summaryrefslogtreecommitdiff
path: root/include/configs
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs')
-rw-r--r--include/configs/mcc200.h29
-rw-r--r--include/configs/ml300.h18
-rw-r--r--include/configs/ml401.h109
-rw-r--r--include/configs/modnet50.h12
-rw-r--r--include/configs/motionpro.h40
-rw-r--r--include/configs/mp2usb.h62
-rw-r--r--include/configs/mpc7448hpc2.h39
-rw-r--r--include/configs/mx1ads.h20
-rw-r--r--include/configs/mx1fs2.h27
9 files changed, 167 insertions, 189 deletions
diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h
index c2324a0..10e25f0 100644
--- a/include/configs/mcc200.h
+++ b/include/configs/mcc200.h
@@ -40,11 +40,6 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
/*
* Serial console configuration
*
@@ -92,22 +87,21 @@
/* USB */
#define CONFIG_USB_OHCI
-#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT
#define CONFIG_USB_STORAGE
/* automatic software updates (see board/mcc200/auto_update.c) */
#define CONFIG_AUTO_UPDATE 1
+
/*
- * Supported commands
+ * Command line configuration.
*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- ADD_USB_CMD | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_FAT | \
- CFG_CMD_I2C)
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_USB
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
/*
* Autobooting
@@ -291,7 +285,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -307,6 +301,11 @@
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
/*
* Various low-level settings
*/
diff --git a/include/configs/ml300.h b/include/configs/ml300.h
index 6762cd6..423c6eb 100644
--- a/include/configs/ml300.h
+++ b/include/configs/ml300.h
@@ -87,13 +87,19 @@
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-#define REMOVE_COMMANDS (CFG_CMD_FLASH | CFG_CMD_LOADS | CFG_CMD_FAT | \
- CFG_CMD_IMLS )
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_NET) \
- & ~REMOVE_COMMANDS)
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_NET
+
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_FAT
+#undef CONFIG_CMD_IMLS
+
/* #define CONFIG_SYS_CLK_FREQ XPAR_CORE_CLOCK_FREQ_HZ */
/* 300000000 */
diff --git a/include/configs/ml401.h b/include/configs/ml401.h
index 3db2877..9537008 100644
--- a/include/configs/ml401.h
+++ b/include/configs/ml401.h
@@ -145,82 +145,45 @@
#define CFG_FLASH_PROTECTION /* hardware flash protection */
#endif /* !FLASH */
-#ifdef FLASH
- #ifdef RAMENV
- #define CONFIG_COMMANDS (CONFIG__CMD_DFL |\
- CFG_CMD_MEMORY |\
- CFG_CMD_MISC |\
- CFG_CMD_AUTOSCRIPT |\
- CFG_CMD_IRQ |\
- CFG_CMD_ASKENV |\
- CFG_CMD_BDI |\
