summaryrefslogtreecommitdiff
path: root/include/commproc.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/commproc.h')
-rw-r--r--include/commproc.h51
1 files changed, 51 insertions, 0 deletions
diff --git a/include/commproc.h b/include/commproc.h
index 5ff82b7..a7d8dbd 100644
--- a/include/commproc.h
+++ b/include/commproc.h
@@ -1128,6 +1128,57 @@ typedef struct scc_enet {
/*** NETVIA *******************************************************/
+/* SinoVee Microsystems SC8xx series FEL8xx-AT,SC823,SC850,SC855T,SC860T */
+#if ( defined CONFIG_SVM_SC8xx )
+# ifndef CONFIG_FEC_ENET
+
+#define PROFF_ENET PROFF_SCC2
+#define CPM_CR_ENET CPM_CR_CH_SCC2
+#define SCC_ENET 1
+
+ /* Bits in parallel I/O port registers that have to be set/cleared
+ * * * * to configure the pins for SCC2 use.
+ * * * */
+#define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */
+#define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */
+#define PA_ENET_RCLK ((ushort)0x0400) /* PA 5 */
+#define PA_ENET_TCLK ((ushort)0x0800) /* PA 4 */
+
+#define PB_ENET_TENA ((uint)0x00002000) /* PB 18 */
+
+#define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */
+#define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */
+/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to
+ * * * * SCC2. Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero.
+ * * * */
+#define SICR_ENET_MASK ((uint)0x0000ff00)
+#define SICR_ENET_CLKRT ((uint)0x00003700)
+
+# else /* Use FEC for Fast Ethernet */
+
+#undef SCC_ENET
+#define FEC_ENET
+
+#define PD_MII_TXD1 ((ushort)0x1000) /* PD 3 */
+#define PD_MII_TXD2 ((ushort)0x0800) /* PD 4 */
+#define PD_MII_TXD3 ((ushort)0x0400) /* PD 5 */
+#define PD_MII_RX_DV ((ushort)0x0200) /* PD 6 */
+#define PD_MII_RX_ERR ((ushort)0x0100) /* PD 7 */
+#define PD_MII_RX_CLK ((ushort)0x0080) /* PD 8 */
+#define PD_MII_TXD0 ((ushort)0x0040) /* PD 9 */
+#define PD_MII_RXD0 ((ushort)0x0020) /* PD 10 */
+#define PD_MII_TX_ERR ((ushort)0x0010) /* PD 11 */
+#define PD_MII_MDC ((ushort)0x0008) /* PD 12 */
+#define PD_MII_RXD1 ((ushort)0x0004) /* PD 13 */
+#define PD_MII_RXD2 ((ushort)0x0002) /* PD 14 */
+#define PD_MII_RXD3 ((ushort)0x0001) /* PD 15 */
+
+#define PD_MII_MASK ((ushort)0x1FFF) /* PD 3...15 */
+
+# endif /* CONFIG_FEC_ENET */
+#endif /* CONFIG_SVM_SC8xx */
+
+
#if defined(CONFIG_NETVIA)
/* Bits in parallel I/O port registers that have to be set/cleared
* to configure the pins for SCC2 use.