summaryrefslogtreecommitdiff
path: root/include/asm-arm
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-arm')
-rw-r--r--include/asm-arm/arch-arm720t/netarm_mem_module.h18
-rw-r--r--include/asm-arm/arch-arm720t/netarm_ser_module.h32
-rw-r--r--include/asm-arm/arch-arm720t/s3c4510b.h10
-rw-r--r--include/asm-arm/arch-at91rm9200/AT91RM9200.h382
-rw-r--r--include/asm-arm/arch-at91sam9/gpio.h4
-rw-r--r--include/asm-arm/arch-ixp/ixp425.h76
-rw-r--r--include/asm-arm/arch-omap24xx/clocks.h12
-rw-r--r--include/asm-arm/arch-pxa/bitfield.h44
-rw-r--r--include/asm-arm/arch-pxa/mmc.h107
-rw-r--r--include/asm-arm/arch-s3c24x0/memory.h8
-rw-r--r--include/asm-arm/arch-sa1100/bitfield.h44
-rw-r--r--include/asm-arm/u-boot.h2
12 files changed, 369 insertions, 370 deletions
diff --git a/include/asm-arm/arch-arm720t/netarm_mem_module.h b/include/asm-arm/arch-arm720t/netarm_mem_module.h
index f0529fd..c650c3b 100644
--- a/include/asm-arm/arch-arm720t/netarm_mem_module.h
+++ b/include/asm-arm/arch-arm720t/netarm_mem_module.h
@@ -170,15 +170,15 @@
/* Option B Registers (0xFFC0_00x8) */
#define NETARM_MEM_OPTB_SYNC_1_STAGE (0x00000001)
#define NETARM_MEM_OPTB_SYNC_2_STAGE (0x00000002)
-#define NETARM_MEM_OPTB_BCYC_PLUS0 (0x00000000)
-#define NETARM_MEM_OPTB_BCYC_PLUS4 (0x00000004)
-#define NETARM_MEM_OPTB_BCYC_PLUS8 (0x00000008)
-#define NETARM_MEM_OPTB_BCYC_PLUS12 (0x0000000C)
-
-#define NETARM_MEM_OPTB_WAIT_PLUS0 (0x00000000)
-#define NETARM_MEM_OPTB_WAIT_PLUS16 (0x00000010)
-#define NETARM_MEM_OPTB_WAIT_PLUS32 (0x00000020)
-#define NETARM_MEM_OPTB_WAIT_PLUS48 (0x00000030)
+#define NETARM_MEM_OPTB_BCYC_PLUS0 (0x00000000)
+#define NETARM_MEM_OPTB_BCYC_PLUS4 (0x00000004)
+#define NETARM_MEM_OPTB_BCYC_PLUS8 (0x00000008)
+#define NETARM_MEM_OPTB_BCYC_PLUS12 (0x0000000C)
+
+#define NETARM_MEM_OPTB_WAIT_PLUS0 (0x00000000)
+#define NETARM_MEM_OPTB_WAIT_PLUS16 (0x00000010)
+#define NETARM_MEM_OPTB_WAIT_PLUS32 (0x00000020)
+#define NETARM_MEM_OPTB_WAIT_PLUS48 (0x00000030)
#endif
#endif
diff --git a/include/asm-arm/arch-arm720t/netarm_ser_module.h b/include/asm-arm/arch-arm720t/netarm_ser_module.h
index fceabd1..6fbae11 100644
--- a/include/asm-arm/arch-arm720t/netarm_ser_module.h
+++ b/include/asm-arm/arch-arm720t/netarm_ser_module.h
@@ -284,21 +284,21 @@ typedef struct {
/* from section 7.5.4 of HW Ref Guide */
/* #ifdef CONFIG_NETARM_PLL_BYPASS */
-#define NETARM_SER_BR_X16(x) ( NETARM_SER_BR_EN | \
- NETARM_SER_BR_RX_CLK_INT | \
- NETARM_SER_BR_TX_CLK_INT | \
- NETARM_SER_BR_CLK_EXT_5 | \
- ( ( ( ( NETARM_XTAL_FREQ / \
- ( x * 10 ) ) - 1 ) / 16 ) & \
+#define NETARM_SER_BR_X16(x) ( NETARM_SER_BR_EN | \
+ NETARM_SER_BR_RX_CLK_INT | \
+ NETARM_SER_BR_TX_CLK_INT | \
+ NETARM_SER_BR_CLK_EXT_5 | \
+ ( ( ( ( NETARM_XTAL_FREQ / \
+ ( x * 10 ) ) - 1 ) / 16 ) & \
NETARM_SER_BR_MASK ) )
/*
#else
-#define NETARM_SER_BR_X16(x) ( NETARM_SER_BR_EN | \
- NETARM_SER_BR_RX_CLK_INT | \
- NETARM_SER_BR_TX_CLK_INT | \
- NETARM_SER_BR_CLK_SYSTEM | \
- ( ( ( ( NETARM_PLLED_SYSCLK_FREQ / \
- ( x * 2 ) ) - 1 ) / 16 ) & \
+#define NETARM_SER_BR_X16(x) ( NETARM_SER_BR_EN | \
+ NETARM_SER_BR_RX_CLK_INT | \
+ NETARM_SER_BR_TX_CLK_INT | \
+ NETARM_SER_BR_CLK_SYSTEM | \
+ ( ( ( ( NETARM_PLLED_SYSCLK_FREQ / \
+ ( x * 2 ) ) - 1 ) / 16 ) & \
NETARM_SER_BR_MASK ) )
#endif
*/
@@ -313,13 +313,13 @@ typedef struct {
/* #ifdef CONFIG_NETARM_PLL_BYPASS */
#define NETARM_SER_RXGAP(x) ( NETARM_SER_RX_GAP_TIMER_EN | \
( ( ( ( 10 * NETARM_XTAL_FREQ ) / \
- ( x * 5 * 512 ) ) - 1 ) & \
+ ( x * 5 * 512 ) ) - 1 ) & \
NETARM_SER_RX_GAP_MASK ) )
/*
#else
#define NETARM_SER_RXGAP(x) ( NETARM_SER_RX_GAP_TIMER_EN | \
( ( ( ( 2 * NETARM_PLLED_SYSCLK_FREQ ) / \
- ( x * 512 ) ) - 1 ) & \
+ ( x * 512 ) ) - 1 ) & \
NETARM_SER_RX_GAP_MASK ) )
#endif
*/
@@ -327,11 +327,11 @@ typedef struct {
#if 0
#define NETARM_SER_RXGAP(x) ( NETARM_SER_RX_GAP_TIMER_EN | \
( ( ( ( 2 * NETARM_PLLED_SYSCLK_FREQ ) / \
- ( x * 5 * 512 ) ) - 1 ) & \
+ ( x * 5 * 512 ) ) - 1 ) & \
NETARM_SER_RX_GAP_MASK ) )
#define NETARM_SER_RXGAP(x) ( NETARM_SER_RX_GAP_TIMER_EN | \
( ( ( ( 10 * NETARM_XTAL_FREQ ) / \
- ( x * 512 ) ) - 1 ) & \
+ ( x * 512 ) ) - 1 ) & \
NETARM_SER_RX_GAP_MASK ) )
#endif
diff --git a/include/asm-arm/arch-arm720t/s3c4510b.h b/include/asm-arm/arch-arm720t/s3c4510b.h
index 73a3b6d..6b8c8ed 100644
--- a/include/asm-arm/arch-arm720t/s3c4510b.h
+++ b/include/asm-arm/arch-arm720t/s3c4510b.h
@@ -35,7 +35,7 @@
/* Special Register Start Address After System Reset */
#define REG_BASE (0x03ff0000)
-#define SPSTR (REG_BASE)
+#define SPSTR (REG_BASE)
/* *********************** */
/* System Manager Register */
@@ -100,7 +100,7 @@
#define REG_I2C_CON (REG_BASE+0xf000)
#define REG_I2C_BUF (REG_BASE+0xf004)
#define REG_I2C_PS (REG_BASE+0xf008)
-#define REG_I2C_COUNT (REG_BASE+0xf00c)
+#define REG_I2C_COUNT (REG_BASE+0xf00c)
/********************/
/* GDMA 0 */
@@ -149,7 +149,7 @@
/********************/
/* Timer Register */
/********************/
-#define REG_TMOD (REG_BASE+0x6000)
+#define REG_TMOD (REG_BASE+0x6000)
#define REG_TDATA0 (REG_BASE+0x6004)
#define REG_TDATA1 (REG_BASE+0x6008)
#define REG_TCNT0 (REG_BASE+0x600c)
@@ -159,8 +159,8 @@
/* I/O Port Interface */
/**********************/
#define REG_IOPMODE (REG_BASE+0x5000)
-#define REG_IOPCON (REG_BASE+0x5004)
-#define REG_IOPDATA (REG_BASE+0x5008)
+#define REG_IOPCON (REG_BASE+0x5004)
+#define REG_IOPDATA (REG_BASE+0x5008)
/*********************************/
/* Interrupt Controller Register */
diff --git a/include/asm-arm/arch-at91rm9200/AT91RM9200.h b/include/asm-arm/arch-at91rm9200/AT91RM9200.h
index 0e01005..2f7f710 100644
--- a/include/asm-arm/arch-at91rm9200/AT91RM9200.h
+++ b/include/asm-arm/arch-at91rm9200/AT91RM9200.h
@@ -32,17 +32,17 @@ typedef volatile unsigned int AT91_REG; /* Hardware register definition */
/*****************************************************************************/
typedef struct _AT91S_TC
