summaryrefslogtreecommitdiff
path: root/include/sym53c8xx.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/sym53c8xx.h')
-rw-r--r--include/sym53c8xx.h583
1 files changed, 583 insertions, 0 deletions
diff --git a/include/sym53c8xx.h b/include/sym53c8xx.h
new file mode 100644
index 0000000..821e1f8
--- /dev/null
+++ b/include/sym53c8xx.h
@@ -0,0 +1,583 @@
+/*
+ * (C) Copyright 2001
+ * Denis Peter, MPL AG Switzerland
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ *
+ * Most of these definitions are derived from
+ * linux/drivers/scsi/sym53c8xx_defs.h
+ *
+ */
+
+#ifndef _SYM53C8XX_DEFS_H
+#define _SYM53C8XX_DEFS_H
+
+
+#define SCNTL0 0x00 /* full arb., ena parity, par->ATN */
+
+#define SCNTL1 0x01 /* no reset */
+ #define ISCON 0x10 /* connected to scsi */
+ #define CRST 0x08 /* force reset */
+ #define IARB 0x02 /* immediate arbitration */
+
+#define SCNTL2 0x02 /* no disconnect expected */
+ #define SDU 0x80 /* cmd: disconnect will raise error */
+ #define CHM 0x40 /* sta: chained mode */
+ #define WSS 0x08 /* sta: wide scsi send [W]*/
+ #define WSR 0x01 /* sta: wide scsi received [W]*/
+
+#define SCNTL3 0x03 /* cnf system clock dependent */
+ #define EWS 0x08 /* cmd: enable wide scsi [W]*/
+ #define ULTRA 0x80 /* cmd: ULTRA enable */
+ /* bits 0-2, 7 rsvd for C1010 */
+
+#define SCID 0x04 /* cnf host adapter scsi address */
+ #define RRE 0x40 /* r/w:e enable response to resel. */
+ #define SRE 0x20 /* r/w:e enable response to select */
+
+#define SXFER 0x05 /* ### Sync speed and count */
+ /* bits 6-7 rsvd for C1010 */
+
+#define SDID 0x06 /* ### Destination-ID */
+
+#define GPREG 0x07 /* ??? IO-Pins */
+
+#define SFBR 0x08 /* ### First byte in phase */
+
+#define SOCL 0x09
+ #define CREQ 0x80 /* r/w: SCSI-REQ */
+ #define CACK 0x40 /* r/w: SCSI-ACK */
+ #define CBSY 0x20 /* r/w: SCSI-BSY */
+ #define CSEL 0x10 /* r/w: SCSI-SEL */
+ #define CATN 0x08 /* r/w: SCSI-ATN */
+ #define CMSG 0x04 /* r/w: SCSI-MSG */
+ #define CC_D 0x02 /* r/w: SCSI-C_D */
+ #define CI_O 0x01 /* r/w: SCSI-I_O */
+
+#define SSID 0x0a
+
+#define SBCL 0x0b
+
+#define DSTAT 0x0c
+ #define DFE 0x80 /* sta: dma fifo empty */
+ #define MDPE 0x40 /* int: master data parity error */
+ #define BF 0x20 /* int: script: bus fault */
+ #define ABRT 0x10 /* int: script: command aborted */
+ #define SSI 0x08 /* int: script: single step */
+ #define SIR 0x04 /* int: script: interrupt instruct. */
+ #define IID 0x01 /* int: script: illegal instruct. */
+
+#define SSTAT0 0x0d
+ #define ILF 0x80 /* sta: data in SIDL register lsb */
+ #define ORF 0x40 /* sta: data in SODR register lsb */
+ #define OLF 0x20 /* sta: data in SODL register lsb */
+ #define AIP 0x10 /* sta: arbitration in progress */
+ #define LOA 0x08 /* sta: arbitration lost */
+ #define WOA 0x04 /* sta: arbitration won */
+ #define IRST 0x02 /* sta: scsi reset signal */
+ #define SDP 0x01 /* sta: scsi parity signal */
+
+#define SSTAT1 0x0e
+ #define FF3210 0xf0 /* sta: bytes in the scsi fifo */
+
+#define SSTAT2 0x0f
+ #define ILF1 0x80 /* sta: data in SIDL register msb[W]*/
+ #define ORF1 0x40 /* sta: data in SODR register msb[W]*/
+ #define OLF1 0x20 /* sta: data in SODL register msb[W]*/
+ #define DM 0x04 /* sta: DIFFSENS mismatch (895/6 only) */
+ #define LDSC 0x02 /* sta: disconnect & reconnect */
+
+#define DSA 0x10 /* --> Base page */
+#define DSA1 0x11
+#define DSA2 0x12
+#define DSA3 0x13
+
+#define ISTAT 0x14 /* --> Main Command and status */
+ #define CABRT 0x80 /* cmd: abort current operation */
+ #define SRST 0x40 /* mod: reset chip */
+ #define SIGP 0x20 /* r/w: message from host to ncr */
+ #define SEM 0x10 /* r/w: message between host + ncr */
+ #define CON 0x08 /* sta: connected to scsi */
+ #define INTF 0x04 /* sta: int on the fly (reset by wr)*/
+ #define SIP 0x02 /* sta: scsi-interrupt */
+ #define DIP 0x01 /* sta: host/script interrupt */
+
+
+#define CTEST0 0x18
+#define CTEST1 0x19
+#define CTEST2 0x1a
+ #define CSIGP 0x40
+ /* bits 0-2,7 rsvd for C1010 */
+
+#define CTEST3 0x1b
+ #define FLF 0x08 /* cmd: flush dma fifo */
+ #define CLF 0x04 /* cmd: clear dma fifo */
+ #define FM 0x02 /* mod: fetch pin mode */
+ #define WRIE 0x01 /* mod: write and invalidate enable */
+ /* bits 4-7 rsvd for C1010 */
+
+#define DFIFO 0x20
+#define CTEST4 0x21
+ #define BDIS 0x80 /* mod: burst disable */
+ #define MPEE 0x08 /* mod: master parity error enable */
+
+#define CTEST5 0x22
+ #define DFS 0x20 /* mod: dma fifo size */
+ /* bits 0-1, 3-7 rsvd for C1010 */
+#define CTEST6 0x23
+
+#define DBC 0x24 /* ### Byte count and command */
+#define DNAD 0x28 /* ### Next command register */
+#define DSP 0x2c /* --> Script Pointer */
+#define DSPS 0x30 /* --> Script pointer save/opcode#2 */
+
+#define SCRATCHA 0x34 /* Temporary register a */
+#define SCRATCHA1 0x35
+#define SCRATCHA2 0x36
+#define SCRATCHA3 0x37
+
+#define DMODE 0x38
+ #define BL_2 0x80 /* mod: burst length shift value +2 */
+ #define BL_1 0x40 /* mod: burst length shift value +1 */
+ #define ERL 0x08 /* mod: enable read line */
+ #define ERMP 0x04 /* mod: enable read multiple */
+ #define BOF 0x02 /* mod: burst op code fetch */
+ #define MAN 0x01 /* mod: manual start */
+
+#define DIEN 0x39
+#define SBR 0x3a
+
+#define DCNTL 0x3b /* --> Script execution control */
+ #define CLSE 0x80 /* mod: cache line size enable */
+ #define PFF 0x40 /* cmd: pre-fetch flush */
+ #define PFEN 0x20 /* mod: pre-fetch enable */
+ #define SSM 0x10 /* mod: single step mode */
+ #define IRQM 0x08 /* mod: irq mode (1 = totem pole !) */
+ #define STD 0x04 /* cmd: start dma mode */
+ #define IRQD 0x02 /* mod: irq disable */
+ #define NOCOM 0x01 /* cmd: protect sfbr while reselect */
+ /* bits 0-1 rsvd for C1010 */
+
+#define ADDER 0x3c
+
+#define SIEN 0x40 /* -->: interrupt enable */
+#define SIST 0x42 /* <--: interrupt status */
+ #define SBMC 0x1000/* sta: SCSI Bus Mode Change (895/6 only) */
+ #define STO 0x0400/* sta: timeout (select) */
+ #define GEN 0x0200/* sta: timeout (general) */
+ #define HTH 0x0100/* sta: timeout (handshake) */
+ #define MA 0x80 /* sta: phase mismatch */
+ #define CMP 0x40 /* sta: arbitration complete */
+ #define SEL 0x20 /* sta: selected by another device */
+ #define RSL 0x10 /* sta: reselected by another device*/
+ #define SGE 0x08 /* sta: gross error (over/underflow)*/
+ #define UDC 0x04 /* sta: unexpected disconnect */
+ #define RST 0x02 /* sta: scsi bus reset detected */
+ #define PAR 0x01 /* sta: scsi parity error */
+
+#define SLPAR 0x44
+#define SWIDE 0x45
+#define MACNTL 0x46
+#define GPCNTL 0x47
+#define STIME0 0x48 /* cmd: timeout for select&handshake*/
+#define STIME1 0x49 /* cmd: timeout user defined */
+#define RESPID 0x4a /* sta: Reselect-IDs */
+
+#define STEST0 0x4c
+
+#define STEST1 0x4d
+ #define SCLK 0x80 /* Use the PCI clock as SCSI clock */
+ #define DBLEN 0x08 /* clock doubler running */
+ #define DBLSEL 0x04 /* clock doubler selected */
+
+
+#define STEST2 0x4e
+ #define ROF 0x40 /* reset scsi offset (after gross error!) */
+ #define EXT 0x02 /* extended filtering */
+
+#define STEST3 0x4f
+ #define TE 0x80 /* c: tolerAnt enable */
+ #define HSC 0x20 /* c: Halt SCSI Clock */
+ #define CSF 0x02 /* c: clear scsi fifo */
