diff options
Diffstat (limited to 'include/configs/eNET.h')
| -rw-r--r-- | include/configs/eNET.h | 47 |
1 files changed, 31 insertions, 16 deletions
diff --git a/include/configs/eNET.h b/include/configs/eNET.h index 6a68bf4..361fe61 100644 --- a/include/configs/eNET.h +++ b/include/configs/eNET.h @@ -21,6 +21,7 @@ * MA 02111-1307 USA */ +#include <asm/ibmpc.h> /* * board/config.h - configuration options, board specific */ @@ -52,7 +53,27 @@ * bottom (processor) board MUST be removed! */ #undef CONFIG_WATCHDOG -#undef CONFIG_HW_WATCHDOG +#define CONFIG_HW_WATCHDOG + + /*----------------------------------------------------------------------- + * Serial Configuration + */ +#define CONFIG_SERIAL_MULTI +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK 1843200 +#define CONFIG_BAUDRATE 9600 +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} + +#define CONFIG_SYS_NS16550_COM1 UART0_BASE +#define CONFIG_SYS_NS16550_COM2 UART1_BASE +#define CONFIG_SYS_NS16550_COM3 (0x1000 + UART0_BASE) +#define CONFIG_SYS_NS16550_COM4 (0x1000 + UART1_BASE) +#define CONFIG_SYS_NS16550_PORT_MAPPED /*----------------------------------------------------------------------- * Video Configuration @@ -65,8 +86,6 @@ */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_BAUDRATE 9600 - /*----------------------------------------------------------------------- * Command line configuration. */ @@ -86,9 +105,10 @@ #define CONFIG_CMD_LOADS /* loads */ #define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop mtest */ #define CONFIG_CMD_MISC /* Misc functions like sleep etc*/ -#undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ +#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ #undef CONFIG_CMD_NFS /* NFS support */ #define CONFIG_CMD_PCI /* PCI support */ +#define CONFIG_CMD_PING /* ICMP echo support */ #define CONFIG_CMD_RUN /* run command in env variable */ #define CONFIG_CMD_SAVEENV /* saveenv */ #define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */ @@ -121,10 +141,7 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1024 /* incrementer freq: 1kHz */ - - /* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_SYS_HZ 1000 /* incrementer freq: 1kHz */ /*----------------------------------------------------------------------- * SDRAM Configuration @@ -143,7 +160,7 @@ * CPU Features */ #define CONFIG_SYS_SC520_HIGH_SPEED 0 /* 100 or 133MHz */ -#undef CONFIG_SYS_SC520_RESET /* use SC520 MMCR's to reset cpu */ +#define CONFIG_SYS_SC520_RESET /* use SC520 MMCR's to reset cpu */ #define CONFIG_SYS_SC520_TIMER /* use SC520 swtimers */ #undef CONFIG_SYS_GENERIC_TIMER /* use the i8254 PIT timers */ #undef CONFIG_SYS_TSC_TIMER /* use the Pentium TSC timers */ @@ -182,7 +199,7 @@ CONFIG_SYS_FLASH_BASE_1, \ CONFIG_SYS_FLASH_BASE_2} #define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#undef CONFIG_SYS_FLASH_USE_BUFFER_WRITE #define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT #define CONFIG_SYS_FLASH_LEGACY_512Kx8 @@ -210,13 +227,11 @@ #define CONFIG_SYS_THIRD_PCI_IRQ 11 #define CONFIG_SYS_FORTH_PCI_IRQ 15 -/*----------------------------------------------------------------------- - * Hardware watchdog configuration + /* + * Network device (TRL8100B) support */ -#define CONFIG_SYS_WATCHDOG_PIO_BIT 0x8000 -#define CONFIG_SYS_WATCHDIG_PIO_DATA SC520_PIODATA15_0 -#define CONFIG_SYS_WATCHDIG_PIO_CLR SC520_PIOCLR15_0 -#define CONFIG_SYS_WATCHDIG_PIO_SET SC520_PIOSET15_0 +#define CONFIG_NET_MULTI +#define CONFIG_RTL8139 /*----------------------------------------------------------------------- * FPGA configuration |