{
- AT91_REG TC_CCR; /* Channel Control Register */
- AT91_REG TC_CMR; /* Channel Mode Register */
- AT91_REG Reserved0[2]; /* */
- AT91_REG TC_CV; /* Counter Value */
- AT91_REG TC_RA; /* Register A */
- AT91_REG TC_RB; /* Register B */
- AT91_REG TC_RC; /* Register C */
- AT91_REG TC_SR; /* Status Register */
- AT91_REG TC_IER; /* Interrupt Enable Register */
- AT91_REG TC_IDR; /* Interrupt Disable Register */
- AT91_REG TC_IMR; /* Interrupt Mask Register */
+ AT91_REG TC_CCR; /* Channel Control Register */
+ AT91_REG TC_CMR; /* Channel Mode Register */
+ AT91_REG Reserved0[2]; /* */
+ AT91_REG TC_CV; /* Counter Value */
+ AT91_REG TC_RA; /* Register A */
+ AT91_REG TC_RB; /* Register B */
+ AT91_REG TC_RC; /* Register C */
+ AT91_REG TC_SR; /* Status Register */
+ AT91_REG TC_IER; /* Interrupt Enable Register */
+ AT91_REG TC_IDR; /* Interrupt Disable Register */
+ AT91_REG TC_IMR; /* Interrupt Mask Register */
} AT91S_TC, *AT91PS_TC;
#define AT91C_TC_TIMER_DIV1_CLOCK ((unsigned int) 0x0 << 0) /* (TC) MCK/2 */
@@ -65,33 +65,33 @@ typedef struct _AT91S_TC
/*****************************************************************************/
typedef struct _AT91S_USART
{
- AT91_REG US_CR; /* Control Register */
- AT91_REG US_MR; /* Mode Register */
- AT91_REG US_IER; /* Interrupt Enable Register */
- AT91_REG US_IDR; /* Interrupt Disable Register */
- AT91_REG US_IMR; /* Interrupt Mask Register */
- AT91_REG US_CSR; /* Channel Status Register */
- AT91_REG US_RHR; /* Receiver Holding Register */
- AT91_REG US_THR; /* Transmitter Holding Register */
- AT91_REG US_BRGR; /* Baud Rate Generator Register */
- AT91_REG US_RTOR; /* Receiver Time-out Register */
- AT91_REG US_TTGR; /* Transmitter Time-guard Register */
- AT91_REG Reserved0[5]; /* */
- AT91_REG US_FIDI; /* FI_DI_Ratio Register */
- AT91_REG US_NER; /* Nb Errors Register */
- AT91_REG US_XXR; /* XON_XOFF Register */
- AT91_REG US_IF; /* IRDA_FILTER Register */
+ AT91_REG US_CR; /* Control Register */
+ AT91_REG US_MR; /* Mode Register */
+ AT91_REG US_IER; /* Interrupt Enable Register */
+ AT91_REG US_IDR; /* Interrupt Disable Register */
+ AT91_REG US_IMR; /* Interrupt Mask Register */
+ AT91_REG US_CSR; /* Channel Status Register */
+ AT91_REG US_RHR; /* Receiver Holding Register */
+ AT91_REG US_THR; /* Transmitter Holding Register */
+ AT91_REG US_BRGR; /* Baud Rate Generator Register */
+ AT91_REG US_RTOR; /* Receiver Time-out Register */
+ AT91_REG US_TTGR; /* Transmitter Time-guard Register */
+ AT91_REG Reserved0[5]; /* */
+ AT91_REG US_FIDI; /* FI_DI_Ratio Register */
+ AT91_REG US_NER; /* Nb Errors Register */
+ AT91_REG US_XXR; /* XON_XOFF Register */
+ AT91_REG US_IF; /* IRDA_FILTER Register */
AT91_REG Reserved1[44]; /* */
- AT91_REG US_RPR; /* Receive Pointer Register */
- AT91_REG US_RCR; /* Receive Counter Register */
- AT91_REG US_TPR; /* Transmit Pointer Register */
- AT91_REG US_TCR; /* Transmit Counter Register */
- AT91_REG US_RNPR; /* Receive Next Pointer Register */
- AT91_REG US_RNCR; /* Receive Next Counter Register */
- AT91_REG US_TNPR; /* Transmit Next Pointer Register */
- AT91_REG US_TNCR; /* Transmit Next Counter Register */
- AT91_REG US_PTCR; /* PDC Transfer Control Register */
- AT91_REG US_PTSR; /* PDC Transfer Status Register */
+ AT91_REG US_RPR; /* Receive Pointer Register */
+ AT91_REG US_RCR; /* Receive Counter Register */
+ AT91_REG US_TPR; /* Transmit Pointer Register */
+ AT91_REG US_TCR; /* Transmit Counter Register */
+ AT91_REG US_RNPR; /* Receive Next Pointer Register */
+ AT91_REG US_RNCR; /* Receive Next Counter Register */
+ AT91_REG US_TNPR; /* Transmit Next Pointer Register */
+ AT91_REG US_TNCR; /* Transmit Next Counter Register */
+ AT91_REG US_PTCR; /* PDC Transfer Control Register */
+ AT91_REG US_PTSR; /* PDC Transfer Status Register */
} AT91S_USART, *AT91PS_USART;
/*****************************************************************************/
@@ -99,10 +99,10 @@ typedef struct _AT91S_USART
/*****************************************************************************/
typedef struct _AT91S_CKGR
{
- AT91_REG CKGR_MOR; /* Main Oscillator Register */
- AT91_REG CKGR_MCFR; /* Main Clock Frequency Register */
- AT91_REG CKGR_PLLAR; /* PLL A Register */
- AT91_REG CKGR_PLLBR; /* PLL B Register */
+ AT91_REG CKGR_MOR; /* Main Oscillator Register */
+ AT91_REG CKGR_MCFR; /* Main Clock Frequency Register */
+ AT91_REG CKGR_PLLAR; /* PLL A Register */
+ AT91_REG CKGR_PLLBR; /* PLL B Register */
} AT91S_CKGR, *AT91PS_CKGR;
/* -------- CKGR_MOR : (CKGR Offset: 0x0) Main Oscillator Register -------- */
@@ -146,41 +146,41 @@ typedef struct _AT91S_CKGR
/*****************************************************************************/
typedef struct _AT91S_PIO
{
- AT91_REG PIO_PER; /* PIO Enable Register */
- AT91_REG PIO_PDR; /* PIO Disable Register */
- AT91_REG PIO_PSR; /* PIO Status Register */
- AT91_REG Reserved0[1]; /* */
- AT91_REG PIO_OER; /* Output Enable Register */
- AT91_REG PIO_ODR; /* Output Disable Registerr */
- AT91_REG PIO_OSR; /* Output Status Register */
- AT91_REG Reserved1[1]; /* */
- AT91_REG PIO_IFER; /* Input Filter Enable Register */
- AT91_REG PIO_IFDR; /* Input Filter Disable Register */
- AT91_REG PIO_IFSR; /* Input Filter Status Register */
- AT91_REG Reserved2[1]; /* */
- AT91_REG PIO_SODR; /* Set Output Data Register */
- AT91_REG PIO_CODR; /* Clear Output Data Register */
- AT91_REG PIO_ODSR; /* Output Data Status Register */
- AT91_REG PIO_PDSR; /* Pin Data Status Register */
- AT91_REG PIO_IER; /* Interrupt Enable Register */
- AT91_REG PIO_IDR; /* Interrupt Disable Register */
- AT91_REG PIO_IMR; /* Interrupt Mask Register */
- AT91_REG PIO_ISR; /* Interrupt Status Register */
- AT91_REG PIO_MDER; /* Multi-driver Enable Register */
- AT91_REG PIO_MDDR; /* Multi-driver Disable Register */
- AT91_REG PIO_MDSR; /* Multi-driver Status Register */
