summaryrefslogtreecommitdiff
path: root/include/configs/KAREF.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/KAREF.h')
-rw-r--r--include/configs/KAREF.h309
1 files changed, 309 insertions, 0 deletions
diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h
new file mode 100644
index 0000000..331131a
--- /dev/null
+++ b/include/configs/KAREF.h
@@ -0,0 +1,309 @@
+/*
+ * (C) Copyright 2004 Sandburst Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * KAMINOREFDES.h - configuration for the Sandburst Kamino Reference
+ * design.
+ ***********************************************************************/
+
+/*
+ * $Id: KAREF.h,v 1.6 2005/06/03 15:05:25 tsawyer Exp $
+ *
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_KAREF 1 /* Board is Kamino Ref Variant */
+#define CONFIG_440GX 1 /* Specifc GX support */
+#define CONFIG_4xx 1 /* ... PPC4xx family */
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
+#define CONFIG_MISC_INIT_F 1 /* Call board misc_init_f */
+#define CONFIG_MISC_INIT_R 1 /* Call board misc_init_r */
+#undef CFG_DRAM_TEST /* Disable-takes long time!*/
+#define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */
+
+#define CONFIG_VERY_BIG_RAM 1
+#define CONFIG_VERSION_VARIABLE
+
+#define CONFIG_IDENT_STRING " Sandburst Kamino Reference Design"
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
+#define CFG_FLASH_BASE 0xfff80000 /* start of FLASH */
+#define CFG_MONITOR_BASE 0xfff80000 /* start of monitor */
+#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */
+#define CFG_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */
+#define CFG_ISRAM_BASE 0xc0000000 /* internal SRAM */
+#define CFG_PCI_BASE 0xd0000000 /* internal PCI regs */
+
+#define CFG_NVRAM_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x08000000)
+#define CFG_KAREF_FPGA_BASE (CFG_PERIPHERAL_BASE + 0x08200000)
+#define CFG_OFEM_FPGA_BASE (CFG_PERIPHERAL_BASE + 0x08400000)
+#define CFG_BME32_BASE (CFG_PERIPHERAL_BASE + 0x08500000)
+#define CFG_GPIO_BASE (CFG_PERIPHERAL_BASE + 0x00000700)
+
+/* Here for completeness */
+#define CFG_OFEMAC_BASE (CFG_PERIPHERAL_BASE + 0x08600000)
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer (placed in internal SRAM)
+ *----------------------------------------------------------------------*/
+#define CFG_TEMP_STACK_OCM 1
+#define CFG_OCM_DATA_ADDR CFG_ISRAM_BASE
+#define CFG_INIT_RAM_ADDR CFG_ISRAM_BASE /* Initial RAM address */
+#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */
+#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
+
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4)
+#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR
+
+#define CFG_MONITOR_LEN (256 * 1024) /* Rsrv 256kB for Mon */
+#define CFG_MALLOC_LEN (128 * 1024) /* Rsrv 128kB for malloc */
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CONFIG_SERIAL_MULTI 1
+#define CONFIG_BAUDRATE 9600
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * NVRAM/RTC
+ *
+ * NOTE: Upper 8 bytes of NVRAM is where the RTC registers are located.
+ * The DS1743 code assumes this condition (i.e. -- it assumes the base
+ * address for the RTC registers is:
+ *
+ * CFG_NVRAM_BASE_ADDR + CFG_NVRAM_SIZE
+ *
+ *----------------------------------------------------------------------*/
+#define CFG_NVRAM_SIZE (0x2000 - 8) /* NVRAM size(8k)- RTC regs*/
+#define CONFIG_RTC_DS174x 1 /* DS1743 RTC */
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
+#define CFG_MAX_FLASH_SECT 8 /* sectors per device */
+
+#undef CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT 120000 /* Flash Erase TO (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write TO(in ms) */
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup*/
+#define SPD_EEPROM_ADDRESS {0x53} /* SPD i2c spd addresses */
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C 1 /* I2C hardware support */
+#undef CONFIG_SOFT_I2C /* I2C !bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed 400kHz */
+#define CFG_I2C_SLAVE 0x7F /* I2C slave address */
+#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
+#define CONFIG_I2C_BUS1 1 /* Include i2c bus 1 supp */
+
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+#define CFG_ENV_IS_IN_NVRAM 1 /* Environment uses NVRAM */
+#undef CFG_ENV_IS_IN_FLASH /* ... not in flash */
+#undef CFG_ENV_IS_IN_EEPROM /* ... not in EEPROM */
+#define CONFIG_ENV_OVERWRITE 1 /* allow env overwrite */
+
+#define CFG_ENV_SIZE 0x1000 /* Size of Env vars */
+#define CFG_ENV_ADDR (CFG_NVRAM_BASE_ADDR)
+
+#define CONFIG_BOOTDELAY 5 /* 5 second autoboot */
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial dnld */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+/*-----------------------------------------------------------------------
