diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/dma/apbh_dma.c | 4 | ||||
| -rw-r--r-- | drivers/i2c/mxs_i2c.c | 2 | ||||
| -rw-r--r-- | drivers/mmc/mxsmmc.c | 2 | ||||
| -rw-r--r-- | drivers/mtd/nand/mxs_nand.c | 6 | ||||
| -rw-r--r-- | drivers/rtc/mxsrtc.c | 4 | ||||
| -rw-r--r-- | drivers/spi/mxs_spi.c | 8 |
6 files changed, 13 insertions, 13 deletions
diff --git a/drivers/dma/apbh_dma.c b/drivers/dma/apbh_dma.c index 38eff4f..ca5a32f 100644 --- a/drivers/dma/apbh_dma.c +++ b/drivers/dma/apbh_dma.c @@ -512,7 +512,7 @@ static int mxs_dma_wait_complete(uint32_t timeout, unsigned int chan) if (ret) return ret; - if (mx28_wait_mask_set(&apbh_regs->hw_apbh_ctrl1_reg, + if (mxs_wait_mask_set(&apbh_regs->hw_apbh_ctrl1_reg, 1 << chan, timeout)) { ret = -ETIMEDOUT; mxs_dma_reset(chan); @@ -557,7 +557,7 @@ void mxs_dma_init(void) struct mxs_apbh_regs *apbh_regs = (struct mxs_apbh_regs *)MXS_APBH_BASE; - mx28_reset_block(&apbh_regs->hw_apbh_ctrl0_reg); + mxs_reset_block(&apbh_regs->hw_apbh_ctrl0_reg); #ifdef CONFIG_APBH_DMA_BURST8 writel(APBH_CTRL0_AHB_BURST8_EN, diff --git a/drivers/i2c/mxs_i2c.c b/drivers/i2c/mxs_i2c.c index 5d61d7a..2a193c2 100644 --- a/drivers/i2c/mxs_i2c.c +++ b/drivers/i2c/mxs_i2c.c @@ -41,7 +41,7 @@ void mxs_i2c_reset(void) struct mxs_i2c_regs *i2c_regs = (struct mxs_i2c_regs *)MXS_I2C0_BASE; int ret; - ret = mx28_reset_block(&i2c_regs->hw_i2c_ctrl0_reg); + ret = mxs_reset_block(&i2c_regs->hw_i2c_ctrl0_reg); if (ret) { debug("MXS I2C: Block reset timeout\n"); return; diff --git a/drivers/mmc/mxsmmc.c b/drivers/mmc/mxsmmc.c index 018939f..9a98c6b 100644 --- a/drivers/mmc/mxsmmc.c +++ b/drivers/mmc/mxsmmc.c @@ -336,7 +336,7 @@ static int mxsmmc_init(struct mmc *mmc) struct mxs_ssp_regs *ssp_regs = priv->regs; /* Reset SSP */ - mx28_reset_block(&ssp_regs->hw_ssp_ctrl0_reg); + mxs_reset_block(&ssp_regs->hw_ssp_ctrl0_reg); /* 8 bits word length in MMC mode */ clrsetbits_le32(&ssp_regs->hw_ssp_ctrl1, diff --git a/drivers/mtd/nand/mxs_nand.c b/drivers/mtd/nand/mxs_nand.c index 807c9fd..bf9414f 100644 --- a/drivers/mtd/nand/mxs_nand.c +++ b/drivers/mtd/nand/mxs_nand.c @@ -237,7 +237,7 @@ static int mxs_nand_wait_for_bch_complete(void) int timeout = MXS_NAND_BCH_TIMEOUT; int ret; - ret = mx28_wait_mask_set(&bch_regs->hw_bch_ctrl_reg, + ret = mxs_wait_mask_set(&bch_regs->hw_bch_ctrl_reg, BCH_CTRL_COMPLETE_IRQ, timeout); writel(BCH_CTRL_COMPLETE_IRQ, &bch_regs->hw_bch_ctrl_clr); @@ -972,7 +972,7 @@ static int mxs_nand_scan_bbt(struct mtd_info *mtd) uint32_t tmp; /* Configure BCH and set NFC geometry */ - mx28_reset_block(&bch_regs->hw_bch_ctrl_reg); + mxs_reset_block(&bch_regs->hw_bch_ctrl_reg); /* Configure layout 0 */ tmp = (mxs_nand_ecc_chunk_cnt(mtd->writesize) - 1) @@ -1080,7 +1080,7 @@ int mxs_nand_init(struct mxs_nand_info *info) } /* Reset the GPMI block. */ - mx28_reset_block(&gpmi_regs->hw_gpmi_ctrl0_reg); + mxs_reset_block(&gpmi_regs->hw_gpmi_ctrl0_reg); /* * Choose NAND mode, set IRQ polarity, disable write protection and diff --git a/drivers/rtc/mxsrtc.c b/drivers/rtc/mxsrtc.c index 72f7400..ffefb91 100644 --- a/drivers/rtc/mxsrtc.c +++ b/drivers/rtc/mxsrtc.c @@ -41,7 +41,7 @@ int mxs_rtc_set_time(uint32_t secs) * is taken from the linux kernel driver for the STMP37xx RTC since * documentation doesn't mention it. */ - ret = mx28_wait_mask_clr(&rtc_regs->hw_rtc_stat_reg, + ret = mxs_wait_mask_clr(&rtc_regs->hw_rtc_stat_reg, 0x80 << RTC_STAT_STALE_REGS_OFFSET, MXS_RTC_MAX_TIMEOUT); if (ret) @@ -80,7 +80,7 @@ void rtc_reset(void) mxs_rtc_set_time(0); /* Reset the RTC block */ - ret = mx28_reset_block(&rtc_regs->hw_rtc_ctrl_reg); + ret = mxs_reset_block(&rtc_regs->hw_rtc_ctrl_reg); if (ret) printf("MXS RTC: Block reset timeout\n"); } diff --git a/drivers/spi/mxs_spi.c b/drivers/spi/mxs_spi.c index bd834fb..a037c13 100644 --- a/drivers/spi/mxs_spi.c +++ b/drivers/spi/mxs_spi.c @@ -139,7 +139,7 @@ int spi_claim_bus(struct spi_slave *slave) struct mxs_ssp_regs *ssp_regs = mxs_slave->regs; uint32_t reg = 0; - mx28_reset_block(&ssp_regs->hw_ssp_ctrl0_reg); + mxs_reset_block(&ssp_regs->hw_ssp_ctrl0_reg); writel(SSP_CTRL0_BUS_WIDTH_ONE_BIT, &ssp_regs->hw_ssp_ctrl0); @@ -193,7 +193,7 @@ static int mxs_spi_xfer_pio(struct mxs_spi_slave *slave, writel(SSP_CTRL0_RUN, &ssp_regs->hw_ssp_ctrl0_set); - if (mx28_wait_mask_set(&ssp_regs->hw_ssp_ctrl0_reg, + if (mxs_wait_mask_set(&ssp_regs->hw_ssp_ctrl0_reg, SSP_CTRL0_RUN, MXS_SPI_MAX_TIMEOUT)) { printf("MXS SPI: Timeout waiting for start\n"); return -ETIMEDOUT; @@ -205,7 +205,7 @@ static int mxs_spi_xfer_pio(struct mxs_spi_slave *slave, writel(SSP_CTRL0_DATA_XFER, &ssp_regs->hw_ssp_ctrl0_set); if (!write) { - if (mx28_wait_mask_clr(&ssp_regs->hw_ssp_status_reg, + if (mxs_wait_mask_clr(&ssp_regs->hw_ssp_status_reg, SSP_STATUS_FIFO_EMPTY, MXS_SPI_MAX_TIMEOUT)) { printf("MXS SPI: Timeout waiting for data\n"); return -ETIMEDOUT; @@ -215,7 +215,7 @@ static int mxs_spi_xfer_pio(struct mxs_spi_slave *slave, data++; } - if (mx28_wait_mask_clr(&ssp_regs->hw_ssp_ctrl0_reg, + if (mxs_wait_mask_clr(&ssp_regs->hw_ssp_ctrl0_reg, SSP_CTRL0_RUN, MXS_SPI_MAX_TIMEOUT)) { printf("MXS SPI: Timeout waiting for finish\n"); return -ETIMEDOUT; |