- AT91_REG Reserved3[1]; /* */
- AT91_REG PIO_PPUDR; /* Pull-up Disable Register */
- AT91_REG PIO_PPUER; /* Pull-up Enable Register */
- AT91_REG PIO_PPUSR; /* Pad Pull-up Status Register */
- AT91_REG Reserved4[1]; /* */
- AT91_REG PIO_ASR; /* Select A Register */
- AT91_REG PIO_BSR; /* Select B Register */
- AT91_REG PIO_ABSR; /* AB Select Status Register */
- AT91_REG Reserved5[9]; /* */
- AT91_REG PIO_OWER; /* Output Write Enable Register */
- AT91_REG PIO_OWDR; /* Output Write Disable Register */
- AT91_REG PIO_OWSR; /* Output Write Status Register */
+ AT91_REG PIO_PER; /* PIO Enable Register */
+ AT91_REG PIO_PDR; /* PIO Disable Register */
+ AT91_REG PIO_PSR; /* PIO Status Register */
+ AT91_REG Reserved0[1]; /* */
+ AT91_REG PIO_OER; /* Output Enable Register */
+ AT91_REG PIO_ODR; /* Output Disable Registerr */
+ AT91_REG PIO_OSR; /* Output Status Register */
+ AT91_REG Reserved1[1]; /* */
+ AT91_REG PIO_IFER; /* Input Filter Enable Register */
+ AT91_REG PIO_IFDR; /* Input Filter Disable Register */
+ AT91_REG PIO_IFSR; /* Input Filter Status Register */
+ AT91_REG Reserved2[1]; /* */
+ AT91_REG PIO_SODR; /* Set Output Data Register */
+ AT91_REG PIO_CODR; /* Clear Output Data Register */
+ AT91_REG PIO_ODSR; /* Output Data Status Register */
+ AT91_REG PIO_PDSR; /* Pin Data Status Register */
+ AT91_REG PIO_IER; /* Interrupt Enable Register */
+ AT91_REG PIO_IDR; /* Interrupt Disable Register */
+ AT91_REG PIO_IMR; /* Interrupt Mask Register */
+ AT91_REG PIO_ISR; /* Interrupt Status Register */
+ AT91_REG PIO_MDER; /* Multi-driver Enable Register */
+ AT91_REG PIO_MDDR; /* Multi-driver Disable Register */
+ AT91_REG PIO_MDSR; /* Multi-driver Status Register */
+ AT91_REG Reserved3[1]; /* */
+ AT91_REG PIO_PPUDR; /* Pull-up Disable Register */
+ AT91_REG PIO_PPUER; /* Pull-up Enable Register */
+ AT91_REG PIO_PPUSR; /* Pad Pull-up Status Register */
+ AT91_REG Reserved4[1]; /* */
+ AT91_REG PIO_ASR; /* Select A Register */
+ AT91_REG PIO_BSR; /* Select B Register */
+ AT91_REG PIO_ABSR; /* AB Select Status Register */
+ AT91_REG Reserved5[9]; /* */
+ AT91_REG PIO_OWER; /* Output Write Enable Register */
+ AT91_REG PIO_OWDR; /* Output Write Disable Register */
+ AT91_REG PIO_OWSR; /* Output Write Status Register */
} AT91S_PIO, *AT91PS_PIO;
@@ -189,30 +189,30 @@ typedef struct _AT91S_PIO
/*****************************************************************************/
typedef struct _AT91S_DBGU
{
- AT91_REG DBGU_CR; /* Control Register */
- AT91_REG DBGU_MR; /* Mode Register */
- AT91_REG DBGU_IER; /* Interrupt Enable Register */
- AT91_REG DBGU_IDR; /* Interrupt Disable Register */
- AT91_REG DBGU_IMR; /* Interrupt Mask Register */
- AT91_REG DBGU_CSR; /* Channel Status Register */
- AT91_REG DBGU_RHR; /* Receiver Holding Register */
- AT91_REG DBGU_THR; /* Transmitter Holding Register */
- AT91_REG DBGU_BRGR; /* Baud Rate Generator Register */
- AT91_REG Reserved0[7]; /* */
- AT91_REG DBGU_C1R; /* Chip ID1 Register */
- AT91_REG DBGU_C2R; /* Chip ID2 Register */
- AT91_REG DBGU_FNTR; /* Force NTRST Register */
- AT91_REG Reserved1[45]; /* */
- AT91_REG DBGU_RPR; /* Receive Pointer Register */
- AT91_REG DBGU_RCR; /* Receive Counter Register */
- AT91_REG DBGU_TPR; /* Transmit Pointer Register */
- AT91_REG DBGU_TCR; /* Transmit Counter Register */
- AT91_REG DBGU_RNPR; /* Receive Next Pointer Register */
- AT91_REG DBGU_RNCR; /* Receive Next Counter Register */
- AT91_REG DBGU_TNPR; /* Transmit Next Pointer Register */
- AT91_REG DBGU_TNCR; /* Transmit Next Counter Register */
- AT91_REG DBGU_PTCR; /* PDC Transfer Control Register */
- AT91_REG DBGU_PTSR; /* PDC Transfer Status Register */
+ AT91_REG DBGU_CR; /* Control Register */
+ AT91_REG DBGU_MR; /* Mode Register */
+ AT91_REG DBGU_IER; /* Interrupt Enable Register */
+ AT91_REG DBGU_IDR; /* Interrupt Disable Register */
+ AT91_REG DBGU_IMR; /* Interrupt Mask Register */
+ AT91_REG DBGU_CSR; /* Channel Status Register */
+ AT91_REG DBGU_RHR; /* Receiver Holding Register */
+ AT91_REG DBGU_THR; /* Transmitter Holding Register */
+ AT91_REG DBGU_BRGR; /* Baud Rate Generator Register */
+ AT91_REG Reserved0[7]; /* */
+ AT91_REG DBGU_C1R; /* Chip ID1 Register */
+ AT91_REG DBGU_C2R; /* Chip ID2 Register */
+ AT91_REG DBGU_FNTR; /* Force NTRST Register */
+ AT91_REG Reserved1[45]; /* */
+ AT91_REG DBGU_RPR; /* Receive Pointer Register */
+ AT91_REG DBGU_RCR; /* Receive Counter Register */
+ AT91_REG DBGU_TPR; /* Transmit Pointer Register */
+ AT91_REG DBGU_TCR; /* Transmit Counter Register */
+ AT91_REG DBGU_RNPR; /* Receive Next Pointer Register */
+ AT91_REG DBGU_RNCR; /* Receive Next Counter Register */
+ AT91_REG DBGU_TNPR; /* Transmit Next Pointer Register */
+ AT91_REG DBGU_TNCR; /* Transmit Next Counter Register */
+ AT91_REG DBGU_PTCR; /* PDC Transfer Control Register */
+ AT91_REG DBGU_PTSR; /* PDC Transfer Status Register */
} AT91S_DBGU, *AT91PS_DBGU;
/* -------- DBGU_IER : (DBGU Offset: 0x8) Debug Unit Interrupt Enable Register -------- */
@@ -247,7 +247,7 @@ typedef struct _AT91S_DBGU
/*****************************************************************************/
typedef struct _AT91S_SMC2
{
- AT91_REG SMC2_CSR[8]; /* SMC2 Chip Select Register */
+ AT91_REG SMC2_CSR[8]; /* SMC2 Chip Select Register */
} AT91S_SMC2, *AT91PS_SMC2;
/* -------- SMC2_CSR : (SMC2 Offset: 0x0) SMC2 Chip Select Register -------- */
@@ -272,21 +272,21 @@ typedef struct _AT91S_SMC2
/*****************************************************************************/
typedef struct _AT91S_PMC
{
- AT91_REG PMC_SCER; /* System Clock Enable Register */
- AT91_REG PMC_SCDR; /* System Clock Disable Register */
- AT91_REG PMC_SCSR; /* System Clock Status Register */
- AT91_REG Reserved0[1]; /* */
- AT91_REG PMC_PCER; /* Peripheral Clock Enable Register */
- AT91_REG PMC_PCDR; /* Peripheral Clock Disable Register */
