diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/IceCube.h | 4 | ||||
| -rw-r--r-- | include/configs/TOP5200.h | 78 | ||||
| -rw-r--r-- | include/configs/csb272.h | 2 |
3 files changed, 75 insertions, 9 deletions
diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h index 3538e1c..39a91424 100644 --- a/include/configs/IceCube.h +++ b/include/configs/IceCube.h @@ -305,8 +305,8 @@ * USB stuff *----------------------------------------------------------------------- */ -#define CONFIG_USB_CDMFDC5xxx 0x0001BBBB -#define CONFIG_USB_GPSCFG5xxx 0x00001000 +#define CONFIG_USB_CLOCK 0x0001BBBB +#define CONFIG_USB_CONFIG 0x00001000 /*----------------------------------------------------------------------- * IDE/ATA stuff Supports IDE harddisk diff --git a/include/configs/TOP5200.h b/include/configs/TOP5200.h index ae4677d..930ed27 100644 --- a/include/configs/TOP5200.h +++ b/include/configs/TOP5200.h @@ -63,7 +63,7 @@ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } -#ifdef CONFIG_EVAL5200 /* PCI is supported with Evaluation board only */ +#if defined (CONFIG_EVAL5200) || defined (CONFIG_LITE5200) /* * PCI Mapping: * 0x40000000 - 0x4fffffff - PCI Memory @@ -89,11 +89,41 @@ #endif +/* USB */ +#if defined (CONFIG_EVAL5200) || defined (CONFIG_LITE5200) + +# define CONFIG_USB_OHCI +# define CONFIG_USB_CLOCK 0x0001bbbb +# define CONFIG_USB_CONFIG 0x00005000 +# define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT +# define CONFIG_DOS_PARTITION +# define CONFIG_USB_STORAGE + +#else + +# define ADD_USB_CMD 0 + +#endif + +/* IDE */ +#if defined (CONFIG_EVAL5200) || defined (CONFIG_LITE5200) + +# define ADD_IDE_CMD CFG_CMD_IDE | CFG_CMD_FAT +# define CONFIG_DOS_PARTITION + +#else + +# define ADD_IDE_CMD 0 + +#endif + /* * Supported commands */ #define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ ADD_PCI_CMD | \ + ADD_USB_CMD | \ + ADD_IDE_CMD | \ CFG_CMD_ASKENV | \ CFG_CMD_DATE | \ CFG_CMD_DHCP | \ @@ -110,11 +140,13 @@ #include <cmd_confdefs.h> /* - * low boot + * MUST be low boot - HIGHBOOT is not supported anymore */ #if (TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */ # define CFG_LOWBOOT 1 # define CFG_LOWBOOT16 1 +#else +# error "TEXT_BASE must be 0xff000000" #endif /* @@ -168,7 +200,7 @@ #define CONFIG_MISC_INIT_R #undef CONFIG_HARD_I2C /* I2C with hardware support */ -#define CONFIG_SOFT_I2C 1 +#define CONFIG_SOFT_I2C 1 /* I2C with softwate support */ #if defined (CONFIG_SOFT_I2C) # define SDA0 0x40 @@ -187,12 +219,16 @@ # define I2C_TRISTATE {DDR0&=~SDA0;} # define CFG_I2C_SPEED 100000 # define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_EEPROM_ADDR 0x57 +#define CFG_I2C_FACT_ADDR 0x57 #endif #if defined (CONFIG_HARD_I2C) # define CFG_I2C_MODULE 2 /* Select I2C module #1 or #2 */ # define CFG_I2C_SPEED 100000 /* 100 kHz */ # define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_EEPROM_ADDR 0x54 +#define CFG_I2C_FACT_ADDR 0x54 #endif /* @@ -242,14 +278,12 @@ #define CFG_ENV_IS_IN_EEPROM 1 /* turn on EEPROM env feature */ #define CFG_ENV_OFFSET 0x1000 #define CFG_ENV_SIZE 0x0700 -#define CFG_I2C_EEPROM_ADDR 0x57 /* * VPD settings */ #define CFG_FACT_OFFSET 0x1800 #define CFG_FACT_SIZE 0x0800 -#define CFG_I2C_FACT_ADDR 0x57 /* * Memory map @@ -310,7 +344,7 @@ #define CFG_MEMTEST_START 0x00100000 /* memtest works on */ #define CFG_MEMTEST_END 0x01f00000 /* 1 ... 31 MB in DRAM */ -#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_LOAD_ADDR 0x200000 /* default load address */ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ @@ -345,4 +379,36 @@ #define CFG_RESET_ADDRESS 0x7f000000 +/*----------------------------------------------------------------------- + * IDE/ATA stuff Supports IDE harddisk + *----------------------------------------------------------------------- + */ + +#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ + +#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ +#undef CONFIG_IDE_LED /* LED for ide not supported */ + +#define CONFIG_IDE_RESET 1 +#define CONFIG_IDE_PREINIT + +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ + +#define CFG_ATA_IDE0_OFFSET 0x0000 + +#define CFG_ATA_BASE_ADDR MPC5XXX_ATA + +/* Offset for data I/O */ +#define CFG_ATA_DATA_OFFSET (0x0060) + +/* Offset for normal register accesses */ +#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET) + +/* Offset for alternate registers */ +#define CFG_ATA_ALT_OFFSET (0x005c) + +/* Interval between registers */ +#define CFG_ATA_STRIDE 4 + #endif /* __CONFIG_H */ diff --git a/include/configs/csb272.h b/include/configs/csb272.h index 7457760..edec868 100644 --- a/include/configs/csb272.h +++ b/include/configs/csb272.h @@ -36,7 +36,7 @@ #define CONFIG_405GP 1 /* This is a PPC405GP CPU */ #define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_CSB272 1 /* on a Cogent CSB272 board */ -#define CONFIG_BOARD_PRE_INIT 1 /* Call board_pre_init() */ +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f() */ #define CONFIG_LAST_STAGE_INIT 1 /* Call last_stage_init() */ #define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */ |