summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/asm-arm/arch-pxa/mmc.h200
-rw-r--r--include/asm-arm/errno.h138
-rw-r--r--include/asm-arm/global_data.h2
-rw-r--r--include/cmd_confdefs.h4
-rw-r--r--include/cmd_fat.h61
-rw-r--r--include/cmd_mmc.h41
-rw-r--r--include/common.h16
-rw-r--r--include/commproc.h24
-rw-r--r--include/configs/LANTEC.h1
-rw-r--r--include/configs/MPC8260ADS.h1
-rw-r--r--include/configs/MPC8266ADS.h1
-rw-r--r--include/configs/RBC823.h1
-rw-r--r--include/configs/TQM862L.h9
-rw-r--r--include/configs/TQM862M.h484
-rw-r--r--include/configs/ep8260.h1
-rw-r--r--include/configs/hymod.h1
-rw-r--r--include/configs/lubbock.h227
-rw-r--r--include/fat.h208
-rw-r--r--include/flash.h5
-rw-r--r--include/mmc.h33
-rw-r--r--include/net.h12
21 files changed, 1337 insertions, 133 deletions
diff --git a/include/asm-arm/arch-pxa/mmc.h b/include/asm-arm/arch-pxa/mmc.h
new file mode 100644
index 0000000..4d61ade
--- /dev/null
+++ b/include/asm-arm/arch-pxa/mmc.h
@@ -0,0 +1,200 @@
+/*
+ * linux/drivers/mmc/mmc_pxa.h
+ *
+ * Author: Vladimir Shebordaev, Igor Oblakov
+ * Copyright: MontaVista Software Inc.
+ *
+ * $Id: mmc_pxa.h,v 0.3.1.6 2002/09/25 19:25:48 ted Exp ted $
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __MMC_PXA_P_H__
+#define __MMC_PXA_P_H__
+
+/* PXA-250 MMC controller registers */
+
+/* MMC_STRPCL */
+#define MMC_STRPCL_STOP_CLK (0x0001UL)
+#define MMC_STRPCL_START_CLK (0x0002UL)
+
+/* MMC_STAT */
+#define MMC_STAT_END_CMD_RES (0x0001UL << 13)
+#define MMC_STAT_PRG_DONE (0x0001UL << 12)
+#define MMC_STAT_DATA_TRAN_DONE (0x0001UL << 11)
+#define MMC_STAT_CLK_EN (0x0001UL << 8)
+#define MMC_STAT_RECV_FIFO_FULL (0x0001UL << 7)
+#define MMC_STAT_XMIT_FIFO_EMPTY (0x0001UL << 6)
+#define MMC_STAT_RES_CRC_ERROR (0x0001UL << 5)
+#define MMC_STAT_SPI_READ_ERROR_TOKEN (0x0001UL << 4)
+#define MMC_STAT_CRC_READ_ERROR (0x0001UL << 3)
+#define MMC_STAT_CRC_WRITE_ERROR (0x0001UL << 2)
+#define MMC_STAT_TIME_OUT_RESPONSE (0x0001UL << 1)
+#define MMC_STAT_READ_TIME_OUT (0x0001UL)
+
+#define MMC_STAT_ERRORS (MMC_STAT_RES_CRC_ERROR|MMC_STAT_SPI_READ_ERROR_TOKEN\
+ |MMC_STAT_CRC_READ_ERROR|MMC_STAT_TIME_OUT_RESPONSE\
+ |MMC_STAT_READ_TIME_OUT|MMC_STAT_CRC_WRITE_ERROR)
+
+/* MMC_CLKRT */
+#define MMC_CLKRT_20MHZ (0x0000UL)
+#define MMC_CLKRT_10MHZ (0x0001UL)
+#define MMC_CLKRT_5MHZ (0x0002UL)
+#define MMC_CLKRT_2_5MHZ (0x0003UL)
+#define MMC_CLKRT_1_25MHZ (0x0004UL)
+#define MMC_CLKRT_0_625MHZ (0x0005UL)
+#define MMC_CLKRT_0_3125MHZ (0x0006UL)
+
+/* MMC_SPI */
+#define MMC_SPI_DISABLE (0x00UL)
+#define MMC_SPI_EN (0x01UL)
+#define MMC_SPI_CS_EN (0x01UL << 2)
+#define MMC_SPI_CS_ADDRESS (0x01UL << 3)
+#define MMC_SPI_CRC_ON (0x01UL << 1)
+
+/* MMC_CMDAT */
+#define MMC_CMDAT_MMC_DMA_EN (0x0001UL << 7)
+#define MMC_CMDAT_INIT (0x0001UL << 6)
+#define MMC_CMDAT_BUSY (0x0001UL << 5)
+#define MMC_CMDAT_STREAM (0x0001UL << 4)
+#define MMC_CMDAT_BLOCK (0x0000UL << 4)
+#define MMC_CMDAT_WRITE (0x0001UL << 3)
+#define MMC_CMDAT_READ (0x0000UL << 3)
+#define MMC_CMDAT_DATA_EN (0x0001UL << 2)
+#define MMC_CMDAT_R1 (0x0001UL)
+#define MMC_CMDAT_R2 (0x0002UL)
+#define MMC_CMDAT_R3 (0x0003UL)
+
+/* MMC_RESTO */
+#define MMC_RES_TO_MAX (0x007fUL) /* [6:0] */
+
+/* MMC_RDTO */
+#define MMC_READ_TO_MAX (0x0ffffUL) /* [15:0] */
+
+/* MMC_BLKLEN */
+#define MMC_BLK_LEN_MAX (0x03ffUL) /* [9:0] */
+
+/* MMC_PRTBUF */
+#define MMC_PRTBUF_BUF_PART_FULL (0x01UL)
+#define MMC_PRTBUF_BUF_FULL (0x00UL )
+
+/* MMC_I_MASK */
+#define MMC_I_MASK_TXFIFO_WR_REQ (0x01UL << 6)
+#define MMC_I_MASK_RXFIFO_RD_REQ (0x01UL << 5)
+#define MMC_I_MASK_CLK_IS_OFF (0x01UL << 4)
+#define MMC_I_MASK_STOP_CMD (0x01UL << 3)
+#define MMC_I_MASK_END_CMD_RES (0x01UL << 2)
+#define MMC_I_MASK_PRG_DONE (0x01UL << 1)
+#define MMC_I_MASK_DATA_TRAN_DONE (0x01UL)
+#define MMC_I_MASK_ALL (0x07fUL)
+
+
+/* MMC_I_REG */
+#define MMC_I_REG_TXFIFO_WR_REQ (0x01UL << 6)
+#define MMC_I_REG_RXFIFO_RD_REQ (0x01UL << 5)
+#define MMC_I_REG_CLK_IS_OFF (0x01UL << 4)
+#define MMC_I_REG_STOP_CMD (0x01UL << 3)
+#define MMC_I_REG_END_CMD_RES (0x01UL << 2)
+#define MMC_I_REG_PRG_DONE (0x01UL << 1)
+#define MMC_I_REG_DATA_TRAN_DONE (0x01UL)
+#define MMC_I_REG_ALL (0x007fUL)
+
+/* MMC_CMD */
+#define MMC_CMD_INDEX_MAX (0x006fUL) /* [5:0] */
+#define CMD(x) (x)
+
+#define MMC_DEFAULT_RCA 1
+
+#define MMC_BLOCK_SIZE 512
+#define MMC_CMD_RESET 0
+#define MMC_CMD_SEND_OP_COND 1
+#define MMC_CMD_ALL_SEND_CID 2
+#define MMC_CMD_SET_RCA 3
+#define MMC_CMD_SEND_CSD 9
+#define MMC_CMD_SEND_CID 10
+#define MMC_CMD_SEND_STATUS 13
+#define MMC_CMD_SET_BLOCKLEN 16
+#define MMC_CMD_READ_BLOCK 17
+#define MMC_CMD_RD_BLK_MULTI 18
+#define MMC_CMD_WRITE_BLOCK 24
+
+#define MMC_MAX_BLOCK_SIZE 512
+
+#define MMC_R1_IDLE_STATE 0x01
+#define MMC_R1_ERASE_STATE 0x02
+#define MMC_R1_ILLEGAL_CMD 0x04
+#define MMC_R1_COM_CRC_ERR 0x08
+#define MMC_R1_ERASE_SEQ_ERR 0x01
+#define MMC_R1_ADDR_ERR 0x02
+#define MMC_R1_PARAM_ERR 0x04
+
+#define MMC_R1B_WP_ERASE_SKIP 0x0002
+#define MMC_R1B_ERR 0x0004
+#define MMC_R1B_CC_ERR 0x0008
+#define MMC_R1B_CARD_ECC_ERR 0x0010
+#define MMC_R1B_WP_VIOLATION 0x0020
+#define MMC_R1B_ERASE_PARAM 0x0040
+#define MMC_R1B_OOR 0x0080
+#define MMC_R1B_IDLE_STATE 0x0100
+#define MMC_R1B_ERASE_RESET 0x0200
+#define MMC_R1B_ILLEGAL_CMD 0x0400
+#define MMC_R1B_COM_CRC_ERR 0x0800
+#define MMC_R1B_ERASE_SEQ_ERR 0x1000
+#define MMC_R1B_ADDR_ERR 0x2000
+#define MMC_R1B_PARAM_ERR 0x4000
+
+typedef struct mmc_cid
+{
+/* FIXME: BYTE_ORDER */
+ uchar year:4,
+ month:4;
+ uchar sn[3];
+ uchar fwrev:4,
+ hwrev:4;
+ uchar name[6];
+ uchar id[3];
+} mmc_cid_t;
+
+typedef struct mmc_csd
+{
+ uchar ecc:2,
+ file_format:2,
+ tmp_write_protect:1,
+ perm_write_protect:1,
+ copy:1,
+ file_format_grp:1;
+ uint64_t content_prot_app:1,
+ rsvd3:4,
+ write_bl_partial:1,
+ write_bl_len:4,
+ r2w_factor:3,
+ default_ecc:2,
+ wp_grp_enable:1,
+ wp_grp_size:5,
+ erase_grp_mult:5,
+ erase_grp_size:5,
+ c_size_mult1:3,
+ vdd_w_curr_max:3,
+ vdd_w_curr_min:3,
+ vdd_r_curr_max:3,
+ vdd_r_curr_min:3,
+ c_size:12,
+ rsvd2:2,
+ dsr_imp:1,
+ read_blk_misalign:1,
+ write_blk_misalign:1,
+ read_bl_partial:1;
+
