#define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x10000 + +#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_CMDLINE_EDITING 1 + +#define CONFIG_FEC0_IOBASE FEC_BASE_ADDR +#define CONFIG_FEC0_PINMUX -1 +#define CONFIG_FEC0_PHY_ADDR -1 +#define CONFIG_FEC0_MIIBASE -1 + +#define CONFIG_MXC_FEC +#define CONFIG_MII +#define CONFIG_DISCOVER_PHY + +/* + * I2C Configs + */ +#define CONFIG_CMD_I2C 1 +#define CONFIG_HARD_I2C 1 +#define CONFIG_I2C_MXC 1 +#define CONFIG_SYS_I2C_PORT I2C2_BASE_ADDR +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 0xfe + + +/* + * SPI Configs + */ +#define CONFIG_FSL_SF 1 +#define CONFIG_CMD_SPI +#define CONFIG_CMD_SF +#define CONFIG_SPI_FLASH_IMX_ATMEL 1 +#define CONFIG_SPI_FLASH_CS 1 +#define CONFIG_IMX_ECSPI +#define IMX_CSPI_VER_2_3 1 +#define MAX_SPI_BYTES (64 * 4) + +/* + * MMC Configs + */ +#ifdef CONFIG_CMD_MMC + #define CONFIG_MMC 1 + #define CONFIG_GENERIC_MMC + #define CONFIG_IMX_MMC + #define CONFIG_DOS_PARTITION 1 + #define CONFIG_CMD_FAT 1 + #define CONFIG_CMD_EXT2 1 +#endif +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 CSD0_BASE_ADDR +#define PHYS_SDRAM_1_SIZE (1024 * 1024 * 1024) + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CONFIG_SYS_NO_FLASH + +/* Monitor at beginning of flash */ +#define CONFIG_FSL_ENV_IN_MMC + +#define CONFIG_ENV_SECT_SIZE (128 * 1024) +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE + +#if defined(CONFIG_FSL_ENV_IN_NAND) + #define CONFIG_ENV_IS_IN_NAND 1 + #define CONFIG_ENV_OFFSET 0x100000 +#elif defined(CONFIG_FSL_ENV_IN_MMC) + #define CONFIG_ENV_IS_IN_MMC 1 + #define CONFIG_ENV_OFFSET (768 * 1024) +#elif defined(CONFIG_FSL_ENV_IN_SF) + #define CONFIG_ENV_IS_IN_SPI_FLASH 1 + #define CONFIG_ENV_SPI_CS 1 + #define CONFIG_ENV_OFFSET (768 * 1024) +#else + #define CONFIG_ENV_IS_NOWHERE 1 +#endif +#endif /* __CONFIG_H */ |