- AT91_REG PMC_PCSR; /* Peripheral Clock Status Register */
- AT91_REG Reserved1[5]; /* */
- AT91_REG PMC_MCKR; /* Master Clock Register */
- AT91_REG Reserved2[3]; /* */
- AT91_REG PMC_PCKR[8]; /* Programmable Clock Register */
- AT91_REG PMC_IER; /* Interrupt Enable Register */
- AT91_REG PMC_IDR; /* Interrupt Disable Register */
- AT91_REG PMC_SR; /* Status Register */
- AT91_REG PMC_IMR; /* Interrupt Mask Register */
+ AT91_REG PMC_SCER; /* System Clock Enable Register */
+ AT91_REG PMC_SCDR; /* System Clock Disable Register */
+ AT91_REG PMC_SCSR; /* System Clock Status Register */
+ AT91_REG Reserved0[1]; /* */
+ AT91_REG PMC_PCER; /* Peripheral Clock Enable Register */
+ AT91_REG PMC_PCDR; /* Peripheral Clock Disable Register */
+ AT91_REG PMC_PCSR; /* Peripheral Clock Status Register */
+ AT91_REG Reserved1[5]; /* */
+ AT91_REG PMC_MCKR; /* Master Clock Register */
+ AT91_REG Reserved2[3]; /* */
+ AT91_REG PMC_PCKR[8]; /* Programmable Clock Register */
+ AT91_REG PMC_IER; /* Interrupt Enable Register */
+ AT91_REG PMC_IDR; /* Interrupt Disable Register */
+ AT91_REG PMC_SR; /* Status Register */
+ AT91_REG PMC_IMR; /* Interrupt Mask Register */
} AT91S_PMC, *AT91PS_PMC;
/*------- PMC_SCER : (PMC Offset: 0x0) System Clock Enable Register --------*/
@@ -346,49 +346,49 @@ typedef struct _AT91S_PMC
/*****************************************************************************/
typedef struct _AT91S_EMAC
{
- AT91_REG EMAC_CTL; /* Network Control Register */
- AT91_REG EMAC_CFG; /* Network Configuration Register */
- AT91_REG EMAC_SR; /* Network Status Register */
- AT91_REG EMAC_TAR; /* Transmit Address Register */
- AT91_REG EMAC_TCR; /* Transmit Control Register */
- AT91_REG EMAC_TSR; /* Transmit Status Register */
- AT91_REG EMAC_RBQP; /* Receive Buffer Queue Pointer */
- AT91_REG Reserved0[1]; /* */
- AT91_REG EMAC_RSR; /* Receive Status Register */
- AT91_REG EMAC_ISR; /* Interrupt Status Register */
- AT91_REG EMAC_IER; /* Interrupt Enable Register */
- AT91_REG EMAC_IDR; /* Interrupt Disable Register */
- AT91_REG EMAC_IMR; /* Interrupt Mask Register */
- AT91_REG EMAC_MAN; /* PHY Maintenance Register */
- AT91_REG Reserved1[2]; /* */
- AT91_REG EMAC_FRA; /* Frames Transmitted OK Register */
- AT91_REG EMAC_SCOL; /* Single Collision Frame Register */
- AT91_REG EMAC_MCOL; /* Multiple Collision Frame Register */
- AT91_REG EMAC_OK; /* Frames Received OK Register */
- AT91_REG EMAC_SEQE; /* Frame Check Sequence Error Register */
- AT91_REG EMAC_ALE; /* Alignment Error Register */
- AT91_REG EMAC_DTE; /* Deferred Transmission Frame Register */
- AT91_REG EMAC_LCOL; /* Late Collision Register */
- AT91_REG EMAC_ECOL; /* Excessive Collision Register */
- AT91_REG EMAC_CSE; /* Carrier Sense Error Register */
- AT91_REG EMAC_TUE; /* Transmit Underrun Error Register */
- AT91_REG EMAC_CDE; /* Code Error Register */
- AT91_REG EMAC_ELR; /* Excessive Length Error Register */
- AT91_REG EMAC_RJB; /* Receive Jabber Register */
- AT91_REG EMAC_USF; /* Undersize Frame Register */
- AT91_REG EMAC_SQEE; /* SQE Test Error Register */
- AT91_REG EMAC_DRFC; /* Discarded RX Frame Register */
- AT91_REG Reserved2[3]; /* */
- AT91_REG EMAC_HSH; /* Hash Address High[63:32] */
- AT91_REG EMAC_HSL; /* Hash Address Low[31:0] */
- AT91_REG EMAC_SA1L; /* Specific Address 1 Low, First 4 bytes */
- AT91_REG EMAC_SA1H; /* Specific Address 1 High, Last 2 bytes */
- AT91_REG EMAC_SA2L; /* Specific Address 2 Low, First 4 bytes */
- AT91_REG EMAC_SA2H; /* Specific Address 2 High, Last 2 bytes */
- AT91_REG EMAC_SA3L; /* Specific Address 3 Low, First 4 bytes */
- AT91_REG EMAC_SA3H; /* Specific Address 3 High, Last 2 bytes */
- AT91_REG EMAC_SA4L; /* Specific Address 4 Low, First 4 bytes */
- AT91_REG EMAC_SA4H; /* Specific Address 4 High, Last 2 bytesr */
+ AT91_REG EMAC_CTL; /* Network Control Register */
+ AT91_REG EMAC_CFG; /* Network Configuration Register */
+ AT91_REG EMAC_SR; /* Network Status Register */
+ AT91_REG EMAC_TAR; /* Transmit Address Register */
+ AT91_REG EMAC_TCR; /* Transmit Control Register */
+ AT91_REG EMAC_TSR; /* Transmit Status Register */
+ AT91_REG EMAC_RBQP; /* Receive Buffer Queue Pointer */
+ AT91_REG Reserved0[1]; /* */
+ AT91_REG EMAC_RSR; /* Receive Status Register */
+ AT91_REG EMAC_ISR; /* Interrupt Status Register */
+ AT91_REG EMAC_IER; /* Interrupt Enable Register */
+ AT91_REG EMAC_IDR; /* Interrupt Disable Register */
+ AT91_REG EMAC_IMR; /* Interrupt Mask Register */
+ AT91_REG EMAC_MAN; /* PHY Maintenance Register */
+ AT91_REG Reserved1[2]; /* */
+ AT91_REG EMAC_FRA; /* Frames Transmitted OK Register */
+ AT91_REG EMAC_SCOL; /* Single Collision Frame Register */
+ AT91_REG EMAC_MCOL; /* Multiple Collision Frame Register */
+ AT91_REG EMAC_OK; /* Frames Received OK Register */
+ AT91_REG EMAC_SEQE; /* Frame Check Sequence Error Register */
+ AT91_REG EMAC_ALE; /* Alignment Error Register */
+ AT91_REG EMAC_DTE; /* Deferred Transmission Frame Register */
+ AT91_REG EMAC_LCOL; /* Late Collision Register */
+ AT91_REG EMAC_ECOL; /* Excessive Collision Register */
+ AT91_REG EMAC_CSE; /* Carrier Sense Error Register */
+ AT91_REG EMAC_TUE; /* Transmit Underrun Error Register */
+ AT91_REG EMAC_CDE; /* Code Error Register */
+ AT91_REG EMAC_ELR; /* Excessive Length Error Register */
+ AT91_REG EMAC_RJB; /* Receive Jabber Register */
+ AT91_REG EMAC_USF; /* Undersize Frame Register */
+ AT91_REG EMAC_SQEE; /* SQE Test Error Register */
+ AT91_REG EMAC_DRFC; /* Discarded RX Frame Register */
+ AT91_REG Reserved2[3]; /* */
+ AT91_REG EMAC_HSH; /* Hash Address High[63:32] */
+ AT91_REG EMAC_HSL; /* Hash Address Low[31:0] */
+ AT91_REG EMAC_SA1L; /* Specific Address 1 Low, First 4 bytes */
+ AT91_REG EMAC_SA1H; /* Specific Address 1 High, Last 2 bytes */
+ AT91_REG EMAC_SA2L; /* Specific Address 2 Low, First 4 bytes */
+ AT91_REG EMAC_SA2H; /* Specific Address 2 High, Last 2 bytes */