+
+#define SIDL 0x50 /* Lowlevel: latched from scsi data */
+#define STEST4 0x52
+ #define SMODE 0xc0 /* SCSI bus mode (895/6 only) */
+ #define SMODE_HVD 0x40 /* High Voltage Differential */
+ #define SMODE_SE 0x80 /* Single Ended */
+ #define SMODE_LVD 0xc0 /* Low Voltage Differential */
+ #define LCKFRQ 0x20 /* Frequency Lock (895/6 only) */
+ /* bits 0-5 rsvd for C1010 */
+
+#define SODL 0x54 /* Lowlevel: data out to scsi data */
+
+#define SBDL 0x58 /* Lowlevel: data from scsi data */
+
+
+
+
+/*-----------------------------------------------------------
+**
+** Utility macros for the script.
+**
+**-----------------------------------------------------------
+*/
+
+#define REG(r) (r)
+
+/*-----------------------------------------------------------
+**
+** SCSI phases
+**
+** DT phases illegal for ncr driver.
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_DATA_OUT 0x00000000
+#define SCR_DATA_IN 0x01000000
+#define SCR_COMMAND 0x02000000
+#define SCR_STATUS 0x03000000
+#define SCR_DT_DATA_OUT 0x04000000
+#define SCR_DT_DATA_IN 0x05000000
+#define SCR_MSG_OUT 0x06000000
+#define SCR_MSG_IN 0x07000000
+
+#define SCR_ILG_OUT 0x04000000
+#define SCR_ILG_IN 0x05000000
+
+/*-----------------------------------------------------------
+**
+** Data transfer via SCSI.
+**
+**-----------------------------------------------------------
+**
+** MOVE_ABS (LEN)
+** <<start address>>
+**
+** MOVE_IND (LEN)
+** <<dnad_offset>>
+**
+** MOVE_TBL
+** <<dnad_offset>>
+**
+**-----------------------------------------------------------
+*/
+
+#define OPC_MOVE 0x08000000
+
+#define SCR_MOVE_ABS(l) ((0x00000000 | OPC_MOVE) | (l))
+#define SCR_MOVE_IND(l) ((0x20000000 | OPC_MOVE) | (l))
+#define SCR_MOVE_TBL (0x10000000 | OPC_MOVE)
+
+#define SCR_CHMOV_ABS(l) ((0x00000000) | (l))
+#define SCR_CHMOV_IND(l) ((0x20000000) | (l))
+#define SCR_CHMOV_TBL (0x10000000)
+
+
+/*-----------------------------------------------------------
+**
+** Selection
+**
+**-----------------------------------------------------------
+**
+** SEL_ABS | SCR_ID (0..15) [ | REL_JMP]
+** <<alternate_address>>
+**
+** SEL_TBL | << dnad_offset>> [ | REL_JMP]
+** <<alternate_address>>
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_SEL_ABS 0x40000000
+#define SCR_SEL_ABS_ATN 0x41000000
+#define SCR_SEL_TBL 0x42000000
+#define SCR_SEL_TBL_ATN 0x43000000
+
+
+#define SCR_JMP_REL 0x04000000
+#define SCR_ID(id) (((unsigned long)(id)) << 16)
+
+/*-----------------------------------------------------------
+**
+** Waiting for Disconnect or Reselect
+**
+**-----------------------------------------------------------
+**
+** WAIT_DISC
+** dummy: <<alternate_address>>
+**
+** WAIT_RESEL
+** <<alternate_address>>
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_WAIT_DISC 0x48000000
+#define SCR_WAIT_RESEL 0x50000000
+
+/*-----------------------------------------------------------
+**
+** Bit Set / Reset
+**
+**-----------------------------------------------------------
+**
+** SET (flags {|.. })
+**
+** CLR (flags {|.. })
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_SET(f) (0x58000000 | (f))
+#define SCR_CLR(f) (0x60000000 | (f))
+
+#define SCR_CARRY 0x00000400
+#define SCR_TRG 0x00000200
+#define SCR_ACK 0x00000040
+#define SCR_ATN 0x00000008
+
+
+
+
+/*-----------------------------------------------------------
+**
+** Memory to memory move
+**
+**-----------------------------------------------------------
+**
+** COPY (bytecount)
+** << source_address >>
+** << destination_address >>
+**
+** SCR_COPY sets the NO FLUSH option by default.