- CFG_CMD_RUN |\
- CFG_CMD_LOADS |\
- CFG_CMD_LOADB |\
- CFG_CMD_IMI |\
- CFG_CMD_NET |\
- CFG_CMD_CACHE |\
- CFG_CMD_FAT |\
- CFG_CMD_EXT2 |\
- CFG_CMD_JFFS2 |\
- CFG_CMD_ECHO |\
- CFG_CMD_IMLS |\
- CFG_CMD_FLASH |\
- CFG_CMD_MFSL |\
- CFG_CMD_PING \
- )
- #else /* !RAMENV */
- #define CONFIG_COMMANDS (CONFIG__CMD_DFL |\
- CFG_CMD_MEMORY |\
- CFG_CMD_MISC |\
- CFG_CMD_AUTOSCRIPT |\
- CFG_CMD_IRQ |\
- CFG_CMD_ASKENV |\
- CFG_CMD_BDI |\
- CFG_CMD_RUN |\
- CFG_CMD_LOADS |\
- CFG_CMD_LOADB |\
- CFG_CMD_IMI |\
- CFG_CMD_NET |\
- CFG_CMD_CACHE |\
- CFG_CMD_IMLS |\
- CFG_CMD_FLASH |\
- CFG_CMD_PING |\
- CFG_CMD_ENV |\
- CFG_CMD_FAT |\
- CFG_CMD_EXT2 |\
- CFG_CMD_JFFS2 |\
- CFG_CMD_ECHO |\
- CFG_CMD_MFSL |\
- CFG_CMD_SAVES \
- )
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_AUTOSCRIPT
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_MFSL
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_RUN
+
+#if defined(FLASH)
+ #define CONFIG_CMD_ECHO
+ #define CONFIG_CMD_FLASH
+ #define CONFIG_CMD_IMLS
+ #define CONFIG_CMD_JFFS2
+
+ #if !defined(RAMENV)
+ #define CONFIG_CMD_ENV
+ #define CONFIG_CMD_SAVES
#endif
+#endif
+
+
-#else /* !FLASH */
- #define CONFIG_COMMANDS (CONFIG__CMD_DFL |\
- CFG_CMD_MEMORY |\
- CFG_CMD_MISC |\
- CFG_CMD_AUTOSCRIPT |\
- CFG_CMD_IRQ |\
- CFG_CMD_ASKENV |\
- CFG_CMD_BDI |\
- CFG_CMD_RUN |\
- CFG_CMD_LOADS |\
- CFG_CMD_FAT |\
- CFG_CMD_EXT2 |\
- CFG_CMD_LOADB |\
- CFG_CMD_IMI |\
- CFG_CMD_NET |\
- CFG_CMD_CACHE |\
- CFG_CMD_MFSL |\
- CFG_CMD_PING \
- )
-#endif /* !FLASH */
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
-#if (CONFIG_COMMANDS & CFG_CMD_JFFS2)
+#if defined(CONFIG_CMD_JFFS2)
/* JFFS2 partitions */
#define CONFIG_JFFS2_CMDLINE /* mtdparts command line support */
#define MTDIDS_DEFAULT "nor0=ml401-0"
diff --git a/include/configs/modnet50.h b/include/configs/modnet50.h
index 2028767..33ae43e 100644
--- a/include/configs/modnet50.h
+++ b/include/configs/modnet50.h
@@ -65,10 +65,14 @@
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_JFFS2))
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_JFFS2
+
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_IPADDR 192.168.30.2
@@ -81,7 +85,7 @@
#define CONFIG_BOOTCOMMAND "bootm 0x10020000 0x100a0000"
#define CONFIG_BOOTARGS "console=ttyS0,38400 initrd=0x100a0040,530K root=/dev/ram keepinitrd"
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h
index e3899a5..7a61e49 100644
--- a/include/configs/motionpro.h
+++ b/include/configs/motionpro.h
@@ -37,28 +37,26 @@
/*
- * Supported commands
+ * Command line configuration.