+ ushort read_bl_len:4,
+ ccc:12;
+ uchar tran_speed;
+ uchar nsac;
+ uchar taac;
+ uchar rsvd1:2,
+ spec_vers:4,
+ csd_structure:2;
+} mmc_csd_t;
+
+
+#endif /* __MMC_PXA_P_H__ */
diff --git a/include/asm-arm/errno.h b/include/asm-arm/errno.h
new file mode 100644
index 0000000..134a8fc
--- /dev/null
+++ b/include/asm-arm/errno.h
@@ -0,0 +1,138 @@
+#ifndef _ARM_ERRNO_H
+#define _ARM_ERRNO_H
+
+#define EPERM 1 /* Operation not permitted */
+#define ENOENT 2 /* No such file or directory */
+#define ESRCH 3 /* No such process */
+#define EINTR 4 /* Interrupted system call */
+#define EIO 5 /* I/O error */
+#define ENXIO 6 /* No such device or address */
+#define E2BIG 7 /* Arg list too long */
+#define ENOEXEC 8 /* Exec format error */
+#define EBADF 9 /* Bad file number */
+#define ECHILD 10 /* No child processes */
+#define EAGAIN 11 /* Try again */
+#define ENOMEM 12 /* Out of memory */
+#define EACCES 13 /* Permission denied */
+#define EFAULT 14 /* Bad address */
+#define ENOTBLK 15 /* Block device required */
+#define EBUSY 16 /* Device or resource busy */
+#define EEXIST 17 /* File exists */
+#define EXDEV 18 /* Cross-device link */
+#define ENODEV 19 /* No such device */
+#define ENOTDIR 20 /* Not a directory */
+#define EISDIR 21 /* Is a directory */
+#define EINVAL 22 /* Invalid argument */
+#define ENFILE 23 /* File table overflow */
+#define EMFILE 24 /* Too many open files */
+#define ENOTTY 25 /* Not a typewriter */
+#define ETXTBSY 26 /* Text file busy */
+#define EFBIG 27 /* File too large */
+#define ENOSPC 28 /* No space left on device */
+#define ESPIPE 29 /* Illegal seek */
+#define EROFS 30 /* Read-only file system */
+#define EMLINK 31 /* Too many links */
+#define EPIPE 32 /* Broken pipe */
+#define EDOM 33 /* Math argument out of domain of func */
+#define ERANGE 34 /* Math result not representable */
+#define EDEADLK 35 /* Resource deadlock would occur */
+#define ENAMETOOLONG 36 /* File name too long */
+#define ENOLCK 37 /* No record locks available */
+#define ENOSYS 38 /* Function not implemented */
+#define ENOTEMPTY 39 /* Directory not empty */
+#define ELOOP 40 /* Too many symbolic links encountered */
+#define EWOULDBLOCK EAGAIN /* Operation would block */
+#define ENOMSG 42 /* No message of desired type */
+#define EIDRM 43 /* Identifier removed */
+#define ECHRNG 44 /* Channel number out of range */
+#define EL2NSYNC 45 /* Level 2 not synchronized */
+#define EL3HLT 46 /* Level 3 halted */
+#define EL3RST 47 /* Level 3 reset */
+#define ELNRNG 48 /* Link number out of range */
+#define EUNATCH 49 /* Protocol driver not attached */
+#define ENOCSI 50 /* No CSI structure available */
+#define EL2HLT 51 /* Level 2 halted */
+#define EBADE 52 /* Invalid exchange */
+#define EBADR 53 /* Invalid request descriptor */
+#define EXFULL 54 /* Exchange full */
+#define ENOANO 55 /* No anode */
+#define EBADRQC 56 /* Invalid request code */
+#define EBADSLT 57 /* Invalid slot */
+#define EDEADLOCK 58 /* File locking deadlock error */
+#define EBFONT 59 /* Bad font file format */
+#define ENOSTR 60 /* Device not a stream */
+#define ENODATA 61 /* No data available */
+#define ETIME 62 /* Timer expired */
+#define ENOSR 63 /* Out of streams resources */
+#define ENONET 64 /* Machine is not on the network */
+#define ENOPKG 65 /* Package not installed */
+#define EREMOTE 66 /* Object is remote */
+#define ENOLINK 67 /* Link has been severed */
+#define EADV 68 /* Advertise error */
+#define ESRMNT 69 /* Srmount error */
+#define ECOMM 70 /* Communication error on send */
+#define EPROTO 71 /* Protocol error */
+#define EMULTIHOP 72 /* Multihop attempted */
+#define EDOTDOT 73 /* RFS specific error */
+#define EBADMSG 74 /* Not a data message */
+#define EOVERFLOW 75 /* Value too large for defined data type */
+#define ENOTUNIQ 76 /* Name not unique on network */
+#define EBADFD 77 /* File descriptor in bad state */
+#define EREMCHG 78 /* Remote address changed */
+#define ELIBACC 79 /* Can not access a needed shared library */
+#define ELIBBAD 80 /* Accessing a corrupted shared library */
+#define ELIBSCN 81 /* .lib section in a.out corrupted */
+#define ELIBMAX 82 /* Attempting to link in too many shared libraries */
+#define ELIBEXEC 83 /* Cannot exec a shared library directly */
+#define EILSEQ 84 /* Illegal byte sequence */
+#define ERESTART 85 /* Interrupted system call should be restarted */
+#define ESTRPIPE 86 /* Streams pipe error */
+#define EUSERS 87 /* Too many users */
+#define ENOTSOCK 88 /* Socket operation on non-socket */
+#define EDESTADDRREQ 89 /* Destination address required */
+#define EMSGSIZE 90 /* Message too long */
+#define EPROTOTYPE 91 /* Protocol wrong type for socket */
+#define ENOPROTOOPT 92 /* Protocol not available */
+#define EPROTONOSUPPORT 93 /* Protocol not supported */
+#define ESOCKTNOSUPPORT 94 /* Socket type not supported */
+#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */
+#define EPFNOSUPPORT 96 /* Protocol family not supported */
+#define EAFNOSUPPORT 97 /* Address family not supported by protocol */
+#define EADDRINUSE 98 /* Address already in use */
+#define EADDRNOTAVAIL 99 /* Cannot assign requested address */
+#define ENETDOWN 100 /* Network is down */
+#define ENETUNREACH 101 /* Network is unreachable */
+#define ENETRESET 102 /* Network dropped connection because of reset */
+#define ECONNABORTED 103 /* Software caused connection abort */
+#define ECONNRESET 104 /* Connection reset by peer */
+#define ENOBUFS 105 /* No buffer space available */
+#define EISCONN 106 /* Transport endpoint is already connected */
+#define ENOTCONN 107 /* Transport endpoint is not connected */
+#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */
+#define ETOOMANYREFS 109 /* Too many references: cannot splice */
+#define ETIMEDOUT 110 /* Connection timed out */
+#define ECONNREFUSED 111 /* Connection refused */
+#define EHOSTDOWN 112 /* Host is down */
+#define EHOSTUNREACH 113 /* No route to host */
+#define EALREADY 114 /* Operation already in progress */
+#define EINPROGRESS 115 /* Operation now in progress */
+#define ESTALE 116 /* Stale NFS file handle */