+ * Networking
+ *----------------------------------------------------------------------*/
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_NET_MULTI 1
+#define CONFIG_PHY_ADDR 0xff /* no phy on EMAC0 */
+#define CONFIG_PHY1_ADDR 0xff /* no phy on EMAC1 */
+#define CONFIG_PHY2_ADDR 0x08 /* PHY addr, MGMT, EMAC2 */
+#define CONFIG_PHY3_ADDR 0x18 /* PHY addr, LCL, EMAC3 */
+#define CONFIG_HAS_ETH0
+#define CONFIG_HAS_ETH1
+#define CONFIG_HAS_ETH2
+#define CONFIG_HAS_ETH3
+#define CONFIG_CIS8201_PHY 1 /* RGMII mode for Cicada */
+#define CONFIG_CIS8201_SHORT_ETCH 1 /* Use short etch mode */
+#define CONFIG_PHY_GIGE 1 /* GbE speed/duplex detect */
+#define CONFIG_PHY_RESET_DELAY 1000
+#define CONFIG_NETMASK 255.255.0.0
+#define CONFIG_ETHADDR 00:00:00:00:00:00 /* No EMAC 0 support */
+#define CONFIG_ETH1ADDR 00:00:00:00:00:00 /* No EMAC 1 support */
+#define CFG_RX_ETH_BUFFER 32 /* #eth rx buff & descrs */
+
+
+/*-----------------------------------------------------------------------
+ * Console/Commands/Parser
+ *----------------------------------------------------------------------*/
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_PCI | \
+ CFG_CMD_IRQ | \
+ CFG_CMD_I2C | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DATE | \
+ CFG_CMD_BEDBUG | \
+ CFG_CMD_PING | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_MII | \
+ CFG_CMD_NET | \
+ CFG_CMD_ELF | \
+ CFG_CMD_IDE | \
+ CFG_CMD_FAT)
+
+/* Include NetConsole support */
+#define CONFIG_NETCONSOLE
+
+/* Include auto complete with tabs */
+#define CONFIG_AUTO_COMPLETE 1
+#define CFG_AUTO_COMPLETE 1
+#define CFG_ALT_MEMTEST 1 /* use real memory test */
+
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "KaRefDes=> " /* Monitor Command Prompt */
+
+#define CFG_HUSH_PARSER 1 /* HUSH for ext'd cli */
+#define CFG_PROMPT_HUSH_PS2 "> "
+
+
+/*-----------------------------------------------------------------------
+ * Console Buffer
+ *----------------------------------------------------------------------*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+ /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of cmd args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Arg Buffer Size */
+
+/*-----------------------------------------------------------------------
+ * Memory Test
+ *----------------------------------------------------------------------*/
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+/*-----------------------------------------------------------------------
+ * Compact Flash (in true IDE mode)
+ *----------------------------------------------------------------------*/
+#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
+#undef CONFIG_IDE_LED /* no led for ide supported */
+
+#define CONFIG_IDE_RESET /* reset for ide supported */
+#define CFG_IDE_MAXBUS 1 /* max. 1 IDE busses */
+#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
+
+#define CFG_ATA_BASE_ADDR 0xF0000000
+#define CFG_ATA_IDE0_OFFSET 0x0000
+#define CFG_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */
+#define CFG_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses*/
+#define CFG_ATA_ALT_OFFSET 0x100000 /* Offset for alternate registers */
+
+#define CFG_ATA_STRIDE 2 /* Directly connected CF, needs a stride
+ to get to the correct offset */
+#define CONFIG_DOS_PARTITION 1 /* Include dos partition */
+
+/*-----------------------------------------------------------------------
+ * PCI
+ *----------------------------------------------------------------------*/
+/* General PCI */
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices */
+#define CFG_PCI_TARGBASE (CFG_PCI_MEMBASE)
+
+/* Board-specific PCI */
+#define CFG_PCI_PRE_INIT /* enable board pci_pre_init*/
+#define CFG_PCI_TARGET_INIT /* let board init pci target*/
+
+#define CFG_PCI_SUBSYS_VENDORID 0x17BA /* Sandburst */
+#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_CACHELINE_SIZE 32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above */
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal PowerOn: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port baud */
+#define CONFIG_KGDB_SER_INDEX 2 /* kgdb serial port */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Miscellaneous configurable options
+ *----------------------------------------------------------------------*/
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+#define CFG_LOAD_ADDR 0x8000000 /* default load address */
+#define CFG_EXTBDINFO 1 /* use extended board_info */
+
+#define CFG_HZ 100 /* decr freq: 1 ms ticks */
+
+
+#endif /* __CONFIG_H */