diff options
Diffstat (limited to 'include/configs/strider.h')
-rw-r--r-- | include/configs/strider.h | 67 |
1 files changed, 62 insertions, 5 deletions
diff --git a/include/configs/strider.h b/include/configs/strider.h index 5803b66..20ffc0c 100644 --- a/include/configs/strider.h +++ b/include/configs/strider.h @@ -22,6 +22,8 @@ #ifdef CONFIG_STRIDER_CPU #define CONFIG_IDENT_STRING " strider cpu 0.01" +#elif defined(CONFIG_STRIDER_CON_DP) +#define CONFIG_IDENT_STRING " strider con dp 0.01" #else #define CONFIG_IDENT_STRING " strider con 0.01" #endif @@ -225,15 +227,11 @@ /* * FLASH on the Local Bus */ -#if 1 #define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ #define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT #define CONFIG_FLASH_CFI_LEGACY #define CONFIG_SYS_FLASH_LEGACY_512Kx16 -#else -#define CONFIG_SYS_NO_FLASH -#endif #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */ #define CONFIG_SYS_FLASH_SIZE 8 /* FLASH size is up to 8M */ @@ -341,6 +339,22 @@ #define CONFIG_SYS_I2C_IHS_SPEED_3 50000 #define CONFIG_SYS_I2C_IHS_SLAVE_3 0x7F +#ifdef CONFIG_STRIDER_CON_DP +#define CONFIG_SYS_I2C_IHS_DUAL +#define CONFIG_SYS_I2C_IHS_CH0_1 +#define CONFIG_SYS_I2C_IHS_SPEED_0_1 50000 +#define CONFIG_SYS_I2C_IHS_SLAVE_0_1 0x7F +#define CONFIG_SYS_I2C_IHS_CH1_1 +#define CONFIG_SYS_I2C_IHS_SPEED_1_1 50000 +#define CONFIG_SYS_I2C_IHS_SLAVE_1_1 0x7F +#define CONFIG_SYS_I2C_IHS_CH2_1 +#define CONFIG_SYS_I2C_IHS_SPEED_2_1 50000 +#define CONFIG_SYS_I2C_IHS_SLAVE_2_1 0x7F +#define CONFIG_SYS_I2C_IHS_CH3_1 +#define CONFIG_SYS_I2C_IHS_SPEED_3_1 50000 +#define CONFIG_SYS_I2C_IHS_SLAVE_3_1 0x7F +#endif + /* * Software (bit-bang) I2C driver configuration */ @@ -357,7 +371,7 @@ #define I2C_SOFT_DECLARATIONS4 #define CONFIG_SYS_I2C_SOFT_SPEED_4 50000 #define CONFIG_SYS_I2C_SOFT_SLAVE_4 0x7F -#ifdef CONFIG_STRIDER_CON +#if defined(CONFIG_STRIDER_CON) || defined(CONFIG_STRIDER_CON_DP) #define I2C_SOFT_DECLARATIONS5 #define CONFIG_SYS_I2C_SOFT_SPEED_5 50000 #define CONFIG_SYS_I2C_SOFT_SLAVE_5 0x7F @@ -371,6 +385,20 @@ #define CONFIG_SYS_I2C_SOFT_SPEED_8 50000 #define CONFIG_SYS_I2C_SOFT_SLAVE_8 0x7F #endif +#ifdef CONFIG_STRIDER_CON_DP +#define I2C_SOFT_DECLARATIONS9 +#define CONFIG_SYS_I2C_SOFT_SPEED_9 50000 +#define CONFIG_SYS_I2C_SOFT_SLAVE_9 0x7F +#define I2C_SOFT_DECLARATIONS10 +#define CONFIG_SYS_I2C_SOFT_SPEED_10 50000 +#define CONFIG_SYS_I2C_SOFT_SLAVE_10 0x7F +#define I2C_SOFT_DECLARATIONS11 +#define CONFIG_SYS_I2C_SOFT_SPEED_11 50000 +#define CONFIG_SYS_I2C_SOFT_SLAVE_11 0x7F +#define I2C_SOFT_DECLARATIONS12 +#define CONFIG_SYS_I2C_SOFT_SPEED_12 50000 +#define CONFIG_SYS_I2C_SOFT_SLAVE_12 0x7F +#endif #ifdef CONFIG_STRIDER_CON #define CONFIG_SYS_ICS8N3QV01_I2C {5, 6, 7, 8} @@ -379,6 +407,13 @@ #define CONFIG_SYS_DP501_I2C {1, 2, 3, 4} #define CONFIG_STRIDER_FANS { {10, 0x4c}, {11, 0x4c}, \ {12, 0x4c} } +#elif defined(CONFIG_STRIDER_CON_DP) +#define CONFIG_SYS_ICS8N3QV01_I2C {13, 14, 15, 16, 17, 18, 19, 20} +#define CONFIG_SYS_CH7301_I2C {1, 3, 5, 7} +#define CONFIG_SYS_ADV7611_I2C {1, 3, 5, 7} +#define CONFIG_SYS_DP501_I2C {1, 3, 5, 7, 2, 4, 6, 8} +#define CONFIG_STRIDER_FANS { {10, 0x4c}, {11, 0x4c}, \ + {12, 0x4c} } #else #define CONFIG_SYS_CH7301_I2C {1, 2, 3, 4} #define CONFIG_SYS_ADV7611_I2C {1, 2, 3, 4} @@ -391,6 +426,8 @@ void fpga_gpio_set(unsigned int bus, int pin); void fpga_gpio_clear(unsigned int bus, int pin); int fpga_gpio_get(unsigned int bus, int pin); +void fpga_control_set(unsigned int bus, int pin); +void fpga_control_clear(unsigned int bus, int pin); #endif #ifdef CONFIG_STRIDER_CON @@ -398,12 +435,28 @@ int fpga_gpio_get(unsigned int bus, int pin); #define I2C_SCL_GPIO ((I2C_ADAP_HWNR > 3) ? 0x0100 : 0x0020) #define I2C_FPGA_IDX ((I2C_ADAP_HWNR > 3) ? \ (I2C_ADAP_HWNR - 4) : I2C_ADAP_HWNR) +#elif defined(CONFIG_STRIDER_CON_DP) +#define I2C_SDA_GPIO ((I2C_ADAP_HWNR > 3) ? 0x0040 : 0x0200) +#define I2C_SCL_GPIO ((I2C_ADAP_HWNR > 3) ? 0x0020 : 0x0100) +#define I2C_FPGA_IDX (I2C_ADAP_HWNR % 4) #else #define I2C_SDA_GPIO 0x0040 #define I2C_SCL_GPIO 0x0020 #define I2C_FPGA_IDX I2C_ADAP_HWNR #endif + +#ifdef CONFIG_STRIDER_CON_DP +#define I2C_ACTIVE \ + do { \ + if (I2C_ADAP_HWNR > 7) \ + fpga_control_set(I2C_FPGA_IDX, 0x0004); \ + else \ + fpga_control_clear(I2C_FPGA_IDX, 0x0004); \ + } while (0) +#else #define I2C_ACTIVE { } +#endif + #define I2C_TRISTATE { } #define I2C_READ \ (fpga_gpio_get(I2C_FPGA_IDX, I2C_SDA_GPIO) ? 1 : 0) @@ -436,6 +489,10 @@ int fpga_gpio_get(unsigned int bus, int pin); #define CONFIG_SYS_DP501_DIFFERENTIAL #define CONFIG_SYS_DP501_VCAPCTRL0 0x01 /* DDR mode 0, DE for H/VSYNC */ +#ifdef CONFIG_STRIDER_CON_DP +#define CONFIG_SYS_OSD_DH +#endif + /* * General PCI * Addresses are mapped 1-1. |