+ AT91_REG EMAC_SA3L; /* Specific Address 3 Low, First 4 bytes */
+ AT91_REG EMAC_SA3H; /* Specific Address 3 High, Last 2 bytes */
+ AT91_REG EMAC_SA4L; /* Specific Address 4 Low, First 4 bytes */
+ AT91_REG EMAC_SA4H; /* Specific Address 4 High, Last 2 bytesr */
} AT91S_EMAC, *AT91PS_EMAC;
/* -------- EMAC_CTL : (EMAC Offset: 0x0) -------- */
@@ -476,27 +476,27 @@ typedef struct _AT91S_EMAC
/*****************************************************************************/
typedef struct _AT91S_SPI
{
- AT91_REG SPI_CR; /* Control Register */
- AT91_REG SPI_MR; /* Mode Register */
- AT91_REG SPI_RDR; /* Receive Data Register */
- AT91_REG SPI_TDR; /* Transmit Data Register */
- AT91_REG SPI_SR; /* Status Register */
- AT91_REG SPI_IER; /* Interrupt Enable Register */
- AT91_REG SPI_IDR; /* Interrupt Disable Register */
- AT91_REG SPI_IMR; /* Interrupt Mask Register */
- AT91_REG Reserved0[4]; /* */
- AT91_REG SPI_CSR[4]; /* Chip Select Register */
+ AT91_REG SPI_CR; /* Control Register */
+ AT91_REG SPI_MR; /* Mode Register */
+ AT91_REG SPI_RDR; /* Receive Data Register */
+ AT91_REG SPI_TDR; /* Transmit Data Register */
+ AT91_REG SPI_SR; /* Status Register */
+ AT91_REG SPI_IER; /* Interrupt Enable Register */
+ AT91_REG SPI_IDR; /* Interrupt Disable Register */
+ AT91_REG SPI_IMR; /* Interrupt Mask Register */
+ AT91_REG Reserved0[4]; /* */
+ AT91_REG SPI_CSR[4]; /* Chip Select Register */
AT91_REG Reserved1[48]; /* */
- AT91_REG SPI_RPR; /* Receive Pointer Register */
- AT91_REG SPI_RCR; /* Receive Counter Register */
- AT91_REG SPI_TPR; /* Transmit Pointer Register */
- AT91_REG SPI_TCR; /* Transmit Counter Register */
- AT91_REG SPI_RNPR; /* Receive Next Pointer Register */
- AT91_REG SPI_RNCR; /* Receive Next Counter Register */
- AT91_REG SPI_TNPR; /* Transmit Next Pointer Register */
- AT91_REG SPI_TNCR; /* Transmit Next Counter Register */
- AT91_REG SPI_PTCR; /* PDC Transfer Control Register */
- AT91_REG SPI_PTSR; /* PDC Transfer Status Register */
+ AT91_REG SPI_RPR; /* Receive Pointer Register */
+ AT91_REG SPI_RCR; /* Receive Counter Register */
+ AT91_REG SPI_TPR; /* Transmit Pointer Register */
+ AT91_REG SPI_TCR; /* Transmit Counter Register */
+ AT91_REG SPI_RNPR; /* Receive Next Pointer Register */
+ AT91_REG SPI_RNCR; /* Receive Next Counter Register */
+ AT91_REG SPI_TNPR; /* Transmit Next Pointer Register */
+ AT91_REG SPI_TNCR; /* Transmit Next Counter Register */
+ AT91_REG SPI_PTCR; /* PDC Transfer Control Register */
+ AT91_REG SPI_PTSR; /* PDC Transfer Status Register */
} AT91S_SPI, *AT91PS_SPI;
/* -------- SPI_CR : (SPI Offset: 0x0) SPI Control Register -------- */
@@ -560,16 +560,16 @@ typedef struct _AT91S_SPI
/*****************************************************************************/
typedef struct _AT91S_PDC
{
- AT91_REG PDC_RPR; /* Receive Pointer Register */
- AT91_REG PDC_RCR; /* Receive Counter Register */
- AT91_REG PDC_TPR; /* Transmit Pointer Register */
- AT91_REG PDC_TCR; /* Transmit Counter Register */
- AT91_REG PDC_RNPR; /* Receive Next Pointer Register */
- AT91_REG PDC_RNCR; /* Receive Next Counter Register */
- AT91_REG PDC_TNPR; /* Transmit Next Pointer Register */
- AT91_REG PDC_TNCR; /* Transmit Next Counter Register */
- AT91_REG PDC_PTCR; /* PDC Transfer Control Register */
- AT91_REG PDC_PTSR; /* PDC Transfer Status Register */
+ AT91_REG PDC_RPR; /* Receive Pointer Register */
+ AT91_REG PDC_RCR; /* Receive Counter Register */
+ AT91_REG PDC_TPR; /* Transmit Pointer Register */
+ AT91_REG PDC_TCR; /* Transmit Counter Register */
+ AT91_REG PDC_RNPR; /* Receive Next Pointer Register */
+ AT91_REG PDC_RNCR; /* Receive Next Counter Register */
+ AT91_REG PDC_TNPR; /* Transmit Next Pointer Register */
+ AT91_REG PDC_TNCR; /* Transmit Next Counter Register */
+ AT91_REG PDC_PTCR; /* PDC Transfer Control Register */
+ AT91_REG PDC_PTSR; /* PDC Transfer Status Register */
} AT91S_PDC, *AT91PS_PDC;
/* -------- PDC_PTCR : (PDC Offset: 0x20) PDC Transfer Control Register -------- */
@@ -700,7 +700,7 @@ typedef struct _AT91S_PDC
#define AT91C_PIO_PB5 ((unsigned int) 1 << 5) /* Pin Controlled by PB5 */
#define AT91C_PIO_PB6 ((unsigned int) 1 << 6) /* Pin Controlled by PB6 */
#define AT91C_PIO_PB7 ((unsigned int) 1 << 7) /* Pin Controlled by PB7 */
-#define AT91C_PIO_PB22 ((unsigned int) 1 << 22) /* Pin Controlled by PB22 */
+#define AT91C_PIO_PB22 ((unsigned int) 1 << 22) /* Pin Controlled by PB22 */
#define AT91C_PIO_PB25 ((unsigned int) 1 << 25) /* Pin Controlled by PB25 */
#define AT91C_PB25_DSR1 ((unsigned int) AT91C_PIO_PB25) /* USART 1 Data Set ready */
#define AT91C_PB25_EF100 ((unsigned int) AT91C_PIO_PB25) /* Ethernet MAC Force 100 Mbits */
@@ -775,7 +775,7 @@ typedef struct _AT91S_PDC
#define AT91C_TCB0_BCR ((AT91_REG *) 0xFFFA00C0) /* (TCB0) TC Block Control Register */
#define AT91C_PIOC_PDR ((AT91_REG *) 0xFFFFF804) /* (PIOC) PIO Disable Register */
#define AT91C_PIOC_PER ((AT91_REG *) 0xFFFFF800) /* (PIOC) PIO Enable Register */
-#define AT91C_PIOC_ODR ((AT91_REG *) 0xFFFFF814) /* (PIOC) Output Disable Registerr */
+#define AT91C_PIOC_ODR ((AT91_REG *) 0xFFFFF814) /* (PIOC) Output Disable Registerr */
#define AT91C_PIOB_PER ((AT91_REG *) 0xFFFFF600) /* (PIOB) PIO Enable Register */
#define AT91C_PIOB_ODR ((AT91_REG *) 0xFFFFF614) /* (PIOB) Output Disable Registerr */
#define AT91C_PIOB_PDSR ((AT91_REG *) 0xFFFFF63C) /* (PIOB) Pin Data Status Register */
diff --git a/include/asm-arm/arch-at91sam9/gpio.h b/include/asm-arm/arch-at91sam9/gpio.h
index c157e10..c4d7b97 100644
--- a/include/asm-arm/arch-at91sam9/gpio.h
+++ b/include/asm-arm/arch-at91sam9/gpio.h
@@ -218,7 +218,7 @@ static inline unsigned pin_to_mask(unsigned pin)
*/
static inline int at91_set_GPIO_periph(unsigned pin, int use_pullup)
{
- void *pio = pin_to_controller(pin);
+ void *pio = pin_to_controller(pin);
unsigned mask = pin_to_mask(pin);