+#define EUCLEAN 117 /* Structure needs cleaning */
+#define ENOTNAM 118 /* Not a XENIX named type file */
+#define ENAVAIL 119 /* No XENIX semaphores available */
+#define EISNAM 120 /* Is a named type file */
+#define EREMOTEIO 121 /* Remote I/O error */
+#define EDQUOT 122 /* Quota exceeded */
+
+#define ENOMEDIUM 123 /* No medium found */
+#define EMEDIUMTYPE 124 /* Wrong medium type */
+
+/* Should never be seen by user programs */
+#define ERESTARTSYS 512
+#define ERESTARTNOINTR 513
+#define ERESTARTNOHAND 514 /* restart if no handler.. */
+#define ENOIOCTLCMD 515 /* No ioctl command */
+
+#define _LAST_ERRNO 515
+
+#endif
diff --git a/include/asm-arm/global_data.h b/include/asm-arm/global_data.h
index 892710d..c804768 100644
--- a/include/asm-arm/global_data.h
+++ b/include/asm-arm/global_data.h
@@ -41,8 +41,8 @@ typedef struct global_data {
unsigned long reloc_off; /* Relocation Offset */
unsigned long env_addr; /* Address of Environment struct */
unsigned long env_valid; /* Checksum of Environment valid? */
-#ifdef CONFIG_VFD
unsigned long fb_base; /* base address of frame buffer */
+#ifdef CONFIG_VFD
unsigned char vfd_type; /* display type */
#endif
#if 0
diff --git a/include/cmd_confdefs.h b/include/cmd_confdefs.h
index 7ab553d..2d9b5a5 100644
--- a/include/cmd_confdefs.h
+++ b/include/cmd_confdefs.h
@@ -82,6 +82,8 @@
#define CFG_CMD_BMP 0x0001000000000000 /* BMP support */
#define CFG_CMD_PORTIO 0x0002000000000000 /* Port I/O */
#define CFG_CMD_PING 0x0004000000000000 /* ping support */
+#define CFG_CMD_MMC 0x0008000000000000 /* MMC support */
+#define CFG_CMD_FAT 0x0010000000000000 /* FAT support */
#define CFG_CMD_ALL 0xFFFFFFFFFFFFFFFF /* ALL commands */
@@ -102,6 +104,7 @@
CFG_CMD_EEPROM | \
CFG_CMD_ELF | \
CFG_CMD_FDC | \
+ CFG_CMD_FAT | \
CFG_CMD_FDOS | \
CFG_CMD_HWFLOW | \
CFG_CMD_I2C | \
@@ -111,6 +114,7 @@
CFG_CMD_JFFS2 | \
CFG_CMD_KGDB | \
CFG_CMD_MII | \
+ CFG_CMD_MMC | \
CFG_CMD_NAND | \
CFG_CMD_PCI | \
CFG_CMD_PCMCIA | \
diff --git a/include/cmd_fat.h b/include/cmd_fat.h
new file mode 100644
index 0000000..12245bd
--- /dev/null
+++ b/include/cmd_fat.h
@@ -0,0 +1,61 @@
+/*
+ * (C) Copyright 2002
+ * Richard Jones, rjones@nexus-tech.net
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * FAT support
+ */
+#ifndef _CMD_FAT_H
+#define _CMD_FAT_H
+
+#if (CONFIG_COMMANDS & CFG_CMD_FAT)
+
+int do_fat_fsload (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+int do_fat_fsinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+int do_fat_ls (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+int do_fat_dump (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+#define CMD_TBL_FAT MK_CMD_TBL_ENTRY( \
+ "fatload", 5, 4, 0, do_fat_fsload, \
+ "fatload - load binary file from a dos filesystem\n", \
+ "[ off ] [ filename ]\n" \
+ " - load binary file from dos filesystem\n" \
+ " with offset 'off'\n" \
+), \
+ MK_CMD_TBL_ENTRY( \
+ "fatinfo", 5, 1, 1, do_fat_fsinfo, \
+ "fatinfo - print information about filesystem\n", \
+ "\n" \
+ " - print information about filesystem\n" \
+), \
+ MK_CMD_TBL_ENTRY( \
+ "fatls", 2, 2, 1, do_fat_ls, \
+ "fatls - list files in a directory (default /)\n", \
+ "[ directory ]\n" \
+ " - list files in a directory.\n" \
+),
+
+#else
+#define CMD_TBL_FAT
+#endif /* CFG_CMD_FAT */
+
+#endif /* _CMD_FAT_H */
diff --git a/include/cmd_mmc.h b/include/cmd_mmc.h
new file mode 100644
index 0000000..ff5a176
--- /dev/null
+++ b/include/cmd_mmc.h
@@ -0,0 +1,41 @@
+/*
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _CMD_MMC_H_
+#define _CMD_MMC_H_
+
+#include <command.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_MMC)
+
+#define CMD_TBL_MMC MK_CMD_TBL_ENTRY( \
+ "mmcinit", 4, 1, 0, do_mmc, \
+ "mmcinit - init mmc card\n", \
+),
+#else
+
+#define CMD_TBL_MMC
+
+#endif
+
+int do_mmc (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+#endif /* _CMD_MMC_H_ */
diff --git a/include/common.h b/include/common.h
index 0a252c5..d312682 100644
--- a/include/common.h
+++ b/include/common.h
@@ -73,10 +73,21 @@ typedef void (interrupt_handler_t)(void *);
#include <asm/u-boot.h> /* boot information for Linux kernel */
#include <asm/global_data.h> /* global data used for startup functions */
-/* enable common handling for all TQM8xxL boards */
+/*
+ * enable common handling for all TQM8xxL/M boards:
+ * - CONFIG_TQM8xxM will be defined for all TQM8xxM boards
+ * - CONFIG_TQM8xxL will be defined for all TQM8xxL _and_ TQM8xxM boards
+ */
+#if defined(CONFIG_TQM823M) || defined(CONFIG_TQM850M) || \
+ defined(CONFIG_TQM855M) || defined(CONFIG_TQM860M) || \
+ defined(CONFIG_TQM862M)
+# ifndef CONFIG_TQM8xxM
+# define CONFIG_TQM8xxM
+# endif
+#endif
#if defined(CONFIG_TQM823L) || defined(CONFIG_TQM850L) || \
defined(CONFIG_TQM855L) || defined(CONFIG_TQM860L) || \
- defined(CONFIG_TQM862L)
+ defined(CONFIG_TQM862L) || defined(CONFIG_TQM8xxM)
# ifndef CONFIG_TQM8xxL
# define CONFIG_TQM8xxL
# endif
@@ -237,6 +248,7 @@ void load_sernum_ethaddr (void);
/* $(BOARD)/$(BOARD).c */
int board_pre_init (void);
+int board_post_init (void);
int board_postclk_init (void); /* after clocks/timebase, before env/serial */
void board_poweroff (void);
diff --git a/include/commproc.h b/include/commproc.h
index 2d9ab5c..f0ee179 100644
--- a/include/commproc.h
+++ b/include/commproc.h
@@ -1331,15 +1331,13 @@ typedef struct scc_enet {
#endif /* CONFIG_SXNI855T */
-/*** MVS1, TQM823L, TQM850L, ETX094, R360MPI ***********************/
+/*** MVS1, TQM823L/M, TQM850L/M, ETX094, R360MPI *******************/
#if (defined(CONFIG_MVS) && CONFIG_MVS < 2) || \
- defined(CONFIG_R360MPI) || \
- defined(CONFIG_RBC823) || \
- defined(CONFIG_TQM823L) || \
- defined(CONFIG_TQM850L) || \
- defined(CONFIG_ETX094) || \
- defined(CONFIG_RRVISION)|| \
+ defined(CONFIG_R360MPI) || defined(CONFIG_RBC823) || \
+ defined(CONFIG_TQM823L) || defined(CONFIG_TQM823M) || \
+ defined(CONFIG_TQM850L) || defined(CONFIG_TQM850M) || \
+ defined(CONFIG_ETX094) || defined(CONFIG_RRVISION)|| \
(defined(CONFIG_LANTEC) && CONFIG_LANTEC < 2)
/* Bits in parallel I/O port registers that have to be set/cleared
* to configure the pins for SCC2 use.
