summaryrefslogtreecommitdiff
path: root/include/configs
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs')
-rw-r--r--include/configs/MPC8260ADS.h98
1 files changed, 95 insertions, 3 deletions
diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h
index 98a063a..61a1c27 100644
--- a/include/configs/MPC8260ADS.h
+++ b/include/configs/MPC8260ADS.h
@@ -13,6 +13,10 @@
* Ported to PQ2FADS-ZU and PQ2FADS-VR boards.
* Ported to MPC8272ADS board.
*
+ * Copyright (c) 2005 MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ * Added support for PCI bridge on MPC8272ADS
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
@@ -173,6 +177,15 @@
#endif
#endif /* CONFIG_ADSTYPE >= CFG_PQ2FADS */
+/*PCI*/
+#ifdef CONFIG_MPC8272
+#define CONFIG_PCI
+#define CONFIG_PCI_PNP
+#define CONFIG_PCI_BOOTDELAY 0
+#define CONFIG_PCI_SCAN_SHOW
+#endif
+
+
#ifndef CONFIG_SDRAM_PBI
#define CONFIG_SDRAM_PBI 0 /* By default, use bank-based interleaving */
#endif
@@ -205,7 +218,6 @@
CFG_CMD_KGDB | \
CFG_CMD_MMC | \
CFG_CMD_NAND | \
- CFG_CMD_PCI | \
CFG_CMD_PCMCIA | \
CFG_CMD_REISER | \
CFG_CMD_SCSI | \
@@ -216,14 +228,21 @@
CFG_CMD_VFD | \
CFG_CMD_XIMG
-#if CONFIG_ADSTYPE >= CFG_PQ2FADS
+#if CONFIG_ADSTYPE == CFG_8272ADS
+#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \
+ CFG_CMD_SDRAM | \
+ CFG_CMD_I2C | \
+ CFG_EXCLUDE ) )
+#elif CONFIG_ADSTYPE >= CFG_PQ2FADS
#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \
CFG_CMD_SDRAM | \
CFG_CMD_I2C | \
+ CFG_CMD_PCI | \
CFG_EXCLUDE ) )
#else
#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \
- CFG_EXCLUDE ) )
+ CMD_CFG_PCI | \
+ CFG_EXCLUDE ) )
#endif /* CONFIG_ADSTYPE >= CFG_PQ2FADS */
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
@@ -295,6 +314,9 @@
#define CFG_IMMR 0xF0000000
#define CFG_BCSR 0xF4500000
+#if CONFIG_ADSTYPE == CFG_8272ADS
+#define CFG_PCI_INT 0xF8200000
+#endif
#define CFG_SDRAM_BASE 0x00000000
#define CFG_LSDRAM_BASE 0xFD000000
@@ -385,6 +407,13 @@
#define CFG_BR1_PRELIM CFG_BCSR | 0x00001801
#define CFG_OR1_PRELIM 0xFFFF8010
+/*We need to configure chip select to use CPLD PCI IC on MPC8272ADS*/
+
+#if CONFIG_ADSTYPE == CFG_8272ADS
+#define CFG_BR3_PRELIM (CFG_PCI_INT | 0x1801) /* PCI interrupt controller */
+#define CFG_OR3_PRELIM 0xFFFF8010
+#endif
+
#define CFG_RMR RMR_CSRE
#define CFG_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
#define CFG_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE)
@@ -417,4 +446,67 @@
#define CFG_RESET_ADDRESS 0x04400000
+#if CONFIG_ADSTYPE == CFG_8272ADS
+
+/* PCI Memory map (if different from default map */
+#define CFG_PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE /* Local base */
+#define CFG_PCI_SLV_MEM_BUS 0x00000000 /* PCI base */
+#define CFG_PICMR0_MASK_ATTRIB (PICMR_MASK_512MB | PICMR_ENABLE | \
+ PICMR_PREFETCH_EN)
+
+/*
+ * These are the windows that allow the CPU to access PCI address space.
+ * All three PCI master windows, which allow the CPU to access PCI
+ * prefetch, non prefetch, and IO space (see below), must all fit within
+ * these windows.
+ */
+
+
+
+/*
+ * Master window that allows the CPU to access PCI Memory (prefetch).
+ * This window will be setup with the second set of Outbound ATU registers
+ * in the bridge.
+ */
+
+#define CFG_PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */
+#define CFG_PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */
+#define CFG_CPU_PCI_MEM_START PCI_MSTR_MEM_LOCAL
+#define CFG_PCI_MSTR_MEM_SIZE 0x20000000 /* 512MB */
+#define CFG_POCMR0_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE | POCMR_PREFETCH_EN)
+
+/*
+ * Master window that allows the CPU to access PCI Memory (non-prefetch).
+ * This window will be setup with the second set of Outbound ATU registers
+ * in the bridge.
+ */
+
+#define CFG_PCI_MSTR_MEMIO_LOCAL 0xA0000000 /* Local base */
+#define CFG_PCI_MSTR_MEMIO_BUS 0xA0000000 /* PCI base */
+#define CFG_CPU_PCI_MEMIO_START PCI_MSTR_MEMIO_LOCAL
+#define CFG_PCI_MSTR_MEMIO_SIZE 0x20000000 /* 512MB */
+#define CFG_POCMR1_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE)
+
+/*
+ * Master window that allows the CPU to access PCI IO space.
+ * This window will be setup with the first set of Outbound ATU registers
+ * in the bridge.
+ */
+
+#define CFG_PCI_MSTR_IO_LOCAL 0xF6000000 /* Local base */
+#define CFG_PCI_MSTR_IO_BUS 0x00000000 /* PCI base */
+#define CFG_CPU_PCI_IO_START PCI_MSTR_IO_LOCAL
+#define CFG_PCI_MSTR_IO_SIZE 0x02000000 /* 64MB */
+#define CFG_POCMR2_MASK_ATTRIB (POCMR_MASK_32MB | POCMR_ENABLE | POCMR_PCI_IO)
+
+
+/* PCIBR0 - for PCI IO*/
+#define CFG_PCI_MSTR0_LOCAL CFG_PCI_MSTR_IO_LOCAL /* Local base */
+#define CFG_PCIMSK0_MASK ~(CFG_PCI_MSTR_IO_SIZE - 1U) /* Size of window */
+/* PCIBR1 - prefetch and non-prefetch regions joined together */
+#define CFG_PCI_MSTR1_LOCAL CFG_PCI_MSTR_MEM_LOCAL
+#define CFG_PCIMSK1_MASK ~(CFG_PCI_MSTR_MEM_SIZE + CFG_PCI_MSTR_MEMIO_SIZE - 1U)
+
+#endif /* CONFIG_ADSTYPE == CONFIG_8272ADS*/
+
#endif /* __CONFIG_H */