__raw_writel(mask, pio + PIO_IDR);
@@ -232,7 +232,7 @@ static inline int at91_set_GPIO_periph(unsigned pin, int use_pullup)
*/
static inline int at91_set_A_periph(unsigned pin, int use_pullup)
{
- void *pio = pin_to_controller(pin);
+ void *pio = pin_to_controller(pin);
unsigned mask = pin_to_mask(pin);
__raw_writel(mask, pio + PIO_IDR);
diff --git a/include/asm-arm/arch-ixp/ixp425.h b/include/asm-arm/arch-ixp/ixp425.h
index 11dc356..2114437 100644
--- a/include/asm-arm/arch-ixp/ixp425.h
+++ b/include/asm-arm/arch-ixp/ixp425.h
@@ -53,13 +53,13 @@
*
* 0x6000000 0x00004000 0x4000 0xFFFEB000 QMgr
*
- * 0xC0000000 0x100 0x1000 0xFFFDD000 PCI CFG
+ * 0xC0000000 0x100 0x1000 0xFFFDD000 PCI CFG
*
* 0xC4000000 0x100 0x1000 0xFFFDE000 EXP CFG
*
* 0xC8000000 0xC000 0xC000 0xFFFDF000 PERIPHERAL
*
- * 0xCC000000 0x100 0x1000 Not Mapped SDRAM CFG
+ * 0xCC000000 0x100 0x1000 Not Mapped SDRAM CFG
*/
/*
@@ -171,17 +171,17 @@
#define IXP425_SDR_REFRESH_OFFSET 0x04
#define IXP425_SDR_IR_OFFSET 0x08
-#define IXP425_SDRAM_REG(x) (IXP425_SDRAM_CFG_BASE_PHYS+(x))
+#define IXP425_SDRAM_REG(x) (IXP425_SDRAM_CFG_BASE_PHYS+(x))
#define IXP425_SDR_CONFIG IXP425_SDRAM_REG(IXP425_SDR_CONFIG_OFFSET)
-#define IXP425_SDR_REFRESH IXP425_SDRAM_REG(IXP425_SDR_REFRESH_OFFSET)
-#define IXP425_SDR_IR IXP425_SDRAM_REG(IXP425_SDR_IR_OFFSET)
+#define IXP425_SDR_REFRESH IXP425_SDRAM_REG(IXP425_SDR_REFRESH_OFFSET)
+#define IXP425_SDR_IR IXP425_SDRAM_REG(IXP425_SDR_IR_OFFSET)
/*
* UART registers
*/
-#define IXP425_UART1 0
-#define IXP425_UART2 0x1000
+#define IXP425_UART1 0
+#define IXP425_UART2 0x1000
#define IXP425_UART_RBR_OFFSET 0x00
#define IXP425_UART_THR_OFFSET 0x00
@@ -476,49 +476,49 @@
*/
/* CSR bit definitions */
-#define PCI_CSR_HOST BIT(0)
-#define PCI_CSR_ARBEN BIT(1)
-#define PCI_CSR_ADS BIT(2)
-#define PCI_CSR_PDS BIT(3)
-#define PCI_CSR_ABE BIT(4)
-#define PCI_CSR_DBT BIT(5)
-#define PCI_CSR_ASE BIT(8)
-#define PCI_CSR_IC BIT(15)
+#define PCI_CSR_HOST BIT(0)
+#define PCI_CSR_ARBEN BIT(1)
+#define PCI_CSR_ADS BIT(2)
+#define PCI_CSR_PDS BIT(3)
+#define PCI_CSR_ABE BIT(4)
+#define PCI_CSR_DBT BIT(5)
+#define PCI_CSR_ASE BIT(8)
+#define PCI_CSR_IC BIT(15)
/* ISR (Interrupt status) Register bit definitions */
-#define PCI_ISR_PSE BIT(0)
-#define PCI_ISR_PFE BIT(1)
-#define PCI_ISR_PPE BIT(2)
-#define PCI_ISR_AHBE BIT(3)
-#define PCI_ISR_APDC BIT(4)
-#define PCI_ISR_PADC BIT(5)
-#define PCI_ISR_ADB BIT(6)
-#define PCI_ISR_PDB BIT(7)
+#define PCI_ISR_PSE BIT(0)
+#define PCI_ISR_PFE BIT(1)
+#define PCI_ISR_PPE BIT(2)
+#define PCI_ISR_AHBE BIT(3)
+#define PCI_ISR_APDC BIT(4)
+#define PCI_ISR_PADC BIT(5)
+#define PCI_ISR_ADB BIT(6)
+#define PCI_ISR_PDB BIT(7)
/* INTEN (Interrupt Enable) Register bit definitions */
-#define PCI_INTEN_PSE BIT(0)
-#define PCI_INTEN_PFE BIT(1)
-#define PCI_INTEN_PPE BIT(2)
-#define PCI_INTEN_AHBE BIT(3)
-#define PCI_INTEN_APDC BIT(4)
-#define PCI_INTEN_PADC BIT(5)
-#define PCI_INTEN_ADB BIT(6)
-#define PCI_INTEN_PDB BIT(7)
+#define PCI_INTEN_PSE BIT(0)
+#define PCI_INTEN_PFE BIT(1)
+#define PCI_INTEN_PPE BIT(2)
+#define PCI_INTEN_AHBE BIT(3)
+#define PCI_INTEN_APDC BIT(4)
+#define PCI_INTEN_PADC BIT(5)
+#define PCI_INTEN_ADB BIT(6)
+#define PCI_INTEN_PDB BIT(7)
/*
* Shift value for byte enable on NP cmd/byte enable register
*/
-#define IXP425_PCI_NP_CBE_BESL 4
+#define IXP425_PCI_NP_CBE_BESL 4
/*
* PCI commands supported by NP access unit
*/
-#define NP_CMD_IOREAD 0x2
-#define NP_CMD_IOWRITE 0x3
-#define NP_CMD_CONFIGREAD 0xa
-#define NP_CMD_CONFIGWRITE 0xb
-#define NP_CMD_MEMREAD 0x6
-#define NP_CMD_MEMWRITE 0x7
+#define NP_CMD_IOREAD 0x2
+#define NP_CMD_IOWRITE 0x3
+#define NP_CMD_CONFIGREAD 0xa
+#define NP_CMD_CONFIGWRITE 0xb
+#define NP_CMD_MEMREAD 0x6
+#define NP_CMD_MEMWRITE 0x7
#if 0
#ifndef __ASSEMBLY__
diff --git a/include/asm-arm/arch-omap24xx/clocks.h b/include/asm-arm/arch-omap24xx/clocks.h
index 2a95af1..2e92569 100644
--- a/include/asm-arm/arch-omap24xx/clocks.h
+++ b/include/asm-arm/arch-omap24xx/clocks.h
@@ -35,9 +35,9 @@
; PRCM Scheme II
;
; Enable clocks and DPLL for:
-; DPLL=300, DPLLout=600 M=1,N=50 CM_CLKSEL1_PLL[21:8] 12/2*50
-; Core=600 (core domain) DPLLx2 CM_CLKSEL2_PLL[1:0]
-; MPUF=300 (mpu domain) 2 CM_CLKSEL_MPU[4:0]
+; DPLL=300, DPLLout=600 M=1,N=50 CM_CLKSEL1_PLL[21:8] 12/2*50
+; Core=600 (core domain) DPLLx2 CM_CLKSEL2_PLL[1:0]
+; MPUF=300 (mpu domain) 2 CM_CLKSEL_MPU[4:0]
; DSPF=200 (dsp domain) 3 CM_CLKSEL_DSP[4:0]
; DSPI=100 6 CM_CLKSEL_DSP[6:5]
; DSP_S bypass CM_CLKSEL_DSP[7]
@@ -64,9 +64,9 @@
; PRCM Scheme III
;
; Enable clocks and DPLL for:
-; DPLL=266, DPLLout=532 M=5+1,N=133 CM_CLKSEL1_PLL[21:8] 12/6*133=266
-; Core=532 (core domain) DPLLx2 CM_CLKSEL2_PLL[1:0]
-; MPUF=266 (mpu domain) /2 CM_CLKSEL_MPU[4:0]
+; DPLL=266, DPLLout=532 M=5+1,N=133 CM_CLKSEL1_PLL[21:8] 12/6*133=266
+; Core=532 (core domain) DPLLx2 CM_CLKSEL2_PLL[1:0]
+; MPUF=266 (mpu domain) /2 CM_CLKSEL_MPU[4:0]
; DSPF=177.3 (dsp domain) /3 CM_CLKSEL_DSP[4:0]
; DSPI=88.67 /6 CM_CLKSEL_DSP[6:5]
; DSP_S ACTIVATED CM_CLKSEL_DSP[7]
diff --git a/include/asm-arm/arch-pxa/bitfield.h b/include/asm-arm/arch-pxa/bitfield.h
index 2ac5ea2..104a21c 100644
--- a/include/asm-arm/arch-pxa/bitfield.h
+++ b/include/asm-arm/arch-pxa/bitfield.h
@@ -1,13 +1,13 @@
/*
- * FILE bitfield.h
+ * FILE bitfield.h
*
- * Version 1.1
- * Author Copyright (c) Marc A. Viredaz, 1998
- * DEC Western Research Laboratory, Palo Alto, CA
- * Date April 1998 (April 1997)
- * System Advanced RISC Machine (ARM)
+ * Version 1.1
+ * Author Copyright (c) Marc A. Viredaz, 1998
+ * DEC Western Research Laboratory, Palo Alto, CA
+ * Date April 1998 (April 1997)
+ * System Advanced RISC Machine (ARM)
* Language C or ARM Assembly
- * Purpose Definition of macros to operate on bit fields.
+ * Purpose Definition of macros to operate on bit fields.
*/
@@ -35,11 +35,11 @@
* line-size limit).
*
* Input
- * Size Size of the bit field, in number of bits.