@@ -1365,13 +1363,13 @@ typedef struct scc_enet {
*/
#define SICR_ENET_MASK ((uint)0x0000ff00)
#define SICR_ENET_CLKRT ((uint)0x00002600)
-#endif /* CONFIG_MVS v1, CONFIG_TQM823L, CONFIG_TQM850L, etc. */
+#endif /* CONFIG_MVS v1, CONFIG_TQM823L/M, CONFIG_TQM850L/M, etc. */
-/*** TQM855L, TQM860L, TQM862L **************************************/
+/*** TQM855L/M, TQM860L/M, TQM862L/M ********************************/
-#if defined(CONFIG_TQM855L) || \
- defined(CONFIG_TQM860L) || \
- defined(CONFIG_TQM862L)
+#if defined(CONFIG_TQM855L) || defined(CONFIG_TQM855M) || \
+ defined(CONFIG_TQM860L) || defined(CONFIG_TQM860M) || \
+ defined(CONFIG_TQM862L) || defined(CONFIG_TQM862M)
# ifdef CONFIG_SCC1_ENET /* use SCC for 10Mbps Ethernet */
@@ -1419,7 +1417,7 @@ typedef struct scc_enet {
#define PD_MII_MASK ((ushort)0x1FFF) /* PD 3...15 */
# endif /* CONFIG_FEC_ENET */
-#endif /* CONFIG_TQM855L, TQM860L, TQM862L */
+#endif /* CONFIG_TQM855L/M, TQM860L/M, TQM862L/M */
/*** V37 **********************************************************/
diff --git a/include/configs/LANTEC.h b/include/configs/LANTEC.h
index 81e2079..56ecf0c 100644
--- a/include/configs/LANTEC.h
+++ b/include/configs/LANTEC.h
@@ -99,6 +99,7 @@
& ~CFG_CMD_JFFS2 \
& ~CFG_CMD_KGDB \
& ~CFG_CMD_MII \
+ & ~CFG_CMD_MMC \
& ~CFG_CMD_NAND \
& ~CFG_CMD_PCI \
& ~CFG_CMD_PCMCIA \
diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h
index 1849bcc..30b7207 100644
--- a/include/configs/MPC8260ADS.h
+++ b/include/configs/MPC8260ADS.h
@@ -129,6 +129,7 @@
CFG_CMD_KGDB | \
CFG_CMD_NAND | \
CFG_CMD_MII | \
+ CFG_CMD_MMC | \
CFG_CMD_PCI | \
CFG_CMD_PCMCIA | \
CFG_CMD_SCSI | \
diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h
index 414d515..9e8d732 100644
--- a/include/configs/MPC8266ADS.h
+++ b/include/configs/MPC8266ADS.h
@@ -161,6 +161,7 @@
CFG_CMD_IDE | \
CFG_CMD_JFFS2 | \
CFG_CMD_KGDB | \
+ CFG_CMD_MMC | \
CFG_CMD_NAND | \
CFG_CMD_PCMCIA | \
CFG_CMD_SCSI | \
diff --git a/include/configs/RBC823.h b/include/configs/RBC823.h
index 08eed27..af6e98b 100644
--- a/include/configs/RBC823.h
+++ b/include/configs/RBC823.h
@@ -113,6 +113,7 @@
~CFG_CMD_JFFS2 & \
~CFG_CMD_DTT & \
~CFG_CMD_MII & \
+ ~CFG_CMD_MMC & \
/*~CFG_CMD_NET &*/ \
/*~CFG_CMD_ELF &*/ \
/* ~CFG_CMD_EEPROM & */ \
diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h
index 1d0aea1..76e66ca 100644
--- a/include/configs/TQM862L.h
+++ b/include/configs/TQM862L.h
@@ -179,6 +179,7 @@
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
#define CFG_ENV_IS_IN_FLASH 1
+
#define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
@@ -335,7 +336,7 @@
*/
#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
-#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #0 */
+#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #1 */
/* used to re-map FLASH both when starting from SRAM or FLASH:
* restrict access enough to keep SRAM working (if any)
@@ -349,10 +350,8 @@
*/
#if defined(CONFIG_100MHz)
/* 100 MHz CPU - 50 MHz bus:
- * 0x...926: 9 = OR_CSNT_SAM + OR_BI; 2 = OR_SCY_2_CLK; 6 = OR_TRLX + OR_EHTR
- * ACS = 00, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 1 */
-#define CFG_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \
- OR_SCY_2_CLK | OR_EHTR | OR_BI)
+ * ACS = 01, TRLX = 0, CSNT = 0, SCY = 7, EHTR = 0 */
+#define CFG_OR_TIMING_FLASH (OR_ACS_DIV4 | OR_SCY_7_CLK | OR_BI)
#elif defined(CONFIG_80MHz)
/* 80 MHz CPU - 40 MHz bus:
* ACS = 00, TRLX = 0, CSNT = 1, SCY = 3, EHTR = 1 */
diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h
new file mode 100644
index 0000000..1da9a45
--- /dev/null
+++ b/include/configs/TQM862M.h
@@ -0,0 +1,484 @@
+/*
+ * (C) Copyright 2000, 2001, 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC860 1
+#define CONFIG_MPC860T 1
+#define CONFIG_MPC862 1
+
+#define CONFIG_TQM862M 1 /* ...on a TQM8xxM module */
+
+#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
+#undef CONFIG_8xx_CONS_SMC2
+#undef CONFIG_8xx_CONS_NONE
+
+#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
+
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+
+#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
+
+#define CONFIG_BOARD_TYPES 1 /* support board types */
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$(serverip):$(rootpath)\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs $(bootargs) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
+ ":$(hostname):$(netdev):off panic=1\0" \
+ "flash_nfs=run nfsargs addip;" \
+ "bootm $(kernel_addr)\0" \
+ "flash_self=run ramargs addip;" \
+ "bootm $(kernel_addr) $(ramdisk_addr)\0" \
+ "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \
+ "rootpath=/opt/eldk/ppc_8xx\0" \
+ "bootfile=/tftpboot/TQM862M/uImage\0" \
+ "kernel_addr=40080000\0" \
+ "ramdisk_addr=40180000\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run flash_self"
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+#define CONFIG_STATUS_LED 1 /* Status LED enabled */
+
+#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
+
+#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+
+#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
+
+#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_IDE | \
+ CFG_CMD_DATE )
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+
+#if 0
+#define CFG_HUSH_PARSER 1 /* use "hush" command parser */
+#endif
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+/*-----------------------------------------------------------------------
+ * Internal Memory Mapped Register
+ */
+#define CFG_IMMR 0xFFF00000
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR CFG_IMMR
+#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
+#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_FLASH_BASE 0x40000000
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CFG_MONITOR_BASE CFG_FLASH_BASE
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_ENV_IS_IN_FLASH 1
+
+#define CFG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */
+#define CFG_ENV_SIZE 0x08000 /* Total Size of Environment Sector */
+#define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+
+/*-----------------------------------------------------------------------
+ * Hardware Information Block
+ */
+#define CFG_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
+#define CFG_HWINFO_SIZE 0x00000040 /* size of HW Info block */
+#define CFG_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
+#endif
+
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control 11-9
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
+ */
+#if defined(CONFIG_WATCHDOG)
+#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+ SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
+#else
+#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#endif
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration 11-6
+ *-----------------------------------------------------------------------
+ * PCMCIA config., multi-function pin tri-state
+ */
+#ifndef CONFIG_CAN_DRIVER
+#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#else /* we must activate GPL5 in the SIUMCR for CAN */
+#define CFG_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#endif /* CONFIG_CAN_DRIVER */
+
+/*-----------------------------------------------------------------------
+ * TBSCR - Time Base Status and Control 11-26
+ *-----------------------------------------------------------------------
+ * Clear Reference Interrupt Status, Timebase freezing enabled
+ */
+#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+
+/*-----------------------------------------------------------------------
+ * RTCSC - Real-Time Clock Status and Control Register 11-27
+ *-----------------------------------------------------------------------
+ */
+#define CFG_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control 11-31
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
+ */
+#define CFG_PISCR (PISCR_PS | PISCR_PITF)
+
+/*-----------------------------------------------------------------------
+ * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
+ *-----------------------------------------------------------------------
+ * Reset PLL lock status sticky bit, timer expired status bit and timer
+ * interrupt status bit
+ *
+ * If this is a 80 MHz or 100 MHz CPU,
+ * set PLL multiplication factor to 5 (5 * 16 = 80, 5 * 20 = 100)
+ */
+#if defined(CONFIG_80MHz) || defined(CONFIG_100MHz)
+#define CFG_PLPRCR \
+ ( (5-1)<<PLPRCR_MF_SHIFT | PLPRCR_TEXPS | PLPRCR_TMIST )
+#else /* up to 50 MHz we use a 1:1 clock */
+#define CFG_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+#endif /* CONFIG_80MHz | CONFIG_100MHz */
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock and reset Control Register 15-27
+ *-----------------------------------------------------------------------
+ * Set clock output, timebase and RTC source and divider,
+ * power management and some other internal clocks
+ */
+#define SCCR_MASK SCCR_EBDF11
+#if defined(CONFIG_80MHz) || defined(CONFIG_100MHz) /* use 16/20 MHz * 5 */
+#define CFG_SCCR (/* SCCR_TBS | */ \
+ SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
+ SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
+ SCCR_DFALCD00)
+#else /* up to 50 MHz we use a 1:1 clock */
+#define CFG_SCCR (SCCR_TBS | \
+ SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
+ SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
+ SCCR_DFALCD00)
+#endif /* CONFIG_80MHz | CONFIG_100MHz */
+
+/*-----------------------------------------------------------------------
+ * PCMCIA stuff
+ *-----------------------------------------------------------------------
+ *
+ */
+#define CFG_PCMCIA_MEM_ADDR (0xE0000000)
+#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 )
+#define CFG_PCMCIA_DMA_ADDR (0xE4000000)
+#define CFG_PCMCIA_DMA_SIZE ( 64 << 20 )
+#define CFG_PCMCIA_ATTRB_ADDR (0xE8000000)
+#define CFG_PCMCIA_ATTRB_SIZE ( 64 << 20 )
+#define CFG_PCMCIA_IO_ADDR (0xEC000000)
+#define CFG_PCMCIA_IO_SIZE ( 64 << 20 )
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
+ *-----------------------------------------------------------------------
+ */
+
+#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
+
+#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
+#undef CONFIG_IDE_LED /* LED for ide not supported */
+#undef CONFIG_IDE_RESET /* reset for ide not supported */
+
+#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
+#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
+
+#define CFG_ATA_IDE0_OFFSET 0x0000
+
+#define CFG_ATA_BASE_ADDR CFG_PCMCIA_MEM_ADDR
+
+/* Offset for data I/O */
+#define CFG_ATA_DATA_OFFSET (CFG_PCMCIA_MEM_SIZE + 0x320)
+
+/* Offset for normal register accesses */
+#define CFG_ATA_REG_OFFSET (2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+
+/* Offset for alternate registers */
+#define CFG_ATA_ALT_OFFSET 0x0100
+
+/*-----------------------------------------------------------------------
+ *
+ *-----------------------------------------------------------------------
+ *
+ */
+#define CFG_DER 0
+
+/*
+ * Init Memory Controller:
+ *
+ * BR0/1 and OR0/1 (FLASH)
+ */
+
+#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
+#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #1 */
+
+/* used to re-map FLASH both when starting from SRAM or FLASH:
+ * restrict access enough to keep SRAM working (if any)
+ * but not too much to meddle with FLASH accesses
+ */
+#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */
+#define CFG_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
+
+/*
+ * FLASH timing:
+ */
+#if defined(CONFIG_100MHz)
+/* 100 MHz CPU - 50 MHz bus:
+ * ACS = 01, TRLX = 0, CSNT = 0, SCY = 7, EHTR = 0 */
+#define CFG_OR_TIMING_FLASH (OR_ACS_DIV4 | OR_SCY_7_CLK | OR_BI)
+#elif defined(CONFIG_80MHz)
+/* 80 MHz CPU - 40 MHz bus:
+ * ACS = 00, TRLX = 0, CSNT = 1, SCY = 3, EHTR = 1 */
+#define CFG_OR_TIMING_FLASH (OR_ACS_DIV1 | 0 | OR_CSNT_SAM | \
+ OR_SCY_3_CLK | OR_EHTR | OR_BI)
+#elif defined(CONFIG_66MHz)
+/* 66 MHz CPU - 66 MHz bus: ACS = 00, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 1 */
+#define CFG_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \
+ OR_SCY_3_CLK | OR_EHTR | OR_BI)
+#else /* 50 MHz */
+/* 50 MHz CPU - 50 MHz bus: ACS = 00, TRLX = 1, CSNT = 1, SCY = 2, EHTR = 1 */
+#define CFG_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \
+ OR_SCY_2_CLK | OR_EHTR | OR_BI)
+#endif /*CONFIG_??MHz */
+
+#define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH)
+#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
+#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
+
+#define CFG_OR1_REMAP CFG_OR0_REMAP
+#define CFG_OR1_PRELIM CFG_OR0_PRELIM
+#define CFG_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
+
+/*
+ * BR2/3 and OR2/3 (SDRAM)
+ *
+ */
+#define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */
+#define SDRAM_BASE3_PRELIM 0x20000000 /* SDRAM bank #1 */
+#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */
+
+/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
+#define CFG_OR_TIMING_SDRAM 0x00000A00
+
+#define CFG_OR2_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
+#define CFG_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+
+#ifndef CONFIG_CAN_DRIVER
+#define CFG_OR3_PRELIM CFG_OR2_PRELIM
+#define CFG_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#else /* CAN uses CS3#, so we can have only one SDRAM bank anyway */
+#define CFG_CAN_BASE 0xC0000000 /* CAN mapped at 0xC0000000 */
+#define CFG_CAN_OR_AM 0xFFFF8000 /* 32 kB address mask */
+#define CFG_OR3_CAN (CFG_CAN_OR_AM | OR_G5LA | OR_BI)
+#define CFG_BR3_CAN ((CFG_CAN_BASE & BR_BA_MSK) | \
+ BR_PS_8 | BR_MS_UPMB | BR_V )
+#endif /* CONFIG_CAN_DRIVER */
+
+/*
+ * Memory Periodic Timer Prescaler
+ *
+ * The Divider for PTA (refresh timer) configuration is based on an
+ * example SDRAM configuration (64 MBit, one bank). The adjustment to
+ * the number of chip selects (NCS) and the actually needed refresh
+ * rate is done by setting MPTPR.