+** SCR_COPY_F does not set this option.
+**
+** For chips which do not support this option,
+** ncr_copy_and_bind() will remove this bit.
+**-----------------------------------------------------------
+*/
+
+#define SCR_NO_FLUSH 0x01000000
+
+#define SCR_COPY(n) (0xc0000000 | SCR_NO_FLUSH | (n))
+#define SCR_COPY_F(n) (0xc0000000 | (n))
+
+/*-----------------------------------------------------------
+**
+** Register move and binary operations
+**
+**-----------------------------------------------------------
+**
+** SFBR_REG (reg, op, data) reg = SFBR op data
+** << 0 >>
+**
+** REG_SFBR (reg, op, data) SFBR = reg op data
+** << 0 >>
+**
+** REG_REG (reg, op, data) reg = reg op data
+** << 0 >>
+**
+**-----------------------------------------------------------
+** On 810A, 860, 825A, 875, 895 and 896 chips the content
+** of SFBR register can be used as data (SCR_SFBR_DATA).
+** The 896 has additionnal IO registers starting at
+** offset 0x80. Bit 7 of register offset is stored in
+** bit 7 of the SCRIPTS instruction first DWORD.
+**-----------------------------------------------------------
+*/
+
+#define SCR_REG_OFS(ofs) ((((ofs) & 0x7f) << 16ul)) /* + ((ofs) & 0x80)) */
+
+#define SCR_SFBR_REG(reg,op,data) \
+ (0x68000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
+
+#define SCR_REG_SFBR(reg,op,data) \
+ (0x70000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
+
+#define SCR_REG_REG(reg,op,data) \
+ (0x78000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
+
+
+#define SCR_LOAD 0x00000000
+#define SCR_SHL 0x01000000
+#define SCR_OR 0x02000000
+#define SCR_XOR 0x03000000
+#define SCR_AND 0x04000000
+#define SCR_SHR 0x05000000
+#define SCR_ADD 0x06000000
+#define SCR_ADDC 0x07000000
+
+#define SCR_SFBR_DATA (0x00800000>>8ul) /* Use SFBR as data */
+
+/*-----------------------------------------------------------
+**
+** FROM_REG (reg) SFBR = reg
+** << 0 >>
+**
+** TO_REG (reg) reg = SFBR
+** << 0 >>
+**
+** LOAD_REG (reg, data) reg = <data>
+** << 0 >>
+**
+** LOAD_SFBR(data) SFBR = <data>
+** << 0 >>
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_FROM_REG(reg) \
+ SCR_REG_SFBR(reg,SCR_OR,0)
+
+#define SCR_TO_REG(reg) \
+ SCR_SFBR_REG(reg,SCR_OR,0)
+
+#define SCR_LOAD_REG(reg,data) \
+ SCR_REG_REG(reg,SCR_LOAD,data)
+
+#define SCR_LOAD_SFBR(data) \
+ (SCR_REG_SFBR (gpreg, SCR_LOAD, data))
+
+/*-----------------------------------------------------------
+**
+** LOAD from memory to register.
+** STORE from register to memory.
+**
+** Only supported by 810A, 860, 825A, 875, 895 and 896.
+**
+**-----------------------------------------------------------
+**
+** LOAD_ABS (LEN)
+** <<start address>>
+**
+** LOAD_REL (LEN) (DSA relative)
+** <<dsa_offset>>
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_REG_OFS2(ofs) (((ofs) & 0xff) << 16ul)
+#define SCR_NO_FLUSH2 0x02000000
+#define SCR_DSA_REL2 0x10000000
+
+#define SCR_LOAD_R(reg, how, n) \
+ (0xe1000000 | how | (SCR_REG_OFS2(REG(reg))) | (n))
+
+#define SCR_STORE_R(reg, how, n) \
+ (0xe0000000 | how | (SCR_REG_OFS2(REG(reg))) | (n))
+
+#define SCR_LOAD_ABS(reg, n) SCR_LOAD_R(reg, SCR_NO_FLUSH2, n)
+#define SCR_LOAD_REL(reg, n) SCR_LOAD_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2, n)
+#define SCR_LOAD_ABS_F(reg, n) SCR_LOAD_R(reg, 0, n)
+#define SCR_LOAD_REL_F(reg, n) SCR_LOAD_R(reg, SCR_DSA_REL2, n)
+
+#define SCR_STORE_ABS(reg, n) SCR_STORE_R(reg, SCR_NO_FLUSH2, n)
+#define SCR_STORE_REL(reg, n) SCR_STORE_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2,n)
+#define SCR_STORE_ABS_F(reg, n) SCR_STORE_R(reg, 0, n)
+#define SCR_STORE_REL_F(reg, n) SCR_STORE_R(reg, SCR_DSA_REL2, n)
+
+
+/*-----------------------------------------------------------
+**
+** Waiting for Disconnect or Reselect
+**
+**-----------------------------------------------------------
+**
+** JUMP [ | IFTRUE/IFFALSE ( ... ) ]
+** <<address>>
+**
+** JUMPR [ | IFTRUE/IFFALSE ( ... ) ]
+** <<distance>>
+**
+** CALL [ | IFTRUE/IFFALSE ( ... ) ]
+** <<address>>
+**
+** CALLR [ | IFTRUE/IFFALSE ( ... ) ]
+** <<distance>>
+**
+** RETURN [ | IFTRUE/IFFALSE ( ... ) ]
+** <<dummy>>
+**
+** INT [ | IFTRUE/IFFALSE ( ... ) ]
+** <<ident>>
+**
+** INT_FLY [ | IFTRUE/IFFALSE ( ... ) ]
+** <<ident>>
+**
+** Conditions:
+** WHEN (phase)
+** IF (phase)
+** CARRYSET
+** DATA (data, mask)
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_NO_OP 0x80000000
+#define SCR_JUMP 0x80080000
+#define SCR_JUMP64 0x80480000
+#define SCR_JUMPR 0x80880000
+#define SCR_CALL 0x88080000
+#define SCR_CALLR 0x88880000
+#define SCR_RETURN 0x90080000
+#define SCR_INT 0x98080000
+#define SCR_INT_FLY 0x98180000
+
+#define IFFALSE(arg) (0x00080000 | (arg))
+#define IFTRUE(arg) (0x00000000 | (arg))
+
+#define WHEN(phase) (0x00030000 | (phase))
+#define IF(phase) (0x00020000 | (phase))
+
+#define DATA(D) (0x00040000 | ((D) & 0xff))
+#define MASK(D,M) (0x00040000 | (((M ^ 0xff) & 0xff) << 8ul)|((D) & 0xff))
+
+#define CARRYSET (0x00200000)
+
+
+
+#define SIR_COMPLETE 0x10000000
+/* script errors */
+#define SIR_SEL_ATN_NO_MSG_OUT 0x00000001
+#define SIR_CMD_OUT_ILL_PH 0x00000002
+#define SIR_STATUS_ILL_PH 0x00000003
+#define SIR_MSG_RECEIVED 0x00000004
+#define SIR_DATA_IN_ERR 0x00000005
+#define SIR_DATA_OUT_ERR 0x00000006
+#define SIR_SCRIPT_ERROR 0x00000007
+#define SIR_MSG_OUT_NO_CMD 0x00000008
+#define SIR_MSG_OVER7 0x00000009
+/* Fly interrupt */
+#define INT_ON_FY 0x00000080
+
+/* Hardware errors are defined in scsi.h */
+
+#define SCSI_IDENTIFY 0xC0
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+#endif