- * Shft Shift value of the bit field with respect to bit 0.
+ * Size Size of the bit field, in number of bits.
+ * Shft Shift value of the bit field with respect to bit 0.
*
* Output
- * Fld Encoded bit field.
+ * Fld Encoded bit field.
*/
#define Fld(Size, Shft) (((Size) << 16) + (Shft))
@@ -54,14 +54,14 @@
* bit field.
*
* Input
- * Field Encoded bit field (using the macro "Fld").
+ * Field Encoded bit field (using the macro "Fld").
*
* Output
- * FSize Size of the bit field, in number of bits.
- * FShft Shift value of the bit field with respect to bit 0.
- * FMsk Mask for the bit field.
- * FAlnMsk Mask for the bit field, aligned on bit 0.
- * F1stBit First bit of the bit field.
+ * FSize Size of the bit field, in number of bits.
+ * FShft Shift value of the bit field with respect to bit 0.
+ * FMsk Mask for the bit field.
+ * FAlnMsk Mask for the bit field, aligned on bit 0.
+ * F1stBit First bit of the bit field.
*/
#define FSize(Field) ((Field) >> 16)
@@ -79,11 +79,11 @@
* former appropriately.
*
* Input
- * Value Bit-field value.
- * Field Encoded bit field (using the macro "Fld").
+ * Value Bit-field value.
+ * Field Encoded bit field (using the macro "Fld").
*
* Output
- * FInsrt Bit-field value positioned appropriately.
+ * FInsrt Bit-field value positioned appropriately.
*/
#define FInsrt(Value, Field) \
@@ -98,11 +98,11 @@
* shifting it appropriately.
*
* Input
- * Data Data containing the bit-field to be extracted.
- * Field Encoded bit field (using the macro "Fld").
+ * Data Data containing the bit-field to be extracted.
+ * Field Encoded bit field (using the macro "Fld").
*
* Output
- * FExtr Bit-field value.
+ * FExtr Bit-field value.
*/
#define FExtr(Data, Field) \
diff --git a/include/asm-arm/arch-pxa/mmc.h b/include/asm-arm/arch-pxa/mmc.h
index b9304b1..9440d80 100644
--- a/include/asm-arm/arch-pxa/mmc.h
+++ b/include/asm-arm/arch-pxa/mmc.h
@@ -16,95 +16,95 @@
/* PXA-250 MMC controller registers */
/* MMC_STRPCL */
-#define MMC_STRPCL_STOP_CLK (0x0001UL)
+#define MMC_STRPCL_STOP_CLK (0x0001UL)
#define MMC_STRPCL_START_CLK (0x0002UL)
/* MMC_STAT */
#define MMC_STAT_END_CMD_RES (0x0001UL << 13)
-#define MMC_STAT_PRG_DONE (0x0001UL << 12)
-#define MMC_STAT_DATA_TRAN_DONE (0x0001UL << 11)
-#define MMC_STAT_CLK_EN (0x0001UL << 8)
-#define MMC_STAT_RECV_FIFO_FULL (0x0001UL << 7)
-#define MMC_STAT_XMIT_FIFO_EMPTY (0x0001UL << 6)
-#define MMC_STAT_RES_CRC_ERROR (0x0001UL << 5)
+#define MMC_STAT_PRG_DONE (0x0001UL << 12)
+#define MMC_STAT_DATA_TRAN_DONE (0x0001UL << 11)
+#define MMC_STAT_CLK_EN (0x0001UL << 8)
+#define MMC_STAT_RECV_FIFO_FULL (0x0001UL << 7)
+#define MMC_STAT_XMIT_FIFO_EMPTY (0x0001UL << 6)
+#define MMC_STAT_RES_CRC_ERROR (0x0001UL << 5)
#define MMC_STAT_SPI_READ_ERROR_TOKEN (0x0001UL << 4)
-#define MMC_STAT_CRC_READ_ERROR (0x0001UL << 3)
-#define MMC_STAT_CRC_WRITE_ERROR (0x0001UL << 2)
-#define MMC_STAT_TIME_OUT_RESPONSE (0x0001UL << 1)
-#define MMC_STAT_READ_TIME_OUT (0x0001UL)
+#define MMC_STAT_CRC_READ_ERROR (0x0001UL << 3)
+#define MMC_STAT_CRC_WRITE_ERROR (0x0001UL << 2)
+#define MMC_STAT_TIME_OUT_RESPONSE (0x0001UL << 1)
+#define MMC_STAT_READ_TIME_OUT (0x0001UL)
#define MMC_STAT_ERRORS (MMC_STAT_RES_CRC_ERROR|MMC_STAT_SPI_READ_ERROR_TOKEN\
|MMC_STAT_CRC_READ_ERROR|MMC_STAT_TIME_OUT_RESPONSE\
|MMC_STAT_READ_TIME_OUT|MMC_STAT_CRC_WRITE_ERROR)
/* MMC_CLKRT */
-#define MMC_CLKRT_20MHZ (0x0000UL)
-#define MMC_CLKRT_10MHZ (0x0001UL)
-#define MMC_CLKRT_5MHZ (0x0002UL)
+#define MMC_CLKRT_20MHZ (0x0000UL)
+#define MMC_CLKRT_10MHZ (0x0001UL)
+#define MMC_CLKRT_5MHZ (0x0002UL)
#define MMC_CLKRT_2_5MHZ (0x0003UL)
-#define MMC_CLKRT_1_25MHZ (0x0004UL)
-#define MMC_CLKRT_0_625MHZ (0x0005UL)
-#define MMC_CLKRT_0_3125MHZ (0x0006UL)
+#define MMC_CLKRT_1_25MHZ (0x0004UL)
+#define MMC_CLKRT_0_625MHZ (0x0005UL)
+#define MMC_CLKRT_0_3125MHZ (0x0006UL)
/* MMC_SPI */
-#define MMC_SPI_DISABLE (0x00UL)
-#define MMC_SPI_EN (0x01UL)
-#define MMC_SPI_CS_EN (0x01UL << 2)
-#define MMC_SPI_CS_ADDRESS (0x01UL << 3)
-#define MMC_SPI_CRC_ON (0x01UL << 1)
+#define MMC_SPI_DISABLE (0x00UL)
+#define MMC_SPI_EN (0x01UL)
+#define MMC_SPI_CS_EN (0x01UL << 2)
+#define MMC_SPI_CS_ADDRESS (0x01UL << 3)
+#define MMC_SPI_CRC_ON (0x01UL << 1)
/* MMC_CMDAT */
#define MMC_CMDAT_SD_4DAT (0x0001UL << 8)
#define MMC_CMDAT_MMC_DMA_EN (0x0001UL << 7)
-#define MMC_CMDAT_INIT (0x0001UL << 6)
-#define MMC_CMDAT_BUSY (0x0001UL << 5)
-#define MMC_CMDAT_BCR (0x0003UL << 5)
+#define MMC_CMDAT_INIT (0x0001UL << 6)
+#define MMC_CMDAT_BUSY (0x0001UL << 5)
+#define MMC_CMDAT_BCR (0x0003UL << 5)
#define MMC_CMDAT_STREAM (0x0001UL << 4)
-#define MMC_CMDAT_BLOCK (0x0000UL << 4)
-#define MMC_CMDAT_WRITE (0x0001UL << 3)
-#define MMC_CMDAT_READ (0x0000UL << 3)
-#define MMC_CMDAT_DATA_EN (0x0001UL << 2)
-#define MMC_CMDAT_R0 (0)
-#define MMC_CMDAT_R1 (0x0001UL)
-#define MMC_CMDAT_R2 (0x0002UL)
-#define MMC_CMDAT_R3 (0x0003UL)
+#define MMC_CMDAT_BLOCK (0x0000UL << 4)
+#define MMC_CMDAT_WRITE (0x0001UL << 3)
+#define MMC_CMDAT_READ (0x0000UL << 3)
+#define MMC_CMDAT_DATA_EN (0x0001UL << 2)
+#define MMC_CMDAT_R0 (0)
+#define MMC_CMDAT_R1 (0x0001UL)
+#define MMC_CMDAT_R2 (0x0002UL)
+#define MMC_CMDAT_R3 (0x0003UL)
/* MMC_RESTO */
-#define MMC_RES_TO_MAX (0x007fUL) /* [6:0] */
+#define MMC_RES_TO_MAX (0x007fUL) /* [6:0] */
/* MMC_RDTO */
-#define MMC_READ_TO_MAX (0x0ffffUL) /* [15:0] */
+#define MMC_READ_TO_MAX (0x0ffffUL) /* [15:0] */
/* MMC_BLKLEN */
-#define MMC_BLK_LEN_MAX (0x03ffUL) /* [9:0] */
+#define MMC_BLK_LEN_MAX (0x03ffUL) /* [9:0] */
/* MMC_PRTBUF */
-#define MMC_PRTBUF_BUF_PART_FULL (0x01UL)
+#define MMC_PRTBUF_BUF_PART_FULL (0x01UL)
#define MMC_PRTBUF_BUF_FULL (0x00UL )