+ *
+ * PTA is calculated from
+ * PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
+ *
+ * gclk CPU clock (not bus clock!)
+ * Trefresh Refresh cycle * 4 (four word bursts used)
+ *
+ * 4096 Rows from SDRAM example configuration
+ * 1000 factor s -> ms
+ * 32 PTP (pre-divider from MPTPR) from SDRAM example configuration
+ * 4 Number of refresh cycles per period
+ * 64 Refresh cycle in ms per number of rows
+ * --------------------------------------------
+ * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
+ *
+ * 50 MHz => 50.000.000 / Divider = 98
+ * 66 Mhz => 66.000.000 / Divider = 129
+ * 80 Mhz => 80.000.000 / Divider = 156
+ * 100 Mhz => 100.000.000 / Divider = 195
+ */
+#if defined(CONFIG_100MHz)
+#define CFG_MAMR_PTA 195
+#elif defined(CONFIG_80MHz)
+#define CFG_MAMR_PTA 156
+#elif defined(CONFIG_66MHz)
+#define CFG_MAMR_PTA 129
+#else /* 50 MHz */
+#define CFG_MAMR_PTA 98
+#endif /*CONFIG_??MHz */
+
+/*
+ * For 16 MBit, refresh rates could be 31.3 us
+ * (= 64 ms / 2K = 125 / quad bursts).
+ * For a simpler initialization, 15.6 us is used instead.
+ *
+ * #define CFG_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks
+ * #define CFG_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank
+ */
+#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
+#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
+
+/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
+#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
+#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
+
+/*
+ * MAMR settings for SDRAM
+ */
+
+/* 8 column SDRAM */
+#define CFG_MAMR_8COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
+ MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
+ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
+/* 9 column SDRAM */
+#define CFG_MAMR_9COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
+ MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
+ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
+
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#define CONFIG_NET_MULTI
+#define CONFIG_SCC1_ENET
+#define CONFIG_FEC_ENET
+#define CONFIG_ETHPRIME "SCC ETHERNET"
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h
index 21b9d76..b933be9 100644
--- a/include/configs/ep8260.h
+++ b/include/configs/ep8260.h
@@ -283,6 +283,7 @@
~CFG_CMD_JFFS2 & \
~CFG_CMD_KGDB & \
~CFG_CMD_MII & \
+ ~CFG_CMD_MMC & \
~CFG_CMD_NAND & \
~CFG_CMD_PCI & \
~CFG_CMD_PCMCIA & \
diff --git a/include/configs/hymod.h b/include/configs/hymod.h
index df89715..e3a0ee3 100644
--- a/include/configs/hymod.h
+++ b/include/configs/hymod.h
@@ -148,6 +148,7 @@
CFG_CMD_JFFS2 | \
CFG_CMD_NAND | \
CFG_CMD_MII | \
+ CFG_CMD_MMC | \
CFG_CMD_PCMCIA | \
CFG_CMD_PCI | \
CFG_CMD_USB | \
diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h
index ba55af1..609ce33 100644
--- a/include/configs/lubbock.h
+++ b/include/configs/lubbock.h
@@ -18,7 +18,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -34,21 +34,24 @@
* If we are developing, we might want to start armboot from ram
* so we MUST NOT initialize critical regs like mem-timing ...
*/
-#define CONFIG_INIT_CRITICAL /* undef for developing */
+#define CONFIG_INIT_CRITICAL /* undef for developing */
/*
* High Level Configuration Options
* (easy to change)
*/
-#define CONFIG_PXA250 1 /* This is an PXA250 CPU */
-#define CONFIG_LUBBOCK 1 /* on an LUBBOCK Board */
+#define CONFIG_PXA250 1 /* This is an PXA250 CPU */
+#define CONFIG_LUBBOCK 1 /* on an LUBBOCK Board */
+#define CONFIG_LCD 1
+#define CONFIG_MMC 1
+#define BOARD_POST_INIT 1
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
/*
* Size of malloc() pool
*/
-#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
/*
* Hardware drivers
@@ -59,166 +62,176 @@
/*
* select serial console configuration
*/
-#define CONFIG_FFUART 1 /* we use FFUART on LUBBOCK */
+#define CONFIG_FFUART 1 /* we use FFUART on LUBBOCK */
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE 115200
+#define CONFIG_BAUDRATE 115200
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL)
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MMC | CFG_CMD_FAT)
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
-#define CONFIG_NETMASK 255.255.0.0
-#define CONFIG_IPADDR 192.168.0.21
-#define CONFIG_SERVERIP 192.168.0.250
-#define CONFIG_BOOTCOMMAND "bootm 40000"
-#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200"
-#define CONFIG_CMDLINE_TAG
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
+#define CONFIG_NETMASK 255.255.0.0
+#define CONFIG_IPADDR 192.168.0.21
+#define CONFIG_SERVERIP 192.168.0.250
+#define CONFIG_BOOTCOMMAND "bootm 40000"
+#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200"
+#define CONFIG_CMDLINE_TAG
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
* Miscellaneous configurable options
*/
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_HUSH_PARSER 1
+#define CFG_PROMPT_HUSH_PS2 "> "
+
+#define CFG_LONGHELP /* undef to save memory */
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT "$ " /* Monitor Command Prompt */
+#else
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#endif
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_DEVICE_NULLDEV 1
+
+#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
-#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */
-#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
-#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
+#define CFG_LOAD_ADDR 0xa8000000 /* default load address */
-#define CFG_LOAD_ADDR 0xa8000000 /* default load address */
+#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */
+#define CFG_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */
-#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */
-#define CFG_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */
+ /* valid baudrates */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
- /* valid baudrates */
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#define CFG_MMC_BASE 0xF0000000
/*
* Stack sizes
*
* The stack sizes are set up in start.S using the settings below
*/
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
+#define CONFIG_STACKSIZE (128*1024) /* regular stack */
#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
+#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
#endif
/*
* Physical Memory Map
*/
-#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */
-#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
-#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */
-#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */
-#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */
-#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */
-#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */
-#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */
-
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */
-#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */
-#define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */
-#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */
-
-#define CFG_DRAM_BASE 0xa0000000
-#define CFG_DRAM_SIZE 0x04000000
-
-#define CFG_FLASH_BASE PHYS_FLASH_1
+#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */
+#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
+#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */
+#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */
+#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */
+#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */
+#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */
+#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */
+
+#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
+#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */
+#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */
+#define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */
+#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */
+
+#define CFG_DRAM_BASE 0xa0000000
+#define CFG_DRAM_SIZE 0x04000000
+
+#define CFG_FLASH_BASE PHYS_FLASH_1
#define FPGA_REGS_BASE_PHYSICAL 0x08000000
/*
* GPIO settings
*/
-#define CFG_GPSR0_VAL 0x00008000
-#define CFG_GPSR1_VAL 0x00FC0382
-#define CFG_GPSR2_VAL 0x0001FFFF
-#define CFG_GPCR0_VAL 0x00000000
-#define CFG_GPCR1_VAL 0x00000000
-#define CFG_GPCR2_VAL 0x00000000
-#define CFG_GPDR0_VAL 0x0060A800
-#define CFG_GPDR1_VAL 0x00FF0382
-#define CFG_GPDR2_VAL 0x0001C000
-#define CFG_GAFR0_L_VAL 0x98400000
-#define CFG_GAFR0_U_VAL 0x00002950
-#define CFG_GAFR1_L_VAL 0x000A9558
-#define CFG_GAFR1_U_VAL 0x0005AAAA
-#define CFG_GAFR2_L_VAL 0xA0000000
-#define CFG_GAFR2_U_VAL 0x00000002
-
-#define CFG_PSSR_VAL 0x20
+#define CFG_GPSR0_VAL 0x00008000
+#define CFG_GPSR1_VAL 0x00FC0382
+#define CFG_GPSR2_VAL 0x0001FFFF
+#define CFG_GPCR0_VAL 0x00000000
+#define CFG_GPCR1_VAL 0x00000000
+#define CFG_GPCR2_VAL 0x00000000
+#define CFG_GPDR0_VAL 0x0060A800
+#define CFG_GPDR1_VAL 0x00FF0382
+#define CFG_GPDR2_VAL 0x0001C000
+#define CFG_GAFR0_L_VAL 0x98400000
+#define CFG_GAFR0_U_VAL 0x00002950
+#define CFG_GAFR1_L_VAL 0x000A9558
+#define CFG_GAFR1_U_VAL 0x0005AAAA
+#define CFG_GAFR2_L_VAL 0xA0000000
+#define CFG_GAFR2_U_VAL 0x00000002
+
+#define CFG_PSSR_VAL 0x20
/*
* Memory settings
*/
-#define CFG_MSC0_VAL 0x23F223F2
-#define CFG_MSC1_VAL 0x3FF1A441
-#define CFG_MSC2_VAL 0x7FF17FF1
-#define CFG_MDCNFG_VAL 0x00001AC9
-#define CFG_MDREFR_VAL 0x00018018
-#define CFG_MDMRS_VAL 0x00000000
+#define CFG_MSC0_VAL 0x23F223F2
+#define CFG_MSC1_VAL 0x3FF1A441
+#define CFG_MSC2_VAL 0x7FF97FF1
+#define CFG_MDCNFG_VAL 0x00001AC9
+#define CFG_MDREFR_VAL 0x00018018
+#define CFG_MDMRS_VAL 0x00000000
/*
* PCMCIA and CF Interfaces
*/
-#define CFG_MECR_VAL 0x00000000
-#define CFG_MCMEM0_VAL 0x00010504
-#define CFG_MCMEM1_VAL 0x00010504
-#define CFG_MCATT0_VAL 0x00010504
-#define CFG_MCATT1_VAL 0x00010504
-#define CFG_MCIO0_VAL 0x00004715
-#define CFG_MCIO1_VAL 0x00004715
+#define CFG_MECR_VAL 0x00000000
+#define CFG_MCMEM0_VAL 0x00010504
+#define CFG_MCMEM1_VAL 0x00010504
+#define CFG_MCATT0_VAL 0x00010504
+#define CFG_MCATT1_VAL 0x00010504
+#define CFG_MCIO0_VAL 0x00004715
+#define CFG_MCIO1_VAL 0x00004715
-#define _LED 0x08000010
-#define LED_BLANK (0x08000040)
+#define _LED 0x08000010
+#define LED_BLANK 0x08000040
/*
* FLASH and environment organization
*/
-#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
+#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
/* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT (25*CFG_HZ) /* Timeout for Flash Write */
+#define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT (25*CFG_HZ) /* Timeout for Flash Write */
/* FIXME */
-#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x1C000) /* Addr of Environment Sector */
-#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x1C000) /* Addr of Environment Sector */
+#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
/*
* FPGA Offsets
*/
-#define WHOAMI_OFFSET 0x00
-#define HEXLED_OFFSET 0x10
-#define BLANKLED_OFFSET 0x40
-#define DISCRETELED_OFFSET 0x40
-#define CNFG_SWITCHES_OFFSET 0x50
-#define USER_SWITCHES_OFFSET 0x60
-#define MISC_WR_OFFSET 0x80
-#define MISC_RD_OFFSET 0x90
-#define INT_MASK_OFFSET 0xC0
-#define INT_CLEAR_OFFSET 0xD0
-#define GP_OFFSET 0x100
-
-#endif /* __CONFIG_H */
+#define WHOAMI_OFFSET 0x00
+#define HEXLED_OFFSET 0x10
+#define BLANKLED_OFFSET 0x40
+#define DISCRETELED_OFFSET 0x40
+#define CNFG_SWITCHES_OFFSET 0x50
+#define USER_SWITCHES_OFFSET 0x60
+#define MISC_WR_OFFSET 0x80
+#define MISC_RD_OFFSET 0x90
+#define INT_MASK_OFFSET 0xC0
+#define INT_CLEAR_OFFSET 0xD0
+#define GP_OFFSET 0x100
+
+#endif /* __CONFIG_H */
diff --git a/include/fat.h b/include/fat.h
new file mode 100644
index 0000000..b56219c
--- /dev/null
+++ b/include/fat.h
@@ -0,0 +1,208 @@
+/*
+ * R/O (V)FAT 12/16/32 filesystem implementation by Marcus Sundberg
+ *
+ * 2002-07-28 - rjones@nexus-tech.net - ported to ppcboot v1.1.6
+ * 2003-03-10 - kharris@nexus-tech.net - ported to u-boot
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef _FAT_H_
+#define _FAT_H_
+
+#define CONFIG_SUPPORT_VFAT
+
+#define SECTOR_SIZE FS_BLOCK_SIZE
+
+#define FS_BLOCK_SIZE 512
+
+#if FS_BLOCK_SIZE != SECTOR_SIZE
+#error FS_BLOCK_SIZE != SECTOR_SIZE - This code needs to be fixed!
+#endif
+
+#define MAX_CLUSTSIZE 65536
+#define DIRENTSPERBLOCK (FS_BLOCK_SIZE/sizeof(dir_entry))
+#define DIRENTSPERCLUST ((mydata->clust_size*SECTOR_SIZE)/sizeof(dir_entry))
+
+#define FATBUFBLOCKS 6
+#define FATBUFSIZE (FS_BLOCK_SIZE*FATBUFBLOCKS)
+#define FAT12BUFSIZE ((FATBUFSIZE*3)/2)
+#define FAT16BUFSIZE (FATBUFSIZE/2)
+#define FAT32BUFSIZE (FATBUFSIZE/4)
+
+
+/* Filesystem identifiers */
+#define FAT12_SIGN "FAT12 "
+#define FAT16_SIGN "FAT16 "
+#define FAT32_SIGN "FAT32 "
+#define SIGNLEN 8
+
+/* File attributes */
+#define ATTR_RO 1
+#define ATTR_HIDDEN 2
+#define ATTR_SYS 4
+#define ATTR_VOLUME 8
+#define ATTR_DIR 16
+#define ATTR_ARCH 32
+
+#define ATTR_VFAT (ATTR_RO | ATTR_HIDDEN | ATTR_SYS | ATTR_VOLUME)
+
+#define DELETED_FLAG ((char)0xe5) /* Marks deleted files when in name[0] */
+#define aRING 0x05 /* Used to represent 'å' in name[0] */
+
+
+/* Flags telling whether we should read a file or list a directory */
+#define LS_NO 0
+#define LS_YES 1
+#define LS_DIR 1
+#define LS_ROOT 2
+
+#ifdef DEBUG
+#define FAT_DPRINT(args...) printf(args)
+#else
+#define FAT_DPRINT(args...)
