diff options
Diffstat (limited to 'drivers/video/ssd2828.h')
-rw-r--r-- | drivers/video/ssd2828.h | 11 |
1 files changed, 8 insertions, 3 deletions
diff --git a/drivers/video/ssd2828.h b/drivers/video/ssd2828.h index 14b96c5..1af6fa4 100644 --- a/drivers/video/ssd2828.h +++ b/drivers/video/ssd2828.h @@ -47,8 +47,12 @@ struct ssd2828_config { * to TX_CLK_XIO/TX_CLK_XIN pins), which is necessary at least for * clocking SPI after reset. The exact clock speed is not strictly, * defined, but the datasheet says that it must be somewhere in the - * 8MHz - 30MHz range (see "TX_CLK Timing" section). It is used as - * a reference clock for PLL and must be set correctly. + * 8MHz - 30MHz range (see "TX_CLK Timing" section). It can be also + * used as a reference clock for PLL. If the exact clock frequency + * is known, then it can be specified here. If it is unknown, or the + * information is not trustworthy, then it can be set to 0. + * + * If unsure, set to 0. */ int ssd2828_tx_clk_khz; @@ -115,7 +119,8 @@ struct ssd2828_config { * The right place to insert this function call is after the parallel LCD * interface is initialized and before turning on the backlight. This is * advised in the "Example for system sleep in and out" section of the - * SSD2828 datasheet. + * SSD2828 datasheet. And also SS2828 may use 'pclk' as the clock source + * for PLL, which means that the input signal must be already there. */ int ssd2828_init(const struct ssd2828_config *cfg, const struct ctfb_res_modes *mode); |