/* MMC_I_MASK */
#define MMC_I_MASK_TXFIFO_WR_REQ (0x01UL << 6)
#define MMC_I_MASK_RXFIFO_RD_REQ (0x01UL << 5)
-#define MMC_I_MASK_CLK_IS_OFF (0x01UL << 4)
-#define MMC_I_MASK_STOP_CMD (0x01UL << 3)
-#define MMC_I_MASK_END_CMD_RES (0x01UL << 2)
-#define MMC_I_MASK_PRG_DONE (0x01UL << 1)
+#define MMC_I_MASK_CLK_IS_OFF (0x01UL << 4)
+#define MMC_I_MASK_STOP_CMD (0x01UL << 3)
+#define MMC_I_MASK_END_CMD_RES (0x01UL << 2)
+#define MMC_I_MASK_PRG_DONE (0x01UL << 1)
#define MMC_I_MASK_DATA_TRAN_DONE (0x01UL)
-#define MMC_I_MASK_ALL (0x07fUL)
+#define MMC_I_MASK_ALL (0x07fUL)
/* MMC_I_REG */
-#define MMC_I_REG_TXFIFO_WR_REQ (0x01UL << 6)
-#define MMC_I_REG_RXFIFO_RD_REQ (0x01UL << 5)
+#define MMC_I_REG_TXFIFO_WR_REQ (0x01UL << 6)
+#define MMC_I_REG_RXFIFO_RD_REQ (0x01UL << 5)
#define MMC_I_REG_CLK_IS_OFF (0x01UL << 4)
-#define MMC_I_REG_STOP_CMD (0x01UL << 3)
-#define MMC_I_REG_END_CMD_RES (0x01UL << 2)
-#define MMC_I_REG_PRG_DONE (0x01UL << 1)
-#define MMC_I_REG_DATA_TRAN_DONE (0x01UL)
-#define MMC_I_REG_ALL (0x007fUL)
+#define MMC_I_REG_STOP_CMD (0x01UL << 3)
+#define MMC_I_REG_END_CMD_RES (0x01UL << 2)
+#define MMC_I_REG_PRG_DONE (0x01UL << 1)
+#define MMC_I_REG_DATA_TRAN_DONE (0x01UL)
+#define MMC_I_REG_ALL (0x007fUL)
/* MMC_CMD */
-#define MMC_CMD_INDEX_MAX (0x006fUL) /* [5:0] */
+#define MMC_CMD_INDEX_MAX (0x006fUL) /* [5:0] */
#define CMD(x) (x)
#define MMC_DEFAULT_RCA 1
@@ -112,11 +112,11 @@
#define MMC_BLOCK_SIZE 512
#define MMC_CMD_RESET 0
#define MMC_CMD_SEND_OP_COND 1
-#define MMC_CMD_ALL_SEND_CID 2
+#define MMC_CMD_ALL_SEND_CID 2
#define MMC_CMD_SET_RCA 3
#define MMC_CMD_SELECT_CARD 7
-#define MMC_CMD_SEND_CSD 9
-#define MMC_CMD_SEND_CID 10
+#define MMC_CMD_SEND_CSD 9
+#define MMC_CMD_SEND_CID 10
#define MMC_CMD_SEND_STATUS 13
#define MMC_CMD_SET_BLOCKLEN 16
#define MMC_CMD_READ_BLOCK 17
@@ -203,5 +203,4 @@ typedef struct mmc_csd
ecc:2;
} mmc_csd_t;
-
#endif /* __MMC_PXA_P_H__ */
diff --git a/include/asm-arm/arch-s3c24x0/memory.h b/include/asm-arm/arch-s3c24x0/memory.h
index 333f218..5e254d2 100644
--- a/include/asm-arm/arch-s3c24x0/memory.h
+++ b/include/asm-arm/arch-s3c24x0/memory.h
@@ -103,10 +103,10 @@ extern unsigned long __phys_to_virt(unsigned long ppage);
* The nodes are matched with the physical memory bank addresses which are
* incidentally the same as virtual addresses.
*
- * node 0: 0xc0000000 - 0xc7ffffff
- * node 1: 0xc8000000 - 0xcfffffff
- * node 2: 0xd0000000 - 0xd7ffffff
- * node 3: 0xd8000000 - 0xdfffffff
+ * node 0: 0xc0000000 - 0xc7ffffff
+ * node 1: 0xc8000000 - 0xcfffffff
+ * node 2: 0xd0000000 - 0xd7ffffff
+ * node 3: 0xd8000000 - 0xdfffffff
*/
#define NR_NODES 4
diff --git a/include/asm-arm/arch-sa1100/bitfield.h b/include/asm-arm/arch-sa1100/bitfield.h
index 2ac5ea2..104a21c 100644
--- a/include/asm-arm/arch-sa1100/bitfield.h
+++ b/include/asm-arm/arch-sa1100/bitfield.h
@@ -1,13 +1,13 @@
/*
- * FILE bitfield.h
+ * FILE bitfield.h
*
- * Version 1.1
- * Author Copyright (c) Marc A. Viredaz, 1998
- * DEC Western Research Laboratory, Palo Alto, CA
- * Date April 1998 (April 1997)
- * System Advanced RISC Machine (ARM)
+ * Version 1.1
+ * Author Copyright (c) Marc A. Viredaz, 1998
+ * DEC Western Research Laboratory, Palo Alto, CA
+ * Date April 1998 (April 1997)
+ * System Advanced RISC Machine (ARM)
* Language C or ARM Assembly
- * Purpose Definition of macros to operate on bit fields.
+ * Purpose Definition of macros to operate on bit fields.
*/
@@ -35,11 +35,11 @@
* line-size limit).
*
* Input
- * Size Size of the bit field, in number of bits.
- * Shft Shift value of the bit field with respect to bit 0.
+ * Size Size of the bit field, in number of bits.
+ * Shft Shift value of the bit field with respect to bit 0.
*
* Output
- * Fld Encoded bit field.
+ * Fld Encoded bit field.
*/
#define Fld(Size, Shft) (((Size) << 16) + (Shft))
@@ -54,14 +54,14 @@
* bit field.
*
* Input
- * Field Encoded bit field (using the macro "Fld").
+ * Field Encoded bit field (using the macro "Fld").
*
* Output
- * FSize Size of the bit field, in number of bits.
- * FShft Shift value of the bit field with respect to bit 0.
- * FMsk Mask for the bit field.
- * FAlnMsk Mask for the bit field, aligned on bit 0.
- * F1stBit First bit of the bit field.
+ * FSize Size of the bit field, in number of bits.
+ * FShft Shift value of the bit field with respect to bit 0.
+ * FMsk Mask for the bit field.
+ * FAlnMsk Mask for the bit field, aligned on bit 0.
+ * F1stBit First bit of the bit field.
*/
#define FSize(Field) ((Field) >> 16)
@@ -79,11 +79,11 @@
* former appropriately.
*
* Input
- * Value Bit-field value.
- * Field Encoded bit field (using the macro "Fld").
+ * Value Bit-field value.
+ * Field Encoded bit field (using the macro "Fld").
*
* Output
- * FInsrt Bit-field value positioned appropriately.
+ * FInsrt Bit-field value positioned appropriately.
*/
#define FInsrt(Value, Field) \
@@ -98,11 +98,11 @@
* shifting it appropriately.
*
* Input
- * Data Data containing the bit-field to be extracted.
- * Field Encoded bit field (using the macro "Fld").
+ * Data Data containing the bit-field to be extracted.
+ * Field Encoded bit field (using the macro "Fld").
*
* Output
- * FExtr Bit-field value.
+ * FExtr Bit-field value.
*/
#define FExtr(Data, Field) \
diff --git a/include/asm-arm/u-boot.h b/include/asm-arm/u-boot.h
index c120312..b11d555 100644
--- a/include/asm-arm/u-boot.h
+++ b/include/asm-arm/u-boot.h
@@ -47,7 +47,7 @@ typedef struct bd_info {
{
ulong start;
ulong size;
- } bi_dram[CONFIG_NR_DRAM_BANKS];
+ } bi_dram[CONFIG_NR_DRAM_BANKS];
#ifdef CONFIG_HAS_ETH1
/* second onboard ethernet port */
unsigned char bi_enet1addr[6];