*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DHCP | \
- CFG_CMD_REGINFO | \
- CFG_CMD_IMMAP | \
- CFG_CMD_ELF | \
- CFG_CMD_MII | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_NET | \
- CFG_CMD_PING | \
- CFG_CMD_IDE | \
- CFG_CMD_FAT | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_I2C | \
- CFG_CMD_DATE | \
- CFG_CMD_EEPROM | \
- CFG_CMD_DTT)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_DTT
/*
diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h
index 04f1f24..3a62240 100644
--- a/include/configs/mp2usb.h
+++ b/include/configs/mp2usb.h
@@ -123,36 +123,44 @@
#define CONFIG_BOOTDELAY 3
-#ifdef CONFIG_HARD_I2C
-#define CONFIG_COMMANDS \
- ((CONFIG_CMD_DFL | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP | \
- CFG_CMD_MISC))
-#else
-#define CONFIG_COMMANDS \
- ((CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP | \
- CFG_CMD_USB | \
- CFG_CMD_CACHE) & \
- ~(CFG_CMD_BDI | \
- CFG_CMD_IMI | \
- CFG_CMD_AUTOSCRIPT | \
- CFG_CMD_FPGA | \
- CFG_CMD_MISC | \
- CFG_CMD_LOADS ))
+
+#if !defined(CONFIG_HARD_I2C)
#define CONFIG_TIMESTAMP
#endif
-#define CFG_LONGHELP
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+
+#if defined(CONFIG_HARD_I2C)
+
+ #define CONFIG_CMD_DATE
+ #define CONFIG_CMD_EEPROM
+ #define CONFIG_CMD_I2C
+ #define CONFIG_CMD_MISC
+
+#else
+
+ #define CONFIG_CMD_USB
+ #define CONFIG_CMD_CACHE
+
+ #undef CONFIG_CMD_AUTOSCRIPT
+ #undef CONFIG_CMD_BDI
+ #undef CONFIG_CMD_FPGA
+ #undef CONFIG_CMD_IMI
+ #undef CONFIG_CMD_LOADS
+ #undef CONFIG_CMD_MISC
+
+#endif
+
+
+#define CFG_LONGHELP
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM 0x20000000
diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h
index 243a3f6..36ce9bf 100644
--- a/include/configs/mpc7448hpc2.h
+++ b/include/configs/mpc7448hpc2.h
@@ -149,22 +149,25 @@
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
CONFIG_BOOTP_BOOTFILESIZE)
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_ASKENV \
- | CFG_CMD_CACHE \
- | CFG_CMD_PCI \
- | CFG_CMD_I2C \
- | CFG_CMD_SDRAM \
- | CFG_CMD_EEPROM \
- | CFG_CMD_FLASH \
- | CFG_CMD_ENV \
- | CFG_CMD_BSP \
- | CFG_CMD_DHCP \
- | CFG_CMD_PING \
- | CFG_CMD_DATE)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DATE
+
/*set date in u-boot*/
#define CONFIG_RTC_M48T35A
@@ -182,7 +185,7 @@
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */
#else
@@ -387,7 +390,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h
index 7f3dfd5..0ae2780 100644
--- a/include/configs/mx1ads.h
+++ b/include/configs/mx1ads.h
@@ -78,25 +78,23 @@
#define CONFIG_BAUDRATE 115200
-/***********************************************************
- * Command definition
- ***********************************************************/
-#define CONFIG_COMMANDS \
- (CONFIG_CMD_DFL | \
- CFG_CMD_CACHE | \
- CFG_CMD_REGINFO | \
- CFG_CMD_ELF)
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_ELF
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTARGS "root=/dev/msdk mem=48M"
#define CONFIG_BOOTFILE "mx1ads"
#define CONFIG_BOOTCOMMAND "tftp; bootm"
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
/* what's this ? it's not used anywhere */
#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
diff --git a/include/configs/mx1fs2.h b/include/configs/mx1fs2.h
index 9816be8..47ca0f1 100644
--- a/include/configs/mx1fs2.h
+++ b/include/configs/mx1fs2.h
@@ -34,22 +34,21 @@
#undef _CONFIG_UART4 /* internal uart 4 */
#undef CONFIG_SILENT_CONSOLE /* use this to disable output */
+
/*
- * Definition of u-boot build in commands. Check out CONFIG_CMD_DFL if
- * neccessary in include/cmd_confdefs.h file. (Un)comment for getting
- * functionality or size of u-boot code.
+ * Command line configuration.
*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- & ~CFG_CMD_LOADS \
- & ~CFG_CMD_CONSOLE \
- & ~CFG_CMD_AUTOSCRIPT \
- & ~CFG_CMD_NET \
- & ~CFG_CMD_PING \
- & ~CFG_CMD_DHCP \
- | CFG_CMD_JFFS2 \
- )
-
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_JFFS2
+
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_CONSOLE
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_PING
+#undef CONFIG_CMD_DHCP
+
/*
* Boot options. Setting delay to -1 stops autostart count down.