+#endif
+#define FAT_ERROR(arg) printf(arg)
+
+#define ISDIRDELIM(c) ((c) == '/' || (c) == '\\')
+
+#define FSTYPE_NONE (-1)
+
+#if defined(__linux__) && defined(__KERNEL__)
+#define FAT2CPU16 le16_to_cpu
+#define FAT2CPU32 le32_to_cpu
+#else
+#if 1
+#define FAT2CPU16(x) (x)
+#define FAT2CPU32(x) (x)
+#else
+#define FAT2CPU16(x) ((((x) & 0x00ff) << 8) | (((x) & 0xff00) >> 8))
+#define FAT2CPU32(x) ((((x) & 0x000000ff) << 24) | \
+ (((x) & 0x0000ff00) << 8) | \
+ (((x) & 0x00ff0000) >> 8) | \
+ (((x) & 0xff000000) >> 24))
+#endif
+#endif
+
+#define TOLOWER(c) if((c) >= 'A' && (c) <= 'Z'){(c)+=('a' - 'A');}
+#define START(dent) (FAT2CPU16((dent)->start) \
+ + (mydata->fatsize != 32 ? 0 : \
+ (FAT2CPU16((dent)->starthi) << 16)))
+
+
+typedef struct boot_sector {
+ __u8 ignored[3]; /* Bootstrap code */
+ char system_id[8]; /* Name of fs */
+ __u8 sector_size[2]; /* Bytes/sector */
+ __u8 cluster_size; /* Sectors/cluster */
+ __u16 reserved; /* Number of reserved sectors */
+ __u8 fats; /* Number of FATs */
+ __u8 dir_entries[2]; /* Number of root directory entries */
+ __u8 sectors[2]; /* Number of sectors */
+ __u8 media; /* Media code */
+ __u16 fat_length; /* Sectors/FAT */
+ __u16 secs_track; /* Sectors/track */
+ __u16 heads; /* Number of heads */
+ __u32 hidden; /* Number of hidden sectors */
+ __u32 total_sect; /* Number of sectors (if sectors == 0) */
+
+ /* FAT32 only */
+ __u32 fat32_length; /* Sectors/FAT */
+ __u16 flags; /* Bit 8: fat mirroring, low 4: active fat */
+ __u8 version[2]; /* Filesystem version */
+ __u32 root_cluster; /* First cluster in root directory */
+ __u16 info_sector; /* Filesystem info sector */
+ __u16 backup_boot; /* Backup boot sector */
+ __u16 reserved2[6]; /* Unused */
+} boot_sector;
+
+typedef struct volume_info
+{
+ __u8 drive_number; /* BIOS drive number */
+ __u8 reserved; /* Unused */
+ __u8 ext_boot_sign; /* 0x29 if fields below exist (DOS 3.3+) */
+ __u8 volume_id[4]; /* Volume ID number */
+ char volume_label[11]; /* Volume label */
+ char fs_type[8]; /* Typically FAT12, FAT16, or FAT32 */
+ /* Boot code comes next, all but 2 bytes to fill up sector */
+ /* Boot sign comes last, 2 bytes */
+} volume_info;
+
+typedef struct dir_entry {
+ char name[8],ext[3]; /* Name and extension */
+ __u8 attr; /* Attribute bits */
+ __u8 lcase; /* Case for base and extension */
+ __u8 ctime_ms; /* Creation time, milliseconds */
+ __u16 ctime; /* Creation time */
+ __u16 cdate; /* Creation date */
+ __u16 adate; /* Last access date */
+ __u16 starthi; /* High 16 bits of cluster in FAT32 */
+ __u16 time,date,start;/* Time, date and first cluster */
+ __u32 size; /* File size in bytes */
+} dir_entry;
+
+typedef struct dir_slot {
+ __u8 id; /* Sequence number for slot */
+ __u8 name0_4[10]; /* First 5 characters in name */
+ __u8 attr; /* Attribute byte */
+ __u8 reserved; /* Unused */
+ __u8 alias_checksum;/* Checksum for 8.3 alias */
+ __u8 name5_10[12]; /* 6 more characters in name */
+ __u16 start; /* Unused */
+ __u8 name11_12[4]; /* Last 2 characters in name */
+} dir_slot;
+
+/* Private filesystem parameters */
+typedef struct {
+ int fatsize; /* Size of FAT in bits */
+ __u16 fatlength; /* Length of FAT in sectors */
+ __u16 fat_sect; /* Starting sector of the FAT */
+ __u16 rootdir_sect; /* Start sector of root directory */
+ __u16 clust_size; /* Size of clusters in sectors */
+ __u16 data_begin; /* The sector of the first cluster */
+ __u8 fatbuf[FATBUFSIZE]; /* Current FAT buffer */
+ int fatbufnum; /* Used by get_fatent, init to -1 */
+} fsdata;
+
+typedef int (file_detectfs_func)(void);
+typedef int (file_ls_func)(const char *dir);
+typedef long (file_read_func)(const char *filename, void *buffer,
+ unsigned long maxsize);
+
+struct filesystem {
+ file_detectfs_func *detect;
+ file_ls_func *ls;
+ file_read_func *read;
+ const char name[12];
+};
+
+/* FAT tables */
+file_detectfs_func file_fat_detectfs;
+file_ls_func file_fat_ls;
+file_read_func file_fat_read;
+
+/* Currently this doesn't check if the dir exists or is valid... */
+int file_cd(const char *path);
+int file_fat_detectfs(void);
+int file_fat_ls(const char *dir);
+long file_fat_read(const char *filename, void *buffer, unsigned long maxsize);
+const char *file_getfsname(int idx);
+
+#endif /* _FAT_H_ */
diff --git a/include/flash.h b/include/flash.h
index 6410f2f..882652d 100644
--- a/include/flash.h
+++ b/include/flash.h
@@ -158,6 +158,10 @@ extern int flash_real_protect(flash_info_t *info, long sector, int prot);
#define AMD_ID_DL324B 0x225F225F /* 29DL324B ID (32 M, bottom boot sect) */
#define AMD_ID_DL640 0x227E227E /* 29DL640D ID (64 M, dual boot sectors)*/
+#define AMD_ID_MIRROR 0x227E227E /* 1st ID word for MirrorBit family */
+#define AMD_ID_LV128U_2 0x22122212 /* 2d ID word for AM29LV128M at 0x38 */
+#define AMD_ID_LV128U_3 0x22002200 /* 3d ID word for AM29LV128M at 0x3c */
+
#define AMD_ID_LV640U 0x22D722D7 /* 29LV640U ID (64 M, uniform sectors) */
#define ATM_ID_BV1614 0x000000C0 /* 49BV1614 ID */
@@ -302,6 +306,7 @@ extern int flash_real_protect(flash_info_t *info, long sector, int prot);
#define FLASH_28F320C3B 0x009F /* Intel 28F320C3B ( 32M = 2M x 16 ) */
#define FLASH_28F640C3T 0x00A0 /* Intel 28F640C3T ( 64M = 4M x 16 ) */
#define FLASH_28F640C3B 0x00A1 /* Intel 28F640C3B ( 64M = 4M x 16 ) */
+#define FLASH_AMLV128U 0x00A2 /* AMD 29LV128M ( 128M = 8M x 16 ) */
#define FLASH_UNKNOWN 0xFFFF /* unknown flash type */
diff --git a/include/mmc.h b/include/mmc.h
new file mode 100644
index 0000000..a271695
--- /dev/null
+++ b/include/mmc.h
@@ -0,0 +1,33 @@
+/*
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _MMC_H_
+#define _MMC_H_
+#include <asm/arch/mmc.h>
+
+int mmc_init(int verbose);
+int mmc_read(ulong src, uchar *dst, int size);
+int mmc_write(uchar *src, ulong dst, int size);
+int mmc2info(ulong addr);
+
+#endif /* _MMC_H_ */
diff --git a/include/net.h b/include/net.h
index 689a90f..2a1d336 100644
--- a/include/net.h
+++ b/include/net.h
@@ -12,12 +12,14 @@
#ifndef __NET_H__
#define __NET_H__
-#if !defined(CONFIG_NET_MULTI) && defined(CONFIG_8xx)
+#if defined(CONFIG_8xx)
#include <commproc.h>
-#if defined(FEC_ENET) || defined(SCC_ENET)
-#define CONFIG_NET_MULTI
-#endif
-#endif
+# if !defined(CONFIG_NET_MULTI)
+# if defined(FEC_ENET) || defined(SCC_ENET)
+# define CONFIG_NET_MULTI
+# endif
+# endif
+#endif /* CONFIG_8xx */
#if !defined(CONFIG_NET_MULTI) && defined(CONFIG_8260)
#include <config.h>