diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/dma/Makefile | 1 | ||||
-rw-r--r-- | drivers/dma/lpc32xx_dma.c | 147 |
2 files changed, 148 insertions, 0 deletions
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile index 4c8fcc2..f95fe70 100644 --- a/drivers/dma/Makefile +++ b/drivers/dma/Makefile @@ -10,3 +10,4 @@ obj-$(CONFIG_APBH_DMA) += apbh_dma.o obj-$(CONFIG_FSL_DMA) += fsl_dma.o obj-$(CONFIG_TI_KSNAV) += keystone_nav.o keystone_nav_cfg.o obj-$(CONFIG_TI_EDMA3) += ti-edma3.o +obj-$(CONFIG_DMA_LPC32XX) += lpc32xx_dma.o diff --git a/drivers/dma/lpc32xx_dma.c b/drivers/dma/lpc32xx_dma.c new file mode 100644 index 0000000..955adfe --- /dev/null +++ b/drivers/dma/lpc32xx_dma.c @@ -0,0 +1,147 @@ +/* + * Copyright (C) 2008 by NXP Semiconductors + * @Author: Kevin Wells + * @Descr: LPC3250 DMA controller interface support functions + * + * Copyright (c) 2015 Tyco Fire Protection Products. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <errno.h> +#include <asm/arch/dma.h> +#include <asm/arch/cpu.h> +#include <asm/arch/clk.h> +#include <asm/arch/sys_proto.h> +#include <asm/io.h> + +/* DMA controller channel register structure */ +struct dmac_chan_reg { + u32 src_addr; + u32 dest_addr; + u32 lli; + u32 control; + u32 config_ch; + u32 reserved[3]; +}; + +/* DMA controller register structures */ +struct dma_reg { + u32 int_stat; + u32 int_tc_stat; + u32 int_tc_clear; + u32 int_err_stat; + u32 int_err_clear; + u32 raw_tc_stat; + u32 raw_err_stat; + u32 chan_enable; + u32 sw_burst_req; + u32 sw_single_req; + u32 sw_last_burst_req; + u32 sw_last_single_req; + u32 config; + u32 sync; + u32 reserved[50]; + struct dmac_chan_reg dma_chan[8]; +}; + +#define DMA_NO_OF_CHANNELS 8 + +/* config register definitions */ +#define DMAC_CTRL_ENABLE (1 << 0) /* For enabling the DMA controller */ + +static u32 alloc_ch; + +static struct dma_reg *dma = (struct dma_reg *)DMA_BASE; + +int lpc32xx_dma_get_channel(void) +{ + int i; + + if (!alloc_ch) { /* First time caller */ + /* + * DMA clock are enable by "lpc32xx_dma_init()" and should + * be call by board "board_early_init_f()" function. + */ + + /* + * Make sure DMA controller and all channels are disabled. + * Controller is in little-endian mode. Disable sync signals. + */ + writel(0, &dma->config); + writel(0, &dma->sync); + + /* Clear interrupt and error statuses */ + writel(0xFF, &dma->int_tc_clear); + writel(0xFF, &dma->raw_tc_stat); + writel(0xFF, &dma->int_err_clear); + writel(0xFF, &dma->raw_err_stat); + + /* Enable DMA controller */ + writel(DMAC_CTRL_ENABLE, &dma->config); + } + + i = ffz(alloc_ch); + + /* Check if all the available channels are busy */ + if (unlikely(i == DMA_NO_OF_CHANNELS)) + return -1; + alloc_ch |= BIT_MASK(i); + return i; +} + +int lpc32xx_dma_start_xfer(unsigned int channel, + const struct lpc32xx_dmac_ll *desc, u32 config) +{ + if (unlikely(((BIT_MASK(channel) & alloc_ch) == 0) || + (channel >= DMA_NO_OF_CHANNELS))) { + error("Request for xfer on unallocated channel %d", channel); + return -1; + } + writel(BIT_MASK(channel), &dma->int_tc_clear); + writel(BIT_MASK(channel), &dma->int_err_clear); + writel(desc->dma_src, &dma->dma_chan[channel].src_addr); + writel(desc->dma_dest, &dma->dma_chan[channel].dest_addr); + writel(desc->next_lli, &dma->dma_chan[channel].lli); + writel(desc->next_ctrl, &dma->dma_chan[channel].control); + writel(config, &dma->dma_chan[channel].config_ch); + + return 0; +} + +int lpc32xx_dma_wait_status(unsigned int channel) +{ + unsigned long start; + u32 reg; + + /* Check if given channel is valid */ + if (unlikely(channel >= DMA_NO_OF_CHANNELS)) { + error("Request for status on unallocated channel %d", channel); + return -1; + } + + start = get_timer(0); + while (1) { + reg = readl(&dma->raw_tc_stat); + reg |= readl(dma->raw_err_stat); + if (reg & BIT_MASK(channel)) + break; + + if (get_timer(start) > CONFIG_SYS_HZ) { + error("DMA status timeout channel %d\n", channel); + return -ETIMEDOUT; + } + udelay(1); + } + + if (unlikely(readl(&dma->raw_err_stat) & BIT_MASK(channel))) { + setbits_le32(&dma->int_err_clear, BIT_MASK(channel)); + setbits_le32(&dma->raw_err_stat, BIT_MASK(channel)); + error("DMA error on channel %d\n", channel); + return -1; + } + setbits_le32(&dma->int_tc_clear, BIT_MASK(channel)); + setbits_le32(&dma->raw_tc_stat, BIT_MASK(channel)